-- **************************************************************************** -- aviatSwManagement.mib: Aviat Networks Software Management MIB -- -- Copyright © 2014 Aviat U.S, Inc. All rights reserved. -- Certain information and content may be provided by third parties to AVIAT, -- and in each case, such copyrighted work remains the property of that third -- party creator/licensor. -- All rights not expressly granted herein are reserved. Except as otherwise -- required by applicable law, any reproduction, distribution, modification, -- retransmission, or publication of any copyrighted material is strictly -- prohibited without the express written consent of the copyright owner. -- "AVIAT", "AVIAT NETWORKS" and the AVIAT logo are trademarks of Aviat -- Networks, Inc. All other trademarks or brand names may be trademarks or -- registered trademarks of AVIAT's affiliated companies in the United States -- and/or other countries. -- -- **************************************************************************** AVIAT-SWMANAGEMENT-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString, DateAndTime FROM SNMPv2-TC Integer32, MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF aviatModules FROM STXN-GLOBALREGISTER-MIB; aviatSwManagementModule MODULE-IDENTITY LAST-UPDATED "201401210157Z" ORGANIZATION "Aviat Networks" CONTACT-INFO "Aviat Networks Customer Service Postal: 5200 Great America Parkway Santa Clara California 95054 United States of America Tel: 408 567 7000 E-mail: mibsupport@aviatnet.com" DESCRIPTION "This MIB defines the interface for software loading, soft reset and software details retrieval." REVISION "201401210157Z" DESCRIPTION "Initial Version." ::= { aviatModules 11 } -- **************************************************************************** -- Conformance area, containing groups and compliance specifications -- **************************************************************************** aviatSwManagementConf OBJECT IDENTIFIER ::= { aviatSwManagementModule 1 } aviatSwManagementGroups OBJECT IDENTIFIER ::= { aviatSwManagementConf 1 } aviatSwManagementCompliance OBJECT IDENTIFIER ::= { aviatSwManagementConf 2 } -- **************************************************************************** -- Sub-tree for Software Management MIB objects -- **************************************************************************** aviatSwManagementMIBObjects OBJECT IDENTIFIER ::= { aviatSwManagementModule 2 } aviatSwResetObjects OBJECT IDENTIFIER ::= { aviatSwManagementMIBObjects 1 } aviatSwLoadObjects OBJECT IDENTIFIER ::= { aviatSwManagementMIBObjects 2 } aviatSwDetailsObjects OBJECT IDENTIFIER ::= { aviatSwManagementMIBObjects 3 } -- **************************************************************************** -- Software Reset MIB objects -- **************************************************************************** aviatSmSoftReset OBJECT-TYPE SYNTAX INTEGER { resetNone (0), resetSoft (1), resetHard (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the control to perform a software reset on the product. When set to resetSoft(1) a soft reset will be performed. When set to resetHard(2) a full system reset will be performed, with all reinitialisation carried out. Setting to resetNone(0) has no effect." ::= { aviatSwResetObjects 1 } -- **************************************************************************** -- Software Loading MIB objects -- **************************************************************************** aviatSmLoadControl OBJECT-TYPE SYNTAX INTEGER { abort (0), load (1), activate (2), loadAndActivate (3), rollback (4), forceLoad (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The software loading process may be controlled using this object. Setting the value load(1) will begin transfer of the specified file from the external URI to the unit. If the file is a manifest, this will initiate transfer of all referenced files. When this procedure has completed, aviatSmLoadStatus will indicate loadOk(6) for success, or loadError(10) for failure. An unresolvable incompatibility error is indicated by compatibilityError(13) and should be followed by an abort(0). A successful software (loadOk) load may be activated by setting the value to activate(2). If the delayed/timed activation objects are disabled this will have an immediate effect, otherwise the activation will take place as scheduled. A successful activation will result in an aviatSmLoadStatus value of activateOk(7). An error will be indicated by the value activateError(11). If the value is idle(7) and no software load process has been initiated since the last successful activation, the inactive software can be re-activated by setting the value to rollback(4). Success is indicated in aviatSmLoadStatus by rollbackOk(8) and failure by rollbackError(12). Setting the value to loadAndActivate(3) will begin software transfer. A successful transfer will be followed by software activation which is controlled by the delayed/timed activation objects. Success will be indicated in aviatSmLoadStatus by activateOk(7). A pending scheduled activation is indicated by waitingToActivate(13)." ::= { aviatSwLoadObjects 1 } aviatSmLoadStatus OBJECT-TYPE SYNTAX INTEGER { abort (0), load (1), commit (2), activate (3), rollback (4), idle (5), loadOk (6), activateOk (7), rollbackOk (8), compatibilityError (9), loadError (10), activateError (11), rollbackError (12), waitingToActivate (13), sameVersion (14) } MAX-ACCESS read-only STATUS current DESCRIPTION "The software loading process may be monitored using this object. See the aviatSmLoadControl object description for more details." ::= { aviatSwLoadObjects 2 } aviatSmLoadRollbackDuration OBJECT-TYPE SYNTAX Integer32 ( 0..2147483647 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the duration, in seconds, from which the 'sw load rollback timer' will count down when it is started." ::= { aviatSwLoadObjects 3 } aviatSmLoadRollbackTimer OBJECT-TYPE SYNTAX Integer32 ( -1..2147483647 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the control and counter of the 'sw load rollback timer'. When set to -1, the timer is stopped and disabled. When set to 0, the timer assumes an 'instant timeout'. Otherwise, this object will indicate the time left on the timer. The timer is automatically started whenever the software starts up following a software load activation. When this timer reaches zero, the 'sw load manager' of the system will roll back the software to its previous version." ::= { aviatSwLoadObjects 4 } aviatSmLoadActivateWaitDuration OBJECT-TYPE SYNTAX Integer32 ( 0..2147483647 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the duration, in seconds, from which the 'sw load activate wait timer' will count down when it is started." ::= { aviatSwLoadObjects 5 } aviatSmLoadActivateWaitTimer OBJECT-TYPE SYNTAX Integer32 ( -1..2147483647 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the control and counter of the 'sw load activate wait timer'. When set to -1, the timer is stopped and disabled. When set to 0, the timer assumes an 'instant timeout'. Otherwise, this object will indicate the time left on the timer. This timer is loaded with the lesser of aviatSmLoadActivateWaitDuration (if non-zero), or the time in seconds until aviatSmLoadActivateTime occurs (if set) when the activate(2) state is entered. When this timer reaches zero, the 'sw load manager' of the system will activate the loaded software." ::= { aviatSwLoadObjects 6 } aviatSmLoadActivateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "This determines the date and time at which to activate the loaded software. The 'sw load manager' of the system shall activate the loaded software when the current system time reaches or is past this setting." ::= { aviatSwLoadObjects 7 } aviatSmLoadUri OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0..1024 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of the manifest for software loading." ::= { aviatSwLoadObjects 8 } aviatSmLoadProgress OBJECT-TYPE SYNTAX Integer32 ( 0..100 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage progress of the current sofware load. It is only meaningful during load and commit, and will return zero otherwise." ::= { aviatSwLoadObjects 9 } -- **************************************************************************** -- Software Details MIB objects -- **************************************************************************** aviatSmDetailsVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0..32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of currently running software." ::= { aviatSwDetailsObjects 1 } aviatSmDetailsInactiveVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0..32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the inactive software." ::= { aviatSwDetailsObjects 2 } -- **************************************************************************** -- The Object and Event Groups -- **************************************************************************** aviatSwResetGroup OBJECT-GROUP OBJECTS { aviatSmSoftReset } STATUS current DESCRIPTION "These are the software reset objects." ::= { aviatSwManagementGroups 1 } aviatSwLoadGroup OBJECT-GROUP OBJECTS { aviatSmLoadControl, aviatSmLoadStatus, aviatSmLoadRollbackDuration, aviatSmLoadRollbackTimer, aviatSmLoadActivateWaitDuration, aviatSmLoadActivateWaitTimer, aviatSmLoadActivateTime, aviatSmLoadUri, aviatSmLoadProgress } STATUS current DESCRIPTION "These are the objects for software loading." ::= { aviatSwManagementGroups 2 } aviatSwDetailsGroup OBJECT-GROUP OBJECTS { aviatSmDetailsVersion, aviatSmDetailsInactiveVersion } STATUS current DESCRIPTION "These are the software details objects." ::= { aviatSwManagementGroups 3 } -- **************************************************************************** -- The Compliance Specifications -- **************************************************************************** aviatSwManagementComplV1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The implementation requirements for this MIB." MODULE -- This module MANDATORY-GROUPS { aviatSwResetGroup, aviatSwLoadGroup, aviatSwDetailsGroup } ::= { aviatSwManagementCompliance 1 } END