CISCOSB-PIM-MIB DEFINITIONS ::= BEGIN -- Title: CISCOSB PIM Private Extension -- Version: 7.60.00.00 -- Date: 19 Sep 2011 IMPORTS switch001 FROM CISCOSB-MIB pimInterfaceEntry, pimInterfaceIfIndex, pimInterfaceIPVersion, pimNeighborIfIndex, pimNeighborAddressType, pimNeighborAddress FROM PIM-STD-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, TimeTicks, Gauge32 FROM SNMPv2-SMI RowStatus, TruthValue, TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB InetAddressType, InetAddressPrefixLength, InetAddress, InetVersion FROM INET-ADDRESS-MIB IANAipRouteProtocol FROM IANA-RTPROTO-MIB; rlPim MODULE-IDENTITY LAST-UPDATED "200809250000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition for PIM MIB." REVISION "200809250000Z" DESCRIPTION "Initial version of this MIB." ::= { switch001 211 } --Common Textual Conventions AdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The desired administrative state of a MIB row." SYNTAX INTEGER { adminStatusUp(1), adminStatusDown(2) } OperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The current operational state of a MIB row. This set of values is used by many Data Connection products written before 2006." SYNTAX INTEGER { operStatusUp(1), -- active operStatusDown(2), -- inactive operStatusGoingUp(3), -- activating operStatusGoingDown(4), -- deactivating operStatusActFailed(5) -- activation failed } Unsigned32NonZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A non-zero Unsigned32." SYNTAX Unsigned32 (1..'FFFFFFFF'h) NumericIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A numeric index value or identifier." SYNTAX Integer32 (1..'7FFFFFFF'h) NumericIndexOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Either a numeric index value or identifier, or the value zero with a special meaning defined by the object description. Do not use this TC for MIB table index objects. Zero is not valid for such objects." SYNTAX Integer32 (0..'7FFFFFFF'h) EntityIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The HAF entity index value identifying a DC software entity. This TC is deprecated. Use NumericIndex for all indexes." SYNTAX Integer32 (1..2147483647) EntityIndexOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The HAF entity index value identifying a DC software entity, or zero which is used to indicate that the entity is not present. This TC is deprecated. Use NumericIndexOrZero for all references to indexes." SYNTAX Integer32 (0..2147483647) StdAccessListListIndexOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An arbitrary index value identifying a standard access list or zero for no access list." SYNTAX Integer32 (0..2147483647) StdAccessListRuleIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An index value identifying a particular rule within a standard access list. Rules are tested in order of increasing rule index." SYNTAX Integer32 (1..2147483647) ExtAccessListListIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An arbitrary index value identifying an extended access list." SYNTAX Integer32 (1..2147483647) ExtAccessListListIndexOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An arbitrary index value identifying an extended access list or zero for no access list." SYNTAX Integer32 (0..2147483647) PimStatsCounter ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The count of the number of events of a particular type that have occurred since the last time either the NMI join was established (caused by activating DC-PIM TIB Manager or DC-PIM Neighbor Manager, or by recovery after NMI join failure/fail-over), or the statistics were explicitly reset by setting the pimNmEntClearStatsCounters object to 'true'. This value can wrap." SYNTAX Unsigned32 NpgOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The current operational state of a MIB row. This set of values has been used by the Data Connection Networking Protocols Group since 2006." SYNTAX INTEGER { operStatusUp(1), -- active operStatusDown(2), -- inactive operStatusGoingUp(3), -- activating operStatusGoingDown(4), -- deactivating operStatusActFailed(5), -- activation failed operStatusFailed(8), -- failed, will recover when -- possible operStatusFailedPerm(10), -- operator intervention required operStatusFailing(11) -- failure in progress } -- -- The PIM Interface Table -- rlPimInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to create and manage the {interface, IP version} pairs for which PIM is enabled." ::= { rlPim 1 } rlPimInterfaceEntry OBJECT-TYPE SYNTAX RlPimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimInterfaceTable." AUGMENTS { pimInterfaceEntry } ::= { rlPimInterfaceTable 1 } RlPimInterfaceEntry ::= SEQUENCE { -- DC additions { rlPimInterfaceAdminStatus AdminStatus, rlPimInterfaceOperStatus NpgOperStatus, rlPimInterfaceStubInterface TruthValue, rlPimInterfaceP2PNoHellos TruthValue, rlPimInterfaceMgmdEntIndex NumericIndexOrZero, rlPimInterfaceNeighborCount Gauge32, rlPimInterfaceStarGStateLimit Unsigned32, rlPimInterfaceStarGStateWarnThold Unsigned32, rlPimInterfaceStarGStateStored Gauge32, rlPimInterfaceSGStateLimit Unsigned32, rlPimInterfaceSGStateWarnThold Unsigned32, rlPimInterfaceSGStateStored Gauge32, rlPimInterfaceNeighborFilter DisplayString, rlPimInterfaceAssertInterval Unsigned32, rlPimInterfaceAssertHoldtime Unsigned32, -- } End DC additions -- DC additions { rlPimInterfaceAsmGrpFilter DisplayString, rlPimInterfaceSsmSrcAndGrpFilter DisplayString -- } End DC additions --rlPimInterfaceStatus RowStatus } -- DC additions { rlPimInterfaceAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state of this interface." DEFVAL { adminStatusUp } ::= { rlPimInterfaceEntry 3 } rlPimInterfaceOperStatus OBJECT-TYPE SYNTAX NpgOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of this interface." ::= { rlPimInterfaceEntry 4 } rlPimInterfaceStubInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this interface is a 'stub interface' with regard to PIM. If this is set to 'true', no PIM packets are sent or processed (if received) on this interface. This should be set to 'true' if there are no other PIM routers on the interface but there may be untrusted hosts on the interface, to prevent the router processing forged PIM messages from those hosts. If there are other PIM routers on this interface, this must be left as 'false'. Changing the value of this object while the interface is operational causes the interface to be deactivated and then reactivated." DEFVAL { false } ::= { rlPimInterfaceEntry 5 } rlPimInterfaceP2PNoHellos OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this interface is a point-to-point interface on which we do not require the neighbor to send PIM-Hello signals. Provided for back-compatibility with some older implementations that do not send Hellos on point-to-point links. Changing the value of this object while the interface is operational causes the interface to be deactivated and then reactivated." DEFVAL { false } ::= { rlPimInterfaceEntry 6 } rlPimInterfaceMgmdEntIndex OBJECT-TYPE SYNTAX NumericIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The HAF entity index of the DC-MGMD (for example, for IPv4 this is DC-IGMP) Router component that owns this interface. Zero is a wildcard value meaning that no DC-MGMD Router component currently owns the interface, and the first DC-MGMD Router component that sends Group Membership information for this interface will take ownership of it." DEFVAL { 0 } ::= { rlPimInterfaceEntry 7 } rlPimInterfaceNeighborCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM neighbors on this interface." ::= { rlPimInterfaceEntry 8 } rlPimInterfaceStarGStateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of groups for which DC-PIM TIB Manager is allowed to store (*,G,I) state specific to this interface. A value of zero means that there is no limit." DEFVAL { 0 } ::= { rlPimInterfaceEntry 9 } rlPimInterfaceStarGStateWarnThold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "DC-PIM TIB Manager logs an exception if the number of groups for which it is storing (*,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold." DEFVAL { 0 } ::= { rlPimInterfaceEntry 10 } rlPimInterfaceStarGStateStored OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of groups for which DC-PIM TIB Manager is storing (*,G,I) state specific to this interface." ::= { rlPimInterfaceEntry 11 } rlPimInterfaceSGStateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of {source, group} pairs for which DC-PIM TIB Manager is allowed to store (S,G,I) state specific to this interface. A value of zero means that there is no limit." DEFVAL { 0 } ::= { rlPimInterfaceEntry 12 } rlPimInterfaceSGStateWarnThold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "DC-PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing (S,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold." DEFVAL { 0 } ::= { rlPimInterfaceEntry 13 } rlPimInterfaceSGStateStored OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of {source, group} pairs for which DC-PIM TIB Manager is storing (S,G,I) state specific to this interface." ::= { rlPimInterfaceEntry 14 } rlPimInterfaceNeighborFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When neighbor filtering is enabled, the local router will process link-local multicast PIM messages received on this interface only if the originator's IP address (that is, the source address in the IP header) is included in the standard access list corresponding to the list name configured for this object. Note that this filter does not apply to unicast PIM messages, even if the originator is directly connected to the local router. So, for example, this filter has no effect on the processing of received Register messages. In other words, the standard access list is a whitelist, and the local router will treat any router excluded from the list as not being a valid PIM neighbor. To filter out all PIM neighbors, either configure this object to be the list name of an 'exclude all' standard access list, or use the rlPimInterfaceStubInterface object." DEFVAL { "" } ::= { rlPimInterfaceEntry 15 } rlPimInterfaceAssertInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which this router sends PIM Assert messages on this interface when it is the assert winner. This object corresponds to the 'Assert_Time' minus the 'Assert_Override_Interval' defined in the PIM-SM specification [I-D.ietf-rlPim-sm-v2-new]. This must be less than rlPimInterfaceAssertHoldtime." DEFVAL { 177 } ::= { rlPimInterfaceEntry 16 } rlPimInterfaceAssertHoldtime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The interval before this router leaves assert loser state on this interface, unless it receives a PIM Assert message that refreshes this state. This object corresponds to the 'Assert_Time' timer value defined in the PIM-SM specification [I-D.ietf-rlPim-sm-v2-new]. Note that configuring different values for this object for different routers on the same interface might lead to incorrect protocol operation." DEFVAL { 180 } ::= { rlPimInterfaceEntry 17 } -- } End DC additions -- DC additions { rlPimInterfaceAsmGrpFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When ASM group filtering is enabled, then for groups in the ASM space the local router will: - process PIM (*,G) Join and (S,G) Join messages received on this interface only if the group address is included in the standard access list corresponding to the list index value configured for this object - only send PIM (*,G) Join and (S,G) Join messages over this interface if the group address is included in the standard access list corresponding to the list index value configured for this object. Local membership requests from the MGMD Router component are not filtered. These should be filtered by the MGMD Router component. In other words, the standard access list is a whitelist of the ASM groups for which DC-PIM is permitted to request or receive traffic over the interface. rlPimInterfaceAsmGrpFilter defaults to an empty string, which indicates that no access list is specified. If the name does not correspond to a valid access list, no group addresses will match the list and therefore all PIM (*,G) Join and PIM (S,G) Join messages will be filtered." DEFVAL { "" } ::= { rlPimInterfaceEntry 18 } rlPimInterfaceSsmSrcAndGrpFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When SSM source and group filtering is enabled, then for groups in the SSM space the local router will - process PIM (S,G) Join messages received on this interface only if the {source, group} pair is included in the extended access list corresponding to the list index value configured for this object - only send PIM (S,G) Join messages over this interface if the {source, group} pair is included in the extended access list corresponding to the list index value configured for this object. In other words, the extended access list is a whitelist of the SSM {source, group} pairs for which DC-PIM is permitted to request or receive traffic over the interface. rlPimInterfaceSsmSrcAndGrpFilter defaults to an empty string, which indicates that no access list is specified. If the name does not correspond to a valid access list, no {source, group} pairs will match the list and therefore all PIM (S,G) Join messages will be filtered." DEFVAL { "" } ::= { rlPimInterfaceEntry 19 } -- } End DC additions -- -- The RL-PIM Interface Statistics Table -- rlPimIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPimIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the statistics for {interface, IP version} pairs for which PIM is enabled. Note that any messages filtered out by rlPimInterfaceNeighborFilter do not contribute to any statistics in this table except for rlPimIfStatsNumFilteredOut." ::= { rlPim 2 } rlPimIfStatsEntry OBJECT-TYPE SYNTAX RlPimIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rlPimIfStatsTable." INDEX { pimInterfaceIfIndex, pimInterfaceIPVersion } ::= { rlPimIfStatsTable 1 } RlPimIfStatsEntry ::= SEQUENCE { rlPimIfStatsNumSentHello PimStatsCounter, rlPimIfStatsNumSentJoinPrune PimStatsCounter, rlPimIfStatsNumSentAssert PimStatsCounter, rlPimIfStatsNumSentBsm PimStatsCounter, rlPimIfStatsNumErrHello PimStatsCounter, rlPimIfStatsNumRecvUnknownNbr PimStatsCounter, rlPimIfStatsNumUnknownHelloOpt PimStatsCounter, rlPimIfStatsNumFilteredOut PimStatsCounter } rlPimIfStatsNumSentHello OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Hello messages that have been sent out this interface." ::= { rlPimIfStatsEntry 1 } rlPimIfStatsNumSentJoinPrune OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Join/Prune messages that have been sent out this interface." ::= { rlPimIfStatsEntry 2 } rlPimIfStatsNumSentAssert OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Assert messages that have been sent out this interface." ::= { rlPimIfStatsEntry 3 } rlPimIfStatsNumSentBsm OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Bootstrap Router messages that have been sent out this interface. DC-PIM always multicasts this type of message." ::= { rlPimIfStatsEntry 4 } rlPimIfStatsNumErrHello OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Hello messages that have been received on this interface that have contained errors." ::= { rlPimIfStatsEntry 5 } rlPimIfStatsNumRecvUnknownNbr OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Join/Prune, Assert and multicast Bootstrap Router messages that have been received on this interface from a neighbor from which we had not previously received a valid PIM Hello message (and for which rlPimInterfaceP2PNoHellos was 'false'). Bootstrap Router messages which are sent to a unicast address are not included in this count." ::= { rlPimIfStatsEntry 6 } rlPimIfStatsNumUnknownHelloOpt OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unknown options that have been received in PIM Hello messages on this interface." ::= { rlPimIfStatsEntry 7 } rlPimIfStatsNumFilteredOut OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link-local multicast PIM messages filtered out by rlPimInterfaceNeighborFilter on this interface." ::= { rlPimIfStatsEntry 8 } -- -- The DC-PIM Neighbor Manager Entity Table -- rlPimNmEntTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPimNmEntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to create and manage DC-PIM Neighbor Manager entities." ::= { rlPim 3 } rlPimNmEntEntry OBJECT-TYPE SYNTAX RlPimNmEntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an instance of the DC-PIM Neighbor Manager entity." INDEX { rlPimNmEntIndex } ::= { rlPimNmEntTable 1 } RlPimNmEntEntry ::= SEQUENCE { rlPimNmEntIndex NumericIndex, rlPimNmEntRowStatus RowStatus, rlPimNmEntAdminStatus AdminStatus, rlPimNmEntOperStatus NpgOperStatus, rlPimNmEntTmEntIndex NumericIndex, rlPimNmEntI3JoinOperStatus NpgOperStatus, rlPimNmEntNmiJoinOperStatus NpgOperStatus, rlPimNmEntSckJoinOperStatus NpgOperStatus, rlPimNmEntClearStatsCounters TruthValue, rlPimNmEntStatsUpTime TimeTicks, rlPimNmEntEnableUnicastMessages TruthValue, rlPimNmEntAcceptUnicastBsms TruthValue, rlPimNmEntCrpAdvFilterIndex StdAccessListListIndexOrZero } rlPimNmEntIndex OBJECT-TYPE SYNTAX NumericIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this rlPimNmEntEntry. This is the HAF entity index passed on the entity create parameters." ::= { rlPimNmEntEntry 1 } rlPimNmEntRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a DC-PIM Neighbor Manager Entity Table entry." ::= { rlPimNmEntEntry 2 } rlPimNmEntAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state of the DC-PIM Neighbor Manager entity." DEFVAL { adminStatusUp } ::= { rlPimNmEntEntry 3 } rlPimNmEntOperStatus OBJECT-TYPE SYNTAX NpgOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the DC-PIM Neighbor Manager entity." ::= { rlPimNmEntEntry 4 } rlPimNmEntTmEntIndex OBJECT-TYPE SYNTAX NumericIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The HAF entity index value of the DC-PIM TIB Manager to join to. Once set, the value of this object cannot be changed." ::= { rlPimNmEntEntry 5 } rlPimNmEntI3JoinOperStatus OBJECT-TYPE SYNTAX NpgOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the I3 join. rlPimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'operStatusDown' unless this object has a value of 'operStatusDown'." ::= { rlPimNmEntEntry 6 } rlPimNmEntNmiJoinOperStatus OBJECT-TYPE SYNTAX NpgOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the NMI join. rlPimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'operStatusDown' unless this object has a value of 'operStatusDown'." ::= { rlPimNmEntEntry 7 } rlPimNmEntSckJoinOperStatus OBJECT-TYPE SYNTAX NpgOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the SCK join. rlPimNmEntOperStatus cannot transition to 'operStatusUp' unless this object has a value of 'operStatusUp', and cannot transition to 'operStatusDown' unless this object has a value of 'operStatusDown'." ::= { rlPimNmEntEntry 8 } rlPimNmEntClearStatsCounters OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Set this object to 'true' to cause DC-PIM Neighbor Manager to reset all its statistics counters (that is, all objects with syntax PimStatsCounter that are either in the rlPimNmEntStatsTable, or in a row of the rlPimIfStatsTable or rlPimNbrStatsTable for an interface for which rlPimInterfaceNmEntIndex equals rlPimNmEntIndex). Reading the value of this object has no meaning." DEFVAL { false } ::= { rlPimNmEntEntry 9 } rlPimNmEntStatsUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the statistics counters were last reset, either by establishing the NMI join (caused by activating DC-PIM TIB Manager or DC-PIM Neighbor Manager, or by recovery after NMI join failure/fail-over) or by setting the rlPimNmEntClearStatsCounters object to 'true'." ::= { rlPimNmEntEntry 10 } rlPimNmEntEnableUnicastMessages OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Set this object to 'true' to enable DC-PIM Neighbor Manager to send and receive unicast PIM messages. This object must only be set to 'false' if the local router will never be an RP for any multicast group, and will never be the DR for any connected source that sends data to any ASM group. Note that this will always be the case if the local router will perform only the SSM subset of PIM-SM." DEFVAL { true } ::= { rlPimNmEntEntry 11 } rlPimNmEntAcceptUnicastBsms OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Set this object to 'true' to enable DC-PIM Neighbor Manager to accept PIM Bootstrap Messages (BSMs) which are sent to DC-PIM as unicast messages. Setting the object to 'false' means that DC-PIM Neighbor Manager ignores received unicast BSMs. The setting of this object has no effect on the ability of DC-PIM to accept BSMs which are multicast. DC-PIM only ever multicasts BSMs; it never sends them as unicast messages. This object can only be set to 'true' if the rlPimNmEntEnableUnicastMessages object is also set to 'true'." DEFVAL { false } ::= { rlPimNmEntEntry 12 } rlPimNmEntCrpAdvFilterIndex OBJECT-TYPE SYNTAX StdAccessListListIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Set this object to zero to disable Candidate-RP Advertisement filtering. This means that the local router will process a Candidate-RP Advertisement message from any source IP address. Set this object to a non-zero value to enable Candidate-RP Advertisement filtering. The value gives the standard access list index used to filter received Candidate-RP Advertisement messages. The local router will process a received Candidate-RP Advertisement message only if its source IP address is included in the specified standard access list. In other words, the standard access list is a whitelist of the unicast sources from which DC-PIM is permitted to accept Candidate-RP advertisements." DEFVAL { 0 } ::= { rlPimNmEntEntry 13 } -- -- The DC-PIM Neighbor Manager Entity Statistics Table -- rlPimNmEntStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPimNmEntStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the statistics for DC-PIM Neighbor Manager entities. Note that any messages filtered out by rlPimInterfaceNeighborFilter do not contribute to any statistics in this table. Note that in the case of critical parsing errors, only the first error encountered will be counted. The checks are made in the following order. - Length. - Checksum. - Message type. - Version." ::= { rlPim 4 } rlPimNmEntStatsEntry OBJECT-TYPE SYNTAX RlPimNmEntStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the statistics for a DC-PIM Neighbor Manager entity." -- AUGMENTS { rlPimNmEntEntry } INDEX { rlPimNmEntIndex } ::= { rlPimNmEntStatsTable 1 } RlPimNmEntStatsEntry ::= SEQUENCE { rlPimNmEntStatsNumSentCRPAdvert PimStatsCounter, rlPimNmEntStatsNumSentRegister PimStatsCounter, rlPimNmEntStatsNumSentRegisterStop PimStatsCounter, rlPimNmEntStatsNumRecvCRPAdvert PimStatsCounter, rlPimNmEntStatsNumRecvRegister PimStatsCounter, rlPimNmEntStatsNumRecvRegisterStop PimStatsCounter, rlPimNmEntStatsNumErrCRPAdvert PimStatsCounter, rlPimNmEntStatsNumErrRegister PimStatsCounter, rlPimNmEntStatsNumErrRegisterStop PimStatsCounter, rlPimNmEntStatsNumRecvIgnoredType PimStatsCounter, rlPimNmEntStatsNumRecvUnknownType PimStatsCounter, rlPimNmEntStatsNumRecvUnknownVer PimStatsCounter, rlPimNmEntStatsNumRecvBadChecksum PimStatsCounter, rlPimNmEntStatsNumRecvBadLength PimStatsCounter, rlPimNmEntStatsNumCRPAdvfiltered PimStatsCounter } rlPimNmEntStatsNumSentCRPAdvert OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Candidate-RP-Advertisement messages that have been sent by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 1 } rlPimNmEntStatsNumSentRegister OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Register messages that have been sent by this DC-PIM Neighbor Manager entity. Note that this only includes PIM Register messages forwarded to other members of Anycast-RP sets, and Null-Register messages. It does not include Register-encapsulated data packets sent from the DR to the RP; these are sent by the data plane." ::= { rlPimNmEntStatsEntry 2 } rlPimNmEntStatsNumSentRegisterStop OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Register-Stop messages that have been sent by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 3 } rlPimNmEntStatsNumRecvCRPAdvert OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid PIM Candidate-RP-Advertisement messages that have been received by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 4 } rlPimNmEntStatsNumRecvRegister OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid PIM Register messages that have been received by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 5 } rlPimNmEntStatsNumRecvRegisterStop OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid PIM Register-Stop messages that have been received by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 6 } rlPimNmEntStatsNumErrCRPAdvert OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Candidate-RP-Advertisement messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors." ::= { rlPimNmEntStatsEntry 7 } rlPimNmEntStatsNumErrRegister OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Register messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors." ::= { rlPimNmEntStatsEntry 8 } rlPimNmEntStatsNumErrRegisterStop OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Register-Stop messages that have been received by this DC-PIM Neighbor Manager entity that have contained errors." ::= { rlPimNmEntStatsEntry 9 } rlPimNmEntStatsNumRecvIgnoredType OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM messages with a known but unsupported PIM message type that have been received by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 10 } rlPimNmEntStatsNumRecvUnknownType OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM messages with an unknown PIM message type that have been received by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 11 } rlPimNmEntStatsNumRecvUnknownVer OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM messages with an unknown PIM version that have been received by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 12 } rlPimNmEntStatsNumRecvBadChecksum OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM messages with a incorrect PIM checksum that have been received by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 13 } rlPimNmEntStatsNumRecvBadLength OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM messages with a length too short to contain a common PIM header that have been received by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 14 } rlPimNmEntStatsNumCRPAdvfiltered OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of C-RP-Advertisement messages which have been filtered out by this DC-PIM Neighbor Manager entity." ::= { rlPimNmEntStatsEntry 15 } -- -- The DC-PIM Neighbor Statistics Table -- rlPimNbrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPimNbrStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the statistics for PIM neighbors. Note that if a neighbor's Liveness Timer expires (including on receipt of a PIM Hello message with a zero Holdtime), this event resets all of the statistics in this table. However, if a neighbor's Generation ID value changes, none of the statistics in this table are affected." ::= { rlPim 5 } rlPimNbrStatsEntry OBJECT-TYPE SYNTAX RlPimNbrStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rlPimNbrStatsTable." INDEX { pimNeighborIfIndex, pimNeighborAddressType, pimNeighborAddress } ::= { rlPimNbrStatsTable 1 } RlPimNbrStatsEntry ::= SEQUENCE { rlPimNbrStatsNumRecvHello PimStatsCounter, rlPimNbrStatsNumRecvJoinPrune PimStatsCounter, rlPimNbrStatsNumRecvAssert PimStatsCounter, rlPimNbrStatsNumRecvBSM PimStatsCounter, rlPimNbrStatsNumErrJoinPrune PimStatsCounter, rlPimNbrStatsNumErrAssert PimStatsCounter, rlPimNbrStatsNumErrBSM PimStatsCounter } rlPimNbrStatsNumRecvHello OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid PIM Hello messages that have been received from this neighbor." ::= { rlPimNbrStatsEntry 1 } rlPimNbrStatsNumRecvJoinPrune OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid PIM Join/Prune messages that have been received from this neighbor." ::= { rlPimNbrStatsEntry 2 } rlPimNbrStatsNumRecvAssert OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid PIM Assert messages that have been received from this neighbor." ::= { rlPimNbrStatsEntry 3 } rlPimNbrStatsNumRecvBSM OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid PIM Bootstrap messages that have been received from this neighbor." ::= { rlPimNbrStatsEntry 4 } rlPimNbrStatsNumErrJoinPrune OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Join/Prune messages that have been received from this neighbor that have contained errors. Note that this does not include messages for which the RP in the message differs from the RP known by the local router, nor does it include (*,G) messages received for SSM groups." ::= { rlPimNbrStatsEntry 5 } rlPimNbrStatsNumErrAssert OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Assert messages that have been received from this neighbor that have contained errors." ::= { rlPimNbrStatsEntry 6 } rlPimNbrStatsNumErrBSM OBJECT-TYPE SYNTAX PimStatsCounter MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Bootstrap messages that have been received from this neighbor that have contained errors." ::= { rlPimNbrStatsEntry 7 } -- -- The DC-PIM TIB Manager Entity Table -- rlPimTmEntTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPimTmEntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to create and manage DC-PIM TIB Manager entities." ::= { rlPim 6 } rlPimTmEntEntry OBJECT-TYPE SYNTAX RlPimTmEntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an instance of the DC-PIM TIB Manager entity." INDEX { rlPimTmEntIndex } ::= { rlPimTmEntTable 1 } RlPimTmEntEntry ::= SEQUENCE { rlPimTmEntIndex NumericIndex, rlPimTmEntRowStatus RowStatus, rlPimTmEntAdminStatus AdminStatus, rlPimTmEntOperStatus NpgOperStatus, rlPimTmEntGStateLimit Unsigned32, rlPimTmEntGStateWarnThold Unsigned32, rlPimTmEntGStateStored Gauge32, rlPimTmEntSGStateLimit Unsigned32, rlPimTmEntSGStateWarnThold Unsigned32, rlPimTmEntSGStateStored Gauge32, rlPimTmEntStarGIStateLimit Unsigned32, rlPimTmEntStarGIStateWarnThold Unsigned32, rlPimTmEntStarGIStateStored Gauge32, rlPimTmEntSGIStateLimit Unsigned32, rlPimTmEntSGIStateWarnThold Unsigned32, rlPimTmEntSGIStateStored Gauge32, rlPimTmEntAsmGrpFilter DisplayString, rlPimTmEntSsmSrcAndGrpFilter DisplayString, rlPimTmEntRegSrcAndGrpFilter DisplayString, rlPimTmEntRegSuppressionTime Unsigned32, rlPimTmEntRegProbeTime Unsigned32, rlPimTmEntKeepalivePeriod Unsigned32, -- DC additions { rlPimTmEntSendIfStateChangeTraps TruthValue, rlPimTmEntSupportedAddrType InetAddressType -- } End DC additions } rlPimTmEntIndex OBJECT-TYPE SYNTAX NumericIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this rlPimTmEntEntry. This is the HAF entity index passed on the entity create parameters." ::= { rlPimTmEntEntry 1 } rlPimTmEntRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a DC-PIM TIB Manager Entity Table entry." ::= { rlPimTmEntEntry 2 } rlPimTmEntAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state of the DC-PIM TIB Manager entity." DEFVAL { adminStatusUp } ::= { rlPimTmEntEntry 3 } rlPimTmEntOperStatus OBJECT-TYPE SYNTAX NpgOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the DC-PIM TIB Manager entity." ::= { rlPimTmEntEntry 4 } rlPimTmEntGStateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of groups for which DC-PIM TIB Manager is allowed to store non-interface specific (*,G) and/or (S,G) state. A value of zero means that there is no limit." DEFVAL { 0 } ::= { rlPimTmEntEntry 5 } rlPimTmEntGStateWarnThold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "DC-PIM TIB Manager logs an exception if the number of groups for which it is storing non-interface specific (*,G) and/or (S,G) state exceeds this value. A value of zero means that there is no warning threshold." DEFVAL { 0 } ::= { rlPimTmEntEntry 6 } rlPimTmEntGStateStored OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of groups for which DC-PIM TIB Manager is storing non-interface specific (*,G) and/or (S,G) state." ::= { rlPimTmEntEntry 7 } rlPimTmEntSGStateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of {source, group} pairs for which DC-PIM TIB Manager is allowed to store non-interface specific (S,G) state. A value of zero means that there is no limit." DEFVAL { 0 } ::= { rlPimTmEntEntry 8 } rlPimTmEntSGStateWarnThold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "DC-PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing non-interface specific (S,G) state exceeds this value. A value of zero means that there is no warning threshold." DEFVAL { 0 } ::= { rlPimTmEntEntry 9 } rlPimTmEntSGStateStored OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of {source, group} pairs for which DC-PIM TIB Manager is storing non-interface specific (S,G) state." ::= { rlPimTmEntEntry 10 } rlPimTmEntStarGIStateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of {group, interface} pairs for which DC-PIM TIB Manager is allowed to store (*,G,I) state. A value of zero means that there is no limit." DEFVAL { 0 } ::= { rlPimTmEntEntry 11 } rlPimTmEntStarGIStateWarnThold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "DC-PIM TIB Manager logs an exception if the number of {group, interface} pairs for which it is storing (*,G,I) state exceeds this value. A value of zero means that there is no warning threshold." DEFVAL { 0 } ::= { rlPimTmEntEntry 12 } rlPimTmEntStarGIStateStored OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of {group, interface} pairs for which DC-PIM TIB Manager is storing (*,G,I) state." ::= { rlPimTmEntEntry 13 } rlPimTmEntSGIStateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of {source, group, interface} triplets for which DC-PIM TIB Manager is allowed to store (S,G,I) state. A value of zero means that there is no limit." DEFVAL { 0 } ::= { rlPimTmEntEntry 14 } rlPimTmEntSGIStateWarnThold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "DC-PIM TIB Manager logs an exception if the number of {source, group, interface} triplets for which it is storing (S,G,I) state exceeds this value. A value of zero means that there is no warning threshold." DEFVAL { 0 } ::= { rlPimTmEntEntry 15 } rlPimTmEntSGIStateStored OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of {source, group, interface} triplets for which DC-PIM TIB Manager is storing (S,G,I) state." ::= { rlPimTmEntEntry 16 } rlPimTmEntAsmGrpFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When ASM group filtering is enabled, then for groups in the ASM space, the local router will: - process received PIM (*,G) Join and (S,G) Join messages only if the group address is included in the standard access list corresponding to the list index value configured for this object, and - accept (*,G) and (S,G) local membership requests from the MGMD Router component only if the group address is included in the standard access list corresponding to the list index value configured for this object. In other words, the standard access list is a whitelist of the ASM groups for which DC-PIM is permitted to request traffic. Note that DC-PIM will never Register-encapsulate multicast data packets for groups that are blocked by this filter. See rlPimTmEntRegSrcAndGrpFilter for additional Register message filtering options. rlPimTmEntAsmGrpFilter defaults to an empty string, which indicates that no access list is specified." ::= { rlPimTmEntEntry 17 } rlPimTmEntSsmSrcAndGrpFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When SSM source and group filtering is enabled, then for groups in the SSM space, the local router will: - process received PIM (S,G) Join messages only if the {source, group} pair is included in the extended access list corresponding to the list index value configured for this object, and - accept (S,G) local membership requests from the MGMD Router component only if the {source, group} pair is included in the extended access list corresponding to the list index value configured for this object. In other words, the extended access list is a whitelist of the SSM {source, group} pairs for which DC-PIM is permitted to request traffic. rlPimTmEntSsmSrcAndGrpFilter defaults to an empty string, which indicates that no access list is specified." ::= { rlPimTmEntEntry 18 } rlPimTmEntRegSrcAndGrpFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When Register message filtering by source and group address is enabled then: - for groups for which the local router is the RP, it will process received PIM Register messages as normal only if the {source, group} pair of the encapsulated multicast data packet is included in the extended access list corresponding to the list index value configured for this object; if the {source, group} pair is excluded from the extended access list, the local router will send a Register-Stop message, and - on interfaces on which the local router is the DR, it will encapsulate received multicast data packets and forward them in PIM Register messages only if the {source, group} pair of the multicast data packet is included in the extended access list corresponding to the list index value configured for this object. In other words, the extended access list is a whitelist of the {source, group} pairs for which the local router is permitted to Register-encapsulate/decapsulate multicast data packets. rlPimTmEntRegSrcAndGrpFilter defaults to an empty string, which indicates that no access list is specified." DEFVAL { "" } ::= { rlPimTmEntEntry 19 } rlPimTmEntRegSuppressionTime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The mean value of the randomized interval during which a DR stops Register-encapsulation after receiving a PIM Register-Stop message. This object corresponds to the 'Register_Suppression_Time' defined in the PIM-SM specification [I-D.ietf-dcPim-sm-v2-new]. Note that configuring different values for this object for different routers in the PIM domain might lead to incorrect protocol operation." DEFVAL { 60 } ::= { rlPimTmEntEntry 20 } rlPimTmEntRegProbeTime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time to wait for a PIM Register-Stop message after sending a PIM Null-Register message, before resuming Register-encapsulation at a DR. This object corresponds to the 'Register_Probe_Time' defined in the PIM-SM specification [I-D.ietf-dcPim-sm-v2-new]." DEFVAL { 5 } ::= { rlPimTmEntEntry 21 } rlPimTmEntKeepalivePeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time keep (S,G) state alive in the absence of PIM (S,G) Join messages, (S,G) local membership or (S,G) data packets. This object corresponds to the 'Keepalive_Period' defined in the PIM-SM specification [I-D.ietf-dcPim-sm-v2-new]. Note that this value must also be configured in the MPF stub, as the duration of its Data Flow Liveness timer. Note that configuring different values for this object for different routers in the PIM domain might lead to incorrect protocol operation." DEFVAL { 210 } ::= { rlPimTmEntEntry 22 } -- DC additions { rlPimTmEntSendIfStateChangeTraps OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Setting this object to 'true' means that DC-PIM TIB Manager will send a rlPimInterfaceStateChange trap when an interface's operational state changes." DEFVAL { false } ::= { rlPimTmEntEntry 23 } rlPimTmEntSupportedAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This field indicates the address family type that this entity supports. On routers which support multiple address families, separate DC-PIM-TM and DC-PIM-NM entities must be configured for each family. This configuration can only be updated when the row status of the TM entity is NotInService or the admin status is Down." DEFVAL { ipv4 } ::= { rlPimTmEntEntry 24 } -- } End DC additions rlPimEmbeddedRpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled status of Embedded-RP function for PIM-SM on this system." DEFVAL { true } ::= { rlPim 7 } END