AC-PSTN-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TAddress, DisplayString, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC IpAddress FROM RFC1155-SMI Unsigned32, Integer32, enterprises FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF audioCodes, acRegistrations, acGeneric, acProducts,acBoardMibs FROM AUDIOCODES-TYPES-MIB; acPSTN MODULE-IDENTITY LAST-UPDATED "201209241539Z" --Monday, September 24 2012 ORGANIZATION "AudioCodes Ltd" CONTACT-INFO "Postal: Support AudioCodes LTD 1 Hayarden Street Airport City Lod, ISRAEL 70151 Tel: 972-3-9764000 Fax: 972-3-9764040 Email: support@audiocodes.com Web: www.audiocodes.com" DESCRIPTION "" ::= {acBoardMibs 9} acPSTNConfiguration OBJECT IDENTIFIER ::= {acPSTN 1} acTrunkConfig OBJECT IDENTIFIER ::= {acPSTNConfiguration 1} acTrunk OBJECT IDENTIFIER ::= {acTrunkConfig 1} -- **************************************** -- acTrunk table declaration -- **************************************** acTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF AcTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acTrunk 1} -- **************************************** -- acTrunk table entry -- **************************************** acTrunkEntry OBJECT-TYPE SYNTAX AcTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acTrunkIndex} ::= {acTrunkTable 1} -- **************************************** -- acTrunk TABLE -- **************************************** AcTrunkEntry ::= SEQUENCE { acTrunkIndex Unsigned32, acTrunkAdministrativeState INTEGER, acTrunkProtocolType INTEGER, acTrunkClockMaster INTEGER, acTrunkFramingMethod INTEGER, acTrunkLineCode INTEGER, acTrunkTraceLevel INTEGER, acTrunkDialPlanName SnmpAdminString, acTrunkLineType INTEGER, acTrunkAutoClockPriority Unsigned32, acTrunkDeactivate INTEGER, acTrunkLoopbackConfig INTEGER } acTrunkIndex OBJECT-TYPE SYNTAX Unsigned32 (0..83) MAX-ACCESS read-only STATUS current DESCRIPTION "Trunk ID at board in which the call is taking place. AC INI-Param: N/A" ::= {acTrunkEntry 1} acTrunkAdministrativeState OBJECT-TYPE SYNTAX INTEGER { locked(0) , unLocked(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Trunk Administrative State. Access: Online. AC INI-Param: N/A" ::= {acTrunkEntry 2} acTrunkProtocolType OBJECT-TYPE SYNTAX INTEGER { nONE(0) , e1EuroISDN(1) , t1Cas(2) , t1RawCas(3) , t1Transparent(4) , e1Transparent31(5) , e1Transparent30(6) , e1Mfcr2(7) , e1CasR2(8) , e1RawCAS(9) , t1-NI2ISDN(10) , t1-4EssISDN(11) , t1-5Ess-9-ISDN(12) , t1-5Ess-10-ISDN(13) , t1-Dms100-ISDN(14) , j1-TRANSPARENT(15) , t1-NTT-ISDN(16) , e1-AUSTEL-ISDN(17) , e1-HKT-ISDN(18) , e1-KOR-ISDN(19) , t1-HKT-ISDN(20) , e1-QSIG(21) , e1-TNZ-22(22) , t1-EXTRA-23(23) , t1-IUA(28) , e1-IUA(29) , e1-EXTRA-30(30) , e1-FRENCH-VN3-ISDN(31) , t1-EXTRA-32(32) , eXTRA-33(33) , t1-EURO-ISDN(34) , t1-DMS100-MERIDIAN-ISDN(35) , t1-NI1-ISDN(36) , e1-DUA(37) , e1-Q931-PACKETS(38) , t1-Q931-PACKETS(39) , e1-NI2-ISDN(40) , e1-CAS-R15(41) , v5(43) , bRI-EURO-ISDN(50) , bRI-NI-2(51) , bRI-DMS100(52) , bRI-5ESS(53) , bRI-QSIG(54) , bRI-VNG(55) , bRI-NTT(56) , bRI-IUA(57) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to set the PSTN protocol to be used for this trunk. Relevant only when TDMBusType=acFRAMERS (2). Either: NONE = 0 E1_EURO_ISDN = 1 T1_CAS = 2 T1_RAW_CAS = 3 T1_TRANSPARENT = 4 E1_TRANSPARENT_31 = 5 E1_TRANSPARENT_30 = 6 E1_MFCR2 = 7 E1_CAS = 8 E1_RAW_CAS = 9 T1_NI2_ISDN = 10 T1_4ESS_ISDN = 11 T1_5ESS_9_ISDN = 12 T1_5ESS_10_ISDN = 13 T1_DMS100_ISDN = 14 J1_TRANSPARENT = 15 T1_NTT_ISDN = 16 E1_AUSTEL_ISDN = 17 E1_HKT_ISDN = 18 E1_KOR_ISDN = 19 T1_HKT_ISDN = 20 E1_QSIG = 21 E1_TNZ_ISDN = 22 T1_QSIG = 23 T1_IUA = 28 E1_IUA = 29 E1_FRENCH_VN6_ISDN = 30 E1_FRENCH_VN3_ISDN = 31 T1_EURO_ISDN = 34 T1_DMS100_MERIDIAN_ISDN = 35 T1_NI1_ISDN = 36 E1_DUA = 37 E1_Q931_PACKETS = 38 T1_Q931_PACKETS = 39 E1_NI2_ISDN = 40 E1-CAS-R15 = 41 V5 = 43 BRI-EURO-ISDN = 50 BRI-NI-2 = 51 BRI-DMS100 = 52 BRI-5ESS = 53 BRI-QSIG = 54 BRI-VNG = 55 BRI-NTT = 56 BRI-IUA = 57. . Access: Online. AC INI-Param: PROTOCOLTYPE" ::= {acTrunkEntry 3} acTrunkClockMaster OBJECT-TYPE SYNTAX INTEGER { acCLOCK-MASTER-OFF(0) , acCLOCK-MASTER-ON(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to select the trunk clock source. 0 = acCLOCK_MASTER_OFF (clock recovered from the line) 1 = acCLOCK_MASTER_ON (the trunk clock source is provided by the internal/TDM bus clock source depending on the parameter TDM Bus Clock Source). Access: Online. AC INI-Param: CLOCKMASTER" ::= {acTrunkEntry 4} acTrunkFramingMethod OBJECT-TYPE SYNTAX INTEGER { eXTENDED-SUPER-FRAME(0) , sUPER-FRAME(1) , e1-FRAMING-DDF(2) , e1-FRAMING-MFF-CRC4(3) , e1-FRAMING-MFF-CRC4-EXT(4) , t1-FRAMING-F4(6) , t1-FRAMING-F12(7) , t1-FRAMING-ESF(8) , t1-FRAMING-ESF-CRC6 (9) , t1-FRAMING-F72(10) , t1-FRAMING-ESF-CRC6-JT(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the Framing method to be used for this trunk. Access: Online. AC INI-Param: N/A" ::= {acTrunkEntry 5} acTrunkLineCode OBJECT-TYPE SYNTAX INTEGER { acB8ZS(0) , acAMI(1) , acHDB3(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use to select line code. B8ZS or AMI for T1 spans and HDB3 or AMI for E1 spans. 0 = Use B8ZS line code (for T1 trunks only = default) 1 = Use AMI line code (for T1 or E1 trunks) 2 = Use HDB3 line code (for E1 trunks only). Access: Online. AC INI-Param: LINECODE" ::= {acTrunkEntry 6} acTrunkTraceLevel OBJECT-TYPE SYNTAX INTEGER { acNO-TRACE(0) , acFULL-ISDN-TRACE(1) , acLAYER3-ISDN-TRACE(2) , acONLY-ISDN-Q931-MSGS-TRACE(3) , acLAYER3-ISDN-TRACE-NO-DUPLICATION(4) , acFULL-ISDN-TRACE-WITH-DUPLICATION(5) , acISDN-Q931-RAW-DATA-TRACE(6) , acISDN-Q921-RAW-DATA-TRACE(7) , acISDN-Q931-Q921-RAW-DATA-TRACE(8) , acSS7-MTP2(10) , acSS7-MTP2-AND-APPLI(11) , acSS7-MTP2-SL-L3-NO-MSU(12) , acSS7-AAL(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Trace level: acNO_TRACE = 0 acFULL_ISDN_TRACE = 1 acLAYER3_ISDN_TRACE = 2 acONLY_ISDN_Q931_MSGS_TRACE = 3 acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4 acFULL_ISDN_TRACE_WITH_DUPLICATION = 5 acISDN_Q931_RAW_DATA_TRACE = 6 acISDN_Q921_RAW_DATA_TRACE = 7 acISDN_Q931_Q921_RAW_DATA_TRACE = 8 acSS7_MTP2 = 10 acSS7_MTP2_AND_APPLI = 11 acSS7_MTP2_SL_L3_NO_MSU = 12 acSS7_AAL = 15. Access: Online. AC INI-Param: TRACELEVEL" ::= {acTrunkEntry 7} acTrunkDialPlanName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..11)) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Dial Plan name that will be used on the specific trunk. Range = string 11 characters. Access: Instant. AC INI-Param: CasTrunkDialPlanName" ::= {acTrunkEntry 8} acTrunkLineType OBJECT-TYPE SYNTAX INTEGER { lineTypeE1(10) , lineTypeT1(11) , lineTypeBRI(12) , lineTypeUnknown(21) } MAX-ACCESS read-only STATUS current DESCRIPTION "Line type. lineTypeBRI(12) - If the physical type is BRI. lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are other lines that are already configured to either E1 or T1. lineTypeUnknown(-1) - For non BRI IF when no lines are configured. AC INI-Param: N/A" ::= {acTrunkEntry 9} acTrunkAutoClockPriority OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the trunk priority for auto-clock fallback (Priority range: 0 - 100 (0 - 99 are priority settings, in which 0 = highest Priority and is the default setting 100 = Do not choose this trunk). Access: Online. AC INI-Param: AutoClockTrunkPriority" ::= {acTrunkEntry 10} acTrunkDeactivate OBJECT-TYPE SYNTAX INTEGER { notAvailable(0) , deActivated(1) , activated(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Deactivating a trunk forces AIS alarm on that trunk. Deactivation is used for trunk maintenance without locking the trunk. Activating the trunk will stop the alarm on the trunk. notAvailable(0) appears when the trunk is locked. The trunk can't be SET to this state. Access: Online. AC INI-Param: N/A" ::= {acTrunkEntry 11} acTrunkLoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(0) , lineLoop(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the loopback state of the trunk. Access: Offline. AC INI-Param: N/A" ::= {acTrunkEntry 12} acTrunkLine OBJECT IDENTIFIER ::= {acTrunkConfig 2} -- **************************************** -- acTrunkLine table declaration -- **************************************** acTrunkLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AcTrunkLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= {acTrunkLine 1} -- **************************************** -- acTrunkLine table entry -- **************************************** acTrunkLineEntry OBJECT-TYPE SYNTAX AcTrunkLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "configuration of the DS1 interface. " INDEX {acTrunkIndex} ::= {acTrunkLineTable 1} -- **************************************** -- acTrunkLine TABLE -- **************************************** AcTrunkLineEntry ::= SEQUENCE { acTrunkLineBuildOutLoss INTEGER, acTrunkLineBuildOutOverwrite INTEGER, acTrunkLineBuildOutXPM0 Unsigned32, acTrunkLineBuildOutXPM1 Unsigned32, acTrunkLineBuildOutXPM2 Unsigned32 } acTrunkLineBuildOutLoss OBJECT-TYPE SYNTAX INTEGER { ac0DB(0) , ac7-5DB(1) , ac15DB(2) , ac22-5DB(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to select the line build out loss to be used for this trunk. 0 = 0 dB 1 = 7.5 dB 2 = 15 dB 3 = 22.5 dB. Access: Online. AC INI-Param: LINEBUILDOUT.LOSS" ::= {acTrunkLineEntry 1} acTrunkLineBuildOutOverwrite OBJECT-TYPE SYNTAX INTEGER { acNO-OVER-WRITE(0) , acOVER-WRITE(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to overwrite the Framer's XPM registers values (these registers control the line pulse shape). 0 = No overwrite 1 = Overwrite. Access: Online. AC INI-Param: LINEBUILDOUT.OVERWRITE" ::= {acTrunkLineEntry 2} acTrunkLineBuildOutXPM0 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to control the Framer's XPM0 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Online. AC INI-Param: LINEBUILDOUT.XPM0" ::= {acTrunkLineEntry 3} acTrunkLineBuildOutXPM1 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to control the Framer's XPM1 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Online. AC INI-Param: LINEBUILDOUT.XPM1" ::= {acTrunkLineEntry 4} acTrunkLineBuildOutXPM2 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to control the Framer's XPM2 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Online. AC INI-Param: LINEBUILDOUT.XPM2" ::= {acTrunkLineEntry 5} acTrunkISDN OBJECT IDENTIFIER ::= {acTrunkConfig 3} acTrunkISDNCommon OBJECT IDENTIFIER ::= {acTrunkISDN 1} -- **************************************** -- acTrunkISDNCommon table declaration -- **************************************** acTrunkISDNCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF AcTrunkISDNCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acTrunkISDNCommon 1} -- **************************************** -- acTrunkISDNCommon table entry -- **************************************** acTrunkISDNCommonEntry OBJECT-TYPE SYNTAX AcTrunkISDNCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acTrunkIndex} ::= {acTrunkISDNCommonTable 1} -- **************************************** -- acTrunkISDNCommon TABLE -- **************************************** AcTrunkISDNCommonEntry ::= SEQUENCE { acTrunkISDNCommonTerminationSide INTEGER, acTrunkISDNCommonQ931LayerResponseBehavior Integer32, acTrunkISDNCommonIncomingCallsBehavior Unsigned32, acTrunkISDNCommonOutgoingCallsBehavior Unsigned32, acTrunkISDNCommonGeneralCCBehavior Unsigned32, acTrunkISDNCommonIuaInterfaceId Integer32, acTrunkISDNCommonDuplicateQ931BuffMode Unsigned32, acTrunkISDNCommonBRILayer2Mode INTEGER, acTrunkISDNCommonNSBehaviour2 Unsigned32, acTrunkISDNCommonRestartBChannel Integer32 } acTrunkISDNCommonTerminationSide OBJECT-TYPE SYNTAX INTEGER { acUSER-TERMINATION-SIDE(0) , acNETWORK-TERMINATION-SIDE(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to set the ISDN Termination to either User or Network. Termination = For ISDN only. User side = 0 Network side = 1. Access: Online. AC INI-Param: TERMINATIONSIDE" ::= {acTrunkISDNCommonEntry 1} acTrunkISDNCommonQ931LayerResponseBehavior OBJECT-TYPE SYNTAX Integer32 (-2147483647..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Bit-field used to determine several behavior options, which influence how the Q.931 protocol behaves. Access: Online. AC INI-Param: ISDNIBEHAVIOR" ::= {acTrunkISDNCommonEntry 2} acTrunkISDNCommonIncomingCallsBehavior OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the bit-field used to determine several behavior options that influence how the ISDN Stack INCOMING calls behave. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. Access: Online. AC INI-Param: ISDNINCALLSBEHAVIOR" ::= {acTrunkISDNCommonEntry 3} acTrunkISDNCommonOutgoingCallsBehavior OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the bit-field used to determine several behavior options that influence how the ISDN Stack OUTGOING calls behave. Refer to Appendix A.8 in the 'VoPLib Reference Library User's Manual. Access: Online. AC INI-Param: ISDNOUTCALLSBEHAVIOR" ::= {acTrunkISDNCommonEntry 4} acTrunkISDNCommonGeneralCCBehavior OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the bit-field used to determine several general ISDN behavior options. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. Access: Online. AC INI-Param: ISDNGENERALCCBEHAVIOR" ::= {acTrunkISDNCommonEntry 5} acTrunkISDNCommonIuaInterfaceId OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the IUA trunk interface ID value - unsigned integer - in RFC 3057 - SIGTRAN. Default = 0xFFFFFFFF. AC INI-Param: N/A" ::= {acTrunkISDNCommonEntry 6} acTrunkISDNCommonDuplicateQ931BuffMode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Activates / de-activates delivery of raw Q.931 messages. Refer to the VoPLib documentation ('ISDN Flexible Behavior'). Access: Online. AC INI-Param: ISDNDUPLICATEQ931BUFFMODE" ::= {acTrunkISDNCommonEntry 7} acTrunkISDNCommonBRILayer2Mode OBJECT-TYPE SYNTAX INTEGER { bRI-L2-MODE-P2P(0) , bRI-L2-MODE-P2MP(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates point to point or point to Multipoint mode for layer2. Applicable in BRI trunks only. One of the following values: Point to point = 0 Point to Multipoint = 1 . Access: Online. AC INI-Param: BriLayer2Mode" ::= {acTrunkISDNCommonEntry 8} acTrunkISDNCommonNSBehaviour2 OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Bit-field used to determine several behavior options, which influence how the Q.931 protocol behaves. Refer to the VoPLib documentation (ISDN Flexible Behavior). Access: Online. AC INI-Param: ISDNNSBehaviour2" ::= {acTrunkISDNCommonEntry 9} acTrunkISDNCommonRestartBChannel OBJECT-TYPE SYNTAX Integer32 (-1..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Sends restart request for a specific B-channel. Only ONE restart request at a time for a given trunk should be sent, since the restart state machine is not on per B-channel basis, but on a per trunk basis. Inputs: E1: -1, 1 - 31. T1: -1, 1 - 24. Use -1 to reset and re-initialize all B-channels in the selected trunk. Access: Online. AC INI-Param: N/A" ::= {acTrunkISDNCommonEntry 10} acTrunkISDNNfas OBJECT IDENTIFIER ::= {acTrunkISDN 2} -- **************************************** -- acTrunkISDNNfas table declaration -- **************************************** acTrunkISDNNfasTable OBJECT-TYPE SYNTAX SEQUENCE OF AcTrunkISDNNfasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acTrunkISDNNfas 1} -- **************************************** -- acTrunkISDNNfas table entry -- **************************************** acTrunkISDNNfasEntry OBJECT-TYPE SYNTAX AcTrunkISDNNfasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acTrunkIndex} ::= {acTrunkISDNNfasTable 1} -- **************************************** -- acTrunkISDNNfas TABLE -- **************************************** AcTrunkISDNNfasEntry ::= SEQUENCE { acTrunkISDNNfasDchConfig INTEGER, acTrunkISDNNfasInterfaceId Unsigned32, acTrunkISDNNfasGroupNumber Unsigned32 } acTrunkISDNNfasDchConfig OBJECT-TYPE SYNTAX INTEGER { acDCH-CONFIG-PRIMARY(0) , acDCH-CONFIG-BACKUP(1) , acDCH-CONFIG-NFAS(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines D-channel configuration. This setting is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = D-channel is Primary 1 = Backup 2 = NFAS. Access: Online. AC INI-Param: DCHCONFIG" ::= {acTrunkISDNNfasEntry 1} acTrunkISDNNfasInterfaceId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Interface ID. Works with NS_EXPLICIT_INTERFACE_ID. Refer to the VoPLib documentation(ISDN Flexible Behavior). Default = (unsigned char)-1. Range = 0 to 255. Access: Online. AC INI-Param: ISDNNFASINTERFACEID" ::= {acTrunkISDNNfasEntry 2} acTrunkISDNNfasGroupNumber OBJECT-TYPE SYNTAX Unsigned32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Relevant only for T1 ISDN NFAS trunks indicates the group number of the NFAS group. ;Valid NFAS group numbers are only 1 to 9, 0 indicating that this trunk is not NFAS (in this case the ISDNNFASInterfaceID and DchConfig parameters are ignored). Access: Online. AC INI-Param: NFASGROUPNUMBER" ::= {acTrunkISDNNfasEntry 3} acTrunkISDNDpnss OBJECT IDENTIFIER ::= {acTrunkISDN 3} -- **************************************** -- acTrunkISDNDpnss table declaration -- **************************************** acTrunkISDNDpnssTable OBJECT-TYPE SYNTAX SEQUENCE OF AcTrunkISDNDpnssEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acTrunkISDNDpnss 1} -- **************************************** -- acTrunkISDNDpnss table entry -- **************************************** acTrunkISDNDpnssEntry OBJECT-TYPE SYNTAX AcTrunkISDNDpnssEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acTrunkIndex} ::= {acTrunkISDNDpnssTable 1} -- **************************************** -- acTrunkISDNDpnss TABLE -- **************************************** AcTrunkISDNDpnssEntry ::= SEQUENCE { acTrunkISDNDpnssBehavior Unsigned32, acTrunkISDNDpnssNumRealChannels Unsigned32, acTrunkISDNDpnssNumVirtualChannels Unsigned32 } acTrunkISDNDpnssBehavior OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The DPNSSBehaviour parameter represents a Bit field parameter. Each bit represents a specific type of DPNSS behavior. Currently only the first 2 bits are in use. - DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bit mask 0x0001) When set to 1: DPNSS stops repeating SABMR after NL and NT1 limits are exceeded. When set to 0: DPNSS continues repeating SABMR after NL and NT1 limits are exceeded. Default is 0 (continue repeating SABMR) - DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bit mask 0x0002) When set to 1: the Startup Procedure is considered as a SUCCESS only when ALL DLCs succeeded to Reset When set to 0: the Startup Procedure is considered as a SUCCESS as soon as 1 DLC succeeded to Reset Default is 0: (only partial reset is considered as a success). . Access: Online. AC INI-Param: DPNSSBehavior" ::= {acTrunkISDNDpnssEntry 1} acTrunkISDNDpnssNumRealChannels OBJECT-TYPE SYNTAX Unsigned32 (1..30) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is relevant only to protocol ISDN DPNSS. Defines the number of real channels. Default value is 30. Valid range 1 to 30. Access: Online. AC INI-Param: DPNSSNumRealChannels" ::= {acTrunkISDNDpnssEntry 2} acTrunkISDNDpnssNumVirtualChannels OBJECT-TYPE SYNTAX Unsigned32 (0..30) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is relevant only to protocol ISDN DPNSS. Defines the number of virtual channels. Default value is 30. Valid range 0 to 30. Access: Online. AC INI-Param: DPNSSNumVirtualChannels" ::= {acTrunkISDNDpnssEntry 3} acTrunkCAS OBJECT IDENTIFIER ::= {acTrunkConfig 4} -- **************************************** -- acTrunkCAS table declaration -- **************************************** acTrunkCASTable OBJECT-TYPE SYNTAX SEQUENCE OF AcTrunkCASEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acTrunkCAS 1} -- **************************************** -- acTrunkCAS table entry -- **************************************** acTrunkCASEntry OBJECT-TYPE SYNTAX AcTrunkCASEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acTrunkIndex} ::= {acTrunkCASTable 1} -- **************************************** -- acTrunkCAS TABLE -- **************************************** AcTrunkCASEntry ::= SEQUENCE { acTrunkCASTablesIndex Unsigned32, acTrunkCASTablePerChannel SnmpAdminString } acTrunkCASTablesIndex OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter determines which CAS protocol file to use on a specific trunk. The index value corresponds to the number configured for the parameter CASFileName_X. Range = not greater than the parameter defining the PSTN CAS Table Num. Access: Online. AC INI-Param: CASTABLEINDEX" ::= {acTrunkCASEntry 1} acTrunkCASTablePerChannel OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Cas protocol table index per channel. User need to set each channel the table number 0-7, with comma saperator between channels: '1,3,1,3,1,3..'. Access: Instant. AC INI-Param: CasChannelIndex" ::= {acTrunkCASEntry 2} acTrunkV5 OBJECT IDENTIFIER ::= {acTrunkConfig 5} -- **************************************** -- acTrunkV5 table declaration -- **************************************** acTrunkV5Table OBJECT-TYPE SYNTAX SEQUENCE OF AcTrunkV5Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acTrunkV5 1} -- **************************************** -- acTrunkV5 table entry -- **************************************** acTrunkV5Entry OBJECT-TYPE SYNTAX AcTrunkV5Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acTrunkIndex} ::= {acTrunkV5Table 1} -- **************************************** -- acTrunkV5 TABLE -- **************************************** AcTrunkV5Entry ::= SEQUENCE { acTrunkV5NumberOfCChannels Unsigned32, acTrunkV5ProtocolSide INTEGER } acTrunkV5NumberOfCChannels OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of timeslots used as communication channels in a V5 trunk. 0 - No C-channel, the trunk is voice only. 1 - Timeslot 16 is used for the V5 signaling . Access: Online. AC INI-Param: V5NumberOfCChannels" ::= {acTrunkV5Entry 1} acTrunkV5ProtocolSide OBJECT-TYPE SYNTAX INTEGER { an-Side(0) , le-Side(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the V5 side of the V5 protocol served by the trunk.. 0 - AN side. 1 - LE side . Access: Online. AC INI-Param: V5ProtocolSide" ::= {acTrunkV5Entry 2} acTrunkGlobal OBJECT IDENTIFIER ::= {acTrunkConfig 8} acTrunkGlobalLifeLineType OBJECT-TYPE SYNTAX INTEGER { hW-Only(0) , hW-And-Link-Detection(1) , hW-And-Link-And-Network-Detection(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used to define the type of trunk lifeline. Short trunks 1-2, 3-4. 0 = Activate lifeline on power down 1 = Activate lifeline on power down or on detection of LAN disconnect 2 = Activate lifeline on power down or on detection of LAN disconnect or loss of ping. Access: Offline. AC INI-Param: TrunkLifeLineType" ::= {acTrunkGlobal 1} acTrunkGlobalBChannelAlarms OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to 1 B-Channels Alarms will be sent. Access: Offline. AC INI-Param: BChannelAlarms" ::= {acTrunkGlobal 2} acISDNConfig OBJECT IDENTIFIER ::= {acPSTNConfiguration 2} acMiscISDN OBJECT IDENTIFIER ::= {acISDNConfig 1} acMiscISDNQ931RelayMode OBJECT-TYPE SYNTAX INTEGER { none(0) , activateLAPDmessaging (1) , layer3-IS-IUA (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Activates / de-activates the ISDN level 3 Q.931 Relay Mode. Choose 0 or ActivateLAPDmessaging or Q931_RELAY_TO_HOST or Layer3_IS_IUA. Access: Offline. AC INI-Param: Q931RELAYMODE" ::= {acMiscISDN 1} acMiscISDNDuplicateQ931BuffMode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS obsolete DESCRIPTION " Access: Offline. AC INI-Param: ISDNDUPLICATEQ931BUFFMODE" ::= {acMiscISDN 2} acDS3Config OBJECT IDENTIFIER ::= {acPSTNConfiguration 3} acDS3ConfigFramingMethod OBJECT-TYPE SYNTAX INTEGER { dS3-M23(0) , dS3-C-BIT-PARITY(1) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to select the physical DS3 framing method to be used in this board. 0 = M23 framing 1 = C Bit Parity. Access: Offline. AC INI-Param: DS3FRAMINGMETHOD" ::= {acDS3Config 1} acDS3ConfigClockSource OBJECT-TYPE SYNTAX INTEGER { acClock-Source-External(0) , acClock-Source-Local-Board(1) , acClock-Source-Local-PLL(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Selects the physical DS3 framing method to be used in this board. Applicable only to the TP-2810. 0 = DS3 Clock is recovered from the line 1 = DS3 trunk clock source is provided by the board's internal clock 2 = Clock is taken from the local PLL which is not synchronized with any other clock. Access: Offline. AC INI-Param: DS3CLOCKSOURCE" ::= {acDS3Config 2} acDS3ConfigLineBuiltOut OBJECT-TYPE SYNTAX INTEGER { acLINE-BUILT-OUT-LEVEL-1(0) , acLINE-BUILT-OUT-LEVEL-2(1) , acLINE-BUILT-OUT-LEVEL-3(2) , acLINE-BUILT-OUT-LEVEL-4(3) , acLINE-BUILT-OUT-LEVEL-5(4) , acLINE-BUILT-OUT-LEVEL-6(5) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to select the DS3 line build out. Applies only to the TP-2810. Access: Offline. AC INI-Param: DS3LINEBUILTOUT" ::= {acDS3Config 3} acCasConfig OBJECT IDENTIFIER ::= {acPSTNConfiguration 4} acCasConfigEnable OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter enables or disables the possibility CAS protocol configuration. At TP6310 When this parameter is enable the conference will disabled in case it's relevant. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: CASProtocolEnable" ::= {acCasConfig 1} acCASFile OBJECT IDENTIFIER ::= {acCasConfig 2} -- **************************************** -- acCASFile table declaration -- **************************************** acCASFileTable OBJECT-TYPE SYNTAX SEQUENCE OF AcCASFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acCASFile 1} -- **************************************** -- acCASFile table entry -- **************************************** acCASFileEntry OBJECT-TYPE SYNTAX AcCASFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acCASFileIndex} ::= {acCASFileTable 1} -- **************************************** -- acCASFile TABLE -- **************************************** AcCASFileEntry ::= SEQUENCE { acCASFileIndex Unsigned32, acCASFileName SnmpAdminString } acCASFileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Cas Table Indexd. AC INI-Param: N/A" ::= {acCASFileEntry 1} acCASFileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a pointer to the CAS filename index (0-7). The index is CASFileName_X. CASFileName_0 through to CASFileName_7 are the path and names of the CAS protocol configuration files. AC INI-Param: CASFILENAME" ::= {acCASFileEntry 2} acSonetSDH OBJECT IDENTIFIER ::= {acPSTNConfiguration 5} -- **************************************** -- acSonetSDH table declaration -- **************************************** acSonetSDHTable OBJECT-TYPE SYNTAX SEQUENCE OF AcSonetSDHEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acSonetSDH 1} -- **************************************** -- acSonetSDH table entry -- **************************************** acSonetSDHEntry OBJECT-TYPE SYNTAX AcSonetSDHEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acSonetSDHIndex} ::= {acSonetSDHTable 1} -- **************************************** -- acSonetSDH TABLE -- **************************************** AcSonetSDHEntry ::= SEQUENCE { acSonetSDHIndex Unsigned32, acSonetSDHFbrGrpMappingType INTEGER, acSonetSDHFbrGrpKlmNumberingScheme INTEGER, acSonetSDHFbrGrpAPSDirectionMode INTEGER, acSonetSDHFbrGrpAPSRevertMode INTEGER, acSonetSDHFbrGrpAPSWaitToRestoreTime Unsigned32 } acSonetSDHIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Fiber groupe index. AC INI-Param: N/A" ::= {acSonetSDHEntry 1} acSonetSDHFbrGrpMappingType OBJECT-TYPE SYNTAX INTEGER { asynchronousVT15andDS1(0) , asynchronousTU12andE1(1) , sTS1asynchronousDS3(3) , undefined(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects SDH/SONET mapping type (signal label + payload mapping type) for the PSTN interface. Generally per Fiber Group. Single Fiber Group supported in the PSTN interface of TP6310 and TP12610. Applicable only to the TP-6310 and TP-12610. Relevant only when acSysTDMBusType = acFRAMERS (2). 0 = Asynchronous VT1.5 and DS1 1 = Asynchronous TU12 and E1 3 = Asynchronous mapping of DS3 in STS1, DS3 channelized to DS1s 15 = Undefined Should be in coordination with other parameters as follows: - sonetMediumType - acTrunkProtocolType. Access: Offline. AC INI-Param: SDHFbrGrp_Mapping_Type" ::= {acSonetSDHEntry 2} acSonetSDHFbrGrpKlmNumberingScheme OBJECT-TYPE SYNTAX INTEGER { numberingScheme-MLK(0) , numberingScheme-LMK(1) , numberingScheme-KLM(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Provides VC/VT numbering scheme for STM-1/OC3 fiber group. Access: Offline. AC INI-Param: SDHFbrGrp_KLM_Numbering_Scheme" ::= {acSonetSDHEntry 3} acSonetSDHFbrGrpAPSDirectionMode OBJECT-TYPE SYNTAX INTEGER { unidirectional(0) , bidirectional(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Automatic Protection Switch Unidir/Bidir mode for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_DirMode" ::= {acSonetSDHEntry 4} acSonetSDHFbrGrpAPSRevertMode OBJECT-TYPE SYNTAX INTEGER { nonRevertive(0) , revertive(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Automatic Protection Switch Revertive mode for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_RevertMode" ::= {acSonetSDHEntry 5} acSonetSDHFbrGrpAPSWaitToRestoreTime OBJECT-TYPE SYNTAX Unsigned32 (5..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the APS Wait-to-restore time for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_WTR" ::= {acSonetSDHEntry 6} acPSTNStatus OBJECT IDENTIFIER ::= {acPSTN 2} acTrunkStatus OBJECT IDENTIFIER ::= {acPSTNStatus 1} -- **************************************** -- acTrunkStatus table declaration -- **************************************** acTrunkStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AcTrunkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acTrunkStatus 1} -- **************************************** -- acTrunkStatus table entry -- **************************************** acTrunkStatusEntry OBJECT-TYPE SYNTAX AcTrunkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acTrunkIndex} ::= {acTrunkStatusTable 1} -- **************************************** -- acTrunkStatus TABLE -- **************************************** AcTrunkStatusEntry ::= SEQUENCE { acTrunkStatusLedStatusColor INTEGER, acTrunkStatusLedStatusState INTEGER, acTrunkStatusChannels OCTET STRING, acTrunkStatusV5InterfaceNum Integer32, acTrunkStatusV5LinkID Integer32, acTrunkStatusDChannel INTEGER, acTrunkStatusAlarm INTEGER, acTrunkStatusDchannelActivity INTEGER } acTrunkStatusLedStatusColor OBJECT-TYPE SYNTAX INTEGER { off(0) , red(1) , green(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Trunk led status color. AC INI-Param: N/A" ::= {acTrunkStatusEntry 1} acTrunkStatusLedStatusState OBJECT-TYPE SYNTAX INTEGER { steady(0) , blink(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Trunk led status blinking rate. AC INI-Param: N/A" ::= {acTrunkStatusEntry 2} acTrunkStatusChannels OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Reperesents Trunk's Channels-Status. Each nibble (half Byte) presents one channel status, as following: 1 - invalid B-Channel. 2 - None. 3 - Open. 4 - Media. 5 - SS7. 6 - HDLC. 7 - DPNSS. 8 - CAS. 9 - Out Of Service. 10 - Maintenance. AC INI-Param: N/A" ::= {acTrunkStatusEntry 3} acTrunkStatusV5InterfaceNum OBJECT-TYPE SYNTAX Integer32 (-1..31) MAX-ACCESS read-only STATUS current DESCRIPTION "V5.2 interface containing this trunk. -1 means information not available or not relevant. AC INI-Param: N/A" ::= {acTrunkStatusEntry 4} acTrunkStatusV5LinkID OBJECT-TYPE SYNTAX Integer32 (-1..62) MAX-ACCESS read-only STATUS current DESCRIPTION "V5.2 link containing this trunk. -1 means information not available or not relevant. AC INI-Param: N/A" ::= {acTrunkStatusEntry 5} acTrunkStatusDChannel OBJECT-TYPE SYNTAX INTEGER { dChannelEstablished(0) , dChannelNotEstablished(1) , dChannelNotApplicable(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the trunk's D channel status. 0 - dChannelEstablished 1 - dChannelNotEstablished 10 - dChannelNotApplicable. AC INI-Param: N/A" ::= {acTrunkStatusEntry 6} acTrunkStatusAlarm OBJECT-TYPE SYNTAX INTEGER { greyDisabled(0) , greenActive(1) , redLosLof(2) , blueAis(3) , yellowRai(4) , orangeDChannel(5) , purpleLowerLayerDown(6) , darkOrangeNFASAlarm(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the trunk's alarm status. 0 - Disabled. 1 - Active - OK. 2 - LOS/LOF Alarm. 3 - AIS Alarm. 4 - RAI Alram. 5 - D-Channel Alarm. 6 - Lower Layer Down. 7 - NFAS Alarm. AC INI-Param: N/A" ::= {acTrunkStatusEntry 7} acTrunkStatusDchannelActivity OBJECT-TYPE SYNTAX INTEGER { dChannelActive(0) , dChannelStandby(1) , dChannelNotApplicable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines D-channel status. This parameter is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = Active channel 1 = Standby channel 2 = Not applicable (this trunk doesn’t have D-channel defined). AC INI-Param: N/A" ::= {acTrunkStatusEntry 8} acDigitalLegs OBJECT IDENTIFIER ::= {acPSTNStatus 2} -- **************************************** -- acDigitalLegs table declaration -- **************************************** acDigitalLegsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcDigitalLegsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acDigitalLegs 1} -- **************************************** -- acDigitalLegs table entry -- **************************************** acDigitalLegsEntry OBJECT-TYPE SYNTAX AcDigitalLegsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acDigitalLegsLegIndex} ::= {acDigitalLegsTable 1} -- **************************************** -- acDigitalLegs TABLE -- **************************************** AcDigitalLegsEntry ::= SEQUENCE { acDigitalLegsLegIndex Unsigned32, acDigitalLegsCallIndex Unsigned32, acDigitalLegsTrunk Unsigned32, acDigitalLegsBchannel Unsigned32, acDigitalLegsEchoCanceller INTEGER, acDigitalLegsDTMFDetection INTEGER, acDigitalLegsVoiceVolume Unsigned32, acDigitalLegsHighPassFilter INTEGER, acDigitalLegsInputGain INTEGER, acDigitalLegsDSPDevice Unsigned32, acDigitalLegsLegName SnmpAdminString } acDigitalLegsLegIndex OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Decribes The Digital EndPoint In A Call. AC INI-Param: N/A" ::= {acDigitalLegsEntry 1} acDigitalLegsCallIndex OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Decribes The Call which The Digital EndPoint Participant In It. AC INI-Param: N/A" ::= {acDigitalLegsEntry 2} acDigitalLegsTrunk OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Trunk the Leg belong to. AC INI-Param: N/A" ::= {acDigitalLegsEntry 3} acDigitalLegsBchannel OBJECT-TYPE SYNTAX Unsigned32 (0..76500) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Bchannel the Leg belong to. AC INI-Param: N/A" ::= {acDigitalLegsEntry 4} acDigitalLegsEchoCanceller OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enables or Disables the Echo Canceller. AC INI-Param: N/A" ::= {acDigitalLegsEntry 5} acDigitalLegsDTMFDetection OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enables or Disables the DTMF Detection. AC INI-Param: N/A" ::= {acDigitalLegsEntry 6} acDigitalLegsVoiceVolume OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-only STATUS current DESCRIPTION "Describs the volume of the voice in dB. AC INI-Param: N/A" ::= {acDigitalLegsEntry 7} acDigitalLegsHighPassFilter OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enables or Disables theHigh Pass Filter. AC INI-Param: N/A" ::= {acDigitalLegsEntry 8} acDigitalLegsInputGain OBJECT-TYPE SYNTAX INTEGER { disable(0) , enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Input Gain on the leg in dB. AC INI-Param: N/A" ::= {acDigitalLegsEntry 9} acDigitalLegsDSPDevice OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-only STATUS current DESCRIPTION "describes the DSP Device the Leg connected to. AC INI-Param: N/A" ::= {acDigitalLegsEntry 10} acDigitalLegsLegName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A" ::= {acDigitalLegsEntry 11} acSDHKLMNumberingScheme OBJECT IDENTIFIER ::= {acPSTNStatus 3} -- **************************************** -- acSDHKLMNumberingScheme table declaration -- **************************************** acSDHKLMNumberingSchemeTable OBJECT-TYPE SYNTAX SEQUENCE OF AcSDHKLMNumberingSchemeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acSDHKLMNumberingScheme 1} -- **************************************** -- acSDHKLMNumberingScheme table entry -- **************************************** acSDHKLMNumberingSchemeEntry OBJECT-TYPE SYNTAX AcSDHKLMNumberingSchemeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acSDHKLMNumberingSchemeTrunkIndex} ::= {acSDHKLMNumberingSchemeTable 1} -- **************************************** -- acSDHKLMNumberingScheme TABLE -- **************************************** AcSDHKLMNumberingSchemeEntry ::= SEQUENCE { acSDHKLMNumberingSchemeTrunkIndex Unsigned32, acSDHKLMNumberingSchemeTUG3OrSTS1 Unsigned32, acSDHKLMNumberingSchemeTUG2OrVTG Unsigned32, acSDHKLMNumberingSchemeTU12OrVT15 Unsigned32 } acSDHKLMNumberingSchemeTrunkIndex OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Number. AC INI-Param: N/A" ::= {acSDHKLMNumberingSchemeEntry 1} acSDHKLMNumberingSchemeTUG3OrSTS1 OBJECT-TYPE SYNTAX Unsigned32 (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION " AC INI-Param: N/A" ::= {acSDHKLMNumberingSchemeEntry 2} acSDHKLMNumberingSchemeTUG2OrVTG OBJECT-TYPE SYNTAX Unsigned32 (1..7) MAX-ACCESS read-only STATUS current DESCRIPTION " AC INI-Param: N/A" ::= {acSDHKLMNumberingSchemeEntry 3} acSDHKLMNumberingSchemeTU12OrVT15 OBJECT-TYPE SYNTAX Unsigned32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION " AC INI-Param: N/A" ::= {acSDHKLMNumberingSchemeEntry 4} acFiberGroupStatus OBJECT IDENTIFIER ::= {acPSTNStatus 4} acFiberGroupStatusActiveLink OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Fiber group active link number. 0 - there is no active fiber group link. AC INI-Param: N/A" ::= {acFiberGroupStatus 1} acNFASGroupStatus OBJECT IDENTIFIER ::= {acPSTNStatus 5} -- **************************************** -- acNFASGroupStatus table declaration -- **************************************** acNFASGroupStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AcNFASGroupStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= {acNFASGroupStatus 1} -- **************************************** -- acNFASGroupStatus table entry -- **************************************** acNFASGroupStatusEntry OBJECT-TYPE SYNTAX AcNFASGroupStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {acNFASGroupStatusIndex} ::= {acNFASGroupStatusTable 1} -- **************************************** -- acNFASGroupStatus TABLE -- **************************************** AcNFASGroupStatusEntry ::= SEQUENCE { acNFASGroupStatusIndex Unsigned32, acNFASGroupStatusGroupStatus INTEGER, acNFASGroupStatusPrimaryDChannel Integer32, acNFASGroupStatusBackupDChannel Integer32, acNFASGroupStatusAction INTEGER, acNFASGroupStatusActionResult SnmpAdminString, acNFASGroupStatusPrimaryDChannelActivity INTEGER, acNFASGroupStatusBackupDChannelActivity INTEGER } acNFASGroupStatusIndex OBJECT-TYPE SYNTAX Unsigned32 (1..12) MAX-ACCESS not-accessible STATUS current DESCRIPTION "NFAS Group Index. AC INI-Param: N/A" ::= {acNFASGroupStatusEntry 1} acNFASGroupStatusGroupStatus OBJECT-TYPE SYNTAX INTEGER { notExists(-1) , inService(0) , outOfService(1) , swactInProgress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of the NFAS group. AC INI-Param: N/A" ::= {acNFASGroupStatusEntry 2} acNFASGroupStatusPrimaryDChannel OBJECT-TYPE SYNTAX Integer32 (-1..83) MAX-ACCESS read-only STATUS current DESCRIPTION "The NFAS Group Configured Primary D-Channel. -1 means no D-channel Configured. AC INI-Param: N/A" ::= {acNFASGroupStatusEntry 3} acNFASGroupStatusBackupDChannel OBJECT-TYPE SYNTAX Integer32 (-1..83) MAX-ACCESS read-only STATUS current DESCRIPTION "The NFAS Group Configured Backup D-Channel. -1 means no D-channel Configured. AC INI-Param: N/A" ::= {acNFASGroupStatusEntry 4} acNFASGroupStatusAction OBJECT-TYPE SYNTAX INTEGER { actionDone(0) , switchOver(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Switches ISDN signaling from active to standby (backup) D-channel of the NFAS Group. Access: Instant. AC INI-Param: N/A" ::= {acNFASGroupStatusEntry 5} acNFASGroupStatusActionResult OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Action result. Includes action status (success, failure or notApplicable). AC INI-Param: N/A" ::= {acNFASGroupStatusEntry 6} acNFASGroupStatusPrimaryDChannelActivity OBJECT-TYPE SYNTAX INTEGER { dChannelActive(0) , dChannelStandby(1) , dChannelNotApplicable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines Primary D-channel status. This parameter is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = Active channel 1 = Standby channel 2 = Not applicable (this trunk doesn’t have D-channel defined). AC INI-Param: N/A" ::= {acNFASGroupStatusEntry 7} acNFASGroupStatusBackupDChannelActivity OBJECT-TYPE SYNTAX INTEGER { dChannelActive(0) , dChannelStandby(1) , dChannelNotApplicable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines Backup D-channel status. This parameter is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = Active channel 1 = Standby channel 2 = Not applicable (this trunk doesn’t have D-channel defined). AC INI-Param: N/A" ::= {acNFASGroupStatusEntry 8} END