WWP-LEOS-SYSTEM-CONFIG-MIB DEFINITIONS ::= BEGIN IMPORTS InetAddress, InetAddressType FROM INET-ADDRESS-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF enterprises, IpAddress, Unsigned32, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DateAndTime, DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC wwpModulesLeos FROM WWP-SMI; -- -- Textual conventions -- FileName ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "Represents the textual convention which defines the name string and display hint" SYNTAX OCTET STRING (SIZE (1..64)) SystemClientAdminState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the administration state of a system FTP/TFTP client." SYNTAX INTEGER { enable(1), disable(2) } SystemServerAdminState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the administration state of a system FTP/SFTP/TFTP server." SYNTAX INTEGER { enable(1), disable(2) } -- -- Node definitions -- -- 1.3.6.1.4.1.6141.2.60.12 wwpLeosSystemConfigMIB MODULE-IDENTITY LAST-UPDATED "201508200000Z" -- August 20, 2015 at 00:00 GMT (201508200000Z) ORGANIZATION "Ciena, Inc" CONTACT-INFO " Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com" DESCRIPTION "The MIB module for the WWP System Config information." REVISION "201508200000Z" -- August 20, 2015 at 00:00 GMT (201508200000Z) DESCRIPTION "Defined wwpLeosSystemXFtpSftp, wwpLeosSystemXFtpSftpClient, and wwpLeosSystemXftpSftpClientAlgorithm along with all of the objects these nodes encompass, providing the ability to configure the algorithms used by the various functions of the SFTP client's SSH protocol when used by the xftp feature." REVISION "201507170000Z" -- July 17, 2015 at 00:00 GMT (201507170000Z) DESCRIPTION "Corrected DESCRIPTION for wwpLeosSystemXFtpFtpServerSecret and wwpLeosSystemXFtpSFtpServerSecret." REVISION "201506220000Z" -- June 22, 2015 at 00:00 GMT (201506220000Z) DESCRIPTION "Added wwpLeosSystemXFtpSecret." REVISION "201501210000Z" -- January 21, 2015 at 00:00 GMT (201501210000Z) DESCRIPTION "Added wwpLeosSystemScpServerAdminState." REVISION "201411100000Z" -- November 10, 2014 at 00:00 GMT (201411100000Z) DESCRIPTION "Defined SystemClientAdminState, wwpLeosSystemClients, wwpLeosSystemFtpClientAdminState, and wwpLeosSystemTftpClientAdminState to support ability to enable/disable ftp and tftp client connections from the device." REVISION "201410150000Z" -- October 15, 2014 at 00:00 GMT (201410150000Z) DESCRIPTION "Changed the SYNTAX of wwpLeosSystemXFtpFtpServerSecret to OCTET STRING(SIZE(0..259)). Changed the SYNTAX of wwpLeosSystemXFtpSFtpServerSecret to OCTET STRING(SIZE(0..259))." REVISION "201407150000Z" -- July 15, 2014 at 00:00 GMT (201407150000Z) DESCRIPTION "Updated descriptions in wwpLeosTelnetMaxBaseUserSessions, wwpLeosTelnetMaxAdminUserSessions, and wwpLeosTelnetMaxSuperUserSessions to be more accurate." REVISION "201304230000Z" -- April 23, 2013 at 00:00 GMT (201304230000Z) DESCRIPTION "Miscellaneous spelling and description corrections." REVISION "201210300000Z" -- October 30, 2012 at 00:00 GMT (201210300000Z) DESCRIPTION "Added wwpLeosSystemFtpServerAdminState and wwpLeosSystemTftpServerAdminState for enable/disable of FTP/TFTP server. Added new entries to show status of /mnt/xftp directory along with its associated trap." REVISION "201209190000Z" -- September 19, 2012 at 00:00 GMT (201209190000Z) DESCRIPTION "Added wwpLeosSystemServers for enable/disable of SFTP server." REVISION "201207060000Z" -- July 6, 2012 at 00:00 GMT (201207060000Z) DESCRIPTION "Added three new tables for XFTP server settings." REVISION "201206270000Z" -- June 27, 2012 at 00:00 GMT (201206270000Z) DESCRIPTION "Corrected string lengths." REVISION "201204160000Z" -- April 16, 2012 at 00:00 GMT (201204160000Z) DESCRIPTION "Added a new table for Default Gateway to support IPv6 configuration. The old OID, wwpLeosSystemConfigDefaultGateway, will continue to support ipv4 configuration." REVISION "201111050000Z" -- November 5, 2011 at 00:00 GMT (201111050000Z) DESCRIPTION "Added a new table for Guardian configuration" REVISION "201107050000Z" -- July 5, 2011 at 00:00 GMT (201107050000Z) DESCRIPTION "Added a new object wwpLeosTelnetMaxAdminUserSessions." REVISION "200203160000Z" -- March 16, 2002 at 00:00 GMT (200203160000Z) DESCRIPTION "Initial creation." ::= { wwpModulesLeos 12 } -- 1.3.6.1.4.1.6141.2.60.12.1 wwpLeosSystemConfigMIBObjects OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIB 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.1 wwpLeosSystemConfigAttr OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.1 wwpLeosSystemConfigDefaultGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS current DESCRIPTION "Default gateway IP address." ::= { wwpLeosSystemConfigAttr 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.2 wwpLeosSystemConfigBootCmdFile OBJECT-TYPE SYNTAX FileName ACCESS read-write STATUS current DESCRIPTION "Name of the last command file successfully executed by the device." ::= { wwpLeosSystemConfigAttr 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.3 wwpLeosSystemConfigBootCfgFile OBJECT-TYPE SYNTAX FileName ACCESS read-write STATUS current DESCRIPTION "This object specifies the bootup configuration file for the system. Setting is object is similar to setting default load config file name. When the device reboots, it attempts to load the file specified by wwpLeosSystemConfigBootCfgFile." ::= { wwpLeosSystemConfigAttr 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.4 wwpLeosSystemClockDateTime OBJECT-TYPE SYNTAX DateAndTime ACCESS read-write STATUS current DESCRIPTION "The current system date and time of box. There are no provisions for local time or daylight savings. All times use the 24 hr clock and are UTC. Because device time is UTC, only first 7 bytes of DateAndTime data are returned, as per RFC1903." ::= { wwpLeosSystemConfigAttr 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.5 wwpLeosSystemConfigSavePermFile OBJECT-TYPE SYNTAX FileName ACCESS read-write STATUS current DESCRIPTION "This object sets the save file name to the value of wwpLeosSystemConfigSavePermFile. Whenever wwpLeosSystemConfigControl is set to 'save' and wwpLeosSystemConfigSaveFile is not set, the device uses wwpLeosSystemConfigSavePermFile as the file name to store config." ::= { wwpLeosSystemConfigAttr 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.6 wwpLeosSystemConfigLastFileNameReset OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS current DESCRIPTION "Setting this object resets the name of the last configuration file that was successfully executed by the device." ::= { wwpLeosSystemConfigAttr 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.7 wwpLeosSystemServiceMode OBJECT-TYPE SYNTAX INTEGER { none(0), mpls(1), pbt(2), aoam(3) } ACCESS read-write STATUS current DESCRIPTION "Setting this object changes the service mode of operation. It causes the device to reboot. If this object is set to 'none' the device rejects the request and returns an error. Applicable to 311v only." ::= { wwpLeosSystemConfigAttr 7 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.8 wwpLeosSystemConfigBackupGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS current DESCRIPTION "Backup gateway IP address." ::= { wwpLeosSystemConfigAttr 8 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.9 wwpLeosSystemConfigCustomerCfgFile OBJECT-TYPE SYNTAX FileName ACCESS read-write STATUS current DESCRIPTION "This object sets the name of the default customer configuration file, which is the file that is copied to the default configuration file during a reset-to-customer-default operation. Setting this object to an empty string removes the file name from the system configuration." ::= { wwpLeosSystemConfigAttr 9 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.10 wwpLeosSystemConfigDefaultGatewayTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemConfigDefaultGatewayEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the default gateways." ::= { wwpLeosSystemConfigAttr 10 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1 wwpLeosSystemConfigDefaultGatewayEntry OBJECT-TYPE SYNTAX WwpLeosSystemConfigDefaultGatewayEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemConfigDefaultGatewayTable." INDEX { wwpLeosSystemConfigDefaultGatewayIndex } ::= { wwpLeosSystemConfigDefaultGatewayTable 1 } WwpLeosSystemConfigDefaultGatewayEntry ::= SEQUENCE { wwpLeosSystemConfigDefaultGatewayIndex Integer32, wwpLeosSystemConfigDefaultGatewayInetAddrType InetAddressType, wwpLeosSystemConfigDefaultGatewayInetAddress InetAddress, wwpLeosSystemConfigDefaultGatewayInterfaceName DisplayString, wwpLeosSystemConfigDefaultGatewayMetric Integer32, wwpLeosSystemConfigDefaultGatewayStatus RowStatus } -- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.1 wwpLeosSystemConfigDefaultGatewayIndex OBJECT-TYPE SYNTAX Integer32 (1..16) ACCESS not-accessible STATUS current DESCRIPTION "Unique identifier to the table." ::= { wwpLeosSystemConfigDefaultGatewayEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.2 wwpLeosSystemConfigDefaultGatewayInetAddrType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-create STATUS current DESCRIPTION "The Inet address type of default gateway. Used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddress. When set to : Ipv4: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with InetAddressIPv4 from RFC 4001 Ipv6: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with InetAddressIPv6 from RFC 4001." ::= { wwpLeosSystemConfigDefaultGatewayEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.3 wwpLeosSystemConfigDefaultGatewayInetAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-create STATUS current DESCRIPTION "Default gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddrType. The InetAddress set here should be compliant with RFC 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigDefaultGateway is set to 0.0.0.0." ::= { wwpLeosSystemConfigDefaultGatewayEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.4 wwpLeosSystemConfigDefaultGatewayInterfaceName OBJECT-TYPE SYNTAX DisplayString ACCESS read-create STATUS current DESCRIPTION "Interface Name of the gateway, local or remote." ::= { wwpLeosSystemConfigDefaultGatewayEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.5 wwpLeosSystemConfigDefaultGatewayMetric OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS current DESCRIPTION "Metric of the gateway." ::= { wwpLeosSystemConfigDefaultGatewayEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.6 wwpLeosSystemConfigDefaultGatewayStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'." ::= { wwpLeosSystemConfigDefaultGatewayEntry 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.11 wwpLeosSystemConfigBackupGatewayTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemConfigBackupGatewayEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the default gateways" ::= { wwpLeosSystemConfigAttr 11 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1 wwpLeosSystemConfigBackupGatewayEntry OBJECT-TYPE SYNTAX WwpLeosSystemConfigBackupGatewayEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemConfigBackupGatewayTable." INDEX { wwpLeosSystemConfigBackupGatewayIndex } ::= { wwpLeosSystemConfigBackupGatewayTable 1 } WwpLeosSystemConfigBackupGatewayEntry ::= SEQUENCE { wwpLeosSystemConfigBackupGatewayIndex Integer32, wwpLeosSystemConfigBackupGatewayInetAddrType InetAddressType, wwpLeosSystemConfigBackupGatewayInetAddress InetAddress, wwpLeosSystemConfigBackupGatewayInterfaceName DisplayString, wwpLeosSystemConfigBackupGatewayMetric Integer32, wwpLeosSystemConfigBackupGatewayStatus RowStatus } -- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.1 wwpLeosSystemConfigBackupGatewayIndex OBJECT-TYPE SYNTAX Integer32 (1..16) ACCESS not-accessible STATUS current DESCRIPTION "Unique identifier to the table." ::= { wwpLeosSystemConfigBackupGatewayEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.2 wwpLeosSystemConfigBackupGatewayInetAddrType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-create STATUS current DESCRIPTION "The Inet address type of backup gateway. Used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with InetAddressIPv4 from RFC 4001 ipv6: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with InetAddressIPv6 from RFC 4001." ::= { wwpLeosSystemConfigBackupGatewayEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.3 wwpLeosSystemConfigBackupGatewayInetAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-create STATUS current DESCRIPTION "Backup gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigBackupGateway is set ot 0.0.0.0." ::= { wwpLeosSystemConfigBackupGatewayEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.4 wwpLeosSystemConfigBackupGatewayInterfaceName OBJECT-TYPE SYNTAX DisplayString ACCESS read-create STATUS current DESCRIPTION "Interface Name of the gateway, local or remote." ::= { wwpLeosSystemConfigBackupGatewayEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.5 wwpLeosSystemConfigBackupGatewayMetric OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS current DESCRIPTION "Metric of the gateway." ::= { wwpLeosSystemConfigBackupGatewayEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.6 wwpLeosSystemConfigBackupGatewayStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'." ::= { wwpLeosSystemConfigBackupGatewayEntry 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.2 wwpLeosSystemConfig OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.2.1 wwpLeosSystemConfigSaveFileName OBJECT-TYPE SYNTAX FileName ACCESS read-write STATUS current DESCRIPTION "wwpLeosSystemConfigSaveFileName specifies the name of the config file to be used when wwpLeosSystemConfigControl has been set to 'save'. If this object is not set the device uses the file name specified by wwpLeosSystemConfigSavePermFile. If wwpLeosSystemConfigSavePermFile is also not set, the default configuration file name i.e startup-config is used to save the config. Once 'wwpLeosSystemConfigControl' has been successfully applied, a read on wwpLeosSystemConfigSaveFileName always returns an empty string else it shows what the user has configured." ::= { wwpLeosSystemConfig 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.2.2 wwpLeosSystemConfigControl OBJECT-TYPE SYNTAX INTEGER { none(0), save(1), mfgDefaultCfg(2) } ACCESS read-write STATUS current DESCRIPTION "Controls configuration options on the device. The current options are: save: to make the configuration changes made using SNMP persistent across a reboot. mfgDefaultCfg: Set system configuration to factory defaults. Note: This wipes out all the current configuration including password and VLAN information. If the system does not support any of these control configuration options, it returns an error while trying to set this object to the specific option. A read on this object returns none(0)." ::= { wwpLeosSystemConfig 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.2.3 wwpLeosSystemConfigFilepath OBJECT-TYPE SYNTAX FileName ACCESS read-only STATUS current DESCRIPTION "Returns the path for configuration related files." ::= { wwpLeosSystemConfig 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.2.4 wwpLeosSystemConfigFileTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemConfigFileEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the configs" ::= { wwpLeosSystemConfig 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.2.4.1 wwpLeosSystemConfigFileEntry OBJECT-TYPE SYNTAX WwpLeosSystemConfigFileEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemConfigFileTable." INDEX { wwpLeosSystemConfigFileIndex } ::= { wwpLeosSystemConfigFileTable 1 } WwpLeosSystemConfigFileEntry ::= SEQUENCE { wwpLeosSystemConfigFileIndex Integer32, wwpLeosSystemConfigFileName FileName, wwpLeosSystemConfigActivateFile INTEGER } -- 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.1 wwpLeosSystemConfigFileIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS not-accessible STATUS current DESCRIPTION "Unique identifier to the table." ::= { wwpLeosSystemConfigFileEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.2 wwpLeosSystemConfigFileName OBJECT-TYPE SYNTAX FileName ACCESS read-only STATUS current DESCRIPTION "The name of the configuration file." ::= { wwpLeosSystemConfigFileEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.3 wwpLeosSystemConfigActivateFile OBJECT-TYPE SYNTAX INTEGER { loadCfg(1), resetToCfg(2), none(3) } ACCESS read-write STATUS current DESCRIPTION "Set this object to 'loadCfg to load the 'wwpLeosSystemConfigFileName' configuration. If the operation is successful, this object performs the CLI equivalent to these commands and returns the status. Setting this object to 'resetToCfg' kills the load module, reloads a new load module and applies the config file specified by wwpLeosSystemConfigFileName. Setting this object to 'none' does nothing." DEFVAL { { none } } ::= { wwpLeosSystemConfigFileEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.3 wwpLeosSystemTelnet OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.3.1 wwpLeosTelnetMaxBaseUserSessions OBJECT-TYPE SYNTAX Integer32 (0..10) ACCESS read-write STATUS current DESCRIPTION "The max number of limited user CLI sessions for the device. Includes both SSH and telnet sessions." ::= { wwpLeosSystemTelnet 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.3.2 wwpLeosTelnetMaxSuperUserSessions OBJECT-TYPE SYNTAX Integer32 (0..10) ACCESS read-write STATUS current DESCRIPTION "The max number of super user CLI sessions for the device. Includes both SSH and telnet sessions." ::= { wwpLeosSystemTelnet 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.3.3 wwpLeosTelnetMaxAdminUserSessions OBJECT-TYPE SYNTAX Integer32 (0..10) ACCESS read-write STATUS current DESCRIPTION "The max number of admin users CLI sessions for the device. Includes both SSH and telnet sessions." ::= { wwpLeosSystemTelnet 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.7 wwpLeosSystemCpuLoadQuery OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 7 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.1 wwpLeosSystemCpuLoad1Min OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The OID to display CPU load in last 1 minute. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.2 wwpLeosSystemCpuLoad10Min OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The OID to display CPU load in last 10 minutes. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.3 wwpLeosSystemCpuLoad15Min OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The OID to display CPU load in last 15 minutes. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.4 wwpLeosSystemCpuLoad5Min OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The OID to display CPU load in last 5 minutes. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.5 wwpLeosSystemCpuLoad1MinMinimum OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The minimum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.6 wwpLeosSystemCpuLoad1MinMaximum OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The maximum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.7 wwpLeosSystemCpuLoad1MinState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "The 1 minute CPU load average state." ::= { wwpLeosSystemCpuLoadQuery 7 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.8 wwpLeosSystemCpuLoad15MinMinimum OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The minimum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 8 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.9 wwpLeosSystemCpuLoad15MinMaximum OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The maximum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 9 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.10 wwpLeosSystemCpuLoad15MinState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "The 15 minute CPU load average state." ::= { wwpLeosSystemCpuLoadQuery 10 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.11 wwpLeosSystemCpuLoad5MinMinimum OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The minimum 5 minute CPU load average. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 11 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.12 wwpLeosSystemCpuLoad5MinMaximum OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The maximum 5 minute CPU load average. This value is an integer representation of the CPU load (load average * 100)." ::= { wwpLeosSystemCpuLoadQuery 12 } -- 1.3.6.1.4.1.6141.2.60.12.1.7.13 wwpLeosSystemCpuLoad5MinState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "The 5 minute CPU load average state." ::= { wwpLeosSystemCpuLoadQuery 13 } -- 1.3.6.1.4.1.6141.2.60.12.1.8 wwpLeosSystemConfigNotif OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 8 } -- 1.3.6.1.4.1.6141.2.60.12.1.8.1 wwpLeosSystemConfigNotifTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemConfigNotifEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the configuration file line numbers. This table is only used when sending wwpLeosImproperCmdInConfigFile notification. No Get, GetNext or Set is allowed in this table." ::= { wwpLeosSystemConfigNotif 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.8.1.1 wwpLeosSystemConfigNotifEntry OBJECT-TYPE SYNTAX WwpLeosSystemConfigNotifEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemConfigNotifTable. No Get, GetNext or Set is allowed in this table." INDEX { wwpLeosSystemConfigFileIndex } ::= { wwpLeosSystemConfigNotifTable 1 } WwpLeosSystemConfigNotifEntry ::= SEQUENCE { wwpLeosSystemConfigErrLineNum Integer32, wwpLeosSystemConfigErrStr DisplayString, wwpLeosSystemConfigErrLinesTotal Integer32 } -- 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.1 wwpLeosSystemConfigErrLineNum OBJECT-TYPE SYNTAX Integer32 (0..64) ACCESS read-only STATUS current DESCRIPTION "The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the line number that failed when the configuration was applied. No Get, GetNext or Set is allowed in this table." ::= { wwpLeosSystemConfigNotifEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.2 wwpLeosSystemConfigErrStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "The OID is wwpLeosSystemConfigErrStr trap to identify the line that failed when the configuration was applied. No Get, GetNext or Set is allowed on this table." ::= { wwpLeosSystemConfigNotifEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.3 wwpLeosSystemConfigErrLinesTotal OBJECT-TYPE SYNTAX Integer32 (0..64) ACCESS read-only STATUS current DESCRIPTION "The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the total line numbers that failed when the configuration was applied. No Get, GetNext or Set is allowed in this table." ::= { wwpLeosSystemConfigNotifEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.9 wwpLeosSystemMemoryUsageQuery OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 9 } -- 1.3.6.1.4.1.6141.2.60.12.1.9.1 wwpLeosSystemMemoryUsageTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemMemoryUsageEntry ACCESS not-accessible STATUS current DESCRIPTION "Table of Memory Usage for various Memory Pools." ::= { wwpLeosSystemMemoryUsageQuery 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1 wwpLeosSystemMemoryUsageEntry OBJECT-TYPE SYNTAX WwpLeosSystemMemoryUsageEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry for each Memory Pool." INDEX { wwpLeosSystemMemoryUsagePoolIndex } ::= { wwpLeosSystemMemoryUsageTable 1 } WwpLeosSystemMemoryUsageEntry ::= SEQUENCE { wwpLeosSystemMemoryUsagePoolIndex INTEGER, wwpLeosSystemMemoryUsageMemoryTotal Unsigned32, wwpLeosSystemMemoryUsageMemoryLWM Unsigned32, wwpLeosSystemMemoryUsageMemoryFree Unsigned32, wwpLeosSystemMemoryUsageStatus INTEGER, wwpLeosSystemMemoryUsageMemoryUsed Unsigned32, wwpLeosSystemMemoryUsageMemoryAvailable Unsigned32 } -- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.1 wwpLeosSystemMemoryUsagePoolIndex OBJECT-TYPE SYNTAX INTEGER { ose-pool-1(1), global-heap(2), malloc-heap(3) } ACCESS not-accessible STATUS current DESCRIPTION "The Memory Pool type." ::= { wwpLeosSystemMemoryUsageEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.2 wwpLeosSystemMemoryUsageMemoryTotal OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" ACCESS read-only STATUS current DESCRIPTION "Total size of the Memory Pool in bytes." ::= { wwpLeosSystemMemoryUsageEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.3 wwpLeosSystemMemoryUsageMemoryLWM OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-only STATUS current DESCRIPTION "Lowest free memory in the Memory Pool in bytes. Not supported in SAOS 6.x" ::= { wwpLeosSystemMemoryUsageEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.4 wwpLeosSystemMemoryUsageMemoryFree OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" ACCESS read-only STATUS current DESCRIPTION "Amount of free memory in the Memory Pool in bytes. This corresponds to the CLI's memory never used." ::= { wwpLeosSystemMemoryUsageEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.5 wwpLeosSystemMemoryUsageStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), lowMemory(2), notSupported(3) } ACCESS read-only STATUS current DESCRIPTION "Denotes if the free memory amount is normal or below limit." ::= { wwpLeosSystemMemoryUsageEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.6 wwpLeosSystemMemoryUsageMemoryUsed OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" ACCESS read-only STATUS current DESCRIPTION "Amount of used memory in the Memory Pool in bytes." ::= { wwpLeosSystemMemoryUsageEntry 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.7 wwpLeosSystemMemoryUsageMemoryAvailable OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" ACCESS read-only STATUS current DESCRIPTION "Amount of available memory in the Memory Pool in bytes." ::= { wwpLeosSystemMemoryUsageEntry 7 } -- 1.3.6.1.4.1.6141.2.60.12.1.10 wwpLeosSystemXFtp OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 10 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.1 wwpLeosSystemXFtpMode OBJECT-TYPE SYNTAX INTEGER { tftp(1), ftp(2), sftp(3) } ACCESS read-write STATUS current DESCRIPTION "Select between modes of file transfer. The default mode is tftp." ::= { wwpLeosSystemXFtp 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.2 wwpLeosSystemXFtpServer OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS current DESCRIPTION "IP address or the host name of default server." ::= { wwpLeosSystemXFtp 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.3 wwpLeosSystemXFtpUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS current DESCRIPTION "Name used to login with." ::= { wwpLeosSystemXFtp 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.4 wwpLeosSystemXFtpPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-write STATUS current DESCRIPTION "Password used to login with." ::= { wwpLeosSystemXFtp 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.5 wwpLeosSystemXFtpNumOfRetries OBJECT-TYPE SYNTAX Integer32 (1..10) ACCESS read-write STATUS current DESCRIPTION "Number of times to retry a file transfer request if it fails." ::= { wwpLeosSystemXFtp 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.6 wwpLeosSystemXFtpRetryInterval OBJECT-TYPE SYNTAX Integer32 (1..300) ACCESS read-write STATUS current DESCRIPTION "Length of time in seconds to wait before retrying a file transfer if it fails." ::= { wwpLeosSystemXFtp 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.7 wwpLeosSystemXFtpConnectionTimeout OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-write STATUS current DESCRIPTION "Length of time in seconds to wait before connection times out." ::= { wwpLeosSystemXFtp 7 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.8 wwpLeosSystemXFtpTFtpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemXFtpTFtpServerEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the default TFTP server" ::= { wwpLeosSystemXFtp 8 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.8.1 wwpLeosSystemXFtpTFtpServerEntry OBJECT-TYPE SYNTAX WwpLeosSystemXFtpTFtpServerEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemXFtpTFtpServerTable." INDEX { wwpLeosSystemXFtpTFtpServerIndex } ::= { wwpLeosSystemXFtpTFtpServerTable 1 } WwpLeosSystemXFtpTFtpServerEntry ::= SEQUENCE { wwpLeosSystemXFtpTFtpServerIndex Integer32, wwpLeosSystemXFtpTFtpServerHostName DisplayString, wwpLeosSystemXFtpTFtpServerRowStatus RowStatus } -- 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.1 wwpLeosSystemXFtpTFtpServerIndex OBJECT-TYPE SYNTAX Integer32 (1) ACCESS not-accessible STATUS current DESCRIPTION "Unique identifier to the table." ::= { wwpLeosSystemXFtpTFtpServerEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.2 wwpLeosSystemXFtpTFtpServerHostName OBJECT-TYPE SYNTAX DisplayString ACCESS read-create STATUS current DESCRIPTION "Host name or IP address of the default TFTP server." ::= { wwpLeosSystemXFtpTFtpServerEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.6 wwpLeosSystemXFtpTFtpServerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1." ::= { wwpLeosSystemXFtpTFtpServerEntry 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.9 wwpLeosSystemXFtpFtpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemXFtpFtpServerEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the default FTP server." ::= { wwpLeosSystemXFtp 9 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1 wwpLeosSystemXFtpFtpServerEntry OBJECT-TYPE SYNTAX WwpLeosSystemXFtpFtpServerEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemXFtpFtpServerTable." INDEX { wwpLeosSystemXFtpFtpServerIndex } ::= { wwpLeosSystemXFtpFtpServerTable 1 } WwpLeosSystemXFtpFtpServerEntry ::= SEQUENCE { wwpLeosSystemXFtpFtpServerIndex Integer32, wwpLeosSystemXFtpFtpServerHostName DisplayString, wwpLeosSystemXFtpFtpServerUserName DisplayString, wwpLeosSystemXFtpFtpServerPassword DisplayString, wwpLeosSystemXFtpFtpServerSecret OCTET STRING, wwpLeosSystemXFtpFtpServerRowStatus RowStatus } -- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.1 wwpLeosSystemXFtpFtpServerIndex OBJECT-TYPE SYNTAX Integer32 (1) ACCESS not-accessible STATUS current DESCRIPTION "Unique identifier to the table." ::= { wwpLeosSystemXFtpFtpServerEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.2 wwpLeosSystemXFtpFtpServerHostName OBJECT-TYPE SYNTAX DisplayString ACCESS read-create STATUS current DESCRIPTION "Host name or IP address of the default FTP server." ::= { wwpLeosSystemXFtpFtpServerEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.3 wwpLeosSystemXFtpFtpServerUserName OBJECT-TYPE SYNTAX DisplayString ACCESS read-create STATUS current DESCRIPTION "User name / login ID to be used with the default FTP server." ::= { wwpLeosSystemXFtpFtpServerEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.4 wwpLeosSystemXFtpFtpServerPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-create STATUS current DESCRIPTION "Password to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both." ::= { wwpLeosSystemXFtpFtpServerEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.5 wwpLeosSystemXFtpFtpServerSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..259)) ACCESS read-create STATUS current DESCRIPTION "Password secret to be used with the default FTP server. Either the password or the secret may be set, but not both." ::= { wwpLeosSystemXFtpFtpServerEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.6 wwpLeosSystemXFtpFtpServerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1." ::= { wwpLeosSystemXFtpFtpServerEntry 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.10 wwpLeosSystemXFtpSFtpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemXFtpSFtpServerEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the default SFTP server" ::= { wwpLeosSystemXFtp 10 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1 wwpLeosSystemXFtpSFtpServerEntry OBJECT-TYPE SYNTAX WwpLeosSystemXFtpSFtpServerEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemXFtpSFtpServerTable." INDEX { wwpLeosSystemXFtpSFtpServerIndex } ::= { wwpLeosSystemXFtpSFtpServerTable 1 } WwpLeosSystemXFtpSFtpServerEntry ::= SEQUENCE { wwpLeosSystemXFtpSFtpServerIndex Integer32, wwpLeosSystemXFtpSFtpServerHostName DisplayString, wwpLeosSystemXFtpSFtpServerUserName DisplayString, wwpLeosSystemXFtpSFtpServerPassword DisplayString, wwpLeosSystemXFtpSFtpServerSecret OCTET STRING, wwpLeosSystemXFtpSFtpServerRowStatus RowStatus } -- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.1 wwpLeosSystemXFtpSFtpServerIndex OBJECT-TYPE SYNTAX Integer32 (1) ACCESS not-accessible STATUS current DESCRIPTION "Unique identifier to the table." ::= { wwpLeosSystemXFtpSFtpServerEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.2 wwpLeosSystemXFtpSFtpServerHostName OBJECT-TYPE SYNTAX DisplayString ACCESS read-create STATUS current DESCRIPTION "Host name or IP address of the default SFTP server." ::= { wwpLeosSystemXFtpSFtpServerEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.3 wwpLeosSystemXFtpSFtpServerUserName OBJECT-TYPE SYNTAX DisplayString ACCESS read-create STATUS current DESCRIPTION "User name / login ID to be used with the default SFTP server." ::= { wwpLeosSystemXFtpSFtpServerEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.4 wwpLeosSystemXFtpSFtpServerPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-create STATUS current DESCRIPTION "Password to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both." ::= { wwpLeosSystemXFtpSFtpServerEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.5 wwpLeosSystemXFtpSFtpServerSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..259)) ACCESS read-create STATUS current DESCRIPTION "Password secret to be used with the default SFTP server. Either the password or the secret may be set, but not both." ::= { wwpLeosSystemXFtpSFtpServerEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.6 wwpLeosSystemXFtpSFtpServerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1." ::= { wwpLeosSystemXFtpSFtpServerEntry 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.11 wwpLeosSystemXFtpSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..259)) ACCESS read-write STATUS current DESCRIPTION "Sets the pre-encypted secret. This global secret will be automatically applied to either the ftp or sftp table, depending on the value of the wwpLeosSystemXFtpMode object." ::= { wwpLeosSystemXFtp 11 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12 wwpLeosSystemXFtpSftp OBJECT IDENTIFIER ::= { wwpLeosSystemXFtp 12 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1 wwpLeosSystemXFtpSftpClient OBJECT IDENTIFIER ::= { wwpLeosSystemXFtpSftp 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1 wwpLeosSystemXftpSftpClientAlgorithm OBJECT IDENTIFIER ::= { wwpLeosSystemXFtpSftpClient 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1 wwpLeosSystemXftpSftpClientKexAlgorithmTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientKexAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the SFTP Client's SSH key-exchange (KEX) algorithms." ::= { wwpLeosSystemXftpSftpClientAlgorithm 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1 wwpLeosSystemXftpSftpClientKexAlgorithmEntry OBJECT-TYPE SYNTAX WwpLeosSystemXftpSftpClientKexAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemXftpSftpClientKexAlgorithmTable." INDEX { wwpLeosSystemXftpSftpClientKexAlgorithmIndex } ::= { wwpLeosSystemXftpSftpClientKexAlgorithmTable 1 } WwpLeosSystemXftpSftpClientKexAlgorithmEntry ::= SEQUENCE { wwpLeosSystemXftpSftpClientKexAlgorithmIndex Unsigned32, wwpLeosSystemXftpSftpClientKexAlgorithmName DisplayString, wwpLeosSystemXftpSftpClientKexAlgorithmAdminState INTEGER, wwpLeosSystemXftpSftpClientKexAlgorithmOperState INTEGER, wwpLeosSystemXftpSftpClientKexAlgorithmPriority Unsigned32 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.1 wwpLeosSystemXftpSftpClientKexAlgorithmIndex OBJECT-TYPE SYNTAX Unsigned32 ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientKexAlgorithmName." ::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.2 wwpLeosSystemXftpSftpClientKexAlgorithmName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Name of the algorithm as used by the SFTP client's SSH protocol when negotiating the key exchange algorithm with SSH servers." ::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.3 wwpLeosSystemXftpSftpClientKexAlgorithmAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS current DESCRIPTION "The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the key exchange algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientKexAlgorithmOperState." ::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.4 wwpLeosSystemXftpSftpClientKexAlgorithmOperState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS current DESCRIPTION "The operational state of the algorithm, indicating whether the specified algorithm will be included in the key exchange algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientKexAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used." ::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.5 wwpLeosSystemXftpSftpClientKexAlgorithmPriority OBJECT-TYPE SYNTAX Unsigned32 (1..3) ACCESS read-write STATUS current DESCRIPTION "The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the key exchange algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of one algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm." ::= { wwpLeosSystemXftpSftpClientKexAlgorithmEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2 wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the SFTP client's SSH server host key algorithms." ::= { wwpLeosSystemXftpSftpClientAlgorithm 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1 wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry OBJECT-TYPE SYNTAX WwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable." INDEX { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmIndex } ::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable 1 } WwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry ::= SEQUENCE { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmIndex Unsigned32, wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName DisplayString, wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState INTEGER, wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState INTEGER, wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmPriority Unsigned32 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.1 wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmIndex OBJECT-TYPE SYNTAX Unsigned32 ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName." ::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.2 wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Name of the algorithm as used by the SFTP client's SSH protocol when negotiating the server host key algorithm with SSH servers." ::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.3 wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS current DESCRIPTION "The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the server host key algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState." ::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.4 wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS current DESCRIPTION "The operational state of the algorithm, indicating whether the specified algorithm will be included in the server host key algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used." ::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.5 wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmPriority OBJECT-TYPE SYNTAX Unsigned32 (1..6) ACCESS read-write STATUS current DESCRIPTION "The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the server host key algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of an algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm." ::= { wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3 wwpLeosSystemXftpSftpClientEncryptionAlgorithmTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the SFTP client's SSH encryption algorithms." ::= { wwpLeosSystemXftpSftpClientAlgorithm 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1 wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry OBJECT-TYPE SYNTAX WwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemXftpSftpClientEncryptionAlgorithmTable." INDEX { wwpLeosSystemXftpSftpClientEncryptionAlgorithmIndex } ::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmTable 1 } WwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry ::= SEQUENCE { wwpLeosSystemXftpSftpClientEncryptionAlgorithmIndex Unsigned32, wwpLeosSystemXftpSftpClientEncryptionAlgorithmName DisplayString, wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState INTEGER, wwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState INTEGER, wwpLeosSystemXftpSftpClientEncryptionAlgorithmPriority Unsigned32 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.1 wwpLeosSystemXftpSftpClientEncryptionAlgorithmIndex OBJECT-TYPE SYNTAX Unsigned32 ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState." ::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.2 wwpLeosSystemXftpSftpClientEncryptionAlgorithmName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Name of the algorithm as used by the SFTP client SSH protocol when negotiating the encryption algorithm with SSH servers." ::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.3 wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS current DESCRIPTION "The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the encryption algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState." ::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.4 wwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS current DESCRIPTION "The operational state of the algorithm, indicating whether the specified algorithm will be included in the encryption algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used." ::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.5 wwpLeosSystemXftpSftpClientEncryptionAlgorithmPriority OBJECT-TYPE SYNTAX Unsigned32 (1..12) ACCESS read-write STATUS current DESCRIPTION "The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the encryption algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of one algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm." ::= { wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4 wwpLeosSystemXftpSftpClientMacAlgorithmTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientMacAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the SFTP client's SSH message authentication code (MAC) algorithms." ::= { wwpLeosSystemXftpSftpClientAlgorithm 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1 wwpLeosSystemXftpSftpClientMacAlgorithmEntry OBJECT-TYPE SYNTAX WwpLeosSystemXftpSftpClientMacAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemXftpSftpClientMacAlgorithmTable." INDEX { wwpLeosSystemXftpSftpClientMacAlgorithmIndex } ::= { wwpLeosSystemXftpSftpClientMacAlgorithmTable 1 } WwpLeosSystemXftpSftpClientMacAlgorithmEntry ::= SEQUENCE { wwpLeosSystemXftpSftpClientMacAlgorithmIndex Unsigned32, wwpLeosSystemXftpSftpClientMacAlgorithmName DisplayString, wwpLeosSystemXftpSftpClientMacAlgorithmAdminState INTEGER, wwpLeosSystemXftpSftpClientMacAlgorithmOperState INTEGER, wwpLeosSystemXftpSftpClientMacAlgorithmPriority Unsigned32 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.1 wwpLeosSystemXftpSftpClientMacAlgorithmIndex OBJECT-TYPE SYNTAX Unsigned32 ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientMacAlgorithmName." ::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.2 wwpLeosSystemXftpSftpClientMacAlgorithmName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Name of the algorithm as used by the SFTP client's SSH protocol when negotiating the message authentication code algorithm with SSH servers." ::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.3 wwpLeosSystemXftpSftpClientMacAlgorithmAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS current DESCRIPTION "The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the message authentication code algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientMacAlgorithmOperState." ::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.4 wwpLeosSystemXftpSftpClientMacAlgorithmOperState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS current DESCRIPTION "The operational state of the algorithm, indicating whether the specified algorithm will be included in the message authentication code algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientMacAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used." ::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.5 wwpLeosSystemXftpSftpClientMacAlgorithmPriority OBJECT-TYPE SYNTAX Unsigned32 (1..6) ACCESS read-write STATUS current DESCRIPTION "The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the message authentication code algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order or priority, as part of the algorithm negotiation process. When the priority of an algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm." ::= { wwpLeosSystemXftpSftpClientMacAlgorithmEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5 wwpLeosSystemXftpSftpClientCompressionAlgorithmTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSystemXftpSftpClientCompressionAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the SFTP client's SSH compression algorithms. NOTE: At this time the system xftp feature only supports 'none' compression algorithm. This table is provided for completeness since the compression algorithm is one of the algorithms negotiated during SSH connections." ::= { wwpLeosSystemXftpSftpClientAlgorithm 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1 wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry OBJECT-TYPE SYNTAX WwpLeosSystemXftpSftpClientCompressionAlgorithmEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSystemXftpSftpClientCompressionAlgorithmTable." INDEX { wwpLeosSystemXftpSftpClientCompressionAlgorithmIndex } ::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmTable 1 } WwpLeosSystemXftpSftpClientCompressionAlgorithmEntry ::= SEQUENCE { wwpLeosSystemXftpSftpClientCompressionAlgorithmIndex Unsigned32, wwpLeosSystemXftpSftpClientCompressionAlgorithmName DisplayString, wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState INTEGER, wwpLeosSystemXftpSftpClientCompressionAlgorithmOperState INTEGER, wwpLeosSystemXftpSftpClientCompressionAlgorithmPriority Unsigned32 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.1 wwpLeosSystemXftpSftpClientCompressionAlgorithmIndex OBJECT-TYPE SYNTAX Unsigned32 ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState." ::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.2 wwpLeosSystemXftpSftpClientCompressionAlgorithmName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Name of the algorithm as used by the SFTP client SSH protocol when negotiating the compression algorithm with SSH servers." ::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.3 wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS current DESCRIPTION "The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the compression algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientCompressionAlgorithmOperState." ::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.4 wwpLeosSystemXftpSftpClientCompressionAlgorithmOperState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS current DESCRIPTION "The operational state of the algorithm, indicating whether the specified algorithm will be included in the compression algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used." ::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.5 wwpLeosSystemXftpSftpClientCompressionAlgorithmPriority OBJECT-TYPE SYNTAX Unsigned32 (1) ACCESS read-write STATUS current DESCRIPTION "The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the compression algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of one algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm." ::= { wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.11 wwpLeosSystemCpuUtilization OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 11 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.1 wwpLeosSystemCpuUtilizationLast5Seconds OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Average 5 second CPU usage measurement." ::= { wwpLeosSystemCpuUtilization 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.2 wwpLeosSystemCpuUtilizationLast5SecondsMinimum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Minimum 5 second CPU usage measurement." ::= { wwpLeosSystemCpuUtilization 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.3 wwpLeosSystemCpuUtilizationLast5SecondsMaximum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "The maximum 5 second CPU usage measurement." ::= { wwpLeosSystemCpuUtilization 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.4 wwpLeosSystemCpuUtilizationLast5SecondsState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "The 5 second CPU usage state." ::= { wwpLeosSystemCpuUtilization 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.5 wwpLeosSystemCpuUtilizationLast10Seconds OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "The 10 second CPU usage measurement." ::= { wwpLeosSystemCpuUtilization 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.6 wwpLeosSystemCpuUtilizationLast10SecondsMinimum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Minimum 10 second CPU usage measurement." ::= { wwpLeosSystemCpuUtilization 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.7 wwpLeosSystemCpuUtilizationLast10SecondsMaximum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Maximum 10 second CPU usage measurement." ::= { wwpLeosSystemCpuUtilization 7 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.8 wwpLeosSystemCpuUtilizationLast10SecondsState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "The 10 second CPU usage state." ::= { wwpLeosSystemCpuUtilization 8 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.9 wwpLeosSystemCpuUtilizationLast60Seconds OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "The 60 second CPU usage state." ::= { wwpLeosSystemCpuUtilization 9 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.10 wwpLeosSystemCpuUtilizationLast60SecondsMinimum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Minimum 60 second CPU usage measurement." ::= { wwpLeosSystemCpuUtilization 10 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.11 wwpLeosSystemCpuUtilizationLast60SecondsMaximum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Maximum 60 second CPU usage measurement." ::= { wwpLeosSystemCpuUtilization 11 } -- 1.3.6.1.4.1.6141.2.60.12.1.11.12 wwpLeosSystemCpuUtilizationLast60SecondsState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "The 60 second CPU state." ::= { wwpLeosSystemCpuUtilization 12 } -- 1.3.6.1.4.1.6141.2.60.12.1.12 wwpLeosSystemFileSystemUtilization OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 12 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.1 wwpLeosSystemFileSystemUtilizationTmpfsCurrent OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Current percentage usage of the /tmp/ directory in the filesystem." ::= { wwpLeosSystemFileSystemUtilization 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.2 wwpLeosSystemFileSystemUtilizationTmpfsMinimum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Minimum percentage usage of the /tmp/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.3 wwpLeosSystemFileSystemUtilizationTmpfsMaximum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Maximum percentage usage of the /tmp/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.4 wwpLeosSystemFileSystemUtilizationTmpfsState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "Current state of the /tmp/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.5 wwpLeosSystemFileSystemUtilizationSysfsCurrent OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Current percentage usage of the /mnt/sysfs/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.6 wwpLeosSystemFileSystemUtilizationSysfsMinimum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Minimum percentage usage of the /mnt/sysfs/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.7 wwpLeosSystemFileSystemUtilizationSysfsMaximum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Maximum percentage usage of the /mnt/sysfs/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 7 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.8 wwpLeosSystemFileSystemUtilizationSysfsState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "Current state of the /mnt/sysfs/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 8 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.9 wwpLeosSystemFileSystemUtilizationXftpCurrent OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Current percentage usage of the /mnt/xftp/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 9 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.10 wwpLeosSystemFileSystemUtilizationXftpMinimum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Minimum percentage usage of the /mnt/xftp/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 10 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.11 wwpLeosSystemFileSystemUtilizationXftpMaximum OBJECT-TYPE SYNTAX Integer32 (1..100) ACCESS read-only STATUS current DESCRIPTION "Maximum percentage usage of the /mnt/xftp/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 11 } -- 1.3.6.1.4.1.6141.2.60.12.1.12.12 wwpLeosSystemFileSystemUtilizationXftpState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "Current state of the /mnt/xftp/ directory in the file system." ::= { wwpLeosSystemFileSystemUtilization 12 } -- 1.3.6.1.4.1.6141.2.60.12.1.13 wwpLeosSystemMemoryUtilization OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 13 } -- 1.3.6.1.4.1.6141.2.60.12.1.13.1 wwpLeosSystemMemoryUtilizationUsedMemoryCurrent OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "Current number of used memory in bytes." ::= { wwpLeosSystemMemoryUtilization 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.13.2 wwpLeosSystemMemoryUtilizationUsedMemoryMinimum OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "Minimum number of used memory in bytes." ::= { wwpLeosSystemMemoryUtilization 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.13.3 wwpLeosSystemMemoryUtilizationUsedMemoryMaximum OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "Maximum number of used memory in bytes." ::= { wwpLeosSystemMemoryUtilization 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.13.4 wwpLeosSystemMemoryUtilizationAvailableMemoryCurrent OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "Current number of available memory in bytes." ::= { wwpLeosSystemMemoryUtilization 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.13.5 wwpLeosSystemMemoryUtilizationAvailableMemoryMinimum OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "Minimum number of available memory in bytes." ::= { wwpLeosSystemMemoryUtilization 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.13.6 wwpLeosSystemMemoryUtilizationAvailableMemoryMaximum OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "Maximum number of available memory in bytes." ::= { wwpLeosSystemMemoryUtilization 6 } -- 1.3.6.1.4.1.6141.2.60.12.1.13.7 wwpLeosSystemMemoryUtilizationAvailableMemoryState OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), degraded(3), faulted(4) } ACCESS read-only STATUS current DESCRIPTION "Current state of the available memory." ::= { wwpLeosSystemMemoryUtilization 7 } -- 1.3.6.1.4.1.6141.2.60.12.1.14 wwpLeosSystemGuardian OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 14 } -- 1.3.6.1.4.1.6141.2.60.12.1.14.1 wwpLeosSystemGuardianAdminEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS current DESCRIPTION "Sets the admin state for the system guardian. A reboot is required for changes to take effect" ::= { wwpLeosSystemGuardian 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.14.2 wwpLeosSystemGuardianOperEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), suspended(3) } ACCESS read-only STATUS current DESCRIPTION "Displays the current guardian operational state." ::= { wwpLeosSystemGuardian 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.14.3 wwpLeosSystemGuardianLimitNumReboots OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS current DESCRIPTION "Limits the number of consecutive guardian reboots to 3 if set to on." ::= { wwpLeosSystemGuardian 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.14.4 wwpLeosSystemGuardianConsecutiveReboots OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The current number of consecutive guardian reboots." ::= { wwpLeosSystemGuardian 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.14.5 wwpLeosSystemGuardianTotalReboots OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "The total number of guardian reboots." ::= { wwpLeosSystemGuardian 5 } -- 1.3.6.1.4.1.6141.2.60.12.1.15 wwpLeosSystemServers OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 15 } -- 1.3.6.1.4.1.6141.2.60.12.1.15.1 wwpLeosSystemSftpServerAdminState OBJECT-TYPE SYNTAX SystemServerAdminState ACCESS read-write STATUS current DESCRIPTION "Sets the administrative state for the SFTP server." ::= { wwpLeosSystemServers 1 } -- 1.3.6.1.4.1.6141.2.60.12.1.15.2 wwpLeosSystemFtpServerAdminState OBJECT-TYPE SYNTAX SystemServerAdminState ACCESS read-write STATUS current DESCRIPTION "Sets the administrative state for the FTP server." ::= { wwpLeosSystemServers 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.15.3 wwpLeosSystemTftpServerAdminState OBJECT-TYPE SYNTAX SystemServerAdminState ACCESS read-write STATUS current DESCRIPTION "Sets the administrative state for the TFTP server." ::= { wwpLeosSystemServers 3 } -- 1.3.6.1.4.1.6141.2.60.12.1.15.4 wwpLeosSystemScpServerAdminState OBJECT-TYPE SYNTAX SystemServerAdminState ACCESS read-write STATUS current DESCRIPTION "Sets the administrative state for the SCP server." ::= { wwpLeosSystemServers 4 } -- 1.3.6.1.4.1.6141.2.60.12.1.16 wwpLeosSystemClients OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBObjects 16 } -- 1.3.6.1.4.1.6141.2.60.12.1.16.2 wwpLeosSystemFtpClientAdminState OBJECT-TYPE SYNTAX SystemClientAdminState ACCESS read-write STATUS current DESCRIPTION "Sets the administrative state for the FTP client." ::= { wwpLeosSystemClients 2 } -- 1.3.6.1.4.1.6141.2.60.12.1.16.3 wwpLeosSystemTftpClientAdminState OBJECT-TYPE SYNTAX SystemClientAdminState ACCESS read-write STATUS current DESCRIPTION "Sets the administrative state for the TFTP client." ::= { wwpLeosSystemClients 3 } -- 1.3.6.1.4.1.6141.2.60.12.2 wwpLeosSystemConfigMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIB 2 } -- 1.3.6.1.4.1.6141.2.60.12.2.0 wwpLeosSystemConfigMIBNotifications OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBNotificationPrefix 0 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.1 wwpLeosImproperCmdInConfigFile NOTIFICATION-TYPE OBJECTS { wwpLeosSystemConfigFileName, wwpLeosSystemConfigErrLineNum, wwpLeosSystemConfigErrLinesTotal } STATUS current DESCRIPTION "A wwpLeosImproperCmdInConfigFile notif signifies that the SNMP entity, acting in an agent role, has counted the number of improper commands that were found in the configuration file while processing the wwpLeosSystemConfigFileName" ::= { wwpLeosSystemConfigMIBNotifications 1 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.2 wwpLeosSystemServiceModeChange NOTIFICATION-TYPE OBJECTS { wwpLeosSystemServiceMode } STATUS current DESCRIPTION "A wwpLeosSystemServiceModeChange notification is sent whenever someone changes the system service mode between mpls and pbt." ::= { wwpLeosSystemConfigMIBNotifications 2 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.3 wwpLeosSystemMemoryStatusNotification NOTIFICATION-TYPE OBJECTS { wwpLeosSystemMemoryUsageMemoryTotal, wwpLeosSystemMemoryUsageMemoryFree, wwpLeosSystemMemoryUsageStatus, wwpLeosSystemMemoryUsageMemoryAvailable } STATUS current DESCRIPTION "A wwpLeosSystemMemoryStatusNotification notification is sent whenever the system memory is below threshold limit." ::= { wwpLeosSystemConfigMIBNotifications 3 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.4 wwpLeosImproperCmdInConfigLineString NOTIFICATION-TYPE OBJECTS { wwpLeosSystemConfigErrStr, wwpLeosSystemConfigErrLineNum, wwpLeosSystemConfigFileName } STATUS current DESCRIPTION "A wwpLeosImproperCmdInConfigLineString notif signifies that the SNMP entity, acting in an agent role, has detected that improper commands were found in the configuration file while processing the wwpLeosSystemConfigFileName. wwpLeosSystemConfigErrStr will specify the commands which failed with the line number." ::= { wwpLeosSystemConfigMIBNotifications 4 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.5 wwpLeosSystemCpuUtilization5SecondStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemCpuUtilizationLast5Seconds, wwpLeosSystemCpuUtilizationLast5SecondsState } STATUS current DESCRIPTION "The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 5 second CPU utilization changes states." ::= { wwpLeosSystemConfigMIBNotifications 5 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.6 wwpLeosSystemCpuUtilization10SecondStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemCpuUtilizationLast10Seconds, wwpLeosSystemCpuUtilizationLast10SecondsState } STATUS current DESCRIPTION "The wwpLeosSystemCpuUtilization10SecondStatusTrap is sent when the 10 second CPU utilization changes states." ::= { wwpLeosSystemConfigMIBNotifications 6 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.7 wwpLeosSystemCpuUtilization60SecondStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemCpuUtilizationLast60Seconds, wwpLeosSystemCpuUtilizationLast60SecondsState } STATUS current DESCRIPTION "The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 60 second CPU utilization changes states." ::= { wwpLeosSystemConfigMIBNotifications 7 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.8 wwpLeosSystemCpu1MinLoadStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemCpuLoad1Min, wwpLeosSystemCpuLoad1MinState } STATUS current DESCRIPTION "The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over one minute changes states." ::= { wwpLeosSystemConfigMIBNotifications 8 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.9 wwpLeosSystemCpu5MinLoadStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemCpuLoad5Min, wwpLeosSystemCpuLoad5MinState } STATUS current DESCRIPTION "The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over five minutes changes states." ::= { wwpLeosSystemConfigMIBNotifications 9 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.10 wwpLeosSystemCpu15MinLoadStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemCpuLoad15Min, wwpLeosSystemCpuLoad15MinState } STATUS current DESCRIPTION "The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over fifteen minutes changes states." ::= { wwpLeosSystemConfigMIBNotifications 10 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.11 wwpLeosSystemMemoryUtilizationStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemMemoryUtilizationAvailableMemoryCurrent, wwpLeosSystemMemoryUtilizationAvailableMemoryState } STATUS current DESCRIPTION "The wwpLeosSystemMemoryUtilizationStatusTrap is sent when the memory utilization changes states." ::= { wwpLeosSystemConfigMIBNotifications 11 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.12 wwpLeosSystemFileSystemUtilizationTmpStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemFileSystemUtilizationTmpfsCurrent, wwpLeosSystemFileSystemUtilizationTmpfsState } STATUS current DESCRIPTION "The wwpLeosSystemFileSystemUtilizationTmpStatusTrap is sent when the usage of '/tmp/' changes states." ::= { wwpLeosSystemConfigMIBNotifications 12 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.13 wwpLeosSystemFileSystemUtilizationSysfsStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemFileSystemUtilizationSysfsCurrent, wwpLeosSystemFileSystemUtilizationSysfsState } STATUS current DESCRIPTION "The wwpLeosSystemFileSystemUtilizationSysfsStatusTrap is sent when the usage of '/mnt/sysfs/' changes states." ::= { wwpLeosSystemConfigMIBNotifications 13 } -- 1.3.6.1.4.1.6141.2.60.12.2.0.14 wwpLeosSystemFileSystemUtilizationXftpStatusTrap NOTIFICATION-TYPE OBJECTS { wwpLeosSystemFileSystemUtilizationXftpCurrent, wwpLeosSystemFileSystemUtilizationXftpState } STATUS current DESCRIPTION "The wwpLeosSystemFileSystemUtilizationXftpStatusTrap is sent when the usage of '/mnt/xftp/' changes states." ::= { wwpLeosSystemConfigMIBNotifications 14 } -- 1.3.6.1.4.1.6141.2.60.12.3 wwpLeosSystemConfigMIBConformance OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIB 3 } -- 1.3.6.1.4.1.6141.2.60.12.3.1 wwpLeosSystemConfigCompliances OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBConformance 1 } -- 1.3.6.1.4.1.6141.2.60.12.3.1.1 wwpLeosDefaultGatewayCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement of wwpLeosSystemConfigAttr." MODULE -- this module GROUP wwpLeosDefaultGatewayIPv6Group DESCRIPTION "This group is mandatory when IPv6 addresses are supported." OBJECT wwpLeosSystemConfigDefaultGatewayInetAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is only required to support IPv4 and IPv6 addresses without zone indices." ::= { wwpLeosSystemConfigCompliances 1 } -- 1.3.6.1.4.1.6141.2.60.12.3.1.2 wwpLeosBackupGatewayCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement of wwpLeosSystemConfigAttr." MODULE -- this module GROUP wwpLeosBackupGatewayIPv6Group DESCRIPTION "This group is mandatory when IPv6 addresses are supported." OBJECT wwpLeosSystemConfigBackupGatewayInetAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is only required to support IPv4 and IPv6 addresses without zone indices." ::= { wwpLeosSystemConfigCompliances 2 } -- 1.3.6.1.4.1.6141.2.60.12.3.2 wwpLeosSystemConfigMIBGroups OBJECT IDENTIFIER ::= { wwpLeosSystemConfigMIBConformance 2 } -- 1.3.6.1.4.1.6141.2.60.12.3.2.1 wwpLeosDefaultGatewayIPv6Group OBJECT-GROUP OBJECTS { wwpLeosSystemConfigDefaultGatewayInetAddrType, wwpLeosSystemConfigDefaultGatewayInetAddress } STATUS current DESCRIPTION "System config default gateway objects for supporting IPv6." ::= { wwpLeosSystemConfigMIBGroups 1 } -- 1.3.6.1.4.1.6141.2.60.12.3.2.2 wwpLeosBackupGatewayIPv6Group OBJECT-GROUP OBJECTS { wwpLeosSystemConfigBackupGatewayInetAddrType, wwpLeosSystemConfigBackupGatewayInetAddress } STATUS current DESCRIPTION "System config backup gateway objects for supporting IPv6." ::= { wwpLeosSystemConfigMIBGroups 2 } END