-- ***************************************************************** -- CISCO-VOICE-DIAL-CONTROL-MIB.my: Voice Dial Control MIB file -- -- September 1996 Hongchi Shih -- -- Copyright (c) 1996-1999, 2000-2003, 2004-2006, 2009-2012 by cisco Systems Inc. -- All rights reserved. -- ***************************************************************** CISCO-VOICE-DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Gauge32, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, TimeStamp, PhysAddress, DateAndTime FROM SNMPv2-TC callActiveSetupTime, callActiveIndex, AbsoluteCounter32, callActivePeerAddress, callActivePeerId FROM DIAL-CONTROL-MIB QosService FROM INT-SERV-MIB ifIndex, InterfaceIndexOrZero FROM IF-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB cCallHistoryIndex, cCallHistoryCallOrigin FROM CISCO-DIAL-CONTROL-MIB CvcSpeechCoderRate, CvcFaxTransmitRate, CvcCoderTypeRate, CvcGUid, CvcInBandSignaling, cvCommonDcCallHistoryCoderTypeRate, CvcCallReferenceIdOrZero FROM CISCO-VOICE-COMMON-DIAL-CONTROL-MIB DnisMapname FROM CISCO-VOICE-DNIS-MIB ciscoMgmt FROM CISCO-SMI; ciscoVoiceDialControlMIB MODULE-IDENTITY LAST-UPDATED "201205150000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-voice@cisco.com" DESCRIPTION "This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing management of voice telephony peers on both a circuit-switched telephony network, and an IP data network. *** ABBREVIATIONS, ACRONYMS AND SYMBOLS *** GSM - Global System for Mobile Communication AMR-NB - Adaptive Multi Rate - Narrow Band iLBC - internet Low Bitrate Codec KPML - Key Press Markup Language MGCP - Media Gateway Control Protocol. SIP - Session Initiation Protocol. H323 - One of the voip signalling protocol. SCCP - Skinny Client Control Protocol. dialpeer - This represents a configured interface that carries the dial map. A dialpeer maps the called and calling numbers with the port or IP interface to be used. License call capacity - This represents the licensed maximum call capacity of the gateway. iSAC - Internet Speech Audio Codec RPH - Resource Priority Header DSCP - Diffserv Code Points" REVISION "201205150000Z" DESCRIPTION "[1] Added New OBJECT-GROUP cvCallVolumeStatsHistory in cvGatewayCallHistory. [2] Added following tables cvCallRateStatsTable, cvCallLegRateStatsTable, cvActiveCallStatsTable, cvCallDurationStatsTable, cvSipMsgRateStatsTable under cvCallVolumeStatsHistory [3] Added following tables cvCallRateWMTable, cvCallLegRateWMTable, cvActiveCallWMTable, cvSipMsgRateWMTable under cvCallVolumeStatsHistory [4] Added following textual conversation CvCallVolumeStatsIntvlType & CvCallVolumeWMIntvlType [5] Added new cvdcCallVolumeStatsHistory conformance group in cvdcMIBGroups. [6] Added cvdcMIBComplianceRev22 depricating cvdcMIBComplianceRev21" REVISION "201107110000Z" DESCRIPTION "[1] Added cvVoIPCallActiveSessionId in cvVoIPCallActiveEntry and cvVoIPCallHistorySessionId in cvVoIPCallHistoryEntry [2] Added cvVoIPCallActiveSessionId and cvVoIPCallHistorySessionId to cvVoIPCallGroupSup3 [3] Deprecated cvVoIPCallGroupSup2 and superceded it with cvVoIPCallGroupSup3 [4] Deprecated cvdcMIBComplianceRev20 and superceded it with with cvdcMIBComplianceRev21" REVISION "201105310000Z" DESCRIPTION "The following changes is done for RPH to DSCP mapping and Media policy feature. 1) Added two new objects in the cvVoIPCallActiveEntry ccVoIPCallActivePolicyName cvVoIPCallActiveReversedDirectionPeerAddress 2) Added one new notification object cvdcPolicyViolationNotification 3) Imported two objects from DIAL-CONTROL-MIB callActivePeerId callActivePeerAddress 4) Added four objects as part of new Notification cvdcPolicyViolationNotification ccVoIPCallActiveViolationReason cvVoIPCallActiveCalledNumber callActivePeerId callActivePeerAddress 5) Added new notification group cvdcNotificationGroupRev4 and changed the status of cvdcNotificationGroupRev3 to depricated. 6) Added new conformance group cvVoIPCallGroupSup2 and changed the status of cvVoIPCallGroupSup1 to deprecated. 7) Modified cvdcMIBComplianceRev20 to add new groups and remove the deprecated one 8) Added the following objects in CvVoIPPeerCfgEntry cvVoIPPeerCfgDSCPPolicyNotificationEnable cvVoIPPeerCfgMediaPolicyNotificationEnable 9) Added the following objects in cvdcGeneralCfgGroupRev6 cvGeneralDSCPPolicyNotificationEnable cvGeneralMediaPolicyNotificationEnable" REVISION "201007260000Z" DESCRIPTION "[1] Modified MAX-ACCESS for cvVoIPPeerCfgFrameSize from read-only to read-write. [2] Added a call reference ID to associate the video call entry and voice call entry of the same endpoint." REVISION "200905070000Z" DESCRIPTION "[1] Added Abbreviation for iSAC [2] Added the following objects to cvVoIPPeerCfgTable for iSAC codec support. - cvVoIPPeerCfgCodingMode - cvVoIPPeerCfgBitRate - cvVoIPPeerCfgFramesize [3] Added a new OBJECT-GROUP cvdcVoIPCfgISACGroup. [4] Added a new MODULE-COMPLIANCE cvdcMIBComplianceRev19 which deprecates cvdcMIBComplianceRev18." REVISION "200904200000Z" DESCRIPTION "The following changes have been made. [1] Added new CvCallConnectionType TEXTUAL-CONVENTION. [2] Added the following new OBJECT IDENTIFIERs: cvCallVolume, cvCallRateMonitor [3] Added the following objects to cvCallVolume: cvCallVolConnTable, cvCallVolConnTotalActiveConnections, cvCallVolConnMaxCallConnectionLicenese, cvCallVolPeerTable, cvCallVolIfTable. [4] Added the following objects to new cvCallVolConnTable: cvCallVolConnIndex, cvCallVolConnActiveConnection. [5] Added the following objects to new cvCallVolPeerTable: cvCallVolPeerIncomingCalls, cvCallVolPeerOutgoingCalls. [6] Added the following objects to new cvCallVolIfTable: cvCallVolMediaIncomingCalls, cvCallVolMediaOutgoingCalls. [7] Added the following objects to cvCallRateMonitor: cvCallRateMonitorEnable, cvCallRateMonitorTime, cvCallRate, cvCallRateHiWaterMark. [8] Add the following OBJECT-GROUPs: cvCallVolumeGroup, cvCallRateMonitorGroup. [9] Deprecated MODULE-COMPLIANCE cvdcMIBComplianceRev17. [10] Added MODULE-COMPLIANCE cvdcMIBComplianceRev18." REVISION "200901120000Z" DESCRIPTION "The following changes have been made. [1] The descriptions of the following objects have been modified to replace the term 'call identifier' with 'connection identifier'. cvCallActiveConnectionId cvVoIPCallActiveConnectionId cvCallHistoryConnectionId cvVoIPCallHistoryConnectionId. [2] The object cvCallActiveCallId has been added to cvCallActiveTable. [3] The object cvVoIPCallActiveCallId has been added to cvVoIPCallActiveTable. [4] The object cvCallHistoryCallId has been added to cvCallHistoryTable. [5] The object cvVoIPCallHistoryCallId has been added to cvVoIPCallHistoryTable. [6] 'sipKpml' has been added to the object cvVoIPPeerCfgDigitRelay. [7] Added following OBJECT-GROUPs cvCallGroupSup1, cvVoIPCallGroupSup1 [8] Deprecated MODULE-COMPLIANCE cvdcMIBComplianceRev16 and is superceded by cvdcMIBComplianceRev17." REVISION "200603120000Z" DESCRIPTION "[1] Added Abbreviations for GSM, AMR-NB and iLBC [2] Added cvVoIPPeerCfgCoderMode object to cvVoIPPeerCfgTable for iLBC codec support. [3] Added cvVoIPCallActiveCoderMode object to cvVoIPCallActiveTable for iLBC codec support. [4] Added cvVoIPCallHistoryCoderMode object to cvVoIPCallHistoryTable for iLBC codec support. [5] Created CvIlbcFrameMode textual convention. [6] Added REFERENCE clause to all new MIB objects and textual conventions added. [7] Created cvVoIPCallIlbcGroup and cvdcVoIPCfgIlbcGroup groups for iLBC specific objects. [8] Created module-compliance cvdcMIBComplianceRev16 and made cvVoIPCallIlbcGroup and cvdcVoIPCfgIlbcGroup as non mandatory. [9] Changed the default value for cvVoIPPeerCfgBitRates to all 8 bitrates as all 8 bitrates are supported." REVISION "200509290000Z" DESCRIPTION "Modified DESCRIPTION of cvPeerCfgPeerType object." REVISION "200507250000Z" DESCRIPTION "[1] Add new objects to cvVoIPCallActiveTable and cvVoIPCallHistoryTable for GSM AMR-NB codec support: Frame type, Bit rates, Mode change period, Mode change neighbor, Max payload time, CRC, Robust sorting, Encapsulation, Payload time channels, for call active and history table. [2] Add new objects to cvVoIPPeerCfgTable for GSM AMR-NB codec support: Frame type, Bit rates and CRC. [3] Created groups cvVoIPCallAmrNbGroup and cvdcVoIPCfgAmrNbGroup, for GSM AMR-NB specific objects. [4] Created a module-compliance cvdcMIBComplianceRev13 and made cvVoIPCallAmrNbGroup and cvdcVoIPCfgAmrNbGroup as non mandatory. [5] Created following textual conventions: CvAmrNbBitRateMode and CvAmrNbRtpEncap." REVISION "200503020000Z" DESCRIPTION "The following values were added to the cvVoicePeerCfgEchoCancellerTest object: echoCancellerG168Test5, echoCancellerG168Test7" REVISION "200503010000Z" DESCRIPTION "Modified DESCRIPTION of cvVoIPCallHistoryFallbackLoss object." REVISION "200404300000Z" DESCRIPTION "Added object Added cvVoIPCallHistoryRemSigIPAddrT and cvVoIPCallHistoryRemSigIPAddr to the cvdcFallbackNotification ." REVISION "200404160000Z" DESCRIPTION "Added object cvVoIPCallHistoryFallbackIcpif, cvVoIPCallHistoryFallbackLoss and cvVoIPCallHistoryFallbackDelay to the cvVoIPCallHistoryTable. Added cvdcFallbackNotification for the fallback notification. Added cvGeneralFallbackNotificationEnable to enable/disable cvdcFallbackNotification." REVISION "200403090000Z" DESCRIPTION "Added new objects for handling the following features: [1] The number of DS0s with voice calls up. cvCallActiveDS0s [2] The threshold number of DS0s above which a Notification will be triggered. cvCallActiveDS0sHighThreshold [3] The threshold number of DS0s below which a Notification will be triggered. cvCallActiveDS0sLowThreshold [4] Objects to enable the above two notifications. cvCallActiveDS0sHighNotifyEnable, cvCallActiveDS0sLowNotifyEnable. [5] Notifications for the above two thresholds. cvdcActiveDS0sHighNotification, cvdcActiveDS0sLowNotification." REVISION "200401200000Z" DESCRIPTION "Added object cvVoIPCallActiveSRTPEnable to cvVoIPCallActiveTable and cvVoIPCallHistorySRTPEnable to cvVoIPCallHistoryTable to indicate whether SRTP is enabled on a call." REVISION "200306260000Z" DESCRIPTION "Modified the DEVAL definition of cvVoIPPeerCfgDigitRelay object based on no bit field was enabled when the object was created." REVISION "200304140000Z" DESCRIPTION "The DESCRIPTION of the following objects was modified to specify the allowable characters cvPeerCommonCfgSourceTrunkGrpLabel cvPeerCommonCfgTargetTrunkGrpLabel cvPeerCommonCfgSourceCarrierId cvPeerCommonCfgTargetCarrierId." REVISION "200212310000Z" DESCRIPTION "The following values were added to the cvVoicePeerCfgEchoCancellerTest object: echoCancellerG168Test4, echoCancellerG168Test6, echoCancellerG168Test9" REVISION "200212020000Z" DESCRIPTION "The range of the following objects was changed: cvCallActiveNoiseLevel cvCallActiveACOMLevel cvCallActiveOutSignalLevel cvCallActiveInSignalLevel cvVoIPCallHistoryIcpif" REVISION "200210310000Z" DESCRIPTION "Add object cvVoIPPeerCfgMediaSetting to the table. This object defines whether IP-IP media streams will flow-through or flow-around the Gateway. Add two new objects cvVoIPPeerCfgDesiredQoSVideo and cvVoIPPeerCfgMinAcceptableQoSVideo to the table cvVoIPPeerCfgTable. Also added objects cvCallActiveAccountCode and cvCallHistoryAccountCode. Depreciating element cvCallActiveERLLevel Adding New element cvCallActiveERLLevelRev1 Adding New type sipNotify in cvVoIPPeerCfgDigitRelay Adding New element cvVoIPPeerCfgRedirectip2ip in CvVoIPPeerCfgEntry" REVISION "200207120000Z" DESCRIPTION "* Add a new cvPeerCfgPeerType object to define the peer type * Added rtpNte, a new value for the cvVoIPPeerCfgDigitRelay object." REVISION "200108200000Z" DESCRIPTION "Addition of the following objects: cvVoIPCallActiveUsername cvVoIPCallActiveProtocolCallId cvVoIPCallActiveRemSigIPAddrT cvVoIPCallActiveRemSigIPAddr cvVoIPCallActiveRemSigPort cvVoIPCallActiveRemMediaIPAddrT cvVoIPCallActiveRemMediaIPAddr cvVoIPCallActiveRemMediaPort cvVoIPCallHistoryUsername cvVoIPCallHistoryProtocolCallId cvVoIPCallHistoryRemSigIPAddrT cvVoIPCallHistoryRemSigIPAddr cvVoIPCallHistoryRemSigPort cvVoIPCallHistoryRemMediaIPAddrT cvVoIPCallHistoryRemMediaIPAddr cvVoIPCallHistoryRemMediaPort cvdcPoorQoVNotificationRev1 Deprecation of the following objects: cvVoIPCallActiveRemoteIPAddress cvVoIPCallActiveRemoteUDPPort cvVoIPCallHistoryRemoteIPAddress cvVoIPCallHistoryRemoteUDPPort cvdcPoorQoVNotification" REVISION "200107020000Z" DESCRIPTION "Add two new objects cvPeerCommonCfgSourceTrunkGrpLabel and cvPeerCommonCfgTargetTrunkGrpLabel." REVISION "200104100000Z" DESCRIPTION "[1] Add a new object for handling the following feature: Location in milliseconds of largest amplitude reflector detected by echo canceller in call active table. Add new object for specifying an echo canceller test to to be run when a call using a dial peer so configured is connected. [2] Change QosService import from INT-SERV-MIB to INTEGRATED-SERVICES-MIB, since INTEGRATED-SERVICES-MIB (RFC2213) is where QosService is defined." REVISION "200103250000Z" DESCRIPTION "Add two new objects cvPeerCommonCfgSourceCarrierId and cvPeerCommonCfgTargetCarrierId. Add a enum definition to cvVoIPPeerCfgSessionTarget object." REVISION "200005040000Z" DESCRIPTION "Add new objects for handling the following features: [1] Calling Name display for call active and history table. [2] Caller ID Block, which indicates whether the Caller ID feature is in using, for call active and history table." REVISION "200004190000Z" DESCRIPTION "Changed VoIP dialpeer default values for Icpif to 20 ExpectFactor to 0" REVISION "200003130000Z" DESCRIPTION "Adding a new object cvPeerCommonCfgDnisMappingName." REVISION "9906280000Z" DESCRIPTION "Moved common Textual Conventions and the following items in the VoIP Call Active and Call History tables to the CISCO-VOICE-COMMON-DIAL-CONTROL-MIB, as these items apply to multiple network encapsulations. CoderTypeRate VADEnable Added new objects for handling the following features: [1] Gatekeeper registration configuration for voice peer destination pattern. [2] Dialpeer huntstop configuration. [3] Voip configuration support for Coder Bytes, Fax Bytes, settlement server and inband signaling. Added the following objects to the cvdcPoorQoVNotification. cvVoIPCallHistoryRemoteIPAddress, cCallHistoryCallOrigin, cvCommonDcCallHistoryCoderTypeRate" REVISION "9901290000Z" DESCRIPTION "Add new enums in cvVoIPPeerCfgDigitRelay object for handling the transmission of dtmf digits across an H.245 channel via the signal and alphanumeric fields." REVISION "9809110000Z" DESCRIPTION "Add new objects for handling the following features: [1] FAX page count for call active and history table. [2] Peer Preference for peer configuration. [3] Add FAX rate 12000 bps, G723.1 Annex A codec support. [4] Technology prefix for VoIP encapsulated peer configuration. [5] Modify cvCallActiveACOMLeve, cvCallActiveERLLevel and cvCallHistoryACOMLevel to support undeterminable state. [6] Add digit relay configuration feature." REVISION "9802220000Z" DESCRIPTION "Add new objects for handling the following: [1] DNIS number matching. [2] Maximum connection to/from peer. [3] DID call treatment enable/disable. [4] Dial peer association to lower layer interfaces with CAS group. [5] Lost/Ealy/Late voice packets object in both call active and call history tables. [6] Update compliance statements." ::= { ciscoMgmt 63 } CvCallVolumeWMIntvlType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the Id of the watermark table. Here is what different values represent 1 : Seconds Table: Here the entries are among last 60 second 2 : Minutes Table: Here the entries are among last 60 minutes 3 : Hours Table: Here the entries are among last 72 Hours 4 : Uptime Table: Here the entries are from last reload/reboot" SYNTAX INTEGER { secondStats(1), minuteStats(2), hourStats(3), fromReloadStats(4) } CvCallVolumeStatsIntvlType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the ids of the stats vlolume table Here is what each entry corresponds. 1 : Seconds Table: Here each entry corresponds to a second 2 : Minutes Table: Here each entry corresponds to a minute 3 : Hours Table: Here each entry corresponds to an hour" SYNTAX INTEGER { secondStats(1), minuteStats(2), hourStats(3) } -- Textual Conventions -- -- -- Session Protocol textual convention CvSessionProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a Session Protocol used by Voice calls between a local and remote router via the IP backbone. other - none of the following. cisco - cisco proprietary H.323 Lite session protocol. sdp - Session Description Protocol. sip - Session Initiation Protocol. sccp - Skinny Call Control Protocol." SYNTAX INTEGER { other(1), cisco(2), sdp(3), sip(4), multicast(5), sccp(6) } -- Channel Associated Signalling Group (CAS) group definition CvCasGroup ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The Channel Associated Signalling Group of a T1/E1. The valid CAS group range is from 0 to 23 for T1 and from 0 to 30 for E1. The value -1 indicates CAS group is disabled." SYNTAX Integer32 (-1..30) -- GSM AMR-NB Bit rate modes CvAmrNbBitRateMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents GSM AMR-NB bit rate modes. CodecMode Bit-rate (kbps) 0 4.75 1 5.15 2 5.90 3 6.70 4 7.40 5 7.95 6 10.2 7 12.2" SYNTAX BITS { amrBitRateMode0(0), amrBitRateMode1(1), amrBitRateMode2(2), amrBitRateMode3(3), amrBitRateMode4(4), amrBitRateMode5(5), amrBitRateMode6(6), amrBitRateMode7(7) } -- GSM AMR-NB Encapsulation types CvAmrNbRtpEncap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents GSM AMR-NB codec RTP encapsulation type." SYNTAX INTEGER { rfc3267(1) } -- iLBC codec modes CvIlbcFrameMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Texatual Convention represents the iLBC codec frame modes. The possible values are : frameMode20: This mode operates at 15.2 kbps and each frame is packetized in 38 bytes. frameMode30: This mode operates at 13.33 kbps and each frame is packetized in 50 bytes." REFERENCE "RFC 3952: Section 4.2 for details about iLBC mode" SYNTAX INTEGER { frameMode20(20), frameMode30(30) } -- call connection textual convention CvCallConnectionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Call connection represents the connection/association/session between two media call end points. Following are the different connection types. h323 - h323 protocol. sip - Session Initiation Protocol. mgcp - Media Gateway Control Protocol. sccp - Cisco proprietary Skinny Call Control Protocol. multicast - multicast call connections. cacontrol - Call Agent Control. telephony - telephony signal call connections." SYNTAX INTEGER { h323(1), sip(2), mgcp(3), sccp(4), multicast(5), cacontrol(6), telephony(7) } -- Overview of Voice Gateway Call between Data and Telephony network -- -- | Network | Voice | Voice | Telephony | -- <========+== Protocol ==+=Gateway=+=== Peer ===+= Interfaces =+==========> -- Data | : I | U | R | | | DS0 T1/E1 | Telephony -- Network | P | D | T | voice | Voice | ISDN B | Network -- | | P | P | session |encapsulation FXO | -- | | | | protocol| | E&M | -- | | | | | | FXS | -- |Voice P| -- <==========================+Packet<=*=>C+================> -- Voice packet | M PCM data -- CODEC -- -- CODEC: Coder and Decoder. -- PCM : Pulse Code Modulation. -- -- Voice Gateway call leg connections are as follows: -- -- [1] Call establishment using a local telephony interface -- Call establishment using a local telephony interface involves -- the Voice Session Control module, the Voice/FAX Protocol module, -- and the Telephony interface itself. Voice Session Control is -- responsible for controlling the local telephony interfaces and -- assigning a Voice/FAX encapsulation module, with its associated -- CODEC (most CODECs execute in DSP code) to the call. The CODEC is -- responsible for encode/decode, as well has the generation and -- detection of signaling information, such as call progress tones, -- DTMF or pulse dialing signals, etc. During an active call, the -- selected CODEC is responsible for collecting the voice and fax -- statistics for the call. -- -- [2] Call establishment using the session protocol over IP backbone -- Call establishment using the session protocol over IP backbone -- involves the Voice Session Control module, VoIP encapsulation -- module, and RTP protocol module. Voice Session Control is -- responsible for controlling the selected session protocol and -- assigning a VoIP encapsulation module with its associated RTP -- (real-time transport protocol) connection to a VoIP call. For an -- active VoIP call, the RTP protocol is responsible for collecting -- the voice packet statistics for the call. -- -- This MIB uses IETF Dial Control MIB (RFC2128) as a base and adds -- features to support voice calls via a Voice-over-IP gateway. The -- supports connection establishment of both telephony circuit-switched -- call and the Voice-over-IP session. -- The following architectural diagram illustrates this: -- -- +================================================================+ -- | Voice Gateway | -- +===+ +=========+ +=======+ +=======+ +==========+ +=============+ -- | | | | | | | | | | -- | | | | | | | | | | -- | | | | | | | | | | -- | | | | | | | | | | -- | | | | | | | | | | -- | | | | | | | | | | -- | | | | | | | | | |<== appears -- | | | | | | | | | | active -- +=+ +=+ +=+ +=+ +=+ +=+ +=+ +=+ +=+ +=+ -- |VOICE| |VOICE| |VOICE| |VOICE| |VoIP | VOICE -- | for | | for | | for | | for | | for | ifEntry with -- |Peer1| |Peer2| |Peer3| |Peer4| |Peer5| shadow -- | | | | | | | | | | Voice PeerEntry -- +=====+ +=+ +=+ +=+ +=+ +=+ +=+ +=====+ -- | | | | | | <== appears -- +=======+ +==+ +==+ +==+ +==+ | | active when -- | B | | B | | DS0 | | | the VOICE -- |channel| |channel| |channel| | | connects to -- +==+ +==+ +==+ +==+ +==+ +==+ | | telephony -- | | | | | | | | interface -- +===+ +=========+ +==+ +==+ +==+ +==+ +======+ -- | ISDN BRI/PRI | | T1/E1 | |E&M/FXO/FXS| -- +====================+ +=======+ +===========+ -- -- In this model, each voice peer must have an associated VOICE -- encapsulation interface ifEntry. Grouping of peer entries is -- supported through the dialCtlPeerCfgId of the IETF Dial Control MIB, -- allowing the particular type of telephony interfaces for a call to -- be selected at call establishment time. -- -- The VOICE encapsulation interface is normally used to convert -- between PCM (pulse code modulation) voice produced and consumed by -- the lower layer telephony interfaces and compressed packetized voice -- exchanged between the CODEC and the voice session control module. -- -- Each VOICE encapsulation ifEntry contains the ifType 'voiceEncap'. -- The VOICE interface for each voice peer correlates to lower-level -- telephony interface via ifStackTable. -- -- Each VoIP encapsulation ifEntry contains the ifType 'voiceOverIp' -- For each VoIP encapsulation associated peer, the -- dialCtlPeerCfgIfType object of IETF Dial Control MIB must set to -- 'other' and dialCtlPeerCfgLowerIf must set to '0'. -- -- -- Support for generic peers -- -- Generic Voice related Peers can be supported by permitting the left -- justified substring of a phone number in -- dialCtlPeerCfgOriginateAddress and dialCtlPeerCfgAnswerAddress of -- IETF Dial control MIB for specifying a group of voice encapsulation -- and voice over IP peers. -- The leading '+' in these two objects indicates the E.164 phone -- number (e.g. +1408526, +1408, +1, +) substring. -- -- The dialCtlPeerCfgOriginateAddress of the peer contains a wild-card -- number for the outgoing call. For example, the '+1408526' in -- dialCtlPeerCfgOriginateAddress means that the peer is used for the -- outgoing call to the phones with a number of the form 1-408-526-xxxx. -- -- The dialCtlPeerCfgAnswerAddress of the voice encapsulation peer -- contains the same type of regular expression as the one that is -- specified in dialCtlPeerCfgOriginateAddress for filtering incoming -- call from telephony interface. -- -- The dialCtlPeerCfgAnswerAddress of the voice over IP peer contains -- an IP address wild-card (with regular expression rule) for filtering -- the incoming call from IP backbone. -- -- ifEntry for the 'voiceEncap' Encapsulation -- -- The ifEntry for the 'voiceEncap' encapsulation supports the -- ifGeneralInformationGroup of Cisco IF-MIB. -- -- ifTable Comments -- ============== =========================================== -- ifIndex Each voice encapsulation is represented by an -- ifEntry. -- ifDescr Textual description -- "Voice Encapsulation: ". -- ifType The IANA value of voiceEncap(103). -- ifSpeed contains a zero value. -- ifPhysAddress contains an octet string of zero length. -- -- ifAdminStatus The desired administrative status of the -- voice encapsulation. -- ifOperStatus The current operational status of the voice -- encapsulation. -- ifLastChange Refer to RFC 1573. -- ifLinkUpDownTrapEnable -- Only support the read-only ifLinkUpDownTrapEnable. -- It contains a 'disabled(2)' value. -- ifConnectorPresent -- Refer to RFC 1573. -- ifHighSpeed contains a zero value. -- ifName Refer to RFC 1573. -- ifAlias Refer to RFC 1573. -- -- -- ifEntry for the 'voiceOverIp' encapsulation -- -- The ifEntry for the 'voiceOverIp' encapsulation supports the -- ifGeneralInformationGroup of Cisco IF-MIB -- -- ifTable Comments -- ============== =========================================== -- ifIndex Each voiceOverIp encapsulation is represented by -- an ifEntry. -- ifDescr Textual description -- "Voice Over IP Encapsulation: ". -- ifType The IANA value of voiceOverIp(104). -- ifSpeed contains a zero value. -- ifPhysAddress contains an octet string of zero length. -- -- ifAdminStatus The desired administrative status of the -- VoIP encapsulation. -- ifOperStatus The current operational status of the VoIP -- encapsulation. -- ifLastChange Refer to RFC 1573. -- ifLinkUpDownTrapEnable -- Only support the read-only ifLinkUpDownTrapEnable. -- It contains a 'disabled(2)' value. -- ifConnectorPresent -- Refer to RFC 1573. -- ifHighSpeed contains a zero value. -- ifName Refer to RFC 1573. -- ifAlias Refer to RFC 1573. -- -- -- Voice Dial Control MIB objects definitions cvdcMIBObjects OBJECT IDENTIFIER ::= { ciscoVoiceDialControlMIB 1 } -- The Voice Dial Control MIB consists of the following group -- [1] Voice Dial Control General Configuration group -- (cvGeneralConfiguration) -- [2] Voice Dial Control Peer Group (cvPeer) -- [3] Voice Dial Control Gateway Call Active Group -- (cvGatewayCallActive) -- [4] Voice Dial Control Gateway Call History Group -- (cvGatewayCallHistory) cvGeneralConfiguration OBJECT IDENTIFIER ::= { cvdcMIBObjects 1 } cvPeer OBJECT IDENTIFIER ::= { cvdcMIBObjects 2 } cvGatewayCallActive OBJECT IDENTIFIER ::= { cvdcMIBObjects 3 } cvGatewayCallHistory OBJECT IDENTIFIER ::= { cvdcMIBObjects 4 } -- ******************************************************************** -- Voice Dial Control General Configuration Group -- ******************************************************************** -- -- Voice Dial Control general configuration data/parameters cvGeneralPoorQoVNotificationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether cvdcPoorQoVNotification (or the newer cvdcPoorQoVNotificationRev1) traps should be generated for a poor quality of voice calls. If the value of this object is 'true', cvdcPoorQoVNotification (or the newer cvdcPoorQoVNotificationRev1) traps will be generated for all voice over IP peers when a poor quality of voice call condition is detected after the voice gateway call disconnection. If the value of this object is 'false', cvdcPoorQoVNotification (or the newer cvdcPoorQoVNotificationRev1) traps will be generated only for calls for which the cvVoIPPeerCfgPoorQoVNotificationEnable object of voice over IP peers having set to 'true'." DEFVAL { false } ::= { cvGeneralConfiguration 1 } cvGeneralFallbackNotificationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether cvdcFallbackNotification traps should be generated for fallback. If the value of this object is 'true', cvdcFallbackNotification traps will be generated for all voice over IP peers." DEFVAL { false } ::= { cvGeneralConfiguration 2 } cvGeneralDSCPPolicyNotificationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether cvdcPolicyViolationNotification traps should be generated for a RPH to DSCP mapping violation for SIP voice calls. If the value of this object is 'true', cvdcPolicyViolationNotification traps will be generated for SIP voice over IP peers when a RPH to DSCP violation condition is detected . If the value of this object is 'false', cvdcPolicyViolationNotification traps will be generated only for calls for which the cvVoIPPeerCfgDSCPPolicyNotificationEnable object of voice over IP peers having set to 'true'." DEFVAL { false } ::= { cvGeneralConfiguration 3 } cvGeneralMediaPolicyNotificationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether cvdcPolicyViolationNotification traps should be generated for Media violation for SIP voice calls. If the value of this object is 'true', cvdcPolicyViolationNotification traps will be generated for SIP voice over IP peers when media violation condition is detected . If the value of this object is 'false', cvdcPolicyViolationNotification traps will be generated only for calls for which the cvVoIPPeerCfgMediaPolicyNotificationEnable object of voice over IP peers having set to 'true'." DEFVAL { false } ::= { cvGeneralConfiguration 4 } -- ********************************************************************* -- Voice Dial Control Peer Group -- ********************************************************************* -- The objects in this group are responsible for the voice related peer -- configuration which controls the dial string and the interface or -- session target for the call establishment to a peer on the telephony -- network or on the IP backbone. -- -- Voice Generic Peer Configuration Table cvPeerCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CvPeerCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the Voice Generic Peer information that is used to create an ifIndexed row with an appropriate ifType that is associated with the cvPeerCfgType and cvPeerCfgPeerType objects." ::= { cvPeer 1 } cvPeerCfgEntry OBJECT-TYPE SYNTAX CvPeerCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single voice generic Peer. The creation of this entry will create an associated ifEntry with an ifType that is associated with cvPeerCfgType, i.e., for 'voiceEncap' encapsulation, an ifEntry will contain an ifType voiceEncap(103); for 'voiceOverIp' encapsulation, an ifEntry will contain an ifType voiceOverIp(104). The ifAdminStatus of the newly created ifEntry is set to 'up' and ifOperStatus is set to 'down'. In addition, an associated voiceEncap/voiceOverIp Peer configuration entry is created after the successful ifEntry creation. Then ifIndex of the newly created ifEntry must be used by the network manager to create a peer configuration entry of IETF Dial Control MIB (Refer to RFC 2128 section 2.2.3.1 and the description of dialCtlPeerCfgEntry for the detailed information). In summary, the voice dial peer creation steps are as follows: [1] create this entry (voice/data generic peer entry). [2] read the cvPeerCfgIfIndex of this entry for the ifIndex of newly created voice/data generic peer. [3] create the dialCtlPeerCfgEntry of RFC 2128 with the indices of dialCtlPeerCfgId and the ifIndex of newly created voice generic peer. For each VoIP peer, it uses IP address and UDP port with RTP protocol to transfer voice packet. Therefore, it does not have its lower layer interface. The dialCtlPeerCfgIfType object of IETF Dial Control MIB must set to 'other' and the dialCtlPeerCfgLowerIf must set to '0'. After the successful creation of peer configuration entry of IETF Dial Control MIB, the dial plan software in managed device will set the ifOperStatus of the newly created voiceEncap/voiceOverIp ifEntry to 'up' for enabling the peer function if the peer configuration is completed. When this entry is deleted, its associated ifEntry, voiceEncap/voiceOverIp specific peer entry and the peer entry of IETF Dial Control MIB are deleted." INDEX { cvPeerCfgIndex } ::= { cvPeerCfgTable 1 } CvPeerCfgEntry ::= SEQUENCE { cvPeerCfgIndex Integer32, cvPeerCfgIfIndex InterfaceIndexOrZero, cvPeerCfgType INTEGER, cvPeerCfgRowStatus RowStatus, cvPeerCfgPeerType INTEGER } cvPeerCfgIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary index that uniquely identifies a generic voice peer." ::= { cvPeerCfgEntry 1 } cvPeerCfgIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the peer associated ifEntry. The ifIndex appears after the associated ifEntry is created successfully. This ifIndex will be used to access the objects in the Voice over Telephony or Voice over IP peer specific table. In addition, the ifIndex is also used to access the associated peer configuration entry of the IETF Dial Control MIB. If the peer associated ifEntry had not been created, then this object has a value of zero." ::= { cvPeerCfgEntry 2 } cvPeerCfgType OBJECT-TYPE SYNTAX INTEGER { voice(1), voip(2), mmail(3), voatm(4), vofr(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of voice related encapsulation. voice - voice encapsulation (voiceEncap ifType) on the telephony network. voip - VoIP encapsulation (voiceOverIp ifType) on the IP network. mmail - Media Mail over IP encapsulation (mediaMailOverIp ifType) on the IP network. voatm - VoATM encapsulation (voiceOverATM ifType) on the ATM network. vofr - VoFR encapsulation (voiceOverFR ifType) on the Frame Relay network." DEFVAL { voice } ::= { cvPeerCfgEntry 3 } cvPeerCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table." ::= { cvPeerCfgEntry 4 } cvPeerCfgPeerType OBJECT-TYPE SYNTAX INTEGER { voice(1), data(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of a peer. voice - peer in voice type to be defined in a voice gateway for voice calls. data - peer in data type to be defined in gateway that supports universal ports for modem/data calls and integrated ports for data calls." DEFVAL { voice } ::= { cvPeerCfgEntry 5 } -- Voice over Telephony specific Peer Configuration Table cvVoicePeerCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CvVoicePeerCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the Voice over Telephony peer specific information that is required to accept voice calls or to which it will place them or perform various loopback tests via interface." ::= { cvPeer 2 } cvVoicePeerCfgEntry OBJECT-TYPE SYNTAX CvVoicePeerCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single Voice specific Peer. One entry per voice encapsulation. The entry is created when its associated 'voiceEncap(103)' encapsulation ifEntry is created. This entry is deleted when its associated ifEntry is deleted." INDEX { ifIndex } ::= { cvVoicePeerCfgTable 1 } CvVoicePeerCfgEntry ::= SEQUENCE { cvVoicePeerCfgSessionTarget DisplayString, cvVoicePeerCfgDialDigitsPrefix DisplayString, cvVoicePeerCfgDIDCallEnable TruthValue, cvVoicePeerCfgCasGroup CvCasGroup, cvVoicePeerCfgRegisterE164 TruthValue, cvVoicePeerCfgForwardDigits Integer32, cvVoicePeerCfgEchoCancellerTest INTEGER } cvVoicePeerCfgSessionTarget OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the session target of the peer. Session Targets definitions: The session target has the syntax used by the IETF service location protocol. The syntax is as follows: mapping-type:type-specific-syntax the mapping-type specifies a scheme for mapping the matching dial string to a session target. The valid Mapping type definitions for the peer are as follows: loopback - Syntax: loopback:where 'where' string is defined as follows: compressed - loopback is performed on compressed voice as close to the CODEC which processes the data as possible. uncompressed - loopback is performed on the PCM or analog voice as close to the telephony endpoint as possible. Local loopback case: uncompressed - the PCM voice coming into the DSP is simply turned around and sent back out, allowing testing of the transmit--> receive paths in the telephony endpoint. compressed - the compressed voice coming out of the CODEC is turned around on the DSP module and fed back into the decompressor through the jitter buffer. In addition to the telephony endpoint, this tests both the encode and decode paths without involving data paths or packet handling on the host router. Remote loopback case: compressed - RTP packets received from the network are decapsulated and passed to the DSP board. Instead of feeding these into the CODEC for decompression, they are immediately sent back to the session application as if they had originated locally and been compressed. uncompressed - In addition to the above, the voice samples are sent all the way through the CODEC and then turned around instead of being sent to the telephony endpoint" DEFVAL { "" } ::= { cvVoicePeerCfgEntry 1 } cvVoicePeerCfgDialDigitsPrefix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the prefix of the dial digits for the peer. The dial digits prefix is sent to telephony interface before the real phone number when the system places the outgoing call to the voice encapsulation peer over telephony interface." DEFVAL { "" } ::= { cvVoicePeerCfgEntry 2 } cvVoicePeerCfgDIDCallEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object enables/disables the DID call treatment for incoming DNIS digits. true - treat the incoming DNIS digits as if the digits are received from DID trunk. false - Disable DID call treatment for incoming DNIS digits." DEFVAL { false } ::= { cvVoicePeerCfgEntry 3 } cvVoicePeerCfgCasGroup OBJECT-TYPE SYNTAX CvCasGroup MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the CAS group number of a CAS capable T1/E1 that is in the dialCtlPeerCfgLowerIf object of RFC2128. This object can be set to a valid CAS group number only if the dialCtlPeerCfgLowerIf contains a valid ifIndex for a CAS capable T1/E1. The object must set to -1 before the value of the dialCtlPeerCfgLowerIf object of RFC2128 can be changed." DEFVAL { -1 } ::= { cvVoicePeerCfgEntry 4 } cvVoicePeerCfgRegisterE164 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies that the E.164 number specified in the dialCtlPeerCfgOriginateAddress field of the associated dialCtlPeerCfgTable entry be registered as an extension phone number of this gateway for H323 gatekeeper and/or SIP registrar." DEFVAL { false } ::= { cvVoicePeerCfgEntry 5 } cvVoicePeerCfgForwardDigits OBJECT-TYPE SYNTAX Integer32 (-3..32) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of dialed digits to forward to the remote destination in the setup message. The object can take the value: 0-32 number of right justified digits to forward -1 default -2 forward extra digits i.e those over and above those needed to match to the destination pattern -3 forward all digits" DEFVAL { 0 } ::= { cvVoicePeerCfgEntry 6 } cvVoicePeerCfgEchoCancellerTest OBJECT-TYPE SYNTAX INTEGER { echoCancellerTestNone(1), echoCancellerG168Test2A(2), echoCancellerG168Test2B(3), echoCancellerG168Test2Ca(4), echoCancellerG168Test2Cb(5), echoCancellerG168Test3A(6), echoCancellerG168Test3B(7), echoCancellerG168Test3C(8), echoCancellerG168Test4(9), echoCancellerG168Test6(10), echoCancellerG168Test9(11), echoCancellerG168Test5(12), echoCancellerG168Test7(13) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies which, if any, test to run in the echo canceller when a call from the network is connected. echoCancellerTestNone - do not run a test. echoCancellerG168Test2A - run ITU-T G.168 Test 2A. echoCancellerG168Test2B - run ITU-T G.168 Test 2B. echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a). echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b). echoCancellerG168Test3A - run ITU-T G.168 Test 3A. echoCancellerG168Test3B - run ITU-T G.168 Test 3B. echoCancellerG168Test3C - run ITU-T G.168 Test 3C. echoCancellerG168Test4 - run ITU-T G.168 Test 4. echoCancellerG168Test5 - run ITU-T G.168 Test 5. echoCancellerG168Test6 - run ITU-T G.168 Test 6. echoCancellerG168Test7 - run ITU-T G.168 Test 7. echoCancellerG168Test9 - run ITU-T G.168 Test 9." REFERENCE "ITU-T G.168(04/2000): Section 6.4 Tests and requirements for performance with input signals applied to the send and receive paths." DEFVAL { echoCancellerTestNone } ::= { cvVoicePeerCfgEntry 7 } -- Voice over IP specific Peer Configuration Table cvVoIPPeerCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CvVoIPPeerCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the Voice over IP (VoIP) peer specific information that is required to accept voice calls or to which it will place them via IP backbone with the specified session protocol in cvVoIPPeerCfgSessionProtocol." ::= { cvPeer 3 } cvVoIPPeerCfgEntry OBJECT-TYPE SYNTAX CvVoIPPeerCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single VoIP specific Peer. One entry per VoIP encapsulation. The entry is created when its associated 'voiceOverIp(104)' encapsulation ifEntry is created. This entry is deleted when its associated ifEntry is deleted." INDEX { ifIndex } ::= { cvVoIPPeerCfgTable 1 } CvVoIPPeerCfgEntry ::= SEQUENCE { cvVoIPPeerCfgSessionProtocol CvSessionProtocol, cvVoIPPeerCfgDesiredQoS QosService, cvVoIPPeerCfgMinAcceptableQoS QosService, cvVoIPPeerCfgSessionTarget DisplayString, cvVoIPPeerCfgCoderRate CvcSpeechCoderRate, cvVoIPPeerCfgFaxRate CvcFaxTransmitRate, cvVoIPPeerCfgVADEnable TruthValue, cvVoIPPeerCfgExpectFactor Integer32, cvVoIPPeerCfgIcpif Integer32, cvVoIPPeerCfgPoorQoVNotificationEnable TruthValue, cvVoIPPeerCfgUDPChecksumEnable TruthValue, cvVoIPPeerCfgIPPrecedence Integer32, cvVoIPPeerCfgTechPrefix DisplayString, cvVoIPPeerCfgDigitRelay BITS, cvVoIPPeerCfgCoderBytes Integer32, cvVoIPPeerCfgFaxBytes Integer32, cvVoIPPeerCfgInBandSignaling CvcInBandSignaling, cvVoIPPeerCfgMediaSetting INTEGER, cvVoIPPeerCfgDesiredQoSVideo QosService, cvVoIPPeerCfgMinAcceptableQoSVideo QosService, cvVoIPPeerCfgRedirectip2ip TruthValue, cvVoIPPeerCfgOctetAligned TruthValue, cvVoIPPeerCfgBitRates CvAmrNbBitRateMode, cvVoIPPeerCfgCRC TruthValue, cvVoIPPeerCfgCoderMode CvIlbcFrameMode, cvVoIPPeerCfgCodingMode INTEGER, cvVoIPPeerCfgBitRate Unsigned32, cvVoIPPeerCfgFrameSize INTEGER, cvVoIPPeerCfgDSCPPolicyNotificationEnable TruthValue, cvVoIPPeerCfgMediaPolicyNotificationEnable TruthValue } cvVoIPPeerCfgSessionProtocol OBJECT-TYPE SYNTAX CvSessionProtocol MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the session protocol to be used for Internet call between local and remote router via IP backbone." DEFVAL { cisco } ::= { cvVoIPPeerCfgEntry 1 } cvVoIPPeerCfgDesiredQoS OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the user requested Quality of Service for the call." DEFVAL { bestEffort } ::= { cvVoIPPeerCfgEntry 2 } cvVoIPPeerCfgMinAcceptableQoS OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the minimally acceptable Quality of Service for the call." DEFVAL { bestEffort } ::= { cvVoIPPeerCfgEntry 3 } cvVoIPPeerCfgSessionTarget OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the session target of the peer. Session Targets definitions: The session target has the syntax used by the IETF service location protocol. The syntax is as follows: mapping-type:type-specific-syntax the mapping-type specifies a scheme for mapping the matching dial string to a session target. The type-specific-syntax is exactly that, something that the particular mapping scheme can understand. For example, Session target Meaning ipv4:171.68.13.55:1006 The session target is the IP version 4 address of 171.68.13.55 and port 1006. dns:pots.cisco.com:1661 The session target is the IP host with dns name pots.cisco.com, and port 1661. ras The session target is the gatekeeper with RAS (Registration , Admission, Status protocol). settlement The session target is the settlement server. enum:1 The session target is the enum profile match table 1. The valid Mapping type definitions for the peer are as follows: ipv4 - Syntax: ipv4:w.x.y.z:port or ipv4:w.x.y.z dns - Syntax: dns:host.domain:port or dns:host.domain ras - Syntax: ras settlement - Syntax: settlement enum - Syntax: enum: loopback - Syntax: loopback:where 'where' string is defined as follows: rtp - loopback is performed at the transport protocol level. Local loopback case: rtp - the session application sets up an RTP stream to itself (i.e. actually allocates a port pair and opens the appropriate UDP sockets). It then does the full RTP encapsulation, sends the packets to the loopback IP address, receives the RTP packets, and hands the compressed voice back to the CODEC. This tests the entire local processing path, both transmit and receive, in the router, as well as all of the above paths. Remote loopback case: rtp: RTP packets received from the network are decapsulated and immediately re-encapsulated in the outbound RTP stream, using the same media clock (i.e. timestamp) as the received packet. They are then sent back to the remote source router as if the voice had originated on a telephony port on the local router." DEFVAL { "" } ::= { cvVoIPPeerCfgEntry 4 } cvVoIPPeerCfgCoderRate OBJECT-TYPE SYNTAX CvcSpeechCoderRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the most desirable codec of speech for the VoIP peer." DEFVAL { g729IETFr8000 } ::= { cvVoIPPeerCfgEntry 5 } cvVoIPPeerCfgFaxRate OBJECT-TYPE SYNTAX CvcFaxTransmitRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default transmit rate of FAX the VoIP peer. If the value of this object is 'none', then the Fax relay feature is disabled; otherwise the Fax relay feature is enabled." DEFVAL { voiceRate } ::= { cvVoIPPeerCfgEntry 6 } cvVoIPPeerCfgVADEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether or not the VAD (Voice Activity Detection) voice data is continuously transmitted to IP backbone." DEFVAL { true } ::= { cvVoIPPeerCfgEntry 7 } cvVoIPPeerCfgExpectFactor OBJECT-TYPE SYNTAX Integer32 (0..20) UNITS "equipment impairment factor (eif)" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the user requested Expectation Factor of voice quality for the call via this peer." REFERENCE "ITU G.113: Sections 8 Considerations Concerning the Expectation Factor A." DEFVAL { 0 } ::= { cvVoIPPeerCfgEntry 8 } cvVoIPPeerCfgIcpif OBJECT-TYPE SYNTAX Integer32 (0..55) UNITS "equipment impairment factor (eif)" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the user requested Calculated Planning Impairment Factor (Icpif) for the call via this peer." REFERENCE "ITU G.113: Sections 9 Considerations associated with the Calculated Planning Impairment Factor (Icpif)" DEFVAL { 20 } ::= { cvVoIPPeerCfgEntry 9 } cvVoIPPeerCfgPoorQoVNotificationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether cvdcPoorQoVNotification (or the newer cvdcPoorQoVNotificationRev1) traps should be generated for the call that is associated with this peer." DEFVAL { false } ::= { cvVoIPPeerCfgEntry 10 } cvVoIPPeerCfgUDPChecksumEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether the outgoing voice related UDP packet contains a valid checksum value. true - enable the checksum of outgoing voice UDP packets false - disable the checksum of outgoing voice UDP packets" DEFVAL { false } ::= { cvVoIPPeerCfgEntry 11 } cvVoIPPeerCfgIPPrecedence OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the value to be stored in the IP Precedence field of voice packets, with values ranging from 0 (normal precedence) through 7 (network control), allowing the managed system to set the importance of each voice packet for delivering them to the destination peer." REFERENCE "RFC 791: Section 3.1. Internet Header Format; Type of Service." DEFVAL { 0 } ::= { cvVoIPPeerCfgEntry 12 } cvVoIPPeerCfgTechPrefix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the technology prefix of the peer, The technology prefix and the called party address are passed in Admission Request (ARQ) to gatekeeper for the called party address resolution during call setup." REFERENCE "ITU-T H.225.0: Section 7.6 Common Message Elements." DEFVAL { "" } ::= { cvVoIPPeerCfgEntry 13 } cvVoIPPeerCfgDigitRelay OBJECT-TYPE SYNTAX BITS { rtpCisco(0), h245Signal(1), h245Alphanumeric(2), rtpNte(3), sipNotify(4), sipKpml(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the methods to transmit dial digits (DTMF or MF digits) via IP network. rtpCisco - Enable capability to transmit dial digits with Cisco proprietary RTP payload type. h245Signal - Enable capability to transmit dtmf digits across the H.245 channel, via the signal field of the UserInputIndication message h245Alphanumeric - Enable capability to transmit dtmf digit across the H.245 channel, via the string or alphanumeric fields of the UserInputIndication message rtpNte - Enable capability to transmit dial digits using Named Telephony Event per RFC 2833 section 3. sipNotify - Enable capability to transmit dtmf digits using unsolicited SIP NOTIFY messages. This mechanism is only available for SIP dialpeers. sipKpml - Enable capability to transmit dtmf digits using KPML over SIP SUBSCRIBE and NOTIFY messages. This mechanism is only available for SIP dialpeers. Modifying the value of cvVoIPPeerCfgSessionProtocol can reset the digit-relay method associated bits value in this object if the modified session protocol does not support these digit-relay methods." REFERENCE "[1] ITU H.245: Section 6. [2] RFC 2833 : Section 3." DEFVAL { { } } ::= { cvVoIPPeerCfgEntry 14 } cvVoIPPeerCfgCoderBytes OBJECT-TYPE SYNTAX Integer32 (0 | 10..240) UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the size of the voice payload sample to be produced by the coder specified in cvVoIPPeerCfgCoderRate. Each coder sample produces 10 bytes of voice payload. The specified value will be rounded down to the nearest valid size. A value of 0, specifies that the coder defined by cvVoIPPeerCfgCoderRate should produce its default payload size." DEFVAL { 0 } ::= { cvVoIPPeerCfgEntry 15 } cvVoIPPeerCfgFaxBytes OBJECT-TYPE SYNTAX Integer32 (0 | 10..255) UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the payload size to be produced by the coder when it is generating fax data. A value of 0, specifies that the coder specified in cvVoIPCfgPeerCoderRate should produce its default fax payload size." DEFVAL { 0 } ::= { cvVoIPPeerCfgEntry 16 } cvVoIPPeerCfgInBandSignaling OBJECT-TYPE SYNTAX CvcInBandSignaling MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of in-band signaling that will be used between the end points of the call. It is used by the router to determine how to interpret ABCD signaling bits sent as part of voice payload data." DEFVAL { cas } ::= { cvVoIPPeerCfgEntry 17 } cvVoIPPeerCfgMediaSetting OBJECT-TYPE SYNTAX INTEGER { flowThrough(1), flowAround(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies how the media is to be setup on an IP-IP Gateway. Two choices are valid: flow-through and flow-around. When in flow-through mode, which is the default setting, the IP-IP Gateway will terminate and then re-originate the media stream. When flow-around is configured the Gateway will not be involved with the media, since it will flow-around the Gateway and will be established directly between the endpoints." DEFVAL { flowThrough } ::= { cvVoIPPeerCfgEntry 23 } cvVoIPPeerCfgDesiredQoSVideo OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the user requested Quality of Service for the video portion of the call." DEFVAL { bestEffort } ::= { cvVoIPPeerCfgEntry 24 } cvVoIPPeerCfgMinAcceptableQoSVideo OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the minimally acceptable Quality of Service for the video portion of the call." DEFVAL { bestEffort } ::= { cvVoIPPeerCfgEntry 25 } cvVoIPPeerCfgRedirectip2ip OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Inbound VoIP calls that match an outbound VoIP dialpeer will be responded with a SIP redirect(for inbound SIP) or H.450.3 call-forward(for inbound H.323)." DEFVAL { false } ::= { cvVoIPPeerCfgEntry 26 } cvVoIPPeerCfgOctetAligned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If the object has a value true(1) octet align operation is used, and if the value is false(2), bandwidth efficient operation is used. This object is not instantiated when the object cvVoIPPeerCfgCoderRate is not equal to gsmAmrNb enum." DEFVAL { true } ::= { cvVoIPPeerCfgEntry 27 } cvVoIPPeerCfgBitRates OBJECT-TYPE SYNTAX CvAmrNbBitRateMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates modes of Bit rates. One or more upto four modes can be configured at the same time as bit rates can be changed dynamically for AMR-NB codec. This object is not instantiated when the object cvVoIPPeerCfgCoderRate is not equal to gsmAmrNb enum." DEFVAL { { } } ::= { cvVoIPPeerCfgEntry 28 } cvVoIPPeerCfgCRC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If the object has a value of true(1), frame CRC will be included in the payload and if the value is false(2), frame CRC will not be included in the payload. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object cvVoIPPeerCfgCoderRate is not equal to gsmAmrNb enum." DEFVAL { false } ::= { cvVoIPPeerCfgEntry 29 } cvVoIPPeerCfgCoderMode OBJECT-TYPE SYNTAX CvIlbcFrameMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the iLBC codec mode to be used. The value of this object is valid only if cvVoIPPeerCfgCoderRate is equal to 'iLBC'." REFERENCE "RFC 3952: Section 4.2 - MIME Registration of iLBC" DEFVAL { frameMode20 } ::= { cvVoIPPeerCfgEntry 30 } cvVoIPPeerCfgCodingMode OBJECT-TYPE SYNTAX INTEGER { adaptive(1), independent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the coding mode to be used. The object is instantiated only if cvVoIPPeerCfgCoderRate is 'iSAC'. Following coding modes are supported: adaptive (1) - adaptive mode where iSAC performs bandwidth estimation and adapts to the available channel bandwidth. independent (2) - independent mode in which no bandwidth estimation is performed." DEFVAL { independent } ::= { cvVoIPPeerCfgEntry 31 } cvVoIPPeerCfgBitRate OBJECT-TYPE SYNTAX Unsigned32 (10000..32000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the target bit rate. The object is instantiated only if cvVoIPPeerCfgCoderRate is 'iSAC'." DEFVAL { 32000 } ::= { cvVoIPPeerCfgEntry 32 } cvVoIPPeerCfgFrameSize OBJECT-TYPE SYNTAX INTEGER { frameSize30(1), frameSize60(2), frameSize30fixed(3), frameSize60fixed(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the frame size used. The object is instantiated only if cvVoIPPeerCfgCoderRate is 'iSAC'. The frame size can be 30 ms or 60 ms, and it can be fixed for all packets or vary depending on the configuration and bandwidth estimation. Thus it can have the following values: frameSize30 - initial frame size of 30 ms frameSize60 - initial frame size of 60 ms frameSize30fixed - fixed frame size 30 ms frameSize60fixed - fixed frame size 60 ms" DEFVAL { frameSize30 } ::= { cvVoIPPeerCfgEntry 33 } cvVoIPPeerCfgDSCPPolicyNotificationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether cvdcPolicyViolationNotification traps should be generated for the call that is associated with this peer for RPH to DSCP mapping and policing feature." DEFVAL { false } ::= { cvVoIPPeerCfgEntry 34 } cvVoIPPeerCfgMediaPolicyNotificationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether cvdcPolicyViolationNotification traps should be generated for the call that is associated with this peer for Media policing feature.." DEFVAL { false } ::= { cvVoIPPeerCfgEntry 35 } -- Voice specific common Peer Configuration Table cvPeerCommonCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CvPeerCommonCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the Voice specific peer common configuration information that is required to accept voice calls or to which it will place them or process the incoming calls." ::= { cvPeer 4 } cvPeerCommonCfgEntry OBJECT-TYPE SYNTAX CvPeerCommonCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single Voice specific Peer. One entry per voice related encapsulation. The entry is created when a voice related encapsulation ifEntry is created. This entry is deleted when its associated ifEntry is deleted." INDEX { ifIndex } ::= { cvPeerCommonCfgTable 1 } CvPeerCommonCfgEntry ::= SEQUENCE { cvPeerCommonCfgIncomingDnisDigits DisplayString, cvPeerCommonCfgMaxConnections Integer32, cvPeerCommonCfgApplicationName DisplayString, cvPeerCommonCfgPreference Integer32, cvPeerCommonCfgHuntStop TruthValue, cvPeerCommonCfgDnisMappingName DnisMapname, cvPeerCommonCfgSourceCarrierId SnmpAdminString, cvPeerCommonCfgTargetCarrierId SnmpAdminString, cvPeerCommonCfgSourceTrunkGrpLabel SnmpAdminString, cvPeerCommonCfgTargetTrunkGrpLabel SnmpAdminString } cvPeerCommonCfgIncomingDnisDigits OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the prefix of the incoming Dialed Number Identification Service (DNIS) digits for the peer. The DNIS digits prefix is used to match with the incoming DNIS number for incoming call discrimination. If the digits in this object are matched with incoming DNIS number, the associated dialCtlPeerCfgInfoType in RFC 2128 will be used as a call discriminator for differentiating speech, data, fax, video or modem calls." DEFVAL { "" } ::= { cvPeerCommonCfgEntry 1 } cvPeerCommonCfgMaxConnections OBJECT-TYPE SYNTAX Integer32 (-1 | 1..2147483647) UNITS "connections" MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the maximum allowed connection to/from the peer. A value of -1 disables the limit of maximum connections." DEFVAL { -1 } ::= { cvPeerCommonCfgEntry 2 } cvPeerCommonCfgApplicationName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the application to handle the incoming call after the peer is selected. If no application name is specified, then the default session application will take care of the incoming call." DEFVAL { "" } ::= { cvPeerCommonCfgEntry 3 } cvPeerCommonCfgPreference OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the selection preference of a peer when multiple peers are matched to the selection criteria. The value of 0 has the lowest preference for peer selection." DEFVAL { 0 } ::= { cvPeerCommonCfgEntry 4 } cvPeerCommonCfgHuntStop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether dialpeer hunting should stop when this peer is reached." DEFVAL { false } ::= { cvPeerCommonCfgEntry 5 } cvPeerCommonCfgDnisMappingName OBJECT-TYPE SYNTAX DnisMapname MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies a Dialer Number Identification Service (DNIS) map name for the Voice specific peer entry specified in this row. A DNIS is a called party number and they can be grouped and identified by DNIS map." DEFVAL { "" } ::= { cvPeerCommonCfgEntry 6 } cvPeerCommonCfgSourceCarrierId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the Source Carrier Id for the peer. The Source Carrier Id is used to match with the Source Carrier Id of a call. If the Source Carrier Id in this object is matched with the Source Carrier Id of a call, then the associated peer will be used to handle the call. Only alphanumeric characters, '-' and '_' are allowed in the string." DEFVAL { "" } ::= { cvPeerCommonCfgEntry 7 } cvPeerCommonCfgTargetCarrierId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the Target Carrier Id for the peer. The Target Carrier Id is used to match with the Target Carrier Id of a call. If the Target Carrier Id in this object is matched with the Target Carrier Id of a call, then the associated peer will be used to handle the call. Only alphanumeric characters, '-' and '_' are allowed in the string." DEFVAL { "" } ::= { cvPeerCommonCfgEntry 8 } cvPeerCommonCfgSourceTrunkGrpLabel OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the Source Trunk Group Label for the peer. The Source Trunk Group Label is used to match with the Source Trunk Group Label of a call. If the Source Trunk Group Label in this object is matched with the Source Trunk Group Label of a call, then the associated peer will be used to handle the call. Only alphanumeric characters, '-' and '_' are allowed in the string." DEFVAL { "" } ::= { cvPeerCommonCfgEntry 9 } cvPeerCommonCfgTargetTrunkGrpLabel OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the Target Trunk Group Label for the peer. The Target Trunk Group Label is used to match with the Target Trunk Group Label of a call. If the Target Trunk Group Label in this object is matched with the Target Trunk Group Label of a call, then the associated peer will be used to handle the call. Only alphanumeric characters, '-' and '_' are allowed in the string." DEFVAL { "" } ::= { cvPeerCommonCfgEntry 10 } -- -- ********************************************************************* -- Voice Dial Control Gateway Call Active Group -- ********************************************************************* -- -- For an end-to-end Gateway call, it normally has two or more call leg -- entries appear in the call active table after a successful end-to-end -- Gateway call establishment. The unique global call identifier in -- each call leg is used to identify a specific end-to-end call. -- If the call leg entries in call active table contain the same -- global call identifier, they belong to the same gateway call. -- -- -- Voice over Telephony Call Active Table cvCallActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the voice extension to the call active table of IETF Dial Control MIB. It contains voice encapsulation call leg information that is derived from the statistics of lower layer telephony interface." ::= { cvGatewayCallActive 1 } cvCallActiveEntry OBJECT-TYPE SYNTAX CvCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single voice encapsulation call leg. The call leg entry is identified by using the same index objects that are used by Call Active table of IETF Dial Control MIB to identify the call. An entry of this table is created when its associated call active entry in the IETF Dial Control MIB is created and call active entry contains the call establishment to a voice over telephony network peer. The entry is deleted when its associated call active entry in the IETF Dial Control MIB is deleted." INDEX { callActiveSetupTime, callActiveIndex } ::= { cvCallActiveTable 1 } CvCallActiveEntry ::= SEQUENCE { cvCallActiveConnectionId CvcGUid, cvCallActiveTxDuration AbsoluteCounter32, cvCallActiveVoiceTxDuration AbsoluteCounter32, cvCallActiveFaxTxDuration AbsoluteCounter32, cvCallActiveCoderTypeRate CvcCoderTypeRate, cvCallActiveNoiseLevel Integer32, cvCallActiveACOMLevel Integer32, cvCallActiveOutSignalLevel Integer32, cvCallActiveInSignalLevel Integer32, cvCallActiveERLLevel Integer32, cvCallActiveSessionTarget DisplayString, cvCallActiveImgPageCount AbsoluteCounter32, cvCallActiveCallingName SnmpAdminString, cvCallActiveCallerIDBlock TruthValue, cvCallActiveEcanReflectorLocation Integer32, cvCallActiveAccountCode SnmpAdminString, cvCallActiveERLLevelRev1 Integer32, cvCallActiveCallId Unsigned32 } cvCallActiveConnectionId OBJECT-TYPE SYNTAX CvcGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global connection identifier for the active telephony leg of the call." ::= { cvCallActiveEntry 1 } cvCallActiveTxDuration OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of Transmit path open from this peer to the voice gateway for the call leg. This counter object will lock at the maximum value which is approximately two days." ::= { cvCallActiveEntry 2 } cvCallActiveVoiceTxDuration OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice transmitted from this peer to voice gateway for this call leg. The Voice Utilization Rate can be obtained by dividing this by cvCallActiveTXDuration object. This counter object will lock at the maximum value which is approximately two days." ::= { cvCallActiveEntry 3 } cvCallActiveFaxTxDuration OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of fax transmitted from this peer to voice gateway for this call leg. The FAX Utilization Rate can be obtained by dividing this by cvCallActiveTXDuration object. This counter object will lock at the maximum value which is approximately two days." ::= { cvCallActiveEntry 4 } cvCallActiveCoderTypeRate OBJECT-TYPE SYNTAX CvcCoderTypeRate MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated coder rate. It specifies the transmit rate of voice/fax compression to its associated call leg for the call." ::= { cvCallActiveEntry 5 } cvCallActiveNoiseLevel OBJECT-TYPE SYNTAX Integer32 (-128..8) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The object contains the active noise level for the call leg." ::= { cvCallActiveEntry 6 } cvCallActiveACOMLevel OBJECT-TYPE SYNTAX Integer32 (-1..127) UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The object contains the sum of Echo Return Loss (ERL), cancellation loss (Echo Return Loss Enhancement) and nonlinear processing loss for the call leg. The value -1 indicates the level can not be determined or level detection is disabled." ::= { cvCallActiveEntry 7 } cvCallActiveOutSignalLevel OBJECT-TYPE SYNTAX Integer32 (-128..8) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The object contains the active output signal level to telephony interface that is used by the call leg." ::= { cvCallActiveEntry 8 } cvCallActiveInSignalLevel OBJECT-TYPE SYNTAX Integer32 (-128..8) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The object contains the active input signal level from telephony interface that is used by the call leg." ::= { cvCallActiveEntry 9 } cvCallActiveERLLevel OBJECT-TYPE SYNTAX Integer32 (-1..45) UNITS "dB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The object contains the current Echo Return Loss (ERL) level for the call leg. The value -1 indicates the level can not be determined or level detection is disabled." ::= { cvCallActiveEntry 10 } cvCallActiveSessionTarget OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the session target of the peer that is used for the call leg. This object is set with the information in the call associated cvVoicePeerCfgSessionTarget object when the call is connected." ::= { cvCallActiveEntry 11 } cvCallActiveImgPageCount OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "pages" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FAX related image pages are received or transmitted via the peer for the call leg." ::= { cvCallActiveEntry 12 } cvCallActiveCallingName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The calling party name of the call. If the name is not available, then it will have a length of zero." ::= { cvCallActiveEntry 13 } cvCallActiveCallerIDBlock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates whether or not the caller ID feature is blocked for this call." ::= { cvCallActiveEntry 14 } cvCallActiveEcanReflectorLocation OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The location in milliseconds of the largest amplitude reflector detected by the echo canceller for this call. The value 0 indicates there is no reflector or the information is not available." ::= { cvCallActiveEntry 15 } cvCallActiveAccountCode OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the account code input to the call. It could be used for call screen or by down stream server for billing purpose. The value of empty string indicates no account code input." DEFVAL { "" } ::= { cvCallActiveEntry 16 } cvCallActiveERLLevelRev1 OBJECT-TYPE SYNTAX Integer32 (-1..200) UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The object contains the current Echo Return Loss (ERL) level for the call leg. The value -1 indicates the level can not be determined or level detection is disabled." ::= { cvCallActiveEntry 17 } cvCallActiveCallId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the call identifier for the active telephony leg of the call." ::= { cvCallActiveEntry 18 } -- Voice over IP Call Active Table cvVoIPCallActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF CvVoIPCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the VoIP extension to the call active table of IETF Dial Control MIB. It contains VoIP call leg information about specific VoIP call destination and the selected QoS for the call leg." ::= { cvGatewayCallActive 2 } cvVoIPCallActiveEntry OBJECT-TYPE SYNTAX CvVoIPCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single VoIP call leg. The call leg entry is identified by using the same index objects that are used by Call Active table of IETF Dial Control MIB to identify the call. An entry of this table is created when its associated call active entry in the IETF Dial Control MIB is created and the call active entry contains information for the call establishment to the peer on the IP backbone via a voice over IP peer. The entry is deleted when its associated call active entry in the IETF Dial Control MIB is deleted." INDEX { callActiveSetupTime, callActiveIndex } ::= { cvVoIPCallActiveTable 1 } CvVoIPCallActiveEntry ::= SEQUENCE { cvVoIPCallActiveConnectionId CvcGUid, cvVoIPCallActiveRemoteIPAddress IpAddress, cvVoIPCallActiveRemoteUDPPort Integer32, cvVoIPCallActiveRoundTripDelay Gauge32, cvVoIPCallActiveSelectedQoS QosService, cvVoIPCallActiveSessionProtocol CvSessionProtocol, cvVoIPCallActiveSessionTarget DisplayString, cvVoIPCallActiveOnTimeRvPlayout AbsoluteCounter32, cvVoIPCallActiveGapFillWithSilence AbsoluteCounter32, cvVoIPCallActiveGapFillWithPrediction AbsoluteCounter32, cvVoIPCallActiveGapFillWithInterpolation AbsoluteCounter32, cvVoIPCallActiveGapFillWithRedundancy AbsoluteCounter32, cvVoIPCallActiveHiWaterPlayoutDelay AbsoluteCounter32, cvVoIPCallActiveLoWaterPlayoutDelay Gauge32, cvVoIPCallActiveReceiveDelay Gauge32, cvVoIPCallActiveVADEnable TruthValue, cvVoIPCallActiveCoderTypeRate CvcCoderTypeRate, cvVoIPCallActiveLostPackets AbsoluteCounter32, cvVoIPCallActiveEarlyPackets AbsoluteCounter32, cvVoIPCallActiveLatePackets AbsoluteCounter32, cvVoIPCallActiveUsername SnmpAdminString, cvVoIPCallActiveProtocolCallId OCTET STRING, cvVoIPCallActiveRemSigIPAddrT InetAddressType, cvVoIPCallActiveRemSigIPAddr InetAddress, cvVoIPCallActiveRemSigPort Integer32, cvVoIPCallActiveRemMediaIPAddrT InetAddressType, cvVoIPCallActiveRemMediaIPAddr InetAddress, cvVoIPCallActiveRemMediaPort Integer32, cvVoIPCallActiveSRTPEnable TruthValue, cvVoIPCallActiveOctetAligned TruthValue, cvVoIPCallActiveBitRates CvAmrNbBitRateMode, cvVoIPCallActiveModeChgPeriod Integer32, cvVoIPCallActiveModeChgNeighbor TruthValue, cvVoIPCallActiveMaxPtime Integer32, cvVoIPCallActiveCRC TruthValue, cvVoIPCallActiveRobustSorting TruthValue, cvVoIPCallActiveEncap CvAmrNbRtpEncap, cvVoIPCallActiveInterleaving Integer32, cvVoIPCallActivePtime Integer32, cvVoIPCallActiveChannels Integer32, cvVoIPCallActiveCoderMode CvIlbcFrameMode, cvVoIPCallActiveCallId Unsigned32, cvVoIPCallActiveCallReferenceId CvcCallReferenceIdOrZero, ccVoIPCallActivePolicyName DisplayString, cvVoIPCallActiveReversedDirectionPeerAddress DisplayString, cvVoIPCallActiveSessionId Unsigned32 } cvVoIPCallActiveConnectionId OBJECT-TYPE SYNTAX CvcGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global connection identifier for the active VoIP leg of the call." ::= { cvVoIPCallActiveEntry 1 } cvVoIPCallActiveRemoteIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Remote system IP address for the VoIP call." ::= { cvVoIPCallActiveEntry 2 } cvVoIPCallActiveRemoteUDPPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Remote system UDP listener port to which to transmit voice packets." ::= { cvVoIPCallActiveEntry 3 } cvVoIPCallActiveRoundTripDelay OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The voice packet round trip delay between local and the remote system on the IP backbone during the call." ::= { cvVoIPCallActiveEntry 4 } cvVoIPCallActiveSelectedQoS OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-only STATUS current DESCRIPTION "The selected RSVP QoS for the voice call." ::= { cvVoIPCallActiveEntry 5 } cvVoIPCallActiveSessionProtocol OBJECT-TYPE SYNTAX CvSessionProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the session protocol to be used for Internet call between local and remote router via IP backbone." ::= { cvVoIPCallActiveEntry 6 } cvVoIPCallActiveSessionTarget OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the session target of the peer that is used for the call. This object is set with the information in the call associated cvVoIPPeerCfgSessionTarget object when the voice over IP call is connected." ::= { cvVoIPCallActiveEntry 7 } cvVoIPCallActiveOnTimeRvPlayout OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice playout from data received on time for this call. This plus the durations for the GapFills in the following entries gives the Total Voice Playout Duration for Active Voice. This does not include duration for which no data was sent by the Transmit end as voice signal, e.g., silence suppression and fax signal. The On Time Playout Rate can be computed by dividing this entry by the Total Voice Playout Duration. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallActiveEntry 8 } cvVoIPCallActiveGapFillWithSilence OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice signal replaced with signal played out during silence due to voice data not received on time (or lost) from voice gateway this call. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallActiveEntry 9 } cvVoIPCallActiveGapFillWithPrediction OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice signal played out with signal synthesized from parameters or samples of data preceding in time due to voice data not received on time (or lost) from voice gateway for this call. An example of such playout is frame-erasure or frame-concealment strategies in G.729 and G.723.1 compression algorithms. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallActiveEntry 10 } cvVoIPCallActiveGapFillWithInterpolation OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice signal played out with signal synthesized from parameters or samples of data preceding and following in time due to voice data not received on time (or lost) from voice gateway for this call. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallActiveEntry 11 } cvVoIPCallActiveGapFillWithRedundancy OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice signal played out with signal synthesized from redundancy parameters available due to voice data not received on time (or lost) from voice gateway for this call. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallActiveEntry 12 } cvVoIPCallActiveHiWaterPlayoutDelay OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The high water mark Voice Playout FIFO Delay during the voice call. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallActiveEntry 13 } cvVoIPCallActiveLoWaterPlayoutDelay OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The low water mark Voice Playout FIFO Delay during the voice call." ::= { cvVoIPCallActiveEntry 14 } cvVoIPCallActiveReceiveDelay OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average Playout FIFO Delay plus the decoder delay during the voice call." ::= { cvVoIPCallActiveEntry 15 } cvVoIPCallActiveVADEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The object indicates whether or not the VAD (Voice Activity Detection) was enabled for the voice call." ::= { cvVoIPCallActiveEntry 16 } cvVoIPCallActiveCoderTypeRate OBJECT-TYPE SYNTAX CvcCoderTypeRate MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The negotiated coder rate. It specifies the transmit rate of voice/fax compression to its associated call leg for the call. This rate is different from the configuration rate because of rate negotiation during the call." ::= { cvVoIPCallActiveEntry 17 } cvVoIPCallActiveLostPackets OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of lost voice packets during the call." ::= { cvVoIPCallActiveEntry 18 } cvVoIPCallActiveEarlyPackets OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received voice packets that arrived too early to store in jitter buffer during the call." ::= { cvVoIPCallActiveEntry 19 } cvVoIPCallActiveLatePackets OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call." ::= { cvVoIPCallActiveEntry 20 } cvVoIPCallActiveUsername OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The textual identifier of the calling party (user) of the call. If the username is not available, then the value of this object will have a length of zero." ::= { cvVoIPCallActiveEntry 21 } cvVoIPCallActiveProtocolCallId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol-specific call identifier for the VoIP call." ::= { cvVoIPCallActiveEntry 22 } cvVoIPCallActiveRemSigIPAddrT OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of address contained in the associated instance of cvVoIPCallActiveRemSigIPAddr." ::= { cvVoIPCallActiveEntry 23 } cvVoIPCallActiveRemSigIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote signalling IP address for the VoIP call." ::= { cvVoIPCallActiveEntry 24 } cvVoIPCallActiveRemSigPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote signalling listener port to which to transmit voice packets." ::= { cvVoIPCallActiveEntry 25 } cvVoIPCallActiveRemMediaIPAddrT OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of address contained in the associated instance of cvVoIPCallActiveRemMediaIPAddr." ::= { cvVoIPCallActiveEntry 26 } cvVoIPCallActiveRemMediaIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote media end point IP address for the VoIP call." ::= { cvVoIPCallActiveEntry 27 } cvVoIPCallActiveRemMediaPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote media end point listener port to which to transmit voice packets." ::= { cvVoIPCallActiveEntry 28 } cvVoIPCallActiveSRTPEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates whether or not the SRTP (Secured RTP) was enabled for the voice call." ::= { cvVoIPCallActiveEntry 29 } cvVoIPCallActiveOctetAligned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If the object has a value true(1) octet align operation is used, and if the value is false(2), bandwidth efficient operation is used. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 30 } cvVoIPCallActiveBitRates OBJECT-TYPE SYNTAX CvAmrNbBitRateMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates modes of Bit rates. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 31 } cvVoIPCallActiveModeChgPeriod OBJECT-TYPE SYNTAX Integer32 (1..100) UNITS "frame-blocks" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the interval (N frame-blocks) at which codec mode changes are allowed. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 32 } cvVoIPCallActiveModeChgNeighbor OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If the object has a value of true(1), mode changes will be made to only neighboring modes set to cvVoIPCallActiveBitRates object. If the value is false(2), mode changes will be allowed to any modes set to cvVoIPCallActiveBitRates object. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 33 } cvVoIPCallActiveMaxPtime OBJECT-TYPE SYNTAX Integer32 (20..100) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the maximum amount of media that can be encapsulated in a payload. Supported value is 20 msec. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 34 } cvVoIPCallActiveCRC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If the object has a value of true(1), frame CRC will be included in the payload and if the value is false(2), frame CRC will not be included in the payload. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 35 } cvVoIPCallActiveRobustSorting OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If the object has a value of true(1), payload employs robust sorting and if the value is false(2), payload does not employ robust sorting. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 36 } cvVoIPCallActiveEncap OBJECT-TYPE SYNTAX CvAmrNbRtpEncap MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the RTP encapsulation type. Supported RTP encapsulation type is RFC3267. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 37 } cvVoIPCallActiveInterleaving OBJECT-TYPE SYNTAX Integer32 (1..50) UNITS "frame-blocks" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the maximum number of frame-blocks allowed in an interleaving group. It indicates that frame-block level interleaving will be used for that session. If this object is not set, interleaving is not used. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 38 } cvVoIPCallActivePtime OBJECT-TYPE SYNTAX Integer32 (20..100) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the length of the time in milliseconds represented by the media of the packet. Supported value is 20 milliseconds. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 39 } cvVoIPCallActiveChannels OBJECT-TYPE SYNTAX Integer32 (1..6) UNITS "channels" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the number of audio channels. Supported value is 1. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallActiveEntry 40 } cvVoIPCallActiveCoderMode OBJECT-TYPE SYNTAX CvIlbcFrameMode UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the iLBC codec mode. The value of this object is valid only if cvVoIPCallActiveCoderTypeRate is equal to 'iLBC'." REFERENCE "RFC 3952: Section 5, for codec negotiation for iLBC mode." ::= { cvVoIPCallActiveEntry 41 } cvVoIPCallActiveCallId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the call identifier for the active VoIP leg of the call." ::= { cvVoIPCallActiveEntry 42 } cvVoIPCallActiveCallReferenceId OBJECT-TYPE SYNTAX CvcCallReferenceIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call may or may not have a valid call reference ID (i.e. value greater than zero), but in both cases, there will not be a video call entry associated with it. For a video call, the video-specific information is stored in a call entry in cVideoSessionActive of CISCO-VIDEO-SESSION-MIB, in which the call reference ID is also identified." ::= { cvVoIPCallActiveEntry 43 } ccVoIPCallActivePolicyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the policy name. It could be media policy, DSCP policy etc." ::= { cvVoIPCallActiveEntry 44 } cvVoIPCallActiveReversedDirectionPeerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object store the reversed direction peer address If the address is not available, then it will have a length of zero. If the call is ingress then it contains called number and if the call is egress then it contains calling number." ::= { cvVoIPCallActiveEntry 45 } cvVoIPCallActiveSessionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the active session ID assigned by the call manager to identify call legs that belong to the same call session." ::= { cvVoIPCallActiveEntry 46 } cvCallActiveDS0s OBJECT-TYPE SYNTAX Gauge32 UNITS "interfaces" MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of DS0 interfaces used for the active calls." ::= { cvGatewayCallActive 3 } cvCallActiveDS0sHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "A high threshold used to determine when to generate the cvdcActiveDS0sHighNotification. This object represents the percentage of active DS0s in total number of DS0s." DEFVAL { 100 } ::= { cvGatewayCallActive 4 } cvCallActiveDS0sLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "A low threshold used to determine when to generate the cvdcActiveDS0sLowNotification notification. This object represents the percentage of active DS0s in total number of DS0s." DEFVAL { 0 } ::= { cvGatewayCallActive 5 } cvCallActiveDS0sHighNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether or not cvdcActiveDS0sHighNotification should be generated. 'true' : Indicates that the cvdcActiveDS0sHighNotification generation is enabled. 'false': Indicates that cvdcActiveDS0sHighNotification generation is disabled." DEFVAL { false } ::= { cvGatewayCallActive 6 } cvCallActiveDS0sLowNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether or not cvdcActiveDS0sLowNotification should be generated. 'true' : Indicates that the cvdcActiveDS0sLowNotification generation is enabled. 'false': Indicates that cvdcActiveDS0sLowNotification generation is disabled." DEFVAL { false } ::= { cvGatewayCallActive 7 } -- Call Volume cvCallVolume OBJECT IDENTIFIER ::= { cvGatewayCallActive 8 } cvCallVolConnTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallVolConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the number of active call connections for each call connection type in the voice gateway." ::= { cvCallVolume 1 } cvCallVolConnEntry OBJECT-TYPE SYNTAX CvCallVolConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cvCallVolConnTable indicates number of active calls for a call connection type in the voice gateway." INDEX { cvCallVolConnIndex } ::= { cvCallVolConnTable 1 } CvCallVolConnEntry ::= SEQUENCE { cvCallVolConnIndex CvCallConnectionType, cvCallVolConnActiveConnection Gauge32 } cvCallVolConnIndex OBJECT-TYPE SYNTAX CvCallConnectionType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents index to the cvCallVolConnTable." ::= { cvCallVolConnEntry 1 } cvCallVolConnActiveConnection OBJECT-TYPE SYNTAX Gauge32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the total number of active calls for a connection type in the voice gateway." ::= { cvCallVolConnEntry 2 } cvCallVolConnTotalActiveConnections OBJECT-TYPE SYNTAX Gauge32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the total number of active call legs in the voice gateway." ::= { cvCallVolume 2 } cvCallVolConnMaxCallConnectionLicenese OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the licensed call capacity for a voice gateway. If the value is 0, no licensing is done and the gateway can be accomodate as many calls depending on its capability." ::= { cvCallVolume 3 } -- Calls per Dial peer cvCallVolPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallVolPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the information about the usage of dialpeers configured in a voice gateway." ::= { cvCallVolume 4 } cvCallVolPeerEntry OBJECT-TYPE SYNTAX CvCallVolPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a row in cvCallVolPeerTable and corresponds to the information about a dialpeer configured on the voice gateway." AUGMENTS { cvPeerCfgEntry } ::= { cvCallVolPeerTable 1 } CvCallVolPeerEntry ::= SEQUENCE { cvCallVolPeerIncomingCalls Gauge32, cvCallVolPeerOutgoingCalls Gauge32 } cvCallVolPeerIncomingCalls OBJECT-TYPE SYNTAX Gauge32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the total number of active calls that has selected the dialpeer as an incoming dialpeer." ::= { cvCallVolPeerEntry 1 } cvCallVolPeerOutgoingCalls OBJECT-TYPE SYNTAX Gauge32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the total number of active calls that has selected the dialpeer as an outgoing dialpeer." ::= { cvCallVolPeerEntry 2 } -- Calls per IP Interface cvCallVolIfTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallVolIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the information about the usage of an IP interface in a voice gateway for voice media calls. This table has a sparse-dependent relationship with ifTable. There exists an entry in this table, for each of the entries in ifTable where ifType is one of 'ethernetCsmacd' and 'softwareLoopback'." ::= { cvCallVolume 5 } cvCallVolIfEntry OBJECT-TYPE SYNTAX CvCallVolIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a row in cvCallVolIfTable and corresponds to the information about an IP interface in the voice gateway." INDEX { ifIndex } ::= { cvCallVolIfTable 1 } CvCallVolIfEntry ::= SEQUENCE { cvCallVolMediaIncomingCalls Gauge32, cvCallVolMediaOutgoingCalls Gauge32 } cvCallVolMediaIncomingCalls OBJECT-TYPE SYNTAX Gauge32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the total number of inbound active media calls through this IP interface." ::= { cvCallVolIfEntry 1 } cvCallVolMediaOutgoingCalls OBJECT-TYPE SYNTAX Gauge32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the total number of outbound active media calls through the IP interface." ::= { cvCallVolIfEntry 2 } -- call-rate. cvCallRateMonitor OBJECT IDENTIFIER ::= { cvGatewayCallActive 11 } cvCallRateMonitorEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the state of call-monitoring. A value of 'true' indicates that call-monitoring is enabled. A value of 'false' indicates that call-monitoring is disabled." DEFVAL { true } ::= { cvCallRateMonitor 1 } cvCallRateMonitorTime OBJECT-TYPE SYNTAX Unsigned32 (1..12) UNITS "five seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the interval for which the gateway monitors the call-rate." DEFVAL { 1 } ::= { cvCallRateMonitor 2 } cvCallRate OBJECT-TYPE SYNTAX Gauge32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the total number of calls handled by the gateway during the monitored time." ::= { cvCallRateMonitor 3 } cvCallRateHiWaterMark OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the high water mark for the number of calls handled by the gateway in an unit interval of cvCallRateMonitorTime, from the time the call-monitoring is enabled." ::= { cvCallRateMonitor 4 } -- ********************************************************************* -- Voice Dial Control Gateway Call History Group -- ********************************************************************* -- -- Voice over Telephony Call History Table cvCallHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the voice extension to the call history table of IETF Dial Control MIB. It contains voice encapsulation call leg information such as voice packet statistics, coder usage and end to end bandwidth of the call leg." ::= { cvGatewayCallHistory 1 } cvCallHistoryEntry OBJECT-TYPE SYNTAX CvCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single voice encapsulation call leg. The call leg entry is identified by using the same index objects that are used by Call Active table of IETF Dial Control MIB to identify the call. An entry of this table is created when its associated call history entry in the IETF Dial Control MIB is created and the call history entry contains the call establishment to a voice encapsulation peer. The entry is deleted when its associated call active entry in the IETF Dial Control MIB is deleted." INDEX { cCallHistoryIndex } ::= { cvCallHistoryTable 1 } CvCallHistoryEntry ::= SEQUENCE { cvCallHistoryConnectionId CvcGUid, cvCallHistoryTxDuration AbsoluteCounter32, cvCallHistoryVoiceTxDuration AbsoluteCounter32, cvCallHistoryFaxTxDuration AbsoluteCounter32, cvCallHistoryCoderTypeRate CvcCoderTypeRate, cvCallHistoryNoiseLevel Integer32, cvCallHistoryACOMLevel Integer32, cvCallHistorySessionTarget DisplayString, cvCallHistoryImgPageCount AbsoluteCounter32, cvCallHistoryCallingName SnmpAdminString, cvCallHistoryCallerIDBlock TruthValue, cvCallHistoryAccountCode SnmpAdminString, cvCallHistoryCallId Unsigned32 } cvCallHistoryConnectionId OBJECT-TYPE SYNTAX CvcGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global connection identifier for the telephony leg, which was assigned to the call." ::= { cvCallHistoryEntry 1 } cvCallHistoryTxDuration OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of Transmit path open from this peer to the voice gateway for the call leg. This counter object will lock at the maximum value which is approximately two days." ::= { cvCallHistoryEntry 2 } cvCallHistoryVoiceTxDuration OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration for this call leg. The Voice Utilization Rate can be obtained by dividing this by cvCallHistoryTXDuration object. This counter object will lock at the maximum value which is approximately two days." ::= { cvCallHistoryEntry 3 } cvCallHistoryFaxTxDuration OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of fax transmitted from this peer to voice gateway for this call leg. The FAX Utilization Rate can be obtained by dividing this by cvCallHistoryTXDuration object. This counter object will lock at the maximum value which is approximately two days." ::= { cvCallHistoryEntry 4 } cvCallHistoryCoderTypeRate OBJECT-TYPE SYNTAX CvcCoderTypeRate MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated coder rate. It specifies the transmit rate of voice/fax compression to its associated call leg for the call." ::= { cvCallHistoryEntry 5 } cvCallHistoryNoiseLevel OBJECT-TYPE SYNTAX Integer32 (-128..8) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The object contains the average noise level for the call leg." ::= { cvCallHistoryEntry 6 } cvCallHistoryACOMLevel OBJECT-TYPE SYNTAX Integer32 (-1..127) UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The object contains the average ACOM level for the call leg. The value -1 indicates the level can not be determined or level detection is disabled." ::= { cvCallHistoryEntry 7 } cvCallHistorySessionTarget OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the session target of the peer that is used for the call leg via telephony interface." ::= { cvCallHistoryEntry 8 } cvCallHistoryImgPageCount OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "pages" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FAX related image pages are received or transmitted via the peer for the call leg." ::= { cvCallHistoryEntry 9 } cvCallHistoryCallingName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The calling party name of the call. If the name is not available, then it will have a length of zero." ::= { cvCallHistoryEntry 10 } cvCallHistoryCallerIDBlock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates whether or not the caller ID feature is blocked for this call." ::= { cvCallHistoryEntry 11 } cvCallHistoryAccountCode OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the account code input to the call. It could be used by down stream billing server. The value of empty string indicates no account code input." DEFVAL { "" } ::= { cvCallHistoryEntry 12 } cvCallHistoryCallId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the call identifier for the telephony leg, which was assigned to the call." ::= { cvCallHistoryEntry 13 } -- Voice over IP Call History Table cvVoIPCallHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CvVoIPCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the VoIP extension to the call history table of IETF Dial Control MIB. It contains VoIP call leg information about specific VoIP call destination and the selected QoS for the call leg." ::= { cvGatewayCallHistory 2 } cvVoIPCallHistoryEntry OBJECT-TYPE SYNTAX CvVoIPCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single VoIP call leg. The call leg entry is identified by using the same index objects that are used by Call Active table of IETF Dial Control MIB to identify the call. An entry of this table is created when its associated call history entry in the IETF Dial Control MIB is created and the call history entry contains information for the call establishment to the peer on the IP backbone via a voice over IP peer. The entry is deleted when its associated call history entry in the IETF Dial Control MIB is deleted." INDEX { cCallHistoryIndex } ::= { cvVoIPCallHistoryTable 1 } CvVoIPCallHistoryEntry ::= SEQUENCE { cvVoIPCallHistoryConnectionId CvcGUid, cvVoIPCallHistoryRemoteIPAddress IpAddress, cvVoIPCallHistoryRemoteUDPPort Integer32, cvVoIPCallHistoryRoundTripDelay Gauge32, cvVoIPCallHistorySelectedQoS QosService, cvVoIPCallHistorySessionProtocol CvSessionProtocol, cvVoIPCallHistorySessionTarget DisplayString, cvVoIPCallHistoryOnTimeRvPlayout AbsoluteCounter32, cvVoIPCallHistoryGapFillWithSilence AbsoluteCounter32, cvVoIPCallHistoryGapFillWithPrediction AbsoluteCounter32, cvVoIPCallHistoryGapFillWithInterpolation AbsoluteCounter32, cvVoIPCallHistoryGapFillWithRedundancy AbsoluteCounter32, cvVoIPCallHistoryHiWaterPlayoutDelay AbsoluteCounter32, cvVoIPCallHistoryLoWaterPlayoutDelay Gauge32, cvVoIPCallHistoryReceiveDelay Gauge32, cvVoIPCallHistoryVADEnable TruthValue, cvVoIPCallHistoryCoderTypeRate CvcCoderTypeRate, cvVoIPCallHistoryIcpif Integer32, cvVoIPCallHistoryLostPackets AbsoluteCounter32, cvVoIPCallHistoryEarlyPackets AbsoluteCounter32, cvVoIPCallHistoryLatePackets AbsoluteCounter32, cvVoIPCallHistoryUsername SnmpAdminString, cvVoIPCallHistoryProtocolCallId OCTET STRING, cvVoIPCallHistoryRemSigIPAddrT InetAddressType, cvVoIPCallHistoryRemSigIPAddr InetAddress, cvVoIPCallHistoryRemSigPort Integer32, cvVoIPCallHistoryRemMediaIPAddrT InetAddressType, cvVoIPCallHistoryRemMediaIPAddr InetAddress, cvVoIPCallHistoryRemMediaPort Integer32, cvVoIPCallHistorySRTPEnable TruthValue, cvVoIPCallHistoryFallbackIcpif Integer32, cvVoIPCallHistoryFallbackLoss AbsoluteCounter32, cvVoIPCallHistoryFallbackDelay Gauge32, cvVoIPCallHistoryOctetAligned TruthValue, cvVoIPCallHistoryBitRates CvAmrNbBitRateMode, cvVoIPCallHistoryModeChgPeriod Integer32, cvVoIPCallHistoryModeChgNeighbor TruthValue, cvVoIPCallHistoryMaxPtime Integer32, cvVoIPCallHistoryCRC TruthValue, cvVoIPCallHistoryRobustSorting TruthValue, cvVoIPCallHistoryEncap CvAmrNbRtpEncap, cvVoIPCallHistoryInterleaving Integer32, cvVoIPCallHistoryPtime Integer32, cvVoIPCallHistoryChannels Integer32, cvVoIPCallHistoryCoderMode CvIlbcFrameMode, cvVoIPCallHistoryCallId Unsigned32, cvVoIPCallHistoryCallReferenceId CvcCallReferenceIdOrZero, cvVoIPCallHistorySessionId Unsigned32 } cvVoIPCallHistoryConnectionId OBJECT-TYPE SYNTAX CvcGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global connection identifier for the VoIP leg, which was assigned to the call." ::= { cvVoIPCallHistoryEntry 1 } cvVoIPCallHistoryRemoteIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Remote system IP address for the call." ::= { cvVoIPCallHistoryEntry 2 } cvVoIPCallHistoryRemoteUDPPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Remote system UDP listener port to which to transmit voice packets for the call." ::= { cvVoIPCallHistoryEntry 3 } cvVoIPCallHistoryRoundTripDelay OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The voice packet round trip delay between local and the remote system on the IP backbone during the call." ::= { cvVoIPCallHistoryEntry 4 } cvVoIPCallHistorySelectedQoS OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-only STATUS current DESCRIPTION "The selected RSVP QoS for the call." ::= { cvVoIPCallHistoryEntry 5 } cvVoIPCallHistorySessionProtocol OBJECT-TYPE SYNTAX CvSessionProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the session protocol to be used for Internet call between local and remote router via IP backbone." ::= { cvVoIPCallHistoryEntry 6 } cvVoIPCallHistorySessionTarget OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the session target of the peer that is used for the Voice over IP call." ::= { cvVoIPCallHistoryEntry 7 } cvVoIPCallHistoryOnTimeRvPlayout OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice playout from data received on time for this call. This plus the durations for the GapFills in the following entries gives the Total Voice Playout Duration for Active Voice. This does not include duration for which no data was sent by the Transmit end as voice signal, e.g., silence suppression and fax signal. The On Time Playout Rate can be computed by dividing this entry by the Total Voice Playout Duration. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallHistoryEntry 8 } cvVoIPCallHistoryGapFillWithSilence OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice signal replaced with signal played out during silence due to voice data not received on time (or lost) from voice gateway this call. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallHistoryEntry 9 } cvVoIPCallHistoryGapFillWithPrediction OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice signal played out with signal synthesized from parameters or samples of data preceding in time due to voice data not received on time (or lost) from voice gateway for this call. An example of such playout is frame-erasure or frame-concealment strategies in G.729 and G.723.1 compression algorithms. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallHistoryEntry 10 } cvVoIPCallHistoryGapFillWithInterpolation OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice signal played out with signal synthesized from parameters or samples of data preceding and following in time due to voice data not received on time (or lost) from voice gateway for this call. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallHistoryEntry 11 } cvVoIPCallHistoryGapFillWithRedundancy OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice signal played out with signal synthesized from redundancy parameters available due to voice data not received on time (or lost) from voice gateway for this call. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallHistoryEntry 12 } cvVoIPCallHistoryHiWaterPlayoutDelay OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The high water mark Voice Playout FIFO Delay during the voice call. This counter object will lock at the maximum value which is approximately two days." ::= { cvVoIPCallHistoryEntry 13 } cvVoIPCallHistoryLoWaterPlayoutDelay OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The low water mark Voice Playout FIFO Delay during the voice call." ::= { cvVoIPCallHistoryEntry 14 } cvVoIPCallHistoryReceiveDelay OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average Playout FIFO Delay plus the decoder delay during the voice call." ::= { cvVoIPCallHistoryEntry 15 } cvVoIPCallHistoryVADEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The object indicates whether or not the VAD (Voice Activity Detection) was enabled for the voice call." ::= { cvVoIPCallHistoryEntry 16 } cvVoIPCallHistoryCoderTypeRate OBJECT-TYPE SYNTAX CvcCoderTypeRate MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The negotiated coder rate. It specifies the transmit rate of voice/fax compression to its associated call leg for the call. This rate is different from the configuration rate because of rate negotiation during the call." ::= { cvVoIPCallHistoryEntry 17 } cvVoIPCallHistoryIcpif OBJECT-TYPE SYNTAX Integer32 (-1..55) UNITS "equipment impairment factor (eif)" MAX-ACCESS read-only STATUS current DESCRIPTION "The Calculated Planning Impairment Factor (Icpif) of the call that is associated to this call leg. The value in this object is computed by the following equation. Icpif of the call = Itotal (total impairment value) of the call - A (Expectation Factor) in the cvVoIPPeerCfgExpectFactor of the call leg associated peer. A value of -1 implies that Icpif was not calculated and is meaningless for this call." REFERENCE "[1] ITU G.113: Section 7.2 Impairment factors and the total impairment value. [2] ITU G.113: Sections 9 Considerations associated with the Calculated Planning Impairment Factor (Icpif)." ::= { cvVoIPCallHistoryEntry 18 } cvVoIPCallHistoryLostPackets OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of lost voice packets during the call." ::= { cvVoIPCallHistoryEntry 19 } cvVoIPCallHistoryEarlyPackets OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received voice packets that are arrived too early to store in jitter buffer during the call." ::= { cvVoIPCallHistoryEntry 20 } cvVoIPCallHistoryLatePackets OBJECT-TYPE SYNTAX AbsoluteCounter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received voice packets that are arrived too late to playout with CODEC (Coder/Decoder) during the call." ::= { cvVoIPCallHistoryEntry 21 } cvVoIPCallHistoryUsername OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The textual identifier of the calling party (user) of the call. If the username is not available, then the value of this object will have a length of zero." ::= { cvVoIPCallHistoryEntry 22 } cvVoIPCallHistoryProtocolCallId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol-specific call identifier for the VoIP call." ::= { cvVoIPCallHistoryEntry 23 } cvVoIPCallHistoryRemSigIPAddrT OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of address contained in the associated instance of cvVoIPCallHistoryRemSigIPAddr." ::= { cvVoIPCallHistoryEntry 24 } cvVoIPCallHistoryRemSigIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote signalling IP address for the VoIP call." ::= { cvVoIPCallHistoryEntry 25 } cvVoIPCallHistoryRemSigPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote signalling listener port to which to transmit voice packets." ::= { cvVoIPCallHistoryEntry 26 } cvVoIPCallHistoryRemMediaIPAddrT OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of address contained in the associated instance of cvVoIPCallHistoryRemMediaIPAddr." ::= { cvVoIPCallHistoryEntry 27 } cvVoIPCallHistoryRemMediaIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote media end point IP address for the VoIP call." ::= { cvVoIPCallHistoryEntry 28 } cvVoIPCallHistoryRemMediaPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote media end point listener port to which to transmit voice packets." ::= { cvVoIPCallHistoryEntry 29 } cvVoIPCallHistorySRTPEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates whether or not the SRTP (Secured RTP) was enabled for the voice call." ::= { cvVoIPCallHistoryEntry 30 } cvVoIPCallHistoryFallbackIcpif OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Calculated Planning Impairment Factor (Icpif) of the call that is associated to this call leg. The value in this object is computed by the following equation. Icpif of the fallback probe = Itotal (total impairment value) - configured fallback (Expectation Factor). A value of 0 implies that Icpif was not calculated and is meaningless for this attempt." ::= { cvVoIPCallHistoryEntry 31 } cvVoIPCallHistoryFallbackLoss OBJECT-TYPE SYNTAX AbsoluteCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "FallbackLoss is the percentage of loss packets based on the total packets sent." ::= { cvVoIPCallHistoryEntry 32 } cvVoIPCallHistoryFallbackDelay OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The FallbackDelay is calculated as follows - Take the sum of the round trips for all the probes, divide by the number of probes, and divide by two to get the one-way delay. Then add in jitter_in or jiter_out, which ever is higher." ::= { cvVoIPCallHistoryEntry 33 } cvVoIPCallHistoryOctetAligned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If the object has a value true(1) octet align operation is used, and if the value is false(2), bandwidth efficient operation is used. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 34 } cvVoIPCallHistoryBitRates OBJECT-TYPE SYNTAX CvAmrNbBitRateMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates modes of Bit rates. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 35 } cvVoIPCallHistoryModeChgPeriod OBJECT-TYPE SYNTAX Integer32 (1..100) UNITS "frame-blocks" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the interval (N frame-blocks) at which codec mode changes are allowed. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 36 } cvVoIPCallHistoryModeChgNeighbor OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If the object has a value of true(1), mode changes will be made to only neighboring modes set to cvVoIPCallHistoryBitRates object. If the value is false(2), mode changes will be allowed to any modes set to cvVoIPCallHistoryBitRates object. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 37 } cvVoIPCallHistoryMaxPtime OBJECT-TYPE SYNTAX Integer32 (20..100) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the maximum amount of media that can be encapsulated in a payload. Supported value is 20 msec. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 38 } cvVoIPCallHistoryCRC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If the object has a value of true(1), frame CRC will be included in the payload and if the value is false(2), frame CRC will not be included in the payload. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 39 } cvVoIPCallHistoryRobustSorting OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If the object has a value of true(1), payload employs robust sorting and if the value is false(2), payload does not employ robust sorting. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 40 } cvVoIPCallHistoryEncap OBJECT-TYPE SYNTAX CvAmrNbRtpEncap MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the RTP encapsulation type. Supported RTP encapsulation type is RFC3267. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 41 } cvVoIPCallHistoryInterleaving OBJECT-TYPE SYNTAX Integer32 (1..50) UNITS "frame-blocks" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the maximum number of frame-blocks allowed in an interleaving group. It indicates that frame-block level interleaving will be used for that session. If this object is not set, interleaving is not used. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 42 } cvVoIPCallHistoryPtime OBJECT-TYPE SYNTAX Integer32 (20..100) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the length of the time in milliseconds represented by the media of the packet. Supported value is 20 milliseconds. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 43 } cvVoIPCallHistoryChannels OBJECT-TYPE SYNTAX Integer32 (1..6) UNITS "channels" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the number of audio channels. Supported value is 1. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum." ::= { cvVoIPCallHistoryEntry 44 } cvVoIPCallHistoryCoderMode OBJECT-TYPE SYNTAX CvIlbcFrameMode UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the iLBC mode. The value of this object is valid only if cvVoIPCallHistoryCoderTypeRate is equal to 'iLBC'." REFERENCE "RFC 3952: Section 5, for codec negotiation for iLBC mode." ::= { cvVoIPCallHistoryEntry 45 } cvVoIPCallHistoryCallId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the call identifier for the VoIP leg, which was assigned to the call." ::= { cvVoIPCallHistoryEntry 46 } cvVoIPCallHistoryCallReferenceId OBJECT-TYPE SYNTAX CvcCallReferenceIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call may or may not have a valid call reference ID (i.e. value greater than zero), but in both cases, there will not be a video call entry associated with it. For a video call, the video-specific information is stored in a call entry in cVideoSessionActive of CISCO-VIDEO-SESSION-MIB, in which the call reference ID is also identified." ::= { cvVoIPCallHistoryEntry 47 } cvVoIPCallHistorySessionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the session ID assigned by the call manager to identify call legs that belong to the same call session. This session ID (history) represents a completed call session, whereas the active session ID (cvVoIPCallActiveSessionId) represents an ongoing session." ::= { cvVoIPCallHistoryEntry 48 } cvCallVolumeStatsHistory OBJECT IDENTIFIER ::= { cvGatewayCallHistory 3 } cvCallRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents voice call rate measurement in various interval lengths defined by the CvCallVolumeStatsIntvlType object. Each interval may contain one or more entries to allow for detailed measurement to be collected." ::= { cvCallVolumeStatsHistory 1 } cvCallRateStatsEntry OBJECT-TYPE SYNTAX CvCallRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a conceptual-row in cvCallRateStatsTable This entry is created at the system initialization and is updated at every epoch based on CvCallVolumeStatsIntvlType" INDEX { cvCallRateStatsIntvlDurUnits, cvCallRateStatsIntvlDur } ::= { cvCallRateStatsTable 1 } CvCallRateStatsEntry ::= SEQUENCE { cvCallRateStatsIntvlDurUnits CvCallVolumeStatsIntvlType, cvCallRateStatsIntvlDur Unsigned32, cvCallRateStatsMaxVal Unsigned32, cvCallRateStatsAvgVal Unsigned32 } cvCallRateStatsIntvlDurUnits OBJECT-TYPE SYNTAX CvCallVolumeStatsIntvlType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Object indexes in Call Rate Table to select one among three interval-tables. The different types in this table are represented by CvCallVolumeStatsIntvlType" ::= { cvCallRateStatsEntry 1 } cvCallRateStatsIntvlDur OBJECT-TYPE SYNTAX Unsigned32 (1..72) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an index that references to the different past periods in given in interval of call rate table. This range is 1-60 for Seconds and Minutes table wherein 1-72 for hours table." ::= { cvCallRateStatsEntry 2 } cvCallRateStatsMaxVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "calls-per-second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum calls per second that occured for the given period for the given interval." ::= { cvCallRateStatsEntry 3 } cvCallRateStatsAvgVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "calls-per-second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average calls per second that occured for the given period for the given interval." ::= { cvCallRateStatsEntry 4 } cvCallLegRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallLegRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "cvCallLegRateStatsTable table represents voice call leg rate measurement in various interval lengths defined by the CvCallVolumeStatsIntvlType object. Each interval may contain one or more entries to allow for detailed measurement to be collected." ::= { cvCallVolumeStatsHistory 2 } cvCallLegRateStatsEntry OBJECT-TYPE SYNTAX CvCallLegRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a conceptual-row in cvCallLegRateStatsTable This entry is created at the system initialization and is updated at every epoch based on CvCallVolumeStatsIntvlType" INDEX { cvCallLegRateStatsIntvlDurUnits, cvCallLegRateStatsIntvlDur } ::= { cvCallLegRateStatsTable 1 } CvCallLegRateStatsEntry ::= SEQUENCE { cvCallLegRateStatsIntvlDurUnits CvCallVolumeStatsIntvlType, cvCallLegRateStatsIntvlDur Unsigned32, cvCallLegRateStatsMaxVal Unsigned32, cvCallLegRateStatsAvgVal Unsigned32 } cvCallLegRateStatsIntvlDurUnits OBJECT-TYPE SYNTAX CvCallVolumeStatsIntvlType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Object indexes in Call Leg Rate Table to select one among three interval-tables. The different types in this table are represented by CvCallVolumeStatsIntvlType" ::= { cvCallLegRateStatsEntry 1 } cvCallLegRateStatsIntvlDur OBJECT-TYPE SYNTAX Unsigned32 (1..72) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an index that references to the different past periods in given in interval of call rate table. This range is 1-60 for Seconds and Minutes table wherein 1-72 for hours table." ::= { cvCallLegRateStatsEntry 2 } cvCallLegRateStatsMaxVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "call-legs per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum call-legs per second that occured for the given period for the given interval." ::= { cvCallLegRateStatsEntry 3 } cvCallLegRateStatsAvgVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "call-legs per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average call-legs per second that occured for the given period for the given interval." ::= { cvCallLegRateStatsEntry 4 } cvActiveCallStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CvActiveCallStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the active voice calls in various interval lengths defined by the CvCallVolumeStatsIntvlType object. Each interval may contain one or more entries to allow for detailed measurement to be collected." ::= { cvCallVolumeStatsHistory 3 } cvActiveCallStatsEntry OBJECT-TYPE SYNTAX CvActiveCallStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a conceptual-row in cvActiveCallStatsTable This entry is created at the system initialization and is updated at every epoch based on CvCallVolumeStatsIntvlType" INDEX { cvActiveCallStatsIntvlDurUnits, cvActiveCallStatsIntvlDur } ::= { cvActiveCallStatsTable 1 } CvActiveCallStatsEntry ::= SEQUENCE { cvActiveCallStatsIntvlDurUnits CvCallVolumeStatsIntvlType, cvActiveCallStatsIntvlDur Unsigned32, cvActiveCallStatsMaxVal Unsigned32, cvActiveCallStatsAvgVal Unsigned32 } cvActiveCallStatsIntvlDurUnits OBJECT-TYPE SYNTAX CvCallVolumeStatsIntvlType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Object indexes in Active Call Rate Table (con-current calls table) to select one among three interval-tables. The different types in this table are represented by CvCallVolumeStatsIntvlType" ::= { cvActiveCallStatsEntry 1 } cvActiveCallStatsIntvlDur OBJECT-TYPE SYNTAX Unsigned32 (1..72) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an index that references to the different past periods in given in interval of active call table. This range is 1-60 for Seconds and Minutes table wherein 1-72 for hours table." ::= { cvActiveCallStatsEntry 2 } cvActiveCallStatsMaxVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum number of active call that occured for the given period for the given interval." ::= { cvActiveCallStatsEntry 3 } cvActiveCallStatsAvgVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average number of active calls that occured for the given period for the given interval." ::= { cvActiveCallStatsEntry 4 } cvCallDurationStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallDurationStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the number of calls below a specific duration in various interval length defined by the CvCallVolumeStatsIntvlType object. The specific duration is configurable value of cvCallDurationStatsThreshold object. Each interval may contain one or more entries to allow for detailed measurement to be collected." ::= { cvCallVolumeStatsHistory 4 } cvCallDurationStatsEntry OBJECT-TYPE SYNTAX CvCallDurationStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a conceptual-row in cvCallDurationStatsTable This entry is created at the system initialization and is updated at every epoch based on CvCallVolumeStatsIntvlType" INDEX { cvCallDurationStatsIntvlDurUnits, cvCallDurationStatsIntvlDur } ::= { cvCallDurationStatsTable 1 } CvCallDurationStatsEntry ::= SEQUENCE { cvCallDurationStatsIntvlDurUnits CvCallVolumeStatsIntvlType, cvCallDurationStatsIntvlDur Unsigned32, cvCallDurationStatsMaxVal Unsigned32, cvCallDurationStatsAvgVal Unsigned32 } cvCallDurationStatsIntvlDurUnits OBJECT-TYPE SYNTAX CvCallVolumeStatsIntvlType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Object indexes in Call Duration Table to select one among three interval-tables. The different types in this table are represented by CvCallVolumeStatsIntvlType" ::= { cvCallDurationStatsEntry 1 } cvCallDurationStatsIntvlDur OBJECT-TYPE SYNTAX Unsigned32 (1..72) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an index that references to the different past periods in given in interval of call Duration table. This range is 1-60 for Seconds and Minutes table wherein 1-72 for hours table." ::= { cvCallDurationStatsEntry 2 } cvCallDurationStatsMaxVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum number of calls having a duration which is below the threshold for the given interval." ::= { cvCallDurationStatsEntry 3 } cvCallDurationStatsAvgVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average number of calls having a duration which is below the threshold for the given interval." ::= { cvCallDurationStatsEntry 4 } cvSipMsgRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CvSipMsgRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the SIP message rate measurement in various interval length defined by the CvCallVolumeStatsIntvlType object. Each interval may contain one or more entries to allow for detailed measurement to be collected" ::= { cvCallVolumeStatsHistory 5 } cvSipMsgRateStatsEntry OBJECT-TYPE SYNTAX CvSipMsgRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a conceptual-row in cvSipMsgRateStatsTable This entry is created at the system initialization and is updated at every epoch based on CvCallVolumeStatsIntvlType" INDEX { cvSipMsgRateStatsIntvlDurUnits, cvSipMsgRateStatsIntvlDur } ::= { cvSipMsgRateStatsTable 1 } CvSipMsgRateStatsEntry ::= SEQUENCE { cvSipMsgRateStatsIntvlDurUnits CvCallVolumeStatsIntvlType, cvSipMsgRateStatsIntvlDur Unsigned32, cvSipMsgRateStatsMaxVal Unsigned32, cvSipMsgRateStatsAvgVal Unsigned32 } cvSipMsgRateStatsIntvlDurUnits OBJECT-TYPE SYNTAX CvCallVolumeStatsIntvlType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Object indexes in SIP Message Rate Table to select one among three interval-tables. The different types in this table are represented by CvCallVolumeStatsIntvlType" ::= { cvSipMsgRateStatsEntry 1 } cvSipMsgRateStatsIntvlDur OBJECT-TYPE SYNTAX Unsigned32 (1..72) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an index that references to the different past periods in given in interval of SIP message rate table. This range is 1-60 for Seconds and Minutes table wherein 1-72 for hours table." ::= { cvSipMsgRateStatsEntry 2 } cvSipMsgRateStatsMaxVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "SIP messages per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum SIP messages per second that is received for the given interval." ::= { cvSipMsgRateStatsEntry 3 } cvSipMsgRateStatsAvgVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "SIP messages per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average SIP messages per second that is received for the given interval." ::= { cvSipMsgRateStatsEntry 4 } cvCallRateWMTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallRateWMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents high watermarks achieved by call rate in various interval length defined by CvCallVolumeWMIntvlType. Each interval may contain one or more entries to allow for detailed measurement to be collected" ::= { cvCallVolumeStatsHistory 6 } cvCallRateWMEntry OBJECT-TYPE SYNTAX CvCallRateWMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a conceptual-row in cvCallRateWMTable This entry is created at the system initialization and is updated whenever a) This entry is obsolete OR b) A new/higher entry is available. These entries are reinitialised/added/deleted if cvCallVolumeWMTableSize is changed" INDEX { cvCallRateWMIntvlDurUnits, cvCallRateWMIndex } ::= { cvCallRateWMTable 1 } CvCallRateWMEntry ::= SEQUENCE { cvCallRateWMIntvlDurUnits CvCallVolumeWMIntvlType, cvCallRateWMIndex Unsigned32, cvCallRateWMValue Unsigned32, cvCallRateWMts DateAndTime } cvCallRateWMIntvlDurUnits OBJECT-TYPE SYNTAX CvCallVolumeWMIntvlType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Object indexes in call rate Water mark Table to select one among four interval-tables. The different types in this table are represented by CvCallVolumeWMIntvlType" ::= { cvCallRateWMEntry 1 } cvCallRateWMIndex OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an index that references to different peaks in past period in call rate watermark table. The number of watermarks entries stored for each table are based on cvCallVolumeWMTableSize" ::= { cvCallRateWMEntry 2 } cvCallRateWMValue OBJECT-TYPE SYNTAX Unsigned32 UNITS "calls per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates high watermark value achieved by the calls per second for the given interval" ::= { cvCallRateWMEntry 3 } cvCallRateWMts OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates date and Time when the high watermark is achieved for calls per second for the given interval" ::= { cvCallRateWMEntry 4 } cvCallLegRateWMTable OBJECT-TYPE SYNTAX SEQUENCE OF CvCallLegRateWMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "cvCallLegRateWMTable table represents high watermarks achieved by call-leg rate in various interval length defined by CvCallVolumeWMIntvlType. Each interval may contain one or more entries to allow for detailed measurement to be collected" ::= { cvCallVolumeStatsHistory 7 } cvCallLegRateWMEntry OBJECT-TYPE SYNTAX CvCallLegRateWMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a conceptual-row in cvCallLegRateWMTable This entry is created at the system initialization and is updated whenever a) This entry is obsolete OR b) A new/higher entry is available. These entries are reinitialised/added/deleted if cvCallVolumeWMTableSize is changed" INDEX { cvCallLegRateWMIntvlDurUnits, cvCallLegRateWMIndex } ::= { cvCallLegRateWMTable 1 } CvCallLegRateWMEntry ::= SEQUENCE { cvCallLegRateWMIntvlDurUnits CvCallVolumeWMIntvlType, cvCallLegRateWMIndex Unsigned32, cvCallLegRateWMValue Unsigned32, cvCallLegRateWMts DateAndTime } cvCallLegRateWMIntvlDurUnits OBJECT-TYPE SYNTAX CvCallVolumeWMIntvlType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Object indexes in call leg rate Water mark Table to select one among four interval-tables. The different types in this table are represented by CvCallVolumeWMIntvlType" ::= { cvCallLegRateWMEntry 1 } cvCallLegRateWMIndex OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an index that references to different peaks in past period in call leg rate watermark table. The number of watermarks entries stored for each table are based on cvCallVolumeWMTableSize" ::= { cvCallLegRateWMEntry 2 } cvCallLegRateWMValue OBJECT-TYPE SYNTAX Unsigned32 UNITS "call legs per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates high watermark value achieved by the call legs per second for the given interval" ::= { cvCallLegRateWMEntry 3 } cvCallLegRateWMts OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates date and time when the high watermark is achieved for call-legs per second for the given interval" ::= { cvCallLegRateWMEntry 4 } cvActiveCallWMTable OBJECT-TYPE SYNTAX SEQUENCE OF CvActiveCallWMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents high watermarks achieved by active calls in various interval length defined by CvCallVolumeWMIntvlType. Each interval may contain one or more entries to allow for detailed measurement to be collected." ::= { cvCallVolumeStatsHistory 8 } cvActiveCallWMEntry OBJECT-TYPE SYNTAX CvActiveCallWMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a conceptual-row in cvActiveCallWMTable This entry is created at the system initialization and is updated whenever a) This entry is obsolete OR b) A new/higher entry is available. These entries are reinitialised/added/deleted if cvCallVolumeWMTableSize is changed" INDEX { cvActiveCallWMIntvlDurUnits, cvActiveCallWMIndex } ::= { cvActiveCallWMTable 1 } CvActiveCallWMEntry ::= SEQUENCE { cvActiveCallWMIntvlDurUnits CvCallVolumeWMIntvlType, cvActiveCallWMIndex Unsigned32, cvActiveCallWMValue Unsigned32, cvActiveCallWMts DateAndTime } cvActiveCallWMIntvlDurUnits OBJECT-TYPE SYNTAX CvCallVolumeWMIntvlType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Object indexes in active call Water mark Table to select one among four interval-tables. The different types in this table are represented by CvCallVolumeWMIntvlType" ::= { cvActiveCallWMEntry 1 } cvActiveCallWMIndex OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an index that references to different peaks in past period in acive call watermark table. The number of watermarks entries stored for each table are based on cvCallVolumeWMTableSize" ::= { cvActiveCallWMEntry 2 } cvActiveCallWMValue OBJECT-TYPE SYNTAX Unsigned32 UNITS "calls" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates high watermark value achieved by the active calls for the given interval" ::= { cvActiveCallWMEntry 3 } cvActiveCallWMts OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates date and time when the high watermark is achieved for active calls for the given interval" ::= { cvActiveCallWMEntry 4 } cvSipMsgRateWMTable OBJECT-TYPE SYNTAX SEQUENCE OF CvSipMsgRateWMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents of high watermarks achieved by SIP message rate in various interval length defined by CvCallVolumeWMIntvlType. Each interval may contain one or more entries to allow for detailed measurement to be collected" ::= { cvCallVolumeStatsHistory 9 } cvSipMsgRateWMEntry OBJECT-TYPE SYNTAX CvSipMsgRateWMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a conceptual-row in cvSipMsgRateWMTable. This entry is created at the system initialization and is updated whenever a) This entry is obsolete OR b) A new/higher entry is available. These entries are reinitialised/added/deleted if cvCallVolumeWMTableSize is changed" INDEX { cvSipMsgRateWMIntvlDurUnits, cvSipMsgRateWMIndex } ::= { cvSipMsgRateWMTable 1 } CvSipMsgRateWMEntry ::= SEQUENCE { cvSipMsgRateWMIntvlDurUnits CvCallVolumeWMIntvlType, cvSipMsgRateWMIndex Unsigned32, cvSipMsgRateWMValue Unsigned32, cvSipMsgRateWMts DateAndTime } cvSipMsgRateWMIntvlDurUnits OBJECT-TYPE SYNTAX CvCallVolumeWMIntvlType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Object indexes in SIP Message rate Water mark Table to select one among four interval-tables. The different types in this table are represented by CvCallVolumeWMIntvlType" ::= { cvSipMsgRateWMEntry 1 } cvSipMsgRateWMIndex OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an index that references to different peaks in past period in sip message rate watermark table. The number of watermarks entries stored for each table are based on cvCallVolumeWMTableSize" ::= { cvSipMsgRateWMEntry 2 } cvSipMsgRateWMValue OBJECT-TYPE SYNTAX Unsigned32 UNITS "SIP messages per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates high watermark value achieved by the SIP messages per second for the given interval" ::= { cvSipMsgRateWMEntry 3 } cvSipMsgRateWMts OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates date and time when the high watermark is achieved for SIP messages per second for the given interval" ::= { cvSipMsgRateWMEntry 4 } cvCallDurationStatsThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This Object specifies the thresold duration in seconds. cvCallDurationStatsTable will monitor all the calls below this threshold. Decresing the value of the threshold will reset this table." DEFVAL { 5 } ::= { cvCallVolumeStatsHistory 10 } cvCallVolumeWMTableSize OBJECT-TYPE SYNTAX Unsigned32 (3..10) MAX-ACCESS read-write STATUS current DESCRIPTION "This Object specifies the number of entries the watermark table will maintain. This value will decide the number of elements in cvCallRateWMTable, cvCallLegRateWMTable, cvActiveCallWMTable and cvSipMsgRateWMTable." DEFVAL { 5 } ::= { cvCallVolumeStatsHistory 11 } -- ********************************************************************* -- Notifications -- ********************************************************************* cvdcMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoVoiceDialControlMIB 2 } cvdcMIBNotifications OBJECT IDENTIFIER ::= { cvdcMIBNotificationPrefix 0 } cvdcPoorQoVNotification NOTIFICATION-TYPE OBJECTS { cvVoIPCallHistoryConnectionId, cvVoIPCallHistoryIcpif, cvVoIPCallHistoryRemoteIPAddress, cCallHistoryCallOrigin, cvCommonDcCallHistoryCoderTypeRate } STATUS deprecated DESCRIPTION "Poor quality of voice notification. A cvdcPoorQoVNotification is sent at the call disconnection time if the value of cvVoIPCallHistoryIcpif exceeds the value of cvVoIPPeerCfgIcpif in the call associated peer." ::= { cvdcMIBNotifications 1 } cvdcPoorQoVNotificationRev1 NOTIFICATION-TYPE OBJECTS { cvVoIPCallHistoryConnectionId, cvVoIPCallHistoryIcpif, cvVoIPCallHistoryRemMediaIPAddrT, cvVoIPCallHistoryRemMediaIPAddr, cCallHistoryCallOrigin, cvCommonDcCallHistoryCoderTypeRate } STATUS current DESCRIPTION "Poor quality of voice notification. A cvdcPoorQoVNotificationRev1 is sent at the call disconnection time if the value of cvVoIPCallHistoryIcpif exceeds the value of cvVoIPPeerCfgIcpif in the call associated peer." ::= { cvdcMIBNotifications 2 } cvdcActiveDS0sHighNotification NOTIFICATION-TYPE OBJECTS { cvCallActiveDS0s, cvCallActiveDS0sHighThreshold } STATUS current DESCRIPTION "The cvdcActiveDS0sHighNotification is sent when the percentage of active DS0s exceeds cvCallActiveDS0sHighThreshold value." ::= { cvdcMIBNotifications 3 } cvdcActiveDS0sLowNotification NOTIFICATION-TYPE OBJECTS { cvCallActiveDS0s, cvCallActiveDS0sLowThreshold } STATUS current DESCRIPTION "The cvdcActiveDS0sLowNotification is sent when the percentage of active DS0s is less than cvCallActiveDS0sLowThreshold value." ::= { cvdcMIBNotifications 4 } cvdcFallbackNotification NOTIFICATION-TYPE OBJECTS { cvVoIPCallHistoryConnectionId, cvVoIPCallHistoryFallbackIcpif, cvVoIPCallHistoryFallbackLoss, cvVoIPCallHistoryFallbackDelay, cvVoIPCallHistoryRemSigIPAddrT, cvVoIPCallHistoryRemSigIPAddr, cvVoIPCallHistoryRemMediaIPAddrT, cvVoIPCallHistoryRemMediaIPAddr, cCallHistoryCallOrigin, cvCommonDcCallHistoryCoderTypeRate } STATUS current DESCRIPTION "This cvdcFallbackNotificaion is sent out, when the destination IP address of call fallback probe fails. This probe generated for beginning of each call, with exception of existing cached entry." ::= { cvdcMIBNotifications 5 } cvdcPolicyViolationNotification NOTIFICATION-TYPE OBJECTS { ccVoIPCallActivePolicyName, cvVoIPCallActiveReversedDirectionPeerAddress, callActivePeerId, callActivePeerAddress } STATUS current DESCRIPTION "Policy violation voice notification. A cvdcPolicyViolationNotification is sent when the call is active and has policy violation. It can be media policy violation or DSCP policy violation." ::= { cvdcMIBNotifications 6 } cvdcMIBConformance OBJECT IDENTIFIER ::= { ciscoVoiceDialControlMIB 3 } cvdcMIBCompliances OBJECT IDENTIFIER ::= { cvdcMIBConformance 1 } cvdcMIBGroups OBJECT IDENTIFIER ::= { cvdcMIBConformance 2 } -- compliance statements cvdcMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroup } GROUP cvdcVoiceCfgGroup DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroup DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroup DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroup DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 1 } cvdcMIBComplianceRev1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev1 } GROUP cvdcVoiceCfgGroupRev1 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroup DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroup DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev1 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 2 } cvdcMIBComplianceRev2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev2 } GROUP cvdcVoiceCfgGroupRev1 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev1 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev1 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev1 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 3 } cvdcMIBComplianceRev3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev3 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev2 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev1 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev3 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 4 } cvdcMIBComplianceRev4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev4 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev2 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev1 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev3 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 5 } cvdcMIBComplianceRev5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev3 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev2 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev2 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev3 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 6 } cvdcMIBComplianceRev6 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev3 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev2 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev2 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev4 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 7 } cvdcMIBComplianceRev7 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev4 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev2 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev2 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev4 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 8 } cvdcMIBComplianceRev8 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev3 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev2 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev4 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 9 } cvdcMIBComplianceRev9 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev3 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev4 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 10 } cvdcMIBComplianceRev10 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev4 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev4 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 11 } cvdcMIBComplianceRev11 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev4 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev5 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 12 } cvdcMIBComplianceRev12 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev5 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 13 } cvdcMIBComplianceRev13 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." ::= { cvdcMIBCompliances 14 } cvdcMIBComplianceRev14 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." GROUP cvdcNotificationGroupRev3 DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." ::= { cvdcMIBCompliances 15 } cvdcMIBComplianceRev15 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." GROUP cvdcNotificationGroupRev3 DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." GROUP cvdcVoIPCfgAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec configuration." GROUP cvVoIPCallAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec." ::= { cvdcMIBCompliances 16 } cvdcMIBComplianceRev16 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO VOICE DIAL CONTROL MIB" MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." GROUP cvdcNotificationGroupRev3 DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." GROUP cvdcVoIPCfgAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec configuration." GROUP cvVoIPCallAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec." GROUP cvdcVoIPCfgIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec configuration." GROUP cvVoIPCallIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec." ::= { cvdcMIBCompliances 17 } cvdcMIBComplianceRev17 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the entities that implement CISCO-VOICE-DIAL-CONTROL-MIB." MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." GROUP cvdcNotificationGroupRev3 DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." GROUP cvdcVoIPCfgAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec configuration." GROUP cvVoIPCallAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec." GROUP cvdcVoIPCfgIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec configuration." GROUP cvVoIPCallIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec." GROUP cvCallGroupSup1 DESCRIPTION "This group is mandatory to track voice-related active calls and call-history via GSTN." GROUP cvVoIPCallGroupSup1 DESCRIPTION "This group is mandatory to track VoIP-related active calls and call-history via IP network." ::= { cvdcMIBCompliances 18 } cvdcMIBComplianceRev18 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the entities that implement CISCO-VOICE-DIAL-CONTROL-MIB." MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." GROUP cvdcNotificationGroupRev3 DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." GROUP cvdcVoIPCfgAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec configuration." GROUP cvVoIPCallAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec." GROUP cvdcVoIPCfgIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec configuration." GROUP cvVoIPCallIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec." GROUP cvCallGroupSup1 DESCRIPTION "This group is mandatory to track voice-related active calls and call-history via GSTN." GROUP cvVoIPCallGroupSup1 DESCRIPTION "This group is mandatory to track VoIP-related active calls and call-history via IP network." GROUP cvCallVolumeGroup DESCRIPTION "This group is mandatory to track per-protocol active calls." GROUP cvCallRateMonitorGroup DESCRIPTION "This group is mandatory to track call-rate." ::= { cvdcMIBCompliances 19 } cvdcMIBComplianceRev19 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the entities that implement CISCO-VOICE-DIAL-CONTROL-MIB." MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." GROUP cvdcNotificationGroupRev3 DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." GROUP cvdcVoIPCfgAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec configuration." GROUP cvVoIPCallAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec." GROUP cvdcVoIPCfgIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec configuration." GROUP cvVoIPCallIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec." GROUP cvCallGroupSup1 DESCRIPTION "This group is mandatory to track voice-related active calls and call-history via GSTN." GROUP cvVoIPCallGroupSup1 DESCRIPTION "This group is mandatory to track VoIP-related active calls and call-history via IP network." GROUP cvCallVolumeGroup DESCRIPTION "This group is mandatory to track per-protocol active calls." GROUP cvCallRateMonitorGroup DESCRIPTION "This group is mandatory to track call-rate." GROUP cvdcVoIPCfgISACGroup DESCRIPTION "This group is mandatory only for those platforms which support iSAC codec configuration." ::= { cvdcMIBCompliances 20 } cvdcMIBComplianceRev20 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the entities that implement CISCO-VOICE-DIAL-CONTROL-MIB." MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." GROUP cvdcVoIPCfgAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec configuration." GROUP cvVoIPCallAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec." GROUP cvdcVoIPCfgIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec configuration." GROUP cvVoIPCallIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec." GROUP cvCallGroupSup1 DESCRIPTION "This group is mandatory to track voice-related active calls and call-history via GSTN." GROUP cvCallVolumeGroup DESCRIPTION "This group is mandatory to track per-protocol active calls." GROUP cvCallRateMonitorGroup DESCRIPTION "This group is mandatory to track call-rate." GROUP cvdcVoIPCfgISACGroup DESCRIPTION "This group is mandatory only for those platforms which support iSAC codec configuration." GROUP cvVoIPCallGroupSup2 DESCRIPTION "This group supplements cvVoIPCallGroup to provide the call identifier and policy for the VoIP leg of the gateway call" GROUP cvdcNotificationGroupRev4 DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." ::= { cvdcMIBCompliances 21 } cvdcMIBComplianceRev21 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the entities that implement CISCO-VOICE-DIAL-CONTROL-MIB." MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." GROUP cvdcVoIPCfgAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec configuration." GROUP cvVoIPCallAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec." GROUP cvdcVoIPCfgIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec configuration." GROUP cvVoIPCallIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec." GROUP cvCallGroupSup1 DESCRIPTION "This group is mandatory to track voice-related active calls and call-history via GSTN." GROUP cvCallVolumeGroup DESCRIPTION "This group is mandatory to track per-protocol active calls." GROUP cvCallRateMonitorGroup DESCRIPTION "This group is mandatory to track call-rate." GROUP cvdcVoIPCfgISACGroup DESCRIPTION "This group is mandatory only for those platforms which support iSAC codec configuration." GROUP cvVoIPCallGroupSup3 DESCRIPTION "This group is mandatory for all VoIP calls. It supplements cvVoIPCallGroup to provide the call identifier and policy for the VoIP leg of the gateway call." GROUP cvdcNotificationGroupRev4 DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." ::= { cvdcMIBCompliances 22 } cvdcMIBComplianceRev22 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the entities that implement CISCO-VOICE-DIAL-CONTROL-MIB." MODULE -- this module MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 } GROUP cvdcVoiceCfgGroupRev2 DESCRIPTION "This group is mandatory for voice dial control configuration which is related to GSTN(General Switched Telephony Network). GSTN encompasses analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." GROUP cvdcVoIPCfgGroupRev4 DESCRIPTION "This group is mandatory for VoIP dial control configuration which is related to transmit voice packet via IP network." GROUP cvCallGroupRev5 DESCRIPTION "This group is mandatory for all voice related active call and call history via GSTN." GROUP cvVoIPCallGroupRev6 DESCRIPTION "This group is mandatory for all VoIP related active call and call history via IP network." GROUP cvdcVoIPCfgAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec configuration." GROUP cvVoIPCallAmrNbGroup DESCRIPTION "This group is mandatory only for those platforms which support GSM AMR-NB codec." GROUP cvdcVoIPCfgIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec configuration." GROUP cvVoIPCallIlbcGroup DESCRIPTION "This group is mandatory only for those platforms which support iLBC codec." GROUP cvCallGroupSup1 DESCRIPTION "This group is mandatory to track voice-related active calls and call-history via GSTN." GROUP cvCallVolumeGroup DESCRIPTION "This group is mandatory to track per-protocol active calls." GROUP cvCallRateMonitorGroup DESCRIPTION "This group is mandatory to track call-rate." GROUP cvdcVoIPCfgISACGroup DESCRIPTION "This group is mandatory only for those platforms which support iSAC codec configuration." GROUP cvVoIPCallGroupSup3 DESCRIPTION "This group is mandatory for all VoIP calls. It supplements cvVoIPCallGroup to provide the call identifier and policy for the VoIP leg of the gateway call." GROUP cvdcNotificationGroupRev4 DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." GROUP cvdcCallVolumeStatsHistory DESCRIPTION "This group is mandatory to track voice related call volume stats history" ::= { cvdcMIBCompliances 23 } -- units of conformance cvdcGeneralCfgGroup OBJECT-GROUP OBJECTS { cvGeneralPoorQoVNotificationEnable, cvPeerCfgIfIndex, cvPeerCfgType, cvPeerCfgRowStatus } STATUS deprecated DESCRIPTION "A collection of objects providing the general Voice Gateway Call Dial Control configuration capability. cvdcGeneralCfgGroup group is superseded by cvdcGeneralCfgGroupRev1." ::= { cvdcMIBGroups 1 } cvdcVoiceCfgGroup OBJECT-GROUP OBJECTS { cvVoicePeerCfgSessionTarget, cvVoicePeerCfgDialDigitsPrefix } STATUS deprecated DESCRIPTION "A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure. cvdcVoiceCfgGroup group is superseded by cvdcVoiceCfgGroupRev1." ::= { cvdcMIBGroups 2 } cvdcVoIPCfgGroup OBJECT-GROUP OBJECTS { cvVoIPPeerCfgSessionProtocol, cvVoIPPeerCfgSessionTarget, cvVoIPPeerCfgCoderRate, cvVoIPPeerCfgFaxRate, cvVoIPPeerCfgDesiredQoS, cvVoIPPeerCfgMinAcceptableQoS, cvVoIPPeerCfgVADEnable, cvVoIPPeerCfgExpectFactor, cvVoIPPeerCfgIcpif, cvVoIPPeerCfgPoorQoVNotificationEnable, cvVoIPPeerCfgUDPChecksumEnable, cvVoIPPeerCfgIPPrecedence } STATUS deprecated DESCRIPTION "A collection of objects providing the VoIP Dial Control configuration capability. cvdcVoIPCfgGroup group is superseded by cvdcVoIPCfgGroupRev1." ::= { cvdcMIBGroups 3 } cvCallGroup OBJECT-GROUP OBJECTS { cvCallActiveConnectionId, cvCallActiveTxDuration, cvCallActiveVoiceTxDuration, cvCallActiveFaxTxDuration, cvCallActiveCoderTypeRate, cvCallActiveNoiseLevel, cvCallActiveACOMLevel, cvCallActiveOutSignalLevel, cvCallActiveInSignalLevel, cvCallActiveERLLevel, cvCallActiveSessionTarget, cvCallHistoryConnectionId, cvCallHistoryTxDuration, cvCallHistoryVoiceTxDuration, cvCallHistoryFaxTxDuration, cvCallHistoryCoderTypeRate, cvCallHistoryNoiseLevel, cvCallHistoryACOMLevel, cvCallHistorySessionTarget } STATUS deprecated DESCRIPTION "A collection of objects providing the GSTN (General Switched Telephony Network Voice Call capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure. cvCallGroup group is superseded by cvCallGroupRev1." ::= { cvdcMIBGroups 4 } cvVoIPCallGroup OBJECT-GROUP OBJECTS { cvVoIPCallActiveConnectionId, cvVoIPCallActiveRemoteIPAddress, cvVoIPCallActiveRemoteUDPPort, cvVoIPCallActiveRoundTripDelay, cvVoIPCallActiveSelectedQoS, cvVoIPCallActiveSessionProtocol, cvVoIPCallActiveSessionTarget, cvVoIPCallActiveOnTimeRvPlayout, cvVoIPCallActiveGapFillWithSilence, cvVoIPCallActiveGapFillWithPrediction, cvVoIPCallActiveGapFillWithInterpolation, cvVoIPCallActiveGapFillWithRedundancy, cvVoIPCallActiveHiWaterPlayoutDelay, cvVoIPCallActiveLoWaterPlayoutDelay, cvVoIPCallActiveReceiveDelay, cvVoIPCallActiveVADEnable, cvVoIPCallActiveCoderTypeRate, cvVoIPCallHistoryConnectionId, cvVoIPCallHistoryRemoteIPAddress, cvVoIPCallHistoryRemoteUDPPort, cvVoIPCallHistoryRoundTripDelay, cvVoIPCallHistorySelectedQoS, cvVoIPCallHistorySessionProtocol, cvVoIPCallHistorySessionTarget, cvVoIPCallHistoryOnTimeRvPlayout, cvVoIPCallHistoryGapFillWithSilence, cvVoIPCallHistoryGapFillWithPrediction, cvVoIPCallHistoryGapFillWithInterpolation, cvVoIPCallHistoryGapFillWithRedundancy, cvVoIPCallHistoryHiWaterPlayoutDelay, cvVoIPCallHistoryLoWaterPlayoutDelay, cvVoIPCallHistoryReceiveDelay, cvVoIPCallHistoryVADEnable, cvVoIPCallHistoryCoderTypeRate, cvVoIPCallHistoryIcpif } STATUS deprecated DESCRIPTION "A collection of objects providing the VoIP Call capability. cvVoIPCallGroup group is superseded by cvVoIPCallGroupRev1." ::= { cvdcMIBGroups 5 } cvdcGeneralCfgGroupRev1 OBJECT-GROUP OBJECTS { cvGeneralPoorQoVNotificationEnable, cvPeerCfgIfIndex, cvPeerCfgType, cvPeerCfgRowStatus, cvPeerCommonCfgIncomingDnisDigits, cvPeerCommonCfgMaxConnections, cvPeerCommonCfgApplicationName } STATUS deprecated DESCRIPTION "A collection of objects providing the general Voice Gateway Call Dial Control configuration capability. cvdcGeneralCfgGroupRev1 group is superseded by cvdcGeneralCfgGroupRev2." ::= { cvdcMIBGroups 6 } cvdcVoiceCfgGroupRev1 OBJECT-GROUP OBJECTS { cvVoicePeerCfgSessionTarget, cvVoicePeerCfgDialDigitsPrefix, cvVoicePeerCfgDIDCallEnable, cvVoicePeerCfgCasGroup } STATUS deprecated DESCRIPTION "A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure. cvdcVoiceCfgGroupRev1 group is superseded by cvdcVoiceCfgGroupRev2." ::= { cvdcMIBGroups 7 } cvVoIPCallGroupRev1 OBJECT-GROUP OBJECTS { cvVoIPCallActiveConnectionId, cvVoIPCallActiveRemoteIPAddress, cvVoIPCallActiveRemoteUDPPort, cvVoIPCallActiveRoundTripDelay, cvVoIPCallActiveSelectedQoS, cvVoIPCallActiveSessionProtocol, cvVoIPCallActiveSessionTarget, cvVoIPCallActiveOnTimeRvPlayout, cvVoIPCallActiveGapFillWithSilence, cvVoIPCallActiveGapFillWithPrediction, cvVoIPCallActiveGapFillWithInterpolation, cvVoIPCallActiveGapFillWithRedundancy, cvVoIPCallActiveHiWaterPlayoutDelay, cvVoIPCallActiveLoWaterPlayoutDelay, cvVoIPCallActiveReceiveDelay, cvVoIPCallActiveVADEnable, cvVoIPCallActiveCoderTypeRate, cvVoIPCallActiveLostPackets, cvVoIPCallActiveLatePackets, cvVoIPCallActiveEarlyPackets, cvVoIPCallHistoryConnectionId, cvVoIPCallHistoryRemoteIPAddress, cvVoIPCallHistoryRemoteUDPPort, cvVoIPCallHistoryRoundTripDelay, cvVoIPCallHistorySelectedQoS, cvVoIPCallHistorySessionProtocol, cvVoIPCallHistorySessionTarget, cvVoIPCallHistoryOnTimeRvPlayout, cvVoIPCallHistoryGapFillWithSilence, cvVoIPCallHistoryGapFillWithPrediction, cvVoIPCallHistoryGapFillWithInterpolation, cvVoIPCallHistoryGapFillWithRedundancy, cvVoIPCallHistoryHiWaterPlayoutDelay, cvVoIPCallHistoryLoWaterPlayoutDelay, cvVoIPCallHistoryReceiveDelay, cvVoIPCallHistoryVADEnable, cvVoIPCallHistoryCoderTypeRate, cvVoIPCallHistoryIcpif, cvVoIPCallHistoryLostPackets, cvVoIPCallHistoryLatePackets, cvVoIPCallHistoryEarlyPackets } STATUS deprecated DESCRIPTION "A collection of objects providing the VoIP Call capability. cvVoIPCallGroupRev1 group is superseded by cvVoIPCallGroupRev2." ::= { cvdcMIBGroups 8 } cvCallGroupRev1 OBJECT-GROUP OBJECTS { cvCallActiveConnectionId, cvCallActiveTxDuration, cvCallActiveVoiceTxDuration, cvCallActiveFaxTxDuration, cvCallActiveCoderTypeRate, cvCallActiveNoiseLevel, cvCallActiveACOMLevel, cvCallActiveOutSignalLevel, cvCallActiveInSignalLevel, cvCallActiveERLLevel, cvCallActiveSessionTarget, cvCallActiveImgPageCount, cvCallHistoryConnectionId, cvCallHistoryTxDuration, cvCallHistoryVoiceTxDuration, cvCallHistoryFaxTxDuration, cvCallHistoryCoderTypeRate, cvCallHistoryNoiseLevel, cvCallHistoryACOMLevel, cvCallHistorySessionTarget, cvCallHistoryImgPageCount } STATUS deprecated DESCRIPTION "A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure. cvCallGroupRev1 group is superseded by cvCallGroupRev2." ::= { cvdcMIBGroups 9 } cvdcGeneralCfgGroupRev2 OBJECT-GROUP OBJECTS { cvGeneralPoorQoVNotificationEnable, cvPeerCfgIfIndex, cvPeerCfgType, cvPeerCfgRowStatus, cvPeerCommonCfgIncomingDnisDigits, cvPeerCommonCfgMaxConnections, cvPeerCommonCfgApplicationName, cvPeerCommonCfgPreference } STATUS deprecated DESCRIPTION "A collection of objects providing the general Voice Gateway Call Dial Control configuration capability. cvdcGeneralCfgGroupRev2 group is superseded by cvdcGeneralCfgGroupRev3." ::= { cvdcMIBGroups 10 } cvdcVoIPCfgGroupRev1 OBJECT-GROUP OBJECTS { cvVoIPPeerCfgSessionProtocol, cvVoIPPeerCfgSessionTarget, cvVoIPPeerCfgCoderRate, cvVoIPPeerCfgFaxRate, cvVoIPPeerCfgDesiredQoS, cvVoIPPeerCfgMinAcceptableQoS, cvVoIPPeerCfgVADEnable, cvVoIPPeerCfgExpectFactor, cvVoIPPeerCfgIcpif, cvVoIPPeerCfgPoorQoVNotificationEnable, cvVoIPPeerCfgUDPChecksumEnable, cvVoIPPeerCfgIPPrecedence, cvVoIPPeerCfgTechPrefix, cvVoIPPeerCfgDigitRelay } STATUS deprecated DESCRIPTION "A collection of objects providing the VoIP Dial Control configuration capability. cvdcVoIPCfgGroupRev1 group is superseded by cvdcVoIPCfgGroupRev2." ::= { cvdcMIBGroups 11 } cvdcGeneralCfgGroupRev3 OBJECT-GROUP OBJECTS { cvGeneralPoorQoVNotificationEnable, cvPeerCfgIfIndex, cvPeerCfgType, cvPeerCfgRowStatus, cvPeerCommonCfgIncomingDnisDigits, cvPeerCommonCfgMaxConnections, cvPeerCommonCfgApplicationName, cvPeerCommonCfgPreference, cvPeerCommonCfgHuntStop } STATUS deprecated DESCRIPTION "A collection of objects providing the general Voice Gateway Call Dial Control configuration capability. cvdcGeneralCfgGroupRev3 group is superseded by cvdcGeneralCfgGroupRev4." ::= { cvdcMIBGroups 12 } cvdcVoiceCfgGroupRev2 OBJECT-GROUP OBJECTS { cvVoicePeerCfgSessionTarget, cvVoicePeerCfgDialDigitsPrefix, cvVoicePeerCfgDIDCallEnable, cvVoicePeerCfgCasGroup, cvVoicePeerCfgRegisterE164, cvVoicePeerCfgForwardDigits, cvVoicePeerCfgEchoCancellerTest } STATUS current DESCRIPTION "A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." ::= { cvdcMIBGroups 13 } cvdcVoIPCfgGroupRev2 OBJECT-GROUP OBJECTS { cvVoIPPeerCfgSessionProtocol, cvVoIPPeerCfgSessionTarget, cvVoIPPeerCfgCoderRate, cvVoIPPeerCfgFaxRate, cvVoIPPeerCfgDesiredQoS, cvVoIPPeerCfgMinAcceptableQoS, cvVoIPPeerCfgVADEnable, cvVoIPPeerCfgExpectFactor, cvVoIPPeerCfgIcpif, cvVoIPPeerCfgPoorQoVNotificationEnable, cvVoIPPeerCfgUDPChecksumEnable, cvVoIPPeerCfgIPPrecedence, cvVoIPPeerCfgTechPrefix, cvVoIPPeerCfgDigitRelay, cvVoIPPeerCfgCoderBytes, cvVoIPPeerCfgFaxBytes, cvVoIPPeerCfgInBandSignaling } STATUS deprecated DESCRIPTION "A collection of objects providing the VoIP Dial Control configuration capability. cvdcVoIPCfgGroupRev2 group is superseded by cvdcVoIPCfgGroupRev3." ::= { cvdcMIBGroups 14 } cvVoIPCallGroupRev3 OBJECT-GROUP OBJECTS { cvVoIPCallActiveConnectionId, cvVoIPCallActiveRemoteIPAddress, cvVoIPCallActiveRemoteUDPPort, cvVoIPCallActiveRoundTripDelay, cvVoIPCallActiveSelectedQoS, cvVoIPCallActiveSessionProtocol, cvVoIPCallActiveSessionTarget, cvVoIPCallActiveOnTimeRvPlayout, cvVoIPCallActiveGapFillWithSilence, cvVoIPCallActiveGapFillWithPrediction, cvVoIPCallActiveGapFillWithInterpolation, cvVoIPCallActiveGapFillWithRedundancy, cvVoIPCallActiveHiWaterPlayoutDelay, cvVoIPCallActiveLoWaterPlayoutDelay, cvVoIPCallActiveReceiveDelay, cvVoIPCallActiveLostPackets, cvVoIPCallActiveLatePackets, cvVoIPCallActiveEarlyPackets, cvVoIPCallHistoryConnectionId, cvVoIPCallHistoryRemoteIPAddress, cvVoIPCallHistoryRemoteUDPPort, cvVoIPCallHistoryRoundTripDelay, cvVoIPCallHistorySelectedQoS, cvVoIPCallHistorySessionProtocol, cvVoIPCallHistorySessionTarget, cvVoIPCallHistoryOnTimeRvPlayout, cvVoIPCallHistoryGapFillWithSilence, cvVoIPCallHistoryGapFillWithPrediction, cvVoIPCallHistoryGapFillWithInterpolation, cvVoIPCallHistoryGapFillWithRedundancy, cvVoIPCallHistoryHiWaterPlayoutDelay, cvVoIPCallHistoryLoWaterPlayoutDelay, cvVoIPCallHistoryReceiveDelay, cvVoIPCallHistoryIcpif, cvVoIPCallHistoryLostPackets, cvVoIPCallHistoryLatePackets, cvVoIPCallHistoryEarlyPackets } STATUS deprecated DESCRIPTION "A collection of objects providing the VoIP Call capability. cvVoIPCallGroupRev3 group is superseded by cvVoIPCallGroupRev4." ::= { cvdcMIBGroups 15 } cvdcNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { cvdcPoorQoVNotification } STATUS deprecated DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB cvdcNotificationGroup group is superseded by cvdcNotificationGroupRev1." ::= { cvdcMIBGroups 16 } cvCallGroupRev2 OBJECT-GROUP OBJECTS { cvCallActiveConnectionId, cvCallActiveTxDuration, cvCallActiveVoiceTxDuration, cvCallActiveFaxTxDuration, cvCallActiveCoderTypeRate, cvCallActiveNoiseLevel, cvCallActiveACOMLevel, cvCallActiveOutSignalLevel, cvCallActiveInSignalLevel, cvCallActiveERLLevel, cvCallActiveSessionTarget, cvCallActiveImgPageCount, cvCallActiveCallingName, cvCallActiveCallerIDBlock, cvCallActiveEcanReflectorLocation, cvCallHistoryConnectionId, cvCallHistoryTxDuration, cvCallHistoryVoiceTxDuration, cvCallHistoryFaxTxDuration, cvCallHistoryCoderTypeRate, cvCallHistoryNoiseLevel, cvCallHistoryACOMLevel, cvCallHistorySessionTarget, cvCallHistoryImgPageCount, cvCallHistoryCallingName, cvCallHistoryCallerIDBlock } STATUS deprecated DESCRIPTION "A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure. cvCallGroupRev2 group is superseded by cvCallGroupRev3." ::= { cvdcMIBGroups 17 } cvdcGeneralCfgGroupRev4 OBJECT-GROUP OBJECTS { cvGeneralPoorQoVNotificationEnable, cvPeerCfgIfIndex, cvPeerCfgType, cvPeerCfgRowStatus, cvPeerCommonCfgIncomingDnisDigits, cvPeerCommonCfgMaxConnections, cvPeerCommonCfgApplicationName, cvPeerCommonCfgPreference, cvPeerCommonCfgHuntStop, cvPeerCommonCfgDnisMappingName, cvPeerCommonCfgSourceCarrierId, cvPeerCommonCfgTargetCarrierId, cvPeerCommonCfgSourceTrunkGrpLabel, cvPeerCommonCfgTargetTrunkGrpLabel } STATUS deprecated DESCRIPTION "A collection of objects providing the general Voice Gateway Call Dial Control configuration capability. cvdcGeneralCfgGroupRev4 group is superseded by cvdcGeneralCfgGroupRev5." ::= { cvdcMIBGroups 18 } cvVoIPCallGroupRev4 OBJECT-GROUP OBJECTS { cvVoIPCallActiveConnectionId, cvVoIPCallActiveRoundTripDelay, cvVoIPCallActiveSelectedQoS, cvVoIPCallActiveSessionProtocol, cvVoIPCallActiveSessionTarget, cvVoIPCallActiveOnTimeRvPlayout, cvVoIPCallActiveGapFillWithSilence, cvVoIPCallActiveGapFillWithPrediction, cvVoIPCallActiveGapFillWithInterpolation, cvVoIPCallActiveGapFillWithRedundancy, cvVoIPCallActiveHiWaterPlayoutDelay, cvVoIPCallActiveLoWaterPlayoutDelay, cvVoIPCallActiveReceiveDelay, cvVoIPCallActiveLostPackets, cvVoIPCallActiveLatePackets, cvVoIPCallActiveEarlyPackets, cvVoIPCallActiveUsername, cvVoIPCallActiveProtocolCallId, cvVoIPCallActiveRemSigIPAddrT, cvVoIPCallActiveRemSigIPAddr, cvVoIPCallActiveRemSigPort, cvVoIPCallActiveRemMediaIPAddrT, cvVoIPCallActiveRemMediaIPAddr, cvVoIPCallActiveRemMediaPort, cvVoIPCallHistoryConnectionId, cvVoIPCallHistoryRoundTripDelay, cvVoIPCallHistorySelectedQoS, cvVoIPCallHistorySessionProtocol, cvVoIPCallHistorySessionTarget, cvVoIPCallHistoryOnTimeRvPlayout, cvVoIPCallHistoryGapFillWithSilence, cvVoIPCallHistoryGapFillWithPrediction, cvVoIPCallHistoryGapFillWithInterpolation, cvVoIPCallHistoryGapFillWithRedundancy, cvVoIPCallHistoryHiWaterPlayoutDelay, cvVoIPCallHistoryLoWaterPlayoutDelay, cvVoIPCallHistoryReceiveDelay, cvVoIPCallHistoryIcpif, cvVoIPCallHistoryLostPackets, cvVoIPCallHistoryLatePackets, cvVoIPCallHistoryEarlyPackets, cvVoIPCallHistoryUsername, cvVoIPCallHistoryProtocolCallId, cvVoIPCallHistoryRemSigIPAddrT, cvVoIPCallHistoryRemSigIPAddr, cvVoIPCallHistoryRemSigPort, cvVoIPCallHistoryRemMediaIPAddrT, cvVoIPCallHistoryRemMediaIPAddr, cvVoIPCallHistoryRemMediaPort } STATUS deprecated DESCRIPTION "A collection of objects providing the VoIP Call capability. cvVoIPCallGroupRev4 group is superseded by cvVoIPCallGroupRev5." ::= { cvdcMIBGroups 19 } cvdcNotificationGroupRev1 NOTIFICATION-GROUP NOTIFICATIONS { cvdcPoorQoVNotificationRev1 } STATUS deprecated DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB cvdcNotificationGroupRev1 group is superseded by cvdcNotificationGroupRev2." ::= { cvdcMIBGroups 20 } cvdcVoIPCfgGroupRev3 OBJECT-GROUP OBJECTS { cvVoIPPeerCfgSessionProtocol, cvVoIPPeerCfgSessionTarget, cvVoIPPeerCfgCoderRate, cvVoIPPeerCfgFaxRate, cvVoIPPeerCfgDesiredQoS, cvVoIPPeerCfgMinAcceptableQoS, cvVoIPPeerCfgVADEnable, cvVoIPPeerCfgExpectFactor, cvVoIPPeerCfgIcpif, cvVoIPPeerCfgPoorQoVNotificationEnable, cvVoIPPeerCfgUDPChecksumEnable, cvVoIPPeerCfgIPPrecedence, cvVoIPPeerCfgTechPrefix, cvVoIPPeerCfgDigitRelay, cvVoIPPeerCfgCoderBytes, cvVoIPPeerCfgFaxBytes, cvVoIPPeerCfgInBandSignaling } STATUS deprecated DESCRIPTION "A collection of objects providing the VoIP Dial Control configuration capability. cvdcVoIPCfgGroupRev3 group is superseded by cvdcVoIPCfgGroupRev4." ::= { cvdcMIBGroups 21 } cvdcGeneralCfgGroupRev5 OBJECT-GROUP OBJECTS { cvGeneralPoorQoVNotificationEnable, cvPeerCfgIfIndex, cvPeerCfgType, cvPeerCfgRowStatus, cvPeerCfgPeerType, cvPeerCommonCfgIncomingDnisDigits, cvPeerCommonCfgMaxConnections, cvPeerCommonCfgApplicationName, cvPeerCommonCfgPreference, cvPeerCommonCfgHuntStop, cvPeerCommonCfgDnisMappingName, cvPeerCommonCfgSourceCarrierId, cvPeerCommonCfgTargetCarrierId, cvPeerCommonCfgSourceTrunkGrpLabel, cvPeerCommonCfgTargetTrunkGrpLabel } STATUS deprecated DESCRIPTION "A collection of objects providing the general Voice Gateway Call Dial Control configuration capability. cvdcGeneralCfgGroupRev5 group is superseded by cvdcGeneralCfgGroupRev6." ::= { cvdcMIBGroups 22 } cvdcVoIPCfgGroupRev4 OBJECT-GROUP OBJECTS { cvVoIPPeerCfgSessionProtocol, cvVoIPPeerCfgSessionTarget, cvVoIPPeerCfgCoderRate, cvVoIPPeerCfgFaxRate, cvVoIPPeerCfgDesiredQoS, cvVoIPPeerCfgMinAcceptableQoS, cvVoIPPeerCfgVADEnable, cvVoIPPeerCfgExpectFactor, cvVoIPPeerCfgIcpif, cvVoIPPeerCfgPoorQoVNotificationEnable, cvVoIPPeerCfgUDPChecksumEnable, cvVoIPPeerCfgIPPrecedence, cvVoIPPeerCfgTechPrefix, cvVoIPPeerCfgDigitRelay, cvVoIPPeerCfgCoderBytes, cvVoIPPeerCfgFaxBytes, cvVoIPPeerCfgInBandSignaling, cvVoIPPeerCfgMediaSetting, cvVoIPPeerCfgDesiredQoSVideo, cvVoIPPeerCfgMinAcceptableQoSVideo, cvVoIPPeerCfgRedirectip2ip, cvVoIPPeerCfgDSCPPolicyNotificationEnable, cvVoIPPeerCfgMediaPolicyNotificationEnable } STATUS current DESCRIPTION "A collection of objects providing the VoIP Dial Control configuration capability." ::= { cvdcMIBGroups 23 } cvCallGroupRev3 OBJECT-GROUP OBJECTS { cvCallActiveConnectionId, cvCallActiveTxDuration, cvCallActiveVoiceTxDuration, cvCallActiveFaxTxDuration, cvCallActiveCoderTypeRate, cvCallActiveNoiseLevel, cvCallActiveACOMLevel, cvCallActiveOutSignalLevel, cvCallActiveInSignalLevel, cvCallActiveERLLevel, cvCallActiveSessionTarget, cvCallActiveImgPageCount, cvCallActiveCallingName, cvCallActiveCallerIDBlock, cvCallActiveEcanReflectorLocation, cvCallActiveAccountCode, cvCallHistoryConnectionId, cvCallHistoryTxDuration, cvCallHistoryVoiceTxDuration, cvCallHistoryFaxTxDuration, cvCallHistoryCoderTypeRate, cvCallHistoryNoiseLevel, cvCallHistoryACOMLevel, cvCallHistorySessionTarget, cvCallHistoryImgPageCount, cvCallHistoryCallingName, cvCallHistoryCallerIDBlock, cvCallHistoryAccountCode, cvCallActiveERLLevelRev1 } STATUS deprecated DESCRIPTION "A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure. cvCallGroupRev3 group is superseded by cvCallGroupRev4." ::= { cvdcMIBGroups 24 } cvCallGroupRev4 OBJECT-GROUP OBJECTS { cvCallActiveConnectionId, cvCallActiveTxDuration, cvCallActiveVoiceTxDuration, cvCallActiveFaxTxDuration, cvCallActiveCoderTypeRate, cvCallActiveNoiseLevel, cvCallActiveACOMLevel, cvCallActiveOutSignalLevel, cvCallActiveInSignalLevel, cvCallActiveSessionTarget, cvCallActiveImgPageCount, cvCallActiveCallingName, cvCallActiveCallerIDBlock, cvCallActiveEcanReflectorLocation, cvCallActiveAccountCode, cvCallHistoryConnectionId, cvCallHistoryTxDuration, cvCallHistoryVoiceTxDuration, cvCallHistoryFaxTxDuration, cvCallHistoryCoderTypeRate, cvCallHistoryNoiseLevel, cvCallHistoryACOMLevel, cvCallHistorySessionTarget, cvCallHistoryImgPageCount, cvCallHistoryCallingName, cvCallHistoryCallerIDBlock, cvCallHistoryAccountCode, cvCallActiveERLLevelRev1 } STATUS deprecated DESCRIPTION "A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure. cvCallGroupRev4 group is superseded by cvCallGroupRev5." ::= { cvdcMIBGroups 25 } cvVoIPCallGroupRev5 OBJECT-GROUP OBJECTS { cvVoIPCallActiveConnectionId, cvVoIPCallActiveRoundTripDelay, cvVoIPCallActiveSelectedQoS, cvVoIPCallActiveSessionProtocol, cvVoIPCallActiveSessionTarget, cvVoIPCallActiveOnTimeRvPlayout, cvVoIPCallActiveGapFillWithSilence, cvVoIPCallActiveGapFillWithPrediction, cvVoIPCallActiveGapFillWithInterpolation, cvVoIPCallActiveGapFillWithRedundancy, cvVoIPCallActiveHiWaterPlayoutDelay, cvVoIPCallActiveLoWaterPlayoutDelay, cvVoIPCallActiveReceiveDelay, cvVoIPCallActiveLostPackets, cvVoIPCallActiveLatePackets, cvVoIPCallActiveEarlyPackets, cvVoIPCallActiveUsername, cvVoIPCallActiveProtocolCallId, cvVoIPCallActiveRemSigIPAddrT, cvVoIPCallActiveRemSigIPAddr, cvVoIPCallActiveRemSigPort, cvVoIPCallActiveRemMediaIPAddrT, cvVoIPCallActiveRemMediaIPAddr, cvVoIPCallActiveRemMediaPort, cvVoIPCallActiveSRTPEnable, cvVoIPCallHistoryConnectionId, cvVoIPCallHistoryRoundTripDelay, cvVoIPCallHistorySelectedQoS, cvVoIPCallHistorySessionProtocol, cvVoIPCallHistorySessionTarget, cvVoIPCallHistoryOnTimeRvPlayout, cvVoIPCallHistoryGapFillWithSilence, cvVoIPCallHistoryGapFillWithPrediction, cvVoIPCallHistoryGapFillWithInterpolation, cvVoIPCallHistoryGapFillWithRedundancy, cvVoIPCallHistoryHiWaterPlayoutDelay, cvVoIPCallHistoryLoWaterPlayoutDelay, cvVoIPCallHistoryReceiveDelay, cvVoIPCallHistoryIcpif, cvVoIPCallHistoryLostPackets, cvVoIPCallHistoryLatePackets, cvVoIPCallHistoryEarlyPackets, cvVoIPCallHistoryUsername, cvVoIPCallHistoryProtocolCallId, cvVoIPCallHistoryRemSigIPAddrT, cvVoIPCallHistoryRemSigIPAddr, cvVoIPCallHistoryRemSigPort, cvVoIPCallHistoryRemMediaIPAddrT, cvVoIPCallHistoryRemMediaIPAddr, cvVoIPCallHistoryRemMediaPort, cvVoIPCallHistorySRTPEnable } STATUS deprecated DESCRIPTION "A collection of objects providing the VoIP Call capability. cvVoIPCallGroupRev5 group is superseded by cvVoIPCallGroupRev6." ::= { cvdcMIBGroups 26 } cvCallGroupRev5 OBJECT-GROUP OBJECTS { cvCallActiveDS0s, cvCallActiveDS0sHighThreshold, cvCallActiveDS0sLowThreshold, cvCallActiveDS0sHighNotifyEnable, cvCallActiveDS0sLowNotifyEnable, cvCallActiveConnectionId, cvCallActiveTxDuration, cvCallActiveVoiceTxDuration, cvCallActiveFaxTxDuration, cvCallActiveCoderTypeRate, cvCallActiveNoiseLevel, cvCallActiveACOMLevel, cvCallActiveOutSignalLevel, cvCallActiveInSignalLevel, cvCallActiveSessionTarget, cvCallActiveImgPageCount, cvCallActiveCallingName, cvCallActiveCallerIDBlock, cvCallActiveEcanReflectorLocation, cvCallActiveAccountCode, cvCallHistoryConnectionId, cvCallHistoryTxDuration, cvCallHistoryVoiceTxDuration, cvCallHistoryFaxTxDuration, cvCallHistoryCoderTypeRate, cvCallHistoryNoiseLevel, cvCallHistoryACOMLevel, cvCallHistorySessionTarget, cvCallHistoryImgPageCount, cvCallHistoryCallingName, cvCallHistoryCallerIDBlock, cvCallHistoryAccountCode, cvCallActiveERLLevelRev1 } STATUS current DESCRIPTION "A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM infrastructure." ::= { cvdcMIBGroups 27 } cvdcNotificationGroupRev2 NOTIFICATION-GROUP NOTIFICATIONS { cvdcPoorQoVNotificationRev1, cvdcActiveDS0sHighNotification, cvdcActiveDS0sLowNotification } STATUS deprecated DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB cvdcNotificationGroupRev2 group is superseded by cvdcNotificationGroupRev3." ::= { cvdcMIBGroups 28 } cvVoIPCallGroupRev6 OBJECT-GROUP OBJECTS { cvVoIPCallActiveConnectionId, cvVoIPCallActiveRoundTripDelay, cvVoIPCallActiveSelectedQoS, cvVoIPCallActiveSessionProtocol, cvVoIPCallActiveSessionTarget, cvVoIPCallActiveOnTimeRvPlayout, cvVoIPCallActiveGapFillWithSilence, cvVoIPCallActiveGapFillWithPrediction, cvVoIPCallActiveGapFillWithInterpolation, cvVoIPCallActiveGapFillWithRedundancy, cvVoIPCallActiveHiWaterPlayoutDelay, cvVoIPCallActiveLoWaterPlayoutDelay, cvVoIPCallActiveReceiveDelay, cvVoIPCallActiveLostPackets, cvVoIPCallActiveLatePackets, cvVoIPCallActiveEarlyPackets, cvVoIPCallActiveUsername, cvVoIPCallActiveProtocolCallId, cvVoIPCallActiveRemSigIPAddrT, cvVoIPCallActiveRemSigIPAddr, cvVoIPCallActiveRemSigPort, cvVoIPCallActiveRemMediaIPAddrT, cvVoIPCallActiveRemMediaIPAddr, cvVoIPCallActiveRemMediaPort, cvVoIPCallActiveSRTPEnable, cvVoIPCallHistoryConnectionId, cvVoIPCallHistoryRoundTripDelay, cvVoIPCallHistorySelectedQoS, cvVoIPCallHistorySessionProtocol, cvVoIPCallHistorySessionTarget, cvVoIPCallHistoryOnTimeRvPlayout, cvVoIPCallHistoryGapFillWithSilence, cvVoIPCallHistoryGapFillWithPrediction, cvVoIPCallHistoryGapFillWithInterpolation, cvVoIPCallHistoryGapFillWithRedundancy, cvVoIPCallHistoryHiWaterPlayoutDelay, cvVoIPCallHistoryLoWaterPlayoutDelay, cvVoIPCallHistoryReceiveDelay, cvVoIPCallHistoryIcpif, cvVoIPCallHistoryLostPackets, cvVoIPCallHistoryLatePackets, cvVoIPCallHistoryEarlyPackets, cvVoIPCallHistoryUsername, cvVoIPCallHistoryProtocolCallId, cvVoIPCallHistoryRemSigIPAddrT, cvVoIPCallHistoryRemSigIPAddr, cvVoIPCallHistoryRemSigPort, cvVoIPCallHistoryRemMediaIPAddrT, cvVoIPCallHistoryRemMediaIPAddr, cvVoIPCallHistoryRemMediaPort, cvVoIPCallHistorySRTPEnable, cvVoIPCallHistoryFallbackIcpif, cvVoIPCallHistoryFallbackLoss, cvVoIPCallHistoryFallbackDelay } STATUS current DESCRIPTION "A collection of objects providing the VoIP Call capability." ::= { cvdcMIBGroups 29 } cvdcGeneralCfgGroupRev6 OBJECT-GROUP OBJECTS { cvGeneralPoorQoVNotificationEnable, cvGeneralFallbackNotificationEnable, cvPeerCfgIfIndex, cvPeerCfgType, cvPeerCfgRowStatus, cvPeerCfgPeerType, cvPeerCommonCfgIncomingDnisDigits, cvPeerCommonCfgMaxConnections, cvPeerCommonCfgApplicationName, cvPeerCommonCfgPreference, cvPeerCommonCfgHuntStop, cvPeerCommonCfgDnisMappingName, cvPeerCommonCfgSourceCarrierId, cvPeerCommonCfgTargetCarrierId, cvPeerCommonCfgSourceTrunkGrpLabel, cvPeerCommonCfgTargetTrunkGrpLabel, cvGeneralDSCPPolicyNotificationEnable, cvGeneralMediaPolicyNotificationEnable } STATUS current DESCRIPTION "A collection of objects providing the general Voice Gateway Call Dial Control configuration capability." ::= { cvdcMIBGroups 30 } cvdcNotificationGroupRev3 NOTIFICATION-GROUP NOTIFICATIONS { cvdcPoorQoVNotificationRev1, cvdcActiveDS0sHighNotification, cvdcActiveDS0sLowNotification, cvdcFallbackNotification } STATUS deprecated DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB. This group cvdcNotificationGroupRev3 is deprecated and replaced by cvdcNotificationGroupRev4. cvdcNotificationGroupRev3 group is superseded by cvdcNotificationGroupRev4." ::= { cvdcMIBGroups 31 } cvdcVoIPCfgAmrNbGroup OBJECT-GROUP OBJECTS { cvVoIPPeerCfgOctetAligned, cvVoIPPeerCfgBitRates, cvVoIPPeerCfgCRC } STATUS current DESCRIPTION "A collection of objects providing the VoIP Dial Control configuration capability for GSM AMR-NB codec." ::= { cvdcMIBGroups 32 } cvVoIPCallAmrNbGroup OBJECT-GROUP OBJECTS { cvVoIPCallActiveOctetAligned, cvVoIPCallActiveBitRates, cvVoIPCallActiveModeChgPeriod, cvVoIPCallActiveModeChgNeighbor, cvVoIPCallActiveMaxPtime, cvVoIPCallActiveCRC, cvVoIPCallActiveRobustSorting, cvVoIPCallActiveEncap, cvVoIPCallActiveInterleaving, cvVoIPCallActivePtime, cvVoIPCallActiveChannels, cvVoIPCallHistoryOctetAligned, cvVoIPCallHistoryBitRates, cvVoIPCallHistoryModeChgPeriod, cvVoIPCallHistoryModeChgNeighbor, cvVoIPCallHistoryMaxPtime, cvVoIPCallHistoryCRC, cvVoIPCallHistoryRobustSorting, cvVoIPCallHistoryEncap, cvVoIPCallHistoryInterleaving, cvVoIPCallHistoryPtime, cvVoIPCallHistoryChannels } STATUS current DESCRIPTION "A collection of objects providing GSM AMR-NB codec related information." ::= { cvdcMIBGroups 33 } cvdcVoIPCfgIlbcGroup OBJECT-GROUP OBJECTS { cvVoIPPeerCfgCoderMode } STATUS current DESCRIPTION "A collection of objects providing the VoIP Dial Control configuration capability for iLBC codec." ::= { cvdcMIBGroups 34 } cvVoIPCallIlbcGroup OBJECT-GROUP OBJECTS { cvVoIPCallActiveCoderMode, cvVoIPCallHistoryCoderMode } STATUS current DESCRIPTION "A collection of objects providing iLBC codec related information." ::= { cvdcMIBGroups 35 } cvCallGroupSup1 OBJECT-GROUP OBJECTS { cvCallActiveCallId, cvCallHistoryCallId } STATUS current DESCRIPTION "This group supplements cvCallGroup to provide the call identifier for the telephony leg of the gateway call." ::= { cvdcMIBGroups 36 } cvVoIPCallGroupSup1 OBJECT-GROUP OBJECTS { cvVoIPCallActiveCallId, cvVoIPCallHistoryCallId, cvVoIPCallActiveCallReferenceId, cvVoIPCallHistoryCallReferenceId } STATUS deprecated DESCRIPTION "This group supplements cvVoIPCallGroup to provide the call identifier for the VoIP leg of the gateway call. The group cvVoIPCallGroupSup1 is deprecated and replaced by cvVoIPCallGroupSup2." ::= { cvdcMIBGroups 37 } cvCallVolumeGroup OBJECT-GROUP OBJECTS { cvCallVolConnActiveConnection, cvCallVolConnTotalActiveConnections, cvCallVolConnMaxCallConnectionLicenese, cvCallVolPeerIncomingCalls, cvCallVolPeerOutgoingCalls, cvCallVolMediaIncomingCalls, cvCallVolMediaOutgoingCalls } STATUS current DESCRIPTION "This group provides the information about the call-volume in the voice gateway." ::= { cvdcMIBGroups 38 } cvCallRateMonitorGroup OBJECT-GROUP OBJECTS { cvCallRateMonitorEnable, cvCallRateMonitorTime, cvCallRate, cvCallRateHiWaterMark } STATUS current DESCRIPTION "This group represents the objects used to monitor the call-rate." ::= { cvdcMIBGroups 39 } cvdcVoIPCfgISACGroup OBJECT-GROUP OBJECTS { cvVoIPPeerCfgCodingMode, cvVoIPPeerCfgBitRate, cvVoIPPeerCfgFrameSize } STATUS current DESCRIPTION "A collection of objects providing iSAC codec related information." ::= { cvdcMIBGroups 40 } cvdcNotificationGroupRev4 NOTIFICATION-GROUP NOTIFICATIONS { cvdcPoorQoVNotificationRev1, cvdcActiveDS0sHighNotification, cvdcActiveDS0sLowNotification, cvdcFallbackNotification, cvdcPolicyViolationNotification } STATUS current DESCRIPTION "The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB." ::= { cvdcMIBGroups 41 } cvVoIPCallGroupSup2 OBJECT-GROUP OBJECTS { cvVoIPCallActiveReversedDirectionPeerAddress, ccVoIPCallActivePolicyName, cvVoIPCallActiveCallId, cvVoIPCallActiveCallReferenceId, cvVoIPCallHistoryCallId, cvVoIPCallHistoryCallReferenceId } STATUS deprecated DESCRIPTION "This group supplements cvVoIPCallGroup to provide the call identifier and policy for the VoIP leg of the gateway call. cvVoIPCallGroupSup2 group is superseded by cvVoIPCallGroupSup3." ::= { cvdcMIBGroups 42 } cvVoIPCallGroupSup3 OBJECT-GROUP OBJECTS { cvVoIPCallActiveReversedDirectionPeerAddress, ccVoIPCallActivePolicyName, cvVoIPCallActiveCallId, cvVoIPCallActiveCallReferenceId, cvVoIPCallActiveSessionId, cvVoIPCallHistoryCallId, cvVoIPCallHistoryCallReferenceId, cvVoIPCallHistorySessionId } STATUS current DESCRIPTION "This group supplements cvVoIPCallGroup to identify the VoIP leg of the gateway call." ::= { cvdcMIBGroups 43 } cvdcCallVolumeStatsHistory OBJECT-GROUP OBJECTS { cvCallRateStatsMaxVal, cvCallRateStatsAvgVal, cvCallLegRateStatsMaxVal, cvCallLegRateStatsAvgVal, cvActiveCallStatsMaxVal, cvActiveCallStatsAvgVal, cvCallDurationStatsMaxVal, cvCallDurationStatsAvgVal, cvSipMsgRateStatsMaxVal, cvSipMsgRateStatsAvgVal, cvCallRateWMValue, cvCallRateWMts, cvActiveCallWMValue, cvActiveCallWMts, cvSipMsgRateWMValue, cvSipMsgRateWMts, cvCallDurationStatsThreshold, cvCallVolumeWMTableSize, cvCallLegRateWMValue, cvCallLegRateWMts } STATUS current DESCRIPTION "This group provides the information about the Call Volume Stats History information in the voice gateway." ::= { cvdcMIBGroups 44 } END