CALIX-EOAM-EXT-MIB DEFINITIONS ::= BEGIN


IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE, enterprises, IpAddress, Counter32
      FROM SNMPv2-SMI
   TEXTUAL-CONVENTION, RowStatus, DisplayString, TruthValue, MacAddress, TDomain, TAddress
     FROM SNMPv2-TC
   MODULE-COMPLIANCE, OBJECT-GROUP
     FROM SNMPv2-CONF
   InterfaceIndex, InterfaceIndexOrZero     
   	 FROM IF-MIB        -- [RFC2863]
   VlanIdOrNone, VlanId
     FROM Q-BRIDGE-MIB  -- [RFC4363]
   LldpChassisId, LldpChassisIdSubtype, LldpPortId, LldpPortIdSubtype
     FROM LLDP-MIB      -- [IEEE802.1AB]
   Dot1agCfmPbbComponentIdentifier,
   Dot1agCfmMDLevel, Dot1agCfmCcmInterval, Dot1agCfmMepId, Dot1agCfmIdPermission, Dot1agCfmMepIdOrZero,
   dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, dot1agCfmMepDbRMepIdentifier,
   dot1agCfmLtrSeqNumber, dot1agCfmLtrReceiveOrder,	dot1agCfmMaComponentId, dot1agCfmMaMepListIdentifier,
   Dot1agCfmMpDirection
     FROM IEEE8021-CFM-MIB;

calixEoamExtMIB MODULE-IDENTITY
    LAST-UPDATED "201101240000Z"
    ORGANIZATION "CALIX, Inc"
    CONTACT-INFO
        "Technical Support

		 Calix Networks
		 1035 North McDowell Blvd.
		 Petaluma CA 94954
 		 UNITED STATES
         Tel: +1 707-766-3100

         E-mail:
        "
    DESCRIPTION
      "A MIB module that extends the support of Ethernet OAM standards.
       Extensions are made to IEEE 802.3ah MIB for Link OAM or EFM (Ethernet
       First Mile) functionality, IEEE 802.1ag MIB for Service OAM 
       or CFM (Connection Fault Management) functionality, including 
       ITU-T Y.1731 entities.  This version is compatible with Interport 
       SOAM release 3.0.
      "
    ::= { iso(1) org(3) dod(6)
          internet(1) private(4) enterprises(1) calix (6321) calixMibs (1) 99 }

calixEoamExtConfig OBJECT IDENTIFIER ::= { calixEoamExtMIB 1 }

CalixEoamEnableType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Enable/disable state."
    SYNTAX      INTEGER {
        enable  (1),
        disable (2)
    }

CalixSoamLmType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Single/Dual Frame Loss Measurement Type."
    SYNTAX      INTEGER {
        single  (1),
        dual (2)
    }

-- ******************************************************************
--    ITU-T Y.1731 MEG Object
-- ******************************************************************

calixSoamExtMegTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CalixSoamExtMegEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains all ITU-T Y.1731 MEG entries in the system."
    ::= { calixEoamExtConfig 1 }

calixSoamExtMegEntry OBJECT-TYPE
    SYNTAX      CalixSoamExtMegEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ITU-T Y.1731 MEG entry."
    INDEX { calixSoamExtMegIdentifier }
    ::= { calixSoamExtMegTable 1}

CalixSoamExtMegEntry ::= SEQUENCE {
    calixSoamExtMegIdentifier           Unsigned32,
    calixSoamExtMegName                 OCTET STRING,
    calixSoamExtMegLevel                Dot1agCfmMDLevel,
    calixSoamExtMegCcmInterval          Dot1agCfmCcmInterval,
    calixSoamExtMegVid           		Unsigned32,
    calixSoamExtMegAutoDiscovery        CalixEoamEnableType,
    calixSoamExtMegAutoDiscoveryTimeout Unsigned32,
    calixSoamExtMegCciInterworking      CalixEoamEnableType,
    calixSoamExtMegIdPermission         Dot1agCfmIdPermission,
    calixSoamExtMegRowStatus            RowStatus
    }

calixSoamExtMegIdentifier OBJECT-TYPE
    SYNTAX      Unsigned32(1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Index of the MEG entry in the MEG table. There is a common
         indexing space shared between MAs (IEEE 802.1ag) and MEGs(ITU-T Y.1731).
        "
    ::= { calixSoamExtMegEntry 1 }

calixSoamExtMegName OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(1..44))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Textual name of the MEG."
    ::= { calixSoamExtMegEntry 2 }

calixSoamExtMegLevel OBJECT-TYPE
    SYNTAX      Dot1agCfmMDLevel
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Level for the MEG."
    DEFVAL { 0 }
    ::= { calixSoamExtMegEntry 3 }

calixSoamExtMegCcmInterval OBJECT-TYPE
    SYNTAX      Dot1agCfmCcmInterval
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Interval between CCM transmissions to be used by all MEPs
         in the MEG.
        "
    DEFVAL { interval1s }
    ::= { calixSoamExtMegEntry 4 }

calixSoamExtMegVid OBJECT-TYPE
    SYNTAX       Unsigned32 (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The Primary VLAN ID with which the MEG is
         associated, or 0 if the MEG is not attached to any VID.  If
         the MEG is associated with more than one VID, the
         dot1agCfmVlanTable lists them.
        "
    ::= { calixSoamExtMegEntry 5 }

calixSoamExtMegAutoDiscovery OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies if MEP autodiscovery feature is enabled or not
         for this particular MEG.
        "
    ::= { calixSoamExtMegEntry 6 }

calixSoamExtMegAutoDiscoveryTimeout   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The timeout value for removal of peer MEPs added through autodetection
         if no CCM frames are received from that peer MEP.
        "
    ::= { calixSoamExtMegEntry 7 }

 calixSoamExtMegCciInterworking   OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies if IEEE 802.1ag compatibility mode is enabled on
         this MEG.
        "
    ::= { calixSoamExtMegEntry 8 }

calixSoamExtMegIdPermission OBJECT-TYPE
    SYNTAX      Dot1agCfmIdPermission
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enumerated value indicating what, if anything, is to be
         included in the Sender ID TLV transmitted by MPs
         configured in this MEG. The value sendIdDefer is not allowed.
        "
    DEFVAL { sendIdNone }
    ::= { calixSoamExtMegEntry 9 }

calixSoamExtMegRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of the row.
         This field should be used to create or remove a MEG from the system.
        "
    ::= { calixSoamExtMegEntry 10 }

-- ******************************************************************
-- MIP configuration
-- ******************************************************************

calixSoamExtMipTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF CalixSoamExtMipEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "This table contains all MIPs configured in the system."
    ::=  { calixEoamExtConfig 2 }

calixSoamExtMipEntry OBJECT-TYPE
    SYNTAX         CalixSoamExtMipEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "Each MIP in the system shall have an entry in this table."
    INDEX {  calixSoamExtMegIdentifier,
    		 calixSoamExtMipIdentifier  }
    ::=  { calixSoamExtMipTable 1 }

CalixSoamExtMipEntry ::=  SEQUENCE {
    calixSoamExtMipIdentifier          Unsigned32,
    calixSoamExtMipIfIndex      	   InterfaceIndex,
    calixSoamExtMipAdminState          CalixEoamEnableType,
    calixSoamExtMipMacAddress          MacAddress,
    calixSoamExtMipResetStat           TruthValue,
    calixSoamExtMipRowStatus           RowStatus
    }

calixSoamExtMipIdentifier OBJECT-TYPE
    SYNTAX      Unsigned32(1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique numerical identifier for the MIP."
    ::= { calixSoamExtMipEntry 1 }

calixSoamExtMipIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This attributes specifies the interface index for the port
         on which the MIP is attached.
        "
    ::= { calixSoamExtMipEntry 3 }

calixSoamExtMipAdminState  OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Administrative state of the MIP."
    ::= { calixSoamExtMipEntry 4 }

calixSoamExtMipMacAddress  OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "MAC address of the MIP."
    ::= { calixSoamExtMipEntry 5 }

calixSoamExtMipResetStat OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "True indicates MIPs statistics should be cleared."
    ::= { calixSoamExtMipEntry 6 }

calixSoamExtMipRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of the row.
         This attribute is used to create and delete a MIP in the system.
        "
    ::= { calixSoamExtMipEntry 7 }

-- ******************************************************************
-- MIP statistics
-- ******************************************************************

calixSoamExtMipStatsTable   OBJECT-TYPE
    SYNTAX         SEQUENCE OF CalixSoamExtMipStatsEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "This table contains Stats for all MIPs configured in the system."
    ::=  { calixEoamExtConfig 3 }

calixSoamExtMipStatsEntry OBJECT-TYPE
    SYNTAX         CalixSoamExtMipStatsEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "Stats for a MIP entity."
    INDEX {  calixSoamExtMegIdentifier,
    		 calixSoamExtMipIdentifier  }
    ::=  { calixSoamExtMipStatsTable 1 }

CalixSoamExtMipStatsEntry ::=  SEQUENCE {
	calixSoamExtMipStatsDirection		Dot1agCfmMpDirection,
    calixSoamExtMipStatsLbmIn        	Counter32,
    calixSoamExtMipStatsLbrOut      	Counter32,
    calixSoamExtMipStatsLtmIn        	Counter32,
    calixSoamExtMipStatsLtmForwarded 	Counter32,
    calixSoamExtMipStatsLtrOut       	Counter32,
    calixSoamExtMipStatsLbmInvalidSenderId	Counter32,
    calixSoamExtMipStatsDiscards		Counter32,
    calixSoamExtMipStatsResetStat		TruthValue
    }

calixSoamExtMipStatsDirection OBJECT-TYPE
    SYNTAX      Dot1agCfmMpDirection
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The direction in which the MHF faces for statistics."
    ::= { calixSoamExtMipStatsEntry 1 }

calixSoamExtMipStatsLbmIn OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of LBMs received by this MIP."
    ::= { calixSoamExtMipStatsEntry 2 }

calixSoamExtMipStatsLbrOut OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of LBRs sent by this MIP."
    ::= { calixSoamExtMipStatsEntry 3 }

calixSoamExtMipStatsLtmIn OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of LTMs received by this MIP."
    ::= { calixSoamExtMipStatsEntry 4 }

calixSoamExtMipStatsLtmForwarded OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of LTM messages forwarded by MIP."
    ::= { calixSoamExtMipStatsEntry 5 }

calixSoamExtMipStatsLtrOut OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of LTR responses sent by this MIP."
    ::= { calixSoamExtMipStatsEntry 6 }

calixSoamExtMipStatsLbmInvalidSenderId
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of received LBM with a bad Sender ID.
        "
    ::= { calixSoamExtMipStatsEntry 7 }

calixSoamExtMipStatsDiscards
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of discarded OAM frames.
        "
    ::= { calixSoamExtMipStatsEntry 8 }

calixSoamExtMipStatsResetStat OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "True indicates MEP statistics should be cleared."
    ::= { calixSoamExtMipStatsEntry 9 }


-- ******************************************************************
--    MEP extension for Delay Measurement and DVM
-- ******************************************************************

calixSoamExtMepDmExtTable   OBJECT-TYPE
    SYNTAX         SEQUENCE OF CalixSoamExtMepDmExtEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "This table contains extended attributes and counters for the standard
         MEP table dot1agCfmMepTable, in order to support Delay Measurement and
         Delay Variation Measurment functionality.
        "
    ::=  { calixEoamExtConfig 4 }

calixSoamExtMepDmExtEntry OBJECT-TYPE
    SYNTAX         CalixSoamExtMepDmExtEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "MEP Extension (DM and DVM) table for a given MEP object."
    INDEX { dot1agCfmMdIndex,
            dot1agCfmMaIndex,
            dot1agCfmMepIdentifier }
    ::=  { calixSoamExtMepDmExtTable   1 }

CalixSoamExtMepDmExtEntry ::=  SEQUENCE {
	calixSoamExtMepDmExtActive						CalixEoamEnableType,
    calixSoamExtMepDmExtDestMacAddress              MacAddress,
    calixSoamExtMepDmExtDestMepId                   Dot1agCfmMepIdOrZero,
    calixSoamExtMepDmExtDestIsMepId                 TruthValue,
    calixSoamExtMepDmExtClassOfService              Unsigned32,
    calixSoamExtMepDmExtDmPeriod                    INTEGER,
    calixSoamExtMepDmExtMaxRtdThrSet  				Unsigned32,
    calixSoamExtMepDmExtMaxRtdThrClr				Unsigned32,
    calixSoamExtMepDmExtAvgRtdThrSet  				Unsigned32,
    calixSoamExtMepDmExtAvgRtdThrClr				Unsigned32,
    calixSoamExtMepDmExtMaxRtdVarThrSet  			Unsigned32,
    calixSoamExtMepDmExtMaxRtdVarThrClr				Unsigned32,
    calixSoamExtMepDmExtAvgRtdVarThrSet  			Unsigned32,
    calixSoamExtMepDmExtAvgRtdVarThrClr				Unsigned32,
    calixSoamExtMepDmExtAvgRoundTripDelay           Unsigned32,
    calixSoamExtMepDmExtMinRoundTripDelay           Unsigned32,
    calixSoamExtMepDmExtMaxRoundTripDelay           Unsigned32,
    calixSoamExtMepDmExtAvgRoundTripDelayVariation  Unsigned32,
    calixSoamExtMepDmExtMinRoundTripDelayVariation  Unsigned32,
    calixSoamExtMepDmExtMaxRoundTripDelayVariation  Unsigned32,
    calixSoamExtMepDmExtAvgRoundTripProcessingDelay Unsigned32,
    calixSoamExtMepDmExtMinRoundTripProcessingDelay Unsigned32,
    calixSoamExtMepDmExtMaxRoundTripProcessingDelay Unsigned32,
    calixSoamExtMepDmExtDataLength					Unsigned32,
    calixSoamExtMepDmExtDataPattern					Unsigned32
    }

calixSoamExtMepDmExtActive OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Use to enable delay measurement."
    ::= { calixSoamExtMepDmExtEntry 1 }
    
calixSoamExtMepDmExtDestMacAddress    OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The Target MAC Address field to be transmitted: A unicast
         destination MAC address.
         This address will be used if the value of the column
         calixSoamExtMepDmExtDestIsMepId is 'False'.
        "
    ::= { calixSoamExtMepDmExtEntry  2 }

calixSoamExtMepDmExtDestMepId    OBJECT-TYPE
    SYNTAX      Dot1agCfmMepIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The MEP ID of remote MEP to which the DM is to be sent.
         This address will be used if the value of the column
         calixSoamExtMepDmExtDestIsMepId is 'True'.
        "
    ::= { calixSoamExtMepDmExtEntry  3 }

calixSoamExtMepDmExtDestIsMepId    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "True indicates that MEP ID of the target MEP is used for
         DM transmission.
         False indicates that unicast destination MAC address of the
         target MEP is used for DM transmission.
        "
    ::= { calixSoamExtMepDmExtEntry  4 }

calixSoamExtMepDmExtClassOfService OBJECT-TYPE
    SYNTAX      Unsigned32(0..8)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the class of service for which the DMM is requested.
         A value of 8 indicates a full MEP level (CoS agnostic) request.
        "
    ::= { calixSoamExtMepDmExtEntry  5 }

calixSoamExtMepDmExtDmPeriod    OBJECT-TYPE
    SYNTAX      INTEGER {
        dm1sec(3),
        dm10sec(4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the delay between two consecutive DM messages."
    ::= { calixSoamExtMepDmExtEntry   6 }

	calixSoamExtMepDmExtMaxRtdThrSet    OBJECT-TYPE
    SYNTAX      Unsigned32(0..100000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum round trip delay threshold upon which an alarm is to be raised.
        "
    ::= { calixSoamExtMepDmExtEntry   7 }

	calixSoamExtMepDmExtMaxRtdThrClr    OBJECT-TYPE
    SYNTAX      Unsigned32(0..100000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum round trip delay threshold upon which an alarm is to be cleared.
        "
    ::= { calixSoamExtMepDmExtEntry   8 }

	calixSoamExtMepDmExtAvgRtdThrSet    OBJECT-TYPE
    SYNTAX      Unsigned32(0..100000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The average round trip delay threshold upon which an alarm is to be raised.
        "
    ::= { calixSoamExtMepDmExtEntry   9 }

	calixSoamExtMepDmExtAvgRtdThrClr    OBJECT-TYPE
    SYNTAX      Unsigned32(0..100000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The average round trip delay threshold upon which an alarm is to be cleared.
        "
    ::= { calixSoamExtMepDmExtEntry   10 }

	calixSoamExtMepDmExtMaxRtdVarThrSet    OBJECT-TYPE
    SYNTAX      Unsigned32(0..100000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum round trip delay variation threshold upon which an alarm is to be raised.
        "
    ::= { calixSoamExtMepDmExtEntry   11 }

	calixSoamExtMepDmExtMaxRtdVarThrClr    OBJECT-TYPE
    SYNTAX      Unsigned32(0..100000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum round trip delay variation threshold upon which an alarm is to be cleared.
        "
    ::= { calixSoamExtMepDmExtEntry   12 }

	calixSoamExtMepDmExtAvgRtdVarThrSet    OBJECT-TYPE
    SYNTAX      Unsigned32(0..100000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The average round trip delay variation threshold upon which an alarm is to be raised.
        "
    ::= { calixSoamExtMepDmExtEntry   13 }

	calixSoamExtMepDmExtAvgRtdVarThrClr    OBJECT-TYPE
    SYNTAX      Unsigned32(0..100000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The average round trip delay variation threshold upon which an alarm is to be cleared.
        "
    ::= { calixSoamExtMepDmExtEntry   14 }

calixSoamExtMepDmExtAvgRoundTripDelay    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The average round trip delay for the session, expressed in 1/100th of
         miliseconds.
        "
    ::= { calixSoamExtMepDmExtEntry   15 }

calixSoamExtMepDmExtMinRoundTripDelay    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum round trip delay for the session, expressed in 1/100th of
         miliseconds."
    ::= { calixSoamExtMepDmExtEntry   16 }

calixSoamExtMepDmExtMaxRoundTripDelay    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum round trip delay for the session, expressed in 1/100th of
         miliseconds.
        "
    ::= { calixSoamExtMepDmExtEntry   17 }

calixSoamExtMepDmExtAvgRoundTripDelayVariation    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The average round trip delay variation for the session,
         expressed in 1/100th of miliseconds."
    ::= { calixSoamExtMepDmExtEntry   18 }

calixSoamExtMepDmExtMinRoundTripDelayVariation    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum round trip delay variation for the session,
         expressed in 1/100th of miliseconds."
    ::= { calixSoamExtMepDmExtEntry   19 }

calixSoamExtMepDmExtMaxRoundTripDelayVariation    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum round trip delay variation for the session,
         expressed in 1/100th of miliseconds."
    ::= { calixSoamExtMepDmExtEntry   20 }

calixSoamExtMepDmExtAvgRoundTripProcessingDelay    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The average processing delay for the session,
         expressed in 1/100th of miliseconds.
        "
    ::= { calixSoamExtMepDmExtEntry   21 }

calixSoamExtMepDmExtMinRoundTripProcessingDelay    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum round trip delay variation for the session,
         expressed in 1/100th of miliseconds.
        "
    ::= { calixSoamExtMepDmExtEntry   22 }

calixSoamExtMepDmExtMaxRoundTripProcessingDelay    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum round trip delay variation for the session,
         expressed in 1/100th of miliseconds.
        "
    ::= { calixSoamExtMepDmExtEntry   23}

calixSoamExtMepDmExtDataLength    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Length of data TLV in delay measurement frame.
        "
    ::= { calixSoamExtMepDmExtEntry   24 }

calixSoamExtMepDmExtDataPattern    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Data pattern copied into data TLV.
        "
    ::= { calixSoamExtMepDmExtEntry   25 }


-- ******************************************************************
--    MEP extension for Frame Loss Measurement
-- ******************************************************************

calixSoamExtMepLmExtTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF CalixSoamExtMepLmExtEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "This table contains extended attributes and counters for the standard
         MEP table dot1agCfmMepTable, in order to support FLM on demand functionality.
        "
    ::=  { calixEoamExtConfig 5 }

calixSoamExtMepLmExtEntry OBJECT-TYPE
    SYNTAX         CalixSoamExtMepLmExtEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "MEP Extension (FLM) table for a given MEP object"
    INDEX { dot1agCfmMdIndex,
            dot1agCfmMaIndex,
            dot1agCfmMepIdentifier }
    ::=  { calixSoamExtMepLmExtTable   1 }

CalixSoamExtMepLmExtEntry   ::=  SEQUENCE {
	calixSoamExtMepLmExtActive				  CalixEoamEnableType,
    calixSoamExtMepLmExtDestMacAddress        MacAddress,
    calixSoamExtMepLmExtDestMepId             Dot1agCfmMepIdOrZero,
    calixSoamExtMepLmExtDestIsMepId           TruthValue,
    calixSoamExtMepLmExtLmType			      CalixSoamLmType,
    calixSoamExtMepLmExtClassOfService        Unsigned32,
    calixSoamExtMepLmExtLmPeriod              INTEGER,
    calixSoamExtMepLmExtMaxNearEndLossThrSet  Unsigned32,
    calixSoamExtMepLmExtMaxNearEndLossThrClr  Unsigned32,
    calixSoamExtMepLmExtAvgNearEndLossThrSet  Unsigned32,
    calixSoamExtMepLmExtAvgNearEndLossThrClr  Unsigned32,
    calixSoamExtMepLmExtMaxFarEndLossThrSet   Unsigned32,
    calixSoamExtMepLmExtMaxFarEndLossThrClr   Unsigned32,
    calixSoamExtMepLmExtAvgFarEndLossThrSet   Unsigned32,
    calixSoamExtMepLmExtAvgFarEndLossThrClr   Unsigned32,
    calixSoamExtMepLmExtNearEndLostPkts       Counter32,
    calixSoamExtMepLmExtNearEndLossRatio      Unsigned32,
    calixSoamExtMepLmExtMaxNearEndLossRatio   Unsigned32,
    calixSoamExtMepLmExtMinNearEndLossRatio   Unsigned32,
    calixSoamExtMepLmExtAvgNearEndLossRatio   Unsigned32,
    calixSoamExtMepLmExtFarEndLostPkts   	  Counter32,
    calixSoamExtMepLmExtFarEndLossRatio       Unsigned32,
    calixSoamExtMepLmExtMaxFarEndLossRatio    Unsigned32,
    calixSoamExtMepLmExtMinFarEndLossRatio    Unsigned32,
    calixSoamExtMepLmExtAvgFarEndLossRatio    Unsigned32
    }

calixSoamExtMepLmExtActive OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Use to enable frame delay measurement."
    ::= { calixSoamExtMepLmExtEntry 1 }
    
calixSoamExtMepLmExtDestMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The Target MAC Address Field to be transmitted: A unicast
         destination MAC address.
         This address will be used if the value of the column
         calixSoamExtMepLmExtDestIsMepId is 'False'.
        "
    ::= { calixSoamExtMepLmExtEntry 2 }

calixSoamExtMepLmExtDestMepId OBJECT-TYPE
    SYNTAX      Dot1agCfmMepIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The MEP ID of remote MEP to which the FLM is to be sent.
         This address will be used if the value of the column
         calixSoamExtMepLmExtDestIsMepId is 'True'.
        "
    ::= { calixSoamExtMepLmExtEntry 3 }

calixSoamExtMepLmExtDestIsMepId OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "True indicates that MEPID is used for FLM transmission.
         False indicates that unicast destination MAC address is used for FLM transmission.
        "
    ::= { calixSoamExtMepLmExtEntry 4}

calixSoamExtMepLmExtLmType OBJECT-TYPE
    SYNTAX      CalixSoamLmType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the type of Frame Loss Measurement: Single or Dual.
        "
    ::= { calixSoamExtMepLmExtEntry  5 }

calixSoamExtMepLmExtClassOfService OBJECT-TYPE
    SYNTAX      Unsigned32(0..8)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the class of service for which the FLM is requested.
         A value of 8 indicates a full MEP level (CoS agnostic) request.
        "
    ::= { calixSoamExtMepLmExtEntry  6 }

calixSoamExtMepLmExtLmPeriod OBJECT-TYPE
    SYNTAX INTEGER {
              lm100ms(1),
              lm1sec(2),
              lm10sec(3)
              }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the delay between two consecutive FLM messages"
    ::= { calixSoamExtMepLmExtEntry   7 }


	calixSoamExtMepLmExtMaxNearEndLossThrSet    OBJECT-TYPE
    SYNTAX      Unsigned32(0..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum near end frame loss threshold upon which an alarm is to be raised.
        "
    ::= { calixSoamExtMepLmExtEntry   8 }

	calixSoamExtMepLmExtMaxNearEndLossThrClr    OBJECT-TYPE
    SYNTAX      Unsigned32(0..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum near end frame loss threshold upon which an alarm is to be cleared.
        "
    ::= { calixSoamExtMepLmExtEntry   9 }

	calixSoamExtMepLmExtAvgNearEndLossThrSet    OBJECT-TYPE
    SYNTAX      Unsigned32(0..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The average near end frame loss threshold upon which an alarm is to be raised.
        "
    ::= { calixSoamExtMepLmExtEntry   10 }

	calixSoamExtMepLmExtAvgNearEndLossThrClr    OBJECT-TYPE
    SYNTAX      Unsigned32(0..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The average near end frame loss threshold upon which an alarm is to be cleared.
        "
    ::= { calixSoamExtMepLmExtEntry   11 }

	calixSoamExtMepLmExtMaxFarEndLossThrSet    OBJECT-TYPE
    SYNTAX      Unsigned32(0..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum far end loss threshold upon which an alarm is to be raised.
        "
    ::= { calixSoamExtMepLmExtEntry   12 }

	calixSoamExtMepLmExtMaxFarEndLossThrClr    OBJECT-TYPE
    SYNTAX      Unsigned32(0..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum far end loss threshold upon which an alarm is to be cleared.
        "
    ::= { calixSoamExtMepLmExtEntry   13 }

	calixSoamExtMepLmExtAvgFarEndLossThrSet    OBJECT-TYPE
    SYNTAX      Unsigned32(0..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The average far end loss threshold upon which an alarm is to be raised.
        "
    ::= { calixSoamExtMepLmExtEntry   14 }

	calixSoamExtMepLmExtAvgFarEndLossThrClr    OBJECT-TYPE
    SYNTAX      Unsigned32(0..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The average far end loss threshold upon which an alarm is to be cleared.
        "
    ::= { calixSoamExtMepLmExtEntry   15 }

calixSoamExtMepLmExtNearEndLostPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of frames lost at the near end."
    ::= { calixSoamExtMepLmExtEntry   16 }

calixSoamExtMepLmExtNearEndLossRatio OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Frame loss ratio at near end, in 1/1000000th of percentage points.
         A value of 10000 means 1% loss ratio.
        "
    ::= { calixSoamExtMepLmExtEntry   17 }

calixSoamExtMepLmExtMaxNearEndLossRatio OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximum frame loss ratio at near end, in 1/1000000th of percentage 
         points. A value of 10000 means 1% loss ratio.
        "
    ::= { calixSoamExtMepLmExtEntry   18 }

calixSoamExtMepLmExtMinNearEndLossRatio OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Minimum frame loss ratio at near end, in 1/1000000th of percentage 
         points. A value of 10000 means 1% loss ratio.
        "
    ::= { calixSoamExtMepLmExtEntry   19 }

calixSoamExtMepLmExtAvgNearEndLossRatio OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Average frame loss ratio at near end, in 1/1000000th of percentage 
         points. A value of 10000 means 1% loss ratio.
        "
    ::= { calixSoamExtMepLmExtEntry   20 }

calixSoamExtMepLmExtFarEndLostPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of frames lost at the far end."
    ::= { calixSoamExtMepLmExtEntry   21 }

calixSoamExtMepLmExtFarEndLossRatio OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Frame loss ratio at far end, in 1/1000000th of percentage points.
         A value of 10000 means 1% loss ratio.
        "
    ::= { calixSoamExtMepLmExtEntry   22 }

calixSoamExtMepLmExtMaxFarEndLossRatio OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximum frame loss ratio at far end, in 1/1000000th of percentage 
         points. A value of 10000 means 1% loss ratio.
        "
    ::= { calixSoamExtMepLmExtEntry   23 }

calixSoamExtMepLmExtMinFarEndLossRatio OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Minimum frame loss ratio at far end, in 1/1000000th of percentage 
         points. A value of 10000 means 1% loss ratio.
        "
    ::= { calixSoamExtMepLmExtEntry   24 }

calixSoamExtMepLmExtAvgFarEndLossRatio OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Average frame loss ratio at far end, in 1/1000000th of percentage 
         points. A value of 10000 means 1% loss ratio.
        "
    ::= { calixSoamExtMepLmExtEntry   25 }


-- ******************************************************************
--    MEP extension for Multicast Loopback
-- ******************************************************************

calixSoamExtMepMcastLoopbackSessionTable   OBJECT-TYPE
    SYNTAX         SEQUENCE OF CalixSoamExtMepMcastLoopbackSessionEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "This table is used to initiate a multicast loopback request for 
        a given MEP.
        "
    ::=  { calixEoamExtConfig 6 }

calixSoamExtMepMcastLoopbackSessionEntry  OBJECT-TYPE
    SYNTAX         CalixSoamExtMepMcastLoopbackSessionEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "Each MEP can have only one active Multicast Loopback Request
         at a given time.
        "
    INDEX { dot1agCfmMdIndex,
            dot1agCfmMaIndex,
            dot1agCfmMepIdentifier }
    ::=  { calixSoamExtMepMcastLoopbackSessionTable 1 }

CalixSoamExtMepMcastLoopbackSessionEntry ::= SEQUENCE {
    calixSoamExtMepMcastLoopbackSessionStatus      INTEGER,
    calixSoamExtMepMcastLoopbackSessionReplies     Unsigned32
    }

calixSoamExtMepMcastLoopbackSessionStatus OBJECT-TYPE
    SYNTAX      INTEGER {
        none(1),
        inProgress(2),
        completed(3),
        activate(4),
        failed(5)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the status of the Multicast Loopback request
         for the particular ITU-T Y.1731 MEP. In order to activate a new
         session, write 'activate' in this variable.
        "
    ::= { calixSoamExtMepMcastLoopbackSessionEntry 1 }

calixSoamExtMepMcastLoopbackSessionReplies OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of replies received for this multicast loopback
         session.
        "
    ::= { calixSoamExtMepMcastLoopbackSessionEntry 2 }

-- ******************************************************************
--  Multicast Loopback Results table
-- ******************************************************************

calixSoamExtMepMcastLoopbackResultsTable   OBJECT-TYPE
    SYNTAX         SEQUENCE OF CalixSoamExtMepMcastLoopbackResultsEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "This table is used to read the results of a multicast
         loopback request for a given MEP.
        "
    ::=  { calixEoamExtConfig 7 }

calixSoamExtMepMcastLoopbackResultsEntry  OBJECT-TYPE
    SYNTAX         CalixSoamExtMepMcastLoopbackResultsEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "Each MEP can have only one active Multicast Loopback Request
         at a given time. This table presents the results of the last request
         indexed by the reply order.
        "
    INDEX { dot1agCfmMdIndex,
            dot1agCfmMaIndex,
            dot1agCfmMepIdentifier,
            calixSoamExtMepMcastLoopbackResultsIndex }
    ::=  { calixSoamExtMepMcastLoopbackResultsTable 1 }

CalixSoamExtMepMcastLoopbackResultsEntry ::= SEQUENCE {
    calixSoamExtMepMcastLoopbackResultsIndex      Unsigned32,
    calixSoamExtMepMcastLoopbackResultsMacAddress MacAddress
    }

calixSoamExtMepMcastLoopbackResultsIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Specifies the index of the multicast loopback result."
    ::= { calixSoamExtMepMcastLoopbackResultsEntry 1 }

calixSoamExtMepMcastLoopbackResultsMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "MAC address for the received reply."
    ::= { calixSoamExtMepMcastLoopbackResultsEntry 2 }

-- ******************************************************************
--  MEP extension for Statistics
-- ******************************************************************

calixSoamExtMepStatsExtTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CalixSoamExtMepStatsExtEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains extensions of the dot1agCfmMepTable for MEP Statistics."
    ::= { calixEoamExtConfig 8 }

calixSoamExtMepStatsExtEntry OBJECT-TYPE
    SYNTAX      CalixSoamExtMepStatsExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Extended counters and attributes for MEP configuration."
    INDEX { dot1agCfmMdIndex,
            dot1agCfmMaIndex,
            dot1agCfmMepIdentifier
          }
    ::= { calixSoamExtMepStatsExtTable 1}

CalixSoamExtMepStatsExtEntry ::= SEQUENCE {
    calixSoamExtMepStatsExtCcmRdiSent           Counter32,
    calixSoamExtMepStatsExtCcmReceived          Counter32,
    calixSoamExtMepStatsExtCcmInvalidSenderId   Counter32,
    calixSoamExtMepStatsExtCcmInvalidPortStatus Counter32,
    calixSoamExtMepStatsExtCcmInvalidIfStatus   Counter32,
    calixSoamExtMepStatsExtCcmRdiReceived       Counter32,
    calixSoamExtMepStatsExtLbmReceived		  	Counter32,
    calixSoamExtMepStatsExtLbmSent			  	Counter32,
    calixSoamExtMepStatsExtLbmInvalidSenderId   Counter32,
    calixSoamExtMepStatsExtLbrInvalidSenderId   Counter32,
    calixSoamExtMepStatsExtLtmReceived		  	Counter32,
    calixSoamExtMepStatsExtLtmSent			  	Counter32,
    calixSoamExtMepStatsExtLtrInvalidMac		Counter32,
    calixSoamExtMepStatsExtLtrReceived		  	Counter32,
    calixSoamExtMepStatsExtLtrSent			  	Counter32,
    calixSoamExtMepStatsExtLmmReceived		  	Counter32,
    calixSoamExtMepStatsExtLmmSent			  	Counter32,
    calixSoamExtMepStatsExtLmrReceived		  	Counter32,
    calixSoamExtMepStatsExtLmrSent			 	Counter32,
    calixSoamExtMepStatsExtDmmReceived		  	Counter32,
    calixSoamExtMepStatsExtDmmSent			  	Counter32,
    calixSoamExtMepStatsExtDmrReceived		  	Counter32,
    calixSoamExtMepStatsExtDmrSent			  	Counter32,
    calixSoamExtMepStatsExtResetStat			TruthValue
    }

calixSoamExtMepStatsExtCcmRdiSent
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of sent CCMs with RDI bit set."
    ::= { calixSoamExtMepStatsExtEntry 1 }

calixSoamExtMepStatsExtCcmReceived
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of CCMs received from all remote MEPs."
    ::= { calixSoamExtMepStatsExtEntry 2 }

calixSoamExtMepStatsExtCcmInvalidSenderId
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of CCMs with invalid Sender ID TLV received from all
         remote MEPs.
        "
    ::= { calixSoamExtMepStatsExtEntry 3 }

calixSoamExtMepStatsExtCcmInvalidPortStatus
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of CCMs with invalid Port Status TLV received from all
         remote MEPs.
        "
    ::= { calixSoamExtMepStatsExtEntry 4 }

calixSoamExtMepStatsExtCcmInvalidIfStatus
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of CCMs with invalid Interface Status TLV received from all
         remote MEPs.
        "
    ::= { calixSoamExtMepStatsExtEntry 5 }

calixSoamExtMepStatsExtCcmRdiReceived
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of CCMs with RDI bit set received from all
         remote MEPs.
        "
    ::= { calixSoamExtMepStatsExtEntry 6 }

calixSoamExtMepStatsExtLbmReceived
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LBM messages received.
        "
    ::= { calixSoamExtMepStatsExtEntry 7 }

calixSoamExtMepStatsExtLbmSent
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LBM messages sent.
        "
    ::= { calixSoamExtMepStatsExtEntry 8 }


calixSoamExtMepStatsExtLbmInvalidSenderId
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LBM messages received with
         a bad sender ID.
        "
    ::= { calixSoamExtMepStatsExtEntry 9 }


calixSoamExtMepStatsExtLbrInvalidSenderId
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LBR messages received with
         a bad sender ID.
        "
    ::= { calixSoamExtMepStatsExtEntry 10 }


calixSoamExtMepStatsExtLtmReceived
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LTM messages received.
        "
    ::= { calixSoamExtMepStatsExtEntry 11 }


calixSoamExtMepStatsExtLtmSent
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LTM messages sent.
        "
    ::= { calixSoamExtMepStatsExtEntry 12 }


calixSoamExtMepStatsExtLtrInvalidMac
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LTR messages received with
         a bad MAC address.
        "
    ::= { calixSoamExtMepStatsExtEntry 13 }


calixSoamExtMepStatsExtLtrReceived
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LTR messages received.
        "
    ::= { calixSoamExtMepStatsExtEntry 14 }


calixSoamExtMepStatsExtLtrSent
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LTR messages sent.
        "
    ::= { calixSoamExtMepStatsExtEntry 15 }


calixSoamExtMepStatsExtLmmReceived
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LMM messages received.
        "
    ::= { calixSoamExtMepStatsExtEntry 16 }


calixSoamExtMepStatsExtLmmSent
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LMM messages sent.
        "
    ::= { calixSoamExtMepStatsExtEntry 17 }

calixSoamExtMepStatsExtLmrReceived
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LMR messages received.
        "
    ::= { calixSoamExtMepStatsExtEntry 18 }


calixSoamExtMepStatsExtLmrSent
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of LMR messages sent.
        "
    ::= { calixSoamExtMepStatsExtEntry 19 }

calixSoamExtMepStatsExtDmmReceived
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of DMM messages received.
        "
    ::= { calixSoamExtMepStatsExtEntry 20 }


calixSoamExtMepStatsExtDmmSent
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of DMM messages sent.
        "
    ::= { calixSoamExtMepStatsExtEntry 21 }

calixSoamExtMepStatsExtDmrReceived
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of DMR messages received.
        "
    ::= { calixSoamExtMepStatsExtEntry 22 }


calixSoamExtMepStatsExtDmrSent
    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of DMR messages sent.
        "
    ::= { calixSoamExtMepStatsExtEntry 23 }

calixSoamExtMepStatsExtResetStat OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "True indicates MEP statistics should be cleared."
    ::= { calixSoamExtMepStatsExtEntry 24 }


-- ******************************************************************
-- MEP Extension for Unicast Loopback Result Table
-- ******************************************************************

calixSoamExtMepUcastLoopbackResultsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CalixSoamExtMepUcastLoopbackResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains Unicast Loopback protocol results for corresponding MEP."
    ::= { calixEoamExtConfig 9 }

calixSoamExtMepUcastLoopbackResultsEntry OBJECT-TYPE
    SYNTAX      CalixSoamExtMepUcastLoopbackResultsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unicast Loopback result for corresponding MEP."
    INDEX { dot1agCfmMdIndex,
            dot1agCfmMaIndex,
            dot1agCfmMepIdentifier
          }
    ::= { calixSoamExtMepUcastLoopbackResultsTable 1}

CalixSoamExtMepUcastLoopbackResultsEntry ::= SEQUENCE {
    calixSoamExtMepUcastLoopbackResultsLbmFirstSeqNumber Unsigned32,
    calixSoamExtMepUcastLoopbackResultsDestMacAddress    MacAddress,
    calixSoamExtMepUcastLoopbackResultsStatus            INTEGER,
    calixSoamExtMepUcastLoopbackResultsLbmOut            Counter32,
    calixSoamExtMepUcastLoopbackResultsLbrIn             Counter32
    }

calixSoamExtMepUcastLoopbackResultsLbmFirstSeqNumber OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Loopback Transaction Identifier of the first LBM sent. This value can be obtained
         from dot1agCfmMepTransmitLbmSeqNumber of dot1agCfmMepTable table after Loopback transmitting.
        "
    ::= { calixSoamExtMepUcastLoopbackResultsEntry 1 }

calixSoamExtMepUcastLoopbackResultsDestMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC Address of destination MP."
    ::= { calixSoamExtMepUcastLoopbackResultsEntry 2 }

calixSoamExtMepUcastLoopbackResultsStatus OBJECT-TYPE
    SYNTAX      INTEGER {
      none(0),
      inProgress(1),
      failed(2),
      succeeded(3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies the state of the current Loopback request."
    ::= { calixSoamExtMepUcastLoopbackResultsEntry 3 }

calixSoamExtMepUcastLoopbackResultsLbmOut OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Loopback Messages sent."
    ::= { calixSoamExtMepUcastLoopbackResultsEntry 4 }

calixSoamExtMepUcastLoopbackResultsLbrIn OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Loopback replies received."
    ::= { calixSoamExtMepUcastLoopbackResultsEntry 5 }

-- ******************************************************************
-- System Level MIB extensions for SOAM
-- ******************************************************************

-- ******************************************************************
-- SOAM Configration Extension 
-- ******************************************************************

calixSoamExtCfgTable OBJECT-TYPE
    SYNTAX 		SEQUENCE  OF  CalixSoamExtCfgEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains Unicast Loopback protocol results for corresponding MEP."
    ::= { calixEoamExtConfig 10 }

calixSoamExtCfgEntry OBJECT-TYPE
    SYNTAX      CalixSoamExtCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "General Service OAM Configuration Table."
    INDEX { calixSoamExtCfgIndex
          }
    ::= { calixSoamExtCfgTable 1}

CalixSoamExtCfgEntry ::= SEQUENCE {
	calixSoamExtCfgIndex				Unsigned32, 
    calixSoamExtCfgAdminState			CalixEoamEnableType,
    calixSoamExtCfgPermission			Dot1agCfmIdPermission,
    calixSoamExtCfgChassisIdSubtype     LldpChassisIdSubtype,
    calixSoamExtCfgChassisId			LldpChassisId,
    calixSoamExtCfgManAddressDomain     TDomain,
    calixSoamExtCfgManAddress         	TAddress,
    calixSoamExtCfgCcmOptTlvSenderId	CalixEoamEnableType,
    calixSoamExtCfgCcmOptTlvPortStatus	CalixEoamEnableType,
    calixSoamExtCfgCcmOptTlvIfStatus	CalixEoamEnableType,
    calixSoamExtCfgLtmOptTlvSenderId	CalixEoamEnableType,
    calixSoamExtCfgLbmOptTlvSenderId	CalixEoamEnableType,
    calixSoamExtCfgLbmOptTlvIfStatus	CalixEoamEnableType,
    calixSoamExtCfgLbmOptTlvData		CalixEoamEnableType,
    calixSoamExtCfgDmmOptTlvData		CalixEoamEnableType
    }

calixSoamExtCfgIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Index of auto instantited configuration MIB.  Must be 1.
        "
    ::= { calixSoamExtCfgEntry 1 }


calixSoamExtCfgAdminState OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "State of Service level Ethernet OAM.  Set this to enable to begin transmitting Ethernet OAM
         frames from configures MEG/MEPs.
        "
    ::= { calixSoamExtCfgEntry 2 }

calixSoamExtCfgPermission OBJECT-TYPE
    SYNTAX      Dot1agCfmIdPermission
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Default permission level determining which optional TLVs to include.
        "
    ::= { calixSoamExtCfgEntry 3 }

calixSoamExtCfgChassisIdSubtype OBJECT-TYPE
    SYNTAX      LldpChassisIdSubtype
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Chassis ID Subtype.
        "
    ::= { calixSoamExtCfgEntry 4 }

calixSoamExtCfgChassisId OBJECT-TYPE
    SYNTAX      LldpChassisId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Chassis ID.
        "
    ::= { calixSoamExtCfgEntry 5 }

calixSoamExtCfgManAddressDomain OBJECT-TYPE
    SYNTAX      TDomain
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Management Domain.
        "
    ::= { calixSoamExtCfgEntry 6 }

calixSoamExtCfgManAddress OBJECT-TYPE
    SYNTAX      TAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Management Address.
        "
    ::= { calixSoamExtCfgEntry 7 }

calixSoamExtCfgCcmOptTlvSenderId OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable to include sender ID TLV in CCM messages.
        "
    ::= { calixSoamExtCfgEntry 8 }

calixSoamExtCfgCcmOptTlvPortStatus OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable to include Port Status TLV in CCM messages.
        "
    ::= { calixSoamExtCfgEntry 9 }

calixSoamExtCfgCcmOptTlvIfStatus OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable to include Interface Status TLV in CCM messages.
        "
    ::= { calixSoamExtCfgEntry 10 }

calixSoamExtCfgLtmOptTlvSenderId OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable to include Sender ID TLV in LTM messages.
        "
    ::= { calixSoamExtCfgEntry 11 }

calixSoamExtCfgLbmOptTlvSenderId OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable to include Sender ID TLV in LBM messages.
        "
    ::= { calixSoamExtCfgEntry 12 }

calixSoamExtCfgLbmOptTlvIfStatus OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable to include Interface Status TLV in LBM messages.
        "
    ::= { calixSoamExtCfgEntry 13 }

calixSoamExtCfgLbmOptTlvData OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable to include Data TLV in LBM messages.
        "
    ::= { calixSoamExtCfgEntry 14 }

calixSoamExtCfgDmmOptTlvData OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable to include Data TLV in DMM messages.
        "
    ::= { calixSoamExtCfgEntry 15 }

-- ******************************************************************
-- LOAM Configration Extension 
-- ******************************************************************

calixLoamExtCfgTable OBJECT-TYPE
    SYNTAX 		SEQUENCE  OF  CalixLoamExtCfgEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains settings for enabling/disabling the Link OAM feature."
    ::= { calixEoamExtConfig 11 }

calixLoamExtCfgEntry OBJECT-TYPE
    SYNTAX      CalixLoamExtCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "General Link OAM Configuration Table."
    INDEX { calixLoamExtCfgIndex
          }
    ::= { calixLoamExtCfgTable 1}

CalixLoamExtCfgEntry ::= SEQUENCE {
	calixLoamExtCfgIndex				Unsigned32, 
    calixLoamExtCfgAdminState			CalixEoamEnableType
    }

calixLoamExtCfgIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Index of auto instantiated configuration MIB.  Must be 1.
        "
    ::= { calixLoamExtCfgEntry 1 }

calixLoamExtCfgAdminState OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "State of Service level Ethernet OAM.  Set this to enable to begin transmitting Ethernet OAM
         frames from configures MEG/MEPs.
        "
    ::= { calixLoamExtCfgEntry 2 }

-- ******************************************************************
-- RFC 2544 configuration
-- ******************************************************************

calixRfc2544CfgTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF CalixRfc2544CfgEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "This table places a port in RFC2544 Reflector Mode."
    ::=  { calixEoamExtConfig 12 }

calixRfc2544CfgEntry OBJECT-TYPE
    SYNTAX         CalixRfc2544CfgEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "Only one port can be in RFC 2544 Reflector Mode at any given time."
    INDEX {  calixRfc2544CfgIndex }
    ::=  { calixRfc2544CfgTable 1 }

CalixRfc2544CfgEntry ::=  SEQUENCE {
	calixRfc2544CfgIndex  			   Unsigned32, 
    calixRfc2544CfgIfIndex      	   InterfaceIndex,
    calixRfc2544CfgAdminState          CalixEoamEnableType,
    calixRfc2544CfgVlanId			   VlanId,
    calixRfc2544CfgMacAddress          MacAddress
    }

calixRfc2544CfgIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Index of auto instantiated RFC 2544 configuration MIB.  Must be 1.
        "
    ::= { calixRfc2544CfgEntry 1 }

calixRfc2544CfgAdminState  OBJECT-TYPE
    SYNTAX      CalixEoamEnableType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Administrative state of the RFC 2544 Reflector."
    ::= { calixRfc2544CfgEntry 2 }

calixRfc2544CfgIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This attributes specifies the interface index for the port
         in RFC 2544 Reflector Mode.
        "
    ::= { calixRfc2544CfgEntry 3 }

calixRfc2544CfgVlanId  OBJECT-TYPE
    SYNTAX      VlanId
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "VLAN ID of Service."
    ::= { calixRfc2544CfgEntry 4 }

calixRfc2544CfgMacAddress  OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Destination MAC address of frames to reflect."
    ::= { calixRfc2544CfgEntry 5 }

END