-- $Log: E5-111-AESCOMMON-MIB.mib $ -- Revision 1.3 2010/03/29 02:05:58 maverick -- Revision 1.2 2009/11/23 06:51:51 maverick -- Revision 1.1 2008/07/11 09:36:12 maverick -- Initial revision -- Revision 1.3 2008/04/28 02:29:16 maverick -- Revision 1.2 2007/12/20 10:18:12 niceguy -- Revision 1.1 2007/12/03 01:45:31 niceguy -- Initial revision -- Initial revision E5-111-AESCOMMON-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString, ifIndex FROM RFC1213-MIB Unsigned32 FROM SNMPv2-SMI aesSeriesCommon FROM E5-111-MIB; aesMaxNumOfProfiles OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of ADSL profiles which the system supports." ::= { aesSeriesCommon 1 } aesLineConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AesLineConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes common attributes describing the ADSL line." ::= { aesSeriesCommon 2 } aesLineConfEntry OBJECT-TYPE SYNTAX AesLineConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in aesLineConfTable." INDEX { ifIndex } ::= { aesLineConfTable 1 } AesLineConfEntry ::= SEQUENCE { aesLineConfAdslMode INTEGER, aesLineConfEncap INTEGER, aesLineConfVpi INTEGER, aesLineConfVci INTEGER, aesLineConfAnnexL INTEGER, aesLineConfPmMode INTEGER, aesLineConfRateMode INTEGER, aesLineConfAnnexM INTEGER } aesLineConfAdslMode OBJECT-TYPE SYNTAX INTEGER { gDotLite(1), gDotDmt(2), t1Dot413(3), auto(4), etsi(5), adsl2(6), adsl2Plus(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mode of the ADSL line." ::= { aesLineConfEntry 1 } aesLineConfEncap OBJECT-TYPE SYNTAX INTEGER { llc(1), vc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The encapsulation of the ADSL line." ::= { aesLineConfEntry 2 } aesLineConfVpi OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The VPI of the ADSL line." ::= { aesLineConfEntry 3 } aesLineConfVci OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The VCI of the ADSL line." ::= { aesLineConfEntry 4 } aesLineConfAnnexL OBJECT-TYPE SYNTAX INTEGER { enableNarrowMode(1), enableWideMode(2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The annex L setting of the ADSL line(Only in AnnexA)." ::= { aesLineConfEntry 5 } aesLineConfPmMode OBJECT-TYPE SYNTAX INTEGER { enableL2Mode(1), enableL2Mode(2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The power management mode of the ADSL line." ::= { aesLineConfEntry 6 } aesLineConfRateMode OBJECT-TYPE SYNTAX INTEGER { fixed(1), -- no rate adaptation adaptAtStartup(2), -- perform rate adaptation -- only at initialization adaptAtRuntime(3) -- perform rate adaptation at -- any time } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information." ::= { aesLineConfEntry 7 } aesLineConfAnnexM OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The annex M setting of the ADSL line." ::= { aesLineConfEntry 8 } -- ADSL Line Diagnostic aesLineDiagnostic OBJECT IDENTIFIER ::= { aesSeriesCommon 3 } aesAtucLineDiagLATN OBJECT-TYPE SYNTAX INTEGER UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Line Attenuation." ::= { aesLineDiagnostic 1 } aesAtucLineDiagSATN OBJECT-TYPE SYNTAX INTEGER UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal Attenuation." ::= { aesLineDiagnostic 2 } aesAtucLineDiagSNRM OBJECT-TYPE SYNTAX INTEGER UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal-to-Noise Ratio Margin." ::= { aesLineDiagnostic 3 } aesAtucLineDiagACTATP OBJECT-TYPE SYNTAX INTEGER UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Transmit Power." ::= { aesLineDiagnostic 4 } aesAtucLineDiagATTNDR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Attainable Net Data Rate, in bps." ::= { aesLineDiagnostic 5 } aesAturLineDiagLATN OBJECT-TYPE SYNTAX INTEGER UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Line Attenuation." ::= { aesLineDiagnostic 6 } aesAturLineDiagSATN OBJECT-TYPE SYNTAX INTEGER UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal Attenuation." ::= { aesLineDiagnostic 7 } aesAturLineDiagSNRM OBJECT-TYPE SYNTAX INTEGER UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal-to-Noise Ratio Margin." ::= { aesLineDiagnostic 8 } aesAturLineDiagACTATP OBJECT-TYPE SYNTAX INTEGER UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Transmit Power." ::= { aesLineDiagnostic 9 } aesAturLineDiagATTNDR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Attainable Net Data Rate, in bps." ::= { aesLineDiagnostic 10 } aesLineDiagTarget OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Ifindex of the ADSL port which will be diagnosed." ::= { aesLineDiagnostic 11 } aesLineDiagOps OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The manager sets the object to one to start line diagnostics and the agent clears the object to zero when diagnostics is successfully completed." ::= { aesLineDiagnostic 12 } aesLineDiagFailReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The reason of failed diagnostics." ::= { aesLineDiagnostic 13 } -- ADSL Line Diagnostic Per Subcarrier aesLineDiagPs OBJECT IDENTIFIER ::= { aesSeriesCommon 4 } aesAtucNumOfSubcarriersPerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of subcarriers per port for ATU-C." ::= { aesLineDiagPs 1 } aesAturNumOfSubcarriersPerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of subcarriers per port for ATU-R." ::= { aesLineDiagPs 2 } aesLineDiagPsCCFLirl1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 1, and the second two octets specify the li.rl value for subcarrier 2, and so on. The object provides li.rl values for subcarrier 1 to 256." ::= { aesLineDiagPs 3 } aesLineDiagPsCCFLirl2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 257, and the second two octets specify the li.rl value for subcarrier 258, and so on. The object provides li.rl values for subcarrier 257 to 512." ::= { aesLineDiagPs 4 } aesLineDiagPsCCFLiim1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 1, and the second two octets specify the li.im value for subcarrier 2, and so on. The object provides li.im values for subcarrier 1 to 256." ::= { aesLineDiagPs 5 } aesLineDiagPsCCFLiim2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 257, and the second two octets specify the li.im value for subcarrier 258, and so on. The object provides li.im values for subcarrier 257 to 512." ::= { aesLineDiagPs 6 } aesLineDiagPsCCFLog1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 1, and the second two octets specify the log value for subcarrier 2, and so on. The object provides log values for subcarrier 1 to 256." ::= { aesLineDiagPs 7 } aesLineDiagPsCCFLog2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 257, and the second two octets specify the log value for subcarrier 258, and so on. The object provides log values for subcarrier 257 to 512." ::= { aesLineDiagPs 8 } aesLineDiagPsQLN OBJECT-TYPE SYNTAX OCTET STRING UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Quiet Line Noise PSD QLN(f) per subcarrier. The first octet specify QLN for subcarrier 1, and the second octet specify QLN for subcarrier 2, and so on. The object provides QLN for subcarrier 1 to 512." ::= { aesLineDiagPs 9 } aesLineDiagPsSNR OBJECT-TYPE SYNTAX OCTET STRING UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal-to-Noise Ratio SNR(f) per subcarrier. The first octet specify SNR for subcarrier 1, and the second octet specify SNR for subcarrier 2, and so on. The object provides SNR for subcarrier 1 to 512." ::= { aesLineDiagPs 10 } -- Max # of Alarm Profiles aesMaxNumOfAlarmProfiles OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of ADSL alarm profiles which the system supports." ::= { aesSeriesCommon 5 } -- Bit Loading aesBitLoadingTable OBJECT-TYPE SYNTAX SEQUENCE OF AesBitLoadingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the number of bits per carrier for each ADSL port." ::= { aesSeriesCommon 6 } aesBitLoadingEntry OBJECT-TYPE SYNTAX AesBitLoadingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in aesBitLoadingTable." INDEX { ifIndex } ::= { aesBitLoadingTable 1 } AesBitLoadingEntry ::= SEQUENCE { aesBitLoadingBits OCTET STRING, aesBitLoadingAtucNumOfCarriers INTEGER, aesBitLoadingAturNumOfCarriers INTEGER } aesBitLoadingBits OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the number of bits for all carriers in the port. The first octet specify the number of bits for carrier 1, and the second octet specify the number of bits for carrier 2, and so on. The object provides the number of bits for carrier 1 to 512." ::= { aesBitLoadingEntry 1 } aesBitLoadingAtucNumOfCarriers OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of carriers for ATU-C." ::= { aesBitLoadingEntry 2 } aesBitLoadingAturNumOfCarriers OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of carriers for ATU-R." ::= { aesBitLoadingEntry 3 } -- Line Status aesLineStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AesLineStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the ADSL line status." ::= { aesSeriesCommon 7 } aesLineStatusEntry OBJECT-TYPE SYNTAX AesLineStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in aesLineStatusTable." INDEX { ifIndex } ::= { aesLineStatusTable 1 } AesLineStatusEntry ::= SEQUENCE { aesLineStatusAdslMode INTEGER } aesLineStatusAdslMode OBJECT-TYPE SYNTAX INTEGER { gDotLite(1), gDotDmt(2), t1Dot413(3), etsi(4), adsl2(5), adsl2Plus(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The link up mode of the ADSL line." ::= { aesLineStatusEntry 1 } -------------------- -- selt -------------------- selt OBJECT IDENTIFIER ::= { aesSeriesCommon 8 } seltTarget OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "IfIndex of the port which would be performed single end loopback test." ::= { selt 1 } seltOps OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed." ::= { selt 2 } seltStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Status description of the selt result." ::= { selt 3 } seltCableType OBJECT-TYPE SYNTAX INTEGER { awg24(1), awg26(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The cable type that selt result indicates." ::= { selt 4 } seltLoopEstimateLengthFt OBJECT-TYPE SYNTAX INTEGER UNITS "feet" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated loop length that selt result indicates." ::= { selt 5 } seltLoopEstimateLengthMeter OBJECT-TYPE SYNTAX INTEGER UNITS "meter" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated loop length that selt result indicates." ::= { selt 6 } END