FOUNDRY-SN-APPLETALK-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,Counter32,Integer32
		FROM SNMPv2-SMI
	router
		FROM FOUNDRY-SN-ROOT-MIB
	RtrStatus, ClearStatus, RowSts, PortIndex, Action
		FROM FOUNDRY-SN-IP-MIB;

snAppleTalk MODULE-IDENTITY
    LAST-UPDATED "201006020000Z"  -- 04 June 2010
    ORGANIZATION "Brocade Communications Systems, Inc."
    CONTACT-INFO
             "Technical Support Center
              130 Holger Way,
              San Jose, CA  95134
              Email:  ipsupport@brocade.com
              Phone: 1-800-752-8061
              URL:  www.brocade.com"
    DESCRIPTION
             "Copyright 1996-2010 Brocade Communications Systems, Inc.
              All rights reserved.
              This Brocade Communications Systems SNMP Management Information Base Specification
              embodies Brocade Communications Systems' confidential and proprietary
              intellectual property. Brocade Communications Systems retains all
              title and ownership in the Specification, including any revisions.

              This Specification is supplied AS IS, and Brocade Communications Systems makes
              no warranty, either express or implied, as to the use,
              operation, condition, or performance of the specification, and any unintended
              consequence it may on the user environment."

    REVISION        "201006020000Z"  -- 04 June 2010
    DESCRIPTION
        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."

    REVISION     "200909300000Z" -- September 30, 2009
    DESCRIPTION
			"convert from SMIv1 to SMIv2"
   ::= {router  10}

	ATNetworkNumber ::=         -- 2 octets of net number
								-- in network byte order
		OCTET STRING (SIZE (2))

	DdpNodeAddress ::=          -- 2 octets of net number
								-- in network byte order,
								-- 1 octet of node number
		OCTET STRING (SIZE (3))

	ATName ::=                  -- 0 to 32 octets of AppleTalk
								-- ASCII [Inside AppleTalk]
		OCTET STRING (SIZE (0..32))


-- SECTION 2: MIB

-- Router AppleTalk MIB
-- This section contains AppleTalk specific router MIB object definitions.

-- AppleTalk general group

snRtATGeneral               OBJECT IDENTIFIER ::= { snAppleTalk 1 }

snRtATRoutingEnable            OBJECT-TYPE
	SYNTAX  RtrStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enable/disable AppleTalk routing function on this box."
	::= { snRtATGeneral 1 }

snRtATClearArpCache            OBJECT-TYPE
	SYNTAX  ClearStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"clear(1) will clear AppleTalk arp cache table."
	::= { snRtATGeneral 2 }

snRtATClearFwdCache            OBJECT-TYPE
	SYNTAX  ClearStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"clear(1) will clear AppleTalk forward cache table."
	::= { snRtATGeneral 3 }

snRtATClearRoute               OBJECT-TYPE
	SYNTAX  ClearStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"clear(1) will clear AppleTalk route table."
	::= { snRtATGeneral 4 }

snRtATClearTrafficCounters     OBJECT-TYPE
	SYNTAX  ClearStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"clear(1) will clear AppleTalk network statistics counters."
	::= { snRtATGeneral 5 }

snRtATArpRetransmitCount       OBJECT-TYPE
	SYNTAX  INTEGER (1..10)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The number of AppleTalk ARP request retransmits if the
		first request timeouts."
	DEFVAL  { 2 }
	::= { snRtATGeneral 6 }

snRtATArpRetransmitInterval    OBJECT-TYPE
	SYNTAX  INTEGER (1..120)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The waiting time interval for an AppleTalk ARP response
		before retransmission of an ARP request. Each unit value
		is one second."
	DEFVAL  { 1 }
	::= { snRtATGeneral 7 }

snRtATGleanPacketsEnable       OBJECT-TYPE
	SYNTAX  RtrStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enable/disable AppleTalk glean packets function on this box."
	DEFVAL  { disabled }
	::= { snRtATGeneral 8 }

snRtATRtmpUpdateInterval       OBJECT-TYPE
	SYNTAX  INTEGER (1..3600)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The periodic time interval to transmit a RTMP
		update. Each unit value is one second."
	DEFVAL  { 10 }
	::= { snRtATGeneral 9 }

snRtATZipQueryInterval         OBJECT-TYPE
	SYNTAX  INTEGER (1..1000)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The periodic time interval to transmit a ZIP
		query. Each unit value is one second."
	DEFVAL  { 10 }
	::= { snRtATGeneral 10 }

snRtATInRtmpPkts               OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of RTMP packets received by
		this entity."
	::= { snRtATGeneral 11 }

snRtATOutRtmpPkts              OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of RTMP packets which were
		transmitted from this entity."
	::= { snRtATGeneral 12 }

snRtATFilteredRtmpPkts         OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of RTMP packets which were
		filtered by this entity."
	::= { snRtATGeneral 13 }

snRtATInZipPkts                OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of ZIP packets received by
		this entity."
	::= { snRtATGeneral 14 }

snRtATOutZipPkts               OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of ZIP packets which were
		transmitted from this entity."
	::= { snRtATGeneral 15 }

snRtATInZipGZLPkts             OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of ZIP get zone list packets received by
		this entity."
	::= { snRtATGeneral 16 }

snRtATOutZipGZLPkts            OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of ZIP get zone list packets which were
		transmitted from this entity."
	::= { snRtATGeneral 17 }

snRtATInZipNetInfoPkts         OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of ZIP network information packets received by
		this entity."
	::= { snRtATGeneral 18 }

snRtATOutZipNetInfoPkts        OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of ZIP network information packets which were
		transmitted from this entity."
	::= { snRtATGeneral 19 }

snRtATInDdpPkts                OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of DDP datagrams received by
		this entity."
	::= { snRtATGeneral 20 }

snRtATOutDdpPkts               OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of DDP datagrams which were
		transmitted from this entity."
	::= { snRtATGeneral 21 }

snRtATForwardedDdpPkts         OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of input DDP datagrams for which this entity
		was not their final DDP destination, as a result of
		which an attempt was made to find a route to forward
		them to that final destination."
	::= { snRtATGeneral 22 }

snRtATInDeliveredDdpPkts       OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of input DDP datagrams for which
		this entity was their final DDP destination."
	::= { snRtATGeneral 23 }

snRtATDroppedNoRouteDdpPkts    OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of DDP datagrams dropped because a
		route could not be found to their final destination."
	::= { snRtATGeneral 24 }

snRtATDroppedBadHopCountsDdpPkts OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of input DDP datagrams dropped
		because this entity was not their final destination
		and their hop count would exceed 15."
	::= { snRtATGeneral 25 }

snRtATDroppedOtherReasonsDdpPkts OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of DDP datagrams dropped because
		of other reasons, e.g. run out of resouces."
	::= { snRtATGeneral 26 }

snRtATInAarpPkts               OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of AppleTalk ARP packets received by
		this entity."
	::= { snRtATGeneral 27 }

snRtATOutAarpPkts              OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of AppleTalk ARP packets which were
		transmitted from this entity."
	::= { snRtATGeneral 28 }


-- AppleTalk socket priority table

snRtATSocketPriorityTable      OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATSocketPriorityEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"AppleTalk socket priority table."
	::= { snAppleTalk 2 }

snRtATSocketPriorityEntry      OBJECT-TYPE
	SYNTAX  SnRtATSocketPriorityEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the AppleTalk socket priority table."
	INDEX   { snRtATSocketPrioritySocket }
	::= { snRtATSocketPriorityTable 1 }

SnRtATSocketPriorityEntry ::= SEQUENCE {
	snRtATSocketPrioritySocket
		INTEGER,
	snRtATSocketPriorityPriority
		INTEGER
	}

snRtATSocketPrioritySocket     OBJECT-TYPE
	SYNTAX  INTEGER (1..254)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Socket number for a socket priority entry."
	::= { snRtATSocketPriorityEntry 1 }

snRtATSocketPriorityPriority OBJECT-TYPE
	SYNTAX  INTEGER {
		level0(0),
		level1(1),
		level2(2),
		level3(3),
		level4(4),
		level5(5),
		level6(6),
		level7(7)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Standalone router Priority level applies to a socket number:
		 low(0)   -- low prority
		 high(1) -- high prority.
		 The BigIron Priority levels applies to a socket number are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snRtATSocketPriorityEntry 2 }


-- AppleTalk interface zone filter table

snRtATPortZoneFilterTable      OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATPortZoneFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"AppleTalk interface zone filter table."
	::= { snAppleTalk 3 }

snRtATPortZoneFilterEntry      OBJECT-TYPE
	SYNTAX  SnRtATPortZoneFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the AppleTalk interface zone filter table."
	INDEX   { snRtATPortZoneFilterPortIndex, snRtATPortZoneFilterZone }
	::= { snRtATPortZoneFilterTable 1 }

SnRtATPortZoneFilterEntry ::= SEQUENCE {
	snRtATPortZoneFilterPortIndex
		PortIndex,
	snRtATPortZoneFilterZone
		ATName,
	snRtATPortZoneFilterAction
		Action,
	snRtATPortZoneFilterRtmpEnable
		RtrStatus,
	snRtATPortZoneFilterRowStatus
		RowSts
	}

snRtATPortZoneFilterPortIndex  OBJECT-TYPE
	SYNTAX  PortIndex
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port index for a zone filter entry."
	::= { snRtATPortZoneFilterEntry 1 }

snRtATPortZoneFilterZone       OBJECT-TYPE
	SYNTAX  ATName
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The zone name granted for this filter."
	::= { snRtATPortZoneFilterEntry 2 }

snRtATPortZoneFilterAction     OBJECT-TYPE
	SYNTAX  Action
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Action to take if the AppleTalk packet match
		with this filter."
	::= { snRtATPortZoneFilterEntry 3 }

snRtATPortZoneFilterRtmpEnable OBJECT-TYPE
	SYNTAX  RtrStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enable/disable RTMP filtering."
	::= { snRtATPortZoneFilterEntry 4 }

snRtATPortZoneFilterRowStatus  OBJECT-TYPE
	SYNTAX  RowSts
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"To create or delete a zone filter entry."
	::= { snRtATPortZoneFilterEntry 5 }


-- AppleTalk port table

snRtATPortTable                OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATPortEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"AppleTalk port table."
	::= { snAppleTalk 4 }

snRtATPortEntry                OBJECT-TYPE
	SYNTAX  SnRtATPortEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the AppleTalk port table."
	INDEX   { snRtATPortIndex }
	::= { snRtATPortTable 1 }

SnRtATPortEntry ::= SEQUENCE {
	snRtATPortIndex
		PortIndex,
	snRtATPortArpAge
		INTEGER,
	snRtATPortState
		INTEGER,
	snRtATPortSeedRouter
		INTEGER,
	snRtATPortOperationMode
		INTEGER
	}

snRtATPortIndex                OBJECT-TYPE
	SYNTAX  PortIndex
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port index for port table entry."
	::= { snRtATPortEntry 1 }

snRtATPortArpAge               OBJECT-TYPE
	SYNTAX  INTEGER (0..240)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The time in minutes an ARP entry can
		be valid without relearning.
		0 - Don't age."
	DEFVAL  { 10 }
	::= { snRtATPortEntry 2 }

snRtATPortState                OBJECT-TYPE
	SYNTAX  INTEGER {
			 other(1),
			 down(2),
			 up(3) }
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The up and down state of this port."
	::= { snRtATPortEntry 3 }

snRtATPortSeedRouter           OBJECT-TYPE
	SYNTAX  INTEGER {
			 other(1),
			 seedRouter(2),
			 nonSeedRouter(3) }
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"This port was configured to seed or non-seed router."
	::= { snRtATPortEntry 4 }

snRtATPortOperationMode        OBJECT-TYPE
	SYNTAX  INTEGER {
			 other(1),
			 seedRouter(2),
			 nonSeedRouter(3),
			 notOperational(4),
			 routingDisabled(5) }
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The operation mode of this port."
	::= { snRtATPortEntry 5 }


-- AppleTalk forwarding cache table

snRtATFwdCacheTable            OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATFwdCacheEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"AppleTalk forwarding cache table."
	::= { snAppleTalk 5 }

snRtATFwdCacheEntry            OBJECT-TYPE
	SYNTAX  SnRtATFwdCacheEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the AppleTalk forwarding cache table."
	INDEX   { snRtATFwdCacheIndex }
	::= { snRtATFwdCacheTable 1 }

SnRtATFwdCacheEntry ::= SEQUENCE {
	snRtATFwdCacheIndex
		Integer32,
	snRtATFwdCacheNetAddr
		DdpNodeAddress,
	snRtATFwdCacheMacAddr
		OCTET STRING,
	snRtATFwdCacheNextHop
		DdpNodeAddress,
	snRtATFwdCacheOutgoingPort
		Integer32,
	snRtATFwdCacheType
		INTEGER,
	snRtATFwdCacheAction
		INTEGER,
	snRtATFwdCacheVLanId
		Integer32
	}

snRtATFwdCacheIndex            OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The table index for an AppleTalk forwarding cache table entry."
	::= { snRtATFwdCacheEntry 1 }

snRtATFwdCacheNetAddr          OBJECT-TYPE
	SYNTAX  DdpNodeAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The AppleTalk network address of a station."
	::= { snRtATFwdCacheEntry 2 }

snRtATFwdCacheMacAddr          OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE (6))
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The Mac address of an AppleTalk station."
	::= { snRtATFwdCacheEntry 3 }

snRtATFwdCacheNextHop          OBJECT-TYPE
	SYNTAX  DdpNodeAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The next hop router network address."
	::= { snRtATFwdCacheEntry 4 }

snRtATFwdCacheOutgoingPort     OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The outgoing port of which packets will forward to.
		Return port value of zero to indicate no outgoing port
		associated to this entry."
	::= { snRtATFwdCacheEntry 5 }

snRtATFwdCacheType             OBJECT-TYPE
	SYNTAX  INTEGER { dynamic(1), permanent(2) }
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The 'dynamic' or 'permanent' type for an AppleTalk forwarding
		cache table entry."
	::= { snRtATFwdCacheEntry 6 }

snRtATFwdCacheAction           OBJECT-TYPE
	SYNTAX  INTEGER {
			other(1),
			forward(2),
			forUs(3),
			waitForArp(4),
			dropPacket(5)
			}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The action to take."
	::= { snRtATFwdCacheEntry 7 }

snRtATFwdCacheVLanId        OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN ID for an AppleTalk forwarding cache table entry.
		Return VLAN ID value of zero to indicate no VLAN associated
		to this entry."
	::= { snRtATFwdCacheEntry 8 }


-- AppleTalk zone table

snRtATZoneTable            OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATZoneEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"AppleTalk zone table."
	::= { snAppleTalk 6 }

snRtATZoneEntry            OBJECT-TYPE
	SYNTAX  SnRtATZoneEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the AppleTalk zone table."
	INDEX   { snRtATZoneIndex }
	::= { snRtATZoneTable 1 }

SnRtATZoneEntry ::= SEQUENCE {
	snRtATZoneIndex
	Integer32,
	snRtATZoneNetStart
		ATNetworkNumber,
	snRtATZoneNetEnd
		ATNetworkNumber,
	snRtATZoneName
		ATName
	}

snRtATZoneIndex            OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The table index for an AppleTalk zone table entry."
	::= { snRtATZoneEntry 1 }

snRtATZoneNetStart         OBJECT-TYPE
	SYNTAX  ATNetworkNumber
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The first AppleTalk network address in the range
		of this zone name."
	::= { snRtATZoneEntry 2 }

snRtATZoneNetEnd           OBJECT-TYPE
	SYNTAX  ATNetworkNumber
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The last AppleTalk network address in the range
		of this zone name."
	::= { snRtATZoneEntry 3 }

snRtATZoneName             OBJECT-TYPE
	SYNTAX  ATName
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The zone name."
	::= { snRtATZoneEntry 4 }


-- AppleTalk additional zone filter table

snRtATAddZoneFilterTable       OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATAddZoneFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"AppleTalk additional zone filter table. Additional zones
		are those zones that do not match any zones defined in the
		zone filter table."
	::= { snAppleTalk 7 }

snRtATAddZoneFilterEntry       OBJECT-TYPE
	SYNTAX  SnRtATAddZoneFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the AppleTalk additional zone filter table."
	INDEX   { snRtATAddZoneFilterPortIndex }
	::= { snRtATAddZoneFilterTable 1 }

SnRtATAddZoneFilterEntry ::= SEQUENCE {
	snRtATAddZoneFilterPortIndex
		PortIndex,
	snRtATAddZoneFilterAction
		Action,
	snRtATAddZoneFilterRtmpEnable
		RtrStatus
	}

snRtATAddZoneFilterPortIndex   OBJECT-TYPE
	SYNTAX  PortIndex
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port index for additional zone filter table entry."
	::= { snRtATAddZoneFilterEntry 1 }

snRtATAddZoneFilterAction      OBJECT-TYPE
	SYNTAX  Action
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Action to take if no zone filter match."
	::= { snRtATAddZoneFilterEntry 2 }

snRtATAddZoneFilterRtmpEnable  OBJECT-TYPE
	SYNTAX  RtrStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enable/disable RTMP filtering on additional zone."
	::= { snRtATAddZoneFilterEntry 3 }

END