-- ***************************************************************** -- BDCOM-MEMORY-POOL-MIB -- -- October 2003 -- -- Copyright (c) 2003 by BDCOM, Inc. -- All rights reserved. -- ***************************************************************** BDCOM-MEMORY-POOL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF bdMgmt FROM BDCOM-SMI Percent FROM BDCOM-QOS-PIB-MIB; bdcomMemoryPoolMIB MODULE-IDENTITY LAST-UPDATED "200310160000Z" ORGANIZATION "BDCOM, Inc." CONTACT-INFO " Tel: +86-21-50800666 Postal: No.123,Juli RD,Zhangjiang Hitech Park, Shanghai Baud Data Communication Corporation Inc, Shanghai City 201203, P.R.C " DESCRIPTION "MIB module for monitoring memory pools" REVISION "200310160000Z" DESCRIPTION "Initial version of this MIB." ::= { bdMgmt 48 } BDCOMMemoryPoolTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the different types of memory pools that may be present in a managed device. Memory pools can be roughly categorized into two groups, predefined pools and dynamic pools. The following pool types are currently predefined: 1: processor memory 2: i/o memory 3: pci memory 4: fast memory 5: multibus memory Dynamic pools will have a pool type value greater than any of the predefined types listed above. Note that only the processor pool is required to be supported by all devices. Support for other pool types is dependent on the device being managed." SYNTAX Integer32 (1..65535) bdcomMemoryPoolObjects OBJECT IDENTIFIER ::= { bdcomMemoryPoolMIB 1 } bdcomMemoryPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF BDCOMMemoryPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of memory pool monitoring entries." ::= { bdcomMemoryPoolObjects 1 } bdcomMemoryPoolEntry OBJECT-TYPE SYNTAX BDCOMMemoryPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the memory pool monitoring table." INDEX { bdcomMemoryPoolType } ::= { bdcomMemoryPoolTable 1 } BDCOMMemoryPoolEntry ::= SEQUENCE { bdcomMemoryPoolType BDCOMMemoryPoolTypes, bdcomMemoryPoolName DisplayString, bdcomMemoryPoolAlternate Integer32, bdcomMemoryPoolValid TruthValue, bdcomMemoryPoolUsed Gauge32, bdcomMemoryPoolFree Gauge32, bdcomMemoryPoolLargestFree Gauge32 } bdcomMemoryPoolType OBJECT-TYPE SYNTAX BDCOMMemoryPoolTypes MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of memory pool for which this entry contains information." ::= { bdcomMemoryPoolEntry 1 } bdcomMemoryPoolName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual name assigned to the memory pool. This object is suitable for output to a human operator, and may also be used to distinguish among the various pool types, especially among dynamic pools." ::= { bdcomMemoryPoolEntry 2 } bdcomMemoryPoolAlternate OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether or not this memory pool has an alternate pool configured. Alternate pools are used for fallback when the current pool runs out of memory. If an instance of this object has a value of zero, then this pool does not have an alternate. Otherwise the value of this object is the same as the value of bdcomMemoryPoolType of the alternate pool." ::= { bdcomMemoryPoolEntry 3 } bdcomMemoryPoolValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether or not the remaining objects in this entry contain accurate data. If an instance of this object has the value false (which in and of itself indicates an internal error condition), the values of the remaining objects in the conceptual row may contain inaccurate information (specifically, the reported values may be less than the actual values)." ::= { bdcomMemoryPoolEntry 4 } bdcomMemoryPoolUsed OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device." ::= { bdcomMemoryPoolEntry 5 } bdcomMemoryPoolFree OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes from the memory pool that are currently unused on the managed device. Note that the sum of bdcomMemoryPoolUsed and bdcomMemoryPoolFree is the total amount of memory in the pool" ::= { bdcomMemoryPoolEntry 6 } bdcomMemoryPoolLargestFree OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the largest number of contiguous bytes from the memory pool that are currently unused on the managed device." ::= { bdcomMemoryPoolEntry 7 } bdcomMemoryPoolUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF BDCOMMemoryPoolUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of memory pool utilization entries. Each of the objects provides a general idea of how much of the memory pool has been used over a given period of time. It is determined as a weighted decaying average." ::= { bdcomMemoryPoolObjects 2 } bdcomMemoryPoolUtilizationEntry OBJECT-TYPE SYNTAX BDCOMMemoryPoolUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the memory pool utilization table." AUGMENTS { bdcomMemoryPoolEntry } ::= { bdcomMemoryPoolUtilizationTable 1 } BDCOMMemoryPoolUtilizationEntry ::= SEQUENCE { bdcomMemoryPoolUtilization1Min Percent, bdcomMemoryPoolUtilization5Min Percent, bdcomMemoryPoolUtilization10Min Percent } bdcomMemoryPoolUtilization1Min OBJECT-TYPE SYNTAX Percent MAX-ACCESS read-only STATUS current DESCRIPTION "This is the memory pool utilization for 1 minute." ::= { bdcomMemoryPoolUtilizationEntry 1 } bdcomMemoryPoolUtilization5Min OBJECT-TYPE SYNTAX Percent MAX-ACCESS read-only STATUS current DESCRIPTION "This is the memory pool utilization for 5 minutes." ::= { bdcomMemoryPoolUtilizationEntry 2 } bdcomMemoryPoolUtilization10Min OBJECT-TYPE SYNTAX Percent MAX-ACCESS read-only STATUS current DESCRIPTION "This is the memory pool utilization for 10 minutes." ::= { bdcomMemoryPoolUtilizationEntry 3 } -- notifications bdcomMemoryPoolNotifications OBJECT IDENTIFIER ::= { bdcomMemoryPoolMIB 2 } -- (no notifications are currently defined) -- conformance information bdcomMemoryPoolConformance OBJECT IDENTIFIER ::= { bdcomMemoryPoolMIB 3 } bdcomMemoryPoolCompliances OBJECT IDENTIFIER ::= { bdcomMemoryPoolConformance 1 } bdcomMemoryPoolGroups OBJECT IDENTIFIER ::= { bdcomMemoryPoolConformance 2 } -- compliance statements bdcomMemoryPoolCompliance MODULE-COMPLIANCE STATUS deprecated -- superceded by bdcomMemoryPoolComplianceRev1 DESCRIPTION "The compliance statement for entities which implement the BDCOM Memory Pool MIB" MODULE -- this module MANDATORY-GROUPS { bdcomMemoryPoolGroup } ::= { bdcomMemoryPoolCompliances 1 } bdcomMemoryPoolComplianceRev1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the BDCOM Memory Pool MIB" MODULE -- this module MANDATORY-GROUPS { bdcomMemoryPoolGroup } GROUP bdcomMemoryPoolUtilizationGroup DESCRIPTION "Per memory pool utilization statistics is mandatory for the managed system that supports memory pool utilization." ::= { bdcomMemoryPoolCompliances 2 } -- units of conformance bdcomMemoryPoolGroup OBJECT-GROUP OBJECTS { bdcomMemoryPoolName, bdcomMemoryPoolAlternate, bdcomMemoryPoolValid, bdcomMemoryPoolUsed, bdcomMemoryPoolFree, bdcomMemoryPoolLargestFree } STATUS current DESCRIPTION "A collection of objects providing memory pool monitoring." ::= { bdcomMemoryPoolGroups 1 } bdcomMemoryPoolUtilizationGroup OBJECT-GROUP OBJECTS { bdcomMemoryPoolUtilization1Min, bdcomMemoryPoolUtilization5Min, bdcomMemoryPoolUtilization10Min } STATUS current DESCRIPTION "An optional group providing a collection of memory pool utilization objects." ::= { bdcomMemoryPoolGroups 2 } END