BROCADE-NP-TM-STATS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64 FROM SNMPv2-SMI -- [RFC2578] InterfaceIndex FROM IF-MIB -- [RFC2863] InetAddress, InetAddressType, InetAddressPrefixLength FROM INET-ADDRESS-MIB -- [RFC4001] DisplayString FROM SNMPv2-TC -- [RFC2579] platform FROM FOUNDRY-SN-ROOT-MIB PortPriorityTC FROM FOUNDRY-SN-SWITCH-GROUP-MIB; brocadeNPTMStatsMIB MODULE-IDENTITY LAST-UPDATED "201109280000Z" -- September 28, 2011 ORGANIZATION "Brocade Communications Systems, Inc." CONTACT-INFO "Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com" DESCRIPTION "The MIB module to describe Network Processor (NP) and Traffic Manager(TM) related statistics information. Supported Platforms: - supported on NI XMR/MLX platforms. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." REVISION "201111180000Z" -- November 18, 2011 DESCRIPTION "Changes in this revision: - Updated below mib table descriptions with LAG interface support: brcdNPQosStatTable brcdTMDestUcastQStatTable " REVISION "201109280000Z" -- September 28, 2011 DESCRIPTION "Changes in this revision: - Added below new tables brcdNPQosStatTable brcdTMDestUcastQStatTable " REVISION "201009020000Z" -- September 02, 2010 DESCRIPTION "Initial revision" ::= { platform 2 } -- -- high level object identifiers -- brcdNPTMMIBObjects OBJECT IDENTIFIER ::= { brocadeNPTMStatsMIB 1 } brcdNPStatisticsInfo OBJECT IDENTIFIER ::= { brcdNPTMMIBObjects 1 } brcdTMStatisticsInfo OBJECT IDENTIFIER ::= { brcdNPTMMIBObjects 2 } -- the brcdNPStatsTable table -- The brcdNPStatsTable table contains information of NP related -- statistics on NI XMR/MLX platform. brcdNPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdNPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of brcdNPStats entries. This table contains information of various Network Processor(NP) counters supported by this system." ::= { brcdNPStatisticsInfo 1 } brcdNPStatsEntry OBJECT-TYPE SYNTAX BrcdNPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing NP counter information applicable for a particular interface if the module is physically present." INDEX { brcdNPStatsIfIndex } ::= { brcdNPStatsTable 1 } BrcdNPStatsEntry ::= SEQUENCE { brcdNPStatsIfIndex InterfaceIndex, brcdNPStatsRxRawGoodPkts Counter64, brcdNPStatsRxForwardPkts Counter64, brcdNPStatsRxDiscardPkts Counter64, brcdNPStatsRxMiscPkts Counter64, brcdNPStatsRxUnicastPkts Counter64, brcdNPStatsRxBroadcastPkts Counter64, brcdNPStatsRxMulticastPkts Counter64, brcdNPStatsRxSendToTMPkts Counter64, brcdNPStatsRxBadPkts Counter64, brcdNPStatsRxLookupUnavailable Counter64, brcdNPStatsRxACLDrop Counter64, brcdNPStatsRxPriority0And1Drop Counter64, brcdNPStatsRxPriority2And3Drop Counter64, brcdNPStatsRxPriority4And5Drop Counter64, brcdNPStatsRxPriority6And7Drop Counter64, brcdNPStatsRxSuppressRPFDrop Counter64, brcdNPStatsRxRPFDrop Counter64, brcdNPStatsRxIPv4Pkts Counter64, brcdNPStatsRxIPv6Pkts Counter64, brcdNPStatsRxRouteOnlyDrop Counter64, brcdNPStatsRxIPv6SuppressRPFDrop Counter64, brcdNPStatsRxIPv6RPFDropCount Counter64, brcdNPStatsRxIPv4Bytes Counter64, brcdNPStatsRxIPv6Bytes Counter64, brcdNPStatsRxPOSCtrlProtocolPkts Counter64, brcdNPStatsRxPOSLinkDrop Counter64, brcdNPStatsRxRoutedPktsDrop Counter64, brcdNPStatsTxSentToMACPkts Counter64, brcdNPStatsTxRawGoodPkts Counter64, brcdNPStatsTxSrcPortSupressDrop Counter64, brcdNPStatsTxBadPktsCnt Counter64, brcdNPStatsTxUnicastPkts Counter64, brcdNPStatsTxBroadcastPkts Counter64, brcdNPStatsTxMulticastPkts Counter64, brcdNPStatsTxReceiveFromTM Counter64, brcdNPStatsTxACLDrop Counter64, brcdNPStatsTxPFCMulticastDrop Counter64, brcdNPStatsTxPFCMTUExceedDrop Counter64, brcdNPStatsTxPFCQMAPErrorDrop Counter64, brcdNPStatsTxIPv4Pkts Counter64, brcdNPStatsTxIPv6Pkts Counter64, brcdNPStatsTxIPv4Bytes Counter64, brcdNPStatsTxIPv6Bytes Counter64, brcdNPStatsTxPOSCtrlProtocolPkts Counter64, brcdNPStatsTxPOSLinkDrop Counter64 } brcdNPStatsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index as equivalent to ifIndex in MIB II. This is applicable only for the interfaces that are physically present and operationally up. " ::= { brcdNPStatsEntry 1 } brcdNPStatsRxRawGoodPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for good packets received from MAC. In equation, Rx Raw Good Packets = Rx Unicast Packets + Rx Multicast Packets + Rx Broadcast Packets = Rx IPv4 Packets + Rx IPv6 Packets + Rx Other Packets = Rx Forward Packets + Rx Discard Packets" ::= { brcdNPStatsEntry 2 } brcdNPStatsRxForwardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Counter for forwarded packets by packet evaluation engine in the Ingress. In equation, Rx Forward Packets = Rx Sent to TM Packets + Rx RL drop packets ." ::= { brcdNPStatsEntry 3 } brcdNPStatsRxDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets flagged for discard by packet evaluation engine. In equation, Rx Discard Packets = ACL drop + TTL drop + route-only drop + RPF drop + tag mismatch drop + VLAN blocking drop + segment filtering drop + drop by packet evaluation decisions + miscellaneous." ::= { brcdNPStatsEntry 4 } brcdNPStatsRxMiscPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for Miscellaneous Packets Received." ::= { brcdNPStatsEntry 5 } brcdNPStatsRxUnicastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for unicast packets received." ::= { brcdNPStatsEntry 6 } brcdNPStatsRxBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for broadcast packets received" ::= { brcdNPStatsEntry 7 } brcdNPStatsRxMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for multicast packets received." ::= { brcdNPStatsEntry 8 } brcdNPStatsRxSendToTMPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets sent to TM. This value should be equal to difference of Rx forward packets and RL drops." ::= { brcdNPStatsEntry 9 } brcdNPStatsRxBadPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for bad packets in the receiver side. They represent the packets that have MAC to NP interface errors." ::= { brcdNPStatsEntry 10 } brcdNPStatsRxLookupUnavailable OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that have been dropped due to unavailability of the CAM interface for packet lookups." ::= { brcdNPStatsEntry 11 } brcdNPStatsRxACLDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Drop counter for ACL drop on the ingress path." ::= { brcdNPStatsEntry 12 } brcdNPStatsRxPriority0And1Drop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets dropped based on Priority 0,1 in the Ingress." ::= { brcdNPStatsEntry 13 } brcdNPStatsRxPriority2And3Drop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets dropped based on Priority 2,3 in the Ingress." ::= { brcdNPStatsEntry 14 } brcdNPStatsRxPriority4And5Drop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets dropped based on Priority 4,5 in the Ingress." ::= { brcdNPStatsEntry 15 } brcdNPStatsRxPriority6And7Drop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets dropped based on Priority 6,7 in the Ingress." ::= { brcdNPStatsEntry 16 } brcdNPStatsRxSuppressRPFDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for suppressed RPF drops on the ingress path due to ACL override." ::= { brcdNPStatsEntry 17 } brcdNPStatsRxRPFDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for RPF drop in the ingress." ::= { brcdNPStatsEntry 18 } brcdNPStatsRxIPv4Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw packet count that have IPv4 Etype (0x0800) and IP version of 0x4." ::= { brcdNPStatsEntry 19 } brcdNPStatsRxIPv6Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw packet count that have IPv6 Etype (0x86DD) and IP version of 0x6." ::= { brcdNPStatsEntry 20 } brcdNPStatsRxRouteOnlyDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts packets that have been dropped due to Route-Only configuration during MAC-DA processing. " ::= { brcdNPStatsEntry 21 } brcdNPStatsRxIPv6SuppressRPFDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for IPv6 suppressed RFP drops on the ingress path due to ACL override." ::= { brcdNPStatsEntry 22 } brcdNPStatsRxIPv6RPFDropCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for IPv6 drop on the ingress." ::= { brcdNPStatsEntry 23 } brcdNPStatsRxIPv4Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw packet Bytes (+FCS) that have IPv4 Etype (0x0800) and IP version equals 0x4. " ::= { brcdNPStatsEntry 24 } brcdNPStatsRxIPv6Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw packet Bytes (+FCS) that have IPv6 Etype (0x86DD) and IP version equals 0x6. " ::= { brcdNPStatsEntry 25 } brcdNPStatsRxPOSCtrlProtocolPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of control protocol packets received in POS mode. The object is supported only on POS interfaces. 0 is returned for others." ::= { brcdNPStatsEntry 26 } brcdNPStatsRxPOSLinkDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped due to link state in POS mode. The object is supported only on POS interfaces. 0 is returned for others. " ::= { brcdNPStatsEntry 27 } brcdNPStatsRxRoutedPktsDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received IPv4 or IPv6 routed packets that are dropped because the TTL is 0, or because routing is not enabled on the given virtual interface. " ::= { brcdNPStatsEntry 28 } brcdNPStatsTxSentToMACPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets sent to MAC for transmit.In equation, Tx Sent to MAC = Tx IPv4 Packets + Tx IPv6 Packets + Tx Others = Tx Raw Good Packets - Tx Source Port Suppression Drop - Tx ACL drop - Tx RL Drop - Tx Multicast TTL drop." ::= { brcdNPStatsEntry 29 } brcdNPStatsTxRawGoodPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets sent to egress processing logic that pass the initial length checks (min, max, offsets, bad packet etc.)In equation, Tx Raw Good Packets = Tx Receive From TM Packets - Tx Bad Packets = Tx Unicast Packets + Tx Broadcast Packets + Tx Multicast Packets + Tx Source Port Suppression Drop. " ::= { brcdNPStatsEntry 30 } brcdNPStatsTxSrcPortSupressDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped because of transmit source port suppression." ::= { brcdNPStatsEntry 31 } brcdNPStatsTxBadPktsCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets dropped in egress logic that fail the initial length checks (min, max, bad packet etc.)." ::= { brcdNPStatsEntry 32 } brcdNPStatsTxUnicastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for unicast packets transmitted." ::= { brcdNPStatsEntry 33 } brcdNPStatsTxBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for broadcast packets transmitted." ::= { brcdNPStatsEntry 34 } brcdNPStatsTxMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for multicast packets transmitted." ::= { brcdNPStatsEntry 35 } brcdNPStatsTxReceiveFromTM OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for packets received from TM." ::= { brcdNPStatsEntry 36 } brcdNPStatsTxACLDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that have been dropped by the outbound ACL logic." ::= { brcdNPStatsEntry 37 } brcdNPStatsTxPFCMulticastDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of multicast FID packets that have been dropped by egress logic that map to the egress queue which is in paused state. Supported only on 'NI-MLX-10Gx8-D 8-port 10GbE Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module'. 0 is returned for the rest of the cards." ::= { brcdNPStatsEntry 38 } brcdNPStatsTxPFCMTUExceedDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that have been dropped by egress logic that exceeds the MTU of the egress queue (they map to). Supported only on 'NI-MLX-10Gx8-D 8-port 10GbE Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module'. 0 is returned for the rest of the cards." ::= { brcdNPStatsEntry 39 } brcdNPStatsTxPFCQMAPErrorDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that have been dropped by egress logic that does not map to any valid egress queue. This object is Supported only on 'NI-MLX-10Gx8-D 8-port 10GbE Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module'. 0 is returned for the rest of the cards." ::= { brcdNPStatsEntry 40 } brcdNPStatsTxIPv4Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPv4 packets transmitted out the port that have Etype 0x0800 and IPver version equals 0x4)" ::= { brcdNPStatsEntry 41 } brcdNPStatsTxIPv6Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPv6 packets transmitted out the port that have Etype 0x86DD and IPver version equals 0x6." ::= { brcdNPStatsEntry 42} brcdNPStatsTxIPv4Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts packet Bytes (+FCS) that have IPv4 Etype (0x0800) and IP version equals 0x4" ::= { brcdNPStatsEntry 43} brcdNPStatsTxIPv6Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts packet Bytes (+FCS) that have IPv6 Etype (0x86DD) and IP version equals 0x6" ::= { brcdNPStatsEntry 44} brcdNPStatsTxPOSCtrlProtocolPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of control protocol packets sent in POS mode. The object is supported only for POS interfaces. For others it returns 0." ::= { brcdNPStatsEntry 45 } brcdNPStatsTxPOSLinkDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped due to link state in POS mode. The object is supported only for POS interfaces. For others it returns 0." ::= { brcdNPStatsEntry 46 } -- The brcdNPQosStatTable table contains information of NP Qos related -- statistics on NI XMR/MLX platform. brcdNPQosStatTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdNPQosStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information of Qos counters for the specific interface per Qos priority. Please refer to the MIB reference guide for pre-requisites of this table." ::= { brcdNPStatisticsInfo 2 } brcdNPQosStatEntry OBJECT-TYPE SYNTAX BrcdNPQosStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing Qos statistics information applicable for a particular interface. " INDEX { brcdNPQosStatIfIndex, brcdNPQosStatQosPriority } ::= { brcdNPQosStatTable 1 } BrcdNPQosStatEntry ::= SEQUENCE { brcdNPQosStatIfIndex InterfaceIndex, brcdNPQosStatQosPriority PortPriorityTC, brcdNPQosStatIngressPkts Counter64, brcdNPQosStatIngressBytes Counter64, brcdNPQosStatEgressPkts Counter64, brcdNPQosStatEgressBytes Counter64 } brcdNPQosStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "ifIndex of the interface. All the interfaces of the LP modules that are physically present and operationally up will be included in this table. Starting from NetIron 5.3 release, all deployed LAG interfaces will also be included in this table." ::= { brcdNPQosStatEntry 1 } brcdNPQosStatQosPriority OBJECT-TYPE SYNTAX PortPriorityTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Qos priority associated with this entry. This is 1-based index. The priority0 maps to 1, priority1 maps to 2 etc. Priority value equal to nonPriority(128) is not applicable to this table." ::= { brcdNPQosStatEntry 2 } brcdNPQosStatIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that have arrived on the specified interface with a DSCP, EXP or PCP value equal to the value of the brcdNPQosStatQosPriority object." ::= { brcdNPQosStatEntry 3 } brcdNPQosStatIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes that have arrived on the specified interface with a DSCP, EXP or PCP value in the packet equal to the value of the brcdNPQosStatQosPriority object." ::= { brcdNPQosStatEntry 4 } brcdNPQosStatEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets leaving the device on the specified interface with an internal priority value equal to the value of the brcdNPQosStatQosPriority object. The internal priority is configuration dependent but generally is a function of DSCP, EXP or PCP." ::= { brcdNPQosStatEntry 5 } brcdNPQosStatEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes leaving the device on the specified interface with an internal priority value equal to the value of the brcdNPQosStatQosPriority object. The internal priority is configuration dependent but generally is a function of DSCP, EXP or PCP." ::= { brcdNPQosStatEntry 6 } -- the brcdTMStatsInfoGroup brcdTMStatisticsInfoGroup OBJECT IDENTIFIER ::= { brcdTMStatisticsInfo 1 } brcdTMPortMappingMaxPorts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum ports that can be supported by the TM on this system" ::= { brcdTMStatisticsInfoGroup 1 } brcdTMPortMappingUsedPorts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The currently used ports on this system" ::= { brcdTMStatisticsInfoGroup 2 } brcdTMPortMappingAvailablePorts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The available ports on this system" ::= { brcdTMStatisticsInfoGroup 3 } -- The brcdTMStatsTable table contains information of Traffic Manager(TM) -- related statistics on NI XMR/MLX platform. brcdTMStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of brcdTMStats entries. This table contains information of various Traffic Manager(TM) counters supported by this system." ::= { brcdTMStatisticsInfo 2 } brcdTMStatsEntry OBJECT-TYPE SYNTAX BrcdTMStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMStatsSlotId, brcdTMStatsTMDeviceId } ::= { brcdTMStatsTable 1 } BrcdTMStatsEntry ::= SEQUENCE { brcdTMStatsSlotId Unsigned32, brcdTMStatsTMDeviceId Unsigned32, brcdTMStatsDescription DisplayString, brcdTMStatsTotalIngressPktsCnt Counter64, brcdTMStatsIngressEnqueuePkts Counter64, brcdTMStatsEgressEnqueuePkts Counter64, brcdTMStatsIngressEnqueueBytes Counter64, brcdTMStatsEgressEnqueueBytes Counter64, brcdTMStatsIngressDequeuePkts Counter64, brcdTMStatsIngressDequeueBytes Counter64, brcdTMStatsIngressTotalQDiscardPkts Counter64, brcdTMStatsIngressTotalQDiscardBytes Counter64, brcdTMStatsIngressOldestDiscardPkts Counter64, brcdTMStatsIngressOldestDiscardBytes Counter64, brcdTMStatsEgressDiscardPkts Counter64, brcdTMStatsEgressDiscardBytes Counter64 } brcdTMStatsSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMStatsEntry 1 } brcdTMStatsTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in the system." ::= { brcdTMStatsEntry 2 } brcdTMStatsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdTMStatsTMDeviceId." ::= { brcdTMStatsEntry 3 } brcdTMStatsTotalIngressPktsCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering into this traffic manager." ::= { brcdTMStatsEntry 4 } brcdTMStatsIngressEnqueuePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager." ::= { brcdTMStatsEntry 5 } brcdTMStatsEgressEnqueuePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering egress queues and forwarded out on this traffic manager." ::= { brcdTMStatsEntry 6 } brcdTMStatsIngressEnqueueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module' cards. 0 is returned for these cards." ::= { brcdTMStatsEntry 7 } brcdTMStatsEgressEnqueueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering egress queues and forwarded out on this traffic manager. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module' cards. 0 is returned for these cards." ::= { brcdTMStatsEntry 8 } brcdTMStatsIngressDequeuePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic manager." ::= { brcdTMStatsEntry 9 } brcdTMStatsIngressDequeueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module' cards." ::= { brcdTMStatsEntry 10 } brcdTMStatsIngressTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: (1) the queue reaching its maximum depth, WRED, or other reasons. (2) the network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMStatsEntry 11 } brcdTMStatsIngressTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: (1) the queue reaching its maximum depth, WRED, or other reasons. (2) the network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module' cards." ::= { brcdTMStatsEntry 12 } brcdTMStatsIngressOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted later due to buffer being full." ::= { brcdTMStatsEntry 13 } brcdTMStatsIngressOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted later due to buffer being full. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module' cards. 0 is returned for these cards." ::= { brcdTMStatsEntry 14 } brcdTMStatsEgressDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " A count of all packets failing to enter egress queues on this traffic manager." ::= { brcdTMStatsEntry 15 } brcdTMStatsEgressDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " A count of all bytes failing to enter egress queues on this traffic manager. This counter is not supported on 'NI-MLX-10Gx8-D 8-port 10GbE (D) Module' and 'NI-MLX-10Gx8-M 8-port 10GbE (M) Module' cards. 0 is returned for these cards. " ::= { brcdTMStatsEntry 16 } -- The brcdTMUnicastQStatsTable table contains information of Traffic Manager -- (TM) Unicast queue related statistics on NI XMR/MLX platform. brcdTMUcastQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMUcastQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM unicast queue stats entries. This table contains information of Traffic Manager(TM) unicast queue counters supported by this system." ::= { brcdTMStatisticsInfo 3 } brcdTMUcastQStatsEntry OBJECT-TYPE SYNTAX BrcdTMUcastQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMUcastQStatsSlotId, brcdTMUcastQStatsTMDeviceId, brcdTMUcastQStatsDstIfIndex, brcdTMUcastQStatsPriority } ::= { brcdTMUcastQStatsTable 1 } BrcdTMUcastQStatsEntry ::= SEQUENCE { brcdTMUcastQStatsSlotId Unsigned32, brcdTMUcastQStatsTMDeviceId Unsigned32, brcdTMUcastQStatsDstIfIndex InterfaceIndex, brcdTMUcastQStatsPriority PortPriorityTC, brcdTMUcastQStatsDescription DisplayString, brcdTMUcastQStatsEnquePkts Counter64, brcdTMUcastQStatsEnqueBytes Counter64, brcdTMUcastQStatsDequePkts Counter64, brcdTMUcastQStatsDequeBytes Counter64, brcdTMUcastQStatsTotalQDiscardPkts Counter64, brcdTMUcastQStatsTotalQDiscardBytes Counter64, brcdTMUcastQStatsOldestDiscardPkts Counter64, brcdTMUcastQStatsOldestDiscardBytes Counter64, brcdTMUcastQStatsWREDDroppedPkts Counter64, brcdTMUcastQStatsWREDDroppedBytes Counter64, brcdTMUcastQStatsMaxQDepthSinceLastRead Counter64, brcdTMUcastQStatsQSize Unsigned32, brcdTMUcastQStatsCreditCount Unsigned32 } brcdTMUcastQStatsSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMUcastQStatsEntry 1 } brcdTMUcastQStatsTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in the system." ::= { brcdTMUcastQStatsEntry 2 } brcdTMUcastQStatsDstIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination interface index. This is applicable only for the interface on the LP module that is physically present and operationally up" ::= { brcdTMUcastQStatsEntry 3 } brcdTMUcastQStatsPriority OBJECT-TYPE SYNTAX PortPriorityTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. This is 1-based index. When the tm-max-queues is set to 4, two consecutive priorities are stored in one unicast queue. In this case, the valid values for this index are 1, 3, 5 and 7." ::= { brcdTMUcastQStatsEntry 4 } brcdTMUcastQStatsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdTMUcastQStatsTMDeviceId and priorities serviced by this queue." ::= { brcdTMUcastQStatsEntry 5 } brcdTMUcastQStatsEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager" ::= { brcdTMUcastQStatsEntry 6 } brcdTMUcastQStatsEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager" ::= { brcdTMUcastQStatsEntry 7 } brcdTMUcastQStatsDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic Manager" ::= { brcdTMUcastQStatsEntry 8 } brcdTMUcastQStatsDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager" ::= { brcdTMUcastQStatsEntry 9 } brcdTMUcastQStatsTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMUcastQStatsEntry 10 } brcdTMUcastQStatsTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering" ::= { brcdTMUcastQStatsEntry 11 } brcdTMUcastQStatsOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted afterwards due to buffer full." ::= { brcdTMUcastQStatsEntry 12 } brcdTMUcastQStatsOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted afterwards due to buffer full" ::= { brcdTMUcastQStatsEntry 13 } brcdTMUcastQStatsWREDDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMUcastQStatsEntry 14 } brcdTMUcastQStatsWREDDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMUcastQStatsEntry 15 } brcdTMUcastQStatsMaxQDepthSinceLastRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum queue depth since last access to read." ::= { brcdTMUcastQStatsEntry 16 } brcdTMUcastQStatsQSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current size" ::= { brcdTMUcastQStatsEntry 17 } brcdTMUcastQStatsCreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current credit count" ::= { brcdTMUcastQStatsEntry 18 } -- The brcdTMMcastQStatsTable table contains information of Traffic Manager -- (TM) Multicast queue related statistics on NI XMR/MLX platform. brcdTMMcastQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMMcastQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM Multicast queue stats entries. This table contains information of Traffic Manager(TM) Multicast queue counters supported by this system." ::= { brcdTMStatisticsInfo 4 } brcdTMMcastQStatsEntry OBJECT-TYPE SYNTAX BrcdTMMcastQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMMcastQStatsSlotId, brcdTMMcastQStatsTMDeviceId, brcdTMMcastQStatsPriority } ::= { brcdTMMcastQStatsTable 1 } BrcdTMMcastQStatsEntry ::= SEQUENCE { brcdTMMcastQStatsSlotId Unsigned32, brcdTMMcastQStatsTMDeviceId Unsigned32, brcdTMMcastQStatsPriority INTEGER, brcdTMMcastQStatsDescription DisplayString, brcdTMMcastQStatsEnquePkts Counter64, brcdTMMcastQStatsEnqueBytes Counter64, brcdTMMcastQStatsDequePkts Counter64, brcdTMMcastQStatsDequeBytes Counter64, brcdTMMcastQStatsTotalQDiscardPkts Counter64, brcdTMMcastQStatsTotalQDiscardBytes Counter64, brcdTMMcastQStatsOldestDiscardPkts Counter64, brcdTMMcastQStatsOldestDiscardBytes Counter64, brcdTMMcastQStatsWREDDroppedPkts Counter64, brcdTMMcastQStatsWREDDroppedBytes Counter64, brcdTMMcastQStatsMaxQDepthSinceLastRead Counter64, brcdTMMcastQStatsQSize Unsigned32, brcdTMMcastQStatsCreditCount Unsigned32 } brcdTMMcastQStatsSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMMcastQStatsEntry 1 } brcdTMMcastQStatsTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in this system." ::= { brcdTMMcastQStatsEntry 2 } brcdTMMcastQStatsPriority OBJECT-TYPE SYNTAX INTEGER { priority1And2 (1), -- Priority 1 and 2 priority3And4 (3), -- Priority 3 and 4 priority5And6 (5), -- Priority 5 and 6 priority7And8 (7) -- Priority 7 and 8 } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. Two consecutive priorities are stored in one multicast queue. There are 4 multicast queues per TM for 8 priorities." ::= { brcdTMMcastQStatsEntry 3 } brcdTMMcastQStatsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdTMMcastQStatsTMDeviceId and priorities serviced by this queue." ::= { brcdTMMcastQStatsEntry 4 } brcdTMMcastQStatsEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager" ::= { brcdTMMcastQStatsEntry 5 } brcdTMMcastQStatsEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager" ::= { brcdTMMcastQStatsEntry 6 } brcdTMMcastQStatsDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic Manager" ::= { brcdTMMcastQStatsEntry 7 } brcdTMMcastQStatsDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager" ::= { brcdTMMcastQStatsEntry 8 } brcdTMMcastQStatsTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMMcastQStatsEntry 9 } brcdTMMcastQStatsTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering" ::= { brcdTMMcastQStatsEntry 10 } brcdTMMcastQStatsOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted afterwards due to buffer full." ::= { brcdTMMcastQStatsEntry 11 } brcdTMMcastQStatsOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted afterwards due to buffer full" ::= { brcdTMMcastQStatsEntry 12 } brcdTMMcastQStatsWREDDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMMcastQStatsEntry 13 } brcdTMMcastQStatsWREDDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMMcastQStatsEntry 14 } brcdTMMcastQStatsMaxQDepthSinceLastRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum queue depth since last access to read." ::= { brcdTMMcastQStatsEntry 15 } brcdTMMcastQStatsQSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current size" ::= { brcdTMMcastQStatsEntry 16 } brcdTMMcastQStatsCreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current credit count" ::= { brcdTMMcastQStatsEntry 17 } -- The brcdTMCpuQStatsTable table contains information of Traffic Manager(TM) -- CPU queue related statistics on NI XMR/MLX platform. brcdTMCpuQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMCpuQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM CPU queue stats entries. This table contains information of Traffic Manager(TM) CPU queue counters supported by this system." ::= { brcdTMStatisticsInfo 5 } brcdTMCpuQStatsEntry OBJECT-TYPE SYNTAX BrcdTMCpuQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMCpuQStatsSlotId, brcdTMCpuQStatsTMDeviceId, brcdTMCpuQStatsType, brcdTMCpuQStatsPriority } ::= { brcdTMCpuQStatsTable 1 } BrcdTMCpuQStatsEntry ::= SEQUENCE { brcdTMCpuQStatsSlotId Unsigned32, brcdTMCpuQStatsTMDeviceId Unsigned32, brcdTMCpuQStatsType INTEGER, brcdTMCpuQStatsPriority PortPriorityTC, brcdTMCpuQStatsDescription DisplayString, brcdTMCpuQStatsEnquePkts Counter64, brcdTMCpuQStatsEnqueBytes Counter64, brcdTMCpuQStatsDequePkts Counter64, brcdTMCpuQStatsDequeBytes Counter64, brcdTMCpuQStatsTotalQDiscardPkts Counter64, brcdTMCpuQStatsTotalQDiscardBytes Counter64, brcdTMCpuQStatsOldestDiscardPkts Counter64, brcdTMCpuQStatsOldestDiscardBytes Counter64, brcdTMCpuQStatsWREDDroppedPkts Counter64, brcdTMCpuQStatsWREDDroppedBytes Counter64, brcdTMCpuQStatsMaxQDepthSinceLastRead Counter64, brcdTMCpuQStatsQSize Unsigned32, brcdTMCpuQStatsCreditCount Unsigned32 } brcdTMCpuQStatsSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMCpuQStatsEntry 1 } brcdTMCpuQStatsTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in the system." ::= { brcdTMCpuQStatsEntry 2 } brcdTMCpuQStatsType OBJECT-TYPE SYNTAX INTEGER { cpuQ (1), -- CPU Queue cpuCopyQ(2), -- CPU Copy Queue cpuManagementQ (3), -- CPU Management Queue cpuProtocolQ (4) -- CPU Protocol Queue } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the CPU queue" ::= { brcdTMCpuQStatsEntry 3 } brcdTMCpuQStatsPriority OBJECT-TYPE SYNTAX PortPriorityTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. This is 1-based index. The priority 0 maps to 1, priority 1 maps to 2 etc." ::= { brcdTMCpuQStatsEntry 4 } brcdTMCpuQStatsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the range of ports serviced by the brcdTMCpuQStatsTMDeviceId." ::= { brcdTMCpuQStatsEntry 5 } brcdTMCpuQStatsEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager" ::= { brcdTMCpuQStatsEntry 6 } brcdTMCpuQStatsEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager" ::= { brcdTMCpuQStatsEntry 7 } brcdTMCpuQStatsDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic Manager" ::= { brcdTMCpuQStatsEntry 8 } brcdTMCpuQStatsDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager" ::= { brcdTMCpuQStatsEntry 9 } brcdTMCpuQStatsTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMCpuQStatsEntry 10 } brcdTMCpuQStatsTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering" ::= { brcdTMCpuQStatsEntry 11 } brcdTMCpuQStatsOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted afterwards due to buffer full." ::= { brcdTMCpuQStatsEntry 12 } brcdTMCpuQStatsOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted afterwards due to buffer full" ::= { brcdTMCpuQStatsEntry 13 } brcdTMCpuQStatsWREDDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMCpuQStatsEntry 14 } brcdTMCpuQStatsWREDDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMCpuQStatsEntry 15 } brcdTMCpuQStatsMaxQDepthSinceLastRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum queue depth since last access to read." ::= { brcdTMCpuQStatsEntry 16 } brcdTMCpuQStatsQSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current size" ::= { brcdTMCpuQStatsEntry 17 } brcdTMCpuQStatsCreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current credit count" ::= { brcdTMCpuQStatsEntry 18 } -- The brcdTMMcastStreamQStatsTable table contains information of Traffic Manager -- (TM) Multicast stream queue related statistics on NI XMR/MLX platform. brcdTMMcastStreamQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMMcastStreamQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM Multicast stream queue stats entries. This table contains information of Traffic Manager(TM) Multicast stream queue counters supported by this system." ::= { brcdTMStatisticsInfo 6 } brcdTMMcastStreamQStatsEntry OBJECT-TYPE SYNTAX BrcdTMMcastStreamQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM Multicast stream queue counter information." INDEX { brcdTMMcastStreamQStatsAddressType, brcdTMMcastStreamQStatsSource, brcdTMMcastStreamQStatsGroup, brcdTMMcastStreamQStatsGroupPrefixLength } ::= { brcdTMMcastStreamQStatsTable 1 } BrcdTMMcastStreamQStatsEntry ::= SEQUENCE { brcdTMMcastStreamQStatsAddressType InetAddressType, brcdTMMcastStreamQStatsSource InetAddress, brcdTMMcastStreamQStatsGroup InetAddress, brcdTMMcastStreamQStatsGroupPrefixLength InetAddressPrefixLength, brcdTMMcastStreamQStatsPriority INTEGER, brcdTMMcastStreamQStatsEnquePkts Counter64, brcdTMMcastStreamQStatsEnqueBytes Counter64, brcdTMMcastStreamQStatsDequePkts Counter64, brcdTMMcastStreamQStatsDequeBytes Counter64, brcdTMMcastStreamQStatsTotalQDiscardPkts Counter64, brcdTMMcastStreamQStatsTotalQDiscardBytes Counter64, brcdTMMcastStreamQStatsOldestDiscardPkts Counter64, brcdTMMcastStreamQStatsOldestDiscardBytes Counter64, brcdTMMcastStreamQStatsWREDDroppedPkts Counter64, brcdTMMcastStreamQStatsWREDDroppedBytes Counter64, brcdTMMcastStreamQStatsMaxQDepthSinceLastRead Counter64, brcdTMMcastStreamQStatsQSize Unsigned32, brcdTMMcastStreamQStatsCreditCount Unsigned32 } brcdTMMcastStreamQStatsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "A value indicating the address family of the address contained in brcdTMMcastStreamQStatsSource and brcdTMMcastStreamQStatsGroup. Legal values correspond to the subset of address families for which multicast forwarding is supported." ::= { brcdTMMcastStreamQStatsEntry 1 } brcdTMMcastStreamQStatsSource OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Source IP address of the multicast stream." ::= { brcdTMMcastStreamQStatsEntry 2 } brcdTMMcastStreamQStatsGroup OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Group IP address of the multicast stream." ::= { brcdTMMcastStreamQStatsEntry 3 } brcdTMMcastStreamQStatsGroupPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length in bits of the mask which, when combined with the corresponding value of brcdTMMcastStreamQStatsGroup, identifies the groups for which this entry contains queue statistics. The InetAddressType is given by brcdTMMcastStreamQStatsAddressType. For values 'ipv4' and 'ipv4z', this object must be in the range 4..32. For values 'ipv6' and 'ipv6z', this object must be in the range 8..128." ::= { brcdTMMcastStreamQStatsEntry 4 } brcdTMMcastStreamQStatsPriority OBJECT-TYPE SYNTAX INTEGER { priority1And2 (1), -- Priority 1 and 2 priority3And4 (3), -- Priority 3 and 4 priority5And6 (5), -- Priority 5 and 6 priority7And8 (7) -- Priority 7 and 8 } MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. Two consecutive priorities are stored in one multicast stream queue." ::= { brcdTMMcastStreamQStatsEntry 5 } brcdTMMcastStreamQStatsEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager" ::= { brcdTMMcastStreamQStatsEntry 6 } brcdTMMcastStreamQStatsEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager" ::= { brcdTMMcastStreamQStatsEntry 7 } brcdTMMcastStreamQStatsDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets dequeued from ingress queues and forwarded on this traffic Manager" ::= { brcdTMMcastStreamQStatsEntry 8 } brcdTMMcastStreamQStatsDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes dequeued from ingress queues and forwarded on this traffic manager" ::= { brcdTMMcastStreamQStatsEntry 9 } brcdTMMcastStreamQStatsTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering." ::= { brcdTMMcastStreamQStatsEntry 10 } brcdTMMcastStreamQStatsTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes failing to enter ingress queues on this traffic manager. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering" ::= { brcdTMMcastStreamQStatsEntry 11 } brcdTMMcastStreamQStatsOldestDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager, but deleted afterwards due to buffer full." ::= { brcdTMMcastStreamQStatsEntry 12 } brcdTMMcastStreamQStatsOldestDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager, but deleted afterwards due to buffer full" ::= { brcdTMMcastStreamQStatsEntry 13 } brcdTMMcastStreamQStatsWREDDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all packets entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMMcastStreamQStatsEntry 14 } brcdTMMcastStreamQStatsWREDDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of all bytes entering ingress queues on this traffic manager but dropped due to WRED." ::= { brcdTMMcastStreamQStatsEntry 15 } brcdTMMcastStreamQStatsMaxQDepthSinceLastRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum queue depth since last access to read." ::= { brcdTMMcastStreamQStatsEntry 16 } brcdTMMcastStreamQStatsQSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current size" ::= { brcdTMMcastStreamQStatsEntry 17 } brcdTMMcastStreamQStatsCreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This queue's current credit count" ::= { brcdTMMcastStreamQStatsEntry 18 } -- The brcdTMCpuQInfoTable table contains information of Traffic Manager(TM) -- CPU Queues information on NI XMR/MLX platform. brcdTMCpuQInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMCpuQInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TM CPU queue information entries. This table contains information of Traffic Manager(TM) CPU Queue information supported by this system." ::= { brcdTMStatisticsInfo 7 } brcdTMCpuQInfoEntry OBJECT-TYPE SYNTAX BrcdTMCpuQInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM counter information." INDEX { brcdTMCpuQInfoSlotId, brcdTMCpuQInfoTMDeviceId } ::= { brcdTMCpuQInfoTable 1 } BrcdTMCpuQInfoEntry ::= SEQUENCE { brcdTMCpuQInfoSlotId Unsigned32, brcdTMCpuQInfoTMDeviceId Unsigned32, brcdTMCpuQInfoPriority0QSize Unsigned32, brcdTMCpuQInfoPriority0CreditCount Unsigned32, brcdTMCpuQInfoPriority1QSize Unsigned32, brcdTMCpuQInfoPriority1CreditCount Unsigned32, brcdTMCpuQInfoPriority2QSize Unsigned32, brcdTMCpuQInfoPriority2CreditCount Unsigned32, brcdTMCpuQInfoPriority3QSize Unsigned32, brcdTMCpuQInfoPriority3CreditCount Unsigned32, brcdTMCpuQInfoPriority4QSize Unsigned32, brcdTMCpuQInfoPriority4CreditCount Unsigned32, brcdTMCpuQInfoPriority5QSize Unsigned32, brcdTMCpuQInfoPriority5CreditCount Unsigned32, brcdTMCpuQInfoPriority6QSize Unsigned32, brcdTMCpuQInfoPriority6CreditCount Unsigned32, brcdTMCpuQInfoPriority7QSize Unsigned32, brcdTMCpuQInfoPriority7CreditCount Unsigned32 } brcdTMCpuQInfoSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ID of the LP module, which uniquely identifies a linecard. The LP module must be physically present and operationally up." ::= { brcdTMCpuQInfoEntry 1 } brcdTMCpuQInfoTMDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TM device ID, a number which uniquely identifies the network processor TM within a linecard in this system." ::= { brcdTMCpuQInfoEntry 2 } brcdTMCpuQInfoPriority0QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 0" ::= { brcdTMCpuQInfoEntry 3 } brcdTMCpuQInfoPriority0CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 0" ::= { brcdTMCpuQInfoEntry 4 } brcdTMCpuQInfoPriority1QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 1" ::= { brcdTMCpuQInfoEntry 5 } brcdTMCpuQInfoPriority1CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 1" ::= { brcdTMCpuQInfoEntry 6 } brcdTMCpuQInfoPriority2QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 2" ::= { brcdTMCpuQInfoEntry 7 } brcdTMCpuQInfoPriority2CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 2" ::= { brcdTMCpuQInfoEntry 8 } brcdTMCpuQInfoPriority3QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 3" ::= { brcdTMCpuQInfoEntry 9 } brcdTMCpuQInfoPriority3CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 3" ::= { brcdTMCpuQInfoEntry 10 } brcdTMCpuQInfoPriority4QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 4" ::= { brcdTMCpuQInfoEntry 11 } brcdTMCpuQInfoPriority4CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 4" ::= { brcdTMCpuQInfoEntry 12 } brcdTMCpuQInfoPriority5QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 5" ::= { brcdTMCpuQInfoEntry 13 } brcdTMCpuQInfoPriority5CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 5" ::= { brcdTMCpuQInfoEntry 14 } brcdTMCpuQInfoPriority6QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 6" ::= { brcdTMCpuQInfoEntry 15 } brcdTMCpuQInfoPriority6CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 6" ::= { brcdTMCpuQInfoEntry 16 } brcdTMCpuQInfoPriority7QSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the CPU Queue for the priority 7" ::= { brcdTMCpuQInfoEntry 17 } brcdTMCpuQInfoPriority7CreditCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The credit count of the CPU Queue for the priority 7" ::= { brcdTMCpuQInfoEntry 18 } -- The brcdTMDestUcastQStatTable table contains information of Traffic Manager(TM) -- unicast queue counters aggregated across all TMs per destination interface -- information on NI XMR/MLX platform. brcdTMDestUcastQStatTable OBJECT-TYPE SYNTAX SEQUENCE OF BrcdTMDestUcastQStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information of Traffic Manager(TM) unicast queue counters aggregated across all TMs per destination interface per priority. Entry with priority value equals to 128 includes per interface statistics aggregated across all priorities. Please refer to the MIB reference guide for pre-requisites of this table." ::= { brcdTMStatisticsInfo 8 } brcdTMDestUcastQStatEntry OBJECT-TYPE SYNTAX BrcdTMDestUcastQStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing TM unicast queue counters aggregated across all TMs per a given destination interface per priority." INDEX { brcdTMDestUcastQStatDestIfIndex, brcdTMDestUcastQStatPriority } ::= { brcdTMDestUcastQStatTable 1 } BrcdTMDestUcastQStatEntry ::= SEQUENCE { brcdTMDestUcastQStatDestIfIndex InterfaceIndex, brcdTMDestUcastQStatPriority PortPriorityTC, brcdTMDestUcastQStatEnquePkts Counter64, brcdTMDestUcastQStatEnqueBytes Counter64, brcdTMDestUcastQStatDequePkts Counter64, brcdTMDestUcastQStatDequeBytes Counter64, brcdTMDestUcastQStatTotalQDiscardPkts Counter64, brcdTMDestUcastQStatTotalQDiscardBytes Counter64 } brcdTMDestUcastQStatDestIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "ifIndex of the destination interface. All the interfaces of the LP modules that are physically present and operationally up will be included in this table. Starting from NetIron 5.3 release, all deployed LAG interfaces will also be included in this table." ::= { brcdTMDestUcastQStatEntry 1 } brcdTMDestUcastQStatPriority OBJECT-TYPE SYNTAX PortPriorityTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority of the packets that will be stored in this queue. This is 1-based value. The priority0 maps to 1, priority1 maps to 2 etc. Priority value equal to nonPriority(128) indicates the aggregated counters for the given destination port. When the tm-max-queues is set to 4, two consecutive priorities are stored in one unicast queue. In this case, the valid values for this index are 1, 3, 5, 7 and 128." ::= { brcdTMDestUcastQStatEntry 2 } brcdTMDestUcastQStatEnquePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total aggregated count of all packets entering ingress queue across all traffic managers." ::= { brcdTMDestUcastQStatEntry 3 } brcdTMDestUcastQStatEnqueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total aggregated count of all bytes entering ingress queue across all traffic managers." ::= { brcdTMDestUcastQStatEntry 4 } brcdTMDestUcastQStatDequePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total aggregated count of all packets dequeued/transmitted from ingress queue across all traffic managers." ::= { brcdTMDestUcastQStatEntry 5 } brcdTMDestUcastQStatDequeBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total aggregated count of all bytes dequeued/transmitted from ingress queue across all traffic managers." ::= { brcdTMDestUcastQStatEntry 6 } brcdTMDestUcastQStatTotalQDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For a virtual output queue, total aggregated count across all TMs of packets that were discarded, either before enqueueing due to WRED or maximum queue depth reached, or after enqueueing but before dequeueing due to aging." ::= { brcdTMDestUcastQStatEntry 7 } brcdTMDestUcastQStatTotalQDiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For a virtual output queue, total aggregated count across all TMs of bytes that were discarded, either before enqueueing due to WRED or maximum queue depth reached, or after enqueueing but before dequeueing due to aging." ::= { brcdTMDestUcastQStatEntry 8 } END