-- Copyright 2017 BlueCat Networks. All rights reserved. -- ***************************************************************** -- BCN-DHCPV4-MIB.mib: BlueCat Networks DHCPv4 services -- -- -- December 2010, Fabian Ischia -- -- All rights reserved. -- -- ***************************************************************** BCN-DHCPV4-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32, IpAddress FROM SNMPv2-SMI DisplayString, MacAddress FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF BcnAlarmSeverity FROM BCN-TC-MIB bcnServices FROM BCN-SMI-MIB; bcnDhcpv4MIB MODULE-IDENTITY LAST-UPDATED "201012080000Z" ORGANIZATION "BlueCat Networks" CONTACT-INFO "BlueCat Networks. Customer Care. North America Call: +1.866.491.2228 Europe Call: +44.8081.011.306 Other Call: +1.416.646.8433 Email: support@bluecatnetworks.com" DESCRIPTION "This module provides status as well as statistical information about the DHCPv4 service." REVISION "201012080000Z" DESCRIPTION "Initial version of this MIB module." ::= { bcnDhcpv4 1 } bcnDhcpv4 OBJECT IDENTIFIER ::= { bcnServices 1 } -- Organization bcnDhcpv4Objects OBJECT IDENTIFIER ::= { bcnDhcpv4 2 } bcnDhcpv4Notification OBJECT IDENTIFIER ::= { bcnDhcpv4 3 } bcnDhcpv4Conformance OBJECT IDENTIFIER ::= { bcnDhcpv4 4 } -- Data objects bcnDhcpv4ServiceStatus OBJECT-IDENTITY STATUS current DESCRIPTION "General state of the DHCPv4 Service." ::= { bcnDhcpv4Objects 1 } bcnDhcpv4SerOperState OBJECT-TYPE SYNTAX INTEGER { running(1), notRunning(2), starting(3), stopping(4), fault(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational state of the Service. The possible states are: running(1) The service is running normally. notRunning(2) The service is stopped either intentionally (i.e.: the service is not supposed to run on this node) or unintentionally (a problem has occurred). starting(3) The service is in the process of starting, either for the first time of after an event occurred. stopping(4) The service is in the process of stopping. Stopping a service might be necessary after a configuration change. fault(5) An error has been detected and the state is undefined. " ::= { bcnDhcpv4ServiceStatus 1 } bcnDhcpv4FirstAlertIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address identifying either subnet or pool for which the available IPs have been exhausted." ::= { bcnDhcpv4ServiceStatus 2 } bcnDhcpv4LeaseStatsSuccess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful DHCPv4 leases issued per second." ::= { bcnDhcpv4ServiceStatus 3 } -- DHCP server statistics bcnDhcpv4ServiceStatistics OBJECT-IDENTITY STATUS current DESCRIPTION "General state of the DHCPv4 Service." ::= { bcnDhcpv4Objects 2 } -- DHCP lease table bcnDhcpv4LeaseTable OBJECT-TYPE SYNTAX SEQUENCE OF BcnDhcpv4LeaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current lease table." ::= { bcnDhcpv4ServiceStatistics 1 } bcnDhcpv4LeaseEntry OBJECT-TYPE SYNTAX BcnDhcpv4LeaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A logical row in the bcnDhcpv4LeaseTable." INDEX { bcnDhcpv4LeaseIP } ::= { bcnDhcpv4LeaseTable 1 } BcnDhcpv4LeaseEntry ::= SEQUENCE { bcnDhcpv4LeaseIP IpAddress, bcnDhcpv4LeaseStartTime Unsigned32, bcnDhcpv4LeaseEndTime Unsigned32, bcnDhcpv4LeaseTimeStamp Unsigned32, bcnDhcpv4LeaseMacAddress MacAddress, bcnDhcpv4LeaseHostname DisplayString } bcnDhcpv4LeaseIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of the lease." ::= { bcnDhcpv4LeaseEntry 1 } bcnDhcpv4LeaseStartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the lease." ::= { bcnDhcpv4LeaseEntry 2 } bcnDhcpv4LeaseEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "End time of the lease." ::= { bcnDhcpv4LeaseEntry 3 } bcnDhcpv4LeaseTimeStamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "When failover protocol is being used the timestamp will indicate the time the peer has either been told the lease expires, or the expiry time that the peer has acknowledged." ::= { bcnDhcpv4LeaseEntry 4 } bcnDhcpv4LeaseMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware address (MAC address) of this lease." ::= { bcnDhcpv4LeaseEntry 5 } bcnDhcpv4LeaseHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The client hostname of the lease." ::= { bcnDhcpv4LeaseEntry 6 } -- DHCP Subnet table bcnDhcpv4SubnetTable OBJECT-TYPE SYNTAX SEQUENCE OF BcnDhcpv4SubnetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current subnet table." ::= { bcnDhcpv4ServiceStatistics 2 } bcnDhcpv4SubnetEntry OBJECT-TYPE SYNTAX BcnDhcpv4SubnetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A logical row in the bcnDhcpv4SubnetTable." INDEX { bcnDhcpv4SubnetIP } ::= { bcnDhcpv4SubnetTable 1 } BcnDhcpv4SubnetEntry ::= SEQUENCE { bcnDhcpv4SubnetIP IpAddress, bcnDhcpv4SubnetMask IpAddress, bcnDhcpv4SubnetSize Unsigned32, bcnDhcpv4SubnetFreeAddresses Unsigned32, bcnDhcpv4SubnetLowThreshold Unsigned32, bcnDhcpv4SubnetHighThreshold Unsigned32 } bcnDhcpv4SubnetIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of the subnet." ::= { bcnDhcpv4SubnetEntry 1 } bcnDhcpv4SubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP mask of the subnet." ::= { bcnDhcpv4SubnetEntry 2 } bcnDhcpv4SubnetSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of the subnet. The size of the subnet is calculated as the sum of the sizes of each pool defined within it. The pools are defined such that the fixed IPs are not contained within them." ::= { bcnDhcpv4SubnetEntry 3 } bcnDhcpv4SubnetFreeAddresses OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPs addresses available in this subnet." ::= { bcnDhcpv4SubnetEntry 4 } bcnDhcpv4SubnetLowThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low threshold for available free addresses in this subnet. If the value for available free addresses in this subnet becomes equal to or less than this value, a bcnDhcpv4SubnetLowNotif event is generated for this subnet. No more bcnDhcpv4SubnetLowNotif events will be generated for this subnet during this execution of the DHCPv4 server until the value for available free addresses has exceeded the value of bcnDhcpv4SubnetHighThreshold." ::= { bcnDhcpv4SubnetEntry 5 } bcnDhcpv4SubnetHighThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "High threshold for available free addresses in this subnet. If a bcnDhcpv4SubnetLowNotif event was generated and the value for available free addresses in this subnet has exceeded this value, a bcnDhcpv4SubnetHighNotif event is generated for this subnet. No more bcnDhcpv4SubnetHighNotif events will be generated for this subnet during this execution of the DHCPv4 server until another bcnDhcpv4SubnetLowNotif is generated." ::= { bcnDhcpv4SubnetEntry 6 } -- DHCP pool table bcnDhcpv4PoolTable OBJECT-TYPE SYNTAX SEQUENCE OF BcnDhcpv4PoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current pool table." ::= { bcnDhcpv4ServiceStatistics 3 } bcnDhcpv4PoolEntry OBJECT-TYPE SYNTAX BcnDhcpv4PoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A logical row in the bcnDhcpv4PoolTable." INDEX { bcnDhcpv4PoolStartIP } ::= { bcnDhcpv4PoolTable 1 } BcnDhcpv4PoolEntry ::= SEQUENCE { bcnDhcpv4PoolStartIP IpAddress, bcnDhcpv4PoolEndIP IpAddress, bcnDhcpv4PoolSubnetIP IpAddress, bcnDhcpv4PoolSize Unsigned32, bcnDhcpv4PoolFreeAddresses Unsigned32 } bcnDhcpv4PoolStartIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Start IP address of this pool." ::= { bcnDhcpv4PoolEntry 1 } bcnDhcpv4PoolEndIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "End IP address of this pool." ::= { bcnDhcpv4PoolEntry 2 } bcnDhcpv4PoolSubnetIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Subnet IP address of the pool." ::= { bcnDhcpv4PoolEntry 3 } bcnDhcpv4PoolSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of this pool." ::= { bcnDhcpv4PoolEntry 4 } bcnDhcpv4PoolFreeAddresses OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPs addresses available in this pool." ::= { bcnDhcpv4PoolEntry 5 } bcnDhcpv4FixedIPTable OBJECT-TYPE SYNTAX SEQUENCE OF BcnDhcpv4FixedIPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of fixed IP addresses for this DHCPv4 server." ::= { bcnDhcpv4ServiceStatistics 4 } -- DHCP Fixed IP address table bcnDhcpv4FixedIPEntry OBJECT-TYPE SYNTAX BcnDhcpv4FixedIPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A logical row in the bcnDhcpv4FixedIPTable." INDEX { bcnDhcpv4FixedIP } ::= { bcnDhcpv4FixedIPTable 1 } BcnDhcpv4FixedIPEntry ::= SEQUENCE { bcnDhcpv4FixedIP IpAddress } bcnDhcpv4FixedIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "One of the fixed IP addresses in the DHCPv4 configuration." ::= { bcnDhcpv4FixedIPEntry 1 } -- Notification definitions bcnDhcpv4NotificationEvents OBJECT IDENTIFIER ::= { bcnDhcpv4Notification 0 } bcnDhcpv4NotificationData OBJECT IDENTIFIER ::= { bcnDhcpv4Notification 1 } -- Notification data bcnDhcpv4AlarmSeverity OBJECT-TYPE SYNTAX BcnAlarmSeverity MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Severity classification for the alarm." ::= { bcnDhcpv4NotificationData 1 } bcnDhcpv4AlarmInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Descriptive information about the alarm event." ::= { bcnDhcpv4NotificationData 2 } bcnDhcpv4FailOverState OBJECT-TYPE SYNTAX INTEGER { startup (1), normal (2), communicationsInterrupted (3), partnerDown (4), potentialConflict (5), recover (6), paused (7), shutdown (8), recoverDone (9), recoverWait (254) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The state of DHCPv4 failover." ::= { bcnDhcpv4NotificationData 3 } bcnDhcpv4SubnetAlertIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IP address identifying a subnet for which the available IPs have been exhausted." ::= { bcnDhcpv4NotificationData 4 } -- Notification events bcnDhcpv4AlarmNotif NOTIFICATION-TYPE OBJECTS { bcnDhcpv4SerOperState, bcnDhcpv4AlarmSeverity, bcnDhcpv4AlarmInfo } STATUS current DESCRIPTION "A bcnDhcpv4AlarmNotif signifies that the DHCPv4 service has transitioned state or a particular event has been detected on the service." ::= { bcnDhcpv4NotificationEvents 1 } bcnDhcpv4FailOverNotif NOTIFICATION-TYPE OBJECTS { bcnDhcpv4FailOverState } STATUS current DESCRIPTION "A change of state has been detected on the DHCPv4 failover mechanism." ::= { bcnDhcpv4NotificationEvents 2 } bcnDhcpv4SubnetLowNotif NOTIFICATION-TYPE OBJECTS { bcnDhcpv4SubnetAlertIpAddr, bcnDhcpv4SubnetFreeAddresses, bcnDhcpv4SubnetLowThreshold } STATUS current DESCRIPTION "This notification signifies that the number of available IPv4 addresses for a particular subnet has fallen below the value of bcnDhcpv4SubnetLowThreshold for that subnet." ::= { bcnDhcpv4NotificationEvents 3 } bcnDhcpv4SubnetHighNotif NOTIFICATION-TYPE OBJECTS { bcnDhcpv4SubnetAlertIpAddr, bcnDhcpv4SubnetFreeAddresses, bcnDhcpv4SubnetHighThreshold } STATUS current DESCRIPTION "This notification signifies that the number of available IPv4 addresses for a particular subnet has risen above the value of bcnDhcpv4SubnetHighThreshold for that subnet." ::= { bcnDhcpv4NotificationEvents 4 } -- Conformance bcnDhcpv4ServiceCompliances OBJECT IDENTIFIER ::= { bcnDhcpv4Conformance 1 } bcnDhcpv4ServiceGroups OBJECT IDENTIFIER ::= { bcnDhcpv4Conformance 2 } bcnDhcpv4ServiceStatusGroup OBJECT-GROUP OBJECTS { bcnDhcpv4SerOperState, bcnDhcpv4FirstAlertIpAddr, bcnDhcpv4LeaseStatsSuccess } STATUS current DESCRIPTION "Status conformance." ::= { bcnDhcpv4ServiceGroups 1 } bcnDhcpv4StatisticsGroup OBJECT-GROUP OBJECTS { -- bcnDhcpv4LeaseIP, bcnDhcpv4LeaseStartTime, bcnDhcpv4LeaseEndTime, bcnDhcpv4LeaseTimeStamp, bcnDhcpv4LeaseMacAddress, bcnDhcpv4LeaseHostname, -- bcnDhcpv4SubnetIP, bcnDhcpv4SubnetMask, bcnDhcpv4SubnetSize, bcnDhcpv4SubnetFreeAddresses, bcnDhcpv4SubnetLowThreshold, bcnDhcpv4SubnetHighThreshold, bcnDhcpv4PoolSubnetIP, -- bcnDhcpv4PoolStartIP, bcnDhcpv4PoolEndIP, bcnDhcpv4PoolSize, bcnDhcpv4PoolFreeAddresses, bcnDhcpv4FixedIP } STATUS current DESCRIPTION "Server statistics conformance." ::= { bcnDhcpv4ServiceGroups 2 } bcnDhcpv4NotificationEventGroup NOTIFICATION-GROUP NOTIFICATIONS { bcnDhcpv4AlarmNotif, bcnDhcpv4FailOverNotif, bcnDhcpv4SubnetLowNotif, bcnDhcpv4SubnetHighNotif } STATUS current DESCRIPTION "Server statistics conformance." ::= { bcnDhcpv4ServiceGroups 3 } bcnDhcpv4NotificationDataGroup OBJECT-GROUP OBJECTS { bcnDhcpv4AlarmSeverity, bcnDhcpv4AlarmInfo, bcnDhcpv4FailOverState, bcnDhcpv4SubnetAlertIpAddr } STATUS current DESCRIPTION "Server statistics conformance." ::= { bcnDhcpv4ServiceGroups 4 } bcnDhcpv4StatusCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic conformance" MODULE -- This module MANDATORY-GROUPS { bcnDhcpv4ServiceStatusGroup, bcnDhcpv4StatisticsGroup, bcnDhcpv4NotificationEventGroup, bcnDhcpv4NotificationDataGroup } ::= {bcnDhcpv4ServiceCompliances 1 } END