AC-MEDIA-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TAddress, DisplayString, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC IpAddress FROM RFC1155-SMI Unsigned32, Integer32, enterprises FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB audioCodes, acRegistrations, acGeneric, acProducts,acBoardMibs FROM AUDIOCODES-TYPES-MIB; acMedia MODULE-IDENTITY LAST-UPDATED "201207260501Z" --Thursday, July 26 2012 ORGANIZATION "AudioCodes Ltd" CONTACT-INFO "Postal: Support AudioCodes LTD 1 Hayarden Street Airport City Lod, ISRAEL 70151 Tel: 972-3-9764000 Fax: 972-3-9764040 Email: support@audiocodes.com Web: www.audiocodes.com" DESCRIPTION "" ::= {acBoardMibs 4} acMediaConfiguration OBJECT IDENTIFIER ::= {acMedia 1} acMediaDSPConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 1} acMediaDSPConfigVersionTemplateNumber OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the DSP load number. Each load has a different coder list, a different channel capacity and different features supported. Range = 0 to 255. Access: Offline. AC INI-Param: DSPVERSIONTEMPLATENUMBER" ::= {acMediaDSPConfig 1} -- **************************************** -- acMediaDsp table declaration -- **************************************** acMediaDspTable OBJECT-TYPE SYNTAX SEQUENCE OF AcMediaDspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acMediaDSPConfig 21} -- **************************************** -- acMediaDsp table entry -- **************************************** acMediaDspEntry OBJECT-TYPE SYNTAX AcMediaDspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acMediaDspIndex} ::= {acMediaDspTable 1} -- **************************************** -- acMediaDsp TABLE -- **************************************** AcMediaDspEntry ::= SEQUENCE { acMediaDspIndex Unsigned32, acMediaDspRowStatus RowStatus, acMediaDspTemplateNumber Unsigned32, acMediaDspResourcesPercentage Unsigned32 } acMediaDspIndex OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry number in the table. AC INI-Param: DspTemplates_Index" ::= {acMediaDspEntry 1} acMediaDspRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A" ::= {acMediaDspEntry 2} acMediaDspTemplateNumber OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-create STATUS current DESCRIPTION "DSP template number. Access: Offline. AC INI-Param: DspTemplates_DspTemplateNumber" ::= {acMediaDspEntry 3} acMediaDspResourcesPercentage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "Percentage use for the specified template. Access: Offline. AC INI-Param: DspTemplates_DspResourcesPercentage" ::= {acMediaDspEntry 4} acMediaVoiceConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 2} acVoice OBJECT IDENTIFIER ::= {acMediaVoiceConfig 1} acVoicePayloadFormat OBJECT-TYPE SYNTAX INTEGER { voicePayloadFormatRTP(0) , voicePayloadFormatATM(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the voice payload format. Choose either 0 = RTP or 1 = ATM (which enables working with vendors that use G.726 ATM Payload Format over RTP. Uses the enum acTVoicePayloadFormat. 0 = VoicePayloadFormatRTP 1 = VoicePayloadFormatATM 2 = VoicePAyloadFormatIllegal. Access: Online. AC INI-Param: VOICEPAYLOADFORMAT" ::= {acVoice 1} acVoiceVolume OBJECT-TYPE SYNTAX Integer32 (-32..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the voice output gain control. Range: -32 dB to +31 dB in 1 dB steps -32 = mute Default = 0 = No Gain. Access: Online. AC INI-Param: VOICEVOLUME" ::= {acVoice 2} acVoiceInputGain OBJECT-TYPE SYNTAX Integer32 (-32..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the PCM input gain. Range = -32 dB to +31 dB in 1 dB steps. Default = No Gain. Access: Online. AC INI-Param: INPUTGAIN" ::= {acVoice 3} acVoiceTestMode OBJECT-TYPE SYNTAX INTEGER { coderLoopback(0) , pCMLoopback(1) , toneInjection(2) , noLoopback(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the type of testing mode applied: 0 = Coder Loopback performs an encoder/decoder loopback inside the DSP device 1 = PCM Loopback loops back an incoming PCM to the outgoing PCM. 2 = ToneInjection generates a 1000 Hz tone to the outgoing PCM 3 = NoLoopback sets the channel to work in normal mode. Access: Online. AC INI-Param: TESTMODE" ::= {acVoice 4} acVoiceTTYTransportType OBJECT-TYPE SYNTAX INTEGER { disable(0) , inband-Relay(2) , bypass (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the transferring method of TTY signals during a call 0 = Disable 1= Bypass 2 = Relay . Access: Online. AC INI-Param: TTYTRANSPORTTYPE" ::= {acVoice 5} acVoiceEnableMediaSecurity OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Media Security protocol (SRTP) . Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLEMEDIASECURITY" ::= {acVoice 6} acVoiceAriaProtocolSupport OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Aria encryption protocol. Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable Supported on TP6310, TP8410 and M800. Access: Offline. AC INI-Param: AriaProtocolSupport" ::= {acVoice 7} acVoiceCoderRate OBJECT IDENTIFIER ::= {acVoice 20} acVoiceCoderRateEVRC OBJECT-TYPE SYNTAX INTEGER { variableRate(0) , ac1kbps(1) , ac4kbps(2) , ac8kbps(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used to configure the EVRC coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 4 kbps 3 = 8 kbps. Access: Online. AC INI-Param: EVRCRate" ::= {acVoiceCoderRate 1} acVoiceCoderRateQCELP8 OBJECT-TYPE SYNTAX INTEGER { variableRate(0) , ac1kbps(1) , ac2kbps(2) , ac4kbps(3) , ac8kbps(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used to configure the QCELP8 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 2 kbps 3 = 4 kbps 4 = 8 kbps. Access: Online. AC INI-Param: QCELP8Rate" ::= {acVoiceCoderRate 2} acVoiceCoderRateQCELP13 OBJECT-TYPE SYNTAX INTEGER { variableRate(0) , ac1kbps(1) , ac3kbps(2) , ac7kbps(3) , ac13kbps(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used to configure the QCELP13 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 3 kbps 3 = 7 kbps 4 = 13 kbps . Access: Online. AC INI-Param: QCELP13Rate" ::= {acVoiceCoderRate 3} acVoiceCoderRateG729EVMaxBitRate OBJECT-TYPE SYNTAX INTEGER { g729EV-RATE-8-KBPS (0) , g729EV-RATE-12-KBPS (1) , g729EV-RATE-14-KBPS (2) , g729EV-RATE-16-KBPS (3) , g729EV-RATE-18-KBPS (4) , g729EV-RATE-20-KBPS (5) , g729EV-RATE-22-KBPS (6) , g729EV-RATE-24-KBPS (7) , g729EV-RATE-26-KBPS (8) , g729EV-RATE-28-KBPS (9) , g729EV-RATE-30-KBPS (10) , g729EV-RATE-32-KBPS (11) , g729EV-RATE-UNDEFINED (15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the maximum generation bitrate for all participants in a session using G729EV coder. This parameter is defined per session and is equal for all the parties. The initial generation bit rate is the minimum between the MaxBitRate and the MBS values. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVMaxBitRate" ::= {acVoiceCoderRate 4} acVoiceCoderRateG729EVLocalMBS OBJECT-TYPE SYNTAX INTEGER { g729EV-RATE-8-KBPS (0) , g729EV-RATE-12-KBPS (1) , g729EV-RATE-14-KBPS (2) , g729EV-RATE-16-KBPS (3) , g729EV-RATE-18-KBPS (4) , g729EV-RATE-20-KBPS (5) , g729EV-RATE-22-KBPS (6) , g729EV-RATE-24-KBPS (7) , g729EV-RATE-26-KBPS (8) , g729EV-RATE-28-KBPS (9) , g729EV-RATE-30-KBPS (10) , g729EV-RATE-32-KBPS (11) , g729EV-RATE-UNDEFINED (15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the maximal bitrate, which may be used by the G729EV coder at a specific channel. This parameter is defined per channel and may vary between the parties. The initial generation bit rate is the minimum between the MaxBitRate and the MBS values. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVLocalMBS" ::= {acVoiceCoderRate 5} acVoiceCoderRateG729EVReceiveMBS OBJECT-TYPE SYNTAX INTEGER { g729EV-RATE-8-KBPS (0) , g729EV-RATE-12-KBPS (1) , g729EV-RATE-14-KBPS (2) , g729EV-RATE-16-KBPS (3) , g729EV-RATE-18-KBPS (4) , g729EV-RATE-20-KBPS (5) , g729EV-RATE-22-KBPS (6) , g729EV-RATE-24-KBPS (7) , g729EV-RATE-26-KBPS (8) , g729EV-RATE-28-KBPS (9) , g729EV-RATE-30-KBPS (10) , g729EV-RATE-32-KBPS (11) , g729EV-RATE-UNDEFINED (15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the value of the MBS field of the G729EV frames to be sent to the other party. This parameter reflects the maximum bit rate, which the local G729EV supports as a receiver. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVReceiveMBS" ::= {acVoiceCoderRate 6} acVoiceCoderRateMsRtaForwardErrorCorrectionEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the Microsoft RTA coder forward error correction mode. 0 - Disable. 1 - Enable. Access: Online. AC INI-Param: MSRTAForwardErrorCorrectionEnable" ::= {acVoiceCoderRate 7} acVoiceCoderRateMsRtaTxBitRate OBJECT-TYPE SYNTAX Unsigned32 (0..29000) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the Microsoft RTA coder TX bit rate. 0 - Automatic. Any value between 8,800 - 29,000. Access: Online. AC INI-Param: MSRTATxBitRate" ::= {acVoiceCoderRate 8} acVoiceCoderRateSilkTxInbandFEC OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the SILK encoder forward error correction mode. Access: Online. AC INI-Param: SilkTxInbandFEC" ::= {acVoiceCoderRate 9} acVoiceCoderRateSilkMaxAverageBitRate OBJECT-TYPE SYNTAX Unsigned32 (5000..30000) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the SILK encoder maximal average bit rate. Narrow band range is 5000-16000 .Wide band range is 8000-30000. Access: Online. AC INI-Param: SilkMaxAverageBitRate" ::= {acVoiceCoderRate 10} acVoiceCoderRateSpeexNBBitRate OBJECT-TYPE SYNTAX INTEGER { cE-SPEEX-NB-RATE-2-15-KBPS(1) , cE-SPEEX-NB-RATE-5-95-KBPS(2) , cE-SPEEX-NB-RATE-8-00-KBPS(3) , cE-SPEEX-NB-RATE-11-0-KBPS(4) , cE-SPEEX-NB-RATE-15-0-KBPS(5) , cE-SPEEX-NB-RATE-18-2-KBPS(6) , cE-SPEEX-NB-RATE-24-6-KBPS(7) , cE-SPEEX-NB-RATE-3-95-KBPS(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the bitrate of Speex NB coder. Access: Instant. AC INI-Param: SpeexNBBitRate" ::= {acVoiceCoderRate 11} acVoiceCoderRateSpeexWBBitRate OBJECT-TYPE SYNTAX INTEGER { cE-SPEEX-WB-RATE-3-95-KBPS(0) , cE-SPEEX-WB-RATE-5-75-KBPS(1) , cE-SPEEX-WB-RATE-7-75-KBPS(2) , cE-SPEEX-WB-RATE-9-80-KBPS(3) , cE-SPEEX-WB-RATE-12-8-KBPS(4) , cE-SPEEX-WB-RATE-16-8-KBPS(5) , cE-SPEEX-WB-RATE-20-6-KBPS(6) , cE-SPEEX-WB-RATE-23-8-KBPS(7) , cE-SPEEX-WB-RATE-27-8-KBPS(8) , cE-SPEEX-WB-RATE-34-2-KBPS(9) , cE-SPEEX-WB-RATE-42-2-KBPS(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the bitrate of Speex WB coder. Access: Instant. AC INI-Param: SpeexWBBitRate" ::= {acVoiceCoderRate 12} acVoiceAGC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 2} acVoiceAGCEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Activates the AGC (Automatic Gain Control). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEAGC" ::= {acVoiceAGC 1} acVoiceAGCGainSlope OBJECT-TYPE SYNTAX Unsigned32 (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AGC (Automatic Gain Control) convergence rate. Range = 0 to 31 (according to acTAGCGainSlope) Default = 3 (= 1 db/sec). Access: Online. AC INI-Param: AGCGAINSLOPE" ::= {acVoiceAGC 2} acVoiceAGCRedirection OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AGC (Automatic Gain Control) direction. 0 = AGC works on signals from the TDM side 1 = AGC works on signals coming from the Network side. Access: Online. AC INI-Param: AGCREDIRECTION" ::= {acVoiceAGC 3} acVoiceAGCTargetEnergy OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the signal energy value [-dBm] that the AGC (Automatic Gain Control) attempts to attain. Range = 0 to 63. Access: Online. AC INI-Param: AGCTARGETENERGY" ::= {acVoiceAGC 4} acVoiceAGCMinGain OBJECT-TYPE SYNTAX Unsigned32 (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the minimum gain by the AGC when activated [- db]. Range = 0 to -31. Access: Offline. AC INI-Param: AGCMINGAIN" ::= {acVoiceAGC 5} acVoiceAGCMaxGain OBJECT-TYPE SYNTAX Unsigned32 (0..18) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the maximum gain by the AGC when activated [db]. Range = 0 to 18. Access: Offline. AC INI-Param: AGCMAXGAIN" ::= {acVoiceAGC 6} acVoiceAGCDisableFastAdaptation OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Disables the AGC Fast Adaptation mode. Enable = 1 Disable = 0. Access: Offline. AC INI-Param: AGCDISABLEFASTADAPTATION" ::= {acVoiceAGC 7} acVoiceEC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 3} acVoiceECEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the Echo Canceller. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEECHOCANCELLER" ::= {acVoiceEC 1} acVoiceECMaxLength OBJECT-TYPE SYNTAX INTEGER { eCLengthDefault(0) , eCLength15MSec(1) , eCLength20MSec(2) , eCLength25MSec(3) , eCLength32MSec(4) , eCLength35MSec(5) , eCLength40MSec(6) , eCLength45MSec(7) , eCLength50MSec(8) , eCLength55MSec(9) , eCLength60MSec(10) , eCLength64MSec(11) , eCLength128MSec(22) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the maximum board EC (Echo Canceler) length capability. 0 = EC length determined internally to reach maximum channel capacity. 4 = 32 msec 11 = 64 msec 22 = 128 msec TP-1610 only: Using 64 or 128 msec reduces the channel capacity to 200 channels. . Access: Offline. AC INI-Param: MAXECHOCANCELLERLENGTH" ::= {acVoiceEC 2} acVoiceECHybridLoss OBJECT-TYPE SYNTAX INTEGER { eCHybridLoss6DBM(0) , eCHybridLoss0DBM(2) , eCHybridLoss3DBM(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the worst case ratio between the signal level transmitted to the hybrid and the echo level returning from hybrid. Set this per worst hybrid in the system in terms of echo return loss. Refer to the enumeration acTECHybridLoss. 0 = 6 dBm 2 = 0 dBm 3 = 3 dBm. Access: Online. AC INI-Param: ECHYBRIDLOSS" ::= {acVoiceEC 3} acVoiceECToneDetector OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the Echo Canceler Tone Detector. Detects a 2100 Hz tone at the input signal to the TDM (received signal). Improves Echo Canceler operation accordingly. Detects 2100, 2100 with phase reversals and 2100 with AM. Improves the operation of the Echo Canceler by slowing adaptation when the signal is detected. This data is also used by the fax state machine. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ECEnableToneDetector" ::= {acVoiceEC 4} acVoiceECComfortNoiseGeneration OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use this parameter to enable or enable Echo Canceler Comfort Noise Generation, which generates comfort noise when the Non Linear Processor (NLP) is active. When the NLP ascertains that the signal is echo and not doubletalk and decides to clip, instead of transmitting silence it transmits a synthesized signal similar to the background noise. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ECEnableComfortNoiseGeneration" ::= {acVoiceEC 5} acVoiceSC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 4} acVoiceSCMode OBJECT-TYPE SYNTAX INTEGER { sILENCE-COMPRESION-DISABLE(0) , sILENCE-COMPRESION-ENABLE(1) , sILENCE-COMPRESION-ENABLE-NOISE-ADAPTATION-DISABLE(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Silence Suppression Mode. 0 = Disable = SILENCE_COMPRESION_DISABLE 1 = Enable = SILENCE_COMPRESION_ENABLE 2 = Enable without adaptation = SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLE. Access: Online. AC INI-Param: ENABLESILENCECOMPRESSION" ::= {acVoiceSC 1} acVoiceSCVBRCoderDTXMin OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the minimum number of frames gap between two SID frames, when using the EVRC voice activity detector. . Access: Online. AC INI-Param: EVRCDTXMin" ::= {acVoiceSC 2} acVoiceSCVBRCoderDTXMax OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the maximum number of frames gap between two SID frames, when using the EVRC voice activity detector. Access: Online. AC INI-Param: EVRCDTXMax" ::= {acVoiceSC 3} acVoiceSCVBRCoderHangover OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "For indicating the desired number of silence frames at the beginning of each silence period, when using the VBR CODER silence suppression. . Access: Online. AC INI-Param: VBRCoderHangover" ::= {acVoiceSC 4} acMediaFaxModemConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 3} acFaxModem OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 1} acFMCommon OBJECT IDENTIFIER ::= {acFaxModem 1} acFMCommonRelayVolume OBJECT-TYPE SYNTAX Integer32 (-18..-3) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the fax gain control. The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps of 1 dBm. Access: Online. AC INI-Param: FAXMODEMRELAYVOLUME" ::= {acFMCommon 1} acFMCommonV34Transport OBJECT-TYPE SYNTAX INTEGER { disable(0) , relayEnable(1) , byPassEnable(2) , eventsOnly(3) , ansMute(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the V.34 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V34MODEMTRANSPORTTYPE" ::= {acFMCommon 2} acFMCommonEnableInbandNetworkDetection OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables inband network detection related to fax/modem. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: EnableFaxModemInbandNetworkDetection" ::= {acFMCommon 3} acFMCommonCEDTransferMode OBJECT-TYPE SYNTAX INTEGER { usingFaxRelayOrVBD(0) , voiceModeOrVBD(1) , rFC4733BlockingRTPVBD(2) , rFC4733AlongWithRTPVBD(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - transfer CED using T38. 1 - transfer CED over VBD(some Vxx=2) or VoIP(Vxx=0). 2 - transfer CED using RFC, and block CED over VBD/VoIP. 3 - transfer CED using RFC in parallel with CED over VBD/VoIP. Access: Instant. AC INI-Param: CEDTransferMode" ::= {acFMCommon 4} acFMBypass OBJECT IDENTIFIER ::= {acFaxModem 2} acFMBypassCoderType OBJECT-TYPE SYNTAX INTEGER { g711Alaw-64(0) , g711Mulaw(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Users can use this parameter to set the fax/modem bypass coder (according to acTCoders). 0 = G.711 A-Law 1 = G.711 Mu-Law. Access: Online. AC INI-Param: FAXMODEMBYPASSCODERTYPE" ::= {acFMBypass 1} acFMBypassPacketizationPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the number of basic frames to generate one RTP fax/modem bypass packet. Access: Online. AC INI-Param: FAXMODEMBYPASSM" ::= {acFMBypass 2} acFMBypassBasicPacketInterval OBJECT-TYPE SYNTAX INTEGER { pACKET-INTERVAL-DEFAULT(0) , pACKET-INTERVAL-5-MSEC(1) , pACKET-INTERVAL-10-MSEC(2) , pACKET-INTERVAL-20-MSEC(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the basic Fax / Modem Bypass RTP packet rate. 0 = Default (set internally) (PACKET_INTERVAL_DEFAULT) 1 = 5 msec (PACKET_INTERVAL_5_MSEC) 2 = 10 msec (PACKET_INTERVAL_10_MSEC) 3 = 20 msec (PACKET_INTERVAL_20_MSEC). Access: Online. AC INI-Param: FAXMODEMBYPASSBASICRTPPACKETINTERVAL" ::= {acFMBypass 3} acFMBypassDJBufMinDelay OBJECT-TYPE SYNTAX Unsigned32 (0..150) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the Jitter Buffer constant delay (in milliseconds) during a Fax & Modem Bypass session. (The minimum Jitter Buffer Size). Range = 0 to 150. Access: Online. AC INI-Param: FAXMODEMBYPASDJBUFMINDELAY" ::= {acFMBypass 4} acFMBypassFaxBypassOutputGain OBJECT-TYPE SYNTAX Integer32 (-31..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the fax bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: FaxBypassOutputGain" ::= {acFMBypass 5} acFMBypassModemBypassOutputGain OBJECT-TYPE SYNTAX Integer32 (-31..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the modem bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: ModemBypassOutputGain" ::= {acFMBypass 6} acFMNSE OBJECT IDENTIFIER ::= {acFaxModem 3} acFMNSEPayloadType OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Users can use this parameter to modify the NSE packet's payload type. Range = 96 to 127. Access: Online. AC INI-Param: NSEPAYLOADTYPE" ::= {acFMNSE 1} acFMNSEMode OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Cisco's NSE fax / modem automatic pass-through mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: NSEMODE" ::= {acFMNSE 2} acFax OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 2} acFaxTransportMode OBJECT-TYPE SYNTAX INTEGER { disable(0) , relayEnable(1) , byPassEnable(2) , eventsOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Fax over IP transport method. 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: FAXTRANSPORTMODE" ::= {acFax 1} acFaxBypassPayloadType OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Users can use this parameter to modify the Fax Bypass Mode RTP packet's payload type. In the case of congestion (if the selected payload type is already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR is issued and the payload type is set to the default value (102). It is the user's responsibility to avoid congestion with other payload types. Range = 0 to 127. Access: Online. AC INI-Param: FAXBYPASSPAYLOADTYPE" ::= {acFax 2} acFaxRelayECMEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the using of ECM mode during Fax Relay. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: FAXRELAYECMENABLE" ::= {acFax 3} acFaxRelayMaxRate OBJECT-TYPE SYNTAX INTEGER { acRate2400bps(0) , acRate4800bps(1) , acRate7200bps(2) , acRate9600bps(3) , acRate12000bps(4) , acRate14400bps(5) , acRate16800bps(6) , acRate19200b(7) , acRate21600bps(8) , acRate24000bps(9) , acRate26400bps(10) , acRate28800bps(11) , acRate31200bps(12) , acRate33600bps(13) } MAX-ACCESS read-write STATUS current DESCRIPTION "Limits the maximum rate at which fax messages are transmitted. 0 = 2400 bps 1 = 4800 bps 2 = 7200 bps 3 = 9600 bps 4 = 12000 bps 5 = 14400 bps 6 = 16800 bps 7 = 19200 bps 8 = 21600 bps 9 = 24000 bps 10 = 26400 bps 11 = 28800 bps 12 = 31200 bps 13 = 33600 bps. Access: Online. AC INI-Param: FAXRELAYMAXRATE" ::= {acFax 4} acFaxRelayRedundancyDepth OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the depth of redundancy for fax packets. This parameter is applicable only to non-V.21 packets. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 packet redundancy. Access: Online. AC INI-Param: FAXRELAYREDUNDANCYDEPTH" ::= {acFax 5} acFaxEnhancedRelayRedundancyDepth OBJECT-TYPE SYNTAX Unsigned32 (0..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the number of repetitions to be applied to control packets when using the T.38 standard. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 packet redundancy 3 = 3 packet redundancy 4 = Maximum redundancy. Access: Online. AC INI-Param: FAXRELAYENHANCEDREDUNDANCYDEPTH" ::= {acFax 6} acFaxCNGDetectorMode OBJECT-TYPE SYNTAX INTEGER { cNG-DETECTOR-MODE-DISABLE(0) , cNG-DETECTOR-MODE-RELAY(1) , cNG-DETECTOR-MODE-EVENT-ONLY(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the CNG Detector mode. 0 = Disable 1 = Relay 2 = Event Only. Access: Online. AC INI-Param: CNGDETECTORMODE" ::= {acFax 7} acFaxV34TransportMethod OBJECT-TYPE SYNTAX INTEGER { disable(0) , relayEnable(1) , byPassEnable(2) , eventsOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the V.34 fax transport method. One of the following values: 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V34FAXTRANSPORTTYPE" ::= {acFax 8} acFaxT38Version OBJECT-TYPE SYNTAX INTEGER { t38Version0(0) , t38Version3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "T38 fax relay version. 0 = T.38 version 0 (from 06/1998) 3 = T.38 version 3 (V.34 over T.38 support) Default = 3. Access: Online. AC INI-Param: T38Version" ::= {acFax 9} acModem OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 3} acModemV22Transport OBJECT-TYPE SYNTAX INTEGER { disable(0) , relayEnable(1) , byPassEnable(2) , eventsOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the V.22 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V22MODEMTRANSPORTTYPE" ::= {acModem 1} acModemV23Transport OBJECT-TYPE SYNTAX INTEGER { disable(0) , relayEnable(1) , byPassEnable(2) , eventsOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the V.23 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V23MODEMTRANSPORTTYPE" ::= {acModem 2} acModemV32Transport OBJECT-TYPE SYNTAX INTEGER { disable(0) , relayEnable(1) , byPassEnable(2) , eventsOnly(3) , ansMute(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the V.32 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V32MODEMTRANSPORTTYPE" ::= {acModem 3} acModemBypassPayloadType OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Users can use this parameter to modify the Modem Bypass Mode RTP packet's payload type. In the case of congestion (if the selected payload type is already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR is issued and the payload type is set to the default value (103). It is the user's responsibility to avoid congestion with other payload types. Range = 0 to 127. Access: Online. AC INI-Param: MODEMBYPASSPAYLOADTYPE" ::= {acModem 4} acModemBellTransportType OBJECT-TYPE SYNTAX INTEGER { disable(0) , byPassEnable(2) , eventsOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use this parameter to set the Bell modem transport method. 0 = Transparent 2 = Bypass (enum ByPassEnable) 3 = Transparent with Events (enum EventsOnly). Access: Online. AC INI-Param: BellModemTransportType" ::= {acModem 5} acModemV21Transport OBJECT-TYPE SYNTAX INTEGER { disable(0) , relayEnable(1) , byPassEnable(2) , eventsOnly(3) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Sets the V.21 modem transport method (must be set to 0 = Disable). 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V21ModemTransportType" ::= {acModem 6} acModemEnableV150ModemRelaySupport OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Determines whether to enable V.150.1 modem relay support. Range: 0 - Disable 1 - Enable. Access: Offline. AC INI-Param: EnableV150ModemRelaySupport" ::= {acModem 7} acV150dot1 OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 4} acV150dot1AllocationProfile OBJECT-TYPE SYNTAX Unsigned32 (0..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the V.150.1 profile, determining how many DSP channels have V.150.1 support. Range = 0 to 3. Access: Offline. AC INI-Param: V1501AllocationProfile" ::= {acV150dot1 1} acV150dot1SSEPayloadTypeRx OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "SSE payload type RX. Access: Online. AC INI-Param: V1501SSEPayloadTypeRx" ::= {acV150dot1 2} acV150dot1SSEPayloadTypeTx OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "SSE payload type TX. Access: Online. AC INI-Param: V1501SSEPayloadTypeTx" ::= {acV150dot1 3} acV150dot1SSERedundancyDepth OBJECT-TYPE SYNTAX Unsigned32 (1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "SSE is a part of V150.1 modem relay protocol and SSE messages are sent over RTP. SSE redundancy refers to the sending of SSE messages several times to increase reliability. This parameter determines the number of times each SSE message is to be resent. Access: Online. AC INI-Param: V1501SSERedundancyDepth" ::= {acV150dot1 4} acV150dot1SPRTPayloadTypeRx OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "SPRT payload type RX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeRx" ::= {acV150dot1 5} acV150dot1SPRTPayloadTypeTx OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "SPRT payload type TX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeTx" ::= {acV150dot1 6} acV150dot1SPRTTransportChannel0MaxPayloadSize OBJECT-TYPE SYNTAX Unsigned32 (140..256) MAX-ACCESS read-write STATUS current DESCRIPTION "SPRT transport channel 0 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel0MaxPayloadSize" ::= {acV150dot1 7} acV150dot1SPRTTransportChannel2MaxPayloadSize OBJECT-TYPE SYNTAX Unsigned32 (132..256) MAX-ACCESS read-write STATUS current DESCRIPTION "SPRT transport channel 2 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxPayloadSize" ::= {acV150dot1 8} acV150dot1SPRTTransportChannel2MaxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (8..32) MAX-ACCESS read-write STATUS current DESCRIPTION "SPRT transport channel 2 max window size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxWindowSize" ::= {acV150dot1 9} acV150dot1SPRTTransportChannel3MaxPayloadSize OBJECT-TYPE SYNTAX Unsigned32 (140..256) MAX-ACCESS read-write STATUS current DESCRIPTION "SPRT transport channel 3 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel3MaxPayloadSize" ::= {acV150dot1 10} acMediaRtpRtcpConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 4} acRtpRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 1} acRtpRtcpBrokenConnectionEventTimeout OBJECT-TYPE SYNTAX Unsigned32 (3..2684354) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines for how long the RTP connection should be broken before the Broken Connection event is issued. In units of 100 msec. . Access: Online. AC INI-Param: BROKENCONNECTIONEVENTTIMEOUT" ::= {acRtpRtcp 1} acRtpRtcpBrokenConnectionEventActivationMode OBJECT-TYPE SYNTAX INTEGER { afterFirstIncomingRTPPacket(0) , onRTPStreamActivation(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines if the broken connection mechanism is activated when the RTP stream is activated or when the first RTP packet is received. 0 = After First incoming packet (default) 1 = Upon channel’s RTP activation. . Access: Online. AC INI-Param: BROKENCONNECTIONEVENTACTIVATIONMODE" ::= {acRtpRtcp 2} acRtpRtcpBasicRTPPacketInterval OBJECT-TYPE SYNTAX INTEGER { pACKET-INTERVAL-DEFAULT(0) , pACKET-INTERVAL-5-MSEC(1) , pACKET-INTERVAL-10-MSEC(2) , pACKET-INTERVAL-20-MSEC(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the RTP packet rate for sample based coders (such as G.711, G.726, G.727). Also applicable for G.729, G.729E & G.728. 0 = Default (set internally) 1 = 5 msec 2 = 10 msec 3 = 20 msec. Access: Online. AC INI-Param: BASICRTPPACKETINTERVAL" ::= {acRtpRtcp 3} acRtpRtcpConnectionEstablishNotificationMode OBJECT-TYPE SYNTAX INTEGER { afterBrokenConnection(0) , uponFirstRTPFrameDetection(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the notification mode for the RTP connection establishment event acEV_CONNECTION_ESTABLISHED. 0 = Notify only after a broken connection event 1 = Also notify when the first RTP packet is received. Access: Online. AC INI-Param: CONNECTIONESTABLISHEMENTNOTIFICATIONMODE" ::= {acRtpRtcp 4} acRtpRtcpEnableMediaUDPChecksum OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether to enable the UDP checksum calculation for RTP media TX over IPv4. One of the following possible values: 0 = Disable (No checksum: UDP checksum for IPv4 TX = 0) 1 = Enable (UDP checksum will be in the UDP header upon IPv4 TX) . Access: Offline. AC INI-Param: EnableMediaUDPChecksum" ::= {acRtpRtcp 5} acRtp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 2} acRtpBaseUDPPort OBJECT-TYPE SYNTAX Unsigned32 (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the lower boundary of UDP ports to be used by the board. The upper boundary is calculated on the basis of BoardBaseUDPPort + 10 * (Number of Channels). This parameter value must be a multiple of 10. . Access: Offline. AC INI-Param: BASEUDPPORT" ::= {acRtp 1} acRtpComfortNoiseEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to 1 (Enable), SID packets are sent with the RTP SID type (RFC 3389). 0 = Disable 1 = Enable Determines whether Silence Indicator (SID) packets that are sent and received are according to RFC 3389. 0 = Disabled (default). 1 = Enabled. Note: Applicable only to MP-11x and Mediant 1000. . Access: Online. AC INI-Param: ENABLESTANDARDSIDPAYLOADTYPE" ::= {acRtp 2} acRtpEnableRFC2658Interleaving OBJECT-TYPE SYNTAX INTEGER { withOut-RFC2658Interleaving-And-TOC(0) , including-RFC2658Interleaving-And-TOC(1) , including-TOC-Only(2) , interleave-Bundling(3) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "When enabled, RTP packets include an interleaving byte for VBR coders. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLERFC2658INTERLEAVING" ::= {acRtp 3} acRtpRxTxMode OBJECT-TYPE SYNTAX INTEGER { rTPTxRx(0) , rTPTxOnly(1) , rTPRxOnly(2) , rTPUnactive(3) , rTPRxRFC2833Tx(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects which RTP directions are enabled. Both Tx and Rx sides can be disabled. 0 = RTPTxRx 1 = RTPTxOnly 2 = RTPRxOnly 3 = RTPUnactive 4 = RTPRxRFC2833Tx. Access: Online. AC INI-Param: RTPDIRECTIONCONTROL" ::= {acRtp 4} acRtpRFC2833TxPayloadType OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the RFC 2833 Tx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833TXPAYLOADTYPE" ::= {acRtp 5} acRtpRFC2833RxPayloadType OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the RFC 2833 Rx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833RXPAYLOADTYPE" ::= {acRtp 6} acRtpRedundancyPayloadType OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter sets the RFC 2198 (RTP Redundancy) packet's parameter 'RTP Payload Type'. Range: 96 to 127. Access: Online. AC INI-Param: RFC2198PAYLOADTYPE" ::= {acRtp 7} acRtpRedundancyDepth OBJECT-TYPE SYNTAX Unsigned32 (0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "Redundancy depth of RFC 2198 redundancy packets. 0 = Disabled In Gen 3 boards: range is 0-5 For other Gens 0-1. Access: Online. AC INI-Param: RTPREDUNDANCYDEPTH" ::= {acRtp 8} acRtpPacketizationFactor OBJECT-TYPE SYNTAX Unsigned32 (1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the number of DSP payloads for generating one RTP packet. Range = Hardware dependent. Access: Online. AC INI-Param: RTPPACKINGFACTOR" ::= {acRtp 9} acRtpNoOpPayloadType OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-write STATUS current DESCRIPTION "User can modify the Noop packets RTP Payload type by setting this parameter. Range = 96 to 127. Access: Online. AC INI-Param: RTPNOOPPAYLOADTYPE" ::= {acRtp 10} acRtpNoOpEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables / disable Noop packets sending mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: NoOpEnable" ::= {acRtp 11} acRtpNoOpInterval OBJECT-TYPE SYNTAX Unsigned32 (20..600000) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to modify the Noop packets sending interval Parameter value is in milliseconds Default value = 10 sec (10000 msec) Range = 20 to 600000 (20 msec to 10 min - 10 min = 600000). Access: Online. AC INI-Param: NoOpInterval" ::= {acRtp 12} acRtpVBRCoderHeaderFormat OBJECT-TYPE SYNTAX INTEGER { withOut-RFC2658Interleaving-And-TOC(0) , including-RFC2658Interleaving-And-TOC(1) , including-TOC-Only(2) , interleave-Bundling(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - payload only (no header, no toc, no m-factor) 1- support RFC 2658 format, 1 byte for interleaving header (always 0) and toc, no m-factor 2 – payload including toc only, allow m-factor 3- RFC 3358 format . Access: Online. AC INI-Param: VBRCoderHeaderFormat" ::= {acRtp 13} acRtpAMRCoderHeaderFormat OBJECT-TYPE SYNTAX INTEGER { cE-AMR-DEFAULT-FORMAT(0) , cE-AMR-RFC-3267-BUNDLING(1) , cE-AMR-RFC-3267-INTERLEAVING(2) , cE-AMR-IF2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame contains CRM byte and toc RFC_3267_BUNDLING=1 - single CRM byte followed by toc tables RFC_3267_INTERLEAVING=2 - supported as receivers only. Access: Online. AC INI-Param: AMRCODERHEADERFORMAT" ::= {acRtp 14} acRtpAMRFECRedundancyDepth OBJECT-TYPE SYNTAX INTEGER { cE-AMR-FEC-REDUNDANCY-LEVEL-NONE(0) , cE-AMR-FEC-REDUNDANCY-LEVEL-1(1) , cE-AMR-FEC-REDUNDANCY-LEVEL-2(2) , cE-AMR-FEC-REDUNDANCY-LEVEL-3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the AMR / WB-AMR Redundancy depth according to RFC 3267. 0 = No Redundancy 1 = Redundancy depth of a single packet 2 = Redundancy depth of 2 packets 3 = Redundancy depth of 3 packets . Access: Online. AC INI-Param: AMRFECREDUNDANCYDEPTH" ::= {acRtp 15} acRtpAMRFECNumOfMngtPolicyEntries OBJECT-TYPE SYNTAX Unsigned32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the number of entries to be defined at the AMR management policy table. Each entry defines the policy of a different rate. Access: Online. AC INI-Param: AMRFECNUMBEROFCODECMODES" ::= {acRtp 16} acRtpAMRFECDelayHysteresis OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the hysteresis of the Delay Threshold for AMR Hand-out events (in msec). Access: Online. AC INI-Param: AMRFECDELAYHYSTERESIS" ::= {acRtp 17} acRtpAMRFECDelayThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the one-way delay value (in msec) that may cause the AMR Hand Out report. 0 = 'Hand Out' report is disabled (default). Access: Online. AC INI-Param: AMRFECDELAYTHRESHHOLD" ::= {acRtp 18} acRtpQcelpCoderHeaderFormat OBJECT-TYPE SYNTAX INTEGER { parameter-Is-Not-Used(-1) , including-RFC2658Interleaving-And-TOC(1) , including-TOC-Only(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether to define a separate header format for the QCELP coder (different to the header format of EVRC coder). One of the following values: -1 - QCELP coder uses the same header format as EVRC coder, according to VBRCoderHeaderFormat parameter. 1 to 2 - QCELP coder uses the value defined by this parameter to define its header format. This parameter is relevant only for Control Protocol users. TPNCP and PCI users should always use -1 value. Access: Instant. AC INI-Param: QcelpCoderHeaderFormat" ::= {acRtp 19} acRtpAMROctetAlignedEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 = disable the AMR Octet Aligned mode. 1 = enable the AMR Octet Aligned mode. Access: Online. AC INI-Param: AmrOctetAlignedEnable" ::= {acRtp 20} acAMRFECCodecPolicies OBJECT IDENTIFIER ::= {acRtp 21} -- **************************************** -- acAMRFECCodecPolicies table declaration -- **************************************** acAMRFECCodecPoliciesTable OBJECT-TYPE SYNTAX SEQUENCE OF AcAMRFECCodecPoliciesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acAMRFECCodecPolicies 1} -- **************************************** -- acAMRFECCodecPolicies table entry -- **************************************** acAMRFECCodecPoliciesEntry OBJECT-TYPE SYNTAX AcAMRFECCodecPoliciesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acAMRFECCodecPoliciesIndex} ::= {acAMRFECCodecPoliciesTable 1} -- **************************************** -- acAMRFECCodecPolicies TABLE -- **************************************** AcAMRFECCodecPoliciesEntry ::= SEQUENCE { acAMRFECCodecPoliciesIndex Unsigned32, acAMRFECCodecPoliciesRowStatus RowStatus, acAMRFECCodecPoliciesRate Unsigned32, acAMRFECCodecPoliciesRedundancyLevel Unsigned32, acAMRFECCodecPoliciesThreshold Unsigned32, acAMRFECCodecPoliciesHysteresis Unsigned32 } acAMRFECCodecPoliciesIndex OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION " AC INI-Param: AMRFECCodecPolicies_Index" ::= {acAMRFECCodecPoliciesEntry 1} acAMRFECCodecPoliciesRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " AC INI-Param: N/A" ::= {acAMRFECCodecPoliciesEntry 2} acAMRFECCodecPoliciesRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AMR Rate x of policy x (values 0-8). Access: Online. AC INI-Param: AMRFECCodecPolicies_Rate" ::= {acAMRFECCodecPoliciesEntry 3} acAMRFECCodecPoliciesRedundancyLevel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Redundancy Level for policy x. Same values as ‘RFC 3267 Redundancy” field. Access: Online. AC INI-Param: AMRFECCodecPolicies_RedundancyLevel" ::= {acAMRFECCodecPoliciesEntry 4} acAMRFECCodecPoliciesThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "FLR (Frame Loss Ratio) threshold of policy 1. Values are taken from 3GPP TS 44.318 (0-63). Access: Online. AC INI-Param: AMRFECCodecPolicies_Threshold" ::= {acAMRFECCodecPoliciesEntry 5} acAMRFECCodecPoliciesHysteresis OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Hysteresis of FLR threshold for policy 1. Values are taken from 3GPP TS 44.318. (0-15). Access: Online. AC INI-Param: AMRFECCodecPolicies_Hysteresis" ::= {acAMRFECCodecPoliciesEntry 6} acRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 3} acRtcpDisableIntervalRandomization OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether RTCP report intervals are randomized or whether each report interval accords exactly to the parameter defining RTCP Mean Tx Interval (in milliseconds). 0 = Randomize 1 = Don’t Randomize. Access: Online. AC INI-Param: DISABLERTCPRANDOMIZE" ::= {acRtcp 1} acRtcpXr OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 4} acRtcpXrBurstThreshold OBJECT-TYPE SYNTAX Integer32 (-1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "voice quality monitoring - excessive burst alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONBURSTHR" ::= {acRtcpXr 1} acRtcpXrDelayThreshold OBJECT-TYPE SYNTAX Integer32 (-1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "voice quality monitoring - excessive delay alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONDELAYTHR" ::= {acRtcpXr 2} acRtcpXrEndOofCallRvalDelayThreshold OBJECT-TYPE SYNTAX Integer32 (-1..12) MAX-ACCESS read-write STATUS current DESCRIPTION "voice quality monitoring - end of call low quality alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONEOCRVALTHR" ::= {acRtcpXr 3} acRtcpXrGMin OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "voice quality monitoring - minimum gap size (number of frames). Access: Online. AC INI-Param: VQMONGMIN" ::= {acRtcpXr 4} acRtcpXrEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) , enableOnlyCalculation(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets voice quality monitoring (RTCP-XR) mode. 0 = Disable 1 = Enable all 2 = Enable Only Calculation. Access: Offline. AC INI-Param: VQMONENABLE" ::= {acRtcpXr 5} acVideoRtpRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 5} acVideoRtpRtcpDisableRtcpIntervalRandomization OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether to enable RTCP Interval Randomization. One of the following values: 0 Enable RTCP Interval Randomization 1 Disable RTCP Interval Randomization . Access: Online. AC INI-Param: VideoDisableRtcpIntervalRandomization" ::= {acVideoRtpRtcp 1} acVideoRtpRtcpMeanTxInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the mean interval between two transmitted RTCP packets (milliseconds). If the interval is set to 0, no RTCP packets are transmitted at all. Access: Online. AC INI-Param: VideoRtcpMeanTxInterval" ::= {acVideoRtpRtcp 2} acVideoRtpRtcpBrokenConnectionActivationMode OBJECT-TYPE SYNTAX INTEGER { afterFirstIncomingRtpPacket (0) , onRtpStreamActivation (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Broken connection event activation mode. 0 - Activate broken connection after the arrival of the first RTP packet. 1 - Activate broken connection immediately after the Activate RTP command. . Access: Online. AC INI-Param: VideoBrokenConnectionActivationMode" ::= {acVideoRtpRtcp 3} acVideoRtpRtcpBrokenConnectionEventTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout that defines when broken connection event occurs. Time resolution is 20msec. Access: Online. AC INI-Param: VideoBrokenConnectionEventTimeout" ::= {acVideoRtpRtcp 4} acMediaIBSConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 5} acIBS OBJECT IDENTIFIER ::= {acMediaIBSConfig 1} acIBSAnalogSignalTransportType OBJECT-TYPE SYNTAX INTEGER { ignore(0) , transfer(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the analog signal transport type. 0 = Ignore 1 = Transfer hookflash via RFC 2833. Access: Online. AC INI-Param: ANALOGSIGNALTRANSPORTTYPE" ::= {acIBS 1} acIBSDTMFVolume OBJECT-TYPE SYNTAX Integer32 (-31..0) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines and controls the DTMF generation volume [-dBm]. Range = -31 to 0. Access: Online. AC INI-Param: DTMFVOLUME" ::= {acIBS 2} acIBSDTMFTransportType OBJECT-TYPE SYNTAX INTEGER { acMuteDTMF(0) , acTransparentDTMF(2) , acRFC2833RelayDTMF(3) , acRFC2833RelayDecoderMute(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the type of DTMF transport. 0 = Erase DTMFs from voice transport not relayed to remote 2 = DTMFs not erased are not relayed to remote 3 = DTMFs are muted from the voice stream and relayed according to RFC 2833 7 = DTMFs are sent according to RFC 2833 and muted when received. Access: Online. AC INI-Param: DTMFTRANSPORTTYPE" ::= {acIBS 3} acIBSMFTransportType OBJECT-TYPE SYNTAX INTEGER { acMuteMF(0) , acTransparentMF(2) , acRFC2833RalayMF(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the type of MF transport. 0 = Erase MFs from voice transport not relayed to remote 2 = MFs not erased are not relayed to remote 3 = MFs are muted from the voice stream and relayed according to RFC 2833. Access: Online. AC INI-Param: MFTRANSPORTTYPE" ::= {acIBS 4} acIBSTrunkTestingTonesEnable OBJECT-TYPE SYNTAX INTEGER { disables (0) , enables (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables trunk testing tones. 0 = Disables trunk testing tones 1 = Enables trunk testing tones. Access: Offline. AC INI-Param: ENABLETRUNKTESTINGTONES" ::= {acIBS 5} acIBSCASRelayTransportMode OBJECT-TYPE SYNTAX INTEGER { cASEventsOnly(0) , cASRFC2833Relay(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the ABCD signaling transport type over IP. 0 = No Relay over the network 1 = Enable CAS relay according to RFC 2833. Access: Online. AC INI-Param: CASTRANSPORTTYPE" ::= {acIBS 6} acIBSRxDtmfHangOverTime OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the Voice Silence time (in ms units) after playing DTMF or MF digits to the TDM side that arrived as Relay from the Network side. Range from 0 to 2000, Default 1000. Access: Online. AC INI-Param: RxDtmfHangOverTime" ::= {acIBS 7} acIBSTxDtmfHangOverTime OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-write STATUS current DESCRIPTION "Voice Silence time (in ms units) after detecting the end of DTMF or MF digits at the TDM side when the DTMF Transport Type is either Relay or Mute.This feature allows the user to configure the silence time. . Access: Online. AC INI-Param: TxDtmfHangOverTime" ::= {acIBS 8} acIBSDTMFTwistControl OBJECT-TYPE SYNTAX Integer32 (-10..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines a delta (in dB) between the high and low frequency component in the DTMF signal. dB Positive values cause the higher frequency component to be stronger than the lower one. Negative values cause the opposite effect. For any parameter value, both components change so that their average is constant. Range = -10 to 10. Access: Offline. AC INI-Param: DTMFGenerationTwist" ::= {acIBS 9} acIBSNTEMaxDuration OBJECT-TYPE SYNTAX Integer32 (-1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximal time for sending NTEs (Named Telephony Events) to the network, regardless of the time range when the TDM signal is detected. -1= NTE will stop only upon detection of End event (default). Access: Online. AC INI-Param: NTEMaxDuration" ::= {acIBS 10} acIBSDetectors OBJECT IDENTIFIER ::= {acMediaIBSConfig 2} acIBSDetectorsMFR1Enable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of MFR1 signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR1DETECTORENABLE" ::= {acIBSDetectors 1} acIBSDetectorsMFR2ForwardEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of MFR2 forward signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR2FORWARDDETECTORENABLE" ::= {acIBSDetectors 2} acIBSDetectorsMFR2BackwardEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of MFR2 backward signaling. Access: Online. AC INI-Param: MFR2BACKWARDDETECTORENABLE" ::= {acIBSDetectors 3} acIBSDetectorsR1LineEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R1LINEDETECTORENABLE" ::= {acIBSDetectors 4} acIBSDetectorsR2LineEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R2LINEDETECTORENABLE" ::= {acIBSDetectors 5} acIBSDetectorsAC15Enable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of Line signaling. Access: Online. AC INI-Param: AC15DETECTORENABLE" ::= {acIBSDetectors 6} acIBSDetectorsDTMFEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of DTMF signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: DTMFDETECTORENABLE" ::= {acIBSDetectors 7} acIBSDetectorsCallProgressEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of Call Progress Tones. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: CALLPROGRESSDETECTORENABLE" ::= {acIBSDetectors 8} acIBSDetectorsUserDefinedToneEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of User Defined Tones signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: USERDEFINEDTONEDETECTORENABLE" ::= {acIBSDetectors 9} acIBSDetectorsDetectionRedirection OBJECT-TYPE SYNTAX INTEGER { pcm(0) , network(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the IBS (In-Band Signaling) Detection Direction. 0 = PCM 1 = Network. Access: Online. AC INI-Param: IBSDETECTIONREDIRECTION" ::= {acIBSDetectors 10} acIBSDetectorsSS4Enable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS4DETECTORENABLE" ::= {acIBSDetectors 11} acIBSDetectorsMFSS5Enable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables detection of MF SS5 line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFSS5DETECTORENABLE" ::= {acIBSDetectors 12} acIBSDetectorsSS5Enable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS5DETECTORENABLE" ::= {acIBSDetectors 13} acIBSDetectorsSITEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables SIT (Special Information Tone) detection according to the ITU-T recommendation E.180/Q.35. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: SITDETECTORENABLE" ::= {acIBSDetectors 14} acIBSDetectorsCOTEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables Continuity Test tone detection and generation according to the ITU-T Q.724 recommendation. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLECONTINUITYTONES" ::= {acIBSDetectors 15} acIBSDetectorsR1DetectionStandard OBJECT-TYPE SYNTAX INTEGER { mfR1DetectionStandardItu (0) , mfR1DetectionStandardR15 (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter determines which one of the R1 MF protocol flavors will be used for detection. 0 = ITU 1 = R1.5. Access: Offline. AC INI-Param: R1DetectionStandard" ::= {acIBSDetectors 16} acIBSDetectorsUDTDetectorFrequencyDeviation OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the deviation allowed for the detection of each signal frequency. Units are in Hertz. Valid values range 1-50. Default value 50 Hz. . Access: Offline. AC INI-Param: UDTDETECTORFREQUENCYDEVIATION" ::= {acIBSDetectors 17} acIBSDetectorsCPTDetectorFrequencyDeviation OBJECT-TYPE SYNTAX Unsigned32 (1..30) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the deviation allowed for the detection of each CPT signal frequency. Units are in Hertz. Valid values range 1-30. Default value 10 Hz. . Access: Offline. AC INI-Param: CPTDETECTORFREQUENCYDEVIATION" ::= {acIBSDetectors 18} acIPMediaConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 6} acIPMedia OBJECT IDENTIFIER ::= {acIPMediaConfig 1} acIPMediaDSPDetectorsEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables DSP IP Media Detectors. Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLEDSPIPMDETECTORS" ::= {acIPMedia 1} acIPMediaEnableMCApplication OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables media control functionality. Access: Offline. AC INI-Param: ENABLEMEDIACONTROL" ::= {acIPMedia 2} acIPMAnswerDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 2} acIPMAnswerDetectorEnable OBJECT-TYPE SYNTAX INTEGER { no(0) , yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables activation of the AD (Answer Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEANSWERDETECTOR" ::= {acIPMAnswerDetector 1} acIPMAnswerDetectorActivityDelay OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls (in 100 msec resolution) the time between sending Activation command (AnswerDetector = 1) and the time that the detector actually starts to work. Range = 0 to 0x3FF. Access: Online. AC INI-Param: ANSWERDETECTORACTIVITYDELAY" ::= {acIPMAnswerDetector 2} acIPMAnswerDetectorSilenceTime OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls the silence time period (in 100 msec resolution) from no speech input until the END_OF_SPEECH event is sent. 10 = 1 second Range = 0 to 0x3FF. Access: Online. AC INI-Param: ANSWERDETECTORSILENCETIME" ::= {acIPMAnswerDetector 3} acIPMAnswerDetectorRedirection OBJECT-TYPE SYNTAX INTEGER { speechPCMSideDetected(0) , speechIPSideDetected(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AD (Answer Detector) Redirection. 0 (PCM) = Speech from the PCM side is detected 1 (Network) = Speech from the IP side is detected. Access: Online. AC INI-Param: ANSWERDETECTORREDIRECTION" ::= {acIPMAnswerDetector 4} acIPMAnswerDetectorSensitivity OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the AD (Answer Detector) sensitivity. The allowed values are different for different boards: DSP Gen2-based products: range 0 - 2, default 0. DSP Gen2-based products: range 0 - 7, default 3. Lowest value matches highest sensitivity and vice versa. Access: Online. AC INI-Param: ANSWERDETECTORSENSITIVITY" ::= {acIPMAnswerDetector 5} acIPMEnergyDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 3} acIPMEnergyDetectorEnable OBJECT-TYPE SYNTAX INTEGER { no(0) , yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Activates the ED (Energy Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEENERGYDETECTOR" ::= {acIPMEnergyDetector 1} acIPMEnergyDetectorQualityFactor OBJECT-TYPE SYNTAX Unsigned32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the ED's (Energy Detector's) sensitivity (0 -10). 0 = Insensitive 10 = Most Sensitive Range = 0 to 10. Access: Online. AC INI-Param: ENERGYDETECTORQUALITYFACTOR" ::= {acIPMEnergyDetector 2} acIPMEnergyDetectorThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the ED's (Energy Detector's) threshold. A signal exceeding the threshold invokes an 'Above' or 'Below' event. ActualThreshold = -44 dBm + (EDThreshold * 6) Default = 3 = -26 dBm Range: 0 to 7. Access: Online. AC INI-Param: ENERGYDETECTORTHRESHOLD" ::= {acIPMEnergyDetector 3} acIPMEnergyDetectorEnergyRedirection OBJECT-TYPE SYNTAX INTEGER { tDM(0) , network(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the direction of the energy detection. 0 = Detect from the TDM side 1 = Detect from the network side. Access: Online. AC INI-Param: ENERGYDETECTORREDIRECTION" ::= {acIPMEnergyDetector 4} acIPMediaPatternDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 4} acIPMediaPatternDetectorEnable OBJECT-TYPE SYNTAX INTEGER { no(0) , yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables activation of the PD (Pattern Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEPATTERNDETECTOR" ::= {acIPMediaPatternDetector 1} acIPMediaPatternDetectorDetectionThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the number of consecutive patterns to trigger the pattern detection event. Range = 0 to 31. Access: Offline. AC INI-Param: PDTHRESHOLD" ::= {acIPMediaPatternDetector 2} acIPMediaAMD OBJECT IDENTIFIER ::= {acIPMediaConfig 5} acIPMediaAMDDetectionDirection OBJECT-TYPE SYNTAX INTEGER { acAmdTdmDetection(0) , acAmdNetworkDetection(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AMD (Answer Machine Detector) detection direction. One of the following values: 0 = Detection from the TDM side 1 = Detection from the Network side. Access: Online. AC INI-Param: AMDDETECTIONDIRECTION" ::= {acIPMediaAMD 1} acIPMediaAMDSensitivity OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AMD (Answer Machine Detector) detection sensitivity: 0 = Best detection of an answering machine 7 = Best detection of a live call. Access: Online. AC INI-Param: AMDDetectionSensitivity" ::= {acIPMediaAMD 2} acIPMediaAMDDetectionSensitivityHighResolution OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AMD (Answer Machine Detector) high resolution detection sensitivity. The high resolution has 16 levels of sensitivity while the normal resolution (Answer Machine Detector Sensitivity) has 8 levels. 0 = Best detection of an answering machine 15 = Best detection of a live call. Access: Online. AC INI-Param: AMDSensitivityLevel" ::= {acIPMediaAMD 3} acIPMediaAMDSensitivityResolution OBJECT-TYPE SYNTAX INTEGER { normal(0) , high(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AMD (Answer Machine Detector) detection sensitivity resolution: 0 = Normal detection sensitivity resolution (8 sensitivity levels) 1 = High detection sensitivity resolution (16 sensitivity levels). Access: Online. AC INI-Param: AMDSensitivityParameterSuit" ::= {acIPMediaAMD 4} acIPMediaAMDBeepDetectionTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..1638) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AMD (Answer Machine Detector) Beep detection timeout. Units of 100 milliseconds, values from 0 to 1638 (163.8 seconds). Access: Online. AC INI-Param: AMDBeepDetectionTimeout" ::= {acIPMediaAMD 5} acIPMediaAMDBeepDetectionSensitivity OBJECT-TYPE SYNTAX Unsigned32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AMD (Answer Machine Detector) Beep detection sensitivity. 0 - Least sensitive. 3 - Most sensitive. Access: Online. AC INI-Param: AMDBeepDetectionSensitivity" ::= {acIPMediaAMD 6} acIPMediaAMDSensitivityParameterSuit OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the serial number of the AMD (Answer Machine Detector) parameter suit: 0 = USA Parameter Suit with normal detection sensitivity resolution (8 sensitivity levels) 1 = USA Parameter Suit with high detection sensitivity resolution (16 sensitivity levels) 2-7 : other countries parameter suits with up to 16 sensitivity levels. Access: Online. AC INI-Param: AMDSensitivityParameterSuit" ::= {acIPMediaAMD 7} acIPMediaAMDSensitivityLevel OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the AMD (Answer Machine Detector) level of detection sensitivity. It has 16 levels of sensitivity : 0 = Best detection of an answering machine 15 = Best detection of a live call. Access: Online. AC INI-Param: AMDSensitivityLevel" ::= {acIPMediaAMD 8} acIPMConference OBJECT IDENTIFIER ::= {acIPMediaConfig 6} acIPMConferenceGASNMinInterval OBJECT-TYPE SYNTAX Unsigned32 (10..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum interval between Active Speaker Notification (ASN) events. An ASN event reports on the active speakers in a conference. The event is issued whenever the active speakers change. units = 100 ms Minimum configurable interval between events is 500 ms (5 units). Access: Instant. AC INI-Param: ACTIVESPEAKERSNOTIFICATIONMININTERVAL" ::= {acIPMConference 1} acIPMConferenceEnergythreshold OBJECT-TYPE SYNTAX Unsigned32 (0..39) MAX-ACCESS read-write STATUS current DESCRIPTION "Conference - Minimum energy level for a user to be included in Active Speaker Notification (ASN) events (units: -dBm). Valid range 0 to (-39) dbm. Access: Instant. AC INI-Param: ActiveSpeakerEnergyThreshold" ::= {acIPMConference 2} acIPMConferenceEnableHDConference OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable\Disable HD Conference. Access: Offline. AC INI-Param: EnableHDConference" ::= {acIPMConference 3} acIPMVideoConference OBJECT IDENTIFIER ::= {acIPMediaConfig 7} acIPMVideoConferenceSwitchingInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the video view rotation interval in seconds. Applicable when using timer trigger switching mode. Access: Online. AC INI-Param: VideoConferenceSwitchingInterval" ::= {acIPMVideoConference 1} acIPMVideoConferenceEnableActiveSpeakerHighlight OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Highlights the speaker for participants viewing a symmetric layout (2x2 or 3x3) . 0 - Don't highlight active speaker. 1 - Highlight active speaker. Access: Online. AC INI-Param: VideoEnableActiveSpeakerHighlight" ::= {acIPMVideoConference 2} acIPMVideoConferenceParticipantType OBJECT-TYPE SYNTAX INTEGER { regular(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates a participant's capabilities in the conference. Regular (2) – Regular participant who is able to both send and receive video. . Access: Online. AC INI-Param: VideoConferenceParticipantType" ::= {acIPMVideoConference 3} acIPMVideoConferenceParticipantTriggerMode OBJECT-TYPE SYNTAX INTEGER { triggerMode-Speaker(0) , triggerMode-Timer(1) , triggerMode-Fixed(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Participant trigger mode defines the trigger for modifying the participant's view. Voice Activated Video Switch (0) – A participant’s view will be changed according to the active speakers’ detection. Timer (1) – A participant’s view is rotated every configured time among the different video participants in the conference. Fixed (3) – A participant’s view is fixed. . Access: Online. AC INI-Param: VideoConferenceParticipantTriggerMode" ::= {acIPMVideoConference 4} acIPMVideoConferenceParticipantLayout OBJECT-TYPE SYNTAX INTEGER { layout-1XUSER(0) , layout-2x2-USERS(1) , layout-3x3-USERS(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the participant's view layout. 1 user (0). 2*2 users (1). All same size. 3*3 users (2). All same size. . Access: Online. AC INI-Param: VideoConferenceParticipantLayout" ::= {acIPMVideoConference 5} acIPMVideoConferenceEnableConferenceParticipantSelfView OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Self view indication. 0 - The participant cannot view himself 1 - The participant can view himself. Access: Online. AC INI-Param: VideoEnableConferenceParticipantSelfView" ::= {acIPMVideoConference 6} acMediaCallerIDConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 7} acCallerID OBJECT IDENTIFIER ::= {acMediaCallerIDConfig 1} acCallerIDTypes OBJECT-TYPE SYNTAX INTEGER { bellcore (0) , eTSI (1) , nTT (2) , bT (4) , dTMF-Based-ETSI (16) , denmark (17) , indian (18) , brazilian (19) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the supported Caller ID standard. 0 = Bellcore 1 = ETSI 2 = NTT 4 = British 16 = ETSI_ETS 17 = Denmark 18 = Indian 19 = Brazilian. Access: Online. AC INI-Param: CALLERIDTYPE" ::= {acCallerID 1} acCallerIDTransportType OBJECT-TYPE SYNTAX INTEGER { callerID-DISABLE(0) , callerID-RELAY(1) , callerID-MUTE(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the CallerID Transport type. 0 = Disable 1 = Relay 3 = Mute. Access: Online. AC INI-Param: CallerIDTransportType" ::= {acCallerID 2} acCallerIDDTMFBasedMaxDigits OBJECT-TYPE SYNTAX Unsigned32 (0..26) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the maximum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MAXDTMFDIGITSINCIDSTRING" ::= {acCallerID 3} acCallerIDDTMFBasedMinDigits OBJECT-TYPE SYNTAX Unsigned32 (0..26) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the mimumum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MINDTMFDIGITSINCIDSTRING" ::= {acCallerID 4} acCallerIDNTTDIDSignallingForm OBJECT-TYPE SYNTAX INTEGER { nttDidFskSignalling (0) , nttDidDtmfBasedSignalling (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the signalling format used when generating an NTT DID. 0 = FSK Siganl 1 = DTMF Based Signal. Access: Online. AC INI-Param: NTTDIDSignallingForm" ::= {acCallerID 5} acMediaNetworkConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 8} acMediaNetwork OBJECT IDENTIFIER ::= {acMediaNetworkConfig 1} acMediaNetworkDisableNAT OBJECT-TYPE SYNTAX INTEGER { no(0) , yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the NAT feature. 0 = Do not disable NAT 1 = Disable NAT. Access: Online. AC INI-Param: DISABLENAT" ::= {acMediaNetwork 1} acMediaNetworkRtpIpTos OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Sets value of IP Type Of Service field in IP header for all packets generated from this channel. Follow the acTIPTOS enumeration. Access: Instant. AC INI-Param: IPTOS" ::= {acMediaNetwork 2} acMediaNetworkRtpIpPrecedence OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Sets value of the IP precedence field in the IP header for all packets generated from this channel. Follow the acTIPPrecedence enumeration. Access: Instant. AC INI-Param: IPPRECEDENCE" ::= {acMediaNetwork 3} acMediaNetworkIPDiffServ OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Defines the value of the 'DiffServ' field in the IP header for media (RTP) traffic. Range: 0 to 63. Access: Instant. AC INI-Param: IPDIFFSERV" ::= {acMediaNetwork 4} acMediaNetworkInboundLatchMode OBJECT-TYPE SYNTAX INTEGER { strict(0) , dynamic(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the way of handling incoming media packets from non-expected address/port. Access: Online. AC INI-Param: InboundMediaLatchMode" ::= {acMediaNetwork 5} acMediaJBConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 9} acJitterBuffer OBJECT IDENTIFIER ::= {acMediaJBConfig 1} acJitterBufferMinDelay OBJECT-TYPE SYNTAX Unsigned32 (0..150) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Dynamic Jitter Buffer Minimum Delay (in msec). Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFMINDELAY" ::= {acJitterBuffer 1} acJitterBufferOptFactor OBJECT-TYPE SYNTAX Unsigned32 (0..13) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Dynamic Jitter Buffer frame error/delay optimization. Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFOPTFACTOR" ::= {acJitterBuffer 2} acVideoJitterBuffer OBJECT IDENTIFIER ::= {acMediaJBConfig 2} acVideoJitterBufferMinDelay OBJECT-TYPE SYNTAX Unsigned32 (0..500) MAX-ACCESS read-write STATUS current DESCRIPTION "Jitter buffer minimum delay in milliseconds. Must be less than JitterBufferMaxDelay. Access: Online. AC INI-Param: VideoJitterBufferMinDelay" ::= {acVideoJitterBuffer 1} acVideoJitterBufferMaxDelay OBJECT-TYPE SYNTAX Unsigned32 (0..500) MAX-ACCESS read-write STATUS current DESCRIPTION "Jitter buffer maximum delay in milliseconds. Access: Online. AC INI-Param: VideoJitterBufferMaxDelay" ::= {acVideoJitterBuffer 2} acVideoJitterBufferDJBOptimizationFactor OBJECT-TYPE SYNTAX Unsigned32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "JB Optimization Factor controls the jitter buffer's adaptation rates A High factor means fast adaptation when jitter increases, and a slow adaptation when jitter decrease. Small factor means slow adaptation when jitter increases, and a fast adaptation when jitter decreases. . Access: Online. AC INI-Param: VideoDJBOptimizationFactor" ::= {acVideoJitterBuffer 3} acMediaStatus OBJECT IDENTIFIER ::= {acMedia 2} acMediaAggregation OBJECT IDENTIFIER ::= {acMediaConfiguration 10} acMediaAggregationRemoteBaseUDPPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote Base UDP Port For Aggrigation. Access: Offline. AC INI-Param: REMOTEBASEUDPPORT" ::= {acMediaAggregation 1} acMediaAggregationL1L1ComplexRxUDPPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port for the incoming (from the remote side) and the outgoing (destination UDP) packets, for Complex Multiplexed RTP mode. Access: Offline. AC INI-Param: L1L1ComplexRxUDPPort" ::= {acMediaAggregation 2} acMediaAggregationL1L1ComplexTxUDPPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The Source UDP port for the outgoing UDP Multiplexed RTP packets, for Complex-Multiplex RTP mode. Access: Offline. AC INI-Param: L1L1ComplexTxUDPPort" ::= {acMediaAggregation 3} acIPLegs OBJECT IDENTIFIER ::= {acMediaStatus 1} -- **************************************** -- acIPLegs table declaration -- **************************************** acIPLegsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcIPLegsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acIPLegs 1} -- **************************************** -- acIPLegs table entry -- **************************************** acIPLegsEntry OBJECT-TYPE SYNTAX AcIPLegsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acIPLegsLegIndex} ::= {acIPLegsTable 1} -- **************************************** -- acIPLegs TABLE -- **************************************** AcIPLegsEntry ::= SEQUENCE { acIPLegsLegIndex Unsigned32, acIPLegsCallIndex Unsigned32, acIPLegsRTPActive INTEGER, acIPLegsCoderType INTEGER, acIPLegsSilenceCompression INTEGER, acIPLegsDTMFDetection INTEGER, acIPLegsLocalRTPPort Unsigned32, acIPLegsRemoteRTPAddress IpAddress, acIPLegsFaxTransportType INTEGER, acIPLegsRxPackets Unsigned32, acIPLegsTxPackets Unsigned32, acIPLegsRxBytes Unsigned32, acIPLegsTxBytes Unsigned32, acIPLegsJitter Unsigned32, acIPLegsPacketLoss Unsigned32, acIPLegsSSRCOfSender Unsigned32, acIPLegsDSPDevice Unsigned32, acIPLegsLegName SnmpAdminString } acIPLegsLegIndex OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes Rtp Endpoint In A Specific Call. AC INI-Param: N/A" ::= {acIPLegsEntry 1} acIPLegsCallIndex OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Decribes The Call which The Rtp EndPoint Participant In It. AC INI-Param: N/A" ::= {acIPLegsEntry 2} acIPLegsRTPActive OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Decribes whether the RTP is active or not. AC INI-Param: N/A" ::= {acIPLegsEntry 3} acIPLegsCoderType OBJECT-TYPE SYNTAX INTEGER { acG711Alaw-64(0) , acG711Mulaw(1) , acG726-16(2) , acG726-24(3) , acG726-32 (4) , acG726-40(5) , acG727-16(6) , acG727-24-16(7) , acG727-24(8) , acG727-32-16(9) , acG727-32-24(10) , acG727-32(11) , acG727-40-16(12) , acG727-40-24(13) , acG727-40-32(14) , acG723Low(15) , acG723High(16) , acG729(17) , acGSM610(18) , vacGSM610MS(20) , acGSM-EFR(21) , acTransparent(22) , acG728(23) , acNetCoder-4-8(25) , acNetCoder-5-6(26) , acNetCoder-6-4(27) , acNetCoder-7-2(28) , acNetCoder-8(29) , acNetCoder-8-8(30) , acNetCoder-9-(31) , acEVRC(32) , acEVRC-TFO(33) , acQCELP-8(34) , acQCELP-8-TFO(35) , acQCELP-13(36) , acQCELP-13-TFO(37) , acEVRC-TTY(38) , acNoCoder(40) , acModemAnswer(41) , acModemCall(42) , acVoxADPCM(43) , acG711Alaw-5-5(45) , acG711Mulaw-5-5(46) , acG726-32-5-5(47) , acG729E(48) , acLinearPCM(49) , acAMR-4-7(50) , acAMR-5-15(51) , acAMR-5-9(52) , acAMR-6-7(53) , acAMR-7-4(54) , acAMR-7-95(55) , acAMR-10-2(56) , acAMR-12-2(57) , acEVRC-B(58) , acEVRC-TFOV(60) , acQCELP-8-TFOV(61) , acQCELP-13-TFOV(62) , acILBC-15(63) , acILBC-13(64) , acBV-16(65) , acAMRWB-6-6(66) , acAMRWB-8-85(67) , acAMRWB-12-65(68) , acAMRWB-14-25(69) , acAMRWB-15-85(70) , acAMRWB-18-25(71) , acAMRWB-19-85(72) , acAMRWB-23-05(73) , acAMRWB-23-85(74) , acG722-48K(75) , acG722-56K(76) , acG722-64K(77) , acDPNSSCoder(78) , acEG711Alaw-10ms(80) , acEG711Alaw-20ms(81) , acEG711Alaw-30ms(82) , acEG711Mulaw-10ms(83) , acEG711Mulaw-20ms(84) , acEG711Mulaw-30ms(85) } MAX-ACCESS read-only STATUS current DESCRIPTION "describes the coder Type. AC INI-Param: N/A" ::= {acIPLegsEntry 4} acIPLegsSilenceCompression OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enables or Disables the Silence Compression. AC INI-Param: N/A" ::= {acIPLegsEntry 5} acIPLegsDTMFDetection OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enables or Disables the DTMF Detection. AC INI-Param: N/A" ::= {acIPLegsEntry 6} acIPLegsLocalRTPPort OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the RTP port of the Leg. AC INI-Param: N/A" ::= {acIPLegsEntry 7} acIPLegsRemoteRTPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the RTP address. AC INI-Param: N/A" ::= {acIPLegsEntry 8} acIPLegsFaxTransportType OBJECT-TYPE SYNTAX INTEGER { transparent(0) , relay(1) , bypass(2) , withevents(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Fax transfor Type currently working. AC INI-Param: N/A" ::= {acIPLegsEntry 9} acIPLegsRxPackets OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the received packets on the Leg. AC INI-Param: N/A" ::= {acIPLegsEntry 10} acIPLegsTxPackets OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Transmitted packets on the Leg. AC INI-Param: N/A" ::= {acIPLegsEntry 11} acIPLegsRxBytes OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the received Bytes on the Leg. AC INI-Param: N/A" ::= {acIPLegsEntry 12} acIPLegsTxBytes OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Transmitted packets on the Leg. AC INI-Param: N/A" ::= {acIPLegsEntry 13} acIPLegsJitter OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Jitter on the Leg. AC INI-Param: N/A" ::= {acIPLegsEntry 14} acIPLegsPacketLoss OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Lost packets on the Leg. AC INI-Param: N/A" ::= {acIPLegsEntry 15} acIPLegsSSRCOfSender OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the SSRC Of the Sender. AC INI-Param: N/A" ::= {acIPLegsEntry 16} acIPLegsDSPDevice OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the DSP Device Of the Leg. AC INI-Param: N/A" ::= {acIPLegsEntry 17} acIPLegsLegName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A" ::= {acIPLegsEntry 18} acStreamingCache OBJECT IDENTIFIER ::= {acMediaConfiguration 11} acStreamingCacheSize OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the streaming cache size in MBs. The remaining size (out of 32MBs) is used as VoicePrompt storage. Access: Offline. AC INI-Param: gStreamingCacheSize" ::= {acStreamingCache 1} acStreamingCacheRefreshTime OBJECT-TYPE SYNTAX Integer32 (-1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the streaming cache data refresh time in minutes. If -1 is set, refresh is off. Access: Offline. AC INI-Param: gStreamingCacheRefreshTime" ::= {acStreamingCache 2} acStreamingCacheClearService OBJECT-TYPE SYNTAX Unsigned32 (1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "reset the streaming cache. Access: Instant. AC INI-Param: N/A" ::= {acStreamingCache 3} acMediaVideoConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 12} acMediaVideoConfigEncoderIntraInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the frequency for the number of frames at which the encoder outputs an Intra frame. Access: Online. AC INI-Param: VideoEncoderIntraInterval" ::= {acMediaVideoConfig 1} acMediaVideoConfigMaxPacketSize OBJECT-TYPE SYNTAX Unsigned32 (1..1400) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the maximum packet size in bytes. Access: Online. AC INI-Param: VideoMaxPacketSize" ::= {acMediaVideoConfig 2} acMediaVideoConfigTargetBitrate OBJECT-TYPE SYNTAX Unsigned32 (1..384) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the target output bit rate. Access: Online. AC INI-Param: VideoTargetBitrate" ::= {acMediaVideoConfig 3} acMediaVideoConfigQualityParameterForRateControl OBJECT-TYPE SYNTAX Unsigned32 (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "This value determines the trade off between video quality and frame rate. A low value indicates a higher quality with a lower frame rate and vice versa. Access: Online. AC INI-Param: VideoQualityParameterForRateControl" ::= {acMediaVideoConfig 4} acMediaVideoConfigRateControlType OBJECT-TYPE SYNTAX INTEGER { ceVideoConstantBitRate (0) , ceVideoVaribleBitRate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets bitrate output to either a constant or a variable bit rate. CBR (0) – Constant Bit Rate. VBR (1) – Variable Bit Rate. Target Bitrate indicates the target average output bit rate. . Access: Online. AC INI-Param: VideoRateControlType" ::= {acMediaVideoConfig 5} acMediaVideoConfigEnableReSyncHeader OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether to add a video packet header to every packet in order to increase error resilience. 0 - Disable 1 - Enable. Access: Online. AC INI-Param: VideoEnableReSyncHeader" ::= {acMediaVideoConfig 6} acMediaVideoConfigEnableAudioVideoSynchronization OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether to enable audio and video synchronization. 0 - No synchronization between audio and video streams 1 - Synchronization between audio and video streams . Access: Online. AC INI-Param: EnableAudioVideoSynchronization" ::= {acMediaVideoConfig 7} acIPMediaChannels OBJECT IDENTIFIER ::= {acMediaConfiguration 13} acIPMediaChannelsEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to enable DSP channels reservation for IPmedia support. Relevant for Mediant 1000 board only. One of the following possible 0 = Disable 1 - Enable. Access: Offline. AC INI-Param: EnableIPMediaChannels" ::= {acIPMediaChannels 1} -- **************************************** -- acIPMediaChannelsResources table declaration -- **************************************** acIPMediaChannelsResourcesTable OBJECT-TYPE SYNTAX SEQUENCE OF AcIPMediaChannelsResourcesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPMedia channels info" ::= {acIPMediaChannels 21} -- **************************************** -- acIPMediaChannelsResources table entry -- **************************************** acIPMediaChannelsResourcesEntry OBJECT-TYPE SYNTAX AcIPMediaChannelsResourcesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acIPMediaChannelsResourcesIndex} ::= {acIPMediaChannelsResourcesTable 1} -- **************************************** -- acIPMediaChannelsResources TABLE -- **************************************** AcIPMediaChannelsResourcesEntry ::= SEQUENCE { acIPMediaChannelsResourcesIndex Unsigned32, acIPMediaChannelsResourcesRowStatus RowStatus, acIPMediaChannelsResourcesAction INTEGER, acIPMediaChannelsResourcesActionRes INTEGER, acIPMediaChannelsResourcesModuleID Unsigned32, acIPMediaChannelsResourcesDSPChannelsReserved Unsigned32 } acIPMediaChannelsResourcesIndex OBJECT-TYPE SYNTAX Unsigned32 (0..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index Field for line. Internal parameter. AC INI-Param: IPMediaChannels_Index" ::= {acIPMediaChannelsResourcesEntry 1} acIPMediaChannelsResourcesRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A" ::= {acIPMediaChannelsResourcesEntry 2} acIPMediaChannelsResourcesAction OBJECT-TYPE SYNTAX INTEGER { none(0) } MAX-ACCESS read-create STATUS current DESCRIPTION "Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A" ::= {acIPMediaChannelsResourcesEntry 3} acIPMediaChannelsResourcesActionRes OBJECT-TYPE SYNTAX INTEGER { succeeded(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A" ::= {acIPMediaChannelsResourcesEntry 4} acIPMediaChannelsResourcesModuleID OBJECT-TYPE SYNTAX Unsigned32 (0..6) MAX-ACCESS read-create STATUS current DESCRIPTION "Refers to M1K board only, module at which slot. Access: Offline. AC INI-Param: IPMediaChannels_ModuleID" ::= {acIPMediaChannelsResourcesEntry 5} acIPMediaChannelsResourcesDSPChannelsReserved OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "How many DSP channels reserve for IPMedia channels. Access: Offline. AC INI-Param: IPMediaChannels_DSPChannelsReserved" ::= {acIPMediaChannelsResourcesEntry 6} acAcousticEchoSuppressor OBJECT IDENTIFIER ::= {acMediaConfiguration 14} acAcousticEchoSuppressorEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable support of network echo suppressor on board level. Reduces board resource capacity. Access: Offline. AC INI-Param: ACOUSTICECHOSUPPRESSORSUPPORT" ::= {acAcousticEchoSuppressor 1} acAcousticEchoSuppressorEchoCancellerType OBJECT-TYPE SYNTAX INTEGER { lineEchoCanceller(0) , acousticEchoSuppressorNetwork(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo Canceller type. Line echo canceller for TDM Side or acoustic echo suppressor on network side. Access: Online. AC INI-Param: ECHOCANCELLERTYPE" ::= {acAcousticEchoSuppressor 2} acAcousticEchoSuppressorAttenuationIntensity OBJECT-TYPE SYNTAX Unsigned32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Acoustic echo suppressor attenuation intensity. intensity of attenuation on signals identified as echo. Access: Online. AC INI-Param: ACOUSTICECHOSUPPATTENUATIONINTENSITY" ::= {acAcousticEchoSuppressor 3} acAcousticEchoSuppressorMaxERLThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Acoustic echo suppressor max ERL threshold in DB. Max ratio between signal level and retruned echo from phone. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMAXERLTHRESHOLD" ::= {acAcousticEchoSuppressor 4} acAcousticEchoSuppressorMinReferenceDelay OBJECT-TYPE SYNTAX Unsigned32 (0..40) MAX-ACCESS read-write STATUS current DESCRIPTION "Acoustic echo suppressor MIN reference delay in mSec. The reference delay in the network helps echo suppression algorithm to identify echo signals. The entered value will be multiplied by 10. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMINREFDELAYx10MS" ::= {acAcousticEchoSuppressor 5} acAcousticEchoSuppressorMaxReferenceDelay OBJECT-TYPE SYNTAX Unsigned32 (0..40) MAX-ACCESS read-write STATUS current DESCRIPTION "Acoustic echo suppressor MAX reference delay. The reference delay in the network helps echo suppression algorithm to identify echo signals. The entered value will be multiplied by 10. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMAXREFDELAYx10MS" ::= {acAcousticEchoSuppressor 6} END