CISCOSB-LBD-MIB DEFINITIONS ::= BEGIN

-- Title:      CISCOSB LBD Configuration
-- Version:    7.45.00.00
-- Date:       24-Oct-2007
--

IMPORTS
    TruthValue,TEXTUAL-CONVENTION                        FROM SNMPv2-TC
    MODULE-IDENTITY, OBJECT-TYPE                         FROM SNMPv2-SMI
    ifIndex                                              FROM IF-MIB
    switch001                                            FROM CISCOSB-MIB;



rlLbd  MODULE-IDENTITY
       LAST-UPDATED "200711070001Z"
                       ORGANIZATION "Cisco Systems, Inc."

                       CONTACT-INFO
                       "Postal: 170 West Tasman Drive
                       San Jose , CA 95134-1706
                       USA

                       
                       Website:  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
       DESCRIPTION
                "The private MIB module definition for Loopback Detection MIB."
       REVISION "200711070000Z"
       DESCRIPTION
                "Initial version of this MIB."
           ::= { switch001 127 }


-------------------------------------------------------------------------------
rlLbdEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable/Disable Loopback Detection in the switch."
    ::= { rlLbd 1 }


-------------------------------------------------------------------------------
rlLbdDetectionInterval OBJECT-TYPE
    SYNTAX      INTEGER(5..60)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The time in seconds that should pass between unicast LBD packets."
    ::= { rlLbd 2 }


-------------------------------------------------------------------------------

rlLbdMode OBJECT-TYPE
    SYNTAX  INTEGER {
        source-mac-addr (1),
        base-mac-addr (2),
        broadcast-mac-addr (3),
	predefined-multicast-mac-addr (4),
	user-defined-mac-addr (5)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Loopback detection mode."
    ::= { rlLbd 3 }

-------------------------------------------------------------------------------

rlLbdPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlLbdPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "The table contains Admin configuration and operational status per port."
    ::= { rlLbd 4 }


rlLbdPortEntry OBJECT-TYPE
    SYNTAX      RlLbdPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Each entry represent a port.
             Per port contains LBD Admin configuration (SET) and status (GET),
             LBD Operational status and LBD Vlan configuration (SET) and status (GET)."

    INDEX   { ifIndex }
    ::= { rlLbdPortTable 1 }

RlLbdPortEntry ::= SEQUENCE {
    rlLbdPortAdminStatus            INTEGER,
    rlLbdPortOperStatus             INTEGER
}

rlLbdPortAdminStatus OBJECT-TYPE
    SYNTAX  INTEGER {
                enabled (1),
                disabled (2)
            }
    MAX-ACCESS       read-write
    STATUS           current
    DESCRIPTION
        "Enable/Disable Loopback Detection on port"    
    ::= { rlLbdPortEntry 1 }

rlLbdPortOperStatus OBJECT-TYPE
    SYNTAX  INTEGER {
                inactive (1),
                active (2),
                loopDetected (3)
            }
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
        "Indicates Loopback Detection operational status on port.
         'inactive' means that the port is not working in loop-detected operational state;
         'active' means that the port is Up and working in state of loop-detecting;
         'loop-detected' means that the system has detected loop on the port."
    DEFVAL { inactive }
    ::= { rlLbdPortEntry 2 }


END