-- ***************************************************************** -- BDCOM-PROCESS-MIB.my: MIB for CPU and process statistics -- -- October 2003 -- -- Copyright (c) 2003 by BDCOM, Inc. -- All rights reserved. -- ***************************************************************** -- BDCOM-PROCESS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32 FROM SNMPv2-SMI TimeStamp, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF bdMgmt FROM BDCOM-SMI Unsigned32 FROM SNMPv2-SMI EntPhysicalIndexOrZero FROM BDCOM-TC; bdcomProcessMIB MODULE-IDENTITY LAST-UPDATED "200311060000Z" ORGANIZATION "BDCOM, Inc." CONTACT-INFO " Tel: +86-21-50800666 Postal: No.123,Juli RD,Zhangjiang Hitech Park, Shanghai Baud Data Communication Corporation Inc, Shanghai City 201203, P.R.C " DESCRIPTION "The MIB module to describe active system processes." REVISION "200310160000Z" DESCRIPTION "Initial version of this MIB." ::= { bdMgmt 109 } -- This MIB displays memory and CPU utilization on cisco devices. CPU -- utilization will give a general idea of how busy the processor is. -- The numbers are a ratio of the current idle time over the longest -- idle time. Please note that this information should be used as an -- estimate only. bdcomProcessMIBObjects OBJECT IDENTIFIER ::= { bdcomProcessMIB 1 } bdpmCPU OBJECT IDENTIFIER ::= { bdcomProcessMIBObjects 1 } bdpmProcess OBJECT IDENTIFIER ::= { bdcomProcessMIBObjects 2 } --BDCOM CPU Total Table bdpmCPUTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF BdpmCPUTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of overall CPU statistics. " ::= { bdpmCPU 1 } bdpmCPUTotalEntry OBJECT-TYPE SYNTAX BdpmCPUTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Overall information about the CPU load. Entries in this table come and go as CPUs are added and removed from the system." INDEX { bdpmCPUTotalIndex } ::= { bdpmCPUTotalTable 1 } BdpmCPUTotalEntry ::= SEQUENCE { bdpmCPUTotalIndex Unsigned32, bdpmCPUTotalPhysicalIndex EntPhysicalIndexOrZero, bdpmCPUTotal5sec Gauge32, bdpmCPUTotal1min Gauge32, bdpmCPUTotal5min Gauge32 } bdpmCPUTotalIndex OBJECT-TYPE SYNTAX Unsigned32 (1.. 4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely represents a CPU (or group of CPUs) whose CPU load information is reported by a row in this table. This index is assigned arbitrarily by the engine and is not saved over reboots." ::= { bdpmCPUTotalEntry 1 } bdpmCPUTotalPhysicalIndex OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero." ::= { bdpmCPUTotalEntry 2 } bdpmCPUTotal5sec OBJECT-TYPE SYNTAX Gauge32 (1..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the last 5 second period. This object obsoletes the busyPer object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by bdpmCPUTotal5secRev which has the changed range of value (0..100)." ::= { bdpmCPUTotalEntry 3 } bdpmCPUTotal1min OBJECT-TYPE SYNTAX Gauge32 (1..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the last 1 minute period. This object obsoletes the avgBusy1 object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by bdpmCPUTotal1minRev which has the changed range of value (0..100)." ::= { bdpmCPUTotalEntry 4 } bdpmCPUTotal5min OBJECT-TYPE SYNTAX Gauge32 (1..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the last 5 minute period. This object deprecates the avgBusy5 object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by bdpmCPUTotal5minRev which has the changed range of value (0..100)." ::= { bdpmCPUTotalEntry 5 } -- BDCOM Processes Common Table bdpmProcessTable OBJECT-TYPE SYNTAX SEQUENCE OF BdpmProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of generic information on all active processes on this device." ::= { bdpmProcess 1 } bdpmProcessEntry OBJECT-TYPE SYNTAX BdpmProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Generic information about an active process on this device. Entries in this table come and go as processes are created and destroyed by the device." INDEX { bdpmCPUTotalIndex, bdpmProcessPID } ::= { bdpmProcessTable 1 } BdpmProcessEntry ::= SEQUENCE { bdpmProcessPID Unsigned32, bdpmProcessName DisplayString, bdpmProcessPriority INTEGER, bdpmProcessTimeCreated TimeStamp } bdpmProcessPID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the process ID. bdpmProcessTimeCreated should be checked against the last time it was polled, and if it has changed the PID has been reused and the entire entry should be polled again. The process IDs are discrete." ::= { bdpmProcessEntry 1 } bdpmProcessName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name associated with this process. If the name is longer than 32 characters, it will be truncated to the first 31 characters, and a `*' will be appended as the last character to imply this is a truncated process name." ::= { bdpmProcessEntry 2 } bdpmProcessPriority OBJECT-TYPE SYNTAX INTEGER { critical(0), veryhigh(55), high(60), normal(128), low(180), verylow(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The priority level at which the process is running. This object is deprecated by bdpmProcExtPriorityRev." ::= { bdpmProcessEntry 3 } bdpmProcessTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the process was created. The process ID and the time when the process was created, uniquely identifies a process." ::= { bdpmProcessEntry 4 } -- notifications bdcomProcessMIBNotifPrefix OBJECT IDENTIFIER ::= { bdcomProcessMIB 2 } bdcomProcessMIBNotifs OBJECT IDENTIFIER ::= { bdcomProcessMIBNotifPrefix 0 } -- (no notifications are currently defined) -- conformance information -- --bdcomProcessMIBConformance OBJECT IDENTIFIER ::= { bdcomProcessMIB 3 } --bdpmCompliances OBJECT IDENTIFIER ::= { bdcomProcessMIBConformance 1 } --bdpmGroups OBJECT IDENTIFIER ::= { bdcomProcessMIBConformance 2 } -- --bdProcessMIBCompliance MODULE-COMPLIANCE -- STATUS deprecated -- DESCRIPTION -- "The compliance statement for entities which implement -- the BDCOM Process MIB. This is deprecated and new -- compliance bdProcessMIBComplianceRev is added." -- this module -- MODULE -- MANDATORY-GROUPS { bdpmCPUTotalGroup, bdpmProcessGroup } -- -- -- GROUP bdpmProcessExtGroup -- DESCRIPTION -- "The bdpmProcessExtGroup is optional for all entities." -- -- OBJECT bdpmProcExtPriority -- MIN-ACCESS read-only -- DESCRIPTION "Write access is not required." -- -- ::= { bdpmCompliances 1 } -- --bdProcessMIBComplianceRev MODULE-COMPLIANCE -- STATUS current -- DESCRIPTION -- "The compliance statement for entities which implement -- the BDCOM Process MIB. This compliance module -- deprecates bdProcessMIBCompliance." -- this module -- MODULE -- MANDATORY-GROUPS { bdpmCPUTotalGroupRev, bdpmProcessGroupRev} -- -- GROUP bdpmProcessExtGroupRev -- DESCRIPTION -- "The bdpmProcessExtGroupRev is optional for all -- entities. This object is defined after deprecating -- bdpmProcessExtGroup." -- -- ::= { bdpmCompliances 2 } -- -- units of conformance -- --bdpmCPUTotalGroup OBJECT-GROUP -- OBJECTS { -- bdpmCPUTotalPhysicalIndex, -- bdpmCPUTotal5sec, -- bdpmCPUTotal1min, -- bdpmCPUTotal5min -- } -- STATUS deprecated -- DESCRIPTION -- "A collection of objects providing CPU load monitoring -- information. This group is mandatory for all cisco devices. -- This group is deprecated since the objects bdpmCPUTotal5sec, -- bdpmCPUTotal1min and bdpmCPUTotal5min are -- deprecated. A new object bdpmCPUTotalGroupRev is -- added in place of it." -- ::= { bdpmGroups 1 } -- --bdpmProcessGroup OBJECT-GROUP -- OBJECTS { -- bdpmProcessPID, -- bdpmProcessName, -- bdpmProcessuSecs, -- bdpmProcessTimeCreated -- } -- STATUS deprecated -- DESCRIPTION -- "A collection of objects providing common process -- monitoring information. This group is mandatory for -- all cisco devices. This object is deprecated -- by bdpmProcessGroupRev." -- ::= { bdpmGroups 2 } -- --bdpmProcessExtGroup OBJECT-GROUP -- OBJECTS { -- bdpmProcExtMemAllocated, -- bdpmProcExtMemFreed, -- bdpmProcExtInvoked, -- bdpmProcExtRuntime, -- bdpmProcExtUtil5Sec, -- bdpmProcExtUtil1Min, -- bdpmProcExtUtil5Min, -- bdpmProcExtPriority -- } -- STATUS deprecated -- DESCRIPTION -- "A collection of objects providing additional and -- more detailed process monitoring information. This -- group is mandatory for all cisco devices that have -- the internal capability to keep this information. -- This group is deprecated and new group -- bdpmProcessExtGroupRev is added." -- ::= { bdpmGroups 3 } -- --bdpmCPUTotalGroupRev OBJECT-GROUP -- OBJECTS { -- bdpmCPUTotalPhysicalIndex, -- bdpmCPUTotal5secRev, -- bdpmCPUTotal1minRev, -- bdpmCPUTotal5minRev -- } -- STATUS current -- DESCRIPTION -- "A collection of objects providing CPU load monitoring -- information. This group is mandatory for all cisco -- devices. This group deprecates bdpmCPUTotalGroup." -- ::= { bdpmGroups 4 } -- --bdpmProcessExtGroupRev OBJECT-GROUP -- OBJECTS { -- bdpmProcExtMemAllocatedRev, -- bdpmProcExtMemFreedRev, -- bdpmProcExtInvokedRev, -- bdpmProcExtRuntimeRev, -- bdpmProcExtUtil5SecRev, -- bdpmProcExtUtil1MinRev, -- bdpmProcExtUtil5MinRev, -- bdpmProcExtPriorityRev -- } -- STATUS current -- DESCRIPTION -- "A collection of objects providing additional and -- more detailed process monitoring information. This -- group is mandatory for all cisco devices that have -- the internal capability to keep this information. -- This group is formed after deprecating bdpmProcessExtGroup. -- bdpmProcExtMemAllocatedRev, bdpmProcExtMemFreedRev, -- bdpmProcExtInvokedRev, bdpmProcExtRuntimeRev, -- bdpmProcExtUtil5SecRev, bdpmProcExtUtil1MinRev and -- bdpmProcExtUtil5MinRev are the new objects added." -- ::= { bdpmGroups 5 } -- --bdpmProcessGroupRev OBJECT-GROUP -- OBJECTS { -- bdpmProcessPID, -- bdpmProcessName, -- bdpmProcessAverageUSecs, -- bdpmProcessTimeCreated -- } -- STATUS current -- DESCRIPTION -- "A collection of objects providing common process -- monitoring information. This group is mandatory for -- all cisco devices. This object deprecates -- bdpmProcessGroup." -- ::= { bdpmGroups 6 } END