CISCOSB-ERRDISABLE-RECOVERY-MIB DEFINITIONS ::= BEGIN

-- Title:      CISCOSB ERRDISABLE Recovery Configuration
-- Version:    7.45.00.00
-- Date:       24-Oct-2007
--

IMPORTS
    TruthValue,TEXTUAL-CONVENTION,
    RowStatus                                            FROM SNMPv2-TC
    MODULE-IDENTITY, OBJECT-TYPE                         FROM SNMPv2-SMI
    ifIndex                                              FROM IF-MIB
    switch001                                            FROM CISCOSB-MIB;

rlErrdisableRecovery  MODULE-IDENTITY
       LAST-UPDATED "200711070001Z"
       ORGANIZATION "Cisco Systems, Inc."

       CONTACT-INFO
       "Postal: 170 West Tasman Drive
       San Jose , CA 95134-1706
       USA

       
       Website:  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

       DESCRIPTION
                "The private MIB module definition for Errdisable Recovery MIB."
       REVISION "200711070000Z"
       DESCRIPTION
                "Initial version of this MIB."
           ::= { switch001 128 }

-------------------------------------------------------------------------------
RlErrdisableRecoveryCauseType::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Errdisable Recovery Cause Type."
    SYNTAX  INTEGER {
        loopback-detection(1),
        port-security(2),
        dot1x-src-address(3),
        acl-deny(4),
        stp-bpdu-guard(5),
        stp-loopback-guard(6),
        pcb-overheat(7),
        udld(8),
        storm-control(9),
        link-flapping(10)
    }


-------------------------------------------------------------------------------

rlErrdisableRecoveryInterval OBJECT-TYPE
    SYNTAX      INTEGER(30..86400)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timeout interval in seconds for automatic activation of an interface after shutdown."
    ::= { rlErrdisableRecovery 1 }

-----------------------------------------------------------------------
rlErrdisableRecoveryCauseTable OBJECT-TYPE
   SYNTAX  SEQUENCE OF RlErrdisableRecoveryCauseEntry
    MAX-ACCESS   not-accessible
    STATUS   current
    DESCRIPTION
       "The table is used to enable or disable auto-recovery for specific
       application causes port suspend. The table includes entries for all applications."
    ::=  { rlErrdisableRecovery  2 }

rlErrdisableRecoveryCauseEntry OBJECT-TYPE
    SYNTAX     RlErrdisableRecoveryCauseEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) in the rlErrdisableRecoveryCauseEntry."
    INDEX  { rlErrdisableRecoveryCause }
    ::= { rlErrdisableRecoveryCauseTable 1 }

RlErrdisableRecoveryCauseEntry ::= SEQUENCE {
    rlErrdisableRecoveryCause  RlErrdisableRecoveryCauseType,
    rlErrdisableRecoveryEnable TruthValue
    }

rlErrdisableRecoveryCause OBJECT-TYPE
    SYNTAX  RlErrdisableRecoveryCauseType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Type of recovery cause."
    ::= { rlErrdisableRecoveryCauseEntry 1 }


rlErrdisableRecoveryEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable/Disable automatic recovery."
    ::= { rlErrdisableRecoveryCauseEntry 2 }


-------------------------------------------------------------------------------

rlErrdisableRecoveryIfTable OBJECT-TYPE
   SYNTAX  SEQUENCE OF RlErrdisableRecoveryIfEntry
    MAX-ACCESS   not-accessible
    STATUS   current
    DESCRIPTION
       "The table is used for show the reason of shutdown the port in errdisable state.
       The table includes only suspended interfaces."
    ::= {  rlErrdisableRecovery 3 }

rlErrdisableRecoveryIfEntry OBJECT-TYPE
    SYNTAX     RlErrdisableRecoveryIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) in the rlErrdisableRecoveryIfEntry."
    INDEX  {     ifIndex  }
    ::= { rlErrdisableRecoveryIfTable 1 }

RlErrdisableRecoveryIfEntry::= SEQUENCE {
    rlErrdisableRecoveryIfReason        RlErrdisableRecoveryCauseType,
    rlErrdisableRecoveryIfEnable        TruthValue,
    rlErrdisableRecoveryIfTimeToRecover INTEGER
   }


rlErrdisableRecoveryIfReason OBJECT-TYPE
    SYNTAX      RlErrdisableRecoveryCauseType
    MAX-ACCESS  read-only
    STATUS   current
    DESCRIPTION
        " The reason of shutdown the port in errdisable state."
    ::= { rlErrdisableRecoveryIfEntry 1 }

rlErrdisableRecoveryIfEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable/Disable automatic recovery status."
    ::= { rlErrdisableRecoveryIfEntry 2 }

rlErrdisableRecoveryIfTimeToRecover OBJECT-TYPE
    SYNTAX      INTEGER
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Time in seconds left for automatic activation of an interface after shutdown,
         calculated as (rlErrdisableRecoveryInterval - (port in down state time interval))"
    ::= { rlErrdisableRecoveryIfEntry 3 }

END