-- This file was included in Ciena MIB release MIBS-CIENA-CES-08-07-00-024 -- -- CIENA-CES-DHCP-RELAY-MIB.my -- CIENA-CES-DHCP-RELAY-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, TruthValue, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC cienaCesStatistics FROM CIENA-SMI; cienaCesDhcpRelayMIB MODULE-IDENTITY LAST-UPDATED "201706070000Z" ORGANIZATION "Ciena Corp." CONTACT-INFO " Mib Meister 7035 Ridge Road Hanover, Maryland 21076 USA Phone: +1 800 921 1144 Email: support@ciena.com" DESCRIPTION "The MIB module contains MIB objects to manage DHCP Relay." REVISION "201706070000Z" DESCRIPTION "Updated contact info." REVISION "201509090000Z" DESCRIPTION "Added new value to DhcpLiType: mplsVc(3). Added new value to cienaCesDhcpRelayAgentCircuitId: liVs(4). Added new value to cienaCesDhcpRelayAgentRemoteId: ridString(3). Added new objects: cienaCesDhcpRelayAgentReplaceOption82 cienaCesDhcpRelayAgentL2GlobalStatsClear cienaCesDhcpRelayAgentL2Relayed cienaCesDhcpRelayAgentL2Dropped cienaCesDhcpRelayAgentL2Forwarded cienaCesDhcpRelayAgentL2NotForRelay cienaCesDhcpRelayAgentCidString cienaCesDhcpRelayAgentRidString cienaCesDhcpRelayAgentL2InvalidConfigPktDrop cienaCesDhcpRelayAgentL2GeneralErrors cienaCesDhcpRelayAgentL2Option82Replaced cienaCesDhcpRelayAgentL2ForRelay cienaCesDhcpRelayAgentL2ClientRelayed cienaCesDhcpRelayAgentL2ServerRelayed" REVISION "201303050000Z" DESCRIPTION "Added port and cidString to cienaCesDhcpRelayAgentCircuitId." REVISION "201007220000Z" DESCRIPTION "Initial creation." ::= { cienaCesStatistics 6 } -- -- Node definitions -- cienaCesDhcpRelayAgent OBJECT IDENTIFIER ::= { cienaCesDhcpRelayMIB 1 } cienaCesDhcpRelayAgentGlobalAttrs OBJECT IDENTIFIER ::= { cienaCesDhcpRelayAgent 1 } cienaCesDhcpRelayAgentGlobalStats OBJECT IDENTIFIER ::= { cienaCesDhcpRelayAgent 7 } -- -- Textual convention -- DhcpLiType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Logical Interface Attachment Types." SYNTAX INTEGER { subPort(1), pbt-service(2), mplsVc(3), unknown(99) } -- -- DHCP Relay Agent Functionality -- cienaCesDhcpRelayAgentCircuitId OBJECT-TYPE SYNTAX INTEGER { li(1), port(2), cidString(3), liVs(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of circuit ID to be used by the DHCP relay agent. It can be set to li, port, cidString or liVs." ::= { cienaCesDhcpRelayAgentGlobalAttrs 1 } cienaCesDhcpRelayAgentRemoteId OBJECT-TYPE SYNTAX INTEGER { macAddress(1), hostName(2), ridString(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of remote agent ID to be used by the DHCP relay agent. It can be set to macAddress, hostName or ridString." ::= { cienaCesDhcpRelayAgentGlobalAttrs 2 } cienaCesDhcpRelayAgentL2State OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the global administrative state of the DHCP L2 relay agent." ::= { cienaCesDhcpRelayAgentGlobalAttrs 3 } cienaCesDhcpRelayAgentReplaceOption82 OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether or not the relay agent should replace an existing option 82." ::= { cienaCesDhcpRelayAgentGlobalAttrs 4 } -- -- DHCP Relay Agent Global Statistics -- cienaCesDhcpRelayAgentL2GlobalStatsClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when set to 'true', clears the global statistics for the L2 DHCP relay." ::= { cienaCesDhcpRelayAgentGlobalStats 1 } cienaCesDhcpRelayAgentL2Relayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the number of packets that passed through the L2 relays (processed and not dropped)." ::= { cienaCesDhcpRelayAgentGlobalStats 2 } cienaCesDhcpRelayAgentL2Dropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the number of packets dropped by the relay. Inspect the detailed statistic on each relay for more details related to dropped frames." ::= { cienaCesDhcpRelayAgentGlobalStats 3 } cienaCesDhcpRelayAgentL2Forwarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the number of packets forwarded rather than relayed. These are valid frames that didn't need to be processed by the relay." ::= { cienaCesDhcpRelayAgentGlobalStats 4 } cienaCesDhcpRelayAgentL2NotForRelay OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the number of packets received by the relay but not intended for the relay. Inspect the detailed statistic on each relay for more details related to dropped frames." ::= { cienaCesDhcpRelayAgentGlobalStats 5 } -- -- Table to control DHCP relay agent functionality on each L2 VS -- cienaCesDhcpRelayAgentL2StateTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesDhcpRelayAgentL2StateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tables that allow changing the configuration of DHCP relay agent functionality for each cienaCesDhcpRelayAgentVs." ::= { cienaCesDhcpRelayAgent 2 } cienaCesDhcpRelayAgentL2StateEntry OBJECT-TYPE SYNTAX CienaCesDhcpRelayAgentL2StateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in the table to configure DHCP relay agent functionality." INDEX { cienaCesDhcpRelayAgentVsIndex, cienaCesDhcpRelayAgentRlan } ::= { cienaCesDhcpRelayAgentL2StateTable 1 } CienaCesDhcpRelayAgentL2StateEntry ::= SEQUENCE { cienaCesDhcpRelayAgentVsIndex INTEGER, cienaCesDhcpRelayAgentRlan INTEGER, cienaCesDhcpRelayAgentL2AdminState INTEGER, cienaCesDhcpRelayAgentL2OperState INTEGER, cienaCesDhcpRelayAgentL2StatsClear TruthValue, cienaCesDhcpRelayAgentL2RowStatus RowStatus } cienaCesDhcpRelayAgentVsIndex OBJECT-TYPE SYNTAX INTEGER (1..1048575) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This MIB object specifies the VS on which DHCP relay agent is configured." ::= { cienaCesDhcpRelayAgentL2StateEntry 1 } cienaCesDhcpRelayAgentRlan OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This MIB object specifies the RLAN on which the DHCP relay agent is configured." ::= { cienaCesDhcpRelayAgentL2StateEntry 2 } cienaCesDhcpRelayAgentL2AdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows the disabling or enabling of DHCP relay agent functionality on the given VS." ::= { cienaCesDhcpRelayAgentL2StateEntry 3 } cienaCesDhcpRelayAgentL2OperState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the operational state of the DHCP relay agent on the given VS." ::= { cienaCesDhcpRelayAgentL2StateEntry 4 } cienaCesDhcpRelayAgentL2StatsClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB object when set to 'true' clears DHCP relay agent statistics for the given VS." ::= { cienaCesDhcpRelayAgentL2StateEntry 5 } cienaCesDhcpRelayAgentL2RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Set this MIB object to 'Destroy' to terminate DHCP L2 relaying on the VS specified by cienaCesDhcpRelayAgentVs and cienaCesDhcpRelayAgentRlan. Set this MIB object to 'CreateAndGo' to create DHCP L2 relaying on the VS along with cienaCesDhcpRelayAgentVsIndex and cienaCesDhcpRelayAgentRlan." ::= { cienaCesDhcpRelayAgentL2StateEntry 6 } -- -- DHCP Relay Agent Trust Table -- cienaCesDhcpRelayAgentTrustTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesDhcpRelayAgentTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to specify the DHCP relay attributes of logical interfaces to which DHCP relay agents are attached. Entries in this table are created when a DHCP relay agent is created and attached to a VS that already has logical interfaces, or when logical interfaces are added to a VS for which a DHCP relay is already created and attached." ::= { cienaCesDhcpRelayAgent 5 } cienaCesDhcpRelayAgentTrustEntry OBJECT-TYPE SYNTAX CienaCesDhcpRelayAgentTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table can be used to specify the LI and VS to be trusted." INDEX { cienaCesDhcpRelayAgentVsIndex, cienaCesDhcpRelayAgentRlan, cienaCesDhcpRelayAgentTrustedLiType, cienaCesDhcpRelayAgentTrustedLiIndex } ::= { cienaCesDhcpRelayAgentTrustTable 1 } CienaCesDhcpRelayAgentTrustEntry ::= SEQUENCE { cienaCesDhcpRelayAgentTrustedLiType DhcpLiType, cienaCesDhcpRelayAgentTrustedLiIndex INTEGER, cienaCesDhcpRelayAgentTrustMode INTEGER, cienaCesDhcpRelayAgentCidString DisplayString, cienaCesDhcpRelayAgentRidString DisplayString } cienaCesDhcpRelayAgentTrustedLiType OBJECT-TYPE SYNTAX DhcpLiType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This MIB object is used as an index in the table and is used to specify the LI type." ::= { cienaCesDhcpRelayAgentTrustEntry 1 } cienaCesDhcpRelayAgentTrustedLiIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This MIB object is used as an index in the table and is used to specify the LI index." ::= { cienaCesDhcpRelayAgentTrustEntry 2 } cienaCesDhcpRelayAgentTrustMode OBJECT-TYPE SYNTAX INTEGER { clientTrust(1), serverTrust(2), dualRoleTrust(3), unTrust(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB object is used to set the port as client trusted, server trusted, dual-role trusted or not trusted." ::= { cienaCesDhcpRelayAgentTrustEntry 3 } cienaCesDhcpRelayAgentCidString OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to get and set the CID string for the logical interface." ::= { cienaCesDhcpRelayAgentTrustEntry 4 } cienaCesDhcpRelayAgentRidString OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to get and set the RID string for the logical interface." ::= { cienaCesDhcpRelayAgentTrustEntry 5 } -- -- DHCP Relay Agent L2 Statistics -- cienaCesDhcpRelayAgentL2StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesDhcpRelayAgentL2StatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to display L2 statistics for each cienaCesDhcpRelayAgentVs." ::= { cienaCesDhcpRelayAgent 6 } cienaCesDhcpRelayAgentL2StatsEntry OBJECT-TYPE SYNTAX CienaCesDhcpRelayAgentL2StatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in the table to display L2 statistics." INDEX { cienaCesDhcpRelayAgentVsIndex, cienaCesDhcpRelayAgentRlan } ::= { cienaCesDhcpRelayAgentL2StatsTable 1 } CienaCesDhcpRelayAgentL2StatsEntry ::= SEQUENCE { cienaCesDhcpRelayAgentL2IpSecHeaders Counter32, cienaCesDhcpRelayAgentL2Option82Added Counter32, cienaCesDhcpRelayAgentL2Option82Removed Counter32, cienaCesDhcpRelayAgentL2UntrustedClientPortPktsRx Counter32, cienaCesDhcpRelayAgentL2UntrustedServerPortPktsRx Counter32, cienaCesDhcpRelayAgentL2SpoofedDhcpPkts Counter32, cienaCesDhcpRelayAgentL2Option82ExceedMTU Counter32, cienaCesDhcpRelayAgentL2NoTrustedServerPktDrop Counter32, cienaCesDhcpRelayAgentL2NoTrustedClientPktDrop Counter32, cienaCesDhcpRelayAgentL2InvalidConfigPktDrop Counter32, cienaCesDhcpRelayAgentL2GeneralErrors Counter32, cienaCesDhcpRelayAgentL2Option82Replaced Counter32, cienaCesDhcpRelayAgentL2ForRelay Counter32, cienaCesDhcpRelayAgentL2ClientRelayed Counter32, cienaCesDhcpRelayAgentL2ServerRelayed Counter32 } cienaCesDhcpRelayAgentL2IpSecHeaders OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of packets that include IP Sec headers." ::= { cienaCesDhcpRelayAgentL2StatsEntry 1 } cienaCesDhcpRelayAgentL2Option82Added OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of packets that have had option 82 added." ::= { cienaCesDhcpRelayAgentL2StatsEntry 2 } cienaCesDhcpRelayAgentL2Option82Removed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of packets that have had option 82 removed." ::= { cienaCesDhcpRelayAgentL2StatsEntry 3 } cienaCesDhcpRelayAgentL2UntrustedClientPortPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of packets received on untrusted client ports." ::= { cienaCesDhcpRelayAgentL2StatsEntry 4 } cienaCesDhcpRelayAgentL2UntrustedServerPortPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of packets received from untrusted server ports." ::= { cienaCesDhcpRelayAgentL2StatsEntry 5 } cienaCesDhcpRelayAgentL2SpoofedDhcpPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of spoofed DHCP packets." ::= { cienaCesDhcpRelayAgentL2StatsEntry 6 } cienaCesDhcpRelayAgentL2Option82ExceedMTU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of packets with DHCP option 82 that would exceed the MTU. The option 82 is not added and the original DHCP packet is forwarded." ::= { cienaCesDhcpRelayAgentL2StatsEntry 7 } cienaCesDhcpRelayAgentL2NoTrustedServerPktDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of DHCP packets dropped because there are no server trusted ports configured." ::= { cienaCesDhcpRelayAgentL2StatsEntry 8 } cienaCesDhcpRelayAgentL2NoTrustedClientPktDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of DHCP packets dropped because there are no client trusted ports configured." ::= { cienaCesDhcpRelayAgentL2StatsEntry 9 } cienaCesDhcpRelayAgentL2InvalidConfigPktDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of DHCP packets dropped because the L2 relay agent configuration is invalid." ::= { cienaCesDhcpRelayAgentL2StatsEntry 10 } cienaCesDhcpRelayAgentL2GeneralErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of general errors encountered by the L2 relay agent." ::= { cienaCesDhcpRelayAgentL2StatsEntry 11 } cienaCesDhcpRelayAgentL2Option82Replaced OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of packets that have had option 82 replaced." ::= { cienaCesDhcpRelayAgentL2StatsEntry 12 } cienaCesDhcpRelayAgentL2ForRelay OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of packets received by the relay that were actually intended for the relay." ::= { cienaCesDhcpRelayAgentL2StatsEntry 13 } cienaCesDhcpRelayAgentL2ClientRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of client messages relayed." ::= { cienaCesDhcpRelayAgentL2StatsEntry 14 } cienaCesDhcpRelayAgentL2ServerRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object reports the number of server messages relayed." ::= { cienaCesDhcpRelayAgentL2StatsEntry 15 } END -- -- CIENA-CES-DHCP-RELAY-MIB.my --