AC-PM-Control-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TAddress, DisplayString, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC IpAddress FROM RFC1155-SMI Unsigned32, Integer32, enterprises FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB audioCodes, acRegistrations, acGeneric, acProducts,acBoardMibs,acPerformance FROM AUDIOCODES-TYPES-MIB; acPMControl MODULE-IDENTITY LAST-UPDATED "201311101856Z" --Sunday, November 10 2013 ORGANIZATION "AudioCodes Ltd" CONTACT-INFO "Postal: Support AudioCodes LTD 1 Hayarden Street Airport City Lod, ISRAEL 70151 Tel: 972-3-9764000 Fax: 972-3-9764040 Email: support@audiocodes.com Web: www.audiocodes.com" DESCRIPTION "The AC-PM-Control MIB offers performance monitoring For the Control related elements in Audiocodes' devices. The Configuration sub-tree is for configuring the interval Period length for the entire AC-PM-Control MIB, and the different tables' thresholds. The Data sub-tree presents the tables of monitored elements. Note - for the entire MIB the value (-1) means the value Asked for is either not supported or currently not relevant (this is for when values asked for are for intervals not yet recorded." ::= {acPerformance 8} acPMControlConfiguration OBJECT IDENTIFIER ::= {acPMControl 1} acPMControlConfigurationPeriodLength OBJECT-TYPE SYNTAX Unsigned32 (0..894780) MAX-ACCESS read-write STATUS current DESCRIPTION "Length of monitoring intervals for entire MIB. Time is in minutes. Access: Instant." ::= {acPMControlConfiguration 1} acPMControlConfigurationResetTotalCounters OBJECT-TYPE SYNTAX INTEGER { resetCountersDone(1) , resetTotalCounters(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Total-Counters Reset. To reset the total counters, set the value of this object to resetTotalCounters(2). Access: Instant." ::= {acPMControlConfiguration 2} acPMCPConnectionAttributes OBJECT IDENTIFIER ::= {acPMControlConfiguration 32} acPMCPConnectionAttributesLifetimeHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMCPConnectionAttributes 1} acPMCPConnectionAttributesLifetimeLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMCPConnectionAttributes 2} acPMCPConnectionAttributesStateHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMCPConnectionAttributes 3} acPMCPConnectionAttributesStateLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMCPConnectionAttributes 4} acPMCPConnectionAttributesCommandCounterHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMCPConnectionAttributes 5} acPMCPConnectionAttributesCommandCounterLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMCPConnectionAttributes 6} acPMCPConnectionAttributesRetransmissionCountHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMCPConnectionAttributes 7} acPMCPConnectionAttributesRetransmissionCountLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMCPConnectionAttributes 8} acPMCPConnectionAttributesActiveContextCountHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMCPConnectionAttributes 9} acPMCPConnectionAttributesActiveContextCountLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMCPConnectionAttributes 10} acPMCPConnectionAttributesCommandSuccessCountHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "High threshold. Access: Instant." ::= {acPMCPConnectionAttributes 11} acPMCPConnectionAttributesCommandSuccessCountLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Low threshold. Access: Instant." ::= {acPMCPConnectionAttributes 12} acPMCPConnectionAttributesCommandFailureCountHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "High threshold. Access: Instant." ::= {acPMCPConnectionAttributes 13} acPMCPConnectionAttributesCommandFailureCountLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Low threshold. Access: Instant." ::= {acPMCPConnectionAttributes 14} acPMCPConnectionAttributesCommandProcessTimeHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMCPConnectionAttributes 15} acPMCPConnectionAttributesCommandProcessTimeLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMCPConnectionAttributes 16} acPMCPConnectionAttributesTransactionProcessTimerHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMCPConnectionAttributes 17} acPMCPConnectionAttributesTransactionProcessTimerLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMCPConnectionAttributes 18} acPMMegacoAttributes OBJECT IDENTIFIER ::= {acPMControlConfiguration 33} acPMMegacoAttributesServiceChangeCountHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMegacoAttributes 1} acPMMegacoAttributesServiceChangeCountLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMegacoAttributes 2} acPMMegacoAttributesCmdSuccessCountHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "High threshold. Access: Instant." ::= {acPMMegacoAttributes 3} acPMMegacoAttributesCmdSuccessCountLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMegacoAttributes 4} acPMMegacoAttributesCmdFailureCountHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "High threshold. Access: Instant." ::= {acPMMegacoAttributes 5} acPMMegacoAttributesCmdFailureCountLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMegacoAttributes 6} acPMSipAttributes OBJECT IDENTIFIER ::= {acPMControlConfiguration 34} acPMSipAttributesCallDurationHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMSipAttributes 1} acPMSipAttributesCallDurationLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMSipAttributes 2} acPMSipAttributesTrunkGroupUtilizationHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2016) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMSipAttributes 3} acPMSipAttributesTrunkGroupUtilizationLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2016) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMSipAttributes 4} acPMSipAttributesTrunkGroupPercentageUtilizationHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMSipAttributes 5} acPMSipAttributesTrunkGroupPercentageUtilizationLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMSipAttributes 6} acPMSipAttributesTrunkGroupNoResourcesCallsHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMSipAttributes 7} acPMSipAttributesTrunkGroupNoResourcesCallsLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMSipAttributes 8} acPMSipAttributesIPGroupINVITEDialogsHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMSipAttributes 25} acPMSipAttributesIPGroupINVITEDialogsLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMSipAttributes 26} acPMSipAttributesTrunkGroupAllTrunksBusyPercentageHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMSipAttributes 33} acPMSipAttributesTrunkGroupAllTrunksBusyPercentageLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMSipAttributes 34} acPMMediaRealmAttributes OBJECT IDENTIFIER ::= {acPMControlConfiguration 35} acPMMediaRealmAttributesMediaRealmBytesTxHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMediaRealmAttributes 1} acPMMediaRealmAttributesMediaRealmBytesTxLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMediaRealmAttributes 2} acPMMediaRealmAttributesMediaRealmBytesRxHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMediaRealmAttributes 3} acPMMediaRealmAttributesMediaRealmBytesRxLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMediaRealmAttributes 4} acPMMediaRealmAttributesMediaRealmPacketsTxHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMediaRealmAttributes 5} acPMMediaRealmAttributesMediaRealmPacketsTxLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMediaRealmAttributes 6} acPMMediaRealmAttributesMediaRealmPacketsRxHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMediaRealmAttributes 7} acPMMediaRealmAttributesMediaRealmPacketsRxLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMediaRealmAttributes 8} acPMMediaRealmAttributesVERealmPacketDelayHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMediaRealmAttributes 9} acPMMediaRealmAttributesVERealmPacketDelayLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMediaRealmAttributes 10} acPMMediaRealmAttributesVERealmPacketJitterHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMediaRealmAttributes 11} acPMMediaRealmAttributesVERealmPacketJitterLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMediaRealmAttributes 12} acPMMediaRealmAttributesRealmMOSHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMediaRealmAttributes 13} acPMMediaRealmAttributesRealmMOSLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMediaRealmAttributes 14} acPMMediaRealmAttributesMediaRealmBwRxHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMediaRealmAttributes 15} acPMMediaRealmAttributesMediaRealmBwRxLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMediaRealmAttributes 16} acPMMediaRealmAttributesMediaRealmBwTxHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold. Access: Instant." ::= {acPMMediaRealmAttributes 17} acPMMediaRealmAttributesMediaRealmBwTxLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold. Access: Instant." ::= {acPMMediaRealmAttributes 18} acPMControlData OBJECT IDENTIFIER ::= {acPMControl 2} acPMControlDataAcPMControlTimeFromStartOfInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds since the start of the current interval. MIB specific." ::= {acPMControlData 1} acPMCPConnection OBJECT IDENTIFIER ::= {acPMControlData 31} -- **************************************** -- acPMCPConnectionLifetime table declaration -- **************************************** acPMCPConnectionLifetimeTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMCPConnectionLifetimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Connection lifetime in seconds." ::= {acPMCPConnection 1} -- **************************************** -- acPMCPConnectionLifetime table entry -- **************************************** acPMCPConnectionLifetimeEntry OBJECT-TYPE SYNTAX AcPMCPConnectionLifetimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMCPConnectionLifetimeInterval} ::= {acPMCPConnectionLifetimeTable 1} -- **************************************** -- acPMCPConnectionLifetime TABLE -- **************************************** AcPMCPConnectionLifetimeEntry ::= SEQUENCE { acPMCPConnectionLifetimeInterval Unsigned32, acPMCPConnectionLifetimeVal Gauge32, acPMCPConnectionLifetimeAverage Integer32, acPMCPConnectionLifetimeMax Integer32, acPMCPConnectionLifetimeMin Integer32, acPMCPConnectionLifetimeVolume Counter32, acPMCPConnectionLifetimeTimeBelowLowThreshold Integer32, acPMCPConnectionLifetimeTimeBetweenThresholds Integer32, acPMCPConnectionLifetimeTimeAboveHighThreshold Integer32, acPMCPConnectionLifetimeFullDayAverage Integer32, acPMCPConnectionLifetimeTotal Integer32 } acPMCPConnectionLifetimeInterval OBJECT-TYPE SYNTAX Unsigned32 (0..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last 3 - Two before last 4 - Three before last." ::= {acPMCPConnectionLifetimeEntry 1} acPMCPConnectionLifetimeVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMCPConnectionLifetimeEntry 2} acPMCPConnectionLifetimeAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMCPConnectionLifetimeEntry 3} acPMCPConnectionLifetimeMax OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMCPConnectionLifetimeEntry 4} acPMCPConnectionLifetimeMin OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMCPConnectionLifetimeEntry 5} acPMCPConnectionLifetimeVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMCPConnectionLifetimeEntry 6} acPMCPConnectionLifetimeTimeBelowLowThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is below what was determined as the low threshold." ::= {acPMCPConnectionLifetimeEntry 7} acPMCPConnectionLifetimeTimeBetweenThresholds OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is above what was determined as the high threshold." ::= {acPMCPConnectionLifetimeEntry 8} acPMCPConnectionLifetimeTimeAboveHighThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMCPConnectionLifetimeEntry 9} acPMCPConnectionLifetimeFullDayAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The average of full 24 hours." ::= {acPMCPConnectionLifetimeEntry 10} acPMCPConnectionLifetimeTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMCPConnectionLifetimeEntry 11} -- **************************************** -- acPMCPConnectionState table declaration -- **************************************** acPMCPConnectionStateTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMCPConnectionStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MGC connection activity indicator." ::= {acPMCPConnection 2} -- **************************************** -- acPMCPConnectionState table entry -- **************************************** acPMCPConnectionStateEntry OBJECT-TYPE SYNTAX AcPMCPConnectionStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMCPConnectionStateInterval} ::= {acPMCPConnectionStateTable 1} -- **************************************** -- acPMCPConnectionState TABLE -- **************************************** AcPMCPConnectionStateEntry ::= SEQUENCE { acPMCPConnectionStateInterval Unsigned32, acPMCPConnectionStateChanges Gauge32, acPMCPConnectionStateActiveTime Integer32 } acPMCPConnectionStateInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMCPConnectionStateEntry 1} acPMCPConnectionStateChanges OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMCPConnectionStateEntry 2} acPMCPConnectionStateActiveTime OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMCPConnectionStateEntry 3} -- **************************************** -- acPMCPCommandCounter table declaration -- **************************************** acPMCPCommandCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMCPCommandCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MGC command/response counters. Index: 0=sent commands, 1=received commands" ::= {acPMCPConnection 3} -- **************************************** -- acPMCPCommandCounter table entry -- **************************************** acPMCPCommandCounterEntry OBJECT-TYPE SYNTAX AcPMCPCommandCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMCPCommandCounterDirection,acPMCPCommandCounterInterval} ::= {acPMCPCommandCounterTable 1} -- **************************************** -- acPMCPCommandCounter TABLE -- **************************************** AcPMCPCommandCounterEntry ::= SEQUENCE { acPMCPCommandCounterDirection INTEGER, acPMCPCommandCounterInterval Unsigned32, acPMCPCommandCounterVal Counter32, acPMCPCommandCounterTotal Integer32 } acPMCPCommandCounterDirection OBJECT-TYPE SYNTAX INTEGER { tx(0) , rx(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index. 0 - transmit 1 - receive." ::= {acPMCPCommandCounterEntry 1} acPMCPCommandCounterInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMCPCommandCounterEntry 2} acPMCPCommandCounterVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMCPCommandCounterEntry 3} acPMCPCommandCounterTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMCPCommandCounterEntry 4} -- **************************************** -- acPMCPRetransmissionCount table declaration -- **************************************** acPMCPRetransmissionCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMCPRetransmissionCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of transaction retransmissions. The first direction (tx(0)) counts the transactions sent from the board, while the second direction (rx(1)) counts the incoming retransmissions." ::= {acPMCPConnection 4} -- **************************************** -- acPMCPRetransmissionCount table entry -- **************************************** acPMCPRetransmissionCountEntry OBJECT-TYPE SYNTAX AcPMCPRetransmissionCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMCPRetransmissionCountDirection,acPMCPRetransmissionCountInterval} ::= {acPMCPRetransmissionCountTable 1} -- **************************************** -- acPMCPRetransmissionCount TABLE -- **************************************** AcPMCPRetransmissionCountEntry ::= SEQUENCE { acPMCPRetransmissionCountDirection INTEGER, acPMCPRetransmissionCountInterval Unsigned32, acPMCPRetransmissionCountVal Gauge32, acPMCPRetransmissionCountTotal Integer32 } acPMCPRetransmissionCountDirection OBJECT-TYPE SYNTAX INTEGER { tx(0) , rx(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index. 0 - transmit 1 - receive." ::= {acPMCPRetransmissionCountEntry 1} acPMCPRetransmissionCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMCPRetransmissionCountEntry 2} acPMCPRetransmissionCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMCPRetransmissionCountEntry 3} acPMCPRetransmissionCountTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMCPRetransmissionCountEntry 4} -- **************************************** -- acPMActiveContextCount table declaration -- **************************************** acPMActiveContextCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMActiveContextCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of active contexts" ::= {acPMCPConnection 5} -- **************************************** -- acPMActiveContextCount table entry -- **************************************** acPMActiveContextCountEntry OBJECT-TYPE SYNTAX AcPMActiveContextCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMActiveContextCountInterval} ::= {acPMActiveContextCountTable 1} -- **************************************** -- acPMActiveContextCount TABLE -- **************************************** AcPMActiveContextCountEntry ::= SEQUENCE { acPMActiveContextCountInterval Unsigned32, acPMActiveContextCountVal Gauge32, acPMActiveContextCountAverage Integer32, acPMActiveContextCountMax Integer32, acPMActiveContextCountMin Integer32, acPMActiveContextCountVolume Counter32, acPMActiveContextCountTimeBelowLowThreshold Integer32, acPMActiveContextCountTimeBetweenThresholds Integer32, acPMActiveContextCountTimeAboveHighThreshold Integer32, acPMActiveContextCountFullDayAverage Integer32, acPMActiveContextCountTotal Integer32 } acPMActiveContextCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMActiveContextCountEntry 1} acPMActiveContextCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMActiveContextCountEntry 2} acPMActiveContextCountAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMActiveContextCountEntry 3} acPMActiveContextCountMax OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMActiveContextCountEntry 4} acPMActiveContextCountMin OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMActiveContextCountEntry 5} acPMActiveContextCountVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMActiveContextCountEntry 6} acPMActiveContextCountTimeBelowLowThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is below what was determined as the low threshold." ::= {acPMActiveContextCountEntry 7} acPMActiveContextCountTimeBetweenThresholds OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is above what was determined as the high threshold." ::= {acPMActiveContextCountEntry 8} acPMActiveContextCountTimeAboveHighThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMActiveContextCountEntry 9} acPMActiveContextCountFullDayAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The average of full 24 hours." ::= {acPMActiveContextCountEntry 10} acPMActiveContextCountTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMActiveContextCountEntry 11} -- **************************************** -- acPMCPCommandSuccessCount table declaration -- **************************************** acPMCPCommandSuccessCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMCPCommandSuccessCountEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Number of successful commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify" ::= {acPMCPConnection 6} -- **************************************** -- acPMCPCommandSuccessCount table entry -- **************************************** acPMCPCommandSuccessCountEntry OBJECT-TYPE SYNTAX AcPMCPCommandSuccessCountEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" INDEX {acPMCPCommandSuccessCountCommandType,acPMCPCommandSuccessCountInterval} ::= {acPMCPCommandSuccessCountTable 1} -- **************************************** -- acPMCPCommandSuccessCount TABLE -- **************************************** AcPMCPCommandSuccessCountEntry ::= SEQUENCE { acPMCPCommandSuccessCountCommandType INTEGER, acPMCPCommandSuccessCountInterval Unsigned32, acPMCPCommandSuccessCountVal Gauge32, acPMCPCommandSuccessCountTotal Integer32 } acPMCPCommandSuccessCountCommandType OBJECT-TYPE SYNTAX INTEGER { add(0) , move(1) , modify(2) , subtract(3) , sc(4) , auditValue(5) , auditCapabilities(6) , notify(7) } MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Command type: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify." ::= {acPMCPCommandSuccessCountEntry 1} acPMCPCommandSuccessCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMCPCommandSuccessCountEntry 2} acPMCPCommandSuccessCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Value of gauge or counter." ::= {acPMCPCommandSuccessCountEntry 3} acPMCPCommandSuccessCountTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Total since last reset." ::= {acPMCPCommandSuccessCountEntry 4} -- **************************************** -- acPMCPCommandFailureCount table declaration -- **************************************** acPMCPCommandFailureCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMCPCommandFailureCountEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Number of failing commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify" ::= {acPMCPConnection 7} -- **************************************** -- acPMCPCommandFailureCount table entry -- **************************************** acPMCPCommandFailureCountEntry OBJECT-TYPE SYNTAX AcPMCPCommandFailureCountEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" INDEX {acPMCPCommandFailureCountCommandType,acPMCPCommandFailureCountInterval} ::= {acPMCPCommandFailureCountTable 1} -- **************************************** -- acPMCPCommandFailureCount TABLE -- **************************************** AcPMCPCommandFailureCountEntry ::= SEQUENCE { acPMCPCommandFailureCountCommandType INTEGER, acPMCPCommandFailureCountInterval Unsigned32, acPMCPCommandFailureCountVal Gauge32, acPMCPCommandFailureCountTotal Integer32 } acPMCPCommandFailureCountCommandType OBJECT-TYPE SYNTAX INTEGER { add(0) , move(1) , modify(2) , subtract(3) , sc(4) , auditValue(5) , auditCapabilities(6) , notify(7) } MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Command type: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify." ::= {acPMCPCommandFailureCountEntry 1} acPMCPCommandFailureCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMCPCommandFailureCountEntry 2} acPMCPCommandFailureCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Value of gauge or counter." ::= {acPMCPCommandFailureCountEntry 3} acPMCPCommandFailureCountTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMCPCommandFailureCountEntry 4} -- **************************************** -- acPMcpCmdProcessTime table declaration -- **************************************** acPMcpCmdProcessTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMcpCmdProcessTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Processing time (in Microseconds), per command type." ::= {acPMCPConnection 8} -- **************************************** -- acPMcpCmdProcessTime table entry -- **************************************** acPMcpCmdProcessTimeEntry OBJECT-TYPE SYNTAX AcPMcpCmdProcessTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMcpCmdProcessTimeInterval} ::= {acPMcpCmdProcessTimeTable 1} -- **************************************** -- acPMcpCmdProcessTime TABLE -- **************************************** AcPMcpCmdProcessTimeEntry ::= SEQUENCE { acPMcpCmdProcessTimeInterval Unsigned32, acPMcpCmdProcessTimeVal Gauge32, acPMcpCmdProcessTimeAverage Integer32, acPMcpCmdProcessTimeMax Integer32, acPMcpCmdProcessTimeMin Integer32, acPMcpCmdProcessTimeVolume Counter32, acPMcpCmdProcessTimeTimeBelowLowThreshold Integer32, acPMcpCmdProcessTimeTimeBetweenThresholds Integer32, acPMcpCmdProcessTimeTimeAboveHighThreshold Integer32, acPMcpCmdProcessTimeFullDayAverage Integer32, acPMcpCmdProcessTimeTotal Integer32 } acPMcpCmdProcessTimeInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMcpCmdProcessTimeEntry 1} acPMcpCmdProcessTimeVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMcpCmdProcessTimeEntry 2} acPMcpCmdProcessTimeAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMcpCmdProcessTimeEntry 3} acPMcpCmdProcessTimeMax OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMcpCmdProcessTimeEntry 4} acPMcpCmdProcessTimeMin OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMcpCmdProcessTimeEntry 5} acPMcpCmdProcessTimeVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMcpCmdProcessTimeEntry 6} acPMcpCmdProcessTimeTimeBelowLowThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is below what was determined as the low threshold." ::= {acPMcpCmdProcessTimeEntry 7} acPMcpCmdProcessTimeTimeBetweenThresholds OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is above what was determined as the high threshold." ::= {acPMcpCmdProcessTimeEntry 8} acPMcpCmdProcessTimeTimeAboveHighThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMcpCmdProcessTimeEntry 9} acPMcpCmdProcessTimeFullDayAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The average of full 24 hours." ::= {acPMcpCmdProcessTimeEntry 10} acPMcpCmdProcessTimeTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMcpCmdProcessTimeEntry 11} -- **************************************** -- acPMcpTransactionProcessTimer table declaration -- **************************************** acPMcpTransactionProcessTimerTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMcpTransactionProcessTimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Processing time (in Microseconds), For transaction request." ::= {acPMCPConnection 9} -- **************************************** -- acPMcpTransactionProcessTimer table entry -- **************************************** acPMcpTransactionProcessTimerEntry OBJECT-TYPE SYNTAX AcPMcpTransactionProcessTimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMcpTransactionProcessTimerInterval} ::= {acPMcpTransactionProcessTimerTable 1} -- **************************************** -- acPMcpTransactionProcessTimer TABLE -- **************************************** AcPMcpTransactionProcessTimerEntry ::= SEQUENCE { acPMcpTransactionProcessTimerInterval Unsigned32, acPMcpTransactionProcessTimerVal Gauge32, acPMcpTransactionProcessTimerAverage Integer32, acPMcpTransactionProcessTimerMax Integer32, acPMcpTransactionProcessTimerMin Integer32, acPMcpTransactionProcessTimerVolume Counter32, acPMcpTransactionProcessTimerTimeBelowLowThreshold Integer32, acPMcpTransactionProcessTimerTimeBetweenThresholds Integer32, acPMcpTransactionProcessTimerTimeAboveHighThreshold Integer32, acPMcpTransactionProcessTimerFullDayAverage Integer32, acPMcpTransactionProcessTimerTotal Integer32 } acPMcpTransactionProcessTimerInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMcpTransactionProcessTimerEntry 1} acPMcpTransactionProcessTimerVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMcpTransactionProcessTimerEntry 2} acPMcpTransactionProcessTimerAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMcpTransactionProcessTimerEntry 3} acPMcpTransactionProcessTimerMax OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMcpTransactionProcessTimerEntry 4} acPMcpTransactionProcessTimerMin OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMcpTransactionProcessTimerEntry 5} acPMcpTransactionProcessTimerVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMcpTransactionProcessTimerEntry 6} acPMcpTransactionProcessTimerTimeBelowLowThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is below what was determined as the low threshold." ::= {acPMcpTransactionProcessTimerEntry 7} acPMcpTransactionProcessTimerTimeBetweenThresholds OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is above what was determined as the high threshold." ::= {acPMcpTransactionProcessTimerEntry 8} acPMcpTransactionProcessTimerTimeAboveHighThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMcpTransactionProcessTimerEntry 9} acPMcpTransactionProcessTimerFullDayAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The average of full 24 hours." ::= {acPMcpTransactionProcessTimerEntry 10} acPMcpTransactionProcessTimerTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMcpTransactionProcessTimerEntry 11} -- **************************************** -- acPMCPCallAttemptsPerSec table declaration -- **************************************** acPMCPCallAttemptsPerSecTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMCPCallAttemptsPerSecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of Call attempts (successful and unsuccessful) for second" ::= {acPMCPConnection 10} -- **************************************** -- acPMCPCallAttemptsPerSec table entry -- **************************************** acPMCPCallAttemptsPerSecEntry OBJECT-TYPE SYNTAX AcPMCPCallAttemptsPerSecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMCPCallAttemptsPerSecInterval} ::= {acPMCPCallAttemptsPerSecTable 1} -- **************************************** -- acPMCPCallAttemptsPerSec TABLE -- **************************************** AcPMCPCallAttemptsPerSecEntry ::= SEQUENCE { acPMCPCallAttemptsPerSecInterval Unsigned32, acPMCPCallAttemptsPerSecVal Gauge32, acPMCPCallAttemptsPerSecAverage Integer32, acPMCPCallAttemptsPerSecMax Integer32, acPMCPCallAttemptsPerSecMin Integer32, acPMCPCallAttemptsPerSecVolume Counter32 } acPMCPCallAttemptsPerSecInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMCPCallAttemptsPerSecEntry 1} acPMCPCallAttemptsPerSecVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMCPCallAttemptsPerSecEntry 2} acPMCPCallAttemptsPerSecAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMCPCallAttemptsPerSecEntry 3} acPMCPCallAttemptsPerSecMax OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMCPCallAttemptsPerSecEntry 4} acPMCPCallAttemptsPerSecMin OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMCPCallAttemptsPerSecEntry 5} acPMCPCallAttemptsPerSecVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMCPCallAttemptsPerSecEntry 6} acPMMegaco OBJECT IDENTIFIER ::= {acPMControlData 41} -- **************************************** -- acPMMegacoServiceChangeCount table declaration -- **************************************** acPMMegacoServiceChangeCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMegacoServiceChangeCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of service changes, per method. Index: 0=FailOver, 1=Forced, 2=Graceful, 3=Restart, 4=Disconnected, 5=Handoff" ::= {acPMMegaco 1} -- **************************************** -- acPMMegacoServiceChangeCount table entry -- **************************************** acPMMegacoServiceChangeCountEntry OBJECT-TYPE SYNTAX AcPMMegacoServiceChangeCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMegacoServiceChangeCountMethod,acPMMegacoServiceChangeCountInterval} ::= {acPMMegacoServiceChangeCountTable 1} -- **************************************** -- acPMMegacoServiceChangeCount TABLE -- **************************************** AcPMMegacoServiceChangeCountEntry ::= SEQUENCE { acPMMegacoServiceChangeCountMethod INTEGER, acPMMegacoServiceChangeCountInterval Unsigned32, acPMMegacoServiceChangeCountVal Gauge32 } acPMMegacoServiceChangeCountMethod OBJECT-TYPE SYNTAX INTEGER { failOver(0) , forced(1) , graceful(2) , restart(3) , disconnected(4) , handoff(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Method: 0=FailOver, 1=Forced, 2=Graceful, 3=Restart, 4=Disconnected, 5=Handoff." ::= {acPMMegacoServiceChangeCountEntry 1} acPMMegacoServiceChangeCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMegacoServiceChangeCountEntry 2} acPMMegacoServiceChangeCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMegacoServiceChangeCountEntry 3} -- **************************************** -- acPMCPCmdSuccessCount table declaration -- **************************************** acPMCPCmdSuccessCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMCPCmdSuccessCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of successful commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify" ::= {acPMMegaco 2} -- **************************************** -- acPMCPCmdSuccessCount table entry -- **************************************** acPMCPCmdSuccessCountEntry OBJECT-TYPE SYNTAX AcPMCPCmdSuccessCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMCPCmdSuccessCountCommandType,acPMCPCmdSuccessCountInterval} ::= {acPMCPCmdSuccessCountTable 1} -- **************************************** -- acPMCPCmdSuccessCount TABLE -- **************************************** AcPMCPCmdSuccessCountEntry ::= SEQUENCE { acPMCPCmdSuccessCountCommandType INTEGER, acPMCPCmdSuccessCountInterval Unsigned32, acPMCPCmdSuccessCountVal Gauge32, acPMCPCmdSuccessCountTotal Integer32 } acPMCPCmdSuccessCountCommandType OBJECT-TYPE SYNTAX INTEGER { add(0) , move(1) , modify(2) , subtract(3) , sc(4) , auditValue(5) , auditCapabilities(6) , notify(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Command type: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify." ::= {acPMCPCmdSuccessCountEntry 1} acPMCPCmdSuccessCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMCPCmdSuccessCountEntry 2} acPMCPCmdSuccessCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMCPCmdSuccessCountEntry 3} acPMCPCmdSuccessCountTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMCPCmdSuccessCountEntry 4} -- **************************************** -- acPMCPCmdFailureCount table declaration -- **************************************** acPMCPCmdFailureCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMCPCmdFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of failing commands, per command type. Index: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify" ::= {acPMMegaco 3} -- **************************************** -- acPMCPCmdFailureCount table entry -- **************************************** acPMCPCmdFailureCountEntry OBJECT-TYPE SYNTAX AcPMCPCmdFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMCPCmdFailureCountCommandType,acPMCPCmdFailureCountInterval} ::= {acPMCPCmdFailureCountTable 1} -- **************************************** -- acPMCPCmdFailureCount TABLE -- **************************************** AcPMCPCmdFailureCountEntry ::= SEQUENCE { acPMCPCmdFailureCountCommandType INTEGER, acPMCPCmdFailureCountInterval Unsigned32, acPMCPCmdFailureCountVal Gauge32, acPMCPCmdFailureCountTotal Integer32 } acPMCPCmdFailureCountCommandType OBJECT-TYPE SYNTAX INTEGER { add(0) , move(1) , modify(2) , subtract(3) , sc(4) , auditValue(5) , auditCapabilities(6) , notify(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Command type: 0=add, 1=move, 2=modify, 3=subtract, 4=SC, 5=AuditValue, 6=AuditCapabilities, 7=Notify." ::= {acPMCPCmdFailureCountEntry 1} acPMCPCmdFailureCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMCPCmdFailureCountEntry 2} acPMCPCmdFailureCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMCPCmdFailureCountEntry 3} acPMCPCmdFailureCountTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMCPCmdFailureCountEntry 4} -- **************************************** -- acPMcpUMTSHandOverCount table declaration -- **************************************** acPMcpUMTSHandOverCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMcpUMTSHandOverCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of active channels per trunk (index: trunk number)." ::= {acPMMegaco 4} -- **************************************** -- acPMcpUMTSHandOverCount table entry -- **************************************** acPMcpUMTSHandOverCountEntry OBJECT-TYPE SYNTAX AcPMcpUMTSHandOverCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMcpUMTSHandOverCountInterval} ::= {acPMcpUMTSHandOverCountTable 1} -- **************************************** -- acPMcpUMTSHandOverCount TABLE -- **************************************** AcPMcpUMTSHandOverCountEntry ::= SEQUENCE { acPMcpUMTSHandOverCountInterval Unsigned32, acPMcpUMTSHandOverCountVal Gauge32 } acPMcpUMTSHandOverCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMcpUMTSHandOverCountEntry 1} acPMcpUMTSHandOverCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMcpUMTSHandOverCountEntry 2} -- **************************************** -- acPMMegacoAddFailureCount table declaration -- **************************************** acPMMegacoAddFailureCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMegacoAddFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of Megaco failures for Add" ::= {acPMMegaco 5} -- **************************************** -- acPMMegacoAddFailureCount table entry -- **************************************** acPMMegacoAddFailureCountEntry OBJECT-TYPE SYNTAX AcPMMegacoAddFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMegacoAddFailureCountInterval} ::= {acPMMegacoAddFailureCountTable 1} -- **************************************** -- acPMMegacoAddFailureCount TABLE -- **************************************** AcPMMegacoAddFailureCountEntry ::= SEQUENCE { acPMMegacoAddFailureCountInterval Unsigned32, acPMMegacoAddFailureCountVal Gauge32 } acPMMegacoAddFailureCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMegacoAddFailureCountEntry 1} acPMMegacoAddFailureCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMegacoAddFailureCountEntry 2} -- **************************************** -- acPMMegacoModifyFailureCount table declaration -- **************************************** acPMMegacoModifyFailureCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMegacoModifyFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of Megaco failures for Modify " ::= {acPMMegaco 6} -- **************************************** -- acPMMegacoModifyFailureCount table entry -- **************************************** acPMMegacoModifyFailureCountEntry OBJECT-TYPE SYNTAX AcPMMegacoModifyFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMegacoModifyFailureCountInterval} ::= {acPMMegacoModifyFailureCountTable 1} -- **************************************** -- acPMMegacoModifyFailureCount TABLE -- **************************************** AcPMMegacoModifyFailureCountEntry ::= SEQUENCE { acPMMegacoModifyFailureCountInterval Unsigned32, acPMMegacoModifyFailureCountVal Gauge32 } acPMMegacoModifyFailureCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMegacoModifyFailureCountEntry 1} acPMMegacoModifyFailureCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMegacoModifyFailureCountEntry 2} -- **************************************** -- acPMMegacoSuccessfulAddWithLoopback table declaration -- **************************************** acPMMegacoSuccessfulAddWithLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMegacoSuccessfulAddWithLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of successful Megaco Add commands with loopback." ::= {acPMMegaco 7} -- **************************************** -- acPMMegacoSuccessfulAddWithLoopback table entry -- **************************************** acPMMegacoSuccessfulAddWithLoopbackEntry OBJECT-TYPE SYNTAX AcPMMegacoSuccessfulAddWithLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMegacoSuccessfulAddWithLoopbackInterval} ::= {acPMMegacoSuccessfulAddWithLoopbackTable 1} -- **************************************** -- acPMMegacoSuccessfulAddWithLoopback TABLE -- **************************************** AcPMMegacoSuccessfulAddWithLoopbackEntry ::= SEQUENCE { acPMMegacoSuccessfulAddWithLoopbackInterval Unsigned32, acPMMegacoSuccessfulAddWithLoopbackVal Gauge32 } acPMMegacoSuccessfulAddWithLoopbackInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMegacoSuccessfulAddWithLoopbackEntry 1} acPMMegacoSuccessfulAddWithLoopbackVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMegacoSuccessfulAddWithLoopbackEntry 2} -- **************************************** -- acPMMegacoFailedAddWithLoopback table declaration -- **************************************** acPMMegacoFailedAddWithLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMegacoFailedAddWithLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of failed Megaco Add commands with loopback." ::= {acPMMegaco 8} -- **************************************** -- acPMMegacoFailedAddWithLoopback table entry -- **************************************** acPMMegacoFailedAddWithLoopbackEntry OBJECT-TYPE SYNTAX AcPMMegacoFailedAddWithLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMegacoFailedAddWithLoopbackInterval} ::= {acPMMegacoFailedAddWithLoopbackTable 1} -- **************************************** -- acPMMegacoFailedAddWithLoopback TABLE -- **************************************** AcPMMegacoFailedAddWithLoopbackEntry ::= SEQUENCE { acPMMegacoFailedAddWithLoopbackInterval Unsigned32, acPMMegacoFailedAddWithLoopbackVal Gauge32 } acPMMegacoFailedAddWithLoopbackInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMegacoFailedAddWithLoopbackEntry 1} acPMMegacoFailedAddWithLoopbackVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMegacoFailedAddWithLoopbackEntry 2} -- **************************************** -- acPMMegacoOutgoingCommandSuccessCount table declaration -- **************************************** acPMMegacoOutgoingCommandSuccessCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMegacoOutgoingCommandSuccessCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of successful Megaco outgoing commands." ::= {acPMMegaco 9} -- **************************************** -- acPMMegacoOutgoingCommandSuccessCount table entry -- **************************************** acPMMegacoOutgoingCommandSuccessCountEntry OBJECT-TYPE SYNTAX AcPMMegacoOutgoingCommandSuccessCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMegacoOutgoingCommandSuccessCountInterval} ::= {acPMMegacoOutgoingCommandSuccessCountTable 1} -- **************************************** -- acPMMegacoOutgoingCommandSuccessCount TABLE -- **************************************** AcPMMegacoOutgoingCommandSuccessCountEntry ::= SEQUENCE { acPMMegacoOutgoingCommandSuccessCountInterval Unsigned32, acPMMegacoOutgoingCommandSuccessCountVal Gauge32 } acPMMegacoOutgoingCommandSuccessCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMegacoOutgoingCommandSuccessCountEntry 1} acPMMegacoOutgoingCommandSuccessCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMegacoOutgoingCommandSuccessCountEntry 2} -- **************************************** -- acPMMegacoOutgoingCommandFailureCount table declaration -- **************************************** acPMMegacoOutgoingCommandFailureCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMegacoOutgoingCommandFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of failed Megaco outgoing commands ." ::= {acPMMegaco 10} -- **************************************** -- acPMMegacoOutgoingCommandFailureCount table entry -- **************************************** acPMMegacoOutgoingCommandFailureCountEntry OBJECT-TYPE SYNTAX AcPMMegacoOutgoingCommandFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMegacoOutgoingCommandFailureCountInterval} ::= {acPMMegacoOutgoingCommandFailureCountTable 1} -- **************************************** -- acPMMegacoOutgoingCommandFailureCount TABLE -- **************************************** AcPMMegacoOutgoingCommandFailureCountEntry ::= SEQUENCE { acPMMegacoOutgoingCommandFailureCountInterval Unsigned32, acPMMegacoOutgoingCommandFailureCountVal Gauge32 } acPMMegacoOutgoingCommandFailureCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMegacoOutgoingCommandFailureCountEntry 1} acPMMegacoOutgoingCommandFailureCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMegacoOutgoingCommandFailureCountEntry 2} acPMMGCP OBJECT IDENTIFIER ::= {acPMControlData 51} -- **************************************** -- acPMMGCPRsipReasonCount table declaration -- **************************************** acPMMGCPRsipReasonCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPRsipReasonCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of RSIPs, per reason code." ::= {acPMMGCP 1} -- **************************************** -- acPMMGCPRsipReasonCount table entry -- **************************************** acPMMGCPRsipReasonCountEntry OBJECT-TYPE SYNTAX AcPMMGCPRsipReasonCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPRsipReasonCountReasonCode,acPMMGCPRsipReasonCountInterval} ::= {acPMMGCPRsipReasonCountTable 1} -- **************************************** -- acPMMGCPRsipReasonCount TABLE -- **************************************** AcPMMGCPRsipReasonCountEntry ::= SEQUENCE { acPMMGCPRsipReasonCountReasonCode INTEGER, acPMMGCPRsipReasonCountInterval Unsigned32, acPMMGCPRsipReasonCountVal Counter32 } acPMMGCPRsipReasonCountReasonCode OBJECT-TYPE SYNTAX INTEGER { restart(0) , forced(1) , disconnected(2) , keepAlive(3) , graceful(4) , cancelGraceful(5) , resetBoard(6) , nonVoice(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reason code. Index: 0=Restart, 1=Forced, 2=Disconnected, 3=KeepAlive, 4=Graceful, 5=CancelGraceful, 6=ResetBoard, 7=NonVoice." ::= {acPMMGCPRsipReasonCountEntry 1} acPMMGCPRsipReasonCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPRsipReasonCountEntry 2} acPMMGCPRsipReasonCountVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPRsipReasonCountEntry 3} -- **************************************** -- acPMMGCPGeneratedDLCX table declaration -- **************************************** acPMMGCPGeneratedDLCXTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPGeneratedDLCXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter counts the number of gateway-generated DLCX commands (as opposed to DLCX commands received from the call-agent)." ::= {acPMMGCP 2} -- **************************************** -- acPMMGCPGeneratedDLCX table entry -- **************************************** acPMMGCPGeneratedDLCXEntry OBJECT-TYPE SYNTAX AcPMMGCPGeneratedDLCXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPGeneratedDLCXInterval} ::= {acPMMGCPGeneratedDLCXTable 1} -- **************************************** -- acPMMGCPGeneratedDLCX TABLE -- **************************************** AcPMMGCPGeneratedDLCXEntry ::= SEQUENCE { acPMMGCPGeneratedDLCXInterval Unsigned32, acPMMGCPGeneratedDLCXVal Counter32 } acPMMGCPGeneratedDLCXInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPGeneratedDLCXEntry 1} acPMMGCPGeneratedDLCXVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPGeneratedDLCXEntry 2} -- **************************************** -- acPMMGCPCommandSuccessCount table declaration -- **************************************** acPMMGCPCommandSuccessCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPCommandSuccessCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of successful commands, per command type. Index: EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8)." ::= {acPMMGCP 3} -- **************************************** -- acPMMGCPCommandSuccessCount table entry -- **************************************** acPMMGCPCommandSuccessCountEntry OBJECT-TYPE SYNTAX AcPMMGCPCommandSuccessCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPCommandSuccessCountCommandType,acPMMGCPCommandSuccessCountInterval} ::= {acPMMGCPCommandSuccessCountTable 1} -- **************************************** -- acPMMGCPCommandSuccessCount TABLE -- **************************************** AcPMMGCPCommandSuccessCountEntry ::= SEQUENCE { acPMMGCPCommandSuccessCountCommandType INTEGER, acPMMGCPCommandSuccessCountInterval Unsigned32, acPMMGCPCommandSuccessCountVal Gauge32, acPMMGCPCommandSuccessCountTotal Integer32 } acPMMGCPCommandSuccessCountCommandType OBJECT-TYPE SYNTAX INTEGER { add(0) , move(1) , modify(2) , subtract(3) , sc(4) , auditValue(5) , auditCapabilities(6) , notify(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Command type:EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8)." ::= {acPMMGCPCommandSuccessCountEntry 1} acPMMGCPCommandSuccessCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPCommandSuccessCountEntry 2} acPMMGCPCommandSuccessCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPCommandSuccessCountEntry 3} acPMMGCPCommandSuccessCountTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMMGCPCommandSuccessCountEntry 4} -- **************************************** -- acPMMGCPCommandFailureCount table declaration -- **************************************** acPMMGCPCommandFailureCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPCommandFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of failing commands, per command type. Index: EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8)." ::= {acPMMGCP 4} -- **************************************** -- acPMMGCPCommandFailureCount table entry -- **************************************** acPMMGCPCommandFailureCountEntry OBJECT-TYPE SYNTAX AcPMMGCPCommandFailureCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPCommandFailureCountCommandType,acPMMGCPCommandFailureCountInterval} ::= {acPMMGCPCommandFailureCountTable 1} -- **************************************** -- acPMMGCPCommandFailureCount TABLE -- **************************************** AcPMMGCPCommandFailureCountEntry ::= SEQUENCE { acPMMGCPCommandFailureCountCommandType INTEGER, acPMMGCPCommandFailureCountInterval Unsigned32, acPMMGCPCommandFailureCountVal Gauge32, acPMMGCPCommandFailureCountTotal Integer32 } acPMMGCPCommandFailureCountCommandType OBJECT-TYPE SYNTAX INTEGER { add(0) , move(1) , modify(2) , subtract(3) , sc(4) , auditValue(5) , auditCapabilities(6) , notify(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Command type:EPCF (0),CRCX (1),MDCX (2),DLCX (3),RQNT (4),NTFY (5),AUEP(6),AUCX (7),RSIP(8)." ::= {acPMMGCPCommandFailureCountEntry 1} acPMMGCPCommandFailureCountInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPCommandFailureCountEntry 2} acPMMGCPCommandFailureCountVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPCommandFailureCountEntry 3} acPMMGCPCommandFailureCountTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMMGCPCommandFailureCountEntry 4} -- **************************************** -- acPMMGCPLoopbackCRCX table declaration -- **************************************** acPMMGCPLoopbackCRCXTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPLoopbackCRCXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acPMMGCP 5} -- **************************************** -- acPMMGCPLoopbackCRCX table entry -- **************************************** acPMMGCPLoopbackCRCXEntry OBJECT-TYPE SYNTAX AcPMMGCPLoopbackCRCXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPLoopbackCRCXInterval} ::= {acPMMGCPLoopbackCRCXTable 1} -- **************************************** -- acPMMGCPLoopbackCRCX TABLE -- **************************************** AcPMMGCPLoopbackCRCXEntry ::= SEQUENCE { acPMMGCPLoopbackCRCXInterval Unsigned32, acPMMGCPLoopbackCRCXVal Counter32 } acPMMGCPLoopbackCRCXInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPLoopbackCRCXEntry 1} acPMMGCPLoopbackCRCXVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPLoopbackCRCXEntry 2} -- **************************************** -- acPMMGCPFailedLoopbackCRCX table declaration -- **************************************** acPMMGCPFailedLoopbackCRCXTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPFailedLoopbackCRCXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acPMMGCP 6} -- **************************************** -- acPMMGCPFailedLoopbackCRCX table entry -- **************************************** acPMMGCPFailedLoopbackCRCXEntry OBJECT-TYPE SYNTAX AcPMMGCPFailedLoopbackCRCXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPFailedLoopbackCRCXInterval} ::= {acPMMGCPFailedLoopbackCRCXTable 1} -- **************************************** -- acPMMGCPFailedLoopbackCRCX TABLE -- **************************************** AcPMMGCPFailedLoopbackCRCXEntry ::= SEQUENCE { acPMMGCPFailedLoopbackCRCXInterval Unsigned32, acPMMGCPFailedLoopbackCRCXVal Counter32 } acPMMGCPFailedLoopbackCRCXInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPFailedLoopbackCRCXEntry 1} acPMMGCPFailedLoopbackCRCXVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPFailedLoopbackCRCXEntry 2} -- **************************************** -- acPMMGCPGeneratedNTFY table declaration -- **************************************** acPMMGCPGeneratedNTFYTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPGeneratedNTFYEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acPMMGCP 7} -- **************************************** -- acPMMGCPGeneratedNTFY table entry -- **************************************** acPMMGCPGeneratedNTFYEntry OBJECT-TYPE SYNTAX AcPMMGCPGeneratedNTFYEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPGeneratedNTFYInterval} ::= {acPMMGCPGeneratedNTFYTable 1} -- **************************************** -- acPMMGCPGeneratedNTFY TABLE -- **************************************** AcPMMGCPGeneratedNTFYEntry ::= SEQUENCE { acPMMGCPGeneratedNTFYInterval Unsigned32, acPMMGCPGeneratedNTFYVal Counter32 } acPMMGCPGeneratedNTFYInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPGeneratedNTFYEntry 1} acPMMGCPGeneratedNTFYVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPGeneratedNTFYEntry 2} -- **************************************** -- acPMMGCPFailedNTFYResponses table declaration -- **************************************** acPMMGCPFailedNTFYResponsesTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPFailedNTFYResponsesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acPMMGCP 8} -- **************************************** -- acPMMGCPFailedNTFYResponses table entry -- **************************************** acPMMGCPFailedNTFYResponsesEntry OBJECT-TYPE SYNTAX AcPMMGCPFailedNTFYResponsesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPFailedNTFYResponsesInterval} ::= {acPMMGCPFailedNTFYResponsesTable 1} -- **************************************** -- acPMMGCPFailedNTFYResponses TABLE -- **************************************** AcPMMGCPFailedNTFYResponsesEntry ::= SEQUENCE { acPMMGCPFailedNTFYResponsesInterval Unsigned32, acPMMGCPFailedNTFYResponsesVal Counter32 } acPMMGCPFailedNTFYResponsesInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPFailedNTFYResponsesEntry 1} acPMMGCPFailedNTFYResponsesVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPFailedNTFYResponsesEntry 2} -- **************************************** -- acPMMGCPFailedRSIPResponses table declaration -- **************************************** acPMMGCPFailedRSIPResponsesTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPFailedRSIPResponsesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acPMMGCP 9} -- **************************************** -- acPMMGCPFailedRSIPResponses table entry -- **************************************** acPMMGCPFailedRSIPResponsesEntry OBJECT-TYPE SYNTAX AcPMMGCPFailedRSIPResponsesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPFailedRSIPResponsesInterval} ::= {acPMMGCPFailedRSIPResponsesTable 1} -- **************************************** -- acPMMGCPFailedRSIPResponses TABLE -- **************************************** AcPMMGCPFailedRSIPResponsesEntry ::= SEQUENCE { acPMMGCPFailedRSIPResponsesInterval Unsigned32, acPMMGCPFailedRSIPResponsesVal Counter32 } acPMMGCPFailedRSIPResponsesInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPFailedRSIPResponsesEntry 1} acPMMGCPFailedRSIPResponsesVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPFailedRSIPResponsesEntry 2} -- **************************************** -- acPMMGCPFailedCRCXResponses table declaration -- **************************************** acPMMGCPFailedCRCXResponsesTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPFailedCRCXResponsesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of failed responses to CRCX commands, per reason code." ::= {acPMMGCP 10} -- **************************************** -- acPMMGCPFailedCRCXResponses table entry -- **************************************** acPMMGCPFailedCRCXResponsesEntry OBJECT-TYPE SYNTAX AcPMMGCPFailedCRCXResponsesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPFailedCRCXResponsesReasonCode,acPMMGCPFailedCRCXResponsesInterval} ::= {acPMMGCPFailedCRCXResponsesTable 1} -- **************************************** -- acPMMGCPFailedCRCXResponses TABLE -- **************************************** AcPMMGCPFailedCRCXResponsesEntry ::= SEQUENCE { acPMMGCPFailedCRCXResponsesReasonCode INTEGER, acPMMGCPFailedCRCXResponsesInterval Unsigned32, acPMMGCPFailedCRCXResponsesVal Counter32 } acPMMGCPFailedCRCXResponsesReasonCode OBJECT-TYPE SYNTAX INTEGER { reasoncode-400(0) , reasoncode-401(1) , reasoncode-402(2) , reasoncode-403(3) , reasoncode-404(4) , reasoncode-405(5) , reasoncode-406(6) , reasoncode-407(7) , reasoncode-409(8) , reasoncode-410(9) , reasoncode-500(10) , reasoncode-501(11) , reasoncode-502(12) , reasoncode-503(13) , reasoncode-504(14) , reasoncode-505(15) , reasoncode-506(16) , reasoncode-507(17) , reasoncode-508(18) , reasoncode-509(19) , reasoncode-510(20) , reasoncode-511(21) , reasoncode-512(22) , reasoncode-513(23) , reasoncode-514(24) , reasoncode-515(25) , reasoncode-516(26) , reasoncode-517(27) , reasoncode-518(28) , reasoncode-519(29) , reasoncode-520(30) , reasoncode-521(31) , reasoncode-522(32) , reasoncode-523(33) , reasoncode-524(34) , reasoncode-525(35) , reasoncode-526(36) , reasoncode-527(37) , reasoncode-528(38) , reasoncode-529(39) , reasoncode-530(40) , reasoncode-531(41) , reasoncode-532(42) , reasoncode-533(43) , reasoncode-534(44) , reasoncode-535(45) , reasoncode-536(46) , reasoncode-537(47) , reasoncode-538(48) , reasoncode-539(49) , reasoncode-540(50) , reasoncode-541(51) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reason code Index. The Numbers at the values are as in the RFC." ::= {acPMMGCPFailedCRCXResponsesEntry 1} acPMMGCPFailedCRCXResponsesInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPFailedCRCXResponsesEntry 2} acPMMGCPFailedCRCXResponsesVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPFailedCRCXResponsesEntry 3} -- **************************************** -- acPMMGCPFailedMDCXResponses table declaration -- **************************************** acPMMGCPFailedMDCXResponsesTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPFailedMDCXResponsesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of failed responses to CRCX commands, per reason code." ::= {acPMMGCP 11} -- **************************************** -- acPMMGCPFailedMDCXResponses table entry -- **************************************** acPMMGCPFailedMDCXResponsesEntry OBJECT-TYPE SYNTAX AcPMMGCPFailedMDCXResponsesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPFailedMDCXResponsesReasonCode,acPMMGCPFailedMDCXResponsesInterval} ::= {acPMMGCPFailedMDCXResponsesTable 1} -- **************************************** -- acPMMGCPFailedMDCXResponses TABLE -- **************************************** AcPMMGCPFailedMDCXResponsesEntry ::= SEQUENCE { acPMMGCPFailedMDCXResponsesReasonCode INTEGER, acPMMGCPFailedMDCXResponsesInterval Unsigned32, acPMMGCPFailedMDCXResponsesVal Counter32 } acPMMGCPFailedMDCXResponsesReasonCode OBJECT-TYPE SYNTAX INTEGER { reasoncode-400(0) , reasoncode-401(1) , reasoncode-402(2) , reasoncode-403(3) , reasoncode-404(4) , reasoncode-405(5) , reasoncode-406(6) , reasoncode-407(7) , reasoncode-409(8) , reasoncode-410(9) , reasoncode-500(10) , reasoncode-501(11) , reasoncode-502(12) , reasoncode-503(13) , reasoncode-504(14) , reasoncode-505(15) , reasoncode-506(16) , reasoncode-507(17) , reasoncode-508(18) , reasoncode-509(19) , reasoncode-510(20) , reasoncode-511(21) , reasoncode-512(22) , reasoncode-513(23) , reasoncode-514(24) , reasoncode-515(25) , reasoncode-516(26) , reasoncode-517(27) , reasoncode-518(28) , reasoncode-519(29) , reasoncode-520(30) , reasoncode-521(31) , reasoncode-522(32) , reasoncode-523(33) , reasoncode-524(34) , reasoncode-525(35) , reasoncode-526(36) , reasoncode-527(37) , reasoncode-528(38) , reasoncode-529(39) , reasoncode-530(40) , reasoncode-531(41) , reasoncode-532(42) , reasoncode-533(43) , reasoncode-534(44) , reasoncode-535(45) , reasoncode-536(46) , reasoncode-537(47) , reasoncode-538(48) , reasoncode-539(49) , reasoncode-540(50) , reasoncode-541(51) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reason code Index. The Numbers at the values are as in the RFC." ::= {acPMMGCPFailedMDCXResponsesEntry 1} acPMMGCPFailedMDCXResponsesInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPFailedMDCXResponsesEntry 2} acPMMGCPFailedMDCXResponsesVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPFailedMDCXResponsesEntry 3} -- **************************************** -- acPMMGCPGeneratedDLCXPerReasonCode table declaration -- **************************************** acPMMGCPGeneratedDLCXPerReasonCodeTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMGCPGeneratedDLCXPerReasonCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of gateway-generated DLCX commands per reason code. when you choose 0 its 900(ENDPOINT_MALFUNCTIONING) and so on." ::= {acPMMGCP 12} -- **************************************** -- acPMMGCPGeneratedDLCXPerReasonCode table entry -- **************************************** acPMMGCPGeneratedDLCXPerReasonCodeEntry OBJECT-TYPE SYNTAX AcPMMGCPGeneratedDLCXPerReasonCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMGCPGeneratedDLCXPerReasonCodeReasonCode,acPMMGCPGeneratedDLCXPerReasonCodeInterval} ::= {acPMMGCPGeneratedDLCXPerReasonCodeTable 1} -- **************************************** -- acPMMGCPGeneratedDLCXPerReasonCode TABLE -- **************************************** AcPMMGCPGeneratedDLCXPerReasonCodeEntry ::= SEQUENCE { acPMMGCPGeneratedDLCXPerReasonCodeReasonCode INTEGER, acPMMGCPGeneratedDLCXPerReasonCodeInterval Unsigned32, acPMMGCPGeneratedDLCXPerReasonCodeVal Counter32 } acPMMGCPGeneratedDLCXPerReasonCodeReasonCode OBJECT-TYPE SYNTAX INTEGER { eNDPOINT-MALFUNCTIONING-900(0) , eNDPOINT-TAKEN-OUT-OF-SERVICE-901(1) , lOSS-OF-LOWER-LAYER-CONNECTIVITY-902(2) , qOS-RESOURCE-RESERVATION-WAS-LOST-903(3) , mANUAL-INTERVENTION-904(4) , fACILITY-FAILURE-905(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reason code Index. The Numbers at the values are as in the RFC." ::= {acPMMGCPGeneratedDLCXPerReasonCodeEntry 1} acPMMGCPGeneratedDLCXPerReasonCodeInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMGCPGeneratedDLCXPerReasonCodeEntry 2} acPMMGCPGeneratedDLCXPerReasonCodeVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMGCPGeneratedDLCXPerReasonCodeEntry 3} acPMSIP OBJECT IDENTIFIER ::= {acPMControlData 52} -- **************************************** -- acPMSIPAttemptedCalls table declaration -- **************************************** acPMSIPAttemptedCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPAttemptedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of attempted calls (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 1} -- **************************************** -- acPMSIPAttemptedCalls table entry -- **************************************** acPMSIPAttemptedCallsEntry OBJECT-TYPE SYNTAX AcPMSIPAttemptedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPAttemptedCallsDirection,acPMSIPAttemptedCallsInterval} ::= {acPMSIPAttemptedCallsTable 1} -- **************************************** -- acPMSIPAttemptedCalls TABLE -- **************************************** AcPMSIPAttemptedCallsEntry ::= SEQUENCE { acPMSIPAttemptedCallsDirection INTEGER, acPMSIPAttemptedCallsInterval Unsigned32, acPMSIPAttemptedCallsVal Counter32 } acPMSIPAttemptedCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPAttemptedCallsEntry 1} acPMSIPAttemptedCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPAttemptedCallsEntry 2} acPMSIPAttemptedCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPAttemptedCallsEntry 3} -- **************************************** -- acPMSIPCallDuration table declaration -- **************************************** acPMSIPCallDurationTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPCallDurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Call Duration (Index 0 for Tel2IP and Index 1 for IP2Tel);The Total preprty gives the sum of all calls duration, while the Value property is for the last call only" ::= {acPMSIP 2} -- **************************************** -- acPMSIPCallDuration table entry -- **************************************** acPMSIPCallDurationEntry OBJECT-TYPE SYNTAX AcPMSIPCallDurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPCallDurationDirection,acPMSIPCallDurationInterval} ::= {acPMSIPCallDurationTable 1} -- **************************************** -- acPMSIPCallDuration TABLE -- **************************************** AcPMSIPCallDurationEntry ::= SEQUENCE { acPMSIPCallDurationDirection INTEGER, acPMSIPCallDurationInterval Unsigned32, acPMSIPCallDurationVal Gauge32, acPMSIPCallDurationAverage Integer32, acPMSIPCallDurationMax Integer32, acPMSIPCallDurationMin Integer32, acPMSIPCallDurationVolume Counter32, acPMSIPCallDurationTimeBelowLowThreshold Integer32, acPMSIPCallDurationTimeBetweenThresholds Integer32, acPMSIPCallDurationTimeAboveHighThreshold Integer32, acPMSIPCallDurationFullDayAverage Integer32, acPMSIPCallDurationTotal Integer32 } acPMSIPCallDurationDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPCallDurationEntry 1} acPMSIPCallDurationInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPCallDurationEntry 2} acPMSIPCallDurationVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPCallDurationEntry 3} acPMSIPCallDurationAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMSIPCallDurationEntry 4} acPMSIPCallDurationMax OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMSIPCallDurationEntry 5} acPMSIPCallDurationMin OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMSIPCallDurationEntry 6} acPMSIPCallDurationVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMSIPCallDurationEntry 7} acPMSIPCallDurationTimeBelowLowThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is below what was determined as the low threshold." ::= {acPMSIPCallDurationEntry 8} acPMSIPCallDurationTimeBetweenThresholds OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is above what was determined as the high threshold." ::= {acPMSIPCallDurationEntry 9} acPMSIPCallDurationTimeAboveHighThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMSIPCallDurationEntry 10} acPMSIPCallDurationFullDayAverage OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The average of full 24 hours." ::= {acPMSIPCallDurationEntry 11} acPMSIPCallDurationTotal OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total since last reset." ::= {acPMSIPCallDurationEntry 12} -- **************************************** -- acPMSIPNoMatchCalls table declaration -- **************************************** acPMSIPNoMatchCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPNoMatchCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of no match calls (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 3} -- **************************************** -- acPMSIPNoMatchCalls table entry -- **************************************** acPMSIPNoMatchCallsEntry OBJECT-TYPE SYNTAX AcPMSIPNoMatchCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPNoMatchCallsDirection,acPMSIPNoMatchCallsInterval} ::= {acPMSIPNoMatchCallsTable 1} -- **************************************** -- acPMSIPNoMatchCalls TABLE -- **************************************** AcPMSIPNoMatchCallsEntry ::= SEQUENCE { acPMSIPNoMatchCallsDirection INTEGER, acPMSIPNoMatchCallsInterval Unsigned32, acPMSIPNoMatchCallsVal Counter32 } acPMSIPNoMatchCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPNoMatchCallsEntry 1} acPMSIPNoMatchCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPNoMatchCallsEntry 2} acPMSIPNoMatchCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPNoMatchCallsEntry 3} -- **************************************** -- acPMSIPBusyCalls table declaration -- **************************************** acPMSIPBusyCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPBusyCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of busy calls (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 4} -- **************************************** -- acPMSIPBusyCalls table entry -- **************************************** acPMSIPBusyCallsEntry OBJECT-TYPE SYNTAX AcPMSIPBusyCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPBusyCallsDirection,acPMSIPBusyCallsInterval} ::= {acPMSIPBusyCallsTable 1} -- **************************************** -- acPMSIPBusyCalls TABLE -- **************************************** AcPMSIPBusyCallsEntry ::= SEQUENCE { acPMSIPBusyCallsDirection INTEGER, acPMSIPBusyCallsInterval Unsigned32, acPMSIPBusyCallsVal Counter32 } acPMSIPBusyCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPBusyCallsEntry 1} acPMSIPBusyCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPBusyCallsEntry 2} acPMSIPBusyCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPBusyCallsEntry 3} -- **************************************** -- acPMSIPNoAnswerCalls table declaration -- **************************************** acPMSIPNoAnswerCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPNoAnswerCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of no answer calls (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 5} -- **************************************** -- acPMSIPNoAnswerCalls table entry -- **************************************** acPMSIPNoAnswerCallsEntry OBJECT-TYPE SYNTAX AcPMSIPNoAnswerCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPNoAnswerCallsDirection,acPMSIPNoAnswerCallsInterval} ::= {acPMSIPNoAnswerCallsTable 1} -- **************************************** -- acPMSIPNoAnswerCalls TABLE -- **************************************** AcPMSIPNoAnswerCallsEntry ::= SEQUENCE { acPMSIPNoAnswerCallsDirection INTEGER, acPMSIPNoAnswerCallsInterval Unsigned32, acPMSIPNoAnswerCallsVal Counter32 } acPMSIPNoAnswerCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPNoAnswerCallsEntry 1} acPMSIPNoAnswerCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPNoAnswerCallsEntry 2} acPMSIPNoAnswerCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPNoAnswerCallsEntry 3} -- **************************************** -- acPMSIPNoRouteCalls table declaration -- **************************************** acPMSIPNoRouteCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPNoRouteCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of no route calls (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 6} -- **************************************** -- acPMSIPNoRouteCalls table entry -- **************************************** acPMSIPNoRouteCallsEntry OBJECT-TYPE SYNTAX AcPMSIPNoRouteCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPNoRouteCallsDirection,acPMSIPNoRouteCallsInterval} ::= {acPMSIPNoRouteCallsTable 1} -- **************************************** -- acPMSIPNoRouteCalls TABLE -- **************************************** AcPMSIPNoRouteCallsEntry ::= SEQUENCE { acPMSIPNoRouteCallsDirection INTEGER, acPMSIPNoRouteCallsInterval Unsigned32, acPMSIPNoRouteCallsVal Counter32 } acPMSIPNoRouteCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPNoRouteCallsEntry 1} acPMSIPNoRouteCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPNoRouteCallsEntry 2} acPMSIPNoRouteCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPNoRouteCallsEntry 3} -- **************************************** -- acPMSIPFailCalls table declaration -- **************************************** acPMSIPFailCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPFailCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of calls that failed because of other reasons (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 7} -- **************************************** -- acPMSIPFailCalls table entry -- **************************************** acPMSIPFailCallsEntry OBJECT-TYPE SYNTAX AcPMSIPFailCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPFailCallsDirection,acPMSIPFailCallsInterval} ::= {acPMSIPFailCallsTable 1} -- **************************************** -- acPMSIPFailCalls TABLE -- **************************************** AcPMSIPFailCallsEntry ::= SEQUENCE { acPMSIPFailCallsDirection INTEGER, acPMSIPFailCallsInterval Unsigned32, acPMSIPFailCallsVal Counter32 } acPMSIPFailCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPFailCallsEntry 1} acPMSIPFailCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPFailCallsEntry 2} acPMSIPFailCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPFailCallsEntry 3} -- **************************************** -- acPMSIPEstablishedCalls table declaration -- **************************************** acPMSIPEstablishedCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of established calls (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 8} -- **************************************** -- acPMSIPEstablishedCalls table entry -- **************************************** acPMSIPEstablishedCallsEntry OBJECT-TYPE SYNTAX AcPMSIPEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPEstablishedCallsDirection,acPMSIPEstablishedCallsInterval} ::= {acPMSIPEstablishedCallsTable 1} -- **************************************** -- acPMSIPEstablishedCalls TABLE -- **************************************** AcPMSIPEstablishedCallsEntry ::= SEQUENCE { acPMSIPEstablishedCallsDirection INTEGER, acPMSIPEstablishedCallsInterval Unsigned32, acPMSIPEstablishedCallsVal Counter32 } acPMSIPEstablishedCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPEstablishedCallsEntry 1} acPMSIPEstablishedCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPEstablishedCallsEntry 2} acPMSIPEstablishedCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPEstablishedCallsEntry 3} -- **************************************** -- acPMSIPFaxAttemptedCalls table declaration -- **************************************** acPMSIPFaxAttemptedCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPFaxAttemptedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of attempted fax calls (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 9} -- **************************************** -- acPMSIPFaxAttemptedCalls table entry -- **************************************** acPMSIPFaxAttemptedCallsEntry OBJECT-TYPE SYNTAX AcPMSIPFaxAttemptedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPFaxAttemptedCallsDirection,acPMSIPFaxAttemptedCallsInterval} ::= {acPMSIPFaxAttemptedCallsTable 1} -- **************************************** -- acPMSIPFaxAttemptedCalls TABLE -- **************************************** AcPMSIPFaxAttemptedCallsEntry ::= SEQUENCE { acPMSIPFaxAttemptedCallsDirection INTEGER, acPMSIPFaxAttemptedCallsInterval Unsigned32, acPMSIPFaxAttemptedCallsVal Counter32 } acPMSIPFaxAttemptedCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPFaxAttemptedCallsEntry 1} acPMSIPFaxAttemptedCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPFaxAttemptedCallsEntry 2} acPMSIPFaxAttemptedCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPFaxAttemptedCallsEntry 3} -- **************************************** -- acPMSIPFaxSuccessCalls table declaration -- **************************************** acPMSIPFaxSuccessCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPFaxSuccessCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of success fax calls (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 10} -- **************************************** -- acPMSIPFaxSuccessCalls table entry -- **************************************** acPMSIPFaxSuccessCallsEntry OBJECT-TYPE SYNTAX AcPMSIPFaxSuccessCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPFaxSuccessCallsDirection,acPMSIPFaxSuccessCallsInterval} ::= {acPMSIPFaxSuccessCallsTable 1} -- **************************************** -- acPMSIPFaxSuccessCalls TABLE -- **************************************** AcPMSIPFaxSuccessCallsEntry ::= SEQUENCE { acPMSIPFaxSuccessCallsDirection INTEGER, acPMSIPFaxSuccessCallsInterval Unsigned32, acPMSIPFaxSuccessCallsVal Counter32 } acPMSIPFaxSuccessCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPFaxSuccessCallsEntry 1} acPMSIPFaxSuccessCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPFaxSuccessCallsEntry 2} acPMSIPFaxSuccessCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPFaxSuccessCallsEntry 3} -- **************************************** -- acPMSIPForwardedCalls table declaration -- **************************************** acPMSIPForwardedCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPForwardedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of calls released due to forwarding (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 11} -- **************************************** -- acPMSIPForwardedCalls table entry -- **************************************** acPMSIPForwardedCallsEntry OBJECT-TYPE SYNTAX AcPMSIPForwardedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPForwardedCallsDirection,acPMSIPForwardedCallsInterval} ::= {acPMSIPForwardedCallsTable 1} -- **************************************** -- acPMSIPForwardedCalls TABLE -- **************************************** AcPMSIPForwardedCallsEntry ::= SEQUENCE { acPMSIPForwardedCallsDirection INTEGER, acPMSIPForwardedCallsInterval Unsigned32, acPMSIPForwardedCallsVal Counter32 } acPMSIPForwardedCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPForwardedCallsEntry 1} acPMSIPForwardedCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPForwardedCallsEntry 2} acPMSIPForwardedCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPForwardedCallsEntry 3} -- **************************************** -- acPMSIPNoResourcesCalls table declaration -- **************************************** acPMSIPNoResourcesCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPNoResourcesCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of calls released because of no resources (Index 0 for TEL2IP and Index 1 for IP2TEL)" ::= {acPMSIP 12} -- **************************************** -- acPMSIPNoResourcesCalls table entry -- **************************************** acPMSIPNoResourcesCallsEntry OBJECT-TYPE SYNTAX AcPMSIPNoResourcesCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPNoResourcesCallsDirection,acPMSIPNoResourcesCallsInterval} ::= {acPMSIPNoResourcesCallsTable 1} -- **************************************** -- acPMSIPNoResourcesCalls TABLE -- **************************************** AcPMSIPNoResourcesCallsEntry ::= SEQUENCE { acPMSIPNoResourcesCallsDirection INTEGER, acPMSIPNoResourcesCallsInterval Unsigned32, acPMSIPNoResourcesCallsVal Counter32 } acPMSIPNoResourcesCallsDirection OBJECT-TYPE SYNTAX INTEGER { tel2IP(0) , iP2Tel(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction index - TEL2IP(0), IP2TEL(1)." ::= {acPMSIPNoResourcesCallsEntry 1} acPMSIPNoResourcesCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPNoResourcesCallsEntry 2} acPMSIPNoResourcesCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPNoResourcesCallsEntry 3} -- **************************************** -- acPMSIPTel2IPTrunkEstablishedCalls table declaration -- **************************************** acPMSIPTel2IPTrunkEstablishedCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPTel2IPTrunkEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of Tel2IP established calls per trunk." ::= {acPMSIP 13} -- **************************************** -- acPMSIPTel2IPTrunkEstablishedCalls table entry -- **************************************** acPMSIPTel2IPTrunkEstablishedCallsEntry OBJECT-TYPE SYNTAX AcPMSIPTel2IPTrunkEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPTel2IPTrunkEstablishedCallsTrunkNum,acPMSIPTel2IPTrunkEstablishedCallsInterval} ::= {acPMSIPTel2IPTrunkEstablishedCallsTable 1} -- **************************************** -- acPMSIPTel2IPTrunkEstablishedCalls TABLE -- **************************************** AcPMSIPTel2IPTrunkEstablishedCallsEntry ::= SEQUENCE { acPMSIPTel2IPTrunkEstablishedCallsTrunkNum Unsigned32, acPMSIPTel2IPTrunkEstablishedCallsInterval Unsigned32, acPMSIPTel2IPTrunkEstablishedCallsVal Counter32 } acPMSIPTel2IPTrunkEstablishedCallsTrunkNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk number. 0 is the first trunk." ::= {acPMSIPTel2IPTrunkEstablishedCallsEntry 1} acPMSIPTel2IPTrunkEstablishedCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPTel2IPTrunkEstablishedCallsEntry 2} acPMSIPTel2IPTrunkEstablishedCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPTel2IPTrunkEstablishedCallsEntry 3} -- **************************************** -- acPMSIPIP2TelTrunkEstablishedCalls table declaration -- **************************************** acPMSIPIP2TelTrunkEstablishedCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPIP2TelTrunkEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of IP2Tel established calls per trunk." ::= {acPMSIP 14} -- **************************************** -- acPMSIPIP2TelTrunkEstablishedCalls table entry -- **************************************** acPMSIPIP2TelTrunkEstablishedCallsEntry OBJECT-TYPE SYNTAX AcPMSIPIP2TelTrunkEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPIP2TelTrunkEstablishedCallsTrunkNum,acPMSIPIP2TelTrunkEstablishedCallsInterval} ::= {acPMSIPIP2TelTrunkEstablishedCallsTable 1} -- **************************************** -- acPMSIPIP2TelTrunkEstablishedCalls TABLE -- **************************************** AcPMSIPIP2TelTrunkEstablishedCallsEntry ::= SEQUENCE { acPMSIPIP2TelTrunkEstablishedCallsTrunkNum Unsigned32, acPMSIPIP2TelTrunkEstablishedCallsInterval Unsigned32, acPMSIPIP2TelTrunkEstablishedCallsVal Counter32 } acPMSIPIP2TelTrunkEstablishedCallsTrunkNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk number. 0 is the first trunk." ::= {acPMSIPIP2TelTrunkEstablishedCallsEntry 1} acPMSIPIP2TelTrunkEstablishedCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPIP2TelTrunkEstablishedCallsEntry 2} acPMSIPIP2TelTrunkEstablishedCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPIP2TelTrunkEstablishedCallsEntry 3} -- **************************************** -- acPMSIPTel2IPTrunkGroupEstablishedCalls table declaration -- **************************************** acPMSIPTel2IPTrunkGroupEstablishedCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPTel2IPTrunkGroupEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of Tel2IP established calls per trunk group." ::= {acPMSIP 15} -- **************************************** -- acPMSIPTel2IPTrunkGroupEstablishedCalls table entry -- **************************************** acPMSIPTel2IPTrunkGroupEstablishedCallsEntry OBJECT-TYPE SYNTAX AcPMSIPTel2IPTrunkGroupEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPTel2IPTrunkGroupEstablishedCallsGroupNum,acPMSIPTel2IPTrunkGroupEstablishedCallsInterval} ::= {acPMSIPTel2IPTrunkGroupEstablishedCallsTable 1} -- **************************************** -- acPMSIPTel2IPTrunkGroupEstablishedCalls TABLE -- **************************************** AcPMSIPTel2IPTrunkGroupEstablishedCallsEntry ::= SEQUENCE { acPMSIPTel2IPTrunkGroupEstablishedCallsGroupNum Unsigned32, acPMSIPTel2IPTrunkGroupEstablishedCallsInterval Unsigned32, acPMSIPTel2IPTrunkGroupEstablishedCallsVal Counter32 } acPMSIPTel2IPTrunkGroupEstablishedCallsGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group number. 0 is the first trunk group." ::= {acPMSIPTel2IPTrunkGroupEstablishedCallsEntry 1} acPMSIPTel2IPTrunkGroupEstablishedCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPTel2IPTrunkGroupEstablishedCallsEntry 2} acPMSIPTel2IPTrunkGroupEstablishedCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPTel2IPTrunkGroupEstablishedCallsEntry 3} -- **************************************** -- acPMSIPIP2TelTrunkGroupEstablishedCalls table declaration -- **************************************** acPMSIPIP2TelTrunkGroupEstablishedCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPIP2TelTrunkGroupEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of IP2Tel established calls per trunk group." ::= {acPMSIP 16} -- **************************************** -- acPMSIPIP2TelTrunkGroupEstablishedCalls table entry -- **************************************** acPMSIPIP2TelTrunkGroupEstablishedCallsEntry OBJECT-TYPE SYNTAX AcPMSIPIP2TelTrunkGroupEstablishedCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPIP2TelTrunkGroupEstablishedCallsGroupNum,acPMSIPIP2TelTrunkGroupEstablishedCallsInterval} ::= {acPMSIPIP2TelTrunkGroupEstablishedCallsTable 1} -- **************************************** -- acPMSIPIP2TelTrunkGroupEstablishedCalls TABLE -- **************************************** AcPMSIPIP2TelTrunkGroupEstablishedCallsEntry ::= SEQUENCE { acPMSIPIP2TelTrunkGroupEstablishedCallsGroupNum Unsigned32, acPMSIPIP2TelTrunkGroupEstablishedCallsInterval Unsigned32, acPMSIPIP2TelTrunkGroupEstablishedCallsVal Counter32 } acPMSIPIP2TelTrunkGroupEstablishedCallsGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group number. 0 is the first trunk group." ::= {acPMSIPIP2TelTrunkGroupEstablishedCallsEntry 1} acPMSIPIP2TelTrunkGroupEstablishedCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPIP2TelTrunkGroupEstablishedCallsEntry 2} acPMSIPIP2TelTrunkGroupEstablishedCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPIP2TelTrunkGroupEstablishedCallsEntry 3} -- **************************************** -- acPMSIPSRDDialogs table declaration -- **************************************** acPMSIPSRDDialogsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPSRDDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwSRDDialogs setup" ::= {acPMSIP 17} -- **************************************** -- acPMSIPSRDDialogs table entry -- **************************************** acPMSIPSRDDialogsEntry OBJECT-TYPE SYNTAX AcPMSIPSRDDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPSRDDialogsSrdNum,acPMSIPSRDDialogsInterval} ::= {acPMSIPSRDDialogsTable 1} -- **************************************** -- acPMSIPSRDDialogs TABLE -- **************************************** AcPMSIPSRDDialogsEntry ::= SEQUENCE { acPMSIPSRDDialogsSrdNum Unsigned32, acPMSIPSRDDialogsInterval Unsigned32, acPMSIPSRDDialogsVal Counter32 } acPMSIPSRDDialogsSrdNum OBJECT-TYPE SYNTAX Unsigned32 (0..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "SRD number. 0 is the first SRD." ::= {acPMSIPSRDDialogsEntry 1} acPMSIPSRDDialogsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPSRDDialogsEntry 2} acPMSIPSRDDialogsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPSRDDialogsEntry 3} -- **************************************** -- acPMSIPSRDInviteDialogs table declaration -- **************************************** acPMSIPSRDInviteDialogsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPSRDInviteDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwSRDSUBSCRIBEDialogs setup" ::= {acPMSIP 18} -- **************************************** -- acPMSIPSRDInviteDialogs table entry -- **************************************** acPMSIPSRDInviteDialogsEntry OBJECT-TYPE SYNTAX AcPMSIPSRDInviteDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPSRDInviteDialogsSrdNum,acPMSIPSRDInviteDialogsInterval} ::= {acPMSIPSRDInviteDialogsTable 1} -- **************************************** -- acPMSIPSRDInviteDialogs TABLE -- **************************************** AcPMSIPSRDInviteDialogsEntry ::= SEQUENCE { acPMSIPSRDInviteDialogsSrdNum Unsigned32, acPMSIPSRDInviteDialogsInterval Unsigned32, acPMSIPSRDInviteDialogsVal Counter32 } acPMSIPSRDInviteDialogsSrdNum OBJECT-TYPE SYNTAX Unsigned32 (0..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "SRD number. 0 is the first SRD." ::= {acPMSIPSRDInviteDialogsEntry 1} acPMSIPSRDInviteDialogsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPSRDInviteDialogsEntry 2} acPMSIPSRDInviteDialogsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPSRDInviteDialogsEntry 3} -- **************************************** -- acPMSIPSRDSubscribeDialogs table declaration -- **************************************** acPMSIPSRDSubscribeDialogsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPSRDSubscribeDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwSRDSUBSCRIBEDialogs setup" ::= {acPMSIP 19} -- **************************************** -- acPMSIPSRDSubscribeDialogs table entry -- **************************************** acPMSIPSRDSubscribeDialogsEntry OBJECT-TYPE SYNTAX AcPMSIPSRDSubscribeDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPSRDSubscribeDialogsSrdNum,acPMSIPSRDSubscribeDialogsInterval} ::= {acPMSIPSRDSubscribeDialogsTable 1} -- **************************************** -- acPMSIPSRDSubscribeDialogs TABLE -- **************************************** AcPMSIPSRDSubscribeDialogsEntry ::= SEQUENCE { acPMSIPSRDSubscribeDialogsSrdNum Unsigned32, acPMSIPSRDSubscribeDialogsInterval Unsigned32, acPMSIPSRDSubscribeDialogsVal Counter32 } acPMSIPSRDSubscribeDialogsSrdNum OBJECT-TYPE SYNTAX Unsigned32 (0..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "SRD number. 0 is the first SRD." ::= {acPMSIPSRDSubscribeDialogsEntry 1} acPMSIPSRDSubscribeDialogsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPSRDSubscribeDialogsEntry 2} acPMSIPSRDSubscribeDialogsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPSRDSubscribeDialogsEntry 3} -- **************************************** -- acPMSIPSRDOtherDialogs table declaration -- **************************************** acPMSIPSRDOtherDialogsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPSRDOtherDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwSRDOtherDialogs setup" ::= {acPMSIP 20} -- **************************************** -- acPMSIPSRDOtherDialogs table entry -- **************************************** acPMSIPSRDOtherDialogsEntry OBJECT-TYPE SYNTAX AcPMSIPSRDOtherDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPSRDOtherDialogsSrdNum,acPMSIPSRDOtherDialogsInterval} ::= {acPMSIPSRDOtherDialogsTable 1} -- **************************************** -- acPMSIPSRDOtherDialogs TABLE -- **************************************** AcPMSIPSRDOtherDialogsEntry ::= SEQUENCE { acPMSIPSRDOtherDialogsSrdNum Unsigned32, acPMSIPSRDOtherDialogsInterval Unsigned32, acPMSIPSRDOtherDialogsVal Counter32 } acPMSIPSRDOtherDialogsSrdNum OBJECT-TYPE SYNTAX Unsigned32 (0..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "SRD number. 0 is the first SRD." ::= {acPMSIPSRDOtherDialogsEntry 1} acPMSIPSRDOtherDialogsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPSRDOtherDialogsEntry 2} acPMSIPSRDOtherDialogsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPSRDOtherDialogsEntry 3} -- **************************************** -- acPMSIPIPGroupDialogs table declaration -- **************************************** acPMSIPIPGroupDialogsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPIPGroupDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwIPGroupDialogs setup" ::= {acPMSIP 21} -- **************************************** -- acPMSIPIPGroupDialogs table entry -- **************************************** acPMSIPIPGroupDialogsEntry OBJECT-TYPE SYNTAX AcPMSIPIPGroupDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPIPGroupDialogsIPGroupNum,acPMSIPIPGroupDialogsInterval} ::= {acPMSIPIPGroupDialogsTable 1} -- **************************************** -- acPMSIPIPGroupDialogs TABLE -- **************************************** AcPMSIPIPGroupDialogsEntry ::= SEQUENCE { acPMSIPIPGroupDialogsIPGroupNum Unsigned32, acPMSIPIPGroupDialogsInterval Unsigned32, acPMSIPIPGroupDialogsVal Counter32 } acPMSIPIPGroupDialogsIPGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..33) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Group number. 0 is the first IP Group." ::= {acPMSIPIPGroupDialogsEntry 1} acPMSIPIPGroupDialogsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPIPGroupDialogsEntry 2} acPMSIPIPGroupDialogsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPIPGroupDialogsEntry 3} -- **************************************** -- acPMSIPIPGroupInviteDialogs table declaration -- **************************************** acPMSIPIPGroupInviteDialogsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPIPGroupInviteDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwIPGroupINVITEDialogs setup" ::= {acPMSIP 22} -- **************************************** -- acPMSIPIPGroupInviteDialogs table entry -- **************************************** acPMSIPIPGroupInviteDialogsEntry OBJECT-TYPE SYNTAX AcPMSIPIPGroupInviteDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPIPGroupInviteDialogsIPGroupNum,acPMSIPIPGroupInviteDialogsInterval} ::= {acPMSIPIPGroupInviteDialogsTable 1} -- **************************************** -- acPMSIPIPGroupInviteDialogs TABLE -- **************************************** AcPMSIPIPGroupInviteDialogsEntry ::= SEQUENCE { acPMSIPIPGroupInviteDialogsIPGroupNum Unsigned32, acPMSIPIPGroupInviteDialogsInterval Unsigned32, acPMSIPIPGroupInviteDialogsVal Counter32, acPMSIPIPGroupInviteDialogsAverage Unsigned32, acPMSIPIPGroupInviteDialogsMax Unsigned32, acPMSIPIPGroupInviteDialogsMin Unsigned32, acPMSIPIPGroupInviteDialogsTimeBelowLowThreshold Unsigned32, acPMSIPIPGroupInviteDialogsTimeBetweenThresholds Unsigned32, acPMSIPIPGroupInviteDialogsTimeAboveHighThreshold Unsigned32 } acPMSIPIPGroupInviteDialogsIPGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..33) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Group number. 0 is the first IP Group." ::= {acPMSIPIPGroupInviteDialogsEntry 1} acPMSIPIPGroupInviteDialogsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPIPGroupInviteDialogsEntry 2} acPMSIPIPGroupInviteDialogsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPIPGroupInviteDialogsEntry 3} acPMSIPIPGroupInviteDialogsAverage OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMSIPIPGroupInviteDialogsEntry 4} acPMSIPIPGroupInviteDialogsMax OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMSIPIPGroupInviteDialogsEntry 5} acPMSIPIPGroupInviteDialogsMin OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMSIPIPGroupInviteDialogsEntry 6} acPMSIPIPGroupInviteDialogsTimeBelowLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Number (in seconds) of interval time for which gauge is below what was determined as the low threshold." ::= {acPMSIPIPGroupInviteDialogsEntry 7} acPMSIPIPGroupInviteDialogsTimeBetweenThresholds OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Number (in seconds) of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMSIPIPGroupInviteDialogsEntry 8} acPMSIPIPGroupInviteDialogsTimeAboveHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Number (in seconds) of interval time for which gauge is above what was determined as the high threshold." ::= {acPMSIPIPGroupInviteDialogsEntry 9} -- **************************************** -- acPMSIPIPGroupSubscribeDialogs table declaration -- **************************************** acPMSIPIPGroupSubscribeDialogsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPIPGroupSubscribeDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwIPGroupSUBSCRIBEDialogs setup" ::= {acPMSIP 23} -- **************************************** -- acPMSIPIPGroupSubscribeDialogs table entry -- **************************************** acPMSIPIPGroupSubscribeDialogsEntry OBJECT-TYPE SYNTAX AcPMSIPIPGroupSubscribeDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPIPGroupSubscribeDialogsIPGroupNum,acPMSIPIPGroupSubscribeDialogsInterval} ::= {acPMSIPIPGroupSubscribeDialogsTable 1} -- **************************************** -- acPMSIPIPGroupSubscribeDialogs TABLE -- **************************************** AcPMSIPIPGroupSubscribeDialogsEntry ::= SEQUENCE { acPMSIPIPGroupSubscribeDialogsIPGroupNum Unsigned32, acPMSIPIPGroupSubscribeDialogsInterval Unsigned32, acPMSIPIPGroupSubscribeDialogsVal Counter32 } acPMSIPIPGroupSubscribeDialogsIPGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..33) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Group number. 0 is the first IP Group." ::= {acPMSIPIPGroupSubscribeDialogsEntry 1} acPMSIPIPGroupSubscribeDialogsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPIPGroupSubscribeDialogsEntry 2} acPMSIPIPGroupSubscribeDialogsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPIPGroupSubscribeDialogsEntry 3} -- **************************************** -- acPMSIPIPGroupOtherDialogs table declaration -- **************************************** acPMSIPIPGroupOtherDialogsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPIPGroupOtherDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwIPGroupOtherDialogs setup" ::= {acPMSIP 24} -- **************************************** -- acPMSIPIPGroupOtherDialogs table entry -- **************************************** acPMSIPIPGroupOtherDialogsEntry OBJECT-TYPE SYNTAX AcPMSIPIPGroupOtherDialogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPIPGroupOtherDialogsIPGroupNum,acPMSIPIPGroupOtherDialogsInterval} ::= {acPMSIPIPGroupOtherDialogsTable 1} -- **************************************** -- acPMSIPIPGroupOtherDialogs TABLE -- **************************************** AcPMSIPIPGroupOtherDialogsEntry ::= SEQUENCE { acPMSIPIPGroupOtherDialogsIPGroupNum Unsigned32, acPMSIPIPGroupOtherDialogsInterval Unsigned32, acPMSIPIPGroupOtherDialogsVal Counter32 } acPMSIPIPGroupOtherDialogsIPGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..33) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Group number. 0 is the first IP Group." ::= {acPMSIPIPGroupOtherDialogsEntry 1} acPMSIPIPGroupOtherDialogsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPIPGroupOtherDialogsEntry 2} acPMSIPIPGroupOtherDialogsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPIPGroupOtherDialogsEntry 3} -- **************************************** -- acPMSIPTrunkGroupAllTrunksBusy table declaration -- **************************************** acPMSIPTrunkGroupAllTrunksBusyTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPTrunkGroupAllTrunksBusyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwTrunkGroupAllTrunksBusy setup" ::= {acPMSIP 25} -- **************************************** -- acPMSIPTrunkGroupAllTrunksBusy table entry -- **************************************** acPMSIPTrunkGroupAllTrunksBusyEntry OBJECT-TYPE SYNTAX AcPMSIPTrunkGroupAllTrunksBusyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPTrunkGroupAllTrunksBusyTrunkGroupNum,acPMSIPTrunkGroupAllTrunksBusyInterval} ::= {acPMSIPTrunkGroupAllTrunksBusyTable 1} -- **************************************** -- acPMSIPTrunkGroupAllTrunksBusy TABLE -- **************************************** AcPMSIPTrunkGroupAllTrunksBusyEntry ::= SEQUENCE { acPMSIPTrunkGroupAllTrunksBusyTrunkGroupNum Unsigned32, acPMSIPTrunkGroupAllTrunksBusyInterval Unsigned32, acPMSIPTrunkGroupAllTrunksBusyVal Counter32 } acPMSIPTrunkGroupAllTrunksBusyTrunkGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group number. 0 is the first Trunk Group." ::= {acPMSIPTrunkGroupAllTrunksBusyEntry 1} acPMSIPTrunkGroupAllTrunksBusyInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPTrunkGroupAllTrunksBusyEntry 2} acPMSIPTrunkGroupAllTrunksBusyVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPTrunkGroupAllTrunksBusyEntry 3} -- **************************************** -- acPMSIPTrunkGroupUtilization table declaration -- **************************************** acPMSIPTrunkGroupUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPTrunkGroupUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Processing time (in Microseconds), per command type." ::= {acPMSIP 26} -- **************************************** -- acPMSIPTrunkGroupUtilization table entry -- **************************************** acPMSIPTrunkGroupUtilizationEntry OBJECT-TYPE SYNTAX AcPMSIPTrunkGroupUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPTrunkGroupUtilizationTrunkGroupNum,acPMSIPTrunkGroupUtilizationInterval} ::= {acPMSIPTrunkGroupUtilizationTable 1} -- **************************************** -- acPMSIPTrunkGroupUtilization TABLE -- **************************************** AcPMSIPTrunkGroupUtilizationEntry ::= SEQUENCE { acPMSIPTrunkGroupUtilizationTrunkGroupNum Unsigned32, acPMSIPTrunkGroupUtilizationInterval Unsigned32, acPMSIPTrunkGroupUtilizationVal Gauge32, acPMSIPTrunkGroupUtilizationTimeBelowLowThreshold Unsigned32, acPMSIPTrunkGroupUtilizationTimeBetweenThresholds Unsigned32, acPMSIPTrunkGroupUtilizationTimeAboveHighThreshold Unsigned32, acPMSIPTrunkGroupUtilizationAverage Unsigned32, acPMSIPTrunkGroupUtilizationMax Unsigned32, acPMSIPTrunkGroupUtilizationMin Unsigned32, acPMSIPTrunkGroupUtilizationTotal Counter32, acPMSIPTrunkGroupUtilizationFullDayAverage Unsigned32 } acPMSIPTrunkGroupUtilizationTrunkGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group number. 0 is the first Trunk Group." ::= {acPMSIPTrunkGroupUtilizationEntry 1} acPMSIPTrunkGroupUtilizationInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPTrunkGroupUtilizationEntry 2} acPMSIPTrunkGroupUtilizationVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPTrunkGroupUtilizationEntry 3} acPMSIPTrunkGroupUtilizationTimeBelowLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is below what was determined as the low threshold." ::= {acPMSIPTrunkGroupUtilizationEntry 4} acPMSIPTrunkGroupUtilizationTimeBetweenThresholds OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMSIPTrunkGroupUtilizationEntry 5} acPMSIPTrunkGroupUtilizationTimeAboveHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is above what was determined as the high threshold." ::= {acPMSIPTrunkGroupUtilizationEntry 6} acPMSIPTrunkGroupUtilizationAverage OBJECT-TYPE SYNTAX Unsigned32 (0..2016) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMSIPTrunkGroupUtilizationEntry 7} acPMSIPTrunkGroupUtilizationMax OBJECT-TYPE SYNTAX Unsigned32 (0..2016) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMSIPTrunkGroupUtilizationEntry 8} acPMSIPTrunkGroupUtilizationMin OBJECT-TYPE SYNTAX Unsigned32 (0..2016) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMSIPTrunkGroupUtilizationEntry 9} acPMSIPTrunkGroupUtilizationTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMSIPTrunkGroupUtilizationEntry 10} acPMSIPTrunkGroupUtilizationFullDayAverage OBJECT-TYPE SYNTAX Unsigned32 (0..2016) MAX-ACCESS read-only STATUS current DESCRIPTION "The average of full 24 hours." ::= {acPMSIPTrunkGroupUtilizationEntry 11} -- **************************************** -- acPMSIPTrunkGroupPercentageUtilization table declaration -- **************************************** acPMSIPTrunkGroupPercentageUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPTrunkGroupPercentageUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Processing time (in Microseconds), per command type." ::= {acPMSIP 27} -- **************************************** -- acPMSIPTrunkGroupPercentageUtilization table entry -- **************************************** acPMSIPTrunkGroupPercentageUtilizationEntry OBJECT-TYPE SYNTAX AcPMSIPTrunkGroupPercentageUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPTrunkGroupPercentageUtilizationTrunkGroupNum,acPMSIPTrunkGroupPercentageUtilizationInterval} ::= {acPMSIPTrunkGroupPercentageUtilizationTable 1} -- **************************************** -- acPMSIPTrunkGroupPercentageUtilization TABLE -- **************************************** AcPMSIPTrunkGroupPercentageUtilizationEntry ::= SEQUENCE { acPMSIPTrunkGroupPercentageUtilizationTrunkGroupNum Unsigned32, acPMSIPTrunkGroupPercentageUtilizationInterval Unsigned32, acPMSIPTrunkGroupPercentageUtilizationVal Gauge32, acPMSIPTrunkGroupPercentageUtilizationTimeBelowLowThreshold Unsigned32, acPMSIPTrunkGroupPercentageUtilizationTimeBetweenThresholds Unsigned32, acPMSIPTrunkGroupPercentageUtilizationTimeAboveHighThreshold Unsigned32, acPMSIPTrunkGroupPercentageUtilizationAverage Unsigned32, acPMSIPTrunkGroupPercentageUtilizationMax Unsigned32, acPMSIPTrunkGroupPercentageUtilizationMin Unsigned32, acPMSIPTrunkGroupPercentageUtilizationFullDayAverage Unsigned32 } acPMSIPTrunkGroupPercentageUtilizationTrunkGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group number. 0 is the first Trunk Group." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 1} acPMSIPTrunkGroupPercentageUtilizationInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 2} acPMSIPTrunkGroupPercentageUtilizationVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current value of gauge in percentage." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 3} acPMSIPTrunkGroupPercentageUtilizationTimeBelowLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is below what was determined as the low threshold." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 4} acPMSIPTrunkGroupPercentageUtilizationTimeBetweenThresholds OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 5} acPMSIPTrunkGroupPercentageUtilizationTimeAboveHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is above what was determined as the high threshold." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 6} acPMSIPTrunkGroupPercentageUtilizationAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Average percentage of utilization with in the period time." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 7} acPMSIPTrunkGroupPercentageUtilizationMax OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum percentage of utilization with in the period time." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 8} acPMSIPTrunkGroupPercentageUtilizationMin OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum percentage of utilization with in the period time." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 9} acPMSIPTrunkGroupPercentageUtilizationFullDayAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The average percentage of utilization with in the past 24 hours." ::= {acPMSIPTrunkGroupPercentageUtilizationEntry 10} -- **************************************** -- acPMSIPTrunkGroupNoResourcesCalls table declaration -- **************************************** acPMSIPTrunkGroupNoResourcesCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPTrunkGroupNoResourcesCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of calls released because of no resources (Index for the Trunk Group ID)" ::= {acPMSIP 28} -- **************************************** -- acPMSIPTrunkGroupNoResourcesCalls table entry -- **************************************** acPMSIPTrunkGroupNoResourcesCallsEntry OBJECT-TYPE SYNTAX AcPMSIPTrunkGroupNoResourcesCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPTrunkGroupNoResourcesCallsTrunkGroupNum,acPMSIPTrunkGroupNoResourcesCallsInterval} ::= {acPMSIPTrunkGroupNoResourcesCallsTable 1} -- **************************************** -- acPMSIPTrunkGroupNoResourcesCalls TABLE -- **************************************** AcPMSIPTrunkGroupNoResourcesCallsEntry ::= SEQUENCE { acPMSIPTrunkGroupNoResourcesCallsTrunkGroupNum Unsigned32, acPMSIPTrunkGroupNoResourcesCallsInterval Unsigned32, acPMSIPTrunkGroupNoResourcesCallsVal Counter32, acPMSIPTrunkGroupNoResourcesCallsTotal Counter32 } acPMSIPTrunkGroupNoResourcesCallsTrunkGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group number. 0 is the first Trunk Group." ::= {acPMSIPTrunkGroupNoResourcesCallsEntry 1} acPMSIPTrunkGroupNoResourcesCallsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPTrunkGroupNoResourcesCallsEntry 2} acPMSIPTrunkGroupNoResourcesCallsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPTrunkGroupNoResourcesCallsEntry 3} acPMSIPTrunkGroupNoResourcesCallsTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMSIPTrunkGroupNoResourcesCallsEntry 4} -- **************************************** -- acPMSIPTrunkGroupCallDuration table declaration -- **************************************** acPMSIPTrunkGroupCallDurationTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPTrunkGroupCallDurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Call Duration of Trunk Group" ::= {acPMSIP 29} -- **************************************** -- acPMSIPTrunkGroupCallDuration table entry -- **************************************** acPMSIPTrunkGroupCallDurationEntry OBJECT-TYPE SYNTAX AcPMSIPTrunkGroupCallDurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPTrunkGroupCallDurationTrunkGroupNum,acPMSIPTrunkGroupCallDurationInterval} ::= {acPMSIPTrunkGroupCallDurationTable 1} -- **************************************** -- acPMSIPTrunkGroupCallDuration TABLE -- **************************************** AcPMSIPTrunkGroupCallDurationEntry ::= SEQUENCE { acPMSIPTrunkGroupCallDurationTrunkGroupNum Unsigned32, acPMSIPTrunkGroupCallDurationInterval Unsigned32, acPMSIPTrunkGroupCallDurationVal Gauge32, acPMSIPTrunkGroupCallDurationAverage Unsigned32, acPMSIPTrunkGroupCallDurationMax Unsigned32, acPMSIPTrunkGroupCallDurationMin Unsigned32, acPMSIPTrunkGroupCallDurationTotal Counter32, acPMSIPTrunkGroupCallDurationFullDayAverage Unsigned32 } acPMSIPTrunkGroupCallDurationTrunkGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group number. 0 is the first Trunk Group." ::= {acPMSIPTrunkGroupCallDurationEntry 1} acPMSIPTrunkGroupCallDurationInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPTrunkGroupCallDurationEntry 2} acPMSIPTrunkGroupCallDurationVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMSIPTrunkGroupCallDurationEntry 3} acPMSIPTrunkGroupCallDurationAverage OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMSIPTrunkGroupCallDurationEntry 4} acPMSIPTrunkGroupCallDurationMax OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMSIPTrunkGroupCallDurationEntry 5} acPMSIPTrunkGroupCallDurationMin OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMSIPTrunkGroupCallDurationEntry 6} acPMSIPTrunkGroupCallDurationTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum duration of all calls of Trunk Group." ::= {acPMSIPTrunkGroupCallDurationEntry 7} acPMSIPTrunkGroupCallDurationFullDayAverage OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The average of full 24 hours." ::= {acPMSIPTrunkGroupCallDurationEntry 8} -- **************************************** -- acPMSIPTrunkGroupAllTrunksBusyPercentage table declaration -- **************************************** acPMSIPTrunkGroupAllTrunksBusyPercentageTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMSIPTrunkGroupAllTrunksBusyPercentageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring gwTrunkGroupAllTrunksBusyPercentage setup" ::= {acPMSIP 40} -- **************************************** -- acPMSIPTrunkGroupAllTrunksBusyPercentage table entry -- **************************************** acPMSIPTrunkGroupAllTrunksBusyPercentageEntry OBJECT-TYPE SYNTAX AcPMSIPTrunkGroupAllTrunksBusyPercentageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMSIPTrunkGroupAllTrunksBusyPercentageTrunkGroupNum,acPMSIPTrunkGroupAllTrunksBusyPercentageInterval} ::= {acPMSIPTrunkGroupAllTrunksBusyPercentageTable 1} -- **************************************** -- acPMSIPTrunkGroupAllTrunksBusyPercentage TABLE -- **************************************** AcPMSIPTrunkGroupAllTrunksBusyPercentageEntry ::= SEQUENCE { acPMSIPTrunkGroupAllTrunksBusyPercentageTrunkGroupNum Unsigned32, acPMSIPTrunkGroupAllTrunksBusyPercentageInterval Unsigned32, acPMSIPTrunkGroupAllTrunksBusyPercentageVal Gauge32 } acPMSIPTrunkGroupAllTrunksBusyPercentageTrunkGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group number. 0 is the first Trunk Group." ::= {acPMSIPTrunkGroupAllTrunksBusyPercentageEntry 1} acPMSIPTrunkGroupAllTrunksBusyPercentageInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMSIPTrunkGroupAllTrunksBusyPercentageEntry 2} acPMSIPTrunkGroupAllTrunksBusyPercentageVal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the percentage of the previous interval (15-minute) for which all the trunks were busy. Note: value of current interval (acPMSIPTrunkGroupAllTrunksBusyPercentageInterval = 0) is always equal to value of the previous interval." ::= {acPMSIPTrunkGroupAllTrunksBusyPercentageEntry 3} acPMMediaRealm OBJECT IDENTIFIER ::= {acPMControlData 53} -- **************************************** -- acPMMediaRealmBytesTx table declaration -- **************************************** acPMMediaRealmBytesTxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmBytesTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring MediaRealmBytesTx" ::= {acPMMediaRealm 1} -- **************************************** -- acPMMediaRealmBytesTx table entry -- **************************************** acPMMediaRealmBytesTxEntry OBJECT-TYPE SYNTAX AcPMMediaRealmBytesTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmBytesTxMediaRealmNum,acPMMediaRealmBytesTxInterval} ::= {acPMMediaRealmBytesTxTable 1} -- **************************************** -- acPMMediaRealmBytesTx TABLE -- **************************************** AcPMMediaRealmBytesTxEntry ::= SEQUENCE { acPMMediaRealmBytesTxMediaRealmNum Unsigned32, acPMMediaRealmBytesTxInterval Unsigned32, acPMMediaRealmBytesTxVal Counter32, acPMMediaRealmBytesTxVolume Counter32 } acPMMediaRealmBytesTxMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmBytesTxEntry 1} acPMMediaRealmBytesTxInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmBytesTxEntry 2} acPMMediaRealmBytesTxVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmBytesTxEntry 3} acPMMediaRealmBytesTxVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMMediaRealmBytesTxEntry 4} -- **************************************** -- acPMMediaRealmBytesRx table declaration -- **************************************** acPMMediaRealmBytesRxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmBytesRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring MediaRealmBytesRx" ::= {acPMMediaRealm 2} -- **************************************** -- acPMMediaRealmBytesRx table entry -- **************************************** acPMMediaRealmBytesRxEntry OBJECT-TYPE SYNTAX AcPMMediaRealmBytesRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmBytesRxMediaRealmNum,acPMMediaRealmBytesRxInterval} ::= {acPMMediaRealmBytesRxTable 1} -- **************************************** -- acPMMediaRealmBytesRx TABLE -- **************************************** AcPMMediaRealmBytesRxEntry ::= SEQUENCE { acPMMediaRealmBytesRxMediaRealmNum Unsigned32, acPMMediaRealmBytesRxInterval Unsigned32, acPMMediaRealmBytesRxVal Counter32, acPMMediaRealmBytesRxVolume Counter32 } acPMMediaRealmBytesRxMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmBytesRxEntry 1} acPMMediaRealmBytesRxInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmBytesRxEntry 2} acPMMediaRealmBytesRxVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmBytesRxEntry 3} acPMMediaRealmBytesRxVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMMediaRealmBytesRxEntry 4} -- **************************************** -- acPMMediaRealmPacketsTx table declaration -- **************************************** acPMMediaRealmPacketsTxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmPacketsTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring MediaRealmPacketsTx" ::= {acPMMediaRealm 3} -- **************************************** -- acPMMediaRealmPacketsTx table entry -- **************************************** acPMMediaRealmPacketsTxEntry OBJECT-TYPE SYNTAX AcPMMediaRealmPacketsTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmPacketsTxMediaRealmNum,acPMMediaRealmPacketsTxInterval} ::= {acPMMediaRealmPacketsTxTable 1} -- **************************************** -- acPMMediaRealmPacketsTx TABLE -- **************************************** AcPMMediaRealmPacketsTxEntry ::= SEQUENCE { acPMMediaRealmPacketsTxMediaRealmNum Unsigned32, acPMMediaRealmPacketsTxInterval Unsigned32, acPMMediaRealmPacketsTxVal Counter32, acPMMediaRealmPacketsTxVolume Counter32 } acPMMediaRealmPacketsTxMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmPacketsTxEntry 1} acPMMediaRealmPacketsTxInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmPacketsTxEntry 2} acPMMediaRealmPacketsTxVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmPacketsTxEntry 3} acPMMediaRealmPacketsTxVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMMediaRealmPacketsTxEntry 4} -- **************************************** -- acPMMediaRealmPacketsRx table declaration -- **************************************** acPMMediaRealmPacketsRxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmPacketsRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring MediaRealmPacketsRx" ::= {acPMMediaRealm 4} -- **************************************** -- acPMMediaRealmPacketsRx table entry -- **************************************** acPMMediaRealmPacketsRxEntry OBJECT-TYPE SYNTAX AcPMMediaRealmPacketsRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmPacketsRxMediaRealmNum,acPMMediaRealmPacketsRxInterval} ::= {acPMMediaRealmPacketsRxTable 1} -- **************************************** -- acPMMediaRealmPacketsRx TABLE -- **************************************** AcPMMediaRealmPacketsRxEntry ::= SEQUENCE { acPMMediaRealmPacketsRxMediaRealmNum Unsigned32, acPMMediaRealmPacketsRxInterval Unsigned32, acPMMediaRealmPacketsRxVal Counter32, acPMMediaRealmPacketsRxVolume Counter32 } acPMMediaRealmPacketsRxMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmPacketsRxEntry 1} acPMMediaRealmPacketsRxInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmPacketsRxEntry 2} acPMMediaRealmPacketsRxVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmPacketsRxEntry 3} acPMMediaRealmPacketsRxVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMMediaRealmPacketsRxEntry 4} -- **************************************** -- acPMMediaRealmVERealmPacketDelay table declaration -- **************************************** acPMMediaRealmVERealmPacketDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmVERealmPacketDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring VERealmPacketDelay" ::= {acPMMediaRealm 5} -- **************************************** -- acPMMediaRealmVERealmPacketDelay table entry -- **************************************** acPMMediaRealmVERealmPacketDelayEntry OBJECT-TYPE SYNTAX AcPMMediaRealmVERealmPacketDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmVERealmPacketDelayMediaRealmNum,acPMMediaRealmVERealmPacketDelayInterval} ::= {acPMMediaRealmVERealmPacketDelayTable 1} -- **************************************** -- acPMMediaRealmVERealmPacketDelay TABLE -- **************************************** AcPMMediaRealmVERealmPacketDelayEntry ::= SEQUENCE { acPMMediaRealmVERealmPacketDelayMediaRealmNum Unsigned32, acPMMediaRealmVERealmPacketDelayInterval Unsigned32, acPMMediaRealmVERealmPacketDelayVal Counter32, acPMMediaRealmVERealmPacketDelayAverage Integer32, acPMMediaRealmVERealmPacketDelayMax Integer32, acPMMediaRealmVERealmPacketDelayMin Integer32 } acPMMediaRealmVERealmPacketDelayMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmVERealmPacketDelayEntry 1} acPMMediaRealmVERealmPacketDelayInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmVERealmPacketDelayEntry 2} acPMMediaRealmVERealmPacketDelayVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmVERealmPacketDelayEntry 3} acPMMediaRealmVERealmPacketDelayAverage OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMMediaRealmVERealmPacketDelayEntry 4} acPMMediaRealmVERealmPacketDelayMax OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMMediaRealmVERealmPacketDelayEntry 5} acPMMediaRealmVERealmPacketDelayMin OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMMediaRealmVERealmPacketDelayEntry 6} -- **************************************** -- acPMMediaRealmVERealmPacketJitter table declaration -- **************************************** acPMMediaRealmVERealmPacketJitterTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmVERealmPacketJitterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring VERealmPacketJitter" ::= {acPMMediaRealm 6} -- **************************************** -- acPMMediaRealmVERealmPacketJitter table entry -- **************************************** acPMMediaRealmVERealmPacketJitterEntry OBJECT-TYPE SYNTAX AcPMMediaRealmVERealmPacketJitterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmVERealmPacketJitterMediaRealmNum,acPMMediaRealmVERealmPacketJitterInterval} ::= {acPMMediaRealmVERealmPacketJitterTable 1} -- **************************************** -- acPMMediaRealmVERealmPacketJitter TABLE -- **************************************** AcPMMediaRealmVERealmPacketJitterEntry ::= SEQUENCE { acPMMediaRealmVERealmPacketJitterMediaRealmNum Unsigned32, acPMMediaRealmVERealmPacketJitterInterval Unsigned32, acPMMediaRealmVERealmPacketJitterVal Counter32, acPMMediaRealmVERealmPacketJitterAverage Integer32, acPMMediaRealmVERealmPacketJitterMax Integer32, acPMMediaRealmVERealmPacketJitterMin Integer32 } acPMMediaRealmVERealmPacketJitterMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmVERealmPacketJitterEntry 1} acPMMediaRealmVERealmPacketJitterInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmVERealmPacketJitterEntry 2} acPMMediaRealmVERealmPacketJitterVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmVERealmPacketJitterEntry 3} acPMMediaRealmVERealmPacketJitterAverage OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMMediaRealmVERealmPacketJitterEntry 4} acPMMediaRealmVERealmPacketJitterMax OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMMediaRealmVERealmPacketJitterEntry 5} acPMMediaRealmVERealmPacketJitterMin OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMMediaRealmVERealmPacketJitterEntry 6} -- **************************************** -- acPMMediaRealmRealmMOS table declaration -- **************************************** acPMMediaRealmRealmMOSTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmRealmMOSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring RealmMOS" ::= {acPMMediaRealm 7} -- **************************************** -- acPMMediaRealmRealmMOS table entry -- **************************************** acPMMediaRealmRealmMOSEntry OBJECT-TYPE SYNTAX AcPMMediaRealmRealmMOSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmRealmMOSMediaRealmNum,acPMMediaRealmRealmMOSInterval} ::= {acPMMediaRealmRealmMOSTable 1} -- **************************************** -- acPMMediaRealmRealmMOS TABLE -- **************************************** AcPMMediaRealmRealmMOSEntry ::= SEQUENCE { acPMMediaRealmRealmMOSMediaRealmNum Unsigned32, acPMMediaRealmRealmMOSInterval Unsigned32, acPMMediaRealmRealmMOSVal Counter32, acPMMediaRealmRealmMOSAverage Integer32, acPMMediaRealmRealmMOSMax Integer32, acPMMediaRealmRealmMOSMin Integer32 } acPMMediaRealmRealmMOSMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmRealmMOSEntry 1} acPMMediaRealmRealmMOSInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmRealmMOSEntry 2} acPMMediaRealmRealmMOSVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmRealmMOSEntry 3} acPMMediaRealmRealmMOSAverage OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMMediaRealmRealmMOSEntry 4} acPMMediaRealmRealmMOSMax OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMMediaRealmRealmMOSEntry 5} acPMMediaRealmRealmMOSMin OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMMediaRealmRealmMOSEntry 6} -- **************************************** -- acPMMediaRealmBwRx table declaration -- **************************************** acPMMediaRealmBwRxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmBwRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring MediaRealmBwRx" ::= {acPMMediaRealm 8} -- **************************************** -- acPMMediaRealmBwRx table entry -- **************************************** acPMMediaRealmBwRxEntry OBJECT-TYPE SYNTAX AcPMMediaRealmBwRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmBwRxMediaRealmNum,acPMMediaRealmBwRxInterval} ::= {acPMMediaRealmBwRxTable 1} -- **************************************** -- acPMMediaRealmBwRx TABLE -- **************************************** AcPMMediaRealmBwRxEntry ::= SEQUENCE { acPMMediaRealmBwRxMediaRealmNum Unsigned32, acPMMediaRealmBwRxInterval Unsigned32, acPMMediaRealmBwRxVal Counter32, acPMMediaRealmBwRxAverage Integer32, acPMMediaRealmBwRxMax Integer32, acPMMediaRealmBwRxMin Integer32, acPMMediaRealmBwRxTimeBelowLowThreshold Integer32, acPMMediaRealmBwRxTimeBetweenThresholds Integer32, acPMMediaRealmBwRxTimeAboveHighThreshold Integer32, acPMMediaRealmBwRxFullDayAverage Integer32, acPMMediaRealmBwRxTotal Counter32 } acPMMediaRealmBwRxMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmBwRxEntry 1} acPMMediaRealmBwRxInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmBwRxEntry 2} acPMMediaRealmBwRxVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmBwRxEntry 3} acPMMediaRealmBwRxAverage OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMMediaRealmBwRxEntry 4} acPMMediaRealmBwRxMax OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMMediaRealmBwRxEntry 5} acPMMediaRealmBwRxMin OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMMediaRealmBwRxEntry 6} acPMMediaRealmBwRxTimeBelowLowThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is below what was determined as the low threshold." ::= {acPMMediaRealmBwRxEntry 7} acPMMediaRealmBwRxTimeBetweenThresholds OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is above what was determined as the high threshold." ::= {acPMMediaRealmBwRxEntry 8} acPMMediaRealmBwRxTimeAboveHighThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMMediaRealmBwRxEntry 9} acPMMediaRealmBwRxFullDayAverage OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The average of full 24 hours." ::= {acPMMediaRealmBwRxEntry 10} acPMMediaRealmBwRxTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMMediaRealmBwRxEntry 11} -- **************************************** -- acPMMediaRealmBwTx table declaration -- **************************************** acPMMediaRealmBwTxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmBwTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring MediaRealmBwTx" ::= {acPMMediaRealm 9} -- **************************************** -- acPMMediaRealmBwTx table entry -- **************************************** acPMMediaRealmBwTxEntry OBJECT-TYPE SYNTAX AcPMMediaRealmBwTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmBwTxMediaRealmNum,acPMMediaRealmBwTxInterval} ::= {acPMMediaRealmBwTxTable 1} -- **************************************** -- acPMMediaRealmBwTx TABLE -- **************************************** AcPMMediaRealmBwTxEntry ::= SEQUENCE { acPMMediaRealmBwTxMediaRealmNum Unsigned32, acPMMediaRealmBwTxInterval Unsigned32, acPMMediaRealmBwTxVal Counter32, acPMMediaRealmBwTxAverage Integer32, acPMMediaRealmBwTxMax Integer32, acPMMediaRealmBwTxMin Integer32, acPMMediaRealmBwTxTimeBelowLowThreshold Integer32, acPMMediaRealmBwTxTimeBetweenThresholds Integer32, acPMMediaRealmBwTxTimeAboveHighThreshold Integer32, acPMMediaRealmBwTxFullDayAverage Integer32, acPMMediaRealmBwTxTotal Counter32 } acPMMediaRealmBwTxMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmBwTxEntry 1} acPMMediaRealmBwTxInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmBwTxEntry 2} acPMMediaRealmBwTxVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmBwTxEntry 3} acPMMediaRealmBwTxAverage OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Average value with in the period time." ::= {acPMMediaRealmBwTxEntry 4} acPMMediaRealmBwTxMax OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum value with in the period time." ::= {acPMMediaRealmBwTxEntry 5} acPMMediaRealmBwTxMin OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum value with in the period time." ::= {acPMMediaRealmBwTxEntry 6} acPMMediaRealmBwTxTimeBelowLowThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is below what was determined as the low threshold." ::= {acPMMediaRealmBwTxEntry 7} acPMMediaRealmBwTxTimeBetweenThresholds OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is above what was determined as the high threshold." ::= {acPMMediaRealmBwTxEntry 8} acPMMediaRealmBwTxTimeAboveHighThreshold OBJECT-TYPE SYNTAX Integer32 (-1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of interval time for which gauge is between what were determined as the low and high thresholds." ::= {acPMMediaRealmBwTxEntry 9} acPMMediaRealmBwTxFullDayAverage OBJECT-TYPE SYNTAX Integer32 (-1..2150000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The average of full 24 hours." ::= {acPMMediaRealmBwTxEntry 10} acPMMediaRealmBwTxTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMMediaRealmBwTxEntry 11} -- **************************************** -- acPMMediaRealmPacketLossRx table declaration -- **************************************** acPMMediaRealmPacketLossRxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmPacketLossRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring MediaRealmPacketLossRx" ::= {acPMMediaRealm 10} -- **************************************** -- acPMMediaRealmPacketLossRx table entry -- **************************************** acPMMediaRealmPacketLossRxEntry OBJECT-TYPE SYNTAX AcPMMediaRealmPacketLossRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmPacketLossRxMediaRealmNum,acPMMediaRealmPacketLossRxInterval} ::= {acPMMediaRealmPacketLossRxTable 1} -- **************************************** -- acPMMediaRealmPacketLossRx TABLE -- **************************************** AcPMMediaRealmPacketLossRxEntry ::= SEQUENCE { acPMMediaRealmPacketLossRxMediaRealmNum Unsigned32, acPMMediaRealmPacketLossRxInterval Unsigned32, acPMMediaRealmPacketLossRxVal Counter32, acPMMediaRealmPacketLossRxVolume Counter32 } acPMMediaRealmPacketLossRxMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmPacketLossRxEntry 1} acPMMediaRealmPacketLossRxInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmPacketLossRxEntry 2} acPMMediaRealmPacketLossRxVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmPacketLossRxEntry 3} acPMMediaRealmPacketLossRxVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMMediaRealmPacketLossRxEntry 4} -- **************************************** -- acPMMediaRealmPacketLossTx table declaration -- **************************************** acPMMediaRealmPacketLossTxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcPMMediaRealmPacketLossTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring MediaRealmPacketLossTx" ::= {acPMMediaRealm 11} -- **************************************** -- acPMMediaRealmPacketLossTx table entry -- **************************************** acPMMediaRealmPacketLossTxEntry OBJECT-TYPE SYNTAX AcPMMediaRealmPacketLossTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acPMMediaRealmPacketLossTxMediaRealmNum,acPMMediaRealmPacketLossTxInterval} ::= {acPMMediaRealmPacketLossTxTable 1} -- **************************************** -- acPMMediaRealmPacketLossTx TABLE -- **************************************** AcPMMediaRealmPacketLossTxEntry ::= SEQUENCE { acPMMediaRealmPacketLossTxMediaRealmNum Unsigned32, acPMMediaRealmPacketLossTxInterval Unsigned32, acPMMediaRealmPacketLossTxVal Counter32, acPMMediaRealmPacketLossTxVolume Counter32 } acPMMediaRealmPacketLossTxMediaRealmNum OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media Realm number. 0 is the first Media Realm." ::= {acPMMediaRealmPacketLossTxEntry 1} acPMMediaRealmPacketLossTxInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last." ::= {acPMMediaRealmPacketLossTxEntry 2} acPMMediaRealmPacketLossTxVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of gauge or counter." ::= {acPMMediaRealmPacketLossTxEntry 3} acPMMediaRealmPacketLossTxVolume OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Activity volume." ::= {acPMMediaRealmPacketLossTxEntry 4} END