-------------------------------------------------------------------------------- -- Avocent ACS MIB -- Copyright 2009 Avocent Corporation -- Revision: 2.0.1 -- Last Modified: October 10, 2010 -------------------------------------------------------------------------------- ACS-MIB DEFINITIONS ::= BEGIN IMPORTS Gauge,TimeTicks,IpAddress,Counter,NetworkAddress FROM RFC1155-SMI PhysAddress FROM RFC1213-MIB enterprises, MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB TRAP-TYPE FROM RFC-1215; -------------------------------------------------------------------------------- -- Object Groupings -------------------------------------------------------------------------------- --@ Note: every product type should be uniquely identified underneath the --@ acsProducts object group. Each product should report its unique acsProducts --@ OBJECT IDENTIFIER in mib-2.system.sysObjectID. Please see the file --@ "_Avocent Enterprise Object Identifier Assignment.txt" for a list of the --@ IDs that have been assigned. -- enterprises .1.3.6.1.4.1 -- avocent OBJECT IDENTIFIER ::= { enterprises 10418 } acs MODULE-IDENTITY LAST-UPDATED "201010100000Z" ORGANIZATION "Avocent Corporation" CONTACT-INFO "postal : Avocent Corporation 47281 Bayside Parkway Fremont, CA 94538, USA e-mail : Technical Support techsupport@avocent.com" DESCRIPTION "This module defines the Avocent MIB extensions to ACS60xx products." REVISION "201010100000Z" DESCRIPTION "Add products acs6004 and acs6008" REVISION "200912110000Z" DESCRIPTION "Extended acsPowerMgmt to support data monitoring and Avocent PM-PDUs" REVISION "200709170000Z" DESCRIPTION "First Draft" ::= { enterprises 10418 16 } acsProducts OBJECT IDENTIFIER ::= { acs 1 } acsManagement OBJECT IDENTIFIER ::= { acs 2 } -- acs6016 OBJECT IDENTIFIER ::= { acsProducts 1 } -- 10418.16.1.1 acs6032 OBJECT IDENTIFIER ::= { acsProducts 2 } -- 10418.16.1.2 acs6048 OBJECT IDENTIFIER ::= { acsProducts 3 } -- 10418.16.1.3 acs6004 OBJECT IDENTIFIER ::= { acsProducts 4 } -- 10418.16.1.4 acs6008 OBJECT IDENTIFIER ::= { acsProducts 5 } -- 10418.16.1.5 acsAppliance OBJECT IDENTIFIER ::= { acsManagement 1 } -- 10418.16.2.1 acsSessions OBJECT IDENTIFIER ::= { acsManagement 2 } -- 10418.16.2.2 acsSerialPort OBJECT IDENTIFIER ::= { acsManagement 3 } -- 10418.16.2.3 acsPowerMgmt OBJECT IDENTIFIER ::= { acsManagement 5 } -- 10418.16.2.5 -- objects under acsPowerMgmt -- acsPowerMgmtNumSerialPorts ::= { acsPowerMgmt 1 } -- acsPowerMgmtSerialTable ::= { acsPowerMgmt 2 } -- acsPowerMgmtPDUTable ::= { acsPowerMgmt 3 } -- acsPowerMgmtTotalNumberOfOutlets ::= { acsPowerMgmt 4 } -- acsPowerMgmtOutletsTable ::= { acsPowerMgmt 5 } -- acsPowerMgmtNumberOfOutletGroup ::= { acsPowerMgmt 6 } -- acsPowerMgmtGroupTable ::= { acsPowerMgmt 7 } -- acsPowerMgmtPhasesTable ::= { acsPowerMgmt 8 } -- acsPowerMgmtBanksTable ::= { acsPowerMgmt 9 } -- acsPowerMgmtEnvMonTable ::= { acsPowerMgmt 10 } -- acsPowerMgmtOutElecMonTable ::= { acsPowerMgmt 11 } -- -- Note that traps are defined in a separate trap MIB -- acsTrapObject OBJECT IDENTIFIER ::= { acsManagement 6 } -- 10418.16.2.6 -- -- Type Definitions -- -- -- Each enumeration represents the states of the appliance power supplies. PowerSupplyState ::= INTEGER { statePowerOn(1), statePowerOff(2), powerNotInstaled(9999) } -- -- Each enumeration represents the speed of the serial port. SerialPortSpeed ::= INTEGER { speed300bps(300), speed600bps(600), speed1200bps(1200), speed2400bps(2400), speed4800bps(4800), speed9600bps(9600), speed19200bps(19200), speed38400bps(38400), speed57600bps(57600), speed115200bps(115200), speed230400bps(230400), speed460800bps(460800) } -- -- Each enumeration represents the state of the RS-232C signal. SerialPortSignalState ::=INTEGER { up(1), down(2) } -- -- Each enumeration represents the RJ-45 pin-out SerialPortPinOut ::=INTEGER { cyclades(1), cisco(2) } -- -- acsAppliance -- OBJECT IDENTIFIER ::= { acsManagement 1 } 10418.16.2.1 -- acsHostName OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The appliance name" ::= { acsAppliance 1 } acsProductModel OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..50) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The appliance product model" ::= { acsAppliance 2 } acsPartNumber OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The part number of this appliance as shown on the label attached or imprinted on the appliance." ::= { acsAppliance 3 } acsSerialNumber OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of this appliance as shown on the label attached or imprinted on the appliance." ::= { acsAppliance 4 } acsEIDNumber OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The electronic ID number (EID) of this appliance as shown on the label attached or imprinted on the appliance." ::= { acsAppliance 5 } acsBootcodeVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the bootcode of this appliance." ::= { acsAppliance 6 } acsFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the firmware of this appliance." ::= { acsAppliance 7 } acsPowerSupply OBJECT-IDENTITY STATUS current DESCRIPTION "It gives information about Power Supply of this appliance" ::= { acsAppliance 8 } acsPowerSupplyNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of the power supplies of this appliance" ::= { acsPowerSupply 1 } acsPowerSupplyStatePw1 OBJECT-TYPE SYNTAX PowerSupplyState MAX-ACCESS read-only STATUS current DESCRIPTION "State of the first power supply" ::= { acsPowerSupply 2 } acsPowerSupplyStatePw2 OBJECT-TYPE SYNTAX PowerSupplyState MAX-ACCESS read-only STATUS current DESCRIPTION "State of the second power supply" ::= { acsPowerSupply 3 } acsReboot OBJECT-TYPE SYNTAX INTEGER { noAction(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A set value of reboot(2) will reboot the appliance. noAction(1) = always returned in a GET. Does nothing if SET. reboot(2) = when SET the appliance immediately reboots." ::= { acsAppliance 9 } -- -- acsSessions -- OBJECT IDENTIFIER ::= { acsManagement 2 } 10418.16.2.2 -- acsActiveSessionsNumberOfSession OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active sessions." ::= { acsSessions 1 } acsActiveSessionsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsActiveSessionsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of active sessions." ::= { acsSessions 2 } acsActiveSessionsTableEntry OBJECT-TYPE SYNTAX AcsActiveSessionsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "each entry has the information about the active session" INDEX { acsActiveSessionsTableIndex } ::= { acsActiveSessionsTable 1 } AcsActiveSessionsTableEntry ::= SEQUENCE { acsActiveSessionsTableIndex InterfaceIndexOrZero, acsActiveSessionsTableUser DisplayString, -- user name acsActiveSessionsTableGroup DisplayString, -- group name acsActiveSessionsTableType DisplayString, -- RO/RW-ssh,telnet or web acsActiveSessionsTableConnection DisplayString, -- type + target name acsActiveSessionsTableSessionTime DisplayString, -- time of session acsActiveSessionsTableFrom DisplayString, -- source of the session acsActiveSessionsTableKill INTEGER } acsActiveSessionsTableIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "A unique index representing an entry in this table." ::= { acsActiveSessionsTableEntry 1 } acsActiveSessionsTableUser OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the user that opens this session." ::= { acsActiveSessionsTableEntry 2 } acsActiveSessionsTableGroup OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the group that the user belongs to." ::= { acsActiveSessionsTableEntry 3 } acsActiveSessionsTableType OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The session type." ::= { acsActiveSessionsTableEntry 4 } acsActiveSessionsTableConnection OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Connection type." ::= { acsActiveSessionsTableEntry 5 } acsActiveSessionsTableSessionTime OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the session" ::= { acsActiveSessionsTableEntry 6 } acsActiveSessionsTableFrom OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The source IP address of the session." ::= { acsActiveSessionsTableEntry 7 } acsActiveSessionsTableKill OBJECT-TYPE SYNTAX INTEGER { noAction(1), killSession(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A set value of killSession(2) will kill the session. noAction(1) = always returned in a GET. Does nothing if SET. killSession(2)= when SET the appliance immediately kills the session." ::= { acsActiveSessionsTableEntry 8 } -- -- acsSerialPort -- OBJECT IDENTIFIER ::= { acsManagement 3 } 10418.16.2.3 -- acsSerialPortNumberOfPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Serial Ports (physical serial port plus Aux Port." ::= { acsSerialPort 1 } acsSerialPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsSerialPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about serial ports." ::= { acsSerialPort 2 } acsSerialPortTableEntry OBJECT-TYPE SYNTAX AcsSerialPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "each entry has the information about specific serial port." INDEX { acsSerialPortTableNumber } ::= { acsSerialPortTable 1 } AcsSerialPortTableEntry ::= SEQUENCE { acsSerialPortTableNumber Integer32, -- serial port number acsSerialPortTableDeviceName DisplayString, -- associated device name acsSerialPortTableStatus INTEGER, -- status of serial port acsSerialPortTableName DisplayString, -- associated name acsSerialPortTableProfile INTEGER, -- configured profile acsSerialPortTablePinOut SerialPortPinOut, -- configure RJ45 pin-out acsSerialPortTableComSpeed SerialPortSpeed, -- configured speed acsSerialPortTableComParity INTEGER, -- configured parity acsSerialPortTableComDataSize Integer32, -- configured data size acsSerialPortTableComStopBits Integer32, -- configured stop bits acsSerialPortTableComFlowControl INTEGER, -- configured flow control acsSerialPortTableSignalStateDTR SerialPortSignalState, -- state of DTR RS-232C signal acsSerialPortTableSignalStateDCD SerialPortSignalState, -- state of DCD RS-232C signal acsSerialPortTableSignalStateRTS SerialPortSignalState, -- state of RTS RS-232C signal acsSerialPortTableSignalStateCTS SerialPortSignalState, -- state of CTS RS-232C signal acsSerialPortTableTxBytes Integer32, -- number of transmitted bytes acsSerialPortTableRxBytes Integer32, -- number of received bytes acsSerialPortTableFrameError Integer32, -- number of detected frame errors acsSerialPortTableParityError Integer32, -- number of detected parity errors acsSerialPortTableBreak Integer32, -- number of detected break acsSerialPortTableOverrun Integer32 -- number of detected overrun errors } acsSerialPortTableNumber OBJECT-TYPE SYNTAX Integer32 (1..49) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique index representing an entry in this table. It is the number of the serial port. For AUX port, the number will be the number of physical serial ports plus 1." ::= { acsSerialPortTableEntry 1 } acsSerialPortTableDeviceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated device name for the serial port." ::= { acsSerialPortTableEntry 2 } acsSerialPortTableStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), idle(2), inUse(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the serial port: disabled(1) = it was configured as disable. idle(2) = there is not any session opened in this port. inUse(3) = there is session(s) opened in this port." ::= { acsSerialPortTableEntry 3 } acsSerialPortTableName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name associated with this serial port." ::= { acsSerialPortTableEntry 4 } acsSerialPortTableProfile OBJECT-TYPE SYNTAX INTEGER { casProfile(1), tsProfile(2), dialInProfile(3), powerProfile(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Configured profile for this serial port." ::= { acsSerialPortTableEntry 5 } acsSerialPortTablePinOut OBJECT-TYPE SYNTAX SerialPortPinOut MAX-ACCESS read-only STATUS current DESCRIPTION "RJ45 Pin-out configured for this serial port." ::= { acsSerialPortTableEntry 6 } acsSerialPortTableComSpeed OBJECT-TYPE SYNTAX SerialPortSpeed MAX-ACCESS read-only STATUS current DESCRIPTION "Speed configured for this serial port." ::= { acsSerialPortTableEntry 7 } acsSerialPortTableComParity OBJECT-TYPE SYNTAX INTEGER { none(1), odd(2), even(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Parity configured for this serial port." ::= { acsSerialPortTableEntry 8 } acsSerialPortTableComDataSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data Size configured for this serial port." ::= { acsSerialPortTableEntry 9 } acsSerialPortTableComStopBits OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Stop Bits configured for this serial port." ::= { acsSerialPortTableEntry 10 } acsSerialPortTableComFlowControl OBJECT-TYPE SYNTAX INTEGER { none(1), hardware(2), software(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Flow Control configured for this serial port." ::= { acsSerialPortTableEntry 11 } acsSerialPortTableSignalStateDTR OBJECT-TYPE SYNTAX SerialPortSignalState MAX-ACCESS read-only STATUS current DESCRIPTION "State of the DTR RS-232C signal." ::= { acsSerialPortTableEntry 12 } acsSerialPortTableSignalStateDCD OBJECT-TYPE SYNTAX SerialPortSignalState MAX-ACCESS read-only STATUS current DESCRIPTION "State of the DCD RS-232C signal." ::= { acsSerialPortTableEntry 13 } acsSerialPortTableSignalStateRTS OBJECT-TYPE SYNTAX SerialPortSignalState MAX-ACCESS read-only STATUS current DESCRIPTION "State of the RTS RS-232C signal." ::= { acsSerialPortTableEntry 14 } acsSerialPortTableSignalStateCTS OBJECT-TYPE SYNTAX SerialPortSignalState MAX-ACCESS read-only STATUS current DESCRIPTION "State of the CTS RS-232C signal." ::= { acsSerialPortTableEntry 15 } acsSerialPortTableTxBytes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmited bytes by the serial port." ::= { acsSerialPortTableEntry 16 } acsSerialPortTableRxBytes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received bytes by the serial port." ::= { acsSerialPortTableEntry 17 } acsSerialPortTableFrameError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frame error detected in the serial port." ::= { acsSerialPortTableEntry 18 } acsSerialPortTableParityError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of parity error detected in the serial port." ::= { acsSerialPortTableEntry 19 } acsSerialPortTableBreak OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of break detected in the serial port." ::= { acsSerialPortTableEntry 20 } acsSerialPortTableOverrun OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of overrun error detected in the serial port." ::= { acsSerialPortTableEntry 21 } -- -- acsPowerMgmt -- OBJECT IDENTIFIER ::= { acsManagement 5 } 10418.16.2.5 -- acsPowerMgmtNumSerialPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Serial Ports that has PDU connected on the appliance." ::= { acsPowerMgmt 1 } acsPowerMgmtSerialTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsPowerMgmtSerialTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about each serial port thas has PDU connect." ::= { acsPowerMgmt 2 } acsPowerMgmtSerialTableEntry OBJECT-TYPE SYNTAX AcsPowerMgmtSerialTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about each serial port thas has PDU connect." INDEX { acsPowerMgmtSerialTableIndex } ::= { acsPowerMgmtSerialTable 1 } AcsPowerMgmtSerialTableEntry ::= SEQUENCE { acsPowerMgmtSerialTableIndex InterfaceIndex, acsPowerMgmtSerialTablePortNumber Integer32, acsPowerMgmtSerialTableDeviceName DisplayString, acsPowerMgmtSerialTableNumberPDUs Integer32 } acsPowerMgmtSerialTableIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the register." ::= { acsPowerMgmtSerialTableEntry 1 } acsPowerMgmtSerialTablePortNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the serial port when the PDU is connected." ::= { acsPowerMgmtSerialTableEntry 2 } acsPowerMgmtSerialTableDeviceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The device name of this serial port." ::= { acsPowerMgmtSerialTableEntry 3 } acsPowerMgmtSerialTableNumberPDUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of units connected in this serial port." ::= { acsPowerMgmtSerialTableEntry 4 } acsPowerMgmtPDUTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsPowerMgmtPDUTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of detected PDUs." ::= { acsPowerMgmt 3 } acsPowerMgmtPDUTableEntry OBJECT-TYPE SYNTAX AcsPowerMgmtPDUTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "each entry has the information about the PDU." INDEX { acsPowerMgmtPDUTablePortNumber, acsPowerMgmtPDUTablePduIndex } ::= { acsPowerMgmtPDUTable 1 } AcsPowerMgmtPDUTableEntry ::= SEQUENCE { acsPowerMgmtPDUTablePortNumber InterfaceIndex, -- number of serial port acsPowerMgmtPDUTablePduIndex InterfaceIndexOrZero, acsPowerMgmtPDUTablePduId DisplayString, -- PDU identification acsPowerMgmtPDUTablePortName DisplayString, -- Serial Port Name acsPowerMgmtPDUTableModel DisplayString, -- PDU model acsPowerMgmtPDUTableVendor DisplayString, -- Vendor acsPowerMgmtPDUTableFirmwareVersion DisplayString, -- Firmware Version acsPowerMgmtPDUTableNumberOfOutlets Integer32, acsPowerMgmtPDUTableCurrentNOS Integer32, -- OBSOLETED number of current sensors acsPowerMgmtPDUTableCurrent1Value Integer32, -- OBSOLETED actual value for current of the sensor 1 acsPowerMgmtPDUTableCurrent1Max Integer32, -- OBSOLETED max value for current of the sensor 1 acsPowerMgmtPDUTableCurrent2Value Integer32, -- OBSOLETED actual value for current of the sensor 2 acsPowerMgmtPDUTableCurrent2Max Integer32, -- OBSOLETED max value for current of the sensor 2 acsPowerMgmtPDUTableCurrent3Value Integer32, -- OBSOLETED actual value for current of the sensor 3 acsPowerMgmtPDUTableCurrent3Max Integer32, -- OBSOLETED max value for current of the sensor 3 acsPowerMgmtPDUTableTemperatureNOS Integer32, -- OBSOLETED number of temperature sensors acsPowerMgmtPDUTableTemperature1Value Integer32, -- OBSOLETED actual value for Temperature 1 acsPowerMgmtPDUTableTemperature1Max Integer32, -- OBSOLETED max value for Temperature 1 acsPowerMgmtPDUTableTemperature2Value Integer32, -- OBSOLETED actual value for Temperaturet 2 acsPowerMgmtPDUTableTemperature2Max Integer32, -- OBSOLETED max value for Temperature 2 acsPowerMgmtPDUTableTemperature3Value Integer32, -- OBSOLETED actual value for Temperature 3 acsPowerMgmtPDUTableTemperature3Max Integer32, -- OBSOLETED max value for Temperature 3 acsPowerMgmtPDUTableHumidityNOS Integer32, -- OBSOLETED humidity number of humidity sensors acsPowerMgmtPDUTableHumidity1Value Integer32, -- OBSOLETED actual value for Humidity of the sensor 1 acsPowerMgmtPDUTableHumidity1Max Integer32, -- OBSOLETED max value for Humidityof the sensor 1 acsPowerMgmtPDUTableHumidity2Value Integer32, -- OBSOLETED actual value for Humidity of the sensor 2 acsPowerMgmtPDUTableHumidity2Max Integer32, -- OBSOLETED max value for Humidity of the sensor 2 acsPowerMgmtPDUTableHumidity3Value Integer32, -- OBSOLETED actual value for Humidity of the sensor 3 acsPowerMgmtPDUTableHumidity3Max Integer32, -- OBSOLETED max value for Humidity of the sensor 3 acsPowerMgmtPDUTableVoltageNOS Integer32, -- OBSOLETED number of voltage sensor acsPowerMgmtPDUTableVoltage1Value Integer32, -- OBSOLETED actual value for Voltage of the sensor 1 acsPowerMgmtPDUTableVoltage1Max Integer32, -- OBSOLETED max value for Voltage of the sensor 1 acsPowerMgmtPDUTableVoltage2Value Integer32, -- OBSOLETED actual value for Voltage of the sensor 2 acsPowerMgmtPDUTableVoltage2Max Integer32, -- OBSOLETED max value for Voltaget of the sensor 2 acsPowerMgmtPDUTableVoltage3Value Integer32, -- OBSOLETED actual value for Voltage of the sensor 3 acsPowerMgmtPDUTableVoltage3Max Integer32, -- OBSOLETED max value for Voltage of the sensor 3 acsPowerMgmtPDUTableNumberOfPhases Integer32, -- number of phases (single or 3-phases) acsPowerMgmtPDUTableNumberOfBanks Integer32, -- number of banks acsPowerMgmtPDUTableCurrentValue Integer32, -- actual value of PDU current sensor acsPowerMgmtPDUTableCurrentMax Integer32, -- max detected value of current sensor acsPowerMgmtPDUTableCurrentMin Integer32, -- min detected value of current sensor acsPowerMgmtPDUTableCurrentAvg Integer32, -- average value for current sensor acsPowerMgmtPDUTableCurrentReset INTEGER, -- reset max, min and avg values acsPowerMgmtPDUTableVoltageType INTEGER, -- type of PDU voltage acsPowerMgmtPDUTableVoltageValue Integer32, -- actual value of PDU voltage acsPowerMgmtPDUTableVoltageMax Integer32, -- max value of voltage sensor acsPowerMgmtPDUTableVoltageMin Integer32, -- min value of voltage sensor acsPowerMgmtPDUTableVoltageAvg Integer32, -- avg value of voltage sensor acsPowerMgmtPDUTableVoltageReset INTEGER, -- reset max, min and avg values acsPowerMgmtPDUTablePowerType INTEGER, -- type of PDU power consumption acsPowerMgmtPDUTablePowerValue Integer32, -- actual value of PDU power consumption acsPowerMgmtPDUTablePowerMax Integer32, -- max value acsPowerMgmtPDUTablePowerMin Integer32, -- min value acsPowerMgmtPDUTablePowerAvg Integer32, -- average value acsPowerMgmtPDUTablePowerReset INTEGER, -- reset max, min and avg values acsPowerMgmtPDUTablePowerFactorType INTEGER, -- type of PDU power factor acsPowerMgmtPDUTablePowerFactorValue Integer32, -- actual value of PDU power factor acsPowerMgmtPDUTablePowerFactorMax Integer32, -- max value for power factor acsPowerMgmtPDUTablePowerFactorMin Integer32, -- min value for power factor acsPowerMgmtPDUTablePowerFactorAvg Integer32, -- avg value for power factor acsPowerMgmtPDUTablePowerFactorReset INTEGER, -- reset max, min and avg values acsPowerMgmtPDUTableAlarm INTEGER, -- status of PDU alarm acsPowerMgmtPDUTableEnvSensors Integer32 -- number of environmental sensors } acsPowerMgmtPDUTablePortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Number of serial port when the PDU is connected." ::= { acsPowerMgmtPDUTableEntry 1 } acsPowerMgmtPDUTablePduIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "A PDU position in the chain." ::= { acsPowerMgmtPDUTableEntry 2 } acsPowerMgmtPDUTablePduId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PDU identification." ::= { acsPowerMgmtPDUTableEntry 3 } acsPowerMgmtPDUTablePortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of serial port when the PDU is connected." ::= { acsPowerMgmtPDUTableEntry 4 } acsPowerMgmtPDUTableModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Model of the PDU." ::= { acsPowerMgmtPDUTableEntry 5 } acsPowerMgmtPDUTableVendor OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Vendor of the PDU." ::= { acsPowerMgmtPDUTableEntry 6 } acsPowerMgmtPDUTableFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the PDU firmware." ::= { acsPowerMgmtPDUTableEntry 7 } acsPowerMgmtPDUTableNumberOfOutlets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outlets of the PDU." ::= { acsPowerMgmtPDUTableEntry 8 } acsPowerMgmtPDUTableCurrentNOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Number of current sensors in the PDU." ::= { acsPowerMgmtPDUTableEntry 9 } acsPowerMgmtPDUTableCurrent1Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Current of the sensor 1 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)" ::= { acsPowerMgmtPDUTableEntry 10 } acsPowerMgmtPDUTableCurrent1Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum current of the sensor 1 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value." ::= { acsPowerMgmtPDUTableEntry 11 } acsPowerMgmtPDUTableCurrent2Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Current of the sensor 2 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)" ::= { acsPowerMgmtPDUTableEntry 12 } acsPowerMgmtPDUTableCurrent2Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum current of the sensor 2 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value." ::= { acsPowerMgmtPDUTableEntry 13} acsPowerMgmtPDUTableCurrent3Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Current of the sensor 3 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)" ::= { acsPowerMgmtPDUTableEntry 14 } acsPowerMgmtPDUTableCurrent3Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum current of the sensor 3 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value." ::= { acsPowerMgmtPDUTableEntry 15 } acsPowerMgmtPDUTableTemperatureNOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Number of temperature sensors in the PDU." ::= { acsPowerMgmtPDUTableEntry 16 } acsPowerMgmtPDUTableTemperature1Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius)." ::= { acsPowerMgmtPDUTableEntry 17 } acsPowerMgmtPDUTableTemperature1Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature." ::= { acsPowerMgmtPDUTableEntry 18 } acsPowerMgmtPDUTableTemperature2Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius)." ::= { acsPowerMgmtPDUTableEntry 19 } acsPowerMgmtPDUTableTemperature2Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature." ::= { acsPowerMgmtPDUTableEntry 20 } acsPowerMgmtPDUTableTemperature3Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius)." ::= { acsPowerMgmtPDUTableEntry 21 } acsPowerMgmtPDUTableTemperature3Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature." ::= { acsPowerMgmtPDUTableEntry 22 } acsPowerMgmtPDUTableHumidityNOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Number of humidity sensors in the PDU." ::= { acsPowerMgmtPDUTableEntry 23 } acsPowerMgmtPDUTableHumidity1Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Humidity of this PM unit . If the humidity measurement is not installed this value will be 0." ::= { acsPowerMgmtPDUTableEntry 24 } acsPowerMgmtPDUTableHumidity1Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature." ::= { acsPowerMgmtPDUTableEntry 25 } acsPowerMgmtPDUTableHumidity2Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Humidity of this PM unit . If the humidity measurement is not installed this value will be 0." ::= { acsPowerMgmtPDUTableEntry 26 } acsPowerMgmtPDUTableHumidity2Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature." ::= { acsPowerMgmtPDUTableEntry 27 } acsPowerMgmtPDUTableHumidity3Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Humidity of this PM unit . If the humidity measurement is not installed this value will be 0." ::= { acsPowerMgmtPDUTableEntry 28 } acsPowerMgmtPDUTableHumidity3Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature." ::= { acsPowerMgmtPDUTableEntry 29 } acsPowerMgmtPDUTableVoltageNOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Number of voltage sensors in the PDU." ::= { acsPowerMgmtPDUTableEntry 30 } acsPowerMgmtPDUTableVoltage1Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Voltage of this sensor in this PDU unit." ::= { acsPowerMgmtPDUTableEntry 31 } acsPowerMgmtPDUTableVoltage1Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage." ::= { acsPowerMgmtPDUTableEntry 32 } acsPowerMgmtPDUTableVoltage2Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Voltage of this sensor in this PDU unit." ::= { acsPowerMgmtPDUTableEntry 33 } acsPowerMgmtPDUTableVoltage2Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage." ::= { acsPowerMgmtPDUTableEntry 34 } acsPowerMgmtPDUTableVoltage3Value OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Voltage of this sensor in this PDU unit." ::= { acsPowerMgmtPDUTableEntry 35 } acsPowerMgmtPDUTableVoltage3Max OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage." ::= { acsPowerMgmtPDUTableEntry 36 } acsPowerMgmtPDUTableNumberOfPhases OBJECT-TYPE SYNTAX INTEGER { single-phase (0), three-phase (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Number of phases of this PDU unit." ::= { acsPowerMgmtPDUTableEntry 37 } acsPowerMgmtPDUTableNumberOfBanks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of banks of this PDU unit." ::= { acsPowerMgmtPDUTableEntry 38 } acsPowerMgmtPDUTableCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of current sensor in this PDU.( A x 10 )" ::= { acsPowerMgmtPDUTableEntry 39 } acsPowerMgmtPDUTableCurrentMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of current sensor in this PDU.( A x 10 )" ::= { acsPowerMgmtPDUTableEntry 40 } acsPowerMgmtPDUTableCurrentMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of current sensor in this PDU.( A x 10 )" ::= { acsPowerMgmtPDUTableEntry 41 } acsPowerMgmtPDUTableCurrentAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for current sensor in this PDU.( A x 10 )" ::= { acsPowerMgmtPDUTableEntry 42 } acsPowerMgmtPDUTableCurrentReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of current." ::= { acsPowerMgmtPDUTableEntry 43 } acsPowerMgmtPDUTableVoltageType OBJECT-TYPE SYNTAX INTEGER { none-sensor (0), estimated (1), read (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of voltage values." ::= { acsPowerMgmtPDUTableEntry 44 } acsPowerMgmtPDUTableVoltageValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of voltage sensor in this PDU unit.( V )" ::= { acsPowerMgmtPDUTableEntry 45 } acsPowerMgmtPDUTableVoltageMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of voltage sensor in this PDU unit.( V )" ::= { acsPowerMgmtPDUTableEntry 46 } acsPowerMgmtPDUTableVoltageMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of voltage sensor in this PDU unit.( V )" ::= { acsPowerMgmtPDUTableEntry 47 } acsPowerMgmtPDUTableVoltageAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for voltage sensor in this PDU unit.( V )" ::= { acsPowerMgmtPDUTableEntry 48 } acsPowerMgmtPDUTableVoltageReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of voltage." ::= { acsPowerMgmtPDUTableEntry 49 } acsPowerMgmtPDUTablePowerType OBJECT-TYPE SYNTAX INTEGER { none-sensor (0), estimated (1), read (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power consumption values.( W x 10 )" ::= { acsPowerMgmtPDUTableEntry 50 } acsPowerMgmtPDUTablePowerValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of power consumption in this PDU unit.( W x 10 )" ::= { acsPowerMgmtPDUTableEntry 51 } acsPowerMgmtPDUTablePowerMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of power consumption in this PDU unit.( W x 10 )" ::= { acsPowerMgmtPDUTableEntry 52 } acsPowerMgmtPDUTablePowerMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of power consumption in this PDU unit.( W x 10 )" ::= { acsPowerMgmtPDUTableEntry 53 } acsPowerMgmtPDUTablePowerAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for power consumption in this PDU unit.( W x 10 )" ::= { acsPowerMgmtPDUTableEntry 54 } acsPowerMgmtPDUTablePowerReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of power consumption." ::= { acsPowerMgmtPDUTableEntry 55 } acsPowerMgmtPDUTablePowerFactorType OBJECT-TYPE SYNTAX INTEGER { none-sensor (0), estimated (1), read (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power factor values." ::= { acsPowerMgmtPDUTableEntry 56 } acsPowerMgmtPDUTablePowerFactorValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of power factor in this PDU unit.( PF x 100 )" ::= { acsPowerMgmtPDUTableEntry 57 } acsPowerMgmtPDUTablePowerFactorMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of power factor in this PDU unit.( PF x 100 )" ::= { acsPowerMgmtPDUTableEntry 58 } acsPowerMgmtPDUTablePowerFactorMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of power factor in this PDU unit.( PF x 100 )" ::= { acsPowerMgmtPDUTableEntry 59 } acsPowerMgmtPDUTablePowerFactorAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for power factor in this PDU unit.( PF x 100 )" ::= { acsPowerMgmtPDUTableEntry 60 } acsPowerMgmtPDUTablePowerFactorReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of power factor." ::= { acsPowerMgmtPDUTableEntry 61 } acsPowerMgmtPDUTableAlarm OBJECT-TYPE SYNTAX INTEGER { normal (1), blow-fuse (2), hw-ocp (3), high-critical (4), high-warning (5), low-warning (6), low-critical (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Show the PDU alarm status." ::= { acsPowerMgmtPDUTableEntry 62 } acsPowerMgmtPDUTableEnvSensors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of environmental sensor in this PDU." ::= { acsPowerMgmtPDUTableEntry 63 } acsPowerMgmtTotalNumberOfOutlets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outlets managed by the appliance." ::= { acsPowerMgmt 4 } acsPowerMgmtOutletsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsPowerMgmtOutletsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the information about outlets." ::= { acsPowerMgmt 5 } acsPowerMgmtOutletsTableEntry OBJECT-TYPE SYNTAX AcsPowerMgmtOutletsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "each entry has the information about the outlet." INDEX { acsPowerMgmtOutletsTablePortNumber, acsPowerMgmtOutletsTablePduNumber, acsPowerMgmtOutletsTableNumber } ::= { acsPowerMgmtOutletsTable 1 } AcsPowerMgmtOutletsTableEntry ::= SEQUENCE { acsPowerMgmtOutletsTablePortNumber InterfaceIndex, -- serial port # acsPowerMgmtOutletsTablePduNumber InterfaceIndex, acsPowerMgmtOutletsTableNumber InterfaceIndex, -- outlet number in PDU acsPowerMgmtOutletsTableName DisplayString, -- outlet name acsPowerMgmtOutletsTableStatus INTEGER, -- outlet status acsPowerMgmtOutletsTablePowerControl INTEGER, -- manage the outlet acsPowerMgmtOutletsTablePortName DisplayString, -- serial port name acsPowerMgmtOutletsTablePduId DisplayString -- PDU ID } acsPowerMgmtOutletsTablePortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Port number." ::= { acsPowerMgmtOutletsTableEntry 1 } acsPowerMgmtOutletsTablePduNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index." ::= { acsPowerMgmtOutletsTableEntry 2 } acsPowerMgmtOutletsTableNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Number of the outlet in the PDU." ::= { acsPowerMgmtOutletsTableEntry 3 } acsPowerMgmtOutletsTableName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the outlet." ::= { acsPowerMgmtOutletsTableEntry 4 } acsPowerMgmtOutletsTableStatus OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the outlet." ::= { acsPowerMgmtOutletsTableEntry 5 } acsPowerMgmtOutletsTablePowerControl OBJECT-TYPE SYNTAX INTEGER { noAction(1), powerOn(2), powerOff(3), powerCycle(4), powerLock(5), powerUnlock(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU. powerLock(5)= when SET the power lock command is sent to PDU. powerUnlock(6)=when SET the power unlock command is sent to PDU. The powerLock and powerUnlock are valid only for Cyclades-PM PDUs" ::= { acsPowerMgmtOutletsTableEntry 6 } acsPowerMgmtOutletsTablePortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Port Name where the PDU is connected." ::= { acsPowerMgmtOutletsTableEntry 7 } acsPowerMgmtOutletsTablePduId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PDU identification." ::= { acsPowerMgmtOutletsTableEntry 8 } acsPowerMgmtNumberOfOutletGroup OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of configured group of outlets." ::= { acsPowerMgmt 6 } acsPowerMgmtGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsPowerMgmtGroupTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the information about group of outlets." ::= { acsPowerMgmt 7 } acsPowerMgmtGroupTableEntry OBJECT-TYPE SYNTAX AcsPowerMgmtGroupTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "each entry has the information about group of outlets." INDEX { acsPowerMgmtGroupTableIndex } ::= { acsPowerMgmtGroupTable 1 } AcsPowerMgmtGroupTableEntry ::= SEQUENCE { acsPowerMgmtGroupTableIndex InterfaceIndexOrZero, acsPowerMgmtGroupTableName DisplayString, -- group name acsPowerMgmtGroupTableStatus INTEGER, -- group status acsPowerMgmtGroupTablePowerControl INTEGER -- manage the group } acsPowerMgmtGroupTableIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the group." ::= { acsPowerMgmtGroupTableEntry 1 } acsPowerMgmtGroupTableName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the group of outlets." ::= { acsPowerMgmtGroupTableEntry 2 } acsPowerMgmtGroupTableStatus OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the group of outlet." ::= { acsPowerMgmtGroupTableEntry 3 } acsPowerMgmtGroupTablePowerControl OBJECT-TYPE SYNTAX INTEGER { noAction(1), powerOn(2), powerOff(3), powerCycle(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU." ::= { acsPowerMgmtGroupTableEntry 4 } acsPowerMgmtPhasesTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsPowerMgmtPhasesTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains data monitoring of each detected phase." ::= { acsPowerMgmt 8 } acsPowerMgmtPhasesTableEntry OBJECT-TYPE SYNTAX AcsPowerMgmtPhasesTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "each entry has the data monitoring about phases." INDEX { acsPowerMgmtPhasesTablePortNumber, acsPowerMgmtPhasesTablePduIndex, acsPowerMgmtPhasesTablePhaseIndex } ::= { acsPowerMgmtPhasesTable 1 } AcsPowerMgmtPhasesTableEntry ::= SEQUENCE { acsPowerMgmtPhasesTablePortNumber InterfaceIndex, -- number of serial port acsPowerMgmtPhasesTablePduIndex InterfaceIndexOrZero, -- number of PDU acsPowerMgmtPhasesTablePhaseIndex InterfaceIndexOrZero, -- phase index acsPowerMgmtPhasesTablePhaseName DisplayString, -- Phase Name acsPowerMgmtPhasesTablePduId DisplayString, -- PDU identification acsPowerMgmtPhasesTablePortName DisplayString, -- Serial Port Name acsPowerMgmtPhasesTableCurrentValue Integer32, -- actual value of Phase current sensor acsPowerMgmtPhasesTableCurrentMax Integer32, -- max detected value of current sensor acsPowerMgmtPhasesTableCurrentMin Integer32, -- min detected value of current sensor acsPowerMgmtPhasesTableCurrentAvg Integer32, -- average value for current sensor acsPowerMgmtPhasesTableCurrentReset INTEGER, -- reset max, min and avg values acsPowerMgmtPhasesTableVoltageType INTEGER, -- type of phase voltage acsPowerMgmtPhasesTableVoltageValue Integer32, -- actual value of phase voltage acsPowerMgmtPhasesTableVoltageMax Integer32, -- max value of voltage sensor acsPowerMgmtPhasesTableVoltageMin Integer32, -- min value of voltage sensor acsPowerMgmtPhasesTableVoltageAvg Integer32, -- avg value of voltage sensor acsPowerMgmtPhasesTableVoltageReset INTEGER, -- reset max, min and avg values acsPowerMgmtPhasesTablePowerType INTEGER, -- type of phase power consumption acsPowerMgmtPhasesTablePowerValue Integer32, -- actual value of phase power consumption acsPowerMgmtPhasesTablePowerMax Integer32, -- max value acsPowerMgmtPhasesTablePowerMin Integer32, -- min value acsPowerMgmtPhasesTablePowerAvg Integer32, -- average value acsPowerMgmtPhasesTablePowerReset INTEGER, -- reset max, min and avg values acsPowerMgmtPhasesTablePowerFactorType INTEGER, -- type of phase power factor acsPowerMgmtPhasesTablePowerFactorValue Integer32, -- actual value of phase power factor acsPowerMgmtPhasesTablePowerFactorMax Integer32, -- max value for power factor acsPowerMgmtPhasesTablePowerFactorMin Integer32, -- min value for power factor acsPowerMgmtPhasesTablePowerFactorAvg Integer32, -- avg value for power factor acsPowerMgmtPhasesTablePowerFactorReset INTEGER, -- reset max, min and avg values acsPowerMgmtPhasesTableAlarm INTEGER -- phase alarm status } acsPowerMgmtPhasesTablePortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Number of serial port when the PDU is connected." ::= { acsPowerMgmtPhasesTableEntry 1 } acsPowerMgmtPhasesTablePduIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "A PDU position in the chain." ::= { acsPowerMgmtPhasesTableEntry 2 } acsPowerMgmtPhasesTablePhaseIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "phase index in the PDU." ::= { acsPowerMgmtPhasesTableEntry 3 } acsPowerMgmtPhasesTablePhaseName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "phase name in the PDU." ::= { acsPowerMgmtPhasesTableEntry 4 } acsPowerMgmtPhasesTablePduId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PDU identification." ::= { acsPowerMgmtPhasesTableEntry 5 } acsPowerMgmtPhasesTablePortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of serial port when the PDU is connected." ::= { acsPowerMgmtPhasesTableEntry 6 } acsPowerMgmtPhasesTableCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of current sensor in this phase.( A x 10 )" ::= { acsPowerMgmtPhasesTableEntry 7 } acsPowerMgmtPhasesTableCurrentMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of current sensor in this phase.( A x 10 )" ::= { acsPowerMgmtPhasesTableEntry 8 } acsPowerMgmtPhasesTableCurrentMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of current sensor in this phase.( A x 10 )" ::= { acsPowerMgmtPhasesTableEntry 9 } acsPowerMgmtPhasesTableCurrentAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for current sensor in this phase.( A x 10 )" ::= { acsPowerMgmtPhasesTableEntry 10 } acsPowerMgmtPhasesTableCurrentReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of current." ::= { acsPowerMgmtPhasesTableEntry 11 } acsPowerMgmtPhasesTableVoltageType OBJECT-TYPE SYNTAX INTEGER { none-sensor (0), estimated (1), read (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of voltage values." ::= { acsPowerMgmtPhasesTableEntry 12 } acsPowerMgmtPhasesTableVoltageValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of voltage sensor in this phase.( V )" ::= { acsPowerMgmtPhasesTableEntry 13 } acsPowerMgmtPhasesTableVoltageMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of voltage sensor in this phase.( V )" ::= { acsPowerMgmtPhasesTableEntry 14 } acsPowerMgmtPhasesTableVoltageMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of voltage sensor in this phase.( V )" ::= { acsPowerMgmtPhasesTableEntry 15 } acsPowerMgmtPhasesTableVoltageAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for voltage sensor in this phase.( V )" ::= { acsPowerMgmtPhasesTableEntry 16 } acsPowerMgmtPhasesTableVoltageReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of voltage." ::= { acsPowerMgmtPhasesTableEntry 17 } acsPowerMgmtPhasesTablePowerType OBJECT-TYPE SYNTAX INTEGER { none-sensor (0), estimated (1), read (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power consumption values." ::= { acsPowerMgmtPhasesTableEntry 18 } acsPowerMgmtPhasesTablePowerValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of power consumption in this phase.( W x 10 )" ::= { acsPowerMgmtPhasesTableEntry 19 } acsPowerMgmtPhasesTablePowerMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of power consumption in this phase.( W x 10 )" ::= { acsPowerMgmtPhasesTableEntry 20 } acsPowerMgmtPhasesTablePowerMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of power consumption in this phase.( W x 10 )" ::= { acsPowerMgmtPhasesTableEntry 21 } acsPowerMgmtPhasesTablePowerAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for power consumption in this phase.( W x 10 )" ::= { acsPowerMgmtPhasesTableEntry 22 } acsPowerMgmtPhasesTablePowerReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of power consumption." ::= { acsPowerMgmtPhasesTableEntry 23 } acsPowerMgmtPhasesTablePowerFactorType OBJECT-TYPE SYNTAX INTEGER { none-sensor (0), estimated (1), read (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power factor values." ::= { acsPowerMgmtPhasesTableEntry 24 } acsPowerMgmtPhasesTablePowerFactorValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of power factor in this phase.( PF x 100 )" ::= { acsPowerMgmtPhasesTableEntry 25 } acsPowerMgmtPhasesTablePowerFactorMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of power factor in this phase.( PF x 100 )" ::= { acsPowerMgmtPhasesTableEntry 26 } acsPowerMgmtPhasesTablePowerFactorMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of power factor in this phase.( PF x 100 )" ::= { acsPowerMgmtPhasesTableEntry 27 } acsPowerMgmtPhasesTablePowerFactorAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for power factor in this phase.( PF x 100 )" ::= { acsPowerMgmtPhasesTableEntry 28 } acsPowerMgmtPhasesTablePowerFactorReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of power factor." ::= { acsPowerMgmtPhasesTableEntry 29 } acsPowerMgmtPhasesTableAlarm OBJECT-TYPE SYNTAX INTEGER { normal (1), blow-fuse (2), hw-ocp (3), high-critical (4), high-warning (5), low-warning (6), low-critical (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Show the phase alarm status." ::= { acsPowerMgmtPhasesTableEntry 30 } acsPowerMgmtBanksTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsPowerMgmtBanksTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains data monitoring of each detected bank." ::= { acsPowerMgmt 9 } acsPowerMgmtBanksTableEntry OBJECT-TYPE SYNTAX AcsPowerMgmtBanksTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "each entry has the data monitoring about bank." INDEX { acsPowerMgmtBanksTablePortNumber, acsPowerMgmtBanksTablePduIndex, acsPowerMgmtBanksTableBankIndex } ::= { acsPowerMgmtBanksTable 1 } AcsPowerMgmtBanksTableEntry ::= SEQUENCE { acsPowerMgmtBanksTablePortNumber InterfaceIndex, -- number of serial port acsPowerMgmtBanksTablePduIndex InterfaceIndexOrZero, -- number of PDU acsPowerMgmtBanksTableBankIndex InterfaceIndexOrZero, -- bank index acsPowerMgmtBanksTableBankName DisplayString, -- Bank Name acsPowerMgmtBanksTablePduId DisplayString, -- PDU identification acsPowerMgmtBanksTablePortName DisplayString, -- Serial Port Name acsPowerMgmtBanksTableCurrentValue Integer32, -- actual value of bank current sensor acsPowerMgmtBanksTableCurrentMax Integer32, -- max detected value of current sensor acsPowerMgmtBanksTableCurrentMin Integer32, -- min detected value of current sensor acsPowerMgmtBanksTableCurrentAvg Integer32, -- average value for current sensor acsPowerMgmtBanksTableCurrentReset INTEGER, -- reset max, min and avg values acsPowerMgmtBanksTableVoltageType INTEGER, -- type of bank voltage acsPowerMgmtBanksTableVoltageValue Integer32, -- actual value of bank voltage acsPowerMgmtBanksTableVoltageMax Integer32, -- max value of voltage sensor acsPowerMgmtBanksTableVoltageMin Integer32, -- min value of voltage sensor acsPowerMgmtBanksTableVoltageAvg Integer32, -- avg value of voltage sensor acsPowerMgmtBanksTableVoltageReset INTEGER, -- reset max, min and avg values acsPowerMgmtBanksTablePowerType INTEGER, -- type of bank power consumption acsPowerMgmtBanksTablePowerValue Integer32, -- actual value of bank power consumption acsPowerMgmtBanksTablePowerMax Integer32, -- max value acsPowerMgmtBanksTablePowerMin Integer32, -- min value acsPowerMgmtBanksTablePowerAvg Integer32, -- average value acsPowerMgmtBanksTablePowerReset INTEGER, -- reset max, min and avg values acsPowerMgmtBanksTablePowerFactorType INTEGER, -- type of bank power factor acsPowerMgmtBanksTablePowerFactorValue Integer32, -- actual value of bank power factor acsPowerMgmtBanksTablePowerFactorMax Integer32, -- max value for power factor acsPowerMgmtBanksTablePowerFactorMin Integer32, -- min value for power factor acsPowerMgmtBanksTablePowerFactorAvg Integer32, -- avg value for power factor acsPowerMgmtBanksTablePowerFactorReset INTEGER, -- reset max, min and avg values acsPowerMgmtBanksTableAlarm INTEGER -- status of bank alarm } acsPowerMgmtBanksTablePortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Number of serial port when the PDU is connected." ::= { acsPowerMgmtBanksTableEntry 1 } acsPowerMgmtBanksTablePduIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "A PDU position in the chain." ::= { acsPowerMgmtBanksTableEntry 2 } acsPowerMgmtBanksTableBankIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Bank index in the PDU." ::= { acsPowerMgmtBanksTableEntry 3 } acsPowerMgmtBanksTableBankName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Bank name in the PDU." ::= { acsPowerMgmtBanksTableEntry 4 } acsPowerMgmtBanksTablePduId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PDU identification." ::= { acsPowerMgmtBanksTableEntry 5 } acsPowerMgmtBanksTablePortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of serial port when the PDU is connected." ::= { acsPowerMgmtBanksTableEntry 6 } acsPowerMgmtBanksTableCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of current sensor in this bank.( A x 10 )" ::= { acsPowerMgmtBanksTableEntry 7 } acsPowerMgmtBanksTableCurrentMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of current sensor in this bank.( A x 10 )" ::= { acsPowerMgmtBanksTableEntry 8 } acsPowerMgmtBanksTableCurrentMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of current sensor in this bank.( A x 10 )" ::= { acsPowerMgmtBanksTableEntry 9 } acsPowerMgmtBanksTableCurrentAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for current sensor in this bank.( A x 10 )" ::= { acsPowerMgmtBanksTableEntry 10 } acsPowerMgmtBanksTableCurrentReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of current." ::= { acsPowerMgmtBanksTableEntry 11 } acsPowerMgmtBanksTableVoltageType OBJECT-TYPE SYNTAX INTEGER { none-sensor (0), estimated (1), read (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of voltage values." ::= { acsPowerMgmtBanksTableEntry 12 } acsPowerMgmtBanksTableVoltageValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of voltage sensor in this bank.( V )" ::= { acsPowerMgmtBanksTableEntry 13 } acsPowerMgmtBanksTableVoltageMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of voltage sensor in this bank.( V )" ::= { acsPowerMgmtBanksTableEntry 14 } acsPowerMgmtBanksTableVoltageMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of voltage sensor in this bank.( V )" ::= { acsPowerMgmtBanksTableEntry 15 } acsPowerMgmtBanksTableVoltageAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for voltage sensor in this bank.( V )" ::= { acsPowerMgmtBanksTableEntry 16 } acsPowerMgmtBanksTableVoltageReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of voltage." ::= { acsPowerMgmtBanksTableEntry 17 } acsPowerMgmtBanksTablePowerType OBJECT-TYPE SYNTAX INTEGER { none-sensor (0), estimated (1), read (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power consumption values." ::= { acsPowerMgmtBanksTableEntry 18 } acsPowerMgmtBanksTablePowerValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of power consumption in this bank.( W x 10 )" ::= { acsPowerMgmtBanksTableEntry 19 } acsPowerMgmtBanksTablePowerMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of power consumption in this bank.( W x 10 )" ::= { acsPowerMgmtBanksTableEntry 20 } acsPowerMgmtBanksTablePowerMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of power consumption in this bank.( W x 10 )" ::= { acsPowerMgmtBanksTableEntry 21 } acsPowerMgmtBanksTablePowerAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for power consumption in this bank.( W x 10 )" ::= { acsPowerMgmtBanksTableEntry 22 } acsPowerMgmtBanksTablePowerReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of power consumption." ::= { acsPowerMgmtBanksTableEntry 23 } acsPowerMgmtBanksTablePowerFactorType OBJECT-TYPE SYNTAX INTEGER { none-sensor (0), estimated (1), read (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power factor values." ::= { acsPowerMgmtBanksTableEntry 24 } acsPowerMgmtBanksTablePowerFactorValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of power factor in this bank.( PF x 100 )" ::= { acsPowerMgmtBanksTableEntry 25 } acsPowerMgmtBanksTablePowerFactorMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of power factor in this bank.( PF x 100 )" ::= { acsPowerMgmtBanksTableEntry 26 } acsPowerMgmtBanksTablePowerFactorMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of power factor in this bank.( PF x 100 )" ::= { acsPowerMgmtBanksTableEntry 27 } acsPowerMgmtBanksTablePowerFactorAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for power factor in this bank.( PF x 100 )" ::= { acsPowerMgmtBanksTableEntry 28 } acsPowerMgmtBanksTablePowerFactorReset OBJECT-TYPE SYNTAX INTEGER { no-action (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avg values of power factor." ::= { acsPowerMgmtBanksTableEntry 29 } acsPowerMgmtBanksTableAlarm OBJECT-TYPE SYNTAX INTEGER { normal (1), blow-fuse (2), hw-ocp (3), high-critical (4), high-warning (5), low-warning (6), low-critical (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Show the bank alarm status." ::= { acsPowerMgmtBanksTableEntry 30 } acsPowerMgmtEnvMonTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsPowerMgmtEnvMonTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains data monitoring of each detected environmental sensor." ::= { acsPowerMgmt 10 } acsPowerMgmtEnvMonTableEntry OBJECT-TYPE SYNTAX AcsPowerMgmtEnvMonTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "each entry has the data monitoring about environmental sensors." INDEX { acsPowerMgmtEnvMonTablePortNumber, acsPowerMgmtEnvMonTablePduIndex, acsPowerMgmtEnvMonTableIndex } ::= { acsPowerMgmtEnvMonTable 1 } AcsPowerMgmtEnvMonTableEntry ::= SEQUENCE { acsPowerMgmtEnvMonTablePortNumber InterfaceIndex, -- number of serial port acsPowerMgmtEnvMonTablePduIndex InterfaceIndexOrZero, -- number of PDU acsPowerMgmtEnvMonTableIndex InterfaceIndexOrZero, -- index acsPowerMgmtEnvMonTableName DisplayString, -- sensor name acsPowerMgmtEnvMonTablePduId DisplayString, -- PDU identification acsPowerMgmtEnvMonTablePortName DisplayString, -- Serial Port Name acsPowerMgmtEnvMonTableType INTEGER, -- environmental sensor type acsPowerMgmtEnvMonTableStatus INTEGER, -- state of digital sensor acsPowerMgmtEnvMonTableValue Integer32, -- value acsPowerMgmtEnvMonTableMaxValue Integer32 -- max value } acsPowerMgmtEnvMonTablePortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Number of serial port when the PDU is connected." ::= { acsPowerMgmtEnvMonTableEntry 1 } acsPowerMgmtEnvMonTablePduIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "A PDU position in the chain." ::= { acsPowerMgmtEnvMonTableEntry 2 } acsPowerMgmtEnvMonTableIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "envmon sensor index." ::= { acsPowerMgmtEnvMonTableEntry 3 } acsPowerMgmtEnvMonTableName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "envmon sensor name." ::= { acsPowerMgmtEnvMonTableEntry 4 } acsPowerMgmtEnvMonTablePduId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PDU identification." ::= { acsPowerMgmtEnvMonTableEntry 5 } acsPowerMgmtEnvMonTablePortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of serial port when the PDU is connected." ::= { acsPowerMgmtEnvMonTableEntry 6 } acsPowerMgmtEnvMonTableType OBJECT-TYPE SYNTAX INTEGER { temp-internal (1), temperature (2), humidity (3), air-flow (4), smoke (5), dry-concact (6), water-level (7), motion (8), unplugged (9), unknown (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of environmental monitor." ::= { acsPowerMgmtEnvMonTableEntry 7 } acsPowerMgmtEnvMonTableStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), triggered(2), not-applicable(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of digital sensors: Dry-Contact, Water level, Smoke sensor, Motion sensor." ::= { acsPowerMgmtEnvMonTableEntry 8 } acsPowerMgmtEnvMonTableValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu." ::= { acsPowerMgmtEnvMonTableEntry 9 } acsPowerMgmtEnvMonTableMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu." ::= { acsPowerMgmtEnvMonTableEntry 10 } acsPowerMgmtOutElecMonTable OBJECT-TYPE SYNTAX SEQUENCE OF AcsPowerMgmtOutElecMonTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the information about data monitoring of outlets." ::= { acsPowerMgmt 11 } acsPowerMgmtOutElecMonTableEntry OBJECT-TYPE SYNTAX AcsPowerMgmtOutElecMonTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "each entry has the information about the outlet." INDEX { acsPowerMgmtOutElecMonTablePortNumber, acsPowerMgmtOutElecMonTablePduNumber, acsPowerMgmtOutElecMonTableNumber } ::= { acsPowerMgmtOutElecMonTable 1 } AcsPowerMgmtOutElecMonTableEntry ::= SEQUENCE { acsPowerMgmtOutElecMonTablePortNumber InterfaceIndex, -- serial port # acsPowerMgmtOutElecMonTablePduNumber InterfaceIndex, acsPowerMgmtOutElecMonTableNumber InterfaceIndex, -- outlet number in PDU acsPowerMgmtOutElecMonTableCurrentValue Integer32, -- actual value for current acsPowerMgmtOutElecMonTableCurrentMax Integer32, -- max detected value for current acsPowerMgmtOutElecMonTableCurrentMin Integer32, -- min detected value for current acsPowerMgmtOutElecMonTableCurrentAvg Integer32, -- average value for current acsPowerMgmtOutElecMonTableCurrentReset INTEGER, -- reset max, min and avg values of current acsPowerMgmtOutElecMonTablePowerValue Integer32, -- actual value for power acsPowerMgmtOutElecMonTablePowerMax Integer32, -- max detected value for power acsPowerMgmtOutElecMonTablePowerMin Integer32, -- min detected value for power acsPowerMgmtOutElecMonTablePowerAvg Integer32, -- average value for power acsPowerMgmtOutElecMonTablePowerReset INTEGER, -- reset max, min and avg values of power acsPowerMgmtOutElecMonTableVoltageValue Integer32, -- actual value for voltage acsPowerMgmtOutElecMonTableVoltageMax Integer32, -- max detected value for voltage acsPowerMgmtOutElecMonTableVoltageMin Integer32, -- min detected value for voltage acsPowerMgmtOutElecMonTableVoltageAvg Integer32, -- average value for voltage acsPowerMgmtOutElecMonTableVoltageReset INTEGER, -- reset max, min and avg values of voltage acsPowerMgmtOutElecMonTablePowerFactorValue Integer32, -- actual value for power factor acsPowerMgmtOutElecMonTablePowerFactorMax Integer32, -- max detected value for power factor acsPowerMgmtOutElecMonTablePowerFactorMin Integer32, -- min detected value for power factor acsPowerMgmtOutElecMonTablePowerFactorAvg Integer32, -- avg value for power factor acsPowerMgmtOutElecMonTablePowerFactorReset INTEGER, -- reset max, min and avg values of power factor acsPowerMgmtOutElecMonTableAlarm INTEGER -- outlet alarm status } acsPowerMgmtOutElecMonTablePortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Port number." ::= { acsPowerMgmtOutElecMonTableEntry 1 } acsPowerMgmtOutElecMonTablePduNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index." ::= { acsPowerMgmtOutElecMonTableEntry 2 } acsPowerMgmtOutElecMonTableNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Number of the outlet in the PDU." ::= { acsPowerMgmtOutElecMonTableEntry 3 } acsPowerMgmtOutElecMonTableCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of outlet current sensor.( A x 10 )" ::= { acsPowerMgmtOutElecMonTableEntry 4 } acsPowerMgmtOutElecMonTableCurrentMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of outlet current sensor.( A x 10 )" ::= { acsPowerMgmtOutElecMonTableEntry 5 } acsPowerMgmtOutElecMonTableCurrentMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of outlet current sensor.( A x 10 )" ::= { acsPowerMgmtOutElecMonTableEntry 6 } acsPowerMgmtOutElecMonTableCurrentAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for outlet current sensor.( A x 10 )" ::= { acsPowerMgmtOutElecMonTableEntry 7 } acsPowerMgmtOutElecMonTableCurrentReset OBJECT-TYPE SYNTAX INTEGER { noAction(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avertage values of outlet current." ::= { acsPowerMgmtOutElecMonTableEntry 8 } acsPowerMgmtOutElecMonTablePowerValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of outlet power comsumption sensor.( W x 10 )" ::= { acsPowerMgmtOutElecMonTableEntry 9 } acsPowerMgmtOutElecMonTablePowerMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of outlet power comsumption sensor.( W x 10 )" ::= { acsPowerMgmtOutElecMonTableEntry 10 } acsPowerMgmtOutElecMonTablePowerMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of outlet power comsumption sensor.( W x 10 )" ::= { acsPowerMgmtOutElecMonTableEntry 11 } acsPowerMgmtOutElecMonTablePowerAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for outlet power comsumption sensor.( W x 10 )" ::= { acsPowerMgmtOutElecMonTableEntry 12 } acsPowerMgmtOutElecMonTablePowerReset OBJECT-TYPE SYNTAX INTEGER { noAction(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avertage values of outlet power comsumption." ::= { acsPowerMgmtOutElecMonTableEntry 13 } acsPowerMgmtOutElecMonTableVoltageValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of outlet voltage sensor.( V )" ::= { acsPowerMgmtOutElecMonTableEntry 14 } acsPowerMgmtOutElecMonTableVoltageMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of outlet voltage sensor.( V )" ::= { acsPowerMgmtOutElecMonTableEntry 15 } acsPowerMgmtOutElecMonTableVoltageMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of outlet voltage sensor.( V )" ::= { acsPowerMgmtOutElecMonTableEntry 16 } acsPowerMgmtOutElecMonTableVoltageAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for outlet voltage sensor.( V )" ::= { acsPowerMgmtOutElecMonTableEntry 17 } acsPowerMgmtOutElecMonTableVoltageReset OBJECT-TYPE SYNTAX INTEGER { noAction(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avertage values of outlet voltage." ::= { acsPowerMgmtOutElecMonTableEntry 18 } acsPowerMgmtOutElecMonTablePowerFactorValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual value of outlet power-factor sensor.( PF x 100 )" ::= { acsPowerMgmtOutElecMonTableEntry 19 } acsPowerMgmtOutElecMonTablePowerFactorMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max detected value of outlet power-factor sensor.( PF x 100 )" ::= { acsPowerMgmtOutElecMonTableEntry 20 } acsPowerMgmtOutElecMonTablePowerFactorMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Min detected value of outlet power-factor sensor.( PF x 100 )" ::= { acsPowerMgmtOutElecMonTableEntry 21 } acsPowerMgmtOutElecMonTablePowerFactorAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average value for outlet power-factor sensor.( PF x 100 )" ::= { acsPowerMgmtOutElecMonTableEntry 22 } acsPowerMgmtOutElecMonTablePowerFactorReset OBJECT-TYPE SYNTAX INTEGER { noAction(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset max, min and avertage values of outlet power-factor." ::= { acsPowerMgmtOutElecMonTableEntry 23 } acsPowerMgmtOutElecMonTableAlarm OBJECT-TYPE SYNTAX INTEGER { normal (1), blow-fuse (2), hw-ocp (3), high-critical (4), high-warning (5), low-warning (6), low-critical (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Show the outlet alarm status." ::= { acsPowerMgmtOutElecMonTableEntry 24 } END