FOUNDRY-SN-POS-GROUP-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,Counter32, Gauge32, Unsigned32,Integer32
		FROM SNMPv2-SMI
	router
		FROM FOUNDRY-SN-ROOT-MIB
	ifIndex
		FROM IF-MIB
	DisplayString,TEXTUAL-CONVENTION
		FROM SNMPv2-TC;

snPOS MODULE-IDENTITY
    LAST-UPDATED "201006020000Z"  -- 04 June 2010
    ORGANIZATION "Brocade Communications Systems, Inc."
    CONTACT-INFO
             "Technical Support Center
              130 Holger Way,
              San Jose, CA  95134
              Email:  ipsupport@brocade.com
              Phone: 1-800-752-8061
              URL:  www.brocade.com"
    DESCRIPTION
             "Copyright 1996-2010 Brocade Communications Systems, Inc.
              All rights reserved.
              This Brocade Communications Systems SNMP Management Information Base Specification
              embodies Brocade Communications Systems' confidential and proprietary
              intellectual property. Brocade Communications Systems retains all
              title and ownership in the Specification, including any revisions.

              This Specification is supplied AS IS, and Brocade Communications Systems makes
              no warranty, either express or implied, as to the use,
              operation, condition, or performance of the specification, and any unintended
              consequence it may on the user environment."

    REVISION        "201006020000Z"  -- 04 June 2010
    DESCRIPTION
        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."

    REVISION     "200909300000Z" -- September 30, 2009
    DESCRIPTION
			""
   ::= { router 14}

	-- textual conventions

	POSStatus ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			Status Values
			"
		SYNTAX	INTEGER { disabled(0), enabled(1) }

snPOSInfo						OBJECT IDENTIFIER	  ::= { snPOS 1  }

-- POS Port table information

snPOSInfoTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnPOSInfoEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A specific snPOSInfo group consists of a number of
		 switch ports.  "
	::= { snPOSInfo 1 }

snPOSInfoEntry OBJECT-TYPE
	SYNTAX  SnPOSInfoEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the snPOSInfo table indicates the
		 configuration on a specified port. A SNMP SET PDU
		 for a row of the snPOSInfoTable requires the entired
		 sequence of the MIB Objects in each
		 snPOSInfoEntry stored in one PDU.  Otherwise,
		 GENERR return-value will be returned."
	INDEX   {
		snPOSInfoPortNum
	}
	::= { snPOSInfoTable 1 }

SnPOSInfoEntry ::= SEQUENCE {
	snPOSInfoPortNum
		Integer32,
	snPOSIfIndex
		Integer32,
	snPOSDescr
		DisplayString,
	snPOSName
		DisplayString,
	snPOSInfoSpeed
		INTEGER,
	snPOSInfoAdminStatus
		INTEGER,
	snPOSInfoLinkStatus
		INTEGER,
	snPOSInfoClock
		INTEGER,
	snPOSInfoLoopBack
		INTEGER,
	snPOSInfoScrambleATM
		POSStatus,
	snPOSInfoFraming
		INTEGER,
	snPOSInfoCRC
		INTEGER,
	snPOSInfoKeepAlive
		INTEGER,
	snPOSInfoFlagC2
		INTEGER,
	snPOSInfoFlagJ0
		INTEGER,
	snPOSInfoFlagH1
		INTEGER,
	snPOSStatsInFrames
		Counter32,
	snPOSStatsOutFrames
		Counter32,
	snPOSStatsAlignErrors
		Counter32,
	snPOSStatsFCSErrors
		Counter32,
	snPOSStatsFrameTooLongs
		Counter32,
	snPOSStatsFrameTooShorts
		Counter32,
	snPOSStatsInDiscard
		Counter32,
	snPOSStatsOutDiscard
		Counter32,
	snPOSInOctets
		OCTET STRING,
	snPOSOutOctets
		OCTET STRING,
	snPOSStatsInBitsPerSec
		Gauge32,
	snPOSStatsOutBitsPerSec
		Gauge32,
	snPOSStatsInPktsPerSec
		Gauge32,
	snPOSStatsOutPktsPerSec
		Gauge32,
	snPOSStatsInUtilization
		INTEGER ,
	snPOSStatsOutUtilization
		INTEGER ,
	snPOSTagType
		INTEGER,
	snPOSStatsB1
		Counter32,
	snPOSStatsB2
		Counter32,
	snPOSStatsB3
		Counter32,
	snPOSStatsAIS
		Counter32,
	snPOSStatsRDI
		Counter32,
	snPOSStatsLOP
		Counter32,
	snPOSStatsLOF
		Counter32,
	snPOSStatsLOS
		Counter32
	}


snPOSInfoPortNum OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port index.
		 The bit 0 to bit 7: port number.
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snPOSInfoEntry 1 }


snPOSIfIndex OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"In order to identify a particular interface, this
		object shall identify the instance of the ifIndex
		object, defined in RFC 1213 and RFC 1573."
	::= { snPOSInfoEntry 2 }


snPOSDescr OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"A textual string containing the slot/port information
		about the interface."
	::= { snPOSInfoEntry 3 }


snPOSName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..255))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Port Name string."
	::= { snPOSInfoEntry 4 }

snPOSInfoSpeed OBJECT-TYPE
	SYNTAX  INTEGER {
		s155000(1),
		s622000(2),
		other(3),
		s2488000(4)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The speed configuration for a port. The values are:
		155000
		622000
		2488000
		"
	::= { snPOSInfoEntry 5 }


snPOSInfoAdminStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		up(1),       -- ready to pass packets
		down(2),
		testing(3)   -- in some test mode
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The desired state of all ports.  The
		testing(3) state indicates that no operational
		packets can be passed.
		(same as ifAdminStatus in MIB-II)"
	::= { snPOSInfoEntry 6 }


snPOSInfoLinkStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		up(1),       -- ready to pass packets
		down(2),
		testing(3)   -- in some test mode
		}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The current operational state of the interface.
		 The testing(3) state indicates that no operational
		 packets can be passed.
		 (same as ifOperStatus in MIB-II)"
	::= { snPOSInfoEntry 7 }


snPOSInfoClock  OBJECT-TYPE
	SYNTAX  INTEGER {
		internal(1),
		line(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Clock default internal"
	::= { snPOSInfoEntry 8 }

snPOSInfoLoopBack   OBJECT-TYPE
	SYNTAX  INTEGER {
		line(1),
		internal(2),
		none(3)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Loop back default none"
	::= { snPOSInfoEntry 9 }

snPOSInfoScrambleATM  OBJECT-TYPE
	SYNTAX	POSStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"ATM style scrambling default off"
	::= { snPOSInfoEntry 10 }

snPOSInfoFraming  OBJECT-TYPE
	SYNTAX  INTEGER {
		sonet(1),
		sdh(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Framing default SONET"
	::= { snPOSInfoEntry 11 }

snPOSInfoCRC  OBJECT-TYPE
	SYNTAX  INTEGER {
		crc32bits(1),
		crc16bits(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"CRC default 32 bit"
	::= { snPOSInfoEntry 12 }

snPOSInfoKeepAlive  OBJECT-TYPE
	SYNTAX  INTEGER (0..32767)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Keep-alive default 10"
	::= { snPOSInfoEntry 13 }

snPOSInfoFlagC2  OBJECT-TYPE
	SYNTAX  INTEGER (0..255)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"C2 flag"
	::= { snPOSInfoEntry 14 }


snPOSInfoFlagJ0  OBJECT-TYPE
	SYNTAX  INTEGER (0..255)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"J0 flag"
	::= { snPOSInfoEntry 15 }

snPOSInfoFlagH1  OBJECT-TYPE
	SYNTAX  INTEGER (0..255)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"H1 flag"
	::= { snPOSInfoEntry 16 }

snPOSStatsInFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of packets received on the interface."
	::= { snPOSInfoEntry 17 }


snPOSStatsOutFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of packets transmitted out of the interface."
	::= { snPOSInfoEntry 18 }


snPOSStatsAlignErrors   OBJECT-TYPE
	 SYNTAX     Counter32
	 MAX-ACCESS     read-only
	 STATUS     current
	 DESCRIPTION
		"dot3StatsAlignmentErrors : A count of frames
		received on a particular interface that are
		not an integral number of octets in length
		and do not pass the FCS check.

		The count represented by an instance of this
		object is incremented when the alignmentError
		status is returned by the MAC service to the
		LLC (or other MAC user). Received frames for
		which multiple error conditions obtain are,
		according to the conventions of IEEE 802.3
		Layer Management, counted exclusively according
		to the error status presented to the LLC."
	::= { snPOSInfoEntry 19 }

snPOSStatsFCSErrors   OBJECT-TYPE
	 SYNTAX      Counter32
	 MAX-ACCESS      read-only
	 STATUS      current
	 DESCRIPTION
		"dot3StatsFCSErrors : A count of frames received
		on a particular interface that are an integral
		number of octets in length but do not pass the
		FCS check.

		The count represented by an instance of this
		object is incremented when the frameCheckError
		status is returned by the MAC service to the
		LLC (or other MAC user). Received frames for
		which multiple error conditions obtain are,
		according to the conventions of IEEE 802.3
		Layer Management, counted exclusively according
		to the error status presented to the LLC."
	::= { snPOSInfoEntry 20 }


snPOSStatsFrameTooLongs   OBJECT-TYPE
	 SYNTAX    Counter32
	 MAX-ACCESS    read-only
	 STATUS    current
	 DESCRIPTION
		"dot3StatsFrameTooLongs : A count of frames
		received on a particular interface that
		exceed the maximum permitted frame size.

		The count represented by an instance of this
		object is incremented when the frameTooLong
		status is returned by the MAC service to the
		LLC (or other MAC user). Received frames for
		which multiple error conditions obtain are,
		according to the conventions of IEEE 802.3
		Layer Management, counted exclusively according
		to the error status presented to the LLC."
	::= { snPOSInfoEntry 21 }


snPOSStatsFrameTooShorts   OBJECT-TYPE
	 SYNTAX    Counter32
	 MAX-ACCESS    read-only
	 STATUS    current
	 DESCRIPTION
		" A count of frames received on a particular
		interface that below the minimum permitted
		frame size."
	::= { snPOSInfoEntry 22 }

snPOSStatsInDiscard OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of inbound packets which were chosen
		 to be discarded even though no errors had been
		 detected to prevent their being deliverable to a
		 higher-layer protocol.  One possible reason for
		 discarding such a packet could be to free up
		 buffer space."
	::= { snPOSInfoEntry 23 }


snPOSStatsOutDiscard OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of outbound packets which were chosen
		 to be discarded even though no errors had been
		 detected to prevent their being transmitted.  One
		 possible reason for discarding such a packet could
		 be to free up buffer space."
	::= { snPOSInfoEntry 24 }

snPOSInOctets OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(8))
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of octets received on the interface,
		including framing characters. This object is a 64-bit
		counter of the ifInOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
	::= { snPOSInfoEntry 25 }


snPOSOutOctets OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(8))
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of octets transmitted out of the interface,
		including framing characters. This object is a 64-bit
		counter of the ifOutOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
	::= { snPOSInfoEntry 26 }


snPOSStatsInBitsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of bits per second received on the interface
		over a 5 minutes interval."
	::= { snPOSInfoEntry 27 }


snPOSStatsOutBitsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of bits per second transmitted out of the interface
		over a 5 minutes interval."
	::= { snPOSInfoEntry 28 }


snPOSStatsInPktsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of packets per second received on the interface
		over a 5 minutes interval."
	::= { snPOSInfoEntry 29 }


snPOSStatsOutPktsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of packets per second transmitted out of the interface
		over a 5 minutes interval."
	::= { snPOSInfoEntry 30 }


snPOSStatsInUtilization OBJECT-TYPE
	SYNTAX  INTEGER (0..10000)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The input network utilization in hundredths of a percent
		over a 5 minutes interval."
	::= { snPOSInfoEntry 31 }


snPOSStatsOutUtilization OBJECT-TYPE
	SYNTAX  INTEGER (0..10000)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The output network utilization in hundredths of a percent
		over a 5 minutes interval."
	::= { snPOSInfoEntry 32 }

snPOSTagType OBJECT-TYPE
	SYNTAX  INTEGER {
		tagged(1),
		untagged(2)
		}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"For tagged port, we could have multiple VLANs
		 per port."
	::= {snPOSInfoEntry  33}

snPOSStatsB1 OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Section error monitoring."
	::= { snPOSInfoEntry 34 }

snPOSStatsB2 OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Line error monitoring."
	::= { snPOSInfoEntry 35 }

snPOSStatsB3 OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Path error monitoring."
	::= { snPOSInfoEntry 36 }

snPOSStatsAIS OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Alarm indication signal."
	::= { snPOSInfoEntry 37 }

snPOSStatsRDI OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Remote defect indication."
	::= { snPOSInfoEntry 38 }

snPOSStatsLOP OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Loss of pointer."
	::= { snPOSInfoEntry 39 }

snPOSStatsLOF OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Loss of frame."
	::= { snPOSInfoEntry 40 }

snPOSStatsLOS OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Loss of signal."
	::= { snPOSInfoEntry 41 }

-- POS Port table information

snPOSInfo2Table OBJECT-TYPE
	SYNTAX		SEQUENCE OF SnPOSInfo2Entry
	MAX-ACCESS		not-accessible
	STATUS		current
	DESCRIPTION
		"An snPOSInfo2Table consists of a number of
		 SnPOSInfo2Entry entries"
	::= { snPOSInfo 2 }

snPOSInfo2Entry OBJECT-TYPE
	SYNTAX		SnPOSInfo2Entry
	MAX-ACCESS		not-accessible
	STATUS		current
	DESCRIPTION
		"An entry in the snPOSInfo2Table indicates the
		 POS configuration on a specified port"
	INDEX {
		ifIndex
	}
	::= { snPOSInfo2Table 1 }

SnPOSInfo2Entry ::= SEQUENCE {
	snPOSInfo2Clock
		INTEGER,
	snPOSInfo2ScrambleATM
		POSStatus,
	snPOSInfo2CRC
		INTEGER,
	snPOSInfo2KeepAlive
		Unsigned32,
	snPOSInfo2FlagC2
		Unsigned32,
	snPOSInfo2SSM
		INTEGER,
	snPOSInfo2Encapsulation
		INTEGER,
	snPOSInfo2AlarmMonitoring
		INTEGER,
	snPOSInfo2OverheadJ0ExpectedMessage
		OCTET STRING,
	snPOSInfo2OverheadJ0TransmitMessage
		OCTET STRING,
	snPOSInfo2OverheadJ1ExpectedMessage
		OCTET STRING,
	snPOSInfo2OverheadJ1MessageLength
		INTEGER,
	snPOSInfo2OverheadJ1TransmitMessage
		OCTET STRING
	}

snPOSInfo2Clock  OBJECT-TYPE
	SYNTAX		INTEGER {
		internal(1),
		line(2)
	}
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Clock source for the POS Interface
		 internal(1) - internal source
		 line    (2) - clocking is derived from line"
	DEFVAL		{ internal }
	::= { snPOSInfo2Entry 1 }

snPOSInfo2ScrambleATM  OBJECT-TYPE
	SYNTAX		POSStatus
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"ATM style scrambling for the POS interface
		 disabled(0)  - scrambling is disabled
		 enabled(1)   - scrambling is enabled"
	DEFVAL		{ disabled }
	::= { snPOSInfo2Entry 2 }

snPOSInfo2CRC  OBJECT-TYPE
	SYNTAX		INTEGER {
		crc32bits(1),
		crc16bits(2)
	}
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Length of Cyclic Redundnacy Check (CRC) on the
		 POS interface
		 crc32bits(1)  - 32 bits
		 crc16bits(2)  - 16 buts"
	DEFVAL		{ crc32bits }
	::= { snPOSInfo2Entry 3 }

snPOSInfo2KeepAlive  OBJECT-TYPE
	SYNTAX		Unsigned32 (0..65535)
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Keep-alive timer for the POS interface in seconds"
	DEFVAL		{ 10 }
	::= { snPOSInfo2Entry 4 }

snPOSInfo2FlagC2  OBJECT-TYPE
	SYNTAX		Unsigned32 (0..255)
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"C2 flag"
	::= { snPOSInfo2Entry 5 }

snPOSInfo2SSM OBJECT-TYPE
	SYNTAX		INTEGER {
		t1SonetPrimaryReferenceSource(1)		,
		t1SonetTraceabilityUnknown(2)			,
		t1SonetStratum2Traceable(3)				,
		t1SonetTransitNodeClock(4)				,
		t1SonetStratum3eTraceable(5)			,
		t1SonetStratum3Traceable(6)				,
		t1SonetMinClockTraceable(7)				,
		t1SonetDus(8)							,
		e1SdhTraceabilityUnknown(9)				,
		e1SdhSsmTransitNodeClockG812(10)		,
		e1SdhDus(11)							,
		e1SdhSsmPrimaryReferenceClockG811(12)	,
		e1SdhSsmLocalG812(13)					,
		e1SdhSsmSyncEquipmentTimingSource(14)
	}
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"The S(ynchronization) S(tatus) M(essage) is sent over
		 the SONET/SDH line to tell the other end about the
		 quality of clock being sent over the line.

		t1SonetPrimaryReferenceSource(1)		- SONET Primary Reference Source
		t1SonetTraceabilityUnknown(2}			- SONET Traceability Unknown
		t1SonetStratum2Traceable(3)				- SONET Stratum 2 Traceable
		t1SonetTransitNodeClock(4)				- SONET Transit Node Clock
		t1SonetStratum3eTraceable(5)			- SONET Stratum 3e Traceable
		t1SonetStratum3Traceable(6)				- SONET Stratum 3 Traceable
		t1SonetMinClockTraceable(7)				- SONET Minimum Clock Traceable
		t1SonetDus(8)							- SONET Do not Use for Synchronization
		e1SdhTraceabilityUnknown(9)				- SDH Traceability Unknown
		e1SdhSsmTransitNodeClockG812(10)		- SDH Transit Node Clock G812
		e1SdhDus(11)							- SDH Do not Use for Synchronization
		e1SdhSsmPrimaryReferenceClockG811(12)	- SDH Primary Reference Clock G811
		e1SdhSsmLocalG812(13)					- SDH Local G812
		e1SdhSsmSyncEquipmentTimingSource(14)	- SDH Synchronization Equipment Timing Source"
	DEFVAL		{ t1SonetTraceabilityUnknown }
	::= { snPOSInfo2Entry 6 }

snPOSInfo2Encapsulation OBJECT-TYPE
	SYNTAX		INTEGER {
		ppp(1),
		hdlc(2)
	}
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Layer 2 encapsulation on the POS interface
		 ppp(1)   - Point to Point Protocol (PPP)
		 hdlc(2)  - Cisco High-level Data Link Control (cHDLC)"
	DEFVAL		{ ppp }
	::= { snPOSInfo2Entry 7 }

snPOSInfo2AlarmMonitoring OBJECT-TYPE
	SYNTAX		INTEGER {
		off(0),
		on(1)
	}
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Alarm Monitoring on POS interface
		 off(0)    - Alarm Monitoring is off
		 on(1)     - Alarm Montioring is on"
	DEFVAL		{ on }
	::= { snPOSInfo2Entry 8 }

snPOSInfo2OverheadJ0ExpectedMessage OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE (1))
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Overhead J0 Expected Message"
	::= { snPOSInfo2Entry 9 }

snPOSInfo2OverheadJ0TransmitMessage OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE (1))
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Overhead J0 Transmit Message"
	::= { snPOSInfo2Entry 10 }

snPOSInfo2OverheadJ1ExpectedMessage OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE (16..64))
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Overhead J1 Expected Message"
	::= { snPOSInfo2Entry 11 }

snPOSInfo2OverheadJ1MessageLength OBJECT-TYPE
	SYNTAX		INTEGER {
		s16 (16),
		s64 (64)
	}
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Overhead J1 Length of Message
		 s16(16)...........16 bytes
		 s64(64)............64 bytes"
	DEFVAL		{ s64 }
	::= { snPOSInfo2Entry 12 }

snPOSInfo2OverheadJ1TransmitMessage OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE (16..64))
	MAX-ACCESS		read-write
	STATUS		current
	DESCRIPTION
		"Overhead J1 Transmit Message"
	::= { snPOSInfo2Entry 13 }

-- POS PPP Group
-- If the L2 encapsulation is PPP, the following will provide
-- information on the states of various control protocols

snPOSPPPTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF SnPOSPPPEntry
	MAX-ACCESS		not-accessible
	STATUS		current
	DESCRIPTION
		"An snPOSPPPTable consists of a number of
		 SnPOSPPPEntry entries"
	::= { snPOSInfo 3 }

snPOSPPPEntry OBJECT-TYPE
	SYNTAX		SnPOSPPPEntry
	MAX-ACCESS		not-accessible
	STATUS		current
	DESCRIPTION
		"An entry in the snPOSPPPTable indicates the
		 PPP control protocol status on a specified port"
	INDEX  {
		ifIndex
	}
	::= { snPOSPPPTable 1 }

SnPOSPPPEntry ::= SEQUENCE {
	snPosPppLcp
		DisplayString,
	snPosPppIpCp
		DisplayString,
	snPosPppIpv6Cp
		DisplayString,
	snPosPppOsInLcp
		DisplayString,
	snPosPppMpLscp
		DisplayString
	}

snPosPppLcp  OBJECT-TYPE
	SYNTAX		DisplayString (SIZE(0..32))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"The PPP Link Control Protocol state"
	::= { snPOSPPPEntry 1 }

snPosPppIpCp  OBJECT-TYPE
	SYNTAX		DisplayString (SIZE(0..32))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"The PPP IP Control Protocol state"
	::= { snPOSPPPEntry 2 }

snPosPppIpv6Cp  OBJECT-TYPE
	SYNTAX		DisplayString (SIZE(0..32))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"The PPP IPv6 Control Protocol state"
	::= { snPOSPPPEntry 3 }

snPosPppOsInLcp  OBJECT-TYPE
	SYNTAX		DisplayString (SIZE(0..32))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"The PPP OSI Network Layer Control Protocol state"
	::= { snPOSPPPEntry 4 }

snPosPppMpLscp  OBJECT-TYPE
	SYNTAX		DisplayString (SIZE(0..32))
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"The PPP MPLS Control Protocol state"
	::= { snPOSPPPEntry 5 }

-- POS cHDLC Group
-- If the L2 encapsulation is cHDLC, the following will provide
-- information various cHDLC paraemters

snPOScHDLCTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF SnPOScHDLCEntry
	MAX-ACCESS		not-accessible
	STATUS		current
	DESCRIPTION
		"An snPOScHDLCTable consists of a number of
		 SnPOScHDLCEntry entries"
	::= { snPOSInfo 4 }

snPOScHDLCEntry OBJECT-TYPE
	SYNTAX		SnPOScHDLCEntry
	MAX-ACCESS		not-accessible
	STATUS		current
	DESCRIPTION
		"An entry in snPOScHDLCEntry shows the
		 cHDLC information on a specified port"
	INDEX {
		ifIndex
	}
	::= { snPOScHDLCTable 1 }

SnPOScHDLCEntry ::= SEQUENCE {
	snPOScHDLCLineState
		INTEGER,
	snPOScHDLCInLoopback
		INTEGER,
	snPOScHDLCMySeq
		Unsigned32,
	snPOScHDLCMySeqSeen
		Unsigned32,
	snPOScHDLCPeerSeqSeen
		Unsigned32,
	snPOScHDLCUniqueSent
		Unsigned32,
	snPOScHDLCUniqueReceived
		Unsigned32
	}

snPOScHDLCLineState  OBJECT-TYPE
	SYNTAX		INTEGER {
		down (0),
		up (1),
		unknown (2)
		}
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"cHDLC Line State"
	::= { snPOScHDLCEntry 1 }

snPOScHDLCInLoopback  OBJECT-TYPE
	SYNTAX		INTEGER {
		no (0),
		yes (1),
		unknown (2)
		}
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"cHDLC in loopback"
	::= { snPOScHDLCEntry 2 }

snPOScHDLCMySeq  OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"cHDLC my sequence number"
	::= { snPOScHDLCEntry 3 }

snPOScHDLCMySeqSeen  OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"cHDLC my sequence number seen"
	::= { snPOScHDLCEntry 4 }

snPOScHDLCPeerSeqSeen  OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"cHDLC peer sequence number seen"
	::= { snPOScHDLCEntry 5 }

snPOScHDLCUniqueSent  OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"cHDLC unique sent"
	::= { snPOScHDLCEntry 6 }

snPOScHDLCUniqueReceived  OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS		read-only
	STATUS		current
	DESCRIPTION
		"cHDLC unique received"
	::= { snPOScHDLCEntry 7 }

END
-- *****************************************************************
-- Commited Access Rate MIB file.
-- *****************************************************************