--****************************************************************
-- CISCO_DMN_DSG_DIAG.mib : Mib file for Detailed Diagnostics.
--
-- October 2010, Tel MIB Team
--
-- Copyright (c) 1999-2012 Cisco Systems, Inc. All rights reserved.
--****************************************************************

    CISCO-DMN-DSG-DIAG-MIB

 DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE, Integer32, Counter32
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    OBJECT-GROUP, MODULE-COMPLIANCE
        FROM SNMPv2-CONF
    ciscoDSGUtilities
        FROM CISCO-DMN-DSG-ROOT-MIB;


ciscoDSGDiag  MODULE-IDENTITY
    LAST-UPDATED  "201203200800Z" --  March 20 2012 08:00:00 GMT
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
       "Cisco Systems, Inc.
        Customer Service
        Postal: 170 W Tasman Drive
        San Jose, CA 95134
        USA
        Tel: +1 800 553 NETS

        E-mail: cs-ipsla@cisco.com"
    DESCRIPTION   "Cisco Detailed Diagnostics MIB."

    REVISION       "201203200800Z"
    DESCRIPTION    "V01.00.05 2012-03-20
                    Updated for D9854 R4 Release."

    REVISION        "201010130800Z"
    DESCRIPTION     "V01.00.04 2010-10-13
                    Type of diagFanRPMValue is changed to DisplayString."

                    REVISION        "201008031000Z"
    DESCRIPTION     "V01.00.03 2010-08-03
                    Health Monitor Table and Fan RPM Table are added."

    REVISION        "201004120900Z"
    DESCRIPTION     "V01.00.02 2010-04-12
                    powerOnFactoryResetCount and powerOnCurrentDateTime
                    MIB objects are added."

    REVISION        "201002121200Z"
    DESCRIPTION     "V01.00.01 2010-02-12
                    The Syntax of read-only objects is updated to
                    DisplayString."

    REVISION        "200912071200Z"
    DESCRIPTION     "V01.00.00 2009-12-07
                    Initial Version."

    ::= { ciscoDSGUtilities 18 }


powerOn                   OBJECT IDENTIFIER ::= { ciscoDSGDiag 1  }
diagTable                 OBJECT IDENTIFIER ::= { ciscoDSGDiag 2  }

-- *************************************
-- powerOn Branch
-- *************************************

powerOnCreationDate OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..30))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Build Date of Product."
    ::= { powerOn 1 }

powerOnDate OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..30))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Last Power-On Date."
    ::= { powerOn 2 }

powerOnTotalHours OBJECT-TYPE
    SYNTAX   DisplayString (SIZE(1..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total Hours Running.The range is from 0 to
        4294967295 hrs in steps of 1 hr."
    ::= { powerOn 3 }

powerOnHrsSinceLastPowerOff OBJECT-TYPE
    SYNTAX DisplayString (SIZE(1..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Hours Since Last Power Reset.The range is from 0 to
        4294967295 hrs in steps of 1 hr."
    ::= { powerOn 4 }

powerOnTotResetCount OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total Reset Counter.The range is from 0 to 4294967295."
    ::= { powerOn 5 }

powerOnClrableResetCount OBJECT-TYPE
    SYNTAX DisplayString (SIZE(1..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "User Clearable Reset Counter.The range is from 0 to
        4294967295."
    ::= { powerOn 6 }

powerOnReasonLastReset OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..127))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Reason for the Last Reset."
    ::= { powerOn 7 }

powerOnClearResetCounter OBJECT-TYPE
    SYNTAX  INTEGER {
                        writeOnly(1),
                        yes(2)
                    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set this object to yes(2) to clear Power On Reset counter."
    ::= { powerOn 8 }

powerOnFactoryResetCount OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..32 ))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total Factory Resets."
    ::= { powerOn 9 }

powerOnCurrentDateTime OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..32 ))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Displays the Current date and time."
    ::= { powerOn 10 }

--************************************
-- Diagnostics Table Group
--************************************

--************************************
-- Health Monitor Table Group
--************************************
diagHealthMonitorTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF DIAGHealthMonitorEntry
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "Health Monitor Table."
    ::= { diagTable 1 }

diagHealthMonitorEntry OBJECT-TYPE
    SYNTAX  DIAGHealthMonitorEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Entry for Health Monitor table."
    INDEX   { diagHealthMonitorIndex }
    ::= { diagHealthMonitorTable 1 }

DIAGHealthMonitorEntry ::=  SEQUENCE
{
    diagHealthMonitorIndex         Integer32,
    diagHealthMonitorName          DisplayString,
    diagHealthMonitorValue         DisplayString
}

diagHealthMonitorIndex  OBJECT-TYPE
    SYNTAX  Integer32 (0..1000)
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        " Health Monitor index."
    ::= { diagHealthMonitorEntry 1 }

diagHealthMonitorName  OBJECT-TYPE
    SYNTAX  DisplayString( SIZE(0..8) )
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "Health Monitor Item Name -
        Gives Board Current temperature if monitor index is CURTEMP
        Gives Board Maximum tempearture if monitor index is MAXTEMP
        Gives Board Average temperature if monitor index is AVGTEMP
        Gives Board Temperature at intake 1/intake 2 if monitor
        index is IN1VAL/INVAL2
        Gives Board FPGA Vicinity if monitor index is FPGAVIC
        Gives Board FPGA Value if monitor index is FPGAVAL."
    ::= { diagHealthMonitorEntry 2 }

diagHealthMonitorValue  OBJECT-TYPE
    SYNTAX  DisplayString ( SIZE(0..8) )
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "Health monitor Item Value."
    ::= { diagHealthMonitorEntry 3 }

--************************************
-- Fan RPM Table Group
--************************************
diagFanRPMTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF DIAGFanRPMEntry
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "Fan RPM Table."
    ::= { diagTable 2 }

diagFanRPMEntry OBJECT-TYPE
    SYNTAX  DIAGFanRPMEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Entry for Fan RPM table."
    INDEX   { diagFanRPMIndex }
    ::= { diagFanRPMTable 1 }

DIAGFanRPMEntry ::=  SEQUENCE
{
    diagFanRPMIndex                Integer32,
    diagFanRPMName                 DisplayString,
    diagFanRPMValue                DisplayString
}

diagFanRPMIndex  OBJECT-TYPE
    SYNTAX  Integer32 (0..2147483647)
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        " Fan RPM index."
    ::= { diagFanRPMEntry 1 }

diagFanRPMName  OBJECT-TYPE
    SYNTAX  DisplayString( SIZE(0..8))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "Fan RPM Item Name :
        Gives Fan 1 speed in rpm if Fan RPM index is FAN1
        Gives Fan 2 speed in rpm if Fan RPM index is FAN2
        Gives Fan 3 speed in rpm if Fan RPM index is FAN3
        Gives Fan 4 speed in rpm if Fan RPM index is FAN4
        Gives Fan 5 speed in rpm if Fan RPM index is FAN5
        Gives Fan 6 speed in rpm if Fan RPM index is FAN6
        Gives Fan 7 speed in rpm if Fan RPM index is FAN7."
    ::= { diagFanRPMEntry 2 }

diagFanRPMValue  OBJECT-TYPE
    SYNTAX  DisplayString( SIZE(0..8))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        " Health monitor Item Value."
    ::= { diagFanRPMEntry 3 }

--************************************
-- ECC Readings Table Group
--************************************
diagECCReadingsTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF DIAGECCReadingsEntry
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "ECC Readings Table."
    ::= { diagTable 3 }

diagECCReadingsEntry OBJECT-TYPE
    SYNTAX  DIAGECCReadingsEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Entry for ECC Readings table."
    INDEX   { diagECCReadingsIndex }
    ::= { diagECCReadingsTable 1 }

DIAGECCReadingsEntry ::=  SEQUENCE
{
    diagECCReadingsIndex             INTEGER,
    diagECCReadingsLocat             DisplayString,
    diagECCReadingsType              DisplayString,
    diagECCReadingsVal               DisplayString,
    diagECCReadingsApplicability     DisplayString
}

diagECCReadingsIndex  OBJECT-TYPE
    SYNTAX  INTEGER (1..15)
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "ECC Readings index."
    ::= { diagECCReadingsEntry 1 }

diagECCReadingsLocat  OBJECT-TYPE
    SYNTAX  DisplayString( SIZE(0..64))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "ECC Reading Location."
    ::= { diagECCReadingsEntry 2 }

diagECCReadingsType  OBJECT-TYPE
    SYNTAX  DisplayString( SIZE(0..64))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "ECC Reading Type."
    ::= { diagECCReadingsEntry 3 }

diagECCReadingsVal  OBJECT-TYPE
    SYNTAX  DisplayString( SIZE(0..64))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "ECC Reading Value."
    ::= { diagECCReadingsEntry 4 }

diagECCReadingsApplicability  OBJECT-TYPE
    SYNTAX  DisplayString( SIZE(0..64))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "ECC Reading Applicibility for this device."
    ::= { diagECCReadingsEntry 5 }

--************************************
-- Control History Table Group
--************************************
diagCtrlHistoryTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF DIAGCtrlHistoryEntry
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "Control History Table."
    ::= { diagTable 4 }

diagCtrlHistoryEntry OBJECT-TYPE
    SYNTAX  DIAGCtrlHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Entry for Control History table."
    INDEX   { diagCtrlHistoryIndex }
    ::= { diagCtrlHistoryTable 1 }

DIAGCtrlHistoryEntry ::=  SEQUENCE
{
    diagCtrlHistoryIndex             Counter32,
    diagCtrlHistoryHistory           DisplayString,
    diagCtrlHistoryDateTime          DisplayString
}

diagCtrlHistoryIndex  OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "Control History Table Index."
    ::= { diagCtrlHistoryEntry 1 }

diagCtrlHistoryHistory  OBJECT-TYPE
    SYNTAX  DisplayString( SIZE(0..64))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "Control History Text."
    ::= { diagCtrlHistoryEntry 2 }

diagCtrlHistoryDateTime  OBJECT-TYPE
    SYNTAX  DisplayString( SIZE(0..30))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "Control History Date and Time."
    ::= { diagCtrlHistoryEntry 3 }

END