AcPerfH323SIPGateway DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI enterprises FROM SNMPv2-SMI; audioCodes OBJECT IDENTIFIER ::= {enterprises 5003} acRegistrations OBJECT IDENTIFIER ::= {audioCodes 7} acGeneric OBJECT IDENTIFIER ::= {audioCodes 8} acProducts OBJECT IDENTIFIER ::= {audioCodes 9} acPerformance OBJECT IDENTIFIER ::= {audioCodes 10} acPerfH323SIPGateway MODULE-IDENTITY LAST-UPDATED "200511031451Z" --Thursday, November 03, 2005 ORGANIZATION "AudioCodes Ltd" CONTACT-INFO "Postal: AudioCodes LTD 4 Horesh Road Yehud 56470, ISRAEL Tel: 972-3-5394000 Email: support@audiocodes.com" DESCRIPTION "This MIB defines the enterprise-specific objects needed to support performance management of the AudioCodes product. Performance measurements are grouped into the following MIB trees: acPerfIvr - performance measurements related to the IVR service acPerfBct - performance measurements related to the BCT service acPerfConf - performance measurements related to the Conferencing service acPerfTt - performance measurements related to the Test Trunk service" REVISION "200311200000Z" DESCRIPTION "Version 4.4. November 20, 2003. Made these changes: o Initial revision" ::= {acPerformance 3} -- -- Abbreviations used: -- Annc announcement(s) -- IVR Interactive Voice Response -- Conf Conferencing -- NE network element -- TT Test Trunks -- -- The following conventions are used in this MIB: -- The "Product" attribute lists the products in which the -- performance measurement is maintained. Current products -- are: -- -- Media Servers -- IPmedia 2000 -- Media Gateways -- Mediant 2000/5000/8000 (wireline) -- Stretto 2000/5000/8000 (wireless) -- -- The "Capabilities" attribute lists the capabilities that must be -- configured on the system for the performance measurement to be -- maintained. The possible values are IVR, Conferencing, BCT, TT -- and Trunking Gateway. Some performance measurements are not -- related to any particular capabilities. In those cases, the value -- of Capabilities attribute is "All". -- -- Notes on IVR Service Performance Measurements -- -- In response to a request to play an announcement, the media server -- may play multiple audio segments. The media server maintains -- performance data for the overall announcement request as well as -- for the individual segments. -- In naming of the performance measurements, "Play" is used to refer -- to the overall announcement request. "PlaySegment" is used to refer -- to the playing of an individual segment. -- -- Notes on Play Collect -- -- Play Collect involves playing of an initial prompt, collection of digits, followed -- by actions which are dependent on the digits (or lack of digits) that are collected. -- These are the prompts that can be specified (all are optional): -- -- ip initial prompt -- nd no digits reprompt (if not specified, use rp) -- rp reprompt (if not specified, use ip) -- fa failure, played once at end -- sa success, played once at end -- -- The request can specify the number of attempts, before playing the fa prompt. If no -- number of attempts value is supplied on the request, then a default is used. -- -- The prompts can be either simple or complex announcements. -- -- Continuous Digit Collect operations, which can be considered a special type of play -- collect, are not tracked by any of the acPlayCollect performance measurements, -- but are instead tracked in a special group of performance measurements. -- -- Notes on Continuous Digit Collect -- -- Continuous Digit Collect - Digits are collected during the entire -- life of a call. No prompts are played. Continuous Digit Collect -- is typically used in a BCT call. -- -- Continuous Digit Collect operations can be considered a special type of play -- collect, but are not tracked by any of the acPlayCollect performance measurements. acPerfH323SIPGWCommon OBJECT IDENTIFIER ::= {acPerfH323SIPGateway 1} acPerfH323SIPGWCalls OBJECT IDENTIFIER ::= {acPerfH323SIPGWCommon 1} acPerfTel2IP OBJECT IDENTIFIER ::= {acPerfH323SIPGWCalls 1} acPerfTel2IPAttemptedCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Attempted SIP/H323 calls." ::= {acPerfTel2IP 1} acPerfTel2IPEstablishedCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of established (connected and voice activated) SIP/H323 calls." ::= {acPerfTel2IP 2} acPerfTel2IPBusyCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Destination Busy SIP/H323 calls." ::= {acPerfTel2IP 3} acPerfTel2IPNoAnswerCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of No Answer SIP/H323 calls." ::= {acPerfTel2IP 4} acPerfTel2IPNoRouteCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of No Route SIP/H323 calls. Most likely to be due to wrong number." ::= {acPerfTel2IP 5} acPerfTel2IPNoMatchCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of No capability match between peers on SIP/H323 calls." ::= {acPerfTel2IP 6} acPerfTel2IPFailCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fax attempted SIP/H323 calls." ::= {acPerfTel2IP 7} acPerfTel2IPFaxAttemptedCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Attempted SIP/H323 calls." ::= {acPerfTel2IP 8} acPerfTel2IPFaxSuccessCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Attempted SIP/H323 fax success calls." ::= {acPerfTel2IP 9} acPerfTel2IPTotalDuration OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "total duration of SIP/H323 calls." ::= {acPerfTel2IP 10} acPerfIP2Tel OBJECT IDENTIFIER ::= {acPerfH323SIPGWCalls 2} acPerfIP2TelAttemptedCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Attempted SIP/H323 calls." ::= {acPerfIP2Tel 1} acPerfIP2TelEstablishedCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of established (connected and voice activated) SIP/H323 calls." ::= {acPerfIP2Tel 2} acPerfIP2TelBusyCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Destination Busy SIP/H323 calls." ::= {acPerfIP2Tel 3} acPerfIP2TelNoAnswerCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of No Answer SIP/H323 calls." ::= {acPerfIP2Tel 4} acPerfIP2TelNoRouteCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of No Route SIP/H323 calls. Most likely to be due to wrong number." ::= {acPerfIP2Tel 5} acPerfIP2TelNoMatchCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of No capability match between peers on SIP/H323 calls." ::= {acPerfIP2Tel 6} acPerfIP2TelFailCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fax attempted SIP/H323 calls." ::= {acPerfIP2Tel 7} acPerfIP2TelFaxAttemptedCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Attempted SIP/H323 calls." ::= {acPerfIP2Tel 8} acPerfIP2TelFaxSuccessCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Attempted SIP/H323 fax success calls." ::= {acPerfIP2Tel 9} acPerfIP2TelTotalDuration OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "total duration of SIP/H323 calls." ::= {acPerfIP2Tel 10} END