FOUNDRY-CAR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,Gauge32, Counter64,Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC snSwitch FROM FOUNDRY-SN-SWITCH-GROUP-MIB InterfaceIndex, ifIndex FROM IF-MIB; snCAR MODULE-IDENTITY LAST-UPDATED "201006020000Z" -- 04 June 2010 ORGANIZATION "Brocade Communications Systems, Inc." CONTACT-INFO "Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com" DESCRIPTION "Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." REVISION "201006020000Z" -- 04 June 2010 DESCRIPTION "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." REVISION "200909300000Z" -- September 30, 2009 DESCRIPTION "convert from SMIv1 to SMIv2" ::= { snSwitch 16} snPortCARs OBJECT IDENTIFIER ::= { snCAR 1 } -- Textual Conventions PacketSource::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " " SYNTAX INTEGER { input(0), --for inbound traffic output(1) --for outbound traffic } RateLimitType::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " " SYNTAX INTEGER{ all(3), -- all traffic. quickAcc(2), -- traffic matches rate-limit's access list. standardAcc(1) -- traffic matches standard access list. } RateLimitAction::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " " SYNTAX INTEGER { continue(1), drop(2), precedCont(3), precedXmit(4), xmit(5) } snPortCARTable OBJECT-TYPE SYNTAX SEQUENCE OF SnPortCAREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of rate limit configuration entries. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied to packets flowing into/out of an interface to regulate network traffic." ::= { snPortCARs 1 } snPortCAREntry OBJECT-TYPE SYNTAX SnPortCAREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of rate-limit configuration objects on this interface." INDEX { snPortCARifIndex, snPortCARDirection, snPortCARRowIndex } ::= { snPortCARTable 1 } SnPortCAREntry ::= SEQUENCE { snPortCARifIndex InterfaceIndex, snPortCARDirection PacketSource, snPortCARRowIndex INTEGER, snPortCARType RateLimitType, snPortCARAccIdx Integer32, snPortCARRate Integer32, snPortCARLimit Integer32, snPortCARExtLimit Integer32, snPortCARConformAction RateLimitAction, snPortCARExceedAction RateLimitAction, snPortCARStatSwitchedPkts Counter64, snPortCARStatSwitchedBytes Counter64, snPortCARStatFilteredPkts Counter64, snPortCARStatFilteredBytes Counter64, snPortCARStatCurBurst Gauge32 } snPortCARifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value for this rate limit entry." ::= { snPortCAREntry 1 } snPortCARDirection OBJECT-TYPE SYNTAX PacketSource MAX-ACCESS read-only STATUS current DESCRIPTION "The input or output transmission direction for the Rate Limit object. input (0), --for inbound traffic output(1) --for outbound traffic " ::= { snPortCAREntry 2 } snPortCARRowIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted." ::= { snPortCAREntry 3 } snPortCARType OBJECT-TYPE SYNTAX RateLimitType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of traffic rate-limited against." ::= { snPortCAREntry 4 } snPortCARAccIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index to the access list if RateLimitType is either quickAcc or standardAcc." ::= { snPortCAREntry 5 } snPortCARRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The comitted access rate. This determines the long term average transmission rate. Traffic that falls under this rate always conforms. This is average rate in bits per second." ::= { snPortCAREntry 6 } snPortCARLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the normal burst size that determines how large traffic bursts can be before some traffic exceeds the rate limit. This specifies the number of bytes that are guaranteed to be transported by the network at the average rate under normal conditions during committed time interval. This normal burst size is in bytes." ::= { snPortCAREntry 7 } snPortCARExtLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the extended burst limit that determines how large traffic bursts can be before all the traffic exceeds the rate limit. This burst size is in bytes." ::= { snPortCAREntry 8 } snPortCARConformAction OBJECT-TYPE SYNTAX RateLimitAction MAX-ACCESS read-only STATUS current DESCRIPTION "Action to be taken when the traffic is within the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate limits. precedXmit rewrite the IP precedence and transmit the packet. precedCont rewrite the IP precedence and allow it evaluated by subsequent rate limits." ::= { snPortCAREntry 9 } snPortCARExceedAction OBJECT-TYPE SYNTAX RateLimitAction MAX-ACCESS read-only STATUS current DESCRIPTION "Action to be taken when the traffic exceeds the Rate Limit.drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate limits. precedXmit rewrite the IP precedence and transmit the packet. precedCont rewrite the IP precedence and allow it evaluated by subsequent rate limits." ::= { snPortCAREntry 10 } snPortCARStatSwitchedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of packets permitted by this rate limit." ::= { snPortCAREntry 11 } snPortCARStatSwitchedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of bytes permitted by this interface." ::= { snPortCAREntry 12 } snPortCARStatFilteredPkts OBJECT-TYPE SYNTAX Counter64 --UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of packets which exceeded this rate limit." ::= { snPortCAREntry 13 } snPortCARStatFilteredBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of bytes which exceeded this rate limit." ::= { snPortCAREntry 14 } snPortCARStatCurBurst OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current received burst size." ::= { snPortCAREntry 15 } -- end of snPortCARTable -- RL Counter Table agRateLimitCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF AgRateLimitCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of rate limit counter entries." ::= { snPortCARs 2 } agRateLimitCounterEntry OBJECT-TYPE SYNTAX AgRateLimitCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of rate-limit counter objects on a interface, direction and configuration row index within that interface." INDEX { ifIndex, snPortCARRowIndex } ::= { agRateLimitCounterTable 1 } AgRateLimitCounterEntry ::= SEQUENCE { agRateLimitCounterFwdedOctets Counter64, agRateLimitCounterDroppedOctets Counter64, agRateLimitCounterReMarkedOctets Counter64, agRateLimitCounterTotalOctets Counter64 } agRateLimitCounterFwdedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The forwarded octet count for this rate limit entry." ::= { agRateLimitCounterEntry 1 } agRateLimitCounterDroppedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The dropped octet count for this rate limit entry." ::= { agRateLimitCounterEntry 2 } agRateLimitCounterReMarkedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The remarked octet count for this rate limit entry." ::= { agRateLimitCounterEntry 3 } agRateLimitCounterTotalOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total octet count for this rate limit entry." ::= { agRateLimitCounterEntry 4 } END -- ***************************************************************** -- Foundry Commited Access Rate MIB file. -- *****************************************************************