--
-- 		whisp-sm-mib.mib
--		GENERATED FROM ui_db.xml
--
--      *****************************************************************************************
--		Copyright 2005 - 2015 (c), Cambium Networks
--      Cambium Networks Confidential Proprietary
--      *****************************************************************************************
--
--      Canopy SM and Backhaul Timing Slave MIB definitions.
--
--      *****************************************************************************************

WHISP-SM-MIB   DEFINITIONS ::= BEGIN
IMPORTS
		MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, TimeTicks, IpAddress, Unsigned32
				FROM SNMPv2-SMI
		DisplayString, PhysAddress, MacAddress
				FROM SNMPv2-TC
		OBJECT-GROUP
				FROM SNMPv2-CONF
		WhispLUID, WhispMACAddress
				FROM WHISP-TCV2-MIB
		whispModules, whispBox, whispAps, whispSm
				FROM WHISP-GLOBAL-REG-MIB
		dhcpRfPublicIp, whispBoxEsn
				FROM WHISP-BOX-MIBV2-MIB
				;

whispSmMibModule  MODULE-IDENTITY
	LAST-UPDATED	"200304150000Z"
	ORGANIZATION	"Cambium Networks"
	CONTACT-INFO
		"Cambium Networks Support
        email: support@cambiumnetworks.com"
	DESCRIPTION
		"This module contains MIB definitions for Subscriber Modem."
	::= {whispModules 13}

-- -------------------------------------------------------------------------
-- Top Level Registrations

whispSmConfig		OBJECT IDENTIFIER ::= {whispSm 1}
whispSmSecurity		OBJECT IDENTIFIER ::= {whispSm 7}
whispSmStatus		OBJECT IDENTIFIER ::= {whispSm 2}
whispSmGroups		OBJECT IDENTIFIER ::= {whispSm 3}
whispSmEvent		OBJECT IDENTIFIER ::= {whispSm 4}
whispSmDfsEvent		OBJECT IDENTIFIER ::= {whispSmEvent 1}
whispSmSpAnEvent		OBJECT IDENTIFIER ::= {whispSmEvent 2}
whispSmDHCPClientEvent		OBJECT IDENTIFIER ::= {whispSmEvent 3}
whispSmControls		OBJECT IDENTIFIER ::= {whispSm 8}

-- -------------------------------------------------------------------------


-- Subscriber Modem and Backhaul timing slave configuration

	rfScanList	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"RF scan list string.
            The frequencies vary by product and region.
            If the frequency list is too long an SNMP error will be returned. If this occurs please refer to 
            OID rfScanListTable, which will allow user to enter the full range of available frequencies.
            String length is limited to SNMP buffer size, so while all frequencies may be set, not all may be retrieved.
            Special settings:
            0:  none.
            all: All frequencies in the band(s) supported by the radio will be selected.
            all49, all51, all52: Available only for 450i 5 GHz wideband radio.
            all54, all57: Available only for 450 and 450i 5 GHz radios.
            When doing a set, separate values with comma with no white space between values."
		::={whispSmConfig 1}

	powerUpMode	OBJECT-TYPE
		SYNTAX		INTEGER {
					operational(0),
					aim(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"SM Power Up Mode With No 802.3 Link.
            0 - Power up in Operational mode.
            1 - Power up in Aim mode."
		::={whispSmConfig 2}

	lanIpSm	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"LAN IP."
		::={whispSmConfig 3}

	lanMaskSm	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"LAN subnet mask."
		::={whispSmConfig 4}

	defaultGwSm	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Default gateway."
		::={whispSmConfig 5}

	networkAccess	OBJECT-TYPE
		SYNTAX		INTEGER {
					localIP(0),
					publicIP(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Network accessibility. Public or local IP.
            For multipoint only."
		::={whispSmConfig 6}

	authKeySm	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication key. It should be equal or less than 32
            characters long."
		::={whispSmConfig 7}

	enable8023link	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"To enable or disable 802.3 link. For SMs only.  Deprecated: Use enable8023linkBox instead."
		::={whispSmConfig 8}

	authKeyOption	OBJECT-TYPE
		SYNTAX		INTEGER {
					useDefault(0),
					useKeySet(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This option is for SMs only. Backhaul timing slave always
            uses the set key.
            0 - Use default key.
            1 - Use set key."
		::={whispSmConfig 9}

	timingPulseGated	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"0 - Disable (Always propagate the frame timing pulse).
            1 - Enable (If SM out of sync then dont propagate the frame timing pulse)."
		::={whispSmConfig 10}

-- NAPT configuration

	naptPrivateIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"NAPT private IP address. Only the first three bytes can be
            changed when NAPT is enabled."
		::={whispSmConfig 11}

	naptPrivateSubnetMask	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"NAPT private subnet mask. Only the last byte can be
            changed when NAPT is enabled. The address will always be:
            255.255.255.x."
		::={whispSmConfig 12}

	naptPublicIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"IP Address of NAPT Public Interface. The variable is available
            only when NAPT is enabled."
		::={whispSmConfig 13}

	naptPublicSubnetMask	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Subnet mask for NAPT Public Interface. The variable is available
            only when NAPT is enabled."
		::={whispSmConfig 14}

	naptPublicGatewayIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"IP Address of NAPT Public Interface Gateway. The variable is available
            only when NAPT is enabled."
		::={whispSmConfig 15}

	naptRFPublicIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"IP Address of RF Public Interface. The variable is available
            only when NAPT is enabled."
		::={whispSmConfig 16}

	naptRFPublicSubnetMask	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Subnet mask of RF Public Interface. The variable is available
            only when NAPT is enabled."
		::={whispSmConfig 17}

	naptRFPublicGateway	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"IP Address of RF Public Interface Gateway. The variable is
            available only when NAPT is enabled."
		::={whispSmConfig 18}

	naptEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable NAPT. For multipoint only.
            1=Enable NAPT, 0=Disable NAPT."
		::={whispSmConfig 19}

	arpCacheTimeout	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"ARP cache time out in unit of minutes. For multipoint only.
            Range from 1-30."
		::={whispSmConfig 20}

	tcpGarbageCollectTmout	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Units of minutes for TCP garbage collection. For multipoint only.
            Range 4-1440."
		::={whispSmConfig 21}

	udpGarbageCollectTmout	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Units of minutes for UDP garbage collection. For multipoint only.
            Range 1-1440."
		::={whispSmConfig 22}

-- DHCP configuration

	dhcpClientEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To enable or disable DHCP client. For multipoint SM's
            with NAPT enabled."
		::={whispSmConfig 23}

	dhcpServerEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable DHCP server. For multipoint SM's
            with NAPT enabled."
		::={whispSmConfig 24}

	dhcpServerLeaseTime	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Units of days for DHCP server lease time. For multipoint
            SM's with NAPT enabled. Range from 1-30."
		::={whispSmConfig 25}

	dhcpIPStart	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"The last byte will be set for the starting IP that
            our DHCP server gives away. The first 3 bytes of the
            starting IP are the same as those of NAPT private IP"
		::={whispSmConfig 26}

	dnsAutomatic	OBJECT-TYPE
		SYNTAX		INTEGER {
					manually(0),
					automatically(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To have DHCP Server obtain DNS information automatically or manually."
		::={whispSmConfig 27}

	prefferedDNSIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"The preferred DNS IP when we are configured for static DNS
            (Not used when configured for automatic DNS)."
		::={whispSmConfig 28}

	alternateDNSIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"The alternate DNS IP when we are configured for static DNS
            (Not used when configured for automatic DNS)."
		::={whispSmConfig 29}

	dmzIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Only the last byte of DMZ Host IP will be set.
            The first 3 bytes of DMZ IP are the same as those of
            NAPT private IP."
		::={whispSmConfig 30}

	dmzEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable DMZ host functionality."
		::={whispSmConfig 31}

	dhcpNumIPsToLease	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Number of IP addresses that our DHCP server can give away."
		::={whispSmConfig 32}

	pppoeFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set PPPoE packet filter when NAT is disabled.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 33}

	smbFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set SMB packet filter when NAT is disabled.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 34}

	snmpFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set SNMP packet filter when NAT is disabled.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 35}

	userP1Filter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set user defined port 1 packet filter when
            NAT is disabled.
               Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 36}

	userP2Filter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set user defined port 2 packet filter when
            NAT is disabled.
               Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 37}

	userP3Filter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set user defined port 3 packet filter when
            NAT is disabled.
               Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 38}

	allOtherIpFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set all other IPv4 packet filter when NAT
            is disabled.
                Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 39}

	upLinkBCastFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"This variable is currently obsolete."
		::={whispSmConfig 40}

	arpFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set ARP packet filter when NAT is disabled.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 41}

	allOthersFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set all other packet filter when NAT is disabled.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 42}

-- User Defined Port Filtering Configuration

	userDefinedPort1	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"An integer value of number one user defined port. Range:0-65535
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 43}

	port1TCPFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set user defined port 1 TCP traffic filter.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 44}

	port1UDPFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set user defined port 1 UDP traffic filter.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 45}

	userDefinedPort2	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"An integer value of number two user defined port. Range:0-65535
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 46}

	port2TCPFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set user defined port 2 TCP traffic filter.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 47}

	port2UDPFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set user defined port 2 UDP traffic filter.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 48}

	userDefinedPort3	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"An integer value of number three user defined port. Range:0-65535
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 49}

	port3TCPFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set user defined port 3 TCP traffic filter.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 50}

	port3UDPFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set user defined port 3 UDP traffic filter.
                            Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 51}

	bootpcFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set bootp client sourced packets filter when
            NAT is disabled.
               Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 52}

	bootpsFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set bootp server sourced packets filter when
            NAT is disabled.
               Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 53}

	ip4MultFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set IPv4 MultiCast packets filter when
            NAT is disabled.
               Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 54}

	ingressVID	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Untagged ingress VID."
		::={whispSmConfig 55}

-- CIR configuration

	lowPriorityUplinkCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Low priority uplink CIR."
		::={whispSmConfig 56}

	lowPriorityDownlinkCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Low priority downlink CIR."
		::={whispSmConfig 57}

	hiPriorityChannel	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable high priority channel."
		::={whispSmConfig 58}

	hiPriorityUplinkCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"High priority uplink CIR."
		::={whispSmConfig 59}

	hiPriorityDownlinkCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"High priority downlink CIR."
		::={whispSmConfig 60}

	smRateAdapt	OBJECT-TYPE
		SYNTAX		INTEGER {
					onex(0),
					onextwox(1),
					onextwoxthreex(2)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x,2x and 3x adaptation."
		::={whispSmConfig 61}

	upLnkDataRate	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Sustained uplink bandwidth cap."
		::={whispSmConfig 62}

	upLnkLimit	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Burst uplink bandwidth cap."
		::={whispSmConfig 63}

	dwnLnkDataRate	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Sustained downlink bandwidth cap."
		::={whispSmConfig 64}

	dwnLnkLimit	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Burst downlink bandwidth cap."
		::={whispSmConfig 65}

	dfsConfig	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios."
		::={whispSmConfig 66}

	ethAccessFilterEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To enable or disable Ethernet Port access filtering to SM Management Functions.
            (0) - Ethernet access to SM Management allowed.
            (1) - Ethernet access to SM Management blocked."
		::={whispSmConfig 67}

	ipAccessFilterEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable IP access filtering to Management functions.
            (0) - IP access will be allowed from all addresses.
            (1) - IP access will be controlled using allowedIPAccess1-3 entries."
		::={whispSmConfig 68}

	allowedIPAccess1	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Allow access to SM Management from this IP.
            0 is default setting to allow from all IPs."
		::={whispSmConfig 69}

	allowedIPAccess2	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Allow access to SM Management from this IP.
            0 is default setting to allow from all IPs."
		::={whispSmConfig 70}

	allowedIPAccess3	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Allow access to SM Management from this IP.
            0 is default setting to allow from all IPs."
		::={whispSmConfig 71}

	rfDhcpState	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable RF Interface DHCP feature."
		::={whispSmConfig 72}

-- Broadcast MIR Feature.

	bCastMIR	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable and set Broadcast/ Multicast MIR feature. Use value of 0 to disable. 
                        Units are as per bCastMIRUnits variable. Set the units first and then set this value."
		::={whispSmConfig 73}

	bhsReReg	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not.  24 Hour Encryption Refresh."
		::={whispSmConfig 74}

	smLEDModeFlag	OBJECT-TYPE
		SYNTAX		INTEGER {
					legacy(0),
					revised(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To set LED Panel Operation to Revised Mode(1) or to Legacy Mode(0)"
		::={whispSmConfig 75}

	ethAccessEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable Ethernet Port access to SM Management Functions.
            (1) - Ethernet access to SM Management allowed.
            (0) - Ethernet access to SM Management blocked."
		::={whispSmConfig 76}

	pppoeEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable or disable PPPoE on the SM.  NAT MUST be enabled prior and Translation Bridging MUST be DISABLED on the AP."
		::={whispSmConfig 77}

	pppoeAuthenticationType	OBJECT-TYPE
		SYNTAX		INTEGER {
					none(0),
					chap-pap(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Set the PPPoE Authentication Type to either None or CHAP/pap"
		::={whispSmConfig 78}

	pppoeAccessConcentrator	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Set the PPPoE Access Concentrator Name.  Less than or equal to 32 characters"
		::={whispSmConfig 79}

	pppoeServiceName	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Set the PPPoE Service Name.  Less than or equal to 32 characters"
		::={whispSmConfig 80}

	pppoeUserName	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Set the PPPoE Username.  Less than or equal to 32 characters"
		::={whispSmConfig 81}

	pppoePassword	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Set the PPPoE Password.  Less than or equal to 32 characters"
		::={whispSmConfig 82}

	pppoeTCPMSSClampEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable or disable TCP MSS Clamping.  Enabling this will cause the SM to edit the TCP MSS in TCP SYN and SYN-ACK packets.
            			This will allow for a workaround for MTU issues so that the TCP session will only go up to the clamped MSS.  If you are
            			using PMTUD reliably, this should not be needed."
		::={whispSmConfig 83}

	pppoeMTUOverrideEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable the overriding of the PPP link's MTU.  Normally, the PPP link will set the MTU to the MRU of the
            			PPPoE Server, but this may be overridden.  If the MRU of the PPPoE server is smaller than the desired MTU,
            			the smaller MTU will be used."
		::={whispSmConfig 84}

	pppoeMTUOverrideValue	OBJECT-TYPE
		SYNTAX		INTEGER (0..1492)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable the overriding of the PPP link's MTU.  Normally, the PPP link will set the MTU to the MRU of the
            			PPPoE Server, but this may be overridden.  If the MRU of the PPPoE server is smaller than the desired MTU,
            			the smaller MTU will be used.  Max MTU of a PPPoE link is 1492."
		::={whispSmConfig 85}

	pppoeTimerType	OBJECT-TYPE
		SYNTAX		INTEGER {
					keepAlive(1),
					idleTimeout(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Set the PPPoE Timer type.  Can be a Keep Alive timer where the link will be checked periodically and
            			automatically redialed if the link is down.  Also could be an Idle Timeout where the link will
            			be automatically dropped after an idle period and redialed if user data is present. Keep Alive timers
            			are in seconds while Idle Timeout timers are in minutes."
		::={whispSmConfig 86}

	pppoeTimeoutPeriod	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"The Timeout Period.  The use of this depends on the Timer Type.  If the Timer Type is KeepAlive, then
            			the timeout period is in seconds.  If the Timer Type is Idle Timeout, then the timeout period is in minutes.
            			Minimum values are 20 seconds for KeepAlive timer, and 5 minutes for Idle Timeout."
		::={whispSmConfig 87}

	timedSpectrumAnalysisDuration	OBJECT-TYPE
		SYNTAX		INTEGER (10..1000)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"As of release 13.0.2 this value is depricated. Please use the OID in whispBoxConfig.
                            Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds."
		::={whispSmConfig 88}

	spectrumAnalysisOnBoot	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable Spectrum Analysis on boot up for one scan through the band.
							(0) - Disabled
                            (1) - Enabled"
		::={whispSmConfig 89}

	spectrumAnalysisAction	OBJECT-TYPE
		SYNTAX		INTEGER {
					stopSpectrumAnalysis(0),
					startTimedSpectrumAnalysis(1),
					startContinuousSpectrumAnalysis(2),
					idleNoSpectrumAnalysis(3),
					idleCompleteSpectrumAnalysis(4),
					inProgressTimedSpectrumAnalysis(5),
					inProgressContinuousSpectrumAnalysis(6)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"As of release 13.0.2, this OID has been deprecated. Please use the OID in whispBoxConfig.
                            Start or stop timed or continuous Spectrum Analysis and also give status.
                            (0) - Stop Spectrum Analysis
                            (1) - Start Timed Spectrum Analysis
                            (2) - Start Continuous Spectrum Analysis
                            (3) - Idle, no Spectrum Analysis results.
                            (4) - Idle, Spectrum Analysis results available.
                            (5) - Timed or Remote Spectrum Analysis in progress.
                            (6) - Continuous Spectrum Analysis in progress.

                            Note: Continuous mode has a max of 24 hours."
		::={whispSmConfig 90}

	pppoeConnectOD	OBJECT-TYPE
		SYNTAX		INTEGER {
					connectOnDemand(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Force a manual PPPoE connection attempt."
		::={whispSmConfig 91}

	pppoeDisconnectOD	OBJECT-TYPE
		SYNTAX		INTEGER {
					disconnectOnDemand(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Force a manual PPPoE disconnection."
		::={whispSmConfig 92}

	smAntennaType	OBJECT-TYPE
		SYNTAX		INTEGER {
					integrated(0),
					external(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Deprecated. See whispBoxStatus.antType for antenna type information."
		::={whispSmConfig 93}

-- SM NAT Connection Type

	natConnectionType	OBJECT-TYPE
		SYNTAX		INTEGER {
					staticIP(0),
					dhcp(1),
					pppoe(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To configure the SM NAT connection type.  Options are Static IP, DHCP, or PPPoE."
		::={whispSmConfig 94}

-- SM WAN (NAT and/or PPPoE) Ping Reply Enable

	wanPingReplyEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Allow Ping replies from SM WAN interface.  Applies to both NAT and PPPoE WAN interfaces."
		::={whispSmConfig 95}

	packetFilterDirection	OBJECT-TYPE
		SYNTAX		INTEGER {
					upstream(1),
					downstream(2)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To packet filter direction when NAT is disabled.  Upstream is default.
                                 Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 96}

	colorCode2	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Second Color code. The variable is deprecated.  See additionalColorCode in whispSmConfig."
		::={whispSmConfig 97}

	colorCodepriority2	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Priority setting for the second color code. The variable is deprecated.
                        	See additionalColorCodePriority in whispSmConfig."
		::={whispSmConfig 98}

	colorCode3	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Third Color code. The variable is deprecated.  See additionalColorCode in whispSmConfig."
		::={whispSmConfig 99}

	colorCodepriority3	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Priority setting for the third color code. The variable is deprecated.
                        	See additionalColorCodePriority in whispSmConfig."
		::={whispSmConfig 100}

	colorCode4	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Fourth Color code. The variable is deprecated.  See additionalColorCode in whispSmConfig."
		::={whispSmConfig 101}

	colorCodepriority4	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Priority setting for the fourth color code. The variable is deprecated.
                        	See additionalColorCodePriority in whispSmConfig."
		::={whispSmConfig 102}

	colorCode5	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Fifth Color code. The variable is deprecated.  See additionalColorCode in whispSmConfig."
		::={whispSmConfig 103}

	colorCodepriority5	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Priority setting for the fifth color code. The variable is deprecated.
                        	See additionalColorCodePriority in whispSmConfig."
		::={whispSmConfig 104}

	colorCode6	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Sixth Color code. The variable is deprecated.  See additionalColorCode in whispSmConfig."
		::={whispSmConfig 105}

	colorCodepriority6	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Priority setting for the sixth color code. The variable is deprecated.
                        	See additionalColorCodePriority in whispSmConfig."
		::={whispSmConfig 106}

	colorCode7	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Seventh Color code. The variable is deprecated.  See additionalColorCode in whispSmConfig."
		::={whispSmConfig 107}

	colorCodepriority7	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Priority setting for the seventh color code. The variable is deprecated.
                        	See additionalColorCodePriority in whispSmConfig."
		::={whispSmConfig 108}

	colorCode8	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Eighth Color code. The variable is deprecated.  See additionalColorCode in whispSmConfig."
		::={whispSmConfig 109}

	colorCodepriority8	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Priority setting for the eighth color code. The variable is deprecated.
                        	See additionalColorCodePriority in whispSmConfig."
		::={whispSmConfig 110}

	colorCode9	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Ninth Color code. The variable is deprecated.  See additionalColorCode in whispSmConfig."
		::={whispSmConfig 111}

	colorCodepriority9	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Priority setting for the ninth color code. The variable is deprecated.
                        	See additionalColorCodePriority in whispSmConfig."
		::={whispSmConfig 112}

	colorCode10	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Tenth Color code. The variable is deprecated.  See additionalColorCode in whispSmConfig."
		::={whispSmConfig 113}

	colorCodepriority10	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Priority setting for the tenth color code. The variable is deprecated.
                        	See additionalColorCodePriority in whispSmConfig."
		::={whispSmConfig 114}

	natDNSProxyEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"If enabled, the SM will advertise itself as the DNS server when it sends out DHCP client leases and forward DNS queries automatically.
                        	If disabled, the SM will forward on upstream DNS server information when it sends out DHCP client leases."
		::={whispSmConfig 115}

	allIpv4Filter	OBJECT-TYPE
		SYNTAX		INTEGER {
					filterOff(0),
					filterOn(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To set all IPv4 packet filter when NAT
            is disabled.  Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp,
            IPv4 Mcast, User Defined Ports, and All Other IPv4).
                  Obsolete - Use corresponding OID in whipsBoxConfig MIB."
		::={whispSmConfig 116}

	spectrumAnalysisDisplay	OBJECT-TYPE
		SYNTAX		INTEGER {
					averaging(0),
					instantaneous(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"The display for Spectrum Analyzer:
                            (0) - Averaging over entire period
                            (1) - Instantaneous showing the last reading"
		::={whispSmConfig 117}

	syslogSMXmitSetting	OBJECT-TYPE
		SYNTAX		INTEGER {
					obtain-from-AP(0),
					enable(1),
					disable(2)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Obtains Syslog transmit configuration from AP/BHM if set to 0, overrides if 1 or 2. Transmits syslog data to Syslog server if enabled(1), stops if disabled (2)."
		::={whispSmConfig 118}

	syslogServerApPreferred	OBJECT-TYPE
		SYNTAX		INTEGER {
					use-local(0),
					use-AP-preferred(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Uses Syslog server configuration from AP/BHM if enabled and available,
		             otherwise uses local configuration."
		::={whispSmConfig 119}

	syslogMinLevelApPreferred	OBJECT-TYPE
		SYNTAX		INTEGER {
					use-local(0),
					use-AP-preferred(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Uses Syslog minimum transmit level configuration from AP/BHM if available,
                 otherwise uses local configuration."
		::={whispSmConfig 120}

	syslogSMXmitControl	OBJECT-TYPE
		SYNTAX		INTEGER {
					obtain-from-AP-default-disabled(0),
					obtain-from-AP-default-enabled(1),
					disable(2),
					enable(3)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Obtains Syslog transmit configuration from AP/BHM if available, or specifies the local transmit state."
		::={whispSmConfig 121}

	eapPeerAAAServerCommonName	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"THIS OID IS CURRENTLY UNUSED: EAP Peer Server Common Name"
		::={whispSmConfig 126}

	rfScanListBandFilter	OBJECT-TYPE
		SYNTAX		INTEGER {
					band5400(8),
					band5700(9)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"This element is obsolete."
		::={whispSmConfig 127}

	upLnkMaxBurstDataRate	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"Kilobits/sec"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Maximum burst uplink rate."
		::={whispSmConfig 128}

	dwnLnkMaxBurstDataRate	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"Kilobits/sec"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Maximum burst downlink rate."
		::={whispSmConfig 129}

	cyclicPrefixScan	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Cyclic Prefix value for frequency scanning used by MIMO SMs only.
                        When setting use a comma delimited list of cyclic prefixes with no spaces.  For example: 1/8,1/16"
		::={whispSmConfig 130}

	bandwidthScan	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Bandwidth values for frequency scanning used by MIMO SMs only.
                            When setting use a comma delimited list of bandwidths.
                            For example: 10, 20"
		::={whispSmConfig 131}

	apSelection	OBJECT-TYPE
		SYNTAX		INTEGER {
					powerLevel(1),
					optimizeForThroughput(0)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This OID affects what AP to attempt to register to when Canopy SMs scan see more than one AP that are valid in it's configuration.
                            (0) - Default, Canopy radios after scanning select the best AP that will optimize for estimated throughput.
                            (1) - Select the AP with the best receive power level.
                            Note this is only if multiple APs fit the current scan configuration, and will be overriden by color codes, RADIUS, etc."
		::={whispSmConfig 132}

	radioBandscanConfig	OBJECT-TYPE
		SYNTAX		INTEGER {
					instant(0),
					delayed(1),
					apply(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Used to determine when frequency, cyclic prefix and bandwidth settings take effect for
                        band scanning MIMO SMs.
                        0 - Instant
                        1 - Delayed
                        2 - Apply changes"
		::={whispSmConfig 133}

	forcepoweradjust	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This will force a multipoint SM to initiate an asynchronous power adjust sequence.
                        	This is done automatically every 2 minutes."
		::={whispSmConfig 134}

	clearBerrResults	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This will clear the BER results."
		::={whispSmConfig 135}

	berrautoupdateflag	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This indicates if the once a second BERR updating of counters is enabled.  1 = enabled 0 = disabled"
		::={whispSmConfig 136}

	testSMBER	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"0 - Disable (Return the SM to a normal operation state).
            1 - Enable (Set SM into a BER test state)."
		::={whispSmConfig 137}

	allowedIPAccessNMLength1	OBJECT-TYPE
		SYNTAX		INTEGER (1..32)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
		::={whispSmConfig 138}

	allowedIPAccessNMLength2	OBJECT-TYPE
		SYNTAX		INTEGER (1..32)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
		::={whispSmConfig 139}

	allowedIPAccessNMLength3	OBJECT-TYPE
		SYNTAX		INTEGER (1..32)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
		::={whispSmConfig 140}

	naptRemoteManage	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable-standalone(1),
					enable-wan(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable Remote Management. For multipoint only.
            0=Disable Remote Management,
            1=Enable - Standalone Config,
            2=Enable - Use WAN Interface."
		::={whispSmConfig 141}

	spectrumAnalysisScanBandwidth	OBJECT-TYPE
		SYNTAX		INTEGER {
					bandwidth5MHz(0),
					bandwidth10MHz(1),
					bandwidth20MHz(2),
					bandwidth7MHz(3),
					bandwidth15MHz(4),
					bandwidth30MHz(5)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Scanning Bandwidth used for the Spectrum Analyzer.  Only available on PMP 450."
		::={whispSmConfig 142}

	berDeModSelect	OBJECT-TYPE
		SYNTAX		INTEGER {
					qpsk(0),
					qam-16(1),
					qam-64(2),
					qam-256(3)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"The BER demodulation level the SM is set. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM."
		::={whispSmConfig 143}

	multicastVCRcvRate	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Multicast VC Receive Rate"
		::={whispSmConfig 144}

	pmp430ApRegistrationOptions	OBJECT-TYPE
		SYNTAX		INTEGER {
					pmp430(1),
					pmp450(2),
					both(3)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"Deprecated.  The 430 SM only supports PMP 450
                          interoperability mode."
		::={whispSmConfig 145}

	switchRadioModeAndReboot	OBJECT-TYPE
		SYNTAX		INTEGER {
					finishedReboot(0),
					switchRadioModeAndReboot(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"As of 14.2, the 430 SM no longer supports multiple 
                            radio modes. It only support 450 interoperability 
                            mode."
		::={whispSmConfig 146}

	natTslTableSize	OBJECT-TYPE
		SYNTAX		INTEGER (1024..8192)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"NAT Translation Table Size.
            					Range 1024-8192."
		::={whispSmConfig 147}

	ingressVIDPriority	OBJECT-TYPE
		SYNTAX		INTEGER (0..7)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"ingress VID VLAN Priority."
		::={whispSmConfig 148}

	ingressVIDPriorityMode	OBJECT-TYPE
		SYNTAX		INTEGER {
					promote-IP-priority(0),
					define-priority(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"ingress VID VLAN Priority Mode."
		::={whispSmConfig 149}

	providerVIDPriority	OBJECT-TYPE
		SYNTAX		INTEGER (0..7)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Provider VID VLAN Priority."
		::={whispSmConfig 150}

	providerVIDPriorityMode	OBJECT-TYPE
		SYNTAX		INTEGER {
					promote-IP-priority(0),
					define-priority(1),
					copy-inner-tag-priority(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Provider VID VLAN Priority Mode."
		::={whispSmConfig 151}

	additionalColorCode	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Add an additional color code. Setting  additionalColorCode and 
                        additionalColorCodePriority adds an entry."
		::={whispSmConfig 152}

	additionalColorCodePriority	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Add an additional color code priority. Setting  additionalColorCode and 
                        additionalColorCodePriority adds an entry."
		::={whispSmConfig 153}

	deleteAdditionalColorCode	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Delete an additional color code."
		::={whispSmConfig 154}

	bCastMIRUnits	OBJECT-TYPE
		SYNTAX		INTEGER {
					kbps(0),
					pps(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Units of Broadcast/ Multicast MIR value. Set units first and then bCastMIR"
		::={whispSmConfig 155}

	txPowerControl	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable/Disable Automatic control of SM TX power.
                            Engineering use only."
		::={whispSmConfig 157}

	bridgeTableSize	OBJECT-TYPE
		SYNTAX		INTEGER (4..4096)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Bridge Table Size : 4 -- 4096."
		::={whispSmConfig 158}

	bridgeTableRestrict	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Restrict forwarding packets from hosts for which MAC address is not in the bridge table."
		::={whispSmConfig 159}

	maxTxPowerEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable Max Tx Power configuration.
                            This is used with OID maxTxPower to set the max transmit power.
                            This might be required in certain regions and frequency bands.
                            See User Guide for more information.
                            Enabling this will not allow a radio to transmit above its EIRP limit.
                            The AP's Transmit Power Control may still adjust the Tx power down.
                            SM only."
		::={whispSmConfig 160}

	maxTxPower	OBJECT-TYPE
		SYNTAX		INTEGER (-30..27)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This OID is controled by OID maxTxPowerEnable.
                            This might be required in certain regions and frequency bands.
                            See user guide for more information.
                            Setting this will not allow a radio to transmit above its EIRP limit.
                            The AP's Transmit Power Control may still adjust the Tx power down.
                            SM only."
		::={whispSmConfig 161}

	rfScanListTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF RfScanListEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"The list of configured scanning frequencies on the SM or BHS."
		::= {whispSmConfig 156}

	rfScanListEntry OBJECT-TYPE
		SYNTAX		RfScanListEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Entry of configured scanning frequencies on the SM or BHS."
		INDEX		{rfScanListFrequency}
		::= {rfScanListTable 1}

		RfScanListEntry ::= SEQUENCE{
			rfScanListFrequency	INTEGER
			}

	rfScanListFrequency	OBJECT-TYPE
		SYNTAX		INTEGER (0..9000000)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"RF scan list.
            The frequencies vary by product and region."
		::={rfScanListEntry 1}

	numAuthCerts	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"can have a max value of 2"
		::={whispSmSecurity 2}

	authenticationEnforce	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					aaa(1),
					presharedkey(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"enforce SM to register with specifed Auth Enabled AP"
		::={whispSmSecurity 3}

-- PEAP is not supported for MPC860 platorm

	phase1	OBJECT-TYPE
		SYNTAX		INTEGER {
					eapttls(0),
					eapMSChapV2(1),
					eappeap(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Select the outer method for EAP Authentication.
            			Note: PEAP is not supported for MPC860 platform."
		::={whispSmSecurity 4}

	phase2	OBJECT-TYPE
		SYNTAX		INTEGER {
					pap(0),
					chap(1),
					mschapv2(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Select the outer method for EAP Authentication"
		::={whispSmSecurity 5}

	authOuterId	OBJECT-TYPE
		SYNTAX		OCTET STRING (SIZE (0..253))
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"EAP Peer Username"
		::={whispSmSecurity 6}

	authPassword	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"EAP Peer password"
		::={whispSmSecurity 7}

	authUsername	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"EAP Peer Identity"
		::={whispSmSecurity 8}

	useRealm	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable or disable the use of realm option."
		::={whispSmSecurity 9}

	realm	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"EAP Peer Realm"
		::={whispSmSecurity 10}

	certTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF CertEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"The table of CA Certificates on SM."
		::= {whispSmSecurity 1}

	certEntry OBJECT-TYPE
		SYNTAX		CertEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Entry of Certifcates."
		INDEX		{certIndex}
		::= {certTable 1}

		CertEntry ::= SEQUENCE{
			certIndex		INTEGER,
			cert		INTEGER,
			action		INTEGER,
			certificateDN	DisplayString
			}

	certIndex	OBJECT-TYPE
		SYNTAX		INTEGER (1..2)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"User information table index."
		::={certEntry 1}

	cert	OBJECT-TYPE
		SYNTAX		INTEGER {
					inactive(0),
					active(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"0: Inactive 1: Active"
		::={certEntry 2}

	action	OBJECT-TYPE
		SYNTAX		INTEGER {
					noop(0),
					delete(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"0: No Operation 1: Delete Certificate"
		::={certEntry 3}

	certificateDN	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Distinguished Name of Certificate 2"
		::={certEntry 4}

-- Subscriber Modem status page

	sessionStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"SM registered or not."
		::={whispSmStatus 1}

	rssi	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Radio signal strength index.  FSK only."
		::={whispSmStatus 2}

	jitter	OBJECT-TYPE
		SYNTAX		Gauge32 (0..15)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"A measure of multipath interference.  Applicable to FSK radios only."
		::={whispSmStatus 3}

	airDelay	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Round trip delay in bits."
		::={whispSmStatus 4}

	radioSlicingSm	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		obsolete
		DESCRIPTION		
			"This variable is deprecated."
		::={whispSmStatus 5}

	radioTxGainSm	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Radio transmission gain setting.  Applicable to FSK radios only."
		::={whispSmStatus 6}

	calibrationStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		deprecated
		DESCRIPTION		
			"Varible deprecated. Please use calibrationStatusBox."
		::={whispSmStatus 7}

	radioDbm	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Rx Power level.
						  For MIMO this is the combined power of the horizontal and vertical paths."
		::={whispSmStatus 8}

	registeredToAp	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"AP MAC address that the SM registered to."
		::={whispSmStatus 9}

-- DHCP client status:

	dhcpCip	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Assigned IP address to DHCP client."
		::={whispSmStatus 10}

	dhcpSip	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Public DHCP server IP."
		::={whispSmStatus 11}

	dhcpClientLease	OBJECT-TYPE
		SYNTAX		TimeTicks
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"DHCP client lease time."
		::={whispSmStatus 12}

	dhcpCSMask	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Public DHCP server subnet mask."
		::={whispSmStatus 13}

	dhcpDfltRterIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Public default router IP address."
		::={whispSmStatus 14}

	dhcpcdns1	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Primary public domain name server."
		::={whispSmStatus 15}

	dhcpcdns2	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Secondary public domain name server."
		::={whispSmStatus 16}

	dhcpcdns3	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Third public domain name server."
		::={whispSmStatus 17}

	dhcpDomName	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Public domain name server."
		::={whispSmStatus 18}

	adaptRate	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"VC adapt rate."
		::={whispSmStatus 20}

	radioDbmInt	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Radio power level(integer).
                            For MIMO radios this is the combined power of the horiztontal and vertical paths."
		::={whispSmStatus 21}

	dfsStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Dynamic frequency shifting status. For DFS Radio only."
		::={whispSmStatus 22}

	radioTxPwr	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Tx Power level. Valid for FSK and OFDM SMs."
		::={whispSmStatus 23}

	activeRegion	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The active region of the radio."
		::={whispSmStatus 24}

	snmpBerLevel	OBJECT-TYPE
		SYNTAX		INTEGER {
					twoLevelOrMimoQPSK(2),
					fourLevelOrMimo16QAM(4),
					mimo64QAM(6),
					mimo256QAM(8)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"BER level.
						  For PMP 450 systems: 2=MIMO QPSK, 4=MIMO 16-QAM, 6=MIMO64-QAM, 8=256-QAM
						  For non PMP 450: 2=2 level BER, 4=4 level BER."
		::={whispSmStatus 25}

	nbBitsRcvd	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of BER bits received (non MIMO platforms only)."
		::={whispSmStatus 26}

	nbPriBitsErr	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of Primary bit errors (non MIMO platforms only)."
		::={whispSmStatus 27}

	nbSndBitsErr	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of secondary bit errors (non MIMO platforms only)."
		::={whispSmStatus 28}

	primaryBER	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted, invalid type to represent this data. Measured Primary Bit Error Rate."
		::={whispSmStatus 29}

	secondaryBER	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted, invalid type to represent this data. Measured Secondary Bit Error Rate."
		::={whispSmStatus 30}

	totalBER	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted, invalid type to represent this data. Measured Total Bit Error Rate."
		::={whispSmStatus 31}

	minRSSI	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Measured Min. RSSI. Applicable to FSK radios only."
		::={whispSmStatus 32}

	maxRSSI	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Measured Max. RSSI. Applicable to FSK radios only."
		::={whispSmStatus 33}

	minJitter	OBJECT-TYPE
		SYNTAX		Gauge32 (0..15)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Measured Min. Jitter. Applicable to FSK radios only."
		::={whispSmStatus 34}

	maxJitter	OBJECT-TYPE
		SYNTAX		Gauge32 (0..15)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Measured Max. Jitter. Applicable to FSK radios only."
		::={whispSmStatus 35}

	smSessionTimer	OBJECT-TYPE
		SYNTAX		TimeTicks
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"SM current session timer."
		::={whispSmStatus 36}

	pppoeSessionStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current PPPoE Session Status"
		::={whispSmStatus 37}

	pppoeSessionID	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current PPPoE Session ID"
		::={whispSmStatus 38}

	pppoeIPCPAddress	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current PPPoE IPCP IP Address"
		::={whispSmStatus 39}

	pppoeMTUOverrideEn	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current PPPoE MTU Override Setting"
		::={whispSmStatus 40}

	pppoeMTUValue	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current PPPoE MTU Value"
		::={whispSmStatus 41}

	pppoeTimerTypeValue	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					keepAlive(1),
					idleTimeout(2)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current PPPoE Timer Type.  0 is disabled, 1 is Keep Alive timer, and 2 is Idle Timeout timer."
		::={whispSmStatus 42}

	pppoeTimeoutValue	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current PPPoE Timeout Period.  The use of this depends on the Timer Type.  If the Timer Type is KeepAlive, then
            			the timeout period is in seconds.  If the Timer Type is Idle Timeout, then the timeout period is in minutes."
		::={whispSmStatus 43}

	pppoeDNSServer1	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PPPoE DNS Server 1"
		::={whispSmStatus 44}

	pppoeDNSServer2	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PPPoE DNS Server 2"
		::={whispSmStatus 45}

	pppoeControlBytesSent	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PPPoE Control Bytes Sent"
		::={whispSmStatus 46}

	pppoeControlBytesReceived	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PPPoE Control Bytes Received"
		::={whispSmStatus 47}

	pppoeDataBytesSent	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PPPoE Data Bytes Sent"
		::={whispSmStatus 48}

	pppoeDataBytesReceived	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PPPoE Data Bytes Received"
		::={whispSmStatus 49}

	pppoeEnabledStatus	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PPPoE Enabled"
		::={whispSmStatus 50}

	pppoeTCPMSSClampEnableStatus	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PPPoE TCP MSS Clamping Enable"
		::={whispSmStatus 51}

	pppoeACNameStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current PPPoE Access Concentrator In Use"
		::={whispSmStatus 52}

	pppoeSvcNameStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current PPPoE Service Name In Use"
		::={whispSmStatus 53}

	pppoeSessUptime	OBJECT-TYPE
		SYNTAX		TimeTicks
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Uptime of current PPPoE Session in ticks"
		::={whispSmStatus 54}

	primaryBERDisplay	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Measured Primary Bit Error Rate.
						  Non MIMO platforms only."
		::={whispSmStatus 55}

	secondaryBERDisplay	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Measured Secondary Bit Error Rate.
						  FSK platforms only."
		::={whispSmStatus 56}

	totalBERDisplay	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Measured Total Bit Error Rate.
                            For MIMO this is combined both paths."
		::={whispSmStatus 57}

	minRadioDbm	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Maximum receive power of beacon in dBm.
                            For MIMO radios, this is only available in the vertical path."
		::={whispSmStatus 58}

	maxRadioDbm	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Maximum receive power in dBm (rounded to nearest integer)."
		::={whispSmStatus 59}

	pppoeSessIdleTime	OBJECT-TYPE
		SYNTAX		TimeTicks
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Idle Time of current PPPoE Session in ticks"
		::={whispSmStatus 60}

	radioDbmAvg	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Average Receive Power of the AP's beacon in dBm.
                            OFDM Radios only.
                            For MIMO this is only the verical path, as the beacon is not transmitted on horizontal."
		::={whispSmStatus 61}

	zoltarFPGAFreqOffset	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"FPGA peek of 70001088"
		::={whispSmStatus 62}

	zoltarSWFreqOffset	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"FPGA peek of 7000108C"
		::={whispSmStatus 63}

	airDelayns	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Round trip delay in nanoseconds."
		::={whispSmStatus 64}

	currentColorCode	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current Color Code of the Registered AP/BHM. A value of -1 is return when the device is not registered."
		::={whispSmStatus 65}

	currentColorCodePri	OBJECT-TYPE
		SYNTAX		INTEGER {
					none(0),
					primary(1),
					secondary(2),
					tertiary(3)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current priority of the Registered color code"
		::={whispSmStatus 66}

	currentChanFreq	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The Current Channel Frequency of the AP/BHM when in session."
		::={whispSmStatus 67}

	linkQualityBeacon	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering only.
                        Link Quality for incoming beacons.
                        For Gen II OFDM radios and forward.
                        For PMP 450 and forward this is vertical path."
		::={whispSmStatus 68}

	dhcpServerPktXmt	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of packets transmitted by SM DHCP Server"
		::={whispSmStatus 72}

	dhcpServerPktRcv	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of packets received by SM DHCP Server"
		::={whispSmStatus 73}

	dhcpServerPktToss	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of packets tossed by SM DHCP Server"
		::={whispSmStatus 74}

	receiveFragmentsModulationPercentage	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            The percentage of recent fragments received at which modulation.
                            For Gen II OFDM only and forward."
		::={whispSmStatus 86}

	fragmentsReceived1XVertical	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 1x modulation.
                            For GenII OFDM only and forward.
                            For MIMO this is the vertical path."
		::={whispSmStatus 87}

	fragmentsReceived2XVertical	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                                Number of fragments received in 2x modulation.
                                For GenII OFDM only and forward.
                                For MIMO this is the vertical path."
		::={whispSmStatus 88}

	fragmentsReceived3XVertical	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                                Number of fragments received in 3x modulation.
                                For GenII OFDM only and forward.
                                For MIMO this is the vertical path."
		::={whispSmStatus 89}

	fragmentsReceived4XVertical	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                                Number of fragments received in 4x modulation.
                                For GenII OFDM only and forward.
                                For MIMO this is the vertical path."
		::={whispSmStatus 90}

	linkQualityData1XVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Link Quality for the data VC for QPSK modulation (1X).
                            For Gen II OFDM radios and forward only.
                            For MIMO this is the vertical path."
		::={whispSmStatus 91}

	linkQualityData2XVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Link Quality for the data VC for 16-QAM modulation (2X).
                            For Gen II OFDM radios and forward only.
                            For MIMO this is the vertical path."
		::={whispSmStatus 92}

	linkQualityData3XVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Link Quality for the data VC for 64-QAM modulation (3X).
                            For Gen II OFDM radios and forward only.
                            For MIMO this is the vertical path."
		::={whispSmStatus 93}

	linkQualityData4XVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Link Quality for the data VC for 256-QAM modulation (4X).
                            For Gen II OFDM radios and forward only.
                            For MIMO this is the vertical path."
		::={whispSmStatus 94}

	signalToNoiseRatioSMVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"An estimated signal to noise ratio based on the last received data.
                                For GenII OFDM only and forward.
                                For MIMO this is the vertical antenna.
                                Will return zero if Signal to Noise Ratio Calculation is disabled."
		::={whispSmStatus 95}

	rfStatTxSuppressionCount	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"RF Scheduler Stats DFS TX Suppression Count"
		::={whispSmStatus 96}

	bridgecbUplinkCreditRate	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Sustained uplink data rate."
		::={whispSmStatus 97}

	bridgecbUplinkCreditLimit	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Uplink Burst Allocation."
		::={whispSmStatus 98}

	bridgecbDownlinkCreditRate	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Sustained uplink data rate."
		::={whispSmStatus 99}

	bridgecbDownlinkCreditLimit	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Uplink Burst Allocation."
		::={whispSmStatus 100}

	mimoQpskBerDisplay	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"QPSK BER statistics.
                            MIMO platforms only."
		::={whispSmStatus 101}

	mimo16QamBerDisplay	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"16-QAM BER statistics
                            MIMO platforms only.
                            Engineering use only."
		::={whispSmStatus 102}

	mimo64QamBerDisplay	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"64-QAM BER statistics
                            MIMO platforms only.
                            Engineering use only."
		::={whispSmStatus 103}

	mimo256QamBerDisplay	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"256-QAM BER statistics
                            MIMO platforms only.
                            Engineering use only."
		::={whispSmStatus 104}

	mimoBerRcvModulationType	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Receive modulation type.
                            MIMO platforms only."
		::={whispSmStatus 105}

	signalToNoiseRatioSMHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"An estimated signal to noise ratio based on the last received data for horizontal antenna.
                                MIMO radios only.
                                Will return zero if Signal to Noise Ratio Calculation is disabled.
                                When operating in MIMO-A will return 0."
		::={whispSmStatus 106}

	maxRadioDbmDeprecated	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		deprecated
		DESCRIPTION		
			"This OID was inadvertently moved in 12.0.2.  Please use maxRadioDbm.  This OID is deprecated
                             and kept for backwards compatibility."
		::={whispSmStatus 107}

	signalStrengthRatio	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) -
                                power received by the horizontal antenna input (dB).
                                MIMO radios only."
		::={whispSmStatus 108}

	fragmentsReceived1XHorizontal	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 1x modulation.
                            For MIMO radios only.
                            For MIMO this is the horizontal path.
                            Fragments received in MIMO-A will only be counted on vertical."
		::={whispSmStatus 109}

	fragmentsReceived2XHorizontal	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 2x modulation.
                            For MIMO radios only.
                            For MIMO this is the horizontal path.
                            Fragments received in MIMO-A will only be counted on vertical."
		::={whispSmStatus 110}

	fragmentsReceived3XHorizontal	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 3x modulation.
                            For MIMO radios only.
                            For MIMO this is the horizontal path.
                            Fragments received in MIMO-A will only be counted on vertical."
		::={whispSmStatus 111}

	fragmentsReceived4XHorizontal	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 4x modulation.
                            For MIMO radios only.
                            For MIMO this is the horizontal path.
                            Fragments received in MIMO-A will only be counted on vertical."
		::={whispSmStatus 112}

	linkQualityData1XHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Link Quality for the data VC for QPSK modulation (1X).
                            For MIMO radios only.
                            For MIMO this is the horizontal path.
                            Fragments received in MIMO-A will only be counted on vertical."
		::={whispSmStatus 113}

	linkQualityData2XHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Link Quality for the data VC for 16-QAM modulation (2X).
                            For MIMO radios only.
                            For MIMO this is the horizontal path.
                            Fragments received in MIMO-A will only be counted on vertical."
		::={whispSmStatus 114}

	linkQualityData3XHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Link Quality for the data VC for 64-QAM modulation (3X).
                            For MIMO radios only.
                            For MIMO this is the horizontal path.
                            Fragments received in MIMO-A will only be counted on vertical."
		::={whispSmStatus 115}

	linkQualityData4XHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Link Quality for the data VC for 256-QAM modulation (4X).
                            For MIMO radios only.
                            For MIMO this is the horizontal path.
                            Fragments received in MIMO-A will only be counted on vertical."
		::={whispSmStatus 116}

	radioDbmHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Receive power level of the horizontal antenna in dBm.
                                MIMO radios only."
		::={whispSmStatus 117}

	radioDbmVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Receive power level of the vertical antenna in dBm.
                                MIMO radios only."
		::={whispSmStatus 118}

	bridgecbDownlinkMaxBurstBitRate	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Maximum burst downlink rate."
		::={whispSmStatus 119}

	bridgecbUplinkMaxBurstBitRate	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Maximum burst uplink Rate."
		::={whispSmStatus 120}

	currentCyclicPrefix	OBJECT-TYPE
		SYNTAX		INTEGER {
					one-quarter(0),
					one-eighth(1),
					one-sixteenth(2)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The Current Cyclic Prefix of the AP/BHM when in session."
		::={whispSmStatus 121}

	currentBandwidth	OBJECT-TYPE
		SYNTAX		INTEGER {
					bandwidth5mhz(1),
					bandwidth7MHz(2),
					bandwidth10mhz(3),
					bandwidth15mhz(4),
					bandwidth20mhz(5),
					bandwidth30mhz(6),
					bandwidth40MHz(7)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The Current Bandwidth of the AP/BHM when in session."
		::={whispSmStatus 122}

	berPwrRxFPGAPathA	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"BER power level on FPGA Rx Path A of SM.  Engineering Use Only."
		::={whispSmStatus 123}

	berPwrRxFPGAPathB	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"BER power level on FPGA Rx Path B of SM.  Engineering Use Only."
		::={whispSmStatus 124}

	rawBERPwrRxPathA	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Raw unadjusted BER power level on FPGA Rx Path A of SM.  Engineering Use Only."
		::={whispSmStatus 125}

	rawBERPwrRxPathB	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Raw unadjusted BER power level on FPGA Rx Path B of SM.  Engineering Use Only."
		::={whispSmStatus 126}

	radioModeStatus	OBJECT-TYPE
		SYNTAX		INTEGER {
					undefined(0),
					pmp430(1),
					pmp450Interoperability(2)}
		MAX-ACCESS	read-only
		STATUS		deprecated
		DESCRIPTION		
			"The current radio mode that SM is operating in.
                        PMP 430 SMs only.
                        As of 14.2, the 430 SM only supports PMP 450
                        interoperability mode, so this will only return
                        pmp450Interoperability."
		::={whispSmStatus 127}

	adaptRateLowPri	OBJECT-TYPE
		SYNTAX		INTEGER {
					noSession(0),
					rate1X(1),
					rate2X(2),
					rete3X(3),
					rate4X(4),
					rate6X(6),
					rate8X(8)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current transmitting rate of the low priority VC.
                            0 : SM is not in session
                            1 : 1X QPSK SISO
                            2 : 2X 16-QAM SISO or QPSK MIMO
                            3 : 3X 64-QAM SISO
                            4 : 4X 256-QAM SISO or 16-QAM MIMO
                            6 : 6X 64-QAM MIMO
                            8 : 8X 256-QAM MIMO"
		::={whispSmStatus 128}

	adaptRateHighPri	OBJECT-TYPE
		SYNTAX		INTEGER {
					noHighPriorityChannel(-1),
					noSession(0),
					rate1X(1),
					rate2X(2),
					rete3X(3),
					rate4X(4),
					rate6X(6),
					rate8X(8)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current transmitting rate of the high priority VC.
                            -1 : High Priority Channel not configured
                            0 : SM is not in session
                            1 : 1X QPSK SISO
                            2 : 2X 16-QAM SISO or QPSK MIMO
                            3 : 3X 64-QAM SISO
                            4 : 4X 256-QAM SISO or 16-QAM MIMO
                            6 : 6X 64-QAM MIMO
                            8 : 8X 256-QAM MIMO"
		::={whispSmStatus 129}

	bitErrorsQSPKpathA	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors received from BER packet at QPSK path A.
                            Valid MIMO platforms only."
		::={whispSmStatus 130}

	bitErrorsQSPKpathB	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors received from BER packet at QPSK path B.
                            Valid MIMO platforms only."
		::={whispSmStatus 131}

	bitErrors16QAMpathA	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors received from BER packet at 16-QAM path A.
                            Valid MIMO platforms only.
                            Engineering use only."
		::={whispSmStatus 132}

	bitErrors16QAMpathB	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors received from BER packet at 16-QAM path B.
                            Valid MIMO platforms only.
                            Engineering use only."
		::={whispSmStatus 133}

	bitErrors64QAMpathA	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors received from BER packet at 64-QAM path A.
                            Valid MIMO platforms only.
                            Engineering use only."
		::={whispSmStatus 134}

	bitErrors64QAMpathB	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors received from BER packet at 64-QAM path B.
                            Valid MIMO platforms only.
                            Engineering use only."
		::={whispSmStatus 135}

	bitErrors256QAMpathA	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors received from BER packet at 256-QAM path A.
                            Valid MIMO platforms only.
                            Engineering use only."
		::={whispSmStatus 136}

	bitErrors256QAMpathB	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors received from BER packet at 256-QAM path B.
                            Valid MIMO platforms only.
                            Engineering use only."
		::={whispSmStatus 137}

	bitsReceivedPerPathModulation	OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit received from BER.
                            To calculate Bit Error Rate, take bit errors at a modulation and path and divide by this OID.
                            To get combined BER add errors and divide by this multiplied by each path and modulation.
                            i.e. MIMO QPSK combined BER = ((errors on path A) + (errors on path B))/(bits recieved per path modulation * 2)
                            Valid MIMO platforms only."
		::={whispSmStatus 138}

	beaconsPercentReceived	OBJECT-TYPE
		SYNTAX		INTEGER (0..100)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current percentage of beacons that the SM/BHS successfully receiving."
		::={whispSmStatus 139}

	mapsPercentReceived	OBJECT-TYPE
		SYNTAX		INTEGER (0..100)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PMP 450 only.
                            The current percentage of scheduling maps that the SM/BHS successfully receiving."
		::={whispSmStatus 140}

	natTslTableEntries	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of Entries in NAT Translation Table."
		::={whispSmStatus 141}

	maxReceivePower	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Maximum receive power level for this session.
            					MIMO radios only."
		::={whispSmStatus 142}

	beaconsPercentMinReceived	OBJECT-TYPE
		SYNTAX		INTEGER (0..100)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The percentage of the least number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes."
		::={whispSmStatus 143}

	beaconsPercentMaxReceived	OBJECT-TYPE
		SYNTAX		INTEGER (0..100)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The percentage of the maximum number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes."
		::={whispSmStatus 144}

	beaconsPercentReceivedSnapshot	OBJECT-TYPE
		SYNTAX		INTEGER (0..100)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The percentage of beacons that the SM/BHS successfully received for the last 15 minutes. This will be updated only once in 15 minutes."
		::={whispSmStatus 145}

	smSectorID	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current Sector ID of the Registered AP/BHM. 
                 			A value of -1 is return when the device is not registered or AP/BHM does not support Sector ID."
		::={whispSmStatus 146}

	scanCycleCount	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of scan cycles.  This increments after the SM completes scanning every configured frequency and channel bandwidth."
		::={whispSmStatus 147}

	bridgeCbErrStatBridgeDropCount	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Packet drop count for hosts with MAC address not in bridge table"
		::={whispSmStatus 148}

	dhcpServerTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF DhcpServerEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"The table of DHCP server hosts."
		::= {whispSmStatus 19}

	dhcpServerEntry OBJECT-TYPE
		SYNTAX		DhcpServerEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Entry of DHCP server hosts."
		INDEX		{hostIp}
		::= {dhcpServerTable 1}

		DhcpServerEntry ::= SEQUENCE{
			hostIp		IpAddress,
			hostMacAddress		PhysAddress,
			hostLease	TimeTicks
			}

	hostIp	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"DHCP server IP address."
		::={dhcpServerEntry 1}

	hostMacAddress	OBJECT-TYPE
		SYNTAX		PhysAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Private host MAC address."
		::={dhcpServerEntry 2}

	hostLease	OBJECT-TYPE
		SYNTAX		TimeTicks
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Lease time assigned by DHCP server host."
		::={dhcpServerEntry 3}

	whispSmConfigGroup	OBJECT-GROUP
			OBJECTS {
					rfScanListBandFilter,
					rfScanList,
					powerUpMode,
					lanIpSm,
					lanMaskSm,
					defaultGwSm,
					networkAccess,
					authKeySm,
					enable8023link,
					authKeyOption,
					timingPulseGated,
					naptPrivateIP,
					naptPrivateSubnetMask,
					naptPublicIP,
					naptPublicSubnetMask,
					naptPublicGatewayIP,
					naptRFPublicIP,
					naptRFPublicSubnetMask,
					naptRFPublicGateway,
					naptEnable,
					arpCacheTimeout,
					tcpGarbageCollectTmout,
					udpGarbageCollectTmout,
					natTslTableSize,
					dhcpClientEnable,
					dhcpServerEnable,
					dhcpServerLeaseTime,
					dhcpIPStart,
					dnsAutomatic,
					prefferedDNSIP,
					alternateDNSIP,
					natDNSProxyEnable,
					spectrumAnalysisDisplay,
					dmzIP,
					dmzEnable,
					dhcpNumIPsToLease,
					pppoeFilter,
					smbFilter,
					snmpFilter,
					userP1Filter,
					userP2Filter,
					userP3Filter,
					allOtherIpFilter,
					allIpv4Filter,
					upLinkBCastFilter,
					arpFilter,
					allOthersFilter,
					userDefinedPort1,
					port1TCPFilter,
					port1UDPFilter,
					userDefinedPort2,
					port2TCPFilter,
					port2UDPFilter,
					userDefinedPort3,
					port3TCPFilter,
					port3UDPFilter,
					bootpcFilter,
					bootpsFilter,
					ip4MultFilter,
					ingressVID,
					ingressVIDPriority,
					ingressVIDPriorityMode,
					providerVIDPriority,
					providerVIDPriorityMode,
					lowPriorityUplinkCIR,
					lowPriorityDownlinkCIR,
					hiPriorityChannel,
					hiPriorityUplinkCIR,
					hiPriorityDownlinkCIR,
					smRateAdapt,
					upLnkMaxBurstDataRate,
					upLnkDataRate,
					upLnkLimit,
					dwnLnkMaxBurstDataRate,
					cyclicPrefixScan,
					bandwidthScan,
					apSelection,
					radioBandscanConfig,
					forcepoweradjust,
					clearBerrResults,
					berrautoupdateflag,
					testSMBER,
					dwnLnkDataRate,
					dwnLnkLimit,
					dfsConfig,
					ethAccessFilterEnable,
					ipAccessFilterEnable,
					allowedIPAccess1,
					allowedIPAccess2,
					allowedIPAccess3,
					allowedIPAccessNMLength1,
					allowedIPAccessNMLength2,
					allowedIPAccessNMLength3,
					rfDhcpState,
					bCastMIR,
					bhsReReg,
					smLEDModeFlag,
					ethAccessEnable,
					pppoeEnable,
					pppoeAuthenticationType,
					pppoeAccessConcentrator,
					pppoeServiceName,
					pppoeUserName,
					pppoePassword,
					pppoeTCPMSSClampEnable,
					pppoeMTUOverrideEnable,
					pppoeMTUOverrideValue,
					pppoeTimerType,
					pppoeTimeoutPeriod,
					timedSpectrumAnalysisDuration,
					spectrumAnalysisScanBandwidth,
					spectrumAnalysisOnBoot,
					spectrumAnalysisAction,
					pppoeConnectOD,
					pppoeDisconnectOD,
					smAntennaType,
					natConnectionType,
					wanPingReplyEnable,
					packetFilterDirection,
					colorCode2,
					colorCodepriority2,
					colorCode3,
					colorCodepriority3,
					colorCode4,
					colorCodepriority4,
					colorCode5,
					colorCodepriority5,
					colorCode6,
					colorCodepriority6,
					colorCode7,
					colorCodepriority7,
					colorCode8,
					colorCodepriority8,
					colorCode9,
					colorCodepriority9,
					colorCode10,
					colorCodepriority10,
					additionalColorCode,
					additionalColorCodePriority,
					deleteAdditionalColorCode,
					bridgeTableSize,
					bridgeTableRestrict,
					berDeModSelect,
					multicastVCRcvRate,
					syslogServerApPreferred,
					syslogMinLevelApPreferred,
					syslogSMXmitSetting,
					syslogSMXmitControl,
					bCastMIRUnits,
					naptRemoteManage,
					maxTxPowerEnable,
					maxTxPower,
					txPowerControl,
					eapPeerAAAServerCommonName,
					pmp430ApRegistrationOptions,
					switchRadioModeAndReboot}
		STATUS		current
		DESCRIPTION
			"Canopy Subscriber Module configuration group."
		::= {whispSmGroups 1}

	whispSmStatusGroup	OBJECT-GROUP
			OBJECTS {
					natTslTableEntries,
					sessionStatus,
					rssi,
					jitter,
					airDelay,
					radioSlicingSm,
					radioTxGainSm,
					calibrationStatus,
					radioDbm,
					registeredToAp,
					dhcpCip,
					dhcpSip,
					dhcpClientLease,
					dhcpCSMask,
					dhcpDfltRterIP,
					dhcpcdns1,
					dhcpcdns2,
					dhcpcdns3,
					dhcpDomName,
					adaptRate,
					adaptRateLowPri,
					adaptRateHighPri,
					bitErrorsQSPKpathA,
					bitErrorsQSPKpathB,
					bitErrors16QAMpathA,
					bitErrors16QAMpathB,
					bitErrors64QAMpathA,
					bitErrors64QAMpathB,
					bitErrors256QAMpathA,
					bitErrors256QAMpathB,
					bitsReceivedPerPathModulation,
					radioDbmInt,
					dfsStatus,
					radioTxPwr,
					activeRegion,
					snmpBerLevel,
					nbBitsRcvd,
					nbPriBitsErr,
					nbSndBitsErr,
					primaryBER,
					secondaryBER,
					totalBER,
					minRSSI,
					maxRSSI,
					minJitter,
					maxJitter,
					smSessionTimer,
					pppoeSessionStatus,
					pppoeSessionID,
					pppoeIPCPAddress,
					pppoeMTUOverrideEn,
					pppoeMTUValue,
					pppoeTimerTypeValue,
					pppoeTimeoutValue,
					pppoeDNSServer1,
					pppoeDNSServer2,
					pppoeControlBytesSent,
					pppoeControlBytesReceived,
					pppoeDataBytesSent,
					pppoeDataBytesReceived,
					pppoeEnabledStatus,
					pppoeTCPMSSClampEnableStatus,
					pppoeACNameStatus,
					pppoeSvcNameStatus,
					pppoeSessUptime,
					primaryBERDisplay,
					secondaryBERDisplay,
					totalBERDisplay,
					mimoQpskBerDisplay,
					mimo16QamBerDisplay,
					mimo64QamBerDisplay,
					mimo256QamBerDisplay,
					mimoBerRcvModulationType,
					minRadioDbm,
					maxRadioDbm,
					maxRadioDbmDeprecated,
					pppoeSessIdleTime,
					radioDbmAvg,
					zoltarFPGAFreqOffset,
					zoltarSWFreqOffset,
					airDelayns,
					smSectorID,
					scanCycleCount,
					currentColorCode,
					currentColorCodePri,
					currentChanFreq,
					linkQualityBeacon,
					currentCyclicPrefix,
					currentBandwidth,
					berPwrRxFPGAPathA,
					berPwrRxFPGAPathB,
					rawBERPwrRxPathA,
					rawBERPwrRxPathB,
					linkQualityData1XVertical,
					linkQualityData2XVertical,
					linkQualityData3XVertical,
					linkQualityData4XVertical,
					linkQualityData1XHorizontal,
					linkQualityData2XHorizontal,
					linkQualityData3XHorizontal,
					linkQualityData4XHorizontal,
					signalToNoiseRatioSMVertical,
					signalToNoiseRatioSMHorizontal,
					signalStrengthRatio,
					radioDbmHorizontal,
					radioDbmVertical,
					rfStatTxSuppressionCount,
					receiveFragmentsModulationPercentage,
					fragmentsReceived1XVertical,
					fragmentsReceived2XVertical,
					fragmentsReceived3XVertical,
					fragmentsReceived4XVertical,
					fragmentsReceived1XHorizontal,
					fragmentsReceived2XHorizontal,
					fragmentsReceived3XHorizontal,
					fragmentsReceived4XHorizontal,
					beaconsPercentReceived,
					mapsPercentReceived,
					beaconsPercentMinReceived,
					beaconsPercentMaxReceived,
					beaconsPercentReceivedSnapshot,
					maxReceivePower,
					bridgecbUplinkCreditRate,
					bridgecbUplinkCreditLimit,
					bridgecbDownlinkCreditRate,
					bridgecbDownlinkCreditLimit,
					bridgecbDownlinkMaxBurstBitRate,
					bridgecbUplinkMaxBurstBitRate,
					bridgeCbErrStatBridgeDropCount,
					radioModeStatus}
		STATUS		current
		DESCRIPTION
			"Canopy Subscriber Module status group."
		::= {whispSmGroups 2}

	whispSmNotifGroup	NOTIFICATION-GROUP
			NOTIFICATIONS {
					enterSpectrumAnalysis,
					availableSpectrumAnalysis,
					whispRadarDetected,
					whispRadarEnd,
					smNatWanDHCPClientEvent,
					smNatRFPubDHCPClientEvent}
		STATUS		current
		DESCRIPTION
			"WHiSP SMs notification group."
		::= {whispSmGroups 3}

	whispMappingTableGroup	OBJECT-GROUP
			OBJECTS {
					tableIndex,
					protocol,
					port,
					localIp}
		STATUS		current
		DESCRIPTION
			"Canopy SM NAT port mapping Table group."
		::= {whispSmGroups 4}

-- DFS events

	whispRadarDetected	NOTIFICATION-TYPE
		OBJECTS {
					dfsStatus,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Radar detected transmit stopped."
		::={whispSmDfsEvent 1}

	whispRadarEnd	NOTIFICATION-TYPE
		OBJECTS {
					dfsStatus,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Radar ended back to normal transmit."
		::={whispSmDfsEvent 2}

-- Spectrum Analysis Events

	enterSpectrumAnalysis	NOTIFICATION-TYPE
		OBJECTS {
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Entering spectrum analysis.
                            physAddress - MAC address of the SM"
		::={whispSmSpAnEvent 1}

-- Spectrum Analysis Events

	availableSpectrumAnalysis	NOTIFICATION-TYPE
		OBJECTS {
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Spectrum analysis is complete, SM is re-registered with AP and results are available.
                            physAddress - MAC address of the SM"
		::={whispSmSpAnEvent 2}

-- SM NAT WAN DHCP Client Event

	smNatWanDHCPClientEvent	NOTIFICATION-TYPE
		OBJECTS {
					dhcpCip,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"NAT WAN DHCP Client has received a new address via DHCP."
		::={whispSmDHCPClientEvent 1}

-- SM NAT RF Public DHCP Client Event

	smNatRFPubDHCPClientEvent	NOTIFICATION-TYPE
		OBJECTS {
					dhcpRfPublicIp,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"NAT RF Public DHCP Client has received a new address via DHCP."
		::={whispSmDHCPClientEvent 2}

	clearLinkStats	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Setting this to a nonzero value will clear the link stats."
		::={whispSmControls 1}

	rescan	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Setting this to a nonzero value will start the rescan.
                        Warning: If currently connected, this will cause the SM/BHS to drop session"
		::={whispSmControls 2}

	apEvalControl	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Setting this to 0 will clear the AP Evaluation Data."
		::={whispSmControls 3}

	whispMappingTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF WhispMappingEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"NAT port mapping information table."
		::= {whispSm 5}

	whispMappingEntry OBJECT-TYPE
		SYNTAX		WhispMappingEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Mapping table entry."
		INDEX		{tableIndex}
		::= {whispMappingTable 1}

		WhispMappingEntry ::= SEQUENCE{
			tableIndex		INTEGER,
			protocol		INTEGER,
			port		INTEGER,
			localIp	IpAddress
			}

	tableIndex	OBJECT-TYPE
		SYNTAX		INTEGER (1..2147483647)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"User information table index."
		::={whispMappingEntry 1}

	protocol	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Protocol type: 0:both UDP and TCP, 1:UDP, 2:TCP."
		::={whispMappingEntry 2}

	port	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Application port number. e.g. 23=telnet, 21=ftp etc. Should be a positive integer."
		::={whispMappingEntry 3}

	localIp	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"IP of local host to which the incoming packet mapped to an application should be forwarded."
		::={whispMappingEntry 4}

	whispSmTranslationTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF WhispSmTranslationTableEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Translation Table."
		::= {whispSm 6}

	whispSmTranslationTableEntry OBJECT-TYPE
		SYNTAX		WhispSmTranslationTableEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Translation Table Entry."
		INDEX		{whispTranslationTableIndex}
		::= {whispSmTranslationTable 1}

		WhispSmTranslationTableEntry ::= SEQUENCE{
			whispTranslationTableIndex		INTEGER,
			whispTranslationTableMacAddr		MacAddress,
			whispTranslationTableIpAddr		IpAddress,
			whispTranslationTableAge	Counter32
			}

	whispTranslationTableIndex	OBJECT-TYPE
		SYNTAX		INTEGER (1..127)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Index into translation table."
		::={whispSmTranslationTableEntry 1}

	whispTranslationTableMacAddr	OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"MAC Address of the registered entity."
		::={whispSmTranslationTableEntry 2}

	whispTranslationTableIpAddr	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Ip Address of the registered entity."
		::={whispSmTranslationTableEntry 3}

	whispTranslationTableAge	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Age of the registered entity."
		::={whispSmTranslationTableEntry 4}

	whispSmColorCodeTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF WhispSmColorCodeEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Additional color code Table."
		::= {whispSm 9}

	whispSmColorCodeEntry OBJECT-TYPE
		SYNTAX		WhispSmColorCodeEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Additional Color code Entry."
		INDEX		{entryColorCode}
		::= {whispSmColorCodeTable 1}

		WhispSmColorCodeEntry ::= SEQUENCE{
			entryColorCode		INTEGER,
			entryColorCodePriority	INTEGER
			}

	entryColorCode	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"color code."
		::={whispSmColorCodeEntry 1}

	entryColorCodePriority	OBJECT-TYPE
		SYNTAX		INTEGER {
					primary(1),
					secondary(2),
					tertiary(3)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"color code priority."
		::={whispSmColorCodeEntry 2}

	whispSmAPEvalTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF WhispSmAPEvalEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"AP Eval List."
		::= {whispSm 10}

	whispSmAPEvalEntry OBJECT-TYPE
		SYNTAX		WhispSmAPEvalEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Evaluation of AP and BHM Entries"
		INDEX		{evalIndex}
		::= {whispSmAPEvalTable 1}

		WhispSmAPEvalEntry ::= SEQUENCE{
			evalIndex		INTEGER,
			evalFrequency		INTEGER,
			evalChannelBandwidth		INTEGER,
			evalCyclicPrefix		INTEGER,
			evalESN		PhysAddress,
			evalRegion		DisplayString,
			evalBeaconReceivePowerCombined		INTEGER,
			evalBeaconReceivePowerH		INTEGER,
			evalBeaconReceivePowerV		INTEGER,
			evalFECEnable		INTEGER,
			evalType		INTEGER,
			evalAvail		INTEGER,
			evalAge		INTEGER,
			evalLockout		INTEGER,
			evalRegFail		INTEGER,
			evalRange		INTEGER,
			evalMaxRange		INTEGER,
			evalTxBER		INTEGER,
			evalEBCast		INTEGER,
			evalSessionCount		INTEGER,
			evalNoLuid		INTEGER,
			evalOutOfRange		INTEGER,
			evalAuthFail		INTEGER,
			evalEncryptFail		INTEGER,
			evalReScanReq		INTEGER,
			evalLimitReached		INTEGER,
			evalNoVCs		INTEGER,
			evalVCReserveFail		INTEGER,
			evalVCActFail		INTEGER,
			evalTxPower		INTEGER,
			evalReceiveTargetLevel		INTEGER,
			evalColorCode		INTEGER,
			evalBeaconVersion		INTEGER,
			evalSectorUserCount		INTEGER,
			evalSyncSrc		INTEGER,
			evalNumULSlots		INTEGER,
			evalNumDLSlots		INTEGER,
			evalNumULContSlots		INTEGER,
			evalICC		INTEGER,
			evalAuthentication		INTEGER,
			evalSMPPPoE		INTEGER,
			evalPToPVLAN		INTEGER,
			evalFramePeriod	INTEGER
			}

	evalIndex	OBJECT-TYPE
		SYNTAX		INTEGER (1..16)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Index of the radio seen in the scan"
		::={whispSmAPEvalEntry 1}

	evalFrequency	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Transmit Frequency in KHz"
		::={whispSmAPEvalEntry 2}

	evalChannelBandwidth	OBJECT-TYPE
		SYNTAX		INTEGER {
					bandwidth3Point5MHz(0),
					bandwidth5MHz(1),
					bandwidth7MHz(2),
					bandwidth10MHz(3),
					bandwidth15MHz(4),
					bandwidth20MHz(5),
					bandwidth30MHz(6),
					bandwidth40MHz(7)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Channel Bandwidth"
		::={whispSmAPEvalEntry 3}

	evalCyclicPrefix	OBJECT-TYPE
		SYNTAX		INTEGER {
					one-quarter(0),
					one-eighth(1),
					one-sixteenth(2)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Cyclic Prefix value, for OFDM Radios only."
		::={whispSmAPEvalEntry 4}

	evalESN	OBJECT-TYPE
		SYNTAX		PhysAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Radio ESN"
		::={whispSmAPEvalEntry 5}

	evalRegion	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Region"
		::={whispSmAPEvalEntry 6}

	evalBeaconReceivePowerCombined	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Beacon Receive Power Combined in dBm(rounded to nearest integer)"
		::={whispSmAPEvalEntry 7}

	evalBeaconReceivePowerH	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Beacon Receive Power in dBm(rounded to nearest integer) for Path H(MIMO Radios only)"
		::={whispSmAPEvalEntry 8}

	evalBeaconReceivePowerV	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Beacon Receive Power in dBm(rounded to nearest integer) for Path V(MIMO Radios only)"
		::={whispSmAPEvalEntry 9}

	evalFECEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Forward Error Correction Enabled Status.
							Note, this is always enabled on 450 and forward."
		::={whispSmAPEvalEntry 10}

	evalType	OBJECT-TYPE
		SYNTAX		INTEGER {
					multipoint(0),
					point-to-point(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Radio Type (Point-to-Point or Multipoint)"
		::={whispSmAPEvalEntry 11}

	evalAvail	OBJECT-TYPE
		SYNTAX		INTEGER {
					false(0),
					true(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Returns True if seen on the previous SM's scan"
		::={whispSmAPEvalEntry 12}

	evalAge	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of minutes since index was last seen"
		::={whispSmAPEvalEntry 13}

	evalLockout	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of minutes radio is currently locked out"
		::={whispSmAPEvalEntry 14}

	evalRegFail	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Registration Fail Count"
		::={whispSmAPEvalEntry 15}

	evalRange	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Range in feet"
		::={whispSmAPEvalEntry 16}

	evalMaxRange	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Max Range is in miles"
		::={whispSmAPEvalEntry 17}

	evalTxBER	OBJECT-TYPE
		SYNTAX		INTEGER {
					false(0),
					true(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Radio is transmitting Bit Error Rate symbol or not
							Note: This is always enabled on 450 and forward"
		::={whispSmAPEvalEntry 18}

	evalEBCast	OBJECT-TYPE
		SYNTAX		INTEGER {
					false(0),
					true(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Broadcast Encryption status"
		::={whispSmAPEvalEntry 19}

	evalSessionCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Session Count"
		::={whispSmAPEvalEntry 20}

	evalNoLuid	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of times the registration request has been rejected due to No Luid"
		::={whispSmAPEvalEntry 21}

	evalOutOfRange	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of times the registration request has been rejected due to out of range"
		::={whispSmAPEvalEntry 22}

	evalAuthFail	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of times the registration request has been rejected due to authentication failure"
		::={whispSmAPEvalEntry 23}

	evalEncryptFail	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of times the registration request has been rejected due to encrypt fail"
		::={whispSmAPEvalEntry 24}

	evalReScanReq	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Rescan request count"
		::={whispSmAPEvalEntry 25}

	evalLimitReached	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of times failed when trying to register with an limited AP maxed out"
		::={whispSmAPEvalEntry 26}

	evalNoVCs	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of times the registration request has been rejected due to No VCs"
		::={whispSmAPEvalEntry 27}

	evalVCReserveFail	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of times the registration request has been rejected due to VC reserve fail"
		::={whispSmAPEvalEntry 28}

	evalVCActFail	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of times the registration request has been rejected due to VC activate fail"
		::={whispSmAPEvalEntry 29}

	evalTxPower	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Transmit Power in dBm"
		::={whispSmAPEvalEntry 30}

	evalReceiveTargetLevel	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Receive Target Level(in dBm)(PMP only)"
		::={whispSmAPEvalEntry 31}

	evalColorCode	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Color Code"
		::={whispSmAPEvalEntry 32}

	evalBeaconVersion	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Beacon Version"
		::={whispSmAPEvalEntry 33}

	evalSectorUserCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Sector User Count(AP only)"
		::={whispSmAPEvalEntry 34}

	evalSyncSrc	OBJECT-TYPE
		SYNTAX		INTEGER {
					generate-sync(0),
					gps-sync(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Sync Source(PMP only)"
		::={whispSmAPEvalEntry 35}

	evalNumULSlots	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of uplink slots"
		::={whispSmAPEvalEntry 36}

	evalNumDLSlots	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of downlink slots"
		::={whispSmAPEvalEntry 37}

	evalNumULContSlots	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of uplink contention slots(PMP only)"
		::={whispSmAPEvalEntry 38}

	evalICC	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Instalaton Color Code(PMP only)"
		::={whispSmAPEvalEntry 39}

	evalAuthentication	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Authentication Setting(PMP only)"
		::={whispSmAPEvalEntry 40}

	evalSMPPPoE	OBJECT-TYPE
		SYNTAX		INTEGER {
					not-supported(0),
					suported(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"SM PPPoE status(PMP only)"
		::={whispSmAPEvalEntry 41}

	evalPToPVLAN	OBJECT-TYPE
		SYNTAX		INTEGER {
					not-supported(0),
					suported(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"PToP VLAN"
		::={whispSmAPEvalEntry 42}

	evalFramePeriod	OBJECT-TYPE
		SYNTAX		INTEGER {
					twoPointFiveMs(0),
					fiveMs(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Frame Period"
		::={whispSmAPEvalEntry 43}


END