-- This file is corresponding to Release 10.2.3.100 from 2018/07/18 00:00:00


-- (C)opyright 1991-2014 bintec elmeg GmbH, All Rights Reserved
-- $RCSfile: mib-resource,v $ 
-- $Revision: 1.6 $ 
 
BIANCA-BRICK-MIBRES-MIB DEFINITIONS ::= BEGIN
 
        IMPORTS
            Counter, enterprises
                FROM RFC1155-SMI

            Unsigned32
		FROM SNMPv2-SMI

            DisplayString
                FROM RFC1158-MIB
 
            OBJECT-TYPE
                FROM RFC-1212

	    resource
		FROM BINTEC-MIB;

resourceMIB MODULE-IDENTITY
    LAST-UPDATED "201204120000Z"
    ORGANIZATION "bintec elmeg GmbH"
    CONTACT-INFO
            "EMail:   info@bintec-elmeg.com
             Web:     www.bintec-elmeg.com
            "
    DESCRIPTION
            "The MIB module for resource administration entities.
            "
    ::= { resource 255 }

-- System Resources

	cpuTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF CpuEntry
	    MAX-ACCESS  not-accessible
  	    STATUS  current

            DESCRIPTION
                "The CpuTable contains information about
		 the processor statistics in the system."
      	::= { resource 1 }
	
	cpuEntry OBJECT-TYPE
	    SYNTAX  CpuEntry
	    MAX-ACCESS  not-accessible
  	    STATUS  current

            DESCRIPTION
                ""
	    INDEX { cpuNumber }
      	::= { cpuTable 1 }
	
	CpuEntry ::=
	    SEQUENCE {
	        cpuNumber          INTEGER,
		cpuDescr           DisplayString,
		cpuTotalUser       INTEGER,
		cpuTotalSystem     INTEGER,
		cpuTotalStreams    INTEGER,
		cpuTotalIdle       INTEGER,
		cpuLoadUser        INTEGER,
		cpuLoadSystem      INTEGER,
		cpuLoadStreams     INTEGER,
		cpuLoadIdle        INTEGER,
		cpuLoadUser10s     INTEGER,
		cpuLoadSystem10s   INTEGER,
		cpuLoadStreams10s  INTEGER,
		cpuLoadIdle10s     INTEGER,
		cpuLoadUser60s     INTEGER,
		cpuLoadSystem60s   INTEGER,
		cpuLoadStreams60s  INTEGER,
		cpuLoadIdle60s     INTEGER
            }

        cpuNumber OBJECT-TYPE
	    SYNTAX  INTEGER
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"CPU Number."
      	::= { cpuEntry 1 }
	
        cpuDescr OBJECT-TYPE
	    SYNTAX  DisplayString
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Description of CPU."
      	::= { cpuEntry 2 }

        cpuTotalUser OBJECT-TYPE
	    SYNTAX  INTEGER
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Total time in seconds spent in user mode since booting."
      	::= { cpuEntry 3 }

        cpuTotalSystem OBJECT-TYPE
	    SYNTAX  INTEGER
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Total time in seconds spent in sytem mode since booting."
      	::= { cpuEntry 4 }

        cpuTotalStreams OBJECT-TYPE
	    SYNTAX  INTEGER
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Total time in seconds spent with streams processing since booting."
      	::= { cpuEntry 5 }

        cpuTotalIdle OBJECT-TYPE
	    SYNTAX  INTEGER
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Total idle time in seconds since booting."
      	::= { cpuEntry 6 }

        cpuLoadUser OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of time spent in user mode for the last second."
      	::= { cpuEntry 7 }

        cpuLoadSystem OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of time spent in system mode for the last second."		
      	::= { cpuEntry 8 }
	
        cpuLoadStreams OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of time spent with streams processing for the last second."
      	::= { cpuEntry 9 }
	
        cpuLoadIdle OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of idle time for the last second."
      	::= { cpuEntry 10 }

        cpuLoadUser10s OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of time spent in user mode for the last 10 seconds."
      	::= { cpuEntry 11 }

        cpuLoadSystem10s OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of time spent in system mode for the last 10 seconds."
      	::= { cpuEntry 12 }
	
        cpuLoadStreams10s OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of time spent with streams processing for the last 10 seconds."
      	::= { cpuEntry 13 }
	
        cpuLoadIdle10s OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of idle time measured for the last 10 seconds."
      	::= { cpuEntry 14 }
	
        cpuLoadUser60s OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of time spent in user mode for the last 60 seconds."
      	::= { cpuEntry 15 }

        cpuLoadSystem60s OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of time spent in system mode for the last 60 seconds."
      	::= { cpuEntry 16 }
	
        cpuLoadStreams60s OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of time spent with streams processing for the last 60 seconds."
      	::= { cpuEntry 17 }
	
        cpuLoadIdle60s OBJECT-TYPE
	    SYNTAX  INTEGER (0..100)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Percentage of idle time measured for the last 60 seconds."
      	::= { cpuEntry 18 }
	
	memoryTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF MemoryEntry
	    MAX-ACCESS  not-accessible
  	    STATUS  current

            DESCRIPTION
                "The memoryTable contains information about
		 the different memory in the system."
      	::= { resource 2 }
	
	memoryEntry OBJECT-TYPE
	    SYNTAX  MemoryEntry
	    MAX-ACCESS  not-accessible
  	    STATUS  current

            DESCRIPTION
                ""
	    INDEX { memoryType }
      	::= { memoryTable 1 }
	
	MemoryEntry ::=
	    SEQUENCE {
	        memoryType            INTEGER,
		memoryDescr           DisplayString,
		memoryBlockSize       INTEGER,
		memoryTotal           INTEGER,
		memoryInuse           INTEGER,
		memoryDramUse         INTEGER,
		memoryNAllocs         INTEGER,
		memoryNFrees          INTEGER,
		memoryNFails          INTEGER
            }

	memoryType OBJECT-TYPE
	    SYNTAX  INTEGER { flash(1), dram(2), dpool(3) }
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Type of memory:
		    flash (1) : Non volatile memory
		    dram  (2) : Dynamic memory
		    dpool (3) : Dynamic pool
		  "
      	::= { memoryEntry 1 }

	memoryDescr OBJECT-TYPE
	    SYNTAX  DisplayString
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Description of memory."
      	::= { memoryEntry 2 }

	memoryBlockSize OBJECT-TYPE
	    SYNTAX  Unsigned32
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Allocation size for memories from dpools."
      	::= { memoryEntry 3 }

	memoryTotal OBJECT-TYPE
	    SYNTAX  Unsigned32
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Amount of available units of this memory type measured in
                 units for dpools and bytes for flash/dram."
      	::= { memoryEntry 4 }

	memoryInuse OBJECT-TYPE
	    SYNTAX  Unsigned32
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
                "Used units of this memory type measured in units for dpools
		 and bytes for flash/dram."
      	::= { memoryEntry 5 }

	memoryDramUse OBJECT-TYPE
	    SYNTAX  Unsigned32
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
                "dpools might take memory from dram. This variable gives the
		 amount in bytes taken from a dram memory."
      	::= { memoryEntry 6 }

	memoryNAllocs OBJECT-TYPE
	    SYNTAX  Unsigned32
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
                "Number of memory allocations."
      	::= { memoryEntry 7 }

	memoryNFrees OBJECT-TYPE
	    SYNTAX  Unsigned32
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
                "Number of memory free operations."
      	::= { memoryEntry 8 }

	memoryNFails OBJECT-TYPE
	    SYNTAX  Unsigned32
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
                "Number of failed memory operations."
      	::= { memoryEntry 9 } 

	dspTable OBJECT-TYPE
	    SYNTAX  SEQUENCE OF DspEntry
	    MAX-ACCESS  not-accessible
  	    STATUS  current

            DESCRIPTION
                "The DspTable contains information about
		 Digital Signal processors in the system."
      	::= { resource 3 }
	
	dspEntry OBJECT-TYPE
	    SYNTAX  DspEntry
	    MAX-ACCESS  not-accessible
  	    STATUS  current

            DESCRIPTION
                ""
	    INDEX { dspSlot, dspUnit }
      	::= { dspTable 1 }
	
	DspEntry ::=
	    SEQUENCE {
	        dspSlot            INTEGER,
	        dspUnit            INTEGER,
		dspDescr           DisplayString,
		dspCapabilities    BITS,
		dspTotalChannels   INTEGER,
		dspUsedChannels    INTEGER
            }

        dspSlot OBJECT-TYPE
	    SYNTAX  INTEGER (0..512)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"DSP Slot Number."
      	::= { dspEntry 1 }

        dspUnit OBJECT-TYPE
	    SYNTAX  INTEGER (0..9999)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"DSP Unit Number."
      	::= { dspEntry 2 }

        dspDescr OBJECT-TYPE
	    SYNTAX  DisplayString
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
		"Description of DSP."
      	::= { dspEntry 3 }

	dspCapabilities OBJECT-TYPE
	    SYNTAX  BITS {
	    	    g711(0),
	    	    g722(1),
	    	    g723(2),
	    	    g728(3),
	    	    g726(4),
	    	    g729(5),
	    	    ilbc(6),
	    	    clear(7),
		    t30(8),
		    t38(9),
		    dtmf(10)
            }
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"This bitfield describes what the DSP supports."
	::= { dspEntry 4 }

	dspTotalChannels OBJECT-TYPE
	    SYNTAX  INTEGER (1..1000)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
                "Total number of channels of this DSP."
      	::= { dspEntry 5 } 

	dspUsedChannels OBJECT-TYPE
	    SYNTAX  INTEGER (1..1000)
	    MAX-ACCESS  read-only
  	    STATUS  current

            DESCRIPTION
                "Number of used channels of this DSP."
      	::= { dspEntry 6 } 

END