-- This file was automatically generated from ciena-ws-alarm.yang. Do not edit.

CIENA-WS-ALARM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    cienaWsConfig
        FROM CIENA-WS-MIB
    StringMaxl16, StringMaxl32, StringMaxl44
        FROM CIENA-WS-TYPEDEFS-MIB
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, TruthValue
        FROM SNMPv2-TC;

cienaWsAlarmMIB MODULE-IDENTITY
    LAST-UPDATED "201703140000Z"
    ORGANIZATION "Ciena Corporation"
    CONTACT-INFO "Web URL: http://www.ciena.com/
Postal:  7035 Ridge Road
        Hanover, Maryland 21076
        U.S.A.
Phone:   +1 800-921-1144
Fax:     +1 410-694-5750"
    DESCRIPTION "This module defines alarm data for the Waveserver."
    REVISION "201703140000Z"
    DESCRIPTION "Waveserver Release 1.4
Changed the maximum length of alarm description to 44.
Aligned MIB files to respect YANG read/write status."
    REVISION "201612120000Z"
    DESCRIPTION "Waveserver Rel 1.3 revision"
    REVISION "201606270000Z"
    DESCRIPTION "Waveserver Rel 1.2 revised.  
Restructuring of the module."
    REVISION "201505200000Z"
    DESCRIPTION "Initial version."
    ::= { cienaWsConfig 4 }

AlarmReason ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "None"
    SYNTAX INTEGER { reset(1), set(2), acknowledge(5), clear(6), delete(7), config(9) }

AlarmSeverity ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "None"
    SYNTAX INTEGER { cleared(1), critical(3), major(4), minor(5), warning(6), info(8) }

cwsAlarmActiveTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsAlarmActiveEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Active alarms"
    ::= { cienaWsAlarmMIB 3 }

cwsAlarmActiveEntry OBJECT-TYPE
    SYNTAX CwsAlarmActiveEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsAlarmActiveTable."
    INDEX { cwsAlarmActiveAlarmInstanceId }
    ::= { cwsAlarmActiveTable 1 }

CwsAlarmActiveEntry ::= SEQUENCE { 
    cwsAlarmActiveAlarmInstanceId Integer32,
    cwsAlarmActiveAcknowledged TruthValue,
    cwsAlarmActiveAlarmTableId Unsigned32,
    cwsAlarmActiveSeverity AlarmSeverity,
    cwsAlarmActiveLocalDateTime StringMaxl32,
    cwsAlarmActiveInstance StringMaxl32,
    cwsAlarmActiveDescription StringMaxl44,
    cwsAlarmActiveSiteIdentifier Unsigned32,
    cwsAlarmActiveGroupIdentifier Unsigned32,
    cwsAlarmActiveMemberIdentifier Unsigned32 
}

cwsAlarmActiveAlarmInstanceId OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "The alarm Instance ID"
    ::= { cwsAlarmActiveEntry 1 }

cwsAlarmActiveAcknowledged OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Alarm has been acknowledged."
    ::= { cwsAlarmActiveEntry 2 }

cwsAlarmActiveAlarmTableId OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm table ID."
    ::= { cwsAlarmActiveEntry 3 }

cwsAlarmActiveSeverity OBJECT-TYPE
    SYNTAX AlarmSeverity
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm severity."
    ::= { cwsAlarmActiveEntry 4 }

cwsAlarmActiveLocalDateTime OBJECT-TYPE
    SYNTAX StringMaxl32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The local date and time when alarm was raised."
    ::= { cwsAlarmActiveEntry 5 }

cwsAlarmActiveInstance OBJECT-TYPE
    SYNTAX StringMaxl32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The object instance the alarm is raised against."
    ::= { cwsAlarmActiveEntry 6 }

cwsAlarmActiveDescription OBJECT-TYPE
    SYNTAX StringMaxl44
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm description."
    ::= { cwsAlarmActiveEntry 7 }

cwsAlarmActiveSiteIdentifier OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "An integer to uniquely identify the site where this Waveserver is located."
    ::= { cwsAlarmActiveEntry 8 }

cwsAlarmActiveGroupIdentifier OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "An integer to uniquely identify a group of Waveservers within a site."
    ::= { cwsAlarmActiveEntry 9 }

cwsAlarmActiveMemberIdentifier OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "An integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently."
    ::= { cwsAlarmActiveEntry 10 }

cwsAlarmHistoryTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsAlarmHistoryEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Alarm history"
    ::= { cienaWsAlarmMIB 4 }

cwsAlarmHistoryEntry OBJECT-TYPE
    SYNTAX CwsAlarmHistoryEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsAlarmHistoryTable."
    INDEX { cwsAlarmHistoryHistoryId }
    ::= { cwsAlarmHistoryTable 1 }

CwsAlarmHistoryEntry ::= SEQUENCE { 
    cwsAlarmHistoryHistoryId Integer32,
    cwsAlarmHistoryReason AlarmReason,
    cwsAlarmHistoryAlarmInstanceId Unsigned32,
    cwsAlarmHistoryAlarmTableId Unsigned32,
    cwsAlarmHistorySeverity AlarmSeverity,
    cwsAlarmHistoryLocalDateTime StringMaxl32,
    cwsAlarmHistoryInstance StringMaxl32,
    cwsAlarmHistoryDescription StringMaxl44,
    cwsAlarmHistorySiteIdentifier Unsigned32,
    cwsAlarmHistoryGroupIdentifier Unsigned32,
    cwsAlarmHistoryMemberIdentifier Unsigned32 
}

cwsAlarmHistoryHistoryId OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "The alarm history ID"
    ::= { cwsAlarmHistoryEntry 1 }

cwsAlarmHistoryReason OBJECT-TYPE
    SYNTAX AlarmReason
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The reason for the alarm condition."
    ::= { cwsAlarmHistoryEntry 2 }

cwsAlarmHistoryAlarmInstanceId OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm instance ID."
    ::= { cwsAlarmHistoryEntry 3 }

cwsAlarmHistoryAlarmTableId OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm table ID."
    ::= { cwsAlarmHistoryEntry 4 }

cwsAlarmHistorySeverity OBJECT-TYPE
    SYNTAX AlarmSeverity
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm severity."
    ::= { cwsAlarmHistoryEntry 5 }

cwsAlarmHistoryLocalDateTime OBJECT-TYPE
    SYNTAX StringMaxl32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The local date and time when alarm was raised."
    ::= { cwsAlarmHistoryEntry 6 }

cwsAlarmHistoryInstance OBJECT-TYPE
    SYNTAX StringMaxl32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The object instance the alarm is raised against."
    ::= { cwsAlarmHistoryEntry 7 }

cwsAlarmHistoryDescription OBJECT-TYPE
    SYNTAX StringMaxl44
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm description."
    ::= { cwsAlarmHistoryEntry 8 }

cwsAlarmHistorySiteIdentifier OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "An integer to uniquely identify the site where this Waveserver is located."
    ::= { cwsAlarmHistoryEntry 9 }

cwsAlarmHistoryGroupIdentifier OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "An integer to uniquely identify a group of Waveservers within a site."
    ::= { cwsAlarmHistoryEntry 10 }

cwsAlarmHistoryMemberIdentifier OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "An integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently."
    ::= { cwsAlarmHistoryEntry 11 }

cwsAlarmDefinedTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsAlarmDefinedEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Defined Alarm Table"
    ::= { cienaWsAlarmMIB 5 }

cwsAlarmDefinedEntry OBJECT-TYPE
    SYNTAX CwsAlarmDefinedEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsAlarmDefinedTable."
    INDEX { cwsAlarmDefinedAlarmTableId }
    ::= { cwsAlarmDefinedTable 1 }

CwsAlarmDefinedEntry ::= SEQUENCE { 
    cwsAlarmDefinedAlarmTableId Integer32,
    cwsAlarmDefinedEnabled TruthValue,
    cwsAlarmDefinedActive TruthValue,
    cwsAlarmDefinedThreshold Unsigned32,
    cwsAlarmDefinedCap Unsigned32,
    cwsAlarmDefinedSeverity AlarmSeverity,
    cwsAlarmDefinedInstance StringMaxl16,
    cwsAlarmDefinedDescription StringMaxl44 
}

cwsAlarmDefinedAlarmTableId OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "The alarm table ID."
    ::= { cwsAlarmDefinedEntry 1 }

cwsAlarmDefinedEnabled OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Alarm is enabled."
    ::= { cwsAlarmDefinedEntry 2 }

cwsAlarmDefinedActive OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Alarm is active."
    ::= { cwsAlarmDefinedEntry 3 }

cwsAlarmDefinedThreshold OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm threshold."
    ::= { cwsAlarmDefinedEntry 4 }

cwsAlarmDefinedCap OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm cap."
    ::= { cwsAlarmDefinedEntry 5 }

cwsAlarmDefinedSeverity OBJECT-TYPE
    SYNTAX AlarmSeverity
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm severity."
    ::= { cwsAlarmDefinedEntry 6 }

cwsAlarmDefinedInstance OBJECT-TYPE
    SYNTAX StringMaxl16
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The object instance the alarm is raised against."
    ::= { cwsAlarmDefinedEntry 7 }

cwsAlarmDefinedDescription OBJECT-TYPE
    SYNTAX StringMaxl44
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm description."
    ::= { cwsAlarmDefinedEntry 8 }

cwsAlarmStatisticsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CwsAlarmStatisticsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Waveserver Alarm Statistics."
    ::= { cienaWsAlarmMIB 6 }

cwsAlarmStatisticsEntry OBJECT-TYPE
    SYNTAX CwsAlarmStatisticsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Entry for cwsAlarmStatisticsTable."
    INDEX { cwsAlarmStatisticsIndex }
    ::= { cwsAlarmStatisticsTable 1 }

CwsAlarmStatisticsEntry ::= SEQUENCE { 
    cwsAlarmStatisticsIndex Integer32,
    cwsAlarmStatisticsActive TruthValue,
    cwsAlarmStatisticsDisabled TruthValue,
    cwsAlarmStatisticsCount Unsigned32,
    cwsAlarmStatisticsCumulative Unsigned32,
    cwsAlarmStatisticsType StringMaxl32 
}

cwsAlarmStatisticsIndex OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "The alarm statistics table index."
    ::= { cwsAlarmStatisticsEntry 1 }

cwsAlarmStatisticsActive OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "There is alarm active for the alarm type"
    ::= { cwsAlarmStatisticsEntry 2 }

cwsAlarmStatisticsDisabled OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "There is alarm disabled for the alarm type"
    ::= { cwsAlarmStatisticsEntry 3 }

cwsAlarmStatisticsCount OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The count of active alarms for the alarm type"
    ::= { cwsAlarmStatisticsEntry 4 }

cwsAlarmStatisticsCumulative OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The cumulative count of active alarms for the alarm type "
    ::= { cwsAlarmStatisticsEntry 5 }

cwsAlarmStatisticsType OBJECT-TYPE
    SYNTAX StringMaxl32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "The alarm type."
    ::= { cwsAlarmStatisticsEntry 6 }



-- Conformance statements
cienaWsAlarmObjects OBJECT IDENTIFIER
    ::= { cienaWsAlarmMIB 1 }

cienaWsAlarmConformance OBJECT IDENTIFIER
    ::= { cienaWsAlarmMIB 2 }

cienaWsAlarmGroups OBJECT IDENTIFIER
    ::= { cienaWsAlarmConformance 1 }

cienaWsAlarmGroup OBJECT-GROUP
    OBJECTS { 
        cwsAlarmActiveAcknowledged,
        cwsAlarmActiveAlarmTableId,
        cwsAlarmActiveSeverity,
        cwsAlarmActiveLocalDateTime,
        cwsAlarmActiveInstance,
        cwsAlarmActiveDescription,
        cwsAlarmActiveSiteIdentifier,
        cwsAlarmActiveGroupIdentifier,
        cwsAlarmActiveMemberIdentifier,
        cwsAlarmHistoryReason,
        cwsAlarmHistoryAlarmInstanceId,
        cwsAlarmHistoryAlarmTableId,
        cwsAlarmHistorySeverity,
        cwsAlarmHistoryLocalDateTime,
        cwsAlarmHistoryInstance,
        cwsAlarmHistoryDescription,
        cwsAlarmHistorySiteIdentifier,
        cwsAlarmHistoryGroupIdentifier,
        cwsAlarmHistoryMemberIdentifier,
        cwsAlarmDefinedEnabled,
        cwsAlarmDefinedActive,
        cwsAlarmDefinedThreshold,
        cwsAlarmDefinedCap,
        cwsAlarmDefinedSeverity,
        cwsAlarmDefinedInstance,
        cwsAlarmDefinedDescription,
        cwsAlarmStatisticsActive,
        cwsAlarmStatisticsDisabled,
        cwsAlarmStatisticsCount,
        cwsAlarmStatisticsCumulative,
        cwsAlarmStatisticsType
    }
    STATUS current
    DESCRIPTION "Conformance Group"
    ::= { cienaWsAlarmGroups 1 }

cienaWsAlarmCompliances OBJECT IDENTIFIER
    ::= { cienaWsAlarmConformance 2 }

cienaWsAlarmCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION "Compliance"
    MODULE MANDATORY-GROUPS { cienaWsAlarmGroup }
    ::= { cienaWsAlarmCompliances 1 }

END -- End module