-- ***************************************************************** -- NMS-EPON-OLT-PON.MIB: NMS OLT-COMM MIB file -- AUG 2009 -- ***************************************************************** -- NMS-EPON-OLT-PON DEFINITIONS ::= BEGIN IMPORTS Counter, IpAddress, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString, PhysAddress,ifDescr FROM RFC1213-MIB nmsEPONGroup FROM NMS-SMI opIfTxPowerCurr,opIfTemperature,opIfVolt,opIfCurrent FROM NMS-OPTICAL-PORT-MIB RowStatus FROM SNMPv2-TC; nmsEponOltPon OBJECT IDENTIFIER ::= { nmsEPONGroup 6 } nmseponoltponTable OBJECT-TYPE SYNTAX SEQUENCE OF NMSEponOltPonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of epon olt pon property table entries." ::= { nmsEponOltPon 1 } nmsEponOltPonEntry OBJECT-TYPE SYNTAX NMSEponOltPonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of additional objects in the epon olt pon property table." INDEX { ponIfIndex } ::= { nmseponoltponTable 1 } NMSEponOltPonEntry ::= SEQUENCE { ponIfIndex INTEGER, llidSequenceNo INTEGER, onuAuthMethod INTEGER, isCheckOnuMac INTEGER, isPONBelongtoPSG INTEGER, pONBelongtoPSGID INTEGER, isUsingMpcpRegisteAckDelayTime INTEGER, mpcpRegisteAckDelayTime INTEGER, ponIfAdminStatus INTEGER, ponIfInFecStatus INTEGER, ponIfOutFecStatus INTEGER, ponIfLaserStatus INTEGER, isOnuDataSwitch INTEGER, ponIfProtectedStatus INTEGER, ponIfDynamicMacLearningStatus INTEGER, ponIfMacACL DisplayString, ponIfIpACL DisplayString, fiberProtectHandInHand INTEGER, FiberProtectGroup INTEGER, splittingRatio INTEGER, activeOnuNum INTEGER, inactiveOnuNum INTEGER, llidIfindexString OCTET STRING } -- The following section describes the components of the -- table. ponIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The only diid of PON port in System." ::= { nmsEponOltPonEntry 1 } llidSequenceNo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Currnet LLID seqence number." ::= { nmsEponOltPonEntry 2 } onuAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), manual(1), mac(3), loid(4), hybrid(6) } ACCESS read-write STATUS mandatory DESCRIPTION "ONU authentication method." ::= { nmsEponOltPonEntry 3 } isCheckOnuMac OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Check ONU MAC when registering." ::= { nmsEponOltPonEntry 4 } isPONBelongtoPSG OBJECT-TYPE SYNTAX INTEGER { alone-pon(0), b-psg(1), active-pon(2), standby-pon(3), c-psg(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Check if PON belongs to PSG." ::= { nmsEponOltPonEntry 5 } pONBelongtoPSGID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PSG ID that PON belongs to." ::= { nmsEponOltPonEntry 6 } isUsingMpcpRegisteAckDelayTime OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If using MPCP registe Ack delay time." ::= { nmsEponOltPonEntry 7 } mpcpRegisteAckDelayTime OBJECT-TYPE SYNTAX INTEGER(1..50) ACCESS read-write STATUS mandatory DESCRIPTION "MPCP registe Ack delay time,range is 1-50ms." ::= { nmsEponOltPonEntry 8 } ponIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PON interface Administration Status." ::= { nmsEponOltPonEntry 9 } ponIfInFecStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PON interface in FEC Status." ::= { nmsEponOltPonEntry 10 } ponIfOutFecStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PON interface out FEC Status." ::= { nmsEponOltPonEntry 11 } ponIfLaserStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PON interface Laser Status." ::= { nmsEponOltPonEntry 12 } isOnuDataSwitch OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PON interface data exchange Status with ONU." ::= { nmsEponOltPonEntry 13 } ponIfProtectedStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PON interface protected Status." ::= { nmsEponOltPonEntry 14 } ponIfDynamicMacLearningStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PON interface dynamic MAC address learning Status." ::= { nmsEponOltPonEntry 15 } ponIfMacACL OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "PON interface MAC address ACL." ::= { nmsEponOltPonEntry 16 } ponIfIpACL OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "PON interface IP address ACL." ::= { nmsEponOltPonEntry 17 } fiberProtectHandInHand OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Fiber protect hand in hand. 1-enable,2-disable. Default is disable." ::= { nmsEponOltPonEntry 18 } fiberProtectGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Fiber protect group. The range of groupID is 0-32. 0 means disable. Default is disable." ::= { nmsEponOltPonEntry 19 } splittingRatio OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fiber splits ratio, for each OLT PON port, which means the max number of ONU." ::= { nmsEponOltPonEntry 20 } activeOnuNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Currnet active ONU number." ::= { nmsEponOltPonEntry 21 } inactiveOnuNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Currnet inactive ONU number." ::= { nmsEponOltPonEntry 22 } llidIfindexString OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Llid ports ifindex string. Seperated with comma." ::= { nmsEponOltPonEntry 23 } ponOpticsParameterAlarmSetTable OBJECT-TYPE SYNTAX SEQUENCE OF PonOpticsParameterAlarmSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of epon olt pon optics Parameter Alarm set table entries." ::= { nmsEponOltPon 2 } ponOpticsParameterAlarmSetEntry OBJECT-TYPE SYNTAX PonOpticsParameterAlarmSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of additional objects in the epon olt pon optics Parameter Alarm set table." INDEX { ifIndex } ::= { ponOpticsParameterAlarmSetTable 1 } PonOpticsParameterAlarmSetEntry ::= SEQUENCE { ifIndex INTEGER, txPowerAlarmUpLimitEnable INTEGER, txPowerAlarmUpLimitThreshold INTEGER, txPowerAlarmUpLimitClearThreshold INTEGER, txPowerAlarmLowLimitEnable INTEGER, txPowerAlarmLowLimitThreshold INTEGER, txPowerAlarmLowLimitClearThreshold INTEGER, temperatureAlarmUpLimitEnable INTEGER, temperatureAlarmUpLimitThreshold INTEGER, temperatureAlarmUpLimitClearThreshold INTEGER, temperatureAlarmLowLimitEnable INTEGER, temperatureAlarmLowLimitThreshold INTEGER, temperatureAlarmLowLimitClearThreshold INTEGER, voltageAlarmUpLimitEnable INTEGER, voltageAlarmUpLimitThreshold INTEGER, voltageAlarmUpLimitClearThreshold INTEGER, voltageAlarmLowLimitEnable INTEGER, voltageAlarmLowLimitThreshold INTEGER, voltageAlarmLowLimitClearThreshold INTEGER, currentAlarmUpLimitEnable INTEGER, currentAlarmUpLimitThreshold INTEGER, currentAlarmUpLimitClearThreshold INTEGER, currentAlarmLowLimitEnable INTEGER, currentAlarmLowLimitThreshold INTEGER, currentAlarmLowLimitClearThreshold INTEGER } ifIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The only diid of PON port in System." ::= { ponOpticsParameterAlarmSetEntry 1 } txPowerAlarmUpLimitEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable." ::= { ponOpticsParameterAlarmSetEntry 2 } txPowerAlarmUpLimitThreshold OBJECT-TYPE SYNTAX INTEGER(-400..82) ACCESS read-write STATUS mandatory DESCRIPTION "The upper threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is 82." ::= { ponOpticsParameterAlarmSetEntry 3 } txPowerAlarmUpLimitClearThreshold OBJECT-TYPE SYNTAX INTEGER(-400..82) ACCESS read-write STATUS mandatory DESCRIPTION "The upper threshold of tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is 82." ::= { ponOpticsParameterAlarmSetEntry 4 } txPowerAlarmLowLimitEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the alarm of PON low TX power. 1-enable, 2-disable. Default is disable." ::= { ponOpticsParameterAlarmSetEntry 5 } txPowerAlarmLowLimitThreshold OBJECT-TYPE SYNTAX INTEGER(-400..82) ACCESS read-write STATUS mandatory DESCRIPTION "The low threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is -400." ::= { ponOpticsParameterAlarmSetEntry 6 } txPowerAlarmLowLimitClearThreshold OBJECT-TYPE SYNTAX INTEGER(-400..82) ACCESS read-write STATUS mandatory DESCRIPTION "The low threshold tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is -400." ::= { ponOpticsParameterAlarmSetEntry 7 } temperatureAlarmUpLimitEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the alarm of PON high temperature. 1-enable, 2-disable. Default is disable." ::= { ponOpticsParameterAlarmSetEntry 8 } temperatureAlarmUpLimitThreshold OBJECT-TYPE SYNTAX INTEGER(-1280..1280) ACCESS read-write STATUS mandatory DESCRIPTION "The upper threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is 1280." ::= { ponOpticsParameterAlarmSetEntry 9 } temperatureAlarmUpLimitClearThreshold OBJECT-TYPE SYNTAX INTEGER(-1280..1280) ACCESS read-write STATUS mandatory DESCRIPTION "The upper threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is 1280." ::= { ponOpticsParameterAlarmSetEntry 10 } temperatureAlarmLowLimitEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the alarm of PON low temperature. 1-enable, 2-disable. Default is disable." ::= { ponOpticsParameterAlarmSetEntry 11 } temperatureAlarmLowLimitThreshold OBJECT-TYPE SYNTAX INTEGER(-1280..1280) ACCESS read-write STATUS mandatory DESCRIPTION "The low threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is -1280." ::= { ponOpticsParameterAlarmSetEntry 12 } temperatureAlarmLowLimitClearThreshold OBJECT-TYPE SYNTAX INTEGER(-1280..1280) ACCESS read-write STATUS mandatory DESCRIPTION "The low threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is -1280." ::= { ponOpticsParameterAlarmSetEntry 13 } voltageAlarmUpLimitEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the alarm of PON high voltage. 1-enable, 2-disable. Default is disable." ::= { ponOpticsParameterAlarmSetEntry 14 } voltageAlarmUpLimitThreshold OBJECT-TYPE SYNTAX INTEGER(0..65) ACCESS read-write STATUS mandatory DESCRIPTION "The upper threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 65." ::= { ponOpticsParameterAlarmSetEntry 15 } voltageAlarmUpLimitClearThreshold OBJECT-TYPE SYNTAX INTEGER(0..65) ACCESS read-write STATUS mandatory DESCRIPTION "The upper threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 65." ::= { ponOpticsParameterAlarmSetEntry 16 } voltageAlarmLowLimitEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the alarm of PON low voltage. 1-enable, 2-disable. Default is disable." ::= { ponOpticsParameterAlarmSetEntry 17 } voltageAlarmLowLimitThreshold OBJECT-TYPE SYNTAX INTEGER(0..65) ACCESS read-write STATUS mandatory DESCRIPTION "The low threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 0." ::= { ponOpticsParameterAlarmSetEntry 18 } voltageAlarmLowLimitClearThreshold OBJECT-TYPE SYNTAX INTEGER(0..65) ACCESS read-write STATUS mandatory DESCRIPTION "The low threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 0." ::= { ponOpticsParameterAlarmSetEntry 19 } currentAlarmUpLimitEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the alarm of PON high current. 1-enable, 2-disable. Default is disable." ::= { ponOpticsParameterAlarmSetEntry 20 } currentAlarmUpLimitThreshold OBJECT-TYPE SYNTAX INTEGER(0..1310) ACCESS read-write STATUS mandatory DESCRIPTION "The upper threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 1310." ::= { ponOpticsParameterAlarmSetEntry 21 } currentAlarmUpLimitClearThreshold OBJECT-TYPE SYNTAX INTEGER(0..1310) ACCESS read-write STATUS mandatory DESCRIPTION "The upper threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 1310." ::= { ponOpticsParameterAlarmSetEntry 22 } currentAlarmLowLimitEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable." ::= { ponOpticsParameterAlarmSetEntry 23 } currentAlarmLowLimitThreshold OBJECT-TYPE SYNTAX INTEGER(0..1310) ACCESS read-write STATUS mandatory DESCRIPTION "The low threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 0." ::= { ponOpticsParameterAlarmSetEntry 24 } currentAlarmLowLimitClearThreshold OBJECT-TYPE SYNTAX INTEGER(0..1310) ACCESS read-write STATUS mandatory DESCRIPTION "The low threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 0." ::= { ponOpticsParameterAlarmSetEntry 25 } -- Notifications ponSfpParameterAlarmsNotifications OBJECT IDENTIFIER ::= { nmsEponOltPon 3 } alarmStatus OBJECT-TYPE SYNTAX INTEGER{ above(1), below(2), normal(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Alarm status definition. 1-above, 2-below, 3-normal." ::= { ponSfpParameterAlarmsNotifications 1 } ponSfpParameterAlarmsNotification NOTIFICATION-TYPE OBJECTS { ponIfIndex, ifDescr, alarmStatus, opIfTxPowerCurr, opIfTemperature, opIfVolt, opIfCurrent } STATUS current DESCRIPTION "The agent generates this trap when olt optical module works in abnormal status or return to normal ." ::= { ponSfpParameterAlarmsNotifications 2 } -- PON port migration ponPortMigration OBJECT IDENTIFIER ::= { nmsEponOltPon 4 } ponPortMigLlidSet OBJECT-TYPE SYNTAX OCTET STRING ACCESS write-only STATUS mandatory DESCRIPTION "Llid ports ifindex string. Seperated with semicolon. For example, if we migrate the PON port configuration from port EPON3/1(llid:25) to port EPON3/2(llid:26), this value should be set to '25;26'." ::= { ponPortMigration 1 } END