-- ============================================================================ -- AT-PTP.MIB, Allied Telesis enterprise MIB: -- PTP MIB for the AlliedWare Plus(tm) operating system -- -- Based on ietf-tictoc-ptp-mib draft #11 -- -- ============================================================================ AT-PTP-MIB DEFINITIONS ::= BEGIN IMPORTS modules FROM AT-SMI-MIB InterfaceIndexOrZero FROM IF-MIB OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY, Gauge32, Unsigned32, Counter32, Counter64, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, DisplayString, AutonomousType FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF; atPtpMIB MODULE-IDENTITY LAST-UPDATED "201701230000Z" ORGANIZATION "Allied Telesis, Inc." CONTACT-INFO "http://www.alliedtelesis.com" DESCRIPTION "This MIB file contains definitions of managed objects for the IEEE 1588v2 Precision Time Protocol (PTP) module." REVISION "201701230000Z" DESCRIPTION "Initial revision." ::= { modules 504 } -- -- Textual conventions -- PtpClockDomainType ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The Domain is identified by an integer, the domainNumber, in the range of 0 to 255. An integer value that is used to assign each PTP device to a particular domain. The following values define the valid domains. Value Definition --------- ------------------- 0 Default domain 1 Alternate domain 1 2 Alternate domain 2 3 Alternate domain 3 4 - 127 User-defined domains 128 - 255 Reserved" REFERENCE "Section 7.1 Domains, Table 2 of [IEEE 1588-2008]" SYNTAX Unsigned32 (0..255) PtpClockIdentity ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "The clock Identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual assigned numbers as indicated in Section 7.5.2.2.2 of [IEEE 1588-2008]. It can also be non-EUI-64 address as defined in section 7.5.2.2.3 of [IEEE 1588-2008]. The EUI-64 address is divided into the following fields: OUI bytes (0-2) Extension identifier bytes (3-7) The clock identifier can be constructed from existing EUI-48 assignments and here is an abbreviated example extracted from section 7.5.2.2.2 [IEEE 1588-2008]. Company EUI-48 = 0xACDE4823456716 EUI-64 = ACDE48FFFE23456716 It is important to note the IEEE Registration Authority has deprecated the use of MAC-48 in any new design." REFERENCE "Section 7.5.2.2.1 of [IEEE 1588-2008]" SYNTAX OCTET STRING (SIZE (8)) PtpClockInstanceType ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The instance of the Clock of a given clock type in a given domain." SYNTAX Unsigned32 (0..255) PtpClockIntervalBase2 ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The interval included in message types Announce, Sync, Delay_Req, and Pdelay_Req as indicated in section 7.7.2.1 of [IEEE 1588-2008]. The mean time interval between successive messages shall be represented as the logarithm to the base 2 of this time interval measured in seconds on the local clock of the device sending the message. The values of these logarithmic attributes shall be selected from integers in the range -128 to 127 subject to further limits established in an applicable PTP profile." REFERENCE "Section 7.7.2.1 General interval specification of [IEEE 1588-2008]" SYNTAX Integer32 (-128..127) PtpClockMechanismType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The clock type based on whether end-to-end or peer-to-peer mechanisms are used. The mechanism used to calculate the Mean Path Delay as indicated in Table 9 of [IEEE 1588-2008]. Delay mechanism Value(hex) Specification --------------- ---------- ------------- E2E 01 The port is configured to use the delay request-response mechanism. P2P 02 The port is configured to use the peer delay mechanism. DISABLED FE The port does not implement the delay mechanism." REFERENCE "Sections 8.2.5.4.4 portDS.delayMechanism, 6.6.4 Measuring link propagation delay in clocks supporting peer-to-peer path correction, 7.4.2 communication Path asymmetry of [IEEE 1588-2008]." SYNTAX INTEGER { e2e(1), p2p(2), disabled(254) } PtpClockPortNumber ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "An index identifying a specific Precision Time Protocol (PTP) port on a PTP node." REFERENCE "Sections 7.5.2.3 portNumber and 5.3.5 PortIdentity of [IEEE 1588-2008]" SYNTAX Unsigned32 (0..65535) PtpClockPortState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This is the value of the current state of the protocol engine associated with this port. Port state Value Description ----------------------------------------------------------- initializing 1 In this state a port initializes its data sets, hardware, and communication facilities. faulty 2 The fault state of the protocol. disabled 3 The port shall not place any messages on its communication path. listening 4 The port is waiting for the announceReceiptTimeout to expire or to receive an Announce message from a master. preMaster 5 The port shall behave in all respects as though it were in the MASTER state except that it shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, signaling, or management messages. master 6 The port is behaving as a master port. passive 7 The port shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages, or management messages that are a required response to another management message uncalibrated 8 The local port is preparing to synchronize to the master port. slave 9 The port is synchronizing to the selected master port." REFERENCE "Section 8.2.5.3.1 portState and 9.2.5 State machines of [IEEE 1588-2008]" SYNTAX INTEGER { initializing(1), faulty(2), disabled(3), listening(4), preMaster(5), master(6), passive(7), uncalibrated(8), slave(9) } PtpClockPortTransportTypeAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "The Clock port transport protocol address used for this communication between the clock nodes. This is a string corresponding to the address type as specified by the transport type used. The transport types can be defined elsewhere, in addition to the ones defined in this document. This can be an address of type IP version 4, IP version 6, Ethernet, DeviceNET, ControlNET or IEC61158. The OCTET STRING representation of the OID of ptpWellKnownTransportTypes will be used in the values contained in the OCTET STRING." REFERENCE "Annex D (IPv4), Annex E (IPv6), Annex F (Ethernet), Annex G (DeviceNET), Annex H (ControlNET) and Annex I (IEC61158) of [IEEE 1588-2008]" SYNTAX OCTET STRING (SIZE (1..255)) PtpClockProfileType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Clock Profile used. A profile is the set of allowed Precision Time Protocol (PTP) features applicable to a device." REFERENCE "Section 3.1.30 profile and 19.3 PTP profiles of [IEEE 1588-2008]" SYNTAX INTEGER { default(1), telecom(2), vendorspecific(3) } PtpClockQualityAccuracyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ClockQuality as specified in sections 5.3.7, 7.6.2.5 and Table 6 of [IEEE 1588-2008]. The following values are not represented in the enumerated values. 0x01-0x1F Reserved 0x32-0x7F Reserved It is important to note that section 7.1.1 of [RFC 2578] allows for gaps and enumerate values starting at zero when indicated by the protocol." REFERENCE "Section 5.3.7 ClockQuality, 7.6.2.5 clockAccuracy and Table 6 clockAccuracy enumeration of [IEEE 1588-2008]" SYNTAX INTEGER { -- reserved00(0:31), 0x00 to 0x1F nanoSecond25(32), -- 0x20 nanoSecond100(33), -- 0x21 nanoSecond250(34), -- 0x22 microSec1(35), -- 0x23 microSec2dot5(36), -- 0x24 microSec10(37), -- 0x25 microSec25(38), -- 0x26 microSec100(39), -- 0x27 microSec250(40), -- 0x28 milliSec1(41), -- 0x29 milliSec2dot5(42), -- 0x2A milliSec10(43), -- 0x2B milliSec25(44), -- 0x2C milliSec100(45), -- 0x2D milliSec250(46), -- 0x2E second1(47), -- 0x2F second10(48), -- 0x30 secondGreater10(49), -- 0x31 unknown(254) -- 0xFE -- reserved255(255), 0xFF } PtpClockQualityClassType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ClockQuality as specified in section 5.3.7 ClockQuality, 7.6.2.4 clockClass and Table 5 clockClass specifications of [IEEE 1588-2008]. Value Description -------- ------------------------------------------------ 0 Reserved to enable compatibility with future versions. 1-5 Reserved 6 Shall designate a clock that is synchronized to a primary reference time source. The timescale distributed shall be PTP. A clockClass 6 clock shall not be a slave to another clock in the domain. 7 Shall designate a clock that has previously been designated as clockClass 6 but that has lost the ability to synchronize to a primary reference time source and is in holdover mode and within holdover specifications. The timescale distributed shall be PTP. A clockClass 7 clock shall not be a slave to another clock in the domain. 8 Reserved. 9-10 Reserved to enable compatibility with future versions. 11-12 Reserved. 13 Shall designate a clock that is synchronized to an application-specific source of time. The timescale distributed shall be ARB. A clockClass 13 clock shall not be a slave to another clock in the domain. 14 Shall designate a clock that has previously been designated as clockClass 13 but that has lost the ability to synchronize to an application-specific source of time and is in holdover mode and within holdover specifications. The timescale distributed shall be ARB. A clockClass 14 clock shall not be a slave to another clock in the domain. 15-51 Reserved. 52 Degradation alternative A for a clock of clockClass 7 that is not within holdover specification. A clock of clockClass 52 shall not be a slave to another clock in the domain. 53-57 Reserved. 58 Degradation alternative A for a clock of clockClass 14 that is not within holdover specification. A clock of clockClass 58 shall not be a slave to another clock in the domain. 59-67 Reserved. 68-122 For use by alternate PTP profiles. 123-127 Reserved. 128-132 Reserved. 133-170 For use by alternate PTP profiles. 171-186 Reserved. 187 Degradation alternative B for a clock of clockClass 7 that is not within holdover specification. A clock of clockClass 187 may be a slave to another clock in the domain. 188-192 Reserved. 193 Degradation alternative B for a clock of clockClass 14 that is not within holdover specification. A clock of clockClass 193 may be a slave to another clock in the domain. 194-215 Reserved. 216-232 For use by alternate PTP profiles. 233-247 Reserved. 248 Default. This clockClass shall be used if none of the other clockClass definitions apply. 249-250 Reserved. 251 Reserved for version 1 compatibility; see Clause 18. 252-254 Reserved. 255 Shall be the clockClass of a slave-only clock; see 9.2.2." REFERENCE "Section 5.3.7, 7.6.2.4 and Table 5 of [IEEE 1588-2008]." SYNTAX INTEGER { -- reserved(0), 0x00 -- reserved(1:5), 0x01 to 0x05 clockclass6(6), -- 0x06 clockclass7(7), -- 0x07 -- reserved(8), 0x08 -- reserved(9:10), 0x09 to 0x0A -- reserved(11:12), 0x0B, 0x0C clockclass13(13), -- 0x0D clockclass14(14), -- 0x0E -- reserved(15:51), 0x0F to 0x33 clockclass52(52), -- 0x34 -- reserved(53:57), 0x35 to 0x39 clockclass58(58) -- 0x3A -- reserved(59:67), 0x3B to 0x43 -- otherprofiles(68:122), 0x44 to 0x7A -- reserved(123:127), 0x7B to 0x7F -- reserved(128:132), 0x80 to 0x84 } PtpClockRoleType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Clock Role. The protocol generates a Master Slave relationship among the clocks in the system. Clock Role Value Description -------------------------------------------------------------- Master clock 1 A clock that is the source of time to which all other clocks on that path synchronize. Slave clock 2 A clock which synchronizes to another clock (master)." SYNTAX INTEGER { master(1), slave(2) } PtpClockStateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The clock state returned by a PTP engine. Clock State Value Description -------------------------------------------------------------- Freerun state 1 Applies to a slave device that is not locked to a master. This is the initial state a slave starts out with when it is not getting any PTP packets from the master or because of some other input error (erroneous packets, etc). Holdover state 2 In this state the slave device is locked to a master but communication with the master has been lost or the timestamps in the PTP packets are incorrect. Since the slave was locked to the master, it can run in this state, with similar accuracy for some time. If communication with the master is not restored for an extended period (dependent on the clock implementation), the device should move to the Freerun state. Acquiring state 3 The slave device is receiving packets from a master and is trying to acquire a lock. Freq_locked state 4 Slave device is locked to the Master with respect to frequency, but not phase aligned Phase_aligned state 5 Locked to the master with respect to frequency and phase." SYNTAX INTEGER { freerun(1), holdover(2), acquiring(3), frequencyLocked(4), phaseAligned(5) } PtpClockTimeInterval ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "This textual convention corresponds to the TimeInterval structure indicated in section 5.3.2 of [IEEE 1588-2008]. It will be presented in the form of a character array. Network byte order is assumed. The TimeInterval type represents time intervals. struct TimeInterval { Integer64 scaledNanoseconds; }; The scaledNanoseconds member is the time interval expressed in units of nanoseconds and multiplied by 2**16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the largest positive and negative values of the data type, respectively. For example, 2.5 ns is expressed as string '0000 0000 0002 8000' in Base16." REFERENCE "Section 5.3.2 TimeInterval and section 7.7.2.1 Timer interval specification of [IEEE 1588-2008]" SYNTAX OCTET STRING (SIZE (1..255)) PtpClockTimeSourceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ClockQuality as specified in Sections 5.3.7, 7.6.2.6 and Table 7 of [IEEE 1588-2008]. The following values are not represented in the enumerated values. 0xF0-0xFE For use by alternate PTP profiles 0xFF Reserved It is important to note that section 7.1.1 RFC 2578 allows for gaps and enumerate values to start with zero when indicated by the protocol." REFERENCE "Section 5.3.7, 7.6.2.6 and Table 7 of [IEEE 1588-2008]." SYNTAX INTEGER { atomicClock(16), -- 0x10 gps(32), -- 0x20 terrestrialRadio(48), -- 0x22 ptp(64), -- 0x40 ntp(80), -- 0x50 handSet(96), -- 0x60 other(144), -- 0x90 internalOscillator(160) -- 0xA0 } PtpClockTxModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Transmission mode. Unicast: Using unicast communication channel. Multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel" SYNTAX INTEGER { unicast(1), multicast(2), multicastmix(3) } PtpClockType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The clock types as defined in the MIB module description." REFERENCE "Section 6.5.1 PTP device types of [IEEE 1588-2008]." SYNTAX INTEGER { ordinaryClock(1), boundaryClock(2), transparentClock(3), boundaryNode(4) } -- -- Node definitions -- ptpMIBNotifs OBJECT IDENTIFIER ::= { atPtpMIB 0 } ptpMIBObjects OBJECT IDENTIFIER ::= { atPtpMIB 1 } ptpMIBConformance OBJECT IDENTIFIER ::= { atPtpMIB 2 } ptpMIBSystemInfo OBJECT IDENTIFIER ::= { ptpMIBObjects 1 } ptpMIBClockInfo OBJECT IDENTIFIER ::= { ptpMIBObjects 2 } ptpSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of count information about the PTP system for all domains." ::= { ptpMIBSystemInfo 1 } ptpSystemEntry OBJECT-TYPE SYNTAX PtpSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while the unconfiguration of the PTP clock removes it." INDEX { ptpDomainIndex, ptpInstanceIndex } ::= { ptpSystemTable 1 } PtpSystemEntry ::= SEQUENCE { ptpDomainIndex PtpClockDomainType, ptpInstanceIndex PtpClockInstanceType, ptpDomainClockPortsTotal Gauge32 } ptpDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchronize with each other using the PTP protocol. 0 Default domain 1 Alternate domain 1 2 Alternate domain 2 3 Alternate domain 3 4 - 127 User-defined domains 128 - 255 Reserved" ::= { ptpSystemEntry 1 } ptpInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the Clock for this domain." ::= { ptpSystemEntry 2 } ptpDomainClockPortsTotal OBJECT-TYPE SYNTAX Gauge32 UNITS "ptp ports" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of clock ports configured within a domain in the system." ::= { ptpSystemEntry 3 } ptpSystemDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpSystemDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP system for all clock modes -- ordinary, boundary or transparent." ::= { ptpMIBSystemInfo 2 } ptpSystemDomainEntry OBJECT-TYPE SYNTAX PtpSystemDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node." INDEX { ptpSystemDomainClockTypeIndex } ::= { ptpSystemDomainTable 1 } PtpSystemDomainEntry ::= SEQUENCE { ptpSystemDomainClockTypeIndex PtpClockType, ptpSystemDomainTotals Unsigned32 } ptpSystemDomainClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the Textual convention description." ::= { ptpSystemDomainEntry 1 } ptpSystemDomainTotals OBJECT-TYPE SYNTAX Unsigned32 UNITS "domains" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of PTP domains for this particular clock type configured in this node." ::= { ptpSystemDomainEntry 2 } ptpSystemProfile OBJECT-TYPE SYNTAX PtpClockProfileType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP Profile implemented on the system." REFERENCE "Section 19.3 PTP profiles of [IEEE 1588-2008]" ::= { ptpMIBSystemInfo 3 } ptpClockCurrentDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockCurrentDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock Current Datasets for all domains." ::= { ptpMIBClockInfo 1 } ptpClockCurrentDSEntry OBJECT-TYPE SYNTAX PtpClockCurrentDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single PTP clock Current Datasets for a domain." REFERENCE "[IEEE 1588-2008] Section 8.2.2 currentDS data set member specifications of [IEEE 1588-2008]" INDEX { ptpClockCurrentDSDomainIndex, ptpClockCurrentDSClockTypeIndex, ptpClockCurrentDSInstanceIndex } ::= { ptpClockCurrentDSTable 1 } PtpClockCurrentDSEntry ::= SEQUENCE { ptpClockCurrentDSDomainIndex PtpClockDomainType, ptpClockCurrentDSClockTypeIndex PtpClockType, ptpClockCurrentDSInstanceIndex PtpClockInstanceType, ptpClockCurrentDSStepsRemoved Unsigned32, ptpClockCurrentDSOffsetFromMaster PtpClockTimeInterval, ptpClockCurrentDSMeanPathDelay PtpClockTimeInterval } ptpClockCurrentDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpClockCurrentDSEntry 1 } ptpClockCurrentDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the Textual convention description." ::= { ptpClockCurrentDSEntry 2 } ptpClockCurrentDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockCurrentDSEntry 3 } ptpClockCurrentDSStepsRemoved OBJECT-TYPE SYNTAX Unsigned32 UNITS "Steps" MAX-ACCESS read-only STATUS current DESCRIPTION "The current clock dataset StepsRemoved value. This object specifies the distance measured by the number of Boundary clocks between the local clock and the Foreign master as indicated in the stepsRemoved field of Announce messages." REFERENCE "Section 8.2.2.2 stepsRemoved of [IEEE 1588-2008]" ::= { ptpClockCurrentDSEntry 4 } ptpClockCurrentDSOffsetFromMaster OBJECT-TYPE SYNTAX PtpClockTimeInterval UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock." REFERENCE "Section 8.2.2.3 currentDS.offsetFromMaster of [IEEE 1588-2008]" ::= { ptpClockCurrentDSEntry 5 } ptpClockCurrentDSMeanPathDelay OBJECT-TYPE SYNTAX PtpClockTimeInterval UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mechanism." REFERENCE "Section 8.2.2.4 currentDS.meanPathDelay of [IEEE 1588-2008]" ::= { ptpClockCurrentDSEntry 6 } ptpClockParentDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockParentDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock Parent Datasets for all domains." ::= { ptpMIBClockInfo 2 } ptpClockParentDSEntry OBJECT-TYPE SYNTAX PtpClockParentDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single PTP clock Parent Datasets for a domain." REFERENCE "Section 8.2.3 parentDS data set member specifications of [IEEE 1588-2008]" INDEX { ptpClockParentDSDomainIndex, ptpClockParentDSClockTypeIndex, ptpClockParentDSInstanceIndex } ::= { ptpClockParentDSTable 1 } PtpClockParentDSEntry ::= SEQUENCE { ptpClockParentDSDomainIndex PtpClockDomainType, ptpClockParentDSClockTypeIndex PtpClockType, ptpClockParentDSInstanceIndex PtpClockInstanceType, ptpClockParentDSParentPortIdentity OCTET STRING, ptpClockParentDSParentStats TruthValue, ptpClockParentDSOffset PtpClockIntervalBase2, ptpClockParentDSClockPhChRate Integer32, ptpClockParentDSGMClockIdentity PtpClockIdentity, ptpClockParentDSGMClockPriority1 Unsigned32, ptpClockParentDSGMClockPriority2 Unsigned32, ptpClockParentDSGMClockQualityClass PtpClockQualityClassType, ptpClockParentDSGMClockQualityAccuracy PtpClockQualityAccuracyType, ptpClockParentDSGMClockQualityOffset Unsigned32 } ptpClockParentDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpClockParentDSEntry 1 } ptpClockParentDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the Textual convention description." ::= { ptpClockParentDSEntry 2 } ptpClockParentDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockParentDSEntry 3 } ptpClockParentDSParentPortIdentity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock." REFERENCE "Section 8.2.3.2 parentDS.parentPortIdentity of [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 4 } ptpClockParentDSParentStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Parent Dataset ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured and are valid. A TRUE value shall indicate valid data." REFERENCE "Section 8.2.3.3 parentDS.parentStats of [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 5 } ptpClockParentDSOffset OBJECT-TYPE SYNTAX PtpClockIntervalBase2 (-128..127) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Parent Dataset ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local clock." REFERENCE "Section 8.2.3.4 parentDS.observedParentOffsetScaledLogVariance [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 6 } ptpClockParentDSClockPhChRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the clock's parent dataset ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measured by the slave clock." REFERENCE "Section 8.2.3.5 parentDS.observedParentClockPhaseChangeRate of [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 7 } ptpClockParentDSGMClockIdentity OBJECT-TYPE SYNTAX PtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parent dataset Grandmaster clock identity." REFERENCE "Section 8.2.3.6 parentDS.grandmasterIdentity of [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 8 } ptpClockParentDSGMClockPriority1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parent dataset Grandmaster clock priority1." REFERENCE "Section 8.2.3.8 parentDS.grandmasterPriority1 of [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 9 } ptpClockParentDSGMClockPriority2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parent dataset grandmaster clock priority2." REFERENCE "Section 8.2.3.9 parentDS.grandmasterPriority2 of [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 10 } ptpClockParentDSGMClockQualityClass OBJECT-TYPE SYNTAX PtpClockQualityClassType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parent dataset grandmaster clock quality class." REFERENCE "Section 8.2.3.7 parentDS.grandmasterClockQuality of [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 11 } ptpClockParentDSGMClockQualityAccuracy OBJECT-TYPE SYNTAX PtpClockQualityAccuracyType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parent dataset grandmaster clock quality accuracy." REFERENCE "Section 8.2.3.7 parentDS.grandmasterClockQuality of [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 12 } ptpClockParentDSGMClockQualityOffset OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parent dataset grandmaster clock quality offset." REFERENCE "Section 8.2.3.7 parentDS.grandmasterClockQuality of [IEEE 1588-2008]" ::= { ptpClockParentDSEntry 13 } ptpClockDefaultDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockDefaultDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock Default Datasets for all domains." ::= { ptpMIBClockInfo 3 } ptpClockDefaultDSEntry OBJECT-TYPE SYNTAX PtpClockDefaultDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single PTP clock Default Datasets for a domain." INDEX { ptpClockDefaultDSDomainIndex, ptpClockDefaultDSClockTypeIndex, ptpClockDefaultDSInstanceIndex } ::= { ptpClockDefaultDSTable 1 } PtpClockDefaultDSEntry ::= SEQUENCE { ptpClockDefaultDSDomainIndex PtpClockDomainType, ptpClockDefaultDSClockTypeIndex PtpClockType, ptpClockDefaultDSInstanceIndex PtpClockInstanceType, ptpClockDefaultDSTwoStepFlag TruthValue, ptpClockDefaultDSClockIdentity PtpClockIdentity, ptpClockDefaultDSPriority1 Unsigned32, ptpClockDefaultDSPriority2 Unsigned32, ptpClockDefaultDSSlaveOnly TruthValue, ptpClockDefaultDSQualityClass PtpClockQualityClassType, ptpClockDefaultDSQualityAccuracy PtpClockQualityAccuracyType, ptpClockDefaultDSQualityOffset Integer32 } ptpClockDefaultDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpClockDefaultDSEntry 1 } ptpClockDefaultDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the Textual convention description." ::= { ptpClockDefaultDSEntry 2 } ptpClockDefaultDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockDefaultDSEntry 3 } ptpClockDefaultDSTwoStepFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies whether the Two Step process is used." ::= { ptpClockDefaultDSEntry 4 } ptpClockDefaultDSClockIdentity OBJECT-TYPE SYNTAX PtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the default Datasets clock identity." ::= { ptpClockDefaultDSEntry 5 } ptpClockDefaultDSPriority1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the default Datasets clock Priority1." ::= { ptpClockDefaultDSEntry 6 } ptpClockDefaultDSPriority2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the default Datasets clock Priority2." ::= { ptpClockDefaultDSEntry 7 } ptpClockDefaultDSSlaveOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the SlaveOnly flag is set." ::= { ptpClockDefaultDSEntry 8 } ptpClockDefaultDSQualityClass OBJECT-TYPE SYNTAX PtpClockQualityClassType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the default dataset Quality Class." ::= { ptpClockDefaultDSEntry 9 } ptpClockDefaultDSQualityAccuracy OBJECT-TYPE SYNTAX PtpClockQualityAccuracyType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the default dataset Quality Accuracy." ::= { ptpClockDefaultDSEntry 10 } ptpClockDefaultDSQualityOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the default dataset Quality offset." ::= { ptpClockDefaultDSEntry 11 } ptpClockRunningTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockRunningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock Running Datasets for all domains." ::= { ptpMIBClockInfo 4 } ptpClockRunningEntry OBJECT-TYPE SYNTAX PtpClockRunningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single PTP clock running Datasets for a domain." INDEX { ptpClockRunningDomainIndex, ptpClockRunningClockTypeIndex, ptpClockRunningInstanceIndex } ::= { ptpClockRunningTable 1 } PtpClockRunningEntry ::= SEQUENCE { ptpClockRunningDomainIndex PtpClockDomainType, ptpClockRunningClockTypeIndex PtpClockType, ptpClockRunningInstanceIndex PtpClockInstanceType, ptpClockRunningState PtpClockStateType, ptpClockRunningPacketsSent Counter64, ptpClockRunningPacketsReceived Counter64 } ptpClockRunningDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a Logical group of PTP devices." ::= { ptpClockRunningEntry 1 } ptpClockRunningClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the Textual convention description." ::= { ptpClockRunningEntry 2 } ptpClockRunningInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockRunningEntry 3 } ptpClockRunningState OBJECT-TYPE SYNTAX PtpClockStateType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Clock state returned by a PTP engine which was described earlier. Freerun state. Applies to a slave device that is not locked to a master. This is the initial state a slave starts out with when it is not getting any PTP packets from the master, or because of some other input error (erroneous packets, etc). Holdover state. In this state the slave device is locked to a master but communication with the master has been lost or the timestamps in the PTP packets are incorrect. Since the slave was previously locked to the master, it can run in this state, with similar accuracy for some time. If communication with the master is not restored for an extended period (dependent on the clock implementation), the device should move to the FREERUN state. Acquiring state. The slave device is receiving packets from a master and is trying to acquire a lock. Freq_locked state. Slave device is locked to the Master with respect to frequency, but not phase aligned. Phase_aligned state. Locked to the master with respect to frequency and phase." ::= { ptpClockRunningEntry 4 } ptpClockRunningPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters are discontinuous." ::= { ptpClockRunningEntry 5 } ptpClockRunningPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters are discontinuous." ::= { ptpClockRunningEntry 6 } ptpClockTimePropertiesDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockTimePropertiesDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock time properties datasets for all domains." ::= { ptpMIBClockInfo 5 } ptpClockTimePropertiesDSEntry OBJECT-TYPE SYNTAX PtpClockTimePropertiesDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single PTP clock timeproperties Datasets for a domain." REFERENCE "Section 8.2.4 timePropertiesDS data set member specifications of [IEEE 1588-2008]" INDEX { ptpClockTimePropertiesDSDomainIndex, ptpClockTimePropertiesDSClockTypeIndex, ptpClockTimePropertiesDSInstanceIndex } ::= { ptpClockTimePropertiesDSTable 1 } PtpClockTimePropertiesDSEntry ::= SEQUENCE { ptpClockTimePropertiesDSDomainIndex PtpClockDomainType, ptpClockTimePropertiesDSClockTypeIndex PtpClockType, ptpClockTimePropertiesDSInstanceIndex PtpClockInstanceType, ptpClockTimePropertiesDSCurrentUTCOffsetValid TruthValue, ptpClockTimePropertiesDSCurrentUTCOffset Integer32, ptpClockTimePropertiesDSLeap59 TruthValue, ptpClockTimePropertiesDSLeap61 TruthValue, ptpClockTimePropertiesDSTimeTraceable TruthValue, ptpClockTimePropertiesDSFreqTraceable TruthValue, ptpClockTimePropertiesDSPTPTimescale TruthValue, ptpClockTimePropertiesDSSource PtpClockTimeSourceType } ptpClockTimePropertiesDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpClockTimePropertiesDSEntry 1 } ptpClockTimePropertiesDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the Textual convention description." ::= { ptpClockTimePropertiesDSEntry 2 } ptpClockTimePropertiesDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockTimePropertiesDSEntry 3 } ptpClockTimePropertiesDSCurrentUTCOffsetValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the timeproperties dataset value of whether the current UTC offset is valid." REFERENCE "Section 8.2.4.2 timePropertiesDS.currentUtcOffset of [IEEE 1588-2008]" ::= { ptpClockTimePropertiesDSEntry 4 } ptpClockTimePropertiesDSCurrentUTCOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the timeproperties dataset value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.currentUtcOffset is the offset between TAI and UTC; otherwise the value has no meaning. The value shall be in units of seconds. The initialization value shall be selected as follows: a) If the timePropertiesDS.ptpTimescale (see 8.2.4.8) is TRUE, the value is the value obtained from a primary reference if the value is known at the time of initialization, else, b) The value shall be the current number of leap seconds (7.2.3) when the node is designed." REFERENCE "Section 8.2.4.3 timePropertiesDS.currentUtcOffsetValid of [IEEE 1588-2008]" ::= { ptpClockTimePropertiesDSEntry 5 } ptpClockTimePropertiesDSLeap59 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Leap59 value in the clock Current Dataset." REFERENCE "Section 8.2.4.4 timePropertiesDS.leap59 of [IEEE 1588-2008]" ::= { ptpClockTimePropertiesDSEntry 6 } ptpClockTimePropertiesDSLeap61 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Leap61 value in the clock Current Dataset." REFERENCE "Section 8.2.4.5 timePropertiesDS.leap61 of [IEEE 1588-2008]" ::= { ptpClockTimePropertiesDSEntry 7 } ptpClockTimePropertiesDSTimeTraceable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Time Traceable value in the clock Current Dataset." REFERENCE "Section 8.2.4.6 timePropertiesDS.timeTraceable of [IEEE 1588-2008]" ::= { ptpClockTimePropertiesDSEntry 8 } ptpClockTimePropertiesDSFreqTraceable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Frequency Traceable value in the clock Current Dataset." REFERENCE "Section 8.2.4.7 timePropertiesDS.frequencyTraceable of [IEEE 1588-2008]" ::= { ptpClockTimePropertiesDSEntry 9 } ptpClockTimePropertiesDSPTPTimescale OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP Timescale value in the clock Current Dataset." REFERENCE "Section 8.2.4.8 timePropertiesDS.ptpTimescale of [IEEE 1588-2008]" ::= { ptpClockTimePropertiesDSEntry 10 } ptpClockTimePropertiesDSSource OBJECT-TYPE SYNTAX PtpClockTimeSourceType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Timesource value in the clock Current Dataset." REFERENCE "Section 8.2.4.9 timePropertiesDS.timeSource of [IEEE 1588-2008]" ::= { ptpClockTimePropertiesDSEntry 11 } ptpClockTransDefaultDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockTransDefaultDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP Transparent clock Default Datasets for all domains." ::= { ptpMIBClockInfo 6 } ptpClockTransDefaultDSEntry OBJECT-TYPE SYNTAX PtpClockTransDefaultDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single PTP Transparent clock Default Datasets for a domain." REFERENCE "Section 8.3.2 transparentClockDefaultDS data set member specifications of [IEEE 1588-2008]" INDEX { ptpClockTransDefaultDSDomainIndex, ptpClockTransDefaultDSInstanceIndex } ::= { ptpClockTransDefaultDSTable 1 } PtpClockTransDefaultDSEntry ::= SEQUENCE { ptpClockTransDefaultDSDomainIndex PtpClockDomainType, ptpClockTransDefaultDSInstanceIndex PtpClockInstanceType, ptpClockTransDefaultDSClockIdentity PtpClockIdentity, ptpClockTransDefaultDSNumOfPorts Counter32, ptpClockTransDefaultDSDelay PtpClockMechanismType, ptpClockTransDefaultDSPrimaryDomain PtpClockDomainType } ptpClockTransDefaultDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpClockTransDefaultDSEntry 1 } ptpClockTransDefaultDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockTransDefaultDSEntry 2 } ptpClockTransDefaultDSClockIdentity OBJECT-TYPE SYNTAX PtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of the clockIdentity attribute of the local clock." REFERENCE "Section 8.3.2.2.1 transparentClockDefaultDS.clockIdentity of [IEEE 1588-2008]" ::= { ptpClockTransDefaultDSEntry 3 } ptpClockTransDefaultDSNumOfPorts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the number of PTP ports of the device. These counters are discontinuous." REFERENCE "Section 8.3.2.2.2 transparentClockDefaultDS.numberPorts of [IEEE 1588-2008]" ::= { ptpClockTransDefaultDSEntry 4 } ptpClockTransDefaultDSDelay OBJECT-TYPE SYNTAX PtpClockMechanismType MAX-ACCESS read-only STATUS current DESCRIPTION "This object, if the transparent clock is an end-to-end transparent clock, has the value of E2E; if the transparent clock is a peer-to-peer transparent clock, the value shall be P2P." REFERENCE "Section 8.3.2.3.1 transparentClockDefaultDS.delayMechanism of [IEEE 1588-2008]" ::= { ptpClockTransDefaultDSEntry 5 } ptpClockTransDefaultDSPrimaryDomain OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of the primary syntonization domain. The initialization value shall be 0." REFERENCE "Section 8.3.2.3.2 transparentClockDefaultDS.primaryDomain of [IEEE 1588-2008]" ::= { ptpClockTransDefaultDSEntry 6 } ptpClockPortTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the clock ports for a particular domain." ::= { ptpMIBClockInfo 7 } ptpClockPortEntry OBJECT-TYPE SYNTAX PtpClockPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single clock port." INDEX { ptpClockPortDomainIndex, ptpClockPortClockTypeIndex, ptpClockPortClockInstanceIndex, ptpClockPortTablePortNumberIndex } ::= { ptpClockPortTable 1 } PtpClockPortEntry ::= SEQUENCE { ptpClockPortDomainIndex PtpClockDomainType, ptpClockPortClockTypeIndex PtpClockType, ptpClockPortClockInstanceIndex PtpClockInstanceType, ptpClockPortTablePortNumberIndex PtpClockPortNumber, ptpClockPortName DisplayString, ptpClockPortRole PtpClockRoleType, ptpClockPortSyncTwoStep TruthValue, ptpClockPortCurrentPeerAddressType AutonomousType, ptpClockPortCurrentPeerAddress PtpClockPortTransportTypeAddress, ptpClockPortNumOfAssociatedPorts Gauge32 } ptpClockPortDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpClockPortEntry 1 } ptpClockPortClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the Textual convention description." ::= { ptpClockPortEntry 2 } ptpClockPortClockInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockPortEntry 3 } ptpClockPortTablePortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP Portnumber for this port." ::= { ptpClockPortEntry 4 } ptpClockPortName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP clock port name configured on the node." ::= { ptpClockPortEntry 5 } ptpClockPortRole OBJECT-TYPE SYNTAX PtpClockRoleType MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the current role (slave/master) of the port." ::= { ptpClockPortEntry 6 } ptpClockPortSyncTwoStep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies that two-step clock operation between the PTP master and slave device is enabled." ::= { ptpClockPortEntry 7 } ptpClockPortCurrentPeerAddressType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current peer's network address type used for PTP communication." ::= { ptpClockPortEntry 8 } ptpClockPortCurrentPeerAddress OBJECT-TYPE SYNTAX PtpClockPortTransportTypeAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current peer's network address used for PTP communication." ::= { ptpClockPortEntry 9 } ptpClockPortNumOfAssociatedPorts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies - For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number of masters available to this slave port (might or might not be peered)." ::= { ptpClockPortEntry 10 } ptpClockPortDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockPortDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the clock ports dataset for a particular domain." ::= { ptpMIBClockInfo 8 } ptpClockPortDSEntry OBJECT-TYPE SYNTAX PtpClockPortDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing port dataset information for a single clock port." INDEX { ptpClockPortDSDomainIndex, ptpClockPortDSClockTypeIndex, ptpClockPortDSClockInstanceIndex, ptpClockPortDSPortNumberIndex } ::= { ptpClockPortDSTable 1 } PtpClockPortDSEntry ::= SEQUENCE { ptpClockPortDSDomainIndex PtpClockDomainType, ptpClockPortDSClockTypeIndex PtpClockType, ptpClockPortDSClockInstanceIndex PtpClockInstanceType, ptpClockPortDSPortNumberIndex PtpClockPortNumber, ptpClockPortDSName DisplayString, ptpClockPortDSPortIdentity OCTET STRING, ptpClockPortDSlogAnnouncementInterval PtpClockIntervalBase2, ptpClockPortDSAnnounceRctTimeout Integer32, ptpClockPortDSlogSyncInterval PtpClockIntervalBase2, ptpClockPortDSMinDelayReqInterval Integer32, ptpClockPortDSPeerDelayReqInterval Integer32, ptpClockPortDSDelayMech PtpClockMechanismType, ptpClockPortDSPeerMeanPathDelay PtpClockTimeInterval, ptpClockPortDSGrantDuration Unsigned32, ptpClockPortDSPTPVersion Unsigned32 } ptpClockPortDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpClockPortDSEntry 1 } ptpClockPortDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the Textual convention description." ::= { ptpClockPortDSEntry 2 } ptpClockPortDSClockInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockPortDSEntry 3 } ptpClockPortDSPortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP portnumber associated with this PTP port." ::= { ptpClockPortDSEntry 4 } ptpClockPortDSName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP clock port dataset name." ::= { ptpClockPortDSEntry 5 } ptpClockPortDSPortIdentity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP clock port Identity." ::= { ptpClockPortDSEntry 6 } ptpClockPortDSlogAnnouncementInterval OBJECT-TYPE SYNTAX PtpClockIntervalBase2 UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Announce message transmission interval associated with this clock port." ::= { ptpClockPortDSEntry 7 } ptpClockPortDSAnnounceRctTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Announce receipt timeout associated with this clock port." ::= { ptpClockPortDSEntry 8 } ptpClockPortDSlogSyncInterval OBJECT-TYPE SYNTAX PtpClockIntervalBase2 UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Sync message transmission interval." ::= { ptpClockPortDSEntry 9 } ptpClockPortDSMinDelayReqInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Delay_Req message transmission interval." ::= { ptpClockPortDSEntry 10 } ptpClockPortDSPeerDelayReqInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Pdelay_Req message transmission interval." ::= { ptpClockPortDSEntry 11 } ptpClockPortDSDelayMech OBJECT-TYPE SYNTAX PtpClockMechanismType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the delay mechanism used. If the clock is an end-to-end clock, the value of the is e2e, else if the clock is a peer to-peer clock, the value shall be p2p." ::= { ptpClockPortDSEntry 12 } ptpClockPortDSPeerMeanPathDelay OBJECT-TYPE SYNTAX PtpClockTimeInterval UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the peer meanPathDelay." ::= { ptpClockPortDSEntry 13 } ptpClockPortDSGrantDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the grant duration allocated by the master." ::= { ptpClockPortDSEntry 14 } ptpClockPortDSPTPVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP version being used." ::= { ptpClockPortDSEntry 15 } ptpClockPortRunningTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockPortRunningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the clock ports running datasets for a particular domain." ::= { ptpMIBClockInfo 9 } ptpClockPortRunningEntry OBJECT-TYPE SYNTAX PtpClockPortRunningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing running dataset information about a single clock port." INDEX { ptpClockPortRunningDomainIndex, ptpClockPortRunningClockTypeIndex, ptpClockPortRunningClockInstanceIndex, ptpClockPortRunningPortNumberIndex } ::= { ptpClockPortRunningTable 1 } PtpClockPortRunningEntry ::= SEQUENCE { ptpClockPortRunningDomainIndex PtpClockDomainType, ptpClockPortRunningClockTypeIndex PtpClockType, ptpClockPortRunningClockInstanceIndex PtpClockInstanceType, ptpClockPortRunningPortNumberIndex PtpClockPortNumber, ptpClockPortRunningName DisplayString, ptpClockPortRunningState PtpClockPortState, ptpClockPortRunningRole PtpClockRoleType, ptpClockPortRunningInterfaceIndex InterfaceIndexOrZero, ptpClockPortRunningTransport AutonomousType, ptpClockPortRunningEncapsulationType AutonomousType, ptpClockPortRunningTxMode PtpClockTxModeType, ptpClockPortRunningRxMode PtpClockTxModeType, ptpClockPortRunningPacketsReceived Counter64, ptpClockPortRunningPacketsSent Counter64 } ptpClockPortRunningDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpClockPortRunningEntry 1 } ptpClockPortRunningClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the Textual convention description." ::= { ptpClockPortRunningEntry 2 } ptpClockPortRunningClockInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockPortRunningEntry 3 } ptpClockPortRunningPortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP portnumber associated with this clock port." ::= { ptpClockPortRunningEntry 4 } ptpClockPortRunningName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP clock port name." ::= { ptpClockPortRunningEntry 5 } ptpClockPortRunningState OBJECT-TYPE SYNTAX PtpClockPortState MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the port state returned by PTP engine. initializing - In this state a port initializes its data sets, hardware, and communication facilities. faulty - The fault state of the protocol. disabled - The port shall not place any messages on its communication path. listening - The port is waiting for the announceReceiptTimeout to expire or to receive an Announce message from a master. preMaster - The port shall behave in all respects as though it were in the MASTER state except that it shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, signaling, or management messages. master - The port is behaving as a master port. passive - The port shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages, or management messages that are a required response to another management message uncalibrated - The local port is preparing to synchronize to the master port. slave - The port is synchronizing to the selected master port." ::= { ptpClockPortRunningEntry 6 } ptpClockPortRunningRole OBJECT-TYPE SYNTAX PtpClockRoleType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Clock Role." ::= { ptpClockPortRunningEntry 7 } ptpClockPortRunningInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the interface on the node being used by the PTP Clock for PTP communication." ::= { ptpClockPortRunningEntry 8 } ptpClockPortRunningTransport OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the transport protocol being used for PTP communication (the mapping used)." ::= { ptpClockPortRunningEntry 9 } ptpClockPortRunningEncapsulationType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN, Pseudowire encapsulation...) for the PTP messages." ::= { ptpClockPortRunningEntry 10 } ptpClockPortRunningTxMode OBJECT-TYPE SYNTAX PtpClockTxModeType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the clock transmission mode as unicast: Using unicast communication channel. multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel" ::= { ptpClockPortRunningEntry 11 } ptpClockPortRunningRxMode OBJECT-TYPE SYNTAX PtpClockTxModeType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the clock receive mode as unicast: Using unicast communication channel. multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel" ::= { ptpClockPortRunningEntry 12 } ptpClockPortRunningPacketsReceived OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the packets received on the clock port (cumulative). These counters are discontinuous." ::= { ptpClockPortRunningEntry 13 } ptpClockPortRunningPacketsSent OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the packets sent on the clock port (cumulative). These counters are discontinuous." ::= { ptpClockPortRunningEntry 14 } ptpClockPortTransDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockPortTransDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the Transparent clock ports running dataset for a particular domain." ::= { ptpMIBClockInfo 10 } ptpClockPortTransDSEntry OBJECT-TYPE SYNTAX PtpClockPortTransDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing clock port Transparent dataset information about a single clock port" INDEX { ptpClockPortTransDSDomainIndex, ptpClockPortTransDSInstanceIndex, ptpClockPortTransDSPortNumberIndex } ::= { ptpClockPortTransDSTable 1 } PtpClockPortTransDSEntry ::= SEQUENCE { ptpClockPortTransDSDomainIndex PtpClockDomainType, ptpClockPortTransDSInstanceIndex PtpClockInstanceType, ptpClockPortTransDSPortNumberIndex PtpClockPortNumber, ptpClockPortTransDSPortIdentity PtpClockIdentity, ptpClockPortTransDSlogMinPdelayReqInt PtpClockIntervalBase2, ptpClockPortTransDSFaultyFlag TruthValue, ptpClockPortTransDSPeerMeanPathDelay PtpClockTimeInterval } ptpClockPortTransDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a Logical group of PTP devices." ::= { ptpClockPortTransDSEntry 1 } ptpClockPortTransDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockPortTransDSEntry 2 } ptpClockPortTransDSPortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP port number associated with this port." REFERENCE "Section 7.5.2 Port Identity of [IEEE 1588-2008]" ::= { ptpClockPortTransDSEntry 3 } ptpClockPortTransDSPortIdentity OBJECT-TYPE SYNTAX PtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of the PortIdentity attribute of the local port." REFERENCE "Section 8.3.3.2.1 transparentClockPortDS.portIdentity of [IEEE 1588-2008]" ::= { ptpClockPortTransDSEntry 4 } ptpClockPortTransDSlogMinPdelayReqInt OBJECT-TYPE SYNTAX PtpClockIntervalBase2 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval." REFERENCE "Section 8.3.3.3.1 transparentClockPortDS.logMinPdelayReqInterval of [IEEE 1588-2008]" ::= { ptpClockPortTransDSEntry 5 } ptpClockPortTransDSFaultyFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally." REFERENCE "Section 8.3.3.3.2 transparentClockPortDS.faultyFlag of [IEEE 1588-2008]" ::= { ptpClockPortTransDSEntry 6 } ptpClockPortTransDSPeerMeanPathDelay OBJECT-TYPE SYNTAX PtpClockTimeInterval UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies, if the delayMechanism used is P2P, the value of the estimate of the current one-way propagation delay, i.e., on the link attached to this port, computed using the peer delay mechanism. If the value of the delayMechanism used is E2E, then the value will be zero." REFERENCE "Section 8.3.3.3.3 transparentClockPortDS.peerMeanPathDelay of [IEEE 1588-2008]" ::= { ptpClockPortTransDSEntry 7 } ptpClockPortAssociateTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpClockPortAssociateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about a given port's associated ports. For a master port: multiple slave ports that have established sessions with the current master port. For a slave port: the list of masters available for a given slave port. Session information (packets, errors) to be displayed based on availability and scenario." ::= { ptpMIBClockInfo 11 } ptpWellKnownTransportTypes OBJECT IDENTIFIER ::= { ptpMIBClockInfo 12 } ptpTransportTypeIPversion4 OBJECT-IDENTITY STATUS current DESCRIPTION "IP version 4" ::= { ptpWellKnownTransportTypes 1 } ptpTransportTypeIPversion6 OBJECT-IDENTITY STATUS current DESCRIPTION "IP version 6" ::= { ptpWellKnownTransportTypes 2 } ptpTransportTypeEthernet OBJECT-IDENTITY STATUS current DESCRIPTION "Ethernet" ::= { ptpWellKnownTransportTypes 3 } ptpTransportTypeDeviceNET OBJECT-IDENTITY STATUS current DESCRIPTION "Device NET" ::= { ptpWellKnownTransportTypes 4 } ptpTransportTypeControlNET OBJECT-IDENTITY STATUS current DESCRIPTION "Control NET" ::= { ptpWellKnownTransportTypes 5 } ptpTransportTypeIEC61158 OBJECT-IDENTITY STATUS current DESCRIPTION "IEC61158" ::= { ptpWellKnownTransportTypes 6 } -- -- Well Known encapsulation types for PTP communication. -- ptpWellKnownEncapsulationTypes OBJECT IDENTIFIER ::= { ptpMIBClockInfo 13 } ptpEncapsulationTypeEthernet OBJECT-IDENTITY STATUS current DESCRIPTION "Ethernet Encapsulation type." ::= { ptpWellKnownEncapsulationTypes 1 } ptpEncapsulationTypeVLAN OBJECT-IDENTITY STATUS current DESCRIPTION "VLAN Encapsulation type." ::= { ptpWellKnownEncapsulationTypes 2 } ptpEncapsulationTypeUDPIPLSP OBJECT-IDENTITY STATUS current DESCRIPTION "UDP/IP over MPLS Encapsulation type." ::= { ptpWellKnownEncapsulationTypes 3 } ptpEncapsulationTypePWUDPIPLSP OBJECT-IDENTITY STATUS current DESCRIPTION "UDP/IP Pseudowire over MPLS Encapsulation type." ::= { ptpWellKnownEncapsulationTypes 4 } ptpEncapsulationTypePWEthernetLSP OBJECT-IDENTITY STATUS current DESCRIPTION "Ethernet Pseudowire over MPLS Encapsulation type." ::= { ptpWellKnownEncapsulationTypes 5 } ptpClockPortAssociateEntry OBJECT-TYPE SYNTAX PtpClockPortAssociateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single associated port for the given clockport." INDEX { ptpClockPortCurrentDomainIndex, ptpClockPortCurrentClockTypeIndex, ptpClockPortCurrentClockInstanceIndex, ptpClockPortCurrentPortNumberIndex, ptpClockPortAssociatePortIndex } ::= { ptpClockPortAssociateTable 1 } PtpClockPortAssociateEntry ::= SEQUENCE { ptpClockPortCurrentDomainIndex PtpClockDomainType, ptpClockPortCurrentClockTypeIndex PtpClockType, ptpClockPortCurrentClockInstanceIndex PtpClockInstanceType, ptpClockPortCurrentPortNumberIndex PtpClockPortNumber, ptpClockPortAssociatePortIndex Unsigned32, ptpClockPortAssociateAddressType AutonomousType, ptpClockPortAssociateAddress PtpClockPortTransportTypeAddress, ptpClockPortAssociatePacketsSent Counter64, ptpClockPortAssociatePacketsReceived Counter64, ptpClockPortAssociateInErrors Counter64, ptpClockPortAssociateOutErrors Counter64 } ptpClockPortCurrentDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the given port's domain number." ::= { ptpClockPortAssociateEntry 1 } ptpClockPortCurrentClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the given port's clock type." ::= { ptpClockPortAssociateEntry 2 } ptpClockPortCurrentClockInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpClockPortAssociateEntry 3 } ptpClockPortCurrentPortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP Port Number for the given port." ::= { ptpClockPortAssociateEntry 4 } ptpClockPortAssociatePortIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the associated port's serial number in the current port's context." ::= { ptpClockPortAssociateEntry 5 } ptpClockPortAssociateAddressType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpWellKnownTransportTypes will be used in the values contained in the OCTET STRING." ::= { ptpClockPortAssociateEntry 6 } ptpClockPortAssociateAddress OBJECT-TYPE SYNTAX PtpClockPortTransportTypeAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the peer port's network address used for PTP communication." ::= { ptpClockPortAssociateEntry 7 } ptpClockPortAssociatePacketsSent OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent to this peer port from the current port. These counters are discontinuous." ::= { ptpClockPortAssociateEntry 8 } ptpClockPortAssociatePacketsReceived OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received from this peer port by the current port. These counters are discontinuous." ::= { ptpClockPortAssociateEntry 9 } ptpClockPortAssociateInErrors OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the input errors associated with the peer port. These counters are discontinuous." ::= { ptpClockPortAssociateEntry 10 } ptpClockPortAssociateOutErrors OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the output errors associated with the peer port. These counters are discontinuous." ::= { ptpClockPortAssociateEntry 11 } -- -- Conformance Information Definition -- ptpMIBCompliances OBJECT IDENTIFIER ::= { ptpMIBConformance 1 } ptpMIBGroups OBJECT IDENTIFIER ::= { ptpMIBConformance 2 } ptpMIBCompliancesSystemInfo MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide system level information of clock devices. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { ptpMIBSystemInfoGroup } ::= { ptpMIBCompliances 1 } ptpMIBCompliancesClockInfo MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock related information. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { ptpMIBClockCurrentDSGroup, ptpMIBClockParentDSGroup, ptpMIBClockDefaultDSGroup, ptpMIBClockRunningGroup, ptpMIBClockTimepropertiesGroup } ::= { ptpMIBCompliances 2 } ptpMIBCompliancesClockPortInfo MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock port related information. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { ptpMIBClockPortGroup, ptpMIBClockPortDSGroup, ptpMIBClockPortRunningGroup, ptpMIBClockPortAssociateGroup } ::= { ptpMIBCompliances 3 } ptpMIBCompliancesTransparentClockInfo MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide Transparent clock related information. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { ptpMIBClockTranparentDSGroup, ptpMIBClockPortTransDSGroup } ::= { ptpMIBCompliances 4 } ptpMIBSystemInfoGroup OBJECT-GROUP OBJECTS { ptpSystemDomainTotals, ptpDomainClockPortsTotal, ptpSystemProfile } STATUS current DESCRIPTION "Group which aggregates objects describing system-wide information" ::= { ptpMIBGroups 1 } ptpMIBClockCurrentDSGroup OBJECT-GROUP OBJECTS { ptpClockCurrentDSStepsRemoved, ptpClockCurrentDSOffsetFromMaster, ptpClockCurrentDSMeanPathDelay } STATUS current DESCRIPTION "Group which aggregates objects describing PTP Current Dataset information" ::= { ptpMIBGroups 2 } ptpMIBClockParentDSGroup OBJECT-GROUP OBJECTS { ptpClockParentDSParentPortIdentity, ptpClockParentDSParentStats, ptpClockParentDSOffset, ptpClockParentDSClockPhChRate, ptpClockParentDSGMClockIdentity, ptpClockParentDSGMClockPriority1, ptpClockParentDSGMClockPriority2, ptpClockParentDSGMClockQualityClass, ptpClockParentDSGMClockQualityAccuracy, ptpClockParentDSGMClockQualityOffset } STATUS current DESCRIPTION "Group which aggregates objects describing PTP Parent Dataset information" ::= { ptpMIBGroups 3 } ptpMIBClockDefaultDSGroup OBJECT-GROUP OBJECTS { ptpClockDefaultDSTwoStepFlag, ptpClockDefaultDSClockIdentity, ptpClockDefaultDSPriority1, ptpClockDefaultDSPriority2, ptpClockDefaultDSSlaveOnly, ptpClockDefaultDSQualityClass, ptpClockDefaultDSQualityAccuracy, ptpClockDefaultDSQualityOffset } STATUS current DESCRIPTION "Group which aggregates objects describing PTP Default Dataset information" ::= { ptpMIBGroups 4 } ptpMIBClockRunningGroup OBJECT-GROUP OBJECTS { ptpClockRunningState, ptpClockRunningPacketsSent, ptpClockRunningPacketsReceived } STATUS current DESCRIPTION "Group which aggregates objects describing PTP running state information" ::= { ptpMIBGroups 5 } ptpMIBClockTimepropertiesGroup OBJECT-GROUP OBJECTS { ptpClockTimePropertiesDSCurrentUTCOffsetValid, ptpClockTimePropertiesDSCurrentUTCOffset, ptpClockTimePropertiesDSLeap59, ptpClockTimePropertiesDSLeap61, ptpClockTimePropertiesDSTimeTraceable, ptpClockTimePropertiesDSFreqTraceable, ptpClockTimePropertiesDSPTPTimescale, ptpClockTimePropertiesDSSource } STATUS current DESCRIPTION "Group which aggregates objects describing PTP Time Properties information" ::= { ptpMIBGroups 6 } ptpMIBClockTranparentDSGroup OBJECT-GROUP OBJECTS { ptpClockTransDefaultDSClockIdentity, ptpClockTransDefaultDSNumOfPorts, ptpClockTransDefaultDSDelay, ptpClockTransDefaultDSPrimaryDomain } STATUS current DESCRIPTION "Group which aggregates objects describing PTP Transparent Dataset information" ::= { ptpMIBGroups 7 } ptpMIBClockPortGroup OBJECT-GROUP OBJECTS { ptpClockPortName, ptpClockPortSyncTwoStep, ptpClockPortCurrentPeerAddress, ptpClockPortNumOfAssociatedPorts, ptpClockPortCurrentPeerAddressType, ptpClockPortRole } STATUS current DESCRIPTION "Group which aggregates objects describing information for a given PTP Port." ::= { ptpMIBGroups 8 } ptpMIBClockPortDSGroup OBJECT-GROUP OBJECTS { ptpClockPortDSName, ptpClockPortDSPortIdentity, ptpClockPortDSlogAnnouncementInterval, ptpClockPortDSAnnounceRctTimeout, ptpClockPortDSlogSyncInterval, ptpClockPortDSMinDelayReqInterval, ptpClockPortDSPeerDelayReqInterval, ptpClockPortDSDelayMech, ptpClockPortDSPeerMeanPathDelay, ptpClockPortDSGrantDuration, ptpClockPortDSPTPVersion } STATUS current DESCRIPTION "Group which aggregates objects describing PTP Port Dataset information" ::= { ptpMIBGroups 9 } ptpMIBClockPortRunningGroup OBJECT-GROUP OBJECTS { ptpClockPortRunningName, ptpClockPortRunningState, ptpClockPortRunningRole, ptpClockPortRunningInterfaceIndex, ptpClockPortRunningTransport, ptpClockPortRunningEncapsulationType, ptpClockPortRunningTxMode, ptpClockPortRunningRxMode, ptpClockPortRunningPacketsReceived, ptpClockPortRunningPacketsSent } STATUS current DESCRIPTION "Group which aggregates objects describing PTP running interface information" ::= { ptpMIBGroups 10 } ptpMIBClockPortTransDSGroup OBJECT-GROUP OBJECTS { ptpClockPortTransDSPortIdentity, ptpClockPortTransDSlogMinPdelayReqInt, ptpClockPortTransDSFaultyFlag, ptpClockPortTransDSPeerMeanPathDelay } STATUS current DESCRIPTION "Group which aggregates objects describing PTP TransparentDS information" ::= { ptpMIBGroups 11 } ptpMIBClockPortAssociateGroup OBJECT-GROUP OBJECTS { ptpClockPortAssociatePacketsSent, ptpClockPortAssociatePacketsReceived, ptpClockPortAssociateAddress, ptpClockPortAssociateAddressType, ptpClockPortAssociateInErrors, ptpClockPortAssociateOutErrors } STATUS current DESCRIPTION "Group which aggregates objects describing information on peer PTP ports for a given PTP clock-port." ::= { ptpMIBGroups 12 } END -- -- at-ptp.mib --