FOUNDRY-VLAN-CAR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,Gauge32, Counter64,Integer32 FROM SNMPv2-SMI snSwitch FROM FOUNDRY-SN-SWITCH-GROUP-MIB PacketSource, RateLimitType, RateLimitAction FROM FOUNDRY-CAR-MIB; snVLanCAR MODULE-IDENTITY LAST-UPDATED "201006020000Z" -- 04 June 2010 ORGANIZATION "Brocade Communications Systems, Inc." CONTACT-INFO "Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com" DESCRIPTION "Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." REVISION "201006020000Z" -- 04 June 2010 DESCRIPTION "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." REVISION "200909300000Z" -- September 30, 2009 DESCRIPTION "convert from SMIv1 to SMIv2" ::= {snSwitch 17} snVLanCARs OBJECT IDENTIFIER ::= { snVLanCAR 1 } snVLanCARTable OBJECT-TYPE SYNTAX SEQUENCE OF SnVLanCAREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of rate limit configuration entries for a vlan. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied to packets flowing into/out of an interface to regulate network traffic." ::= { snVLanCARs 1 } snVLanCAREntry OBJECT-TYPE SYNTAX SnVLanCAREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of rate-limit configuration objects on this vlan." INDEX { snVLanCARVLanId, snVLanCARDirection, snVLanCARRowIndex } ::= { snVLanCARTable 1 } SnVLanCAREntry ::= SEQUENCE { snVLanCARDirection PacketSource, snVLanCARVLanId INTEGER, snVLanCARRowIndex INTEGER, snVLanCARType RateLimitType, snVLanCARAccIdx Integer32, snVLanCARRate Integer32, snVLanCARLimit Integer32, snVLanCARExtLimit Integer32, snVLanCARConformAction RateLimitAction, snVLanCARExceedAction RateLimitAction, snVLanCARStatSwitchedPkts Counter64, snVLanCARStatSwitchedBytes Counter64, snVLanCARStatFilteredPkts Counter64, snVLanCARStatFilteredBytes Counter64, snVLanCARStatCurBurst Gauge32 } --need to refer to the vlan table --index once it is changed to single --vlan id as the row index snVLanCARVLanId OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID as one of the indices of this table . Each VLAN ID can have a membership of multiple ports." ::= { snVLanCAREntry 1 } snVLanCARDirection OBJECT-TYPE SYNTAX PacketSource MAX-ACCESS read-only STATUS current DESCRIPTION "The input or output transmission direction for the Rate Limit object." ::= { snVLanCAREntry 2 } snVLanCARRowIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted." ::= { snVLanCAREntry 3 } snVLanCARType OBJECT-TYPE SYNTAX RateLimitType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of traffic rate-limited against." ::= { snVLanCAREntry 4 } snVLanCARAccIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index to the access list if RateLimitType is either quickAcc or standardAcc." ::= { snVLanCAREntry 5 } snVLanCARRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The comitted access rate. This determines the long term average transmission rate. Traffic that falls under this rate always conforms. This is average rate in bits per second." ::= { snVLanCAREntry 6 } snVLanCARLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the normal burst size that determines how large traffic bursts can be before some traffic exceeds the rate limit. This specifies the number of bytes that are guaranteed to be transported by the network at the average rate under normal conditions during committed time interval. This normal burst size is in bytes." ::= { snVLanCAREntry 7 } snVLanCARExtLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the extended burst limit that determines how large traffic bursts can be before all the traffic exceeds the rate limit. This burst size is in bytes. " ::= { snVLanCAREntry 8 } snVLanCARConformAction OBJECT-TYPE SYNTAX RateLimitAction MAX-ACCESS read-only STATUS current DESCRIPTION "Action to be taken when the traffic is within the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate limits. precedXmit rewrite the IP precedence and transmit the packet. precedCont rewrite the IP precedence and allow it evaluated by subsequent rate limits." ::= { snVLanCAREntry 9 } snVLanCARExceedAction OBJECT-TYPE SYNTAX RateLimitAction MAX-ACCESS read-only STATUS current DESCRIPTION "Action to be taken when the traffic exceeds the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate limits. precedXmit rewrite the IP precedence and transmit the packet. precedCont rewrite the IP precedence and allow it evaluated by subsequent rate limits." ::= { snVLanCAREntry 10 } snVLanCARStatSwitchedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of packets permitted by this rate limit." ::= { snVLanCAREntry 11 } snVLanCARStatSwitchedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of bytes permitted by this interface." ::= { snVLanCAREntry 12 } snVLanCARStatFilteredPkts OBJECT-TYPE SYNTAX Counter64 --UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of packets which exceeded this rate limit." ::= { snVLanCAREntry 13 } snVLanCARStatFilteredBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of bytes which exceeded this rate limit." ::= { snVLanCAREntry 14 } snVLanCARStatCurBurst OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current received burst size." ::= { snVLanCAREntry 15 } -- end of snVLanCARTable END