CISCOSB-POLICY-MIB DEFINITIONS ::= BEGIN -- Title: CISCOSB POLICY MIB -- Version: 7.46 -- Date: 04 Jan 2007 -- -- 07-Oct-2003 Added to RlPolicyQosMode service -- 07-Oct-2003 Added rlPolicyRulesDownloadMarker -- 07-Oct-2003 Added rlPolicyDscpVptTable -- 27-Jan-2005 Added cos-dscp to RlPolicyTrustTypes -- 07-Feb-2005 Added rlPolicyFlowClassificationOffsetsGroupUseVPTId and -- rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId To -- rlPolicyFlowClassificationOffsetsTable -- Added rlPolicyClassifierVPTID And -- rlPolicyClassifierEtherTypeID To -- rlPolicyClassifierTable -- Added Vpt and Ethertype support to rlPolicyClassifierAdditionalCriteriaSupported -- 14-Mar-2005 Added rlPolicyPortCfgPortRateLimitStatus,rlPolicyPortCfgCirPortRateLimit -- rlPolicyPortCfgCbsPortRateLimit to rlPolicyPortConfigurationTable -- 14-Apr-2005 Added rlPolicyDefaultForwardingProtocol to rlPolicyDefaultForwardingTable -- 17-Apr-2005 Added rlPolicyDscpToDpTable -- 29-May-2005 Changed default value of rlPolicyClassifierEtherTypeID to 1501 (=minimum etherType value) -- 08-Apr-2006 Added branch rlPolicyStatistics and following tables: -- 20-May-2006 Added branch rlPolicyClassifierUtilization -- 08-May-2006 Added rlPolicyFlowClassificationOffsetsGroupUseInnerVlanId To rlPolicyFlowClassificationOffsetsTable -- Added rlPolicyClassifierInnerVID To rlPolicyClassifierTable -- Added Inner vlan id support to rlPolicyClassifierAdditionalCriteriaSupported -- 05-Jul-2006 Added rlPolicyVlanConfigurationTable -- 18-Sep-2006 Added rlPolicyIsTCAvailable scalar -- 04-Jan-2007 Added the new fields rlPolicyRulesTimeRange1 and rlPolicyRulesTimeRange2 -- Added subnote rlPolicyTimeBasedAcl -- 23-Apr-2007 Added IPv6 ACL support -- 09-Jul-2008 Change range of rlPolicyClassifierEtherTypeID to support virtual -- IPv4 and IPv6 ethertypes (originated from IP/IPv6 ACL rule of -- "permit/deny any any any" and not from ethertype field in MAC ACL) -- 18-Jan-2008 Add rlPolicyClassifierUtilizationRulesNumber to rlPolicyClassifierUtilizationEntry -- 01-Jun-2009 Added the new fields rlPolicyRulesSrcPortRangeStart, rlPolicyRulesSrcPortRangeEnd, -- rlPolicyRulesDestPortRangeStart, rlPolicyRulesDestPortRangeEnd -- 18-Aug-2009 Removed Time Based Tables : code moved to general TimeBasedInfrastrucure -- 19-Jan-2011 Removed 3rd party mentions IMPORTS OBJECT-TYPE, IpAddress, Unsigned32,Counter32, zeroDotZero, MODULE-IDENTITY,Counter64 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, RowStatus, RowPointer, DisplayString FROM SNMPv2-TC InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB diffServClassifierEntry FROM DIFF-SERV-MIB Percents, VlanPriority, switch001 FROM CISCOSB-MIB PortList, VlanId FROM Q-BRIDGE-MIB VlanList1, VlanList2, VlanList3, VlanList4 FROM CISCOSB-BRIDGEMIBOBJECTS-MIB; InterfaceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Interface type." SYNTAX INTEGER { vlan(1), port(2) } StatisticsCntrNumOfBitsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The counter can be of different sizes - 32 bit, 48 bit, 64 bit. Maximum is 64." SYNTAX INTEGER { uint32(32), uint48(48), uint64(64) } StatisticsDPType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Drop preceedence type." SYNTAX INTEGER { green(1), yellow(2), red(3) } StatisticsClearActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Clear action, value for clear scalar." SYNTAX INTEGER { noaction(1), action(2) } StatisticsCntrType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The counter can be of different types, depends on actions adhered to rules that the counter is working on." SYNTAX INTEGER { statisticsCntrTypeSetDSCP(1), statisticsCntrTypeDeny(2) } rlPolicy MODULE-IDENTITY LAST-UPDATED "200606260001Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition generic traffic policy in CISCOSB devices." REVISION "200503140000Z" DESCRIPTION "Initial V2 version of this MIB." REVISION "200502070000Z" DESCRIPTION "Added rlPolicyPortCfgPortRateLimitStatus,rlPolicyPortCfgCirPortRateLimit rlPolicyPortCfgCbsPortRateLimit to rlPolicyPortConfigurationTable" REVISION "200501270000Z" DESCRIPTION "Added rlPolicyFlowClassificationOffsetsGroupUseVPTId and rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId To rlPolicyFlowClassificationOffsetsTable Added rlPolicyClassifierVPTID And rlPolicyClassifierEtherTypeID To rlPolicyClassifierTable Added Vpt and Ethertype support to rlPolicyClassifierAdditionalCriteriaSupported Added rlPolicyFlowClassificationOffsetsGroupUseInnerVlanId To rlPolicyFlowClassificationOffsetsTable Added rlPolicyClassifierInnerVID To rlPolicyClassifierTable Added Inner vlan id support to rlPolicyClassifierAdditionalCriteriaSupported" REVISION "200310070000Z" DESCRIPTION "Added cos-dscp to RlPolicyTrustTypes." REVISION "200309220000Z" DESCRIPTION "Add to RlPolicyQosMode service ,Add rlPolicyRulesDownloadMarker,Added rlPolicyDscpVptTable ." REVISION "200504140000Z" DESCRIPTION "Added rlPolicyDefaultForwardingProtocol to rlPolicyDefaultForwardingTable" REVISION "200504170000Z" DESCRIPTION "Added rlPolicyDscpToDpTable" REVISION "200604080000Z" DESCRIPTION "Added branch rlPolicyStatistics" REVISION "200605200000Z" DESCRIPTION "Added branch rlPolicyClassifierUtilization" REVISION "200606260000Z" DESCRIPTION "Added rlPolicyVlanConfigurationTable" ::= { switch001 59 } RlPolicyGroupType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 3 classifier types for which offset bytes can be specified. For Ip and Ipx, the offsets indicated are relative to the beginning of the L3 data (IP options field is skipped). For the Bridged type, the offsets are relative to L2 (and any 802.1D tag is skipped). A value of notUsed is applied, if the classifier uses one set of offsets for bridge, IP and IPX" SYNTAX INTEGER { bridged(1), routedIp(2), routedIpx(3), notUsed(4) } RlPolicyClassifierDiffservIfType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies port's type to which a classifier is applied. It is only used for the DiffServ mode. For the non-DiffServ mode the normal value may be used." SYNTAX INTEGER { normal(1), allBoundaryPorts(2), allInteriorPorts(3) } RlPolicyTrustTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Configure the port trust state cos - Classifies ingress packets with the packet CoS values. For untagged packets, the port default CoS is used. dscp - Classifies ingress packets with the packet DSCP values. For non-ip tagged packets, the packet CoS value is used with the Cos-to-DSCP table .For non-IP untagged packets, the default port CoS is used with the Cos-to-DSCP table tcp-udp - v750 deprecated. port to dscp - Classifies ingress packets with the packet destination port values. For non-ip tagged packets, the packet CoS value is used with the Cos-to-DSCP table. For non-IP untagged packets, the default port CoS is used with the Cos-to-DSCP table. none - v750 deprecated. 802.1p is disabled for this port and the packet gets best effort queue. cos-dscp- Classifies ingress packets with the packet DSCP values. For non-ip tagged packets, the packet CoS value is used with the Cos-to-Queue table .For non-IP untagged packets, the default port CoS is used with the Cos-to-Queue table " SYNTAX INTEGER { cos(1), dscp(2), --v750 deprecated tcp-udp(3), --v750 deprecatd - implemented by "disable mode" in globalQosMode none(4), cos-dscp(3) } RlPolicyQosMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The user can set the system to operate either in the Basic mode or in the Advanced mode. The setting of the mode applies to all ports in the system. configuring the system to work in the advanced mode, all setting for the basic mode are not in affect. For example, 802.1p is not available when operating in the advanced mode. When changing from basic mode to advanced mode and then back to basic mode, the user assignments in the basic mode are restored. Same for moving from advanced to basic and back again to advanced mode, here again the user assignments are kept. The different modes are mutually exclusive, i.e., only one can be active at a given time. For example, when configuring the system to work in the advanced mode, all setting for the basic mode are not in affect. This means that 802.1p is not available when operating in the advanced mode. When changing between modes (Basic, Advanced, Service, none), some of the user settings are reset to their default values. Specifically: 1. When changing from the advanced mode to any other mode, the CCL definitions are lost. 2. When changing from any mode to any other mode, the interface assignments: associated Policy map, trust mode of the Basic mode, shaper and scheduler settings are lost. 3. When changing from service mode to any other mode, all service mode settings are lost. 4. When changing to service mode, ACL are lost. The user is prompted if he wants to whether to import his active ACLs to the service mode. 5. All other user configurations are kept. When the system is configured to the Basic mode and the user changes the trust mode, the CCL assignment per port and the shaper settings are reset to their default values." SYNTAX INTEGER { disable(1), basic(2), advanced(3) } L4ProtType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "specify to Layer 4 protocol type for which the port number will refer at the rlPolicyTcpUdpPortDscpTable." SYNTAX INTEGER { tcp(1), udp(2) } RlPolicyTimeBasedAclWeekPeriodicList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Bitmap that includes days of week. Each bit in the bitmap associated with corresponding day of the week." SYNTAX BITS { monday(0), tuesday(1), wednesday(2), thursday(3), friday(4), saturday(5), sunday(6) } RlPolicyRulesActionDropType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Action Drop Type." SYNTAX INTEGER { hardDrop(1), softDrop(2) } RlPolicyMarkVlanAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies the mark vlan action type in the class map table. 1 - noMark - No vlan marking 2 - mark - mark vlan tagged. 3 - markNestedVlan - add vlan tag to the packet. " SYNTAX INTEGER { noMark(1), mark(2), markNestedVlan(3) } RlPolicyRedirectAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies the packet redirection options. Redirection is applied only on permitted packets. 1 - disabled - no redirect 2 - trap - trap to local_host (CPU) 3 - redirectToInterface - redirect to a output interface (port, trunk or vlan) 4 - redirectToAllPorts - redirect to all ports, exept the ingress port. 5 - mirror - forward the packet and sent a copy to local_host (CPU) 6 - analyzerPort - forward the packet and sent a copy to egress port. 7 - loopback - redirect the packet the the port it was recieved. 8 - redirectToPortGroup - send to group of ports, defined in rlUserAssignedVidxTable table. 9 - mirror_and_redirectToInterface - send the packet to interface and send a copy to local_host(CPU) 10 -mirror_and_redirectToInterfacesGroup - send the packet to group of ports and send a copy to local_host(CPU) " SYNTAX INTEGER { disabled(1), trap(2), redirectToInterface(3), redirectToAllPorts(4), mirror(5), analyzerPort(6), loopback(7), redirectToPortGroup(8), mirrorAndRedirectToInterface(9), mirrorAndRedirectToInterfacesGroup(10) } rlPolicyMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version, the current version is 14 1 - original version 2 - two new fields rlPolicyActionChangeDscpNonConform rlPolicyActionNewDscpNonConform were added. 3 - added support new policy features QoS modes: basic and advanced support for trusted mode operations mapping tables for trusted ports dscp, tcpUdp, mutation, remarking. 4 - I) added support to service mode. II)DSCP to VPT mapping table III) download marker 5 - Added cos-Dscp to RlPolicyTrustTypes 6 - Added rlPolicyFlowClassificationOffsetsGroupUseVPTId and rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId To rlPolicyFlowClassificationOffsetsTable Added rlPolicyClassifierVPTID And rlPolicyClassifierEtherTypeID To rlPolicyClassifierTable Added Vpt and Ethertype support to rlPolicyClassifierAdditionalCriteriaSupported 7 - Added rlPolicyPortCfgPortRateLimitStatus,rlPolicyPortCfgCirPortRateLimit rlPolicyPortCfgCbsPortRateLimit to rlPolicyPortConfigurationTable 8 - Added rlPolicyDefaultForwardingProtocol to rlPolicyDefaultForwardingTable Added rlPolicyDscpToDpTable 9 - Add statistics 10 - Add classifier utilization 11 -Added rlPolicyFlowClassificationOffsetsGroupUseInnerVlanId To rlPolicyFlowClassificationOffsetsTable Added rlPolicyClassifierInnerVID To rlPolicyClassifierTable Added Inner vlan id support to rlPolicyClassifierAdditionalCriteriaSupported 12 - Added rlPolicyVlanConfigurationTable 13 - Added rlPolicyIsTCAvailable scalar 14 - Added rlPolicyCPUSafeGuardEnable" ::= { rlPolicy 1 } -- Groups: -- rlPolicyClassifier -- rlPolicyRules -- rlPolicyMeterClass -- rlPolicyAction -- rlPolicyServiceClass -- rlPolicyDiffServ -- rlPolicyMapping -- rlPolicyGlobalParams -- rlPolicyMapping -- rlPolicyDefaultForwardingTable -- rlPolicyStatistics -- rlPolicyClassifierUtilization -------------- -- Classifier -- rlPolicyClassifier OBJECT IDENTIFIER ::= { rlPolicy 2 } -- -- Platform parameters variables -- rlPolicyClassifierPlatDependParams OBJECT IDENTIFIER ::= { rlPolicyClassifier 1 } rlPolicyFlowClassificationOffsetsGroupScheme OBJECT-TYPE SYNTAX INTEGER { allOffsetsPermitted(1), singleFlowClassificationOffsetGroupsForIpIpxBridge(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Some platforms allow Policy statements to examine all packet offsets(Opal); other platforms require specification of specific byte offsets for routedIp packets, another set of offsets for routedIpx, a third set for bridge." ::= { rlPolicyClassifierPlatDependParams 1 } rlPolicyNumberOfOffsetsPerFlowClassificationOffsetGroup OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS obsolete DESCRIPTION "For platforms which require an FCOG, indicates the maximum number of byte offsets specifiable for each offset group." ::= { rlPolicyClassifierPlatDependParams 2 } rlPolicyFlowClassificationOffsetGroupMaximumOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum value of a byte offset in a Flow Classification Offset Group. If 0, there is no limit." ::= { rlPolicyClassifierPlatDependParams 3 } rlPolicyNumberOfOffsetsPerOmpcGroup OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "indicates the maximum number of byte offsets specifiable for each Ompc offset group." ::= { rlPolicyClassifierPlatDependParams 4 } rlPolicyOmpcMaximumOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum value of a byte offset in a Ompc Group. If 0, there is no limit." ::= { rlPolicyClassifierPlatDependParams 5 } rlPolicyOMPCPermittedOperators OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "A bit mask indicating which operators are permissable in an OMPC: ---------- |87654321| ---------- 1 - equal operator permitted 2 - not-equal operator permitted 3 - greater-than operator permitted 4 - less-than operator permitted" ::= { rlPolicyClassifierPlatDependParams 6 } rlPolicyMaxOMPCLengthForBiggerSmallerOperation OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximal permissible length of an OMPC using bigger' or 'smaller' condition. If 0, there is no limit." ::= { rlPolicyClassifierPlatDependParams 7 } rlPolicyClassifierAdditionalCriteriaSupported OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "A bit mask indicating which additional Criteria may be supported by the classifier: ---------- |87654321| ---------- 1 - input port supported 2 - output port supported 3 - VLAN ID for bridging supported 4 - VPT ID for bridging supported 5 - EtherType ID for bridging supported 6 - Inner VLAN ID for bridging supported" ::= { rlPolicyClassifierPlatDependParams 8 } rlPolicyClassifierAdditionalCriteriaUsedInOffsetCount OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether the additional FCOG or Classifier criteria (ie. inPort, outPort VID count towards the maximum number of offsets ie. whether using inPort in the FCOG reduces the maximum number of offsets available." ::= { rlPolicyClassifierPlatDependParams 9 } rlPolicyClassifierPermittedOffsetTypes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "A bit mask indicating which offset types are supported by the platform for FCOG and OMPC definitions: ---------- |87654321| ---------- 1 - L2 offsets supported 2 - L3 offsets supported" ::= { rlPolicyClassifierPlatDependParams 10 } rlPolicyClassifierOMPCActions OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "A bit mask indicating which operation could be performed with OPMC ---------- |87654321| ---------- 1 - equal, 2 - notEqual, 3 - bigger, 4 - smaller." ::= { rlPolicyClassifierPlatDependParams 11 } -- --Flow Classification Offsets Table -- rlPolicyFlowClassificationOffsetsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyFlowClassificationOffsetsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the byte offsets that the platform can use for policy decisions. This table is used for platforms which impose limitations on choosing the OMPCs for classification. If the platform does not impose any limitations, the value of rlPolicyFlowClassificationOffsetsGroupScheme is allOffsetsPermitted. Each entry in the table specifies a combination of byte offsets which can be used to specify flow classification. A rule may use a subset of the bytes of its Offset Group. The maximum value for each offset is given by rlPolicyFlowClassificationOffsetGroupMaximumOffset. The maximum number of offsets per Offset Group is given by rlPolicyNumberOfOffsetsPerFlowClassificationOffsetGroup." ::= { rlPolicyClassifier 2 } rlPolicyFlowClassificationOffsetsGroupEntry OBJECT-TYPE SYNTAX RlPolicyFlowClassificationOffsetsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The flow classification offset table entry includes the following parameters" INDEX { rlPolicyFlowClassificationOffsetsGroupType } ::= { rlPolicyFlowClassificationOffsetsTable 1 } RlPolicyFlowClassificationOffsetsGroupEntry ::= SEQUENCE { rlPolicyFlowClassificationOffsetsGroupType RlPolicyGroupType, rlPolicyFlowClassificationOffsetsGroupOffset OBJECT IDENTIFIER, rlPolicyFlowClassificationOffsetsGroupOffsetType OBJECT IDENTIFIER, rlPolicyFlowClassificationOffsetsGroupMask OCTET STRING, rlPolicyFlowClassificationOffsetsGroupUseInputInterface TruthValue, rlPolicyFlowClassificationOffsetsGroupUseOutputInterface TruthValue, rlPolicyFlowClassificationOffsetsGroupUseVlanId TruthValue, rlPolicyFlowClassificationOffsetsGroupStatus RowStatus, rlPolicyFlowClassificationOffsetsGroupUseVPTId TruthValue, rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId TruthValue, rlPolicyFlowClassificationOffsetsGroupUseInnerVlanId TruthValue } rlPolicyFlowClassificationOffsetsGroupType OBJECT-TYPE SYNTAX RlPolicyGroupType MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies a classifier type for which offset bytes can be specified." ::= { rlPolicyFlowClassificationOffsetsGroupEntry 1 } rlPolicyFlowClassificationOffsetsGroupOffset OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "The list of offsets to be included in the Flow Classification Offset Group are specified as subidentifiers in the OID(after the first 2 bytes which must be 1.1). The maximal number of permissible offsets is given by rlPolicyNumberOfOffsetsPerFlowClassificationOffsetGroup. The maximal value that an offset can have is rlPolicyFlowClassificationOffsetGroupMaximumOffset." ::= { rlPolicyFlowClassificationOffsetsGroupEntry 2 } rlPolicyFlowClassificationOffsetsGroupOffsetType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the corresponding byte denotes an offset from beginning of L2, from the beginning of L3 IPv4 packet data or from the beginning of L3 IPv6 packet data. Each byte in the OID contains either: (1) - L2 offset (2) - L3 Offset (3) - L3 IPv6 Offset" ::= { rlPolicyFlowClassificationOffsetsGroupEntry 3 } rlPolicyFlowClassificationOffsetsGroupMask OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The list of masks corresponding to the offsets to be included in the Flow Classification Offset Group are specified as bytes in the OID(after the first 2 bytes which must be 1.1)." ::= { rlPolicyFlowClassificationOffsetsGroupEntry 4 } rlPolicyFlowClassificationOffsetsGroupUseInputInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether or not the Input Interface Index is usable in Policy Rule definitions." ::= { rlPolicyFlowClassificationOffsetsGroupEntry 5 } rlPolicyFlowClassificationOffsetsGroupUseOutputInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether or not the Output Interface Index(ie. routing/bridging decision) is usable in Policy Rule definitions" ::= { rlPolicyFlowClassificationOffsetsGroupEntry 6 } rlPolicyFlowClassificationOffsetsGroupUseVlanId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether or not the VlanId is usable in Policy Rule definitions for bridged packets" ::= { rlPolicyFlowClassificationOffsetsGroupEntry 7 } rlPolicyFlowClassificationOffsetsGroupStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlPolicyFlowClassificationOffsetsGroupEntry 8 } rlPolicyFlowClassificationOffsetsGroupUseVPTId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether or not the VPT is usable in Policy Rule definitions for bridged packets" DEFVAL{ false } ::= { rlPolicyFlowClassificationOffsetsGroupEntry 9 } rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether or not the EtherType is usable in Policy Rule definitions for bridged packets" DEFVAL{ false } ::= { rlPolicyFlowClassificationOffsetsGroupEntry 10 } rlPolicyFlowClassificationOffsetsGroupUseInnerVlanId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether or not the inner VlanId is usable in Policy Rule definitions for bridged packets" DEFVAL{ false } ::= { rlPolicyFlowClassificationOffsetsGroupEntry 11 } -- -- Ompc Table -- rlPolicyOMPCTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyOMPCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OMPC statements." ::= { rlPolicyClassifier 3 } rlPolicyOMPCEntry OBJECT-TYPE SYNTAX RlPolicyOMPCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each classification statement consists of the following parameters" INDEX { rlPolicyOMPCGroupType, rlPolicyOMPCIndex } ::= { rlPolicyOMPCTable 1 } RlPolicyOMPCEntry ::= SEQUENCE { rlPolicyOMPCGroupType RlPolicyGroupType, rlPolicyOMPCIndex INTEGER, rlPolicyOMPCOffset INTEGER, rlPolicyOMPCOffsetType INTEGER, rlPolicyOMPCMask OCTET STRING, rlPolicyOMPCPattern OCTET STRING, rlPolicyOMPCCondition INTEGER, rlPolicyOMPCDescription DisplayString, rlPolicyOMPCStatus RowStatus } rlPolicyOMPCGroupType OBJECT-TYPE SYNTAX RlPolicyGroupType MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies a classifier type for which offset bytes can be specified." ::= { rlPolicyOMPCEntry 1 } rlPolicyOMPCIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the OMPC Table. " ::= { rlPolicyOMPCEntry 2 } rlPolicyOMPCOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the offset within the frame (in bytes) from the layer according to rlPolicyGroupType. The limitation of this field is according to the rlPolicyFlowClassificationOffsetGroupMaximumOffset parameter if this OMPC is used by an entry in the rlPolicyClassifierTable whose rlPolicyClassifierType is a protocol for which predefined offsets in rlPolicyFlowClassificationOffsetsTable are required. rlPolicyRequiredOffsetGroups indicates for which protocols there is such a requirement." ::= { rlPolicyOMPCEntry 3 } rlPolicyOMPCOffsetType OBJECT-TYPE SYNTAX INTEGER { l2(1), l3(2), l3-ipv6(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the offset should be interpreted as relative to the beginning of L2 or the beginning of L3" ::= { rlPolicyOMPCEntry 4 } rlPolicyOMPCMask OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies which bits of the rlPolicyOMPCPattern field are significant for packet comparison. The length of the mask, in case of 'bigger' or 'smaller' rlPolicyOMPCCondition, is limited by rlPolicyMaxOMPCLengthForBiggerSmallerOperation." ::= { rlPolicyOMPCEntry 5 } rlPolicyOMPCPattern OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Describes the mask field. The length of this object must be equal to the length of rlPolicyOMPCMask." ::= { rlPolicyOMPCEntry 6 } rlPolicyOMPCCondition OBJECT-TYPE SYNTAX INTEGER { equal(1), notEqual(2), bigger(3), smaller(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "These define the operation carried out on the two 'operands' (frame and pattern), i.e. Bigger means that frame bits should be bigger than pattern bits. The permitted values are according to rlPolicyOMPCPermittedOperators parameter, if this OMPC is used by an entry in the rlPolicyClassifierTable whose rlPolicyClassifierType is a protocol for which predefined offsets in rlPolicyFlowClassificationOffsetsTable are required. rlPolicyRequiredOffsetGroups indicates for which protocols there is such a requirement." DEFVAL{ equal } ::= { rlPolicyOMPCEntry 7 } rlPolicyOMPCDescription OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Free text specifing the nature of this OMPC." ::= { rlPolicyOMPCEntry 8 } rlPolicyOMPCStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlPolicyOMPCEntry 9 } -- -- Classifier Table -- rlPolicyClassifierTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyClassifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Classifier statement." ::= { rlPolicyClassifier 4 } rlPolicyClassifierEntry OBJECT-TYPE SYNTAX RlPolicyClassifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Classifiers can be of the ingress, egress, or post-routing phase varieties. Each multifield classification statement consists of the following parameters." INDEX { rlPolicyClassifierType, rlPolicyClassifierListIndex, rlPolicyClassifierSubListIndex, rlPolicyClassifierIndex } ::= { rlPolicyClassifierTable 1 } RlPolicyClassifierEntry ::= SEQUENCE { rlPolicyClassifierType RlPolicyGroupType, rlPolicyClassifierListIndex INTEGER, rlPolicyClassifierSubListIndex INTEGER, rlPolicyClassifierIndex INTEGER, rlPolicyClassifierOmpcList OBJECT IDENTIFIER, rlPolicyClassifierInIfIndex InterfaceIndexOrZero, rlPolicyClassifierOutIfIndex InterfaceIndexOrZero, rlPolicyClassifierVID INTEGER, rlPolicyClassifierDiffservInIfType RlPolicyClassifierDiffservIfType, rlPolicyClassifierDiffservOutIfType RlPolicyClassifierDiffservIfType, rlPolicyClassifierStatus RowStatus, rlPolicyClassifierInIfIndexList PortList, rlPolicyClassifierOutIfIndexList PortList, rlPolicyClassifierVPTID INTEGER, rlPolicyClassifierVPTIDMask INTEGER, rlPolicyClassifierEtherTypeID INTEGER, rlPolicyClassifierInnerVID INTEGER } rlPolicyClassifierType OBJECT-TYPE SYNTAX RlPolicyGroupType MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies a classifier type for which offset bytes can be specified." ::= { rlPolicyClassifierEntry 1 } rlPolicyClassifierListIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "List Index into the Classifier Table." ::= { rlPolicyClassifierEntry 2 } rlPolicyClassifierSubListIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "SubList Index into the Classifier Table." ::= { rlPolicyClassifierEntry 3 } rlPolicyClassifierIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the Classifier Table." ::= { rlPolicyClassifierEntry 4 } rlPolicyClassifierOmpcList OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "The list of OMPCs to check with this Classifier. Each subidentifier together with rlPolicyClassifierType specify one OMPC." ::= { rlPolicyClassifierEntry 5 } rlPolicyClassifierInIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Input interface index to be compared with received packet, a value of 0 denotes that the classifier is applied to all ports." DEFVAL{ 0 } ::= { rlPolicyClassifierEntry 6 } rlPolicyClassifierOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Output interface index to be compared with sent packet, a value of 0 denotes that the classifier is applied to all ports." DEFVAL { 0 } ::= { rlPolicyClassifierEntry 7 } rlPolicyClassifierVID OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID, used only for bridged traffic. " DEFVAL{ 0 } ::= { rlPolicyClassifierEntry 8 } rlPolicyClassifierDiffservInIfType OBJECT-TYPE SYNTAX RlPolicyClassifierDiffservIfType MAX-ACCESS read-write STATUS current DESCRIPTION "For a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to all Diffserv boundary ports or all Diffserv Interior ports. If normal is specified, the rlPolicyClassifierInIfIndex field is used as it is in the non-diffserv case. If allBoundary or allInterior is selected, rlPolicyClassifierInIfIndex is ignored" DEFVAL { normal } ::= { rlPolicyClassifierEntry 9 } rlPolicyClassifierDiffservOutIfType OBJECT-TYPE SYNTAX RlPolicyClassifierDiffservIfType MAX-ACCESS read-write STATUS current DESCRIPTION "For a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to outbound traffic on all Diffserv boundary ports or all Diffserv Interior ports. If normal is specified, the rlPolicyClassifierOutIfIndex field is used as it is in the non-diffserv case. If allBoundary or allInterior is selected, rlPolicyClassifierOutIfIndex is ignored" DEFVAL { normal } ::= { rlPolicyClassifierEntry 10 } rlPolicyClassifierStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlPolicyClassifierEntry 11 } rlPolicyClassifierInIfIndexList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "allow to define list of ports for the specific classifier for ingress classification. if rlPolicyClassifierInIfIndex equal to zero then the following list should be reffered , if the list is empty we refer to ALL Ports" ::= { rlPolicyClassifierEntry 12 } rlPolicyClassifierOutIfIndexList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "allow to define list of ports for the specific classifier for egress classification. if rlPolicyClassifierOutIfIndex equal to zero then the following list should be reffered , if the list is empty we refer to ALL Ports" ::= { rlPolicyClassifierEntry 13 } rlPolicyClassifierVPTID OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "VPT ID - user priority tag to be compared with . 8 is used to indicate not used value for this classifier" DEFVAL{ 8 } ::= { rlPolicyClassifierEntry 14 } rlPolicyClassifierVPTIDMask OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VPT ID Mask ,mask the user priority field . 0 is the default indicate Mask all compared with any VPT value" DEFVAL{ 0 } ::= { rlPolicyClassifierEntry 15 } rlPolicyClassifierEtherTypeID OBJECT-TYPE SYNTAX INTEGER (1499..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "EtherType ID, to be compared with. 65535 is used to indicate not used value for this classifier 1499 is uded to indicate IPv4 ethertype that is originated from IPv4 ACL with permit/deny any any any 1500 is uded to indicate IPv6 ethertype that is originated from IPv6 ACL with permit/deny any any any" DEFVAL{ 65536 } ::= { rlPolicyClassifierEntry 16} rlPolicyClassifierInnerVID OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "INNER VLAN ID, used only for double tagged traffic. " DEFVAL{ 0 } ::= { rlPolicyClassifierEntry 17 } ---------------------------- -- Rules Class -- rlPolicyRules OBJECT IDENTIFIER ::= { rlPolicy 3 } rlPolicyRulesPlatDependParams OBJECT IDENTIFIER ::= { rlPolicyRules 1 } rlPolicyDroppedPacketCountSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the dropped packets counter in the rlPolicyRulesTable is supported." ::= { rlPolicyRulesPlatDependParams 1 } rlPolicyFilterActionOptions OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "A bit mask indicating which operation could be perform ---------- |87654321| ---------- 1 - block, 2 - blockAndTrap, 3 - permitAndTrap, 4 - permit." ::= { rlPolicyRulesPlatDependParams 2 } rlPolicyIngressMeteringSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether the platform supports metering in inbound packet rules." ::= { rlPolicyRulesPlatDependParams 3 } rlPolicyEgressMeteringSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether the platform supports metering on outbound packet rules (for Diffserv)." ::= { rlPolicyRulesPlatDependParams 4 } -------------- -- Rules Table -- rlPolicyRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of rules and Rules statements applied to all incoming traffic at the post-routing phase - ie. both the inPort and outPort are available for classification When Diffserv is not in effect(ie. IPX, bridging, or IP when the global option for Diffserv is off), certain table parameters are not available(see below). The DiffServ option is enabled or disabled by setting rlDiffservModeEnabled." ::= { rlPolicyRules 2 } rlPolicyRulesEntry OBJECT-TYPE SYNTAX RlPolicyRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each multifield classification statement consists of the following parameters." INDEX { rlPolicyRulesTableType, rlPolicyRulesInterfaceDirection, rlPolicyRulesListIndex, rlPolicyRulesSubListIndex, rlPolicyRulesIndex } ::= { rlPolicyRulesTable 1 } RlPolicyRulesEntry ::= SEQUENCE { rlPolicyRulesTableType RlPolicyGroupType, rlPolicyRulesInterfaceDirection INTEGER, rlPolicyRulesListIndex INTEGER, rlPolicyRulesSubListIndex INTEGER, rlPolicyRulesIndex INTEGER, rlPolicyRulesFilteringAction INTEGER, rlPolicyRulesDroppedPackets Counter32, rlPolicyRulesFurtherRefPointer INTEGER, rlPolicyRulesDescription DisplayString, rlPolicyRulesStatus RowStatus, rlPolicyRulesCounterIdx INTEGER, rlPolicyRulesCounter Counter32, rlPolicyRulesActionPointer INTEGER, rlPolicyRulesTimeRange1 INTEGER, rlPolicyRulesTimeRange2 INTEGER, rlPolicyRulesSrcPortRangeStart INTEGER, rlPolicyRulesSrcPortRangeEnd INTEGER, rlPolicyRulesDestPortRangeStart INTEGER, rlPolicyRulesDestPortRangeEnd INTEGER, rlPolicyRulesActionDropType RlPolicyRulesActionDropType } rlPolicyRulesTableType OBJECT-TYPE SYNTAX RlPolicyGroupType MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies a classifier type for which offset bytes can be specified." ::= { rlPolicyRulesEntry 1 } rlPolicyRulesInterfaceDirection OBJECT-TYPE SYNTAX INTEGER { inbound(1), -- ingress interface / ingress metering support outbound(2), -- egress interface / egress metering support none(3) -- no Metering support } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the direction for this entry on the interface. 'inbound' traffic is operated on during receipt, while 'outbound' traffic is operated on prior to transmission. Based on the metering support: inbound available while the ingress metering supported, outbound available while egress metering supported, and none while no metering supported." ::= { rlPolicyRulesEntry 2 } rlPolicyRulesListIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerates the rule list entry." ::= { rlPolicyRulesEntry 3 } rlPolicyRulesSubListIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerates the rule sub-list entry." ::= { rlPolicyRulesEntry 4 } rlPolicyRulesIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerates the rule index entry." ::= { rlPolicyRulesEntry 5 } rlPolicyRulesFilteringAction OBJECT-TYPE SYNTAX INTEGER { block(1), blockAndTrap(2), permitAndTrap(3), permit(4), blockAndDisablePort(5), blockTrapAndDisablePort(6), blockAndLogInput(7), permitAndLogInput(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the action for the filter. Values 1-10 reserved for the System filtering implemetation; Values starting from 11 may be used for user definition about future application." DEFVAL { permit } ::= { rlPolicyRulesEntry 6} rlPolicyRulesDroppedPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets blocked by this filtering rule." ::= { rlPolicyRulesEntry 7 } rlPolicyRulesFurtherRefPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This further reference indicate on the entry at the metering or action table, based on the supported features. The rlPolicyRulesFurtherRefPointer points on the metering table if the metering feature is supported, if not this fields points on the Action table" ::= { rlPolicyRulesEntry 8 } rlPolicyRulesDescription OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Free text specifing the nature of this Rule." ::= { rlPolicyRulesEntry 9 } rlPolicyRulesStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status of the Rules entry." ::= { rlPolicyRulesEntry 10 } rlPolicyRulesCounterIdx OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "If not zero, perform counting of matched packets ." DEFVAL { 0 } ::= { rlPolicyRulesEntry 11 } rlPolicyRulesCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that matched this filtering rule." ::= { rlPolicyRulesEntry 12 } rlPolicyRulesActionPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This further reference indicate on the entry at the action table, The rlPolicyRulesActionPointer points on the action table if the aggregate metering feature is supported,or if meter is not belong to data path. " ::= { rlPolicyRulesEntry 13 } rlPolicyRulesTimeRange1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Time range of the first ACL. " DEFVAL { 0 } ::= { rlPolicyRulesEntry 14 } rlPolicyRulesTimeRange2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Time range of the second ACL. " DEFVAL { 0 } ::= { rlPolicyRulesEntry 15 } rlPolicyRulesSrcPortRangeStart OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Start port of port range for source port. " DEFVAL { 0 } ::= { rlPolicyRulesEntry 16 } rlPolicyRulesSrcPortRangeEnd OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "End port of port range for source port. " DEFVAL { 0 } ::= { rlPolicyRulesEntry 17 } rlPolicyRulesDestPortRangeStart OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Start port of port range for destination port. " DEFVAL { 0 } ::= { rlPolicyRulesEntry 18 } rlPolicyRulesDestPortRangeEnd OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "End port of port range for destination port. " DEFVAL { 0 } ::= { rlPolicyRulesEntry 19 } rlPolicyRulesActionDropType OBJECT-TYPE SYNTAX RlPolicyRulesActionDropType MAX-ACCESS read-write STATUS current DESCRIPTION "This field is valid only if rlPolicyRulesFilteringAction is not permit. Used to distinguish between Hard and Soft drop." DEFVAL { hardDrop } ::= { rlPolicyRulesEntry 20 } ------------------------ -- Rules download marker -- rlPolicyRulesDownloadMarker OBJECT-TYPE SYNTAX INTEGER { start(1), finish(2), finishCombined(3), undo(4), deleteStart(5), deleteFinish(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates when rules download or removing starts and terminates." ::= { rlPolicyRules 3 } ------------------ -- Metering Class -- rlPolicyMeterClass OBJECT IDENTIFIER ::= { rlPolicy 4 } rlPolicyMeterPlatDependParams OBJECT IDENTIFIER ::= { rlPolicyMeterClass 1 } rlPolicyMeterDepth OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many meters can be chained in succession (ie. so that if the first meter fails, the second can be examined). The final meter in a sequence is always 'always-conform', so if the value of this parameter is 2, the platform that supports a single meter and then a second marking/action for meter failure." ::= { rlPolicyMeterPlatDependParams 1 } ------------ -- Metering Class Table -- rlPolicyMeterClassTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyMeteringClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the Metering classes for the system." ::= { rlPolicyMeterClass 2 } rlPolicyMeteringClassEntry OBJECT-TYPE SYNTAX RlPolicyMeteringClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each statement consists of the following parameters" INDEX { rlPolicyMeteringClassIndex } ::= { rlPolicyMeterClassTable 1 } RlPolicyMeteringClassEntry ::= SEQUENCE { rlPolicyMeteringClassIndex INTEGER, rlPolicyMeteringClassAlwaysConform TruthValue, rlPolicyMeteringClassAggregateMeterRate INTEGER, rlPolicyMeteringClassAggregateMeterBurstSize INTEGER, rlPolicyMeteringClassPerSessionMeteringRate INTEGER, rlPolicyMeteringClassMaxSessionLimit INTEGER, rlPolicyMeteringClassActionPointer INTEGER, rlPolicyMeteringClassFailMeterPointer INTEGER, rlPolicyMeteringClassStatus RowStatus, rlPolicyMeteringCounterEnable TruthValue, rlPolicyMeteringClassInProfileCounter Counter32, rlPolicyMeteringClassOutProfileCounter Counter32 } rlPolicyMeteringClassIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This enumerates the table entry." ::= { rlPolicyMeteringClassEntry 1 } rlPolicyMeteringClassAlwaysConform OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the meter always accepts all traffic; its rate is effectively infinite. In such a case, the token bucket defined by the MeterRate and Burst-Size parameters is ignored. also used when there isn't metering support." DEFVAL { true } ::= { rlPolicyMeteringClassEntry 2 } rlPolicyMeteringClassAggregateMeterRate OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The rate in kilobytes/second of traffic considered within the bandwidth allocated for this policy entry." DEFVAL { 0 } ::= { rlPolicyMeteringClassEntry 3 } rlPolicyMeteringClassAggregateMeterBurstSize OBJECT-TYPE SYNTAX INTEGER UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate)." DEFVAL { 0 } ::= { rlPolicyMeteringClassEntry 4 } rlPolicyMeteringClassPerSessionMeteringRate OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "A Quantitative Appliction policy rule where each individual session requires a guaranteed minimum bandwidth. Specifies the Ingress traffic flow meter per session indicate a bandwidth limit to be applied to each individual session Value 0 at rlPolicyMeteringClassPerSessionMetering and rlPolicyMeteringClassMaxSessionLimit is interpreted to mean no sepecific requarment and the aggregate metering will be done by the system decision. The rate in kilobytes/second" DEFVAL { 0 } ::= { rlPolicyMeteringClassEntry 5 } rlPolicyMeteringClassMaxSessionLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "indicate a the maximum number of session for a sepecific rule to guarante minimum bandwidth. Value 0 at rlPolicyMeteringClassPerSessionMetering and rlPolicyMeteringClassMaxSessionLimit is interpreted to mean no sepecific requarment and the aggregate metering will be done by the system decision." DEFVAL { 0 } ::= { rlPolicyMeteringClassEntry 6 } rlPolicyMeteringClassActionPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the index in the rlPolicyActionTable to be accessed for packets that are in-profile. Value 0 is interpreted to mean no action. A non-zero value may be specified only for RoutedIp packets in Diffserv mode." ::= { rlPolicyMeteringClassEntry 7 } rlPolicyMeteringClassFailMeterPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies an index in the rlPolicyMeterClassTable. This is the meter that is to be used if the packet is out-of-profile relative to the current meter. If non-Diffserv mode, this field is not used. If the current meter is AlwaysConform, this field is not used." DEFVAL { 0 } ::= { rlPolicyMeteringClassEntry 8 } rlPolicyMeteringClassStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlPolicyMeteringClassEntry 9 } rlPolicyMeteringCounterEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable metering counter for the meter entry." DEFVAL { false } ::= { rlPolicyMeteringClassEntry 10 } rlPolicyMeteringClassInProfileCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "meter counter for packets that are in profile ." ::= { rlPolicyMeteringClassEntry 11 } rlPolicyMeteringClassOutProfileCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "meter counter for packets that are out of profile" ::= { rlPolicyMeteringClassEntry 12 } ------------ -- Action --- rlPolicyAction OBJECT IDENTIFIER ::= { rlPolicy 5 } rlPolicyActionPlatDependParams OBJECT IDENTIFIER ::= { rlPolicyAction 1 } rlPolicyActionMREDSupported OBJECT-TYPE SYNTAX INTEGER { supported(1), notSupported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the platform supports setting MRED characteristics in the packet action" ::= { rlPolicyActionPlatDependParams 1 } rlPolicyActionDroppedPacketCountSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the platform can maintain a count of packets Marked for drop by a particular action." ::= { rlPolicyActionPlatDependParams 2 } rlPolicyActionDroppedDropPrecedenceSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the platform support at drop precedence." ::= { rlPolicyActionPlatDependParams 3 } rlPolicyActionInProfileDropPrecedence OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "A bit mask indicating which drop precedence supported ---------- |87654321| ---------- 1 - low, 2 - medium, 3 - high, 4 - drop" ::= { rlPolicyActionPlatDependParams 4 } rlPolicyActionOutProfileDropPrecedence OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "A bit mask indicating which drop precedence supported ---------- |87654321| ---------- 1 - low, 2 - medium, 3 - high, 4 - drop" ::= { rlPolicyActionPlatDependParams 5 } rlPolicyActionDscpSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether the platform support at DSCP filed modification." ::= { rlPolicyActionPlatDependParams 6 } rlPolicyActionDsQueueManagmentSupported OBJECT-TYPE SYNTAX INTEGER { supported(1), notSupported(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether the platform supports at Q managment for implementation, mred, randomDrop used by the min/max threshold" ::= { rlPolicyActionPlatDependParams 7 } -- -- Action Table -- rlPolicyActionTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the Actions for packets that pass the meter table ie. the characteristics that are assigned to packets before they reach the scheduler. When Diffserv is not in effect(ie. IPX, bridging, or IP when the global option for Diffserv is off), certain table parameters are not available(see below). The DiffServ option is enabled or disabled by setting rlDiffservModeEnabled." ::= { rlPolicyAction 2 } rlPolicyActionEntry OBJECT-TYPE SYNTAX RlPolicyActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each multifield classification statement consists of the following parameters" INDEX { rlPolicyActionIndex } ::= { rlPolicyActionTable 1 } RlPolicyActionEntry ::= SEQUENCE { rlPolicyActionIndex INTEGER, rlPolicyActionNewDscp INTEGER, rlPolicyActionChangeDscp TruthValue, rlPolicyActionMinThreshold INTEGER, rlPolicyActionMaxThreshold INTEGER, rlPolicyActionDropPolicy INTEGER, rlPolicyActionDroppedPackets Counter32, rlPolicyActionNonDsInProfileDropPrecedence INTEGER, rlPolicyActionNonDsOutProfileDropPrecedence INTEGER, rlPolicyActionChangeVpt TruthValue, rlPolicyActionNewVpt INTEGER, rlPolicyActionServiceClassPointer INTEGER, rlPolicyActionStatus RowStatus, rlPolicyActionChangeDscpNonConform TruthValue, rlPolicyActionChangeNewDscpNonConform INTEGER, rlPolicyActionAdvancedTrustMode TruthValue, rlPolicyActionNewIpPrecedence INTEGER, rlPolicyActionChangeIpPrecedence TruthValue, rlPolicyActionReDirect RlPolicyRedirectAction, rlPolicyActionNewInterface InterfaceIndexOrZero, rlPolicyActionChangeVidAction RlPolicyMarkVlanAction, rlPolicyActionNewVid INTEGER, rlPolicyActionTrapTypeId INTEGER, rlPolicyActionAddTunnel Unsigned32 } rlPolicyActionIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This enumerates the Action entry." ::= { rlPolicyActionEntry 1 } rlPolicyActionNewDscp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the new DSCP with which the packet should be marked" DEFVAL{ 0 } ::= { rlPolicyActionEntry 2 } rlPolicyActionChangeDscp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the packet is re-marked with the value indicated by newDscp above. If false, the packet's DSCP value is not changed" DEFVAL{ false } ::= { rlPolicyActionEntry 3 } rlPolicyActionMinThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The min-threshold is the queue depth that a random drop process will seek to manage the queue's depth to. This object is in the action table rather than the queue table because Differentiated Services PHBs, such as the Assured Service, permit differently classified traffic to have different drop parameters even though they occupy the same queue." DEFVAL{ 0 } ::= { rlPolicyActionEntry 4 } rlPolicyActionMaxThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The max-threshold is the maximum permissible queue depth. In tail drop scenarios, the queue will drop if a packet is presented to it and it is instantaneously full by this measure. In random drop scenarios, the queue will drop if a packet is presented to it and the average queue depth exceeds the max-threshold. This object is in the action table rather than the queue table because Differentiated Services PHBs, such as the Assured Service, permit differently classified traffic to have different drop parameters even though they occupy the same queue." DEFVAL { 0 } ::= { rlPolicyActionEntry 5 } rlPolicyActionDropPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), alwaysDrop (2), -- Disallowed traffic tailDrop(3), -- Fixed Queue Size randomDrop(4) -- MRED w/thresholds per class } MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFVAL{ other } ::= { rlPolicyActionEntry 6 } rlPolicyActionDroppedPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped by this action" ::= { rlPolicyActionEntry 7 } rlPolicyActionNonDsInProfileDropPrecedence OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), drop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This paramer is used at non diffserv mode to attached the drop precedence for packet InProfile (metering), only if there is a support for drop precedence and with what level." DEFVAL{ low } ::= { rlPolicyActionEntry 8} rlPolicyActionNonDsOutProfileDropPrecedence OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), drop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This paramer is used at non diffserv mode to attached the drop precedence for packet OutProfile (metering), only if there is a support for drop precedence and with what level." DEFVAL{ low } ::= { rlPolicyActionEntry 9} rlPolicyActionChangeVpt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Routed packets that run through the Rules receive VPT as define at the service class they attached to, bridge packets receive through the 802.1p operation unless we define to change the VPT for those packets." DEFVAL { false } ::= { rlPolicyActionEntry 10 } rlPolicyActionNewVpt OBJECT-TYPE SYNTAX INTEGER (0 .. 7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority Tag that will be written to packets ." DEFVAL { 0 } ::= { rlPolicyActionEntry 11 } rlPolicyActionServiceClassPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the index in rlPolicyServiceClassTable denoting the service class to which the packet should be assigned after the action specified in this entry is carried out. A value of 0 means that no Service class is assigned. A value of 0 is legal only for routedIp packets in Diffserv mode on Inbound processing." ::= { rlPolicyActionEntry 12} rlPolicyActionStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the table entry" ::= { rlPolicyActionEntry 13} rlPolicyActionChangeDscpNonConform OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the packet is re-marked with the value indicated by newDscp for non conforming packets. If false, the packet's DSCP value is not changed" DEFVAL{ false } ::= { rlPolicyActionEntry 14 } rlPolicyActionChangeNewDscpNonConform OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the new DSCP with which the packet should be marked" DEFVAL{ 0 } ::= { rlPolicyActionEntry 15 } rlPolicyActionAdvancedTrustMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if egress queue is assigned for packets match rule according to global trust mode or note." DEFVAL{ false } ::= { rlPolicyActionEntry 16 } rlPolicyActionNewIpPrecedence OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the new Ip- Precedence with which the packet should be marked" DEFVAL{ 0 } ::= { rlPolicyActionEntry 17 } rlPolicyActionChangeIpPrecedence OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the packet is re-marked with the value indicated by newIpPrecedence above. If false, the packet's DSCP value is not changed" DEFVAL{ false } ::= { rlPolicyActionEntry 18 } rlPolicyActionReDirect OBJECT-TYPE SYNTAX RlPolicyRedirectAction MAX-ACCESS read-write STATUS current DESCRIPTION "Specified the redirection action/" DEFVAL{ disabled } ::= { rlPolicyActionEntry 19 } rlPolicyActionNewInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Relevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort'. Specified the output interface the packet is redireted to or the port that gets copy of the packet in addition to the port it was farwarded. " DEFVAL{ 0 } ::= { rlPolicyActionEntry 20 } rlPolicyActionChangeVidAction OBJECT-TYPE SYNTAX RlPolicyMarkVlanAction MAX-ACCESS read-write STATUS current DESCRIPTION "If 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defined as VLAN tagged member then a new VLAN tag is added to the packet." DEFVAL{ noMark } ::= { rlPolicyActionEntry 21 } rlPolicyActionNewVid OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "If rlPolicyActionChangeVid is true, specify the new Vlan id to assigned to the packet" DEFVAL{ 0 } ::= { rlPolicyActionEntry 22 } rlPolicyActionTrapTypeId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "If now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror." DEFVAL{ 0} ::= { rlPolicyActionEntry 23 } rlPolicyActionAddTunnel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "If not zero - Tunnel is added to matched packets." DEFVAL{ 0 } ::= { rlPolicyActionEntry 24 } ------------------- -- Service Class ------------------- rlPolicyServiceClass OBJECT IDENTIFIER ::= { rlPolicy 6 } rlPolicyServiceClassPlatDependParams OBJECT IDENTIFIER ::= { rlPolicyServiceClass 1 } rlPolicyNumberOfServiceClassesSupported OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of service classes supported on each port of the platform. Service classes can be neither created nor destroyed." ::= { rlPolicyServiceClassPlatDependParams 1 } rlPolicyBoundedPriorityQueueSupport OBJECT-TYPE SYNTAX INTEGER { supported(1), notSupported(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether the platform supports setting an upper limit to the bandwidth of traffic transmitted on queues operating in Strict Priority mode." ::= { rlPolicyServiceClassPlatDependParams 2 } rlPolicyDefaultServiceClass OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which service class is default one for packets whose COS is undetermined." ::= { rlPolicyServiceClass 2 } rlPolicyActiveServiceClassTable OBJECT-TYPE SYNTAX INTEGER { active(1), notActive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Service Class table preform active action (usuarlly after set of entries at the service class tentative table). Specifies the current status of a table, there could be two options, tentative/active table. only the tentative table is the read-write and the active table is read-only. at set to activeAction the tentative table will be copied to the active table." ::= { rlPolicyServiceClass 3 } -- -- Service Class Table -- rlPolicyServiceClassTentativeTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyServiceClassTentativeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the service classes for the system ie. the queue discipline and weight characteristics that are implemented on each port unless the user configures a port specific value in .... The total number of service classes defined can not exceed rlPolicyNumberOfTransmitQueuesPerPort." ::= { rlPolicyServiceClass 4 } rlPolicyServiceClassTentativeEntry OBJECT-TYPE SYNTAX RlPolicyServiceClassTentativeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each multifield classification statement consists of the following parameters" INDEX { rlPolicyServiceClassTentativeIndex } ::= { rlPolicyServiceClassTentativeTable 1 } RlPolicyServiceClassTentativeEntry ::= SEQUENCE { rlPolicyServiceClassTentativeIndex INTEGER, rlPolicyServiceClassTentativeName DisplayString, rlPolicyServiceClassTentativePhbType INTEGER, rlPolicyServiceClassTentativeMinRate INTEGER, rlPolicyServiceClassTentativeMaxRate INTEGER, rlPolicyServiceClassTentativePriority INTEGER, rlPolicyServiceClassTentative8021DPri INTEGER, rlPolicyServiceClassTentativeStatus RowStatus, rlPolicyServiceClassTentativeTdThersholdDp0 INTEGER, rlPolicyServiceClassTentativeTdThersholdDp1 INTEGER, rlPolicyServiceClassTentativeTdThersholdDp2 INTEGER, rlPolicyServiceClassTentativeRedMinDp0 INTEGER, rlPolicyServiceClassTentativeRedMaxDp0 INTEGER, rlPolicyServiceClassTentativeRedProbDp0 INTEGER, rlPolicyServiceClassTentativeRedMinDp1 INTEGER, rlPolicyServiceClassTentativeRedMaxDp1 INTEGER, rlPolicyServiceClassTentativeRedProbDp1 INTEGER, rlPolicyServiceClassTentativeRedMinDp2 INTEGER, rlPolicyServiceClassTentativeRedMaxDp2 INTEGER, rlPolicyServiceClassTentativeRedProbDp2 INTEGER, rlPolicyServiceClassTentativeRedQweight INTEGER, rlPolicyServiceClassTentativeShaperStatus TruthValue, rlPolicyServiceClassTentativeCirQueueShaper INTEGER, rlPolicyServiceClassTentativeCbsQueueShaper INTEGER } rlPolicyServiceClassTentativeIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This enumerates the ServiceClass Tentative entry." ::= { rlPolicyServiceClassTentativeEntry 1 } rlPolicyServiceClassTentativeName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name given by the system administrator to the class." ::= { rlPolicyServiceClassTentativeEntry 2 } rlPolicyServiceClassTentativePhbType OBJECT-TYPE SYNTAX INTEGER { expeditedForwarding(1), assuredForwarding(2), bestEffort(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the type of Diffserv per-hop behaviour that this service class is intended to support. This object can be set by the user only in DiffServ mode (i.e. rlDiffservModeEnabled = enabled)." DEFVAL { bestEffort } ::= { rlPolicyServiceClassTentativeEntry 3 } rlPolicyServiceClassTentativeMinRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies either the minimum throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, there is no minimum rate. This field can not be set by the user if rlDiffservModeEnabled = disabled and rlPolicyServiceClassPriority > 0 or rlDiffservModeEnabled = enabled and rlPolicyServiceClassPhbType = expeditedForwarding." ::= { rlPolicyServiceClassTentativeEntry 4 } rlPolicyServiceClassTentativeMaxRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies either the upper limit on the throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, there is no maximum rate. This field can not be set by the user if rlDiffservModeEnabled = disabled and rlPolicyServiceClassPriority = 0 or rlDiffservModeEnabled = enabled and rlPolicyServiceClassPhbType != expeditedForwarding or rlBoundedPriorityQueueSupport = notSupported." ::= { rlPolicyServiceClassTentativeEntry 5 } rlPolicyServiceClassTentativePriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "If non-zero, this service class will operate as a priority service class with the specified priority value. This object can not be set in Diffserv mode (i.e. rlDiffservModeEnabled = enabled), in which case rlServiceClassPhbType should be used instead. It can't be set when rlBoundedPriorityQueueSupport = notSupported as well." ::= { rlPolicyServiceClassTentativeEntry 6 } rlPolicyServiceClassTentative8021DPri OBJECT-TYPE SYNTAX INTEGER (0 .. 7) MAX-ACCESS read-write STATUS current DESCRIPTION "802.1D Priority Tag that will be written to routed packets and untagged bridged packets transmitted with this service class." ::= { rlPolicyServiceClassTentativeEntry 7 } rlPolicyServiceClassTentativeStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Status of this entry." ::= { rlPolicyServiceClassTentativeEntry 8 } rlPolicyServiceClassTentativeTdThersholdDp0 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 0. UNITS percent 0-100" ::= { rlPolicyServiceClassTentativeEntry 9 } rlPolicyServiceClassTentativeTdThersholdDp1 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 1. UNITS percent 0-100" ::= { rlPolicyServiceClassTentativeEntry 10 } rlPolicyServiceClassTentativeTdThersholdDp2 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 2. UNITS percent 0-100" ::= { rlPolicyServiceClassTentativeEntry 11 } rlPolicyServiceClassTentativeRedMinDp0 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 0. UNITS percent 0-100" ::= { rlPolicyServiceClassTentativeEntry 12 } rlPolicyServiceClassTentativeRedMaxDp0 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 0. UNITS percent 0-100" ::= { rlPolicyServiceClassTentativeEntry 13 } rlPolicyServiceClassTentativeRedProbDp0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED probability for Drop Precedence 0." ::= { rlPolicyServiceClassTentativeEntry 14 } rlPolicyServiceClassTentativeRedMinDp1 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 1. UNITS percent 0-100" ::= { rlPolicyServiceClassTentativeEntry 15 } rlPolicyServiceClassTentativeRedMaxDp1 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 1. UNITS percent 0-100" ::= { rlPolicyServiceClassTentativeEntry 16 } rlPolicyServiceClassTentativeRedProbDp1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED probability for Drop Precedence 1." ::= { rlPolicyServiceClassTentativeEntry 17 } rlPolicyServiceClassTentativeRedMinDp2 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 2. UNITS percent 0-100" ::= { rlPolicyServiceClassTentativeEntry 18 } rlPolicyServiceClassTentativeRedMaxDp2 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 2. UNITS percent 0-100" ::= { rlPolicyServiceClassTentativeEntry 19 } rlPolicyServiceClassTentativeRedProbDp2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED probability for Drop Precedence 2." ::= { rlPolicyServiceClassTentativeEntry 20 } rlPolicyServiceClassTentativeRedQweight OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "additional parameter for the WRED algorithem supporting the Queue weight exponentail factor" ::= { rlPolicyServiceClassTentativeEntry 21 } rlPolicyServiceClassTentativeShaperStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If there is shaper on the Queue" ::= { rlPolicyServiceClassTentativeEntry 22 } rlPolicyServiceClassTentativeCirQueueShaper OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The CIR for the Queue shaper. N/A when the shper is disabled. UNITS bps bits per second" ::= { rlPolicyServiceClassTentativeEntry 23 } rlPolicyServiceClassTentativeCbsQueueShaper OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The CBS for the Queue shaper. N/A when the shper is disabled. UNITS bytes" ::= { rlPolicyServiceClassTentativeEntry 24 } rlPolicyServiceClassActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyServiceClassActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the service classes for the system ie. the queue discipline and weight characteristics that are implemented on each port unless the user configures a port specific value in .... The total number of service classes defined can not exceed rlPolicyNumberOfTransmitQueuesPerPort." ::= { rlPolicyServiceClass 5 } rlPolicyServiceClassActiveEntry OBJECT-TYPE SYNTAX RlPolicyServiceClassActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each multifield classification statement consists of the following parameters" INDEX { rlPolicyServiceClassActiveIndex } ::= { rlPolicyServiceClassActiveTable 1 } RlPolicyServiceClassActiveEntry ::= SEQUENCE { rlPolicyServiceClassActiveIndex INTEGER, rlPolicyServiceClassActiveName DisplayString, rlPolicyServiceClassActivePhbType INTEGER, rlPolicyServiceClassActiveMinRate INTEGER, rlPolicyServiceClassActiveMaxRate INTEGER, rlPolicyServiceClassActivePriority INTEGER, rlPolicyServiceClassActive8021DPri INTEGER, rlPolicyServiceClassActiveTdThersholdDp0 INTEGER, rlPolicyServiceClassActiveTdThersholdDp1 INTEGER, rlPolicyServiceClassActiveTdThersholdDp2 INTEGER, rlPolicyServiceClassActiveRedMinDp0 INTEGER, rlPolicyServiceClassActiveRedMaxDp0 INTEGER, rlPolicyServiceClassActiveRedProbDp0 INTEGER, rlPolicyServiceClassActiveRedMinDp1 INTEGER, rlPolicyServiceClassActiveRedMaxDp1 INTEGER, rlPolicyServiceClassActiveRedProbDp1 INTEGER, rlPolicyServiceClassActiveRedMinDp2 INTEGER, rlPolicyServiceClassActiveRedMaxDp2 INTEGER, rlPolicyServiceClassActiveRedProbDp2 INTEGER, rlPolicyServiceClassActiveRedQweight INTEGER, rlPolicyServiceClassActiveShaperStatus TruthValue, rlPolicyServiceClassActiveCirQueueShaper INTEGER, rlPolicyServiceClassActiveCbsQueueShaper INTEGER } rlPolicyServiceClassActiveIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This enumerates the ServiceClass Active entry." ::= { rlPolicyServiceClassActiveEntry 1 } rlPolicyServiceClassActiveName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name given by the system administrator to the class." ::= { rlPolicyServiceClassActiveEntry 2 } rlPolicyServiceClassActivePhbType OBJECT-TYPE SYNTAX INTEGER { expeditedForwarding(1), assuredForwarding(2), bestEffort(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of Diffserv per-hop behaviour that this service class is intended to support. This object can be set by the user only in DiffServ mode (i.e. rlDiffservModeEnabled = enabled)." DEFVAL { bestEffort } ::= { rlPolicyServiceClassActiveEntry 3 } rlPolicyServiceClassActiveMinRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies either the minimum throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, there is no minimum rate. This field can not be set by the user if rlDiffservModeEnabled = disabled and rlPolicyServiceClassPriority > 0 or rlDiffservModeEnabled = enabled and rlPolicyServiceClassPhbType = expeditedForwarding." ::= { rlPolicyServiceClassActiveEntry 4 } rlPolicyServiceClassActiveMaxRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies either the upper limit on the throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, there is no maximum rate. This field can not be set by the user if rlDiffservModeEnabled = disabled and rlPolicyServiceClassPriority = 0 or rlDiffservModeEnabled = enabled and rlPolicyServiceClassPhbType != expeditedForwarding or rlBoundedPriorityQueueSupport = notSupported." ::= { rlPolicyServiceClassActiveEntry 5 } rlPolicyServiceClassActivePriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "If non-zero, this service class will operate as a priority service class with the specified priority value. This object can not be set in Diffserv mode (i.e. rlDiffservModeEnabled = enabled), in which case rlServiceClassPhbType should be used instead. It can't be set when rlBoundedPriorityQueueSupport = notSupported as well." ::= { rlPolicyServiceClassActiveEntry 6 } rlPolicyServiceClassActive8021DPri OBJECT-TYPE SYNTAX INTEGER (0 .. 7) MAX-ACCESS read-only STATUS current DESCRIPTION "802.1D Priority Tag that will be written to routed packets and untagged bridged packets transmitted with this service class." ::= { rlPolicyServiceClassActiveEntry 7 } rlPolicyServiceClassActiveTdThersholdDp0 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 0. UNITS percent 0-100" ::= { rlPolicyServiceClassActiveEntry 8 } rlPolicyServiceClassActiveTdThersholdDp1 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 1. UNITS percent 0-100" ::= { rlPolicyServiceClassActiveEntry 9 } rlPolicyServiceClassActiveTdThersholdDp2 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 2. UNITS percent 0-100" ::= { rlPolicyServiceClassActiveEntry 10 } rlPolicyServiceClassActiveRedMinDp0 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 0. UNITS percent 0-100" ::= { rlPolicyServiceClassActiveEntry 11 } rlPolicyServiceClassActiveRedMaxDp0 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 0. UNITS percent 0-100" ::= { rlPolicyServiceClassActiveEntry 12 } rlPolicyServiceClassActiveRedProbDp0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "WRED probability for Drop Precedence 0." ::= { rlPolicyServiceClassActiveEntry 13 } rlPolicyServiceClassActiveRedMinDp1 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 1. UNITS percent 0-100" ::= { rlPolicyServiceClassActiveEntry 14 } rlPolicyServiceClassActiveRedMaxDp1 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 1. UNITS percent 0-100" ::= { rlPolicyServiceClassActiveEntry 15 } rlPolicyServiceClassActiveRedProbDp1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "WRED probability for Drop Precedence 1." ::= { rlPolicyServiceClassActiveEntry 16 } rlPolicyServiceClassActiveRedMinDp2 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 2. UNITS percent 0-100" ::= { rlPolicyServiceClassActiveEntry 17 } rlPolicyServiceClassActiveRedMaxDp2 OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 2. UNITS percent 0-100" ::= { rlPolicyServiceClassActiveEntry 18 } rlPolicyServiceClassActiveRedProbDp2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "WRED probability for Drop Precedence 2." ::= { rlPolicyServiceClassActiveEntry 19 } rlPolicyServiceClassActiveRedQweight OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "additional parameter for the WRED algorithem supporting the Queue weight exponentail factor" ::= { rlPolicyServiceClassActiveEntry 20 } rlPolicyServiceClassActiveShaperStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If there is shaper on the Queue" ::= { rlPolicyServiceClassActiveEntry 21 } rlPolicyServiceClassActiveCirQueueShaper OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The CIR for the queue shaper. N/A when the shper is disabled UNITS bps bits per second" ::= { rlPolicyServiceClassActiveEntry 22 } rlPolicyServiceClassActiveCbsQueueShaper OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The CBS for the queue shaper. N/A when the shper is disabled. UNITS bytes" ::= { rlPolicyServiceClassActiveEntry 23 } -- -- Port configuration table. -- rlPolicyPortConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyPortCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table enables the network administrator to fine-tune the bandwidth given to each service class on each port. The values in this table will thus override those of the rlServiceClassTable (THIS TABLE IS MANAGE FROM 3SW). " ::= { rlPolicyServiceClass 6 } rlPolicyPortCfgEntry OBJECT-TYPE SYNTAX RlPolicyPortCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for each port/service class." INDEX { rlPolicyPortCfgIfIndex } ::= { rlPolicyPortConfigurationTable 1 } RlPolicyPortCfgEntry ::= SEQUENCE { rlPolicyPortCfgIfIndex InterfaceIndex, rlPolicyPortCfgMinimalBandwidth OBJECT IDENTIFIER, rlPolicyPortCfgMaximalBandwidth OBJECT IDENTIFIER, rlPolicyPortCfgStatus RowStatus, rlpolicyDropProfilePointer INTEGER, rlPolicyPortCfgQueueShaperStatus OBJECT IDENTIFIER, rlPolicyPortCfgCirQueueShaper OBJECT IDENTIFIER, rlPolicyPortCfgCbsQueueShaper OBJECT IDENTIFIER, rlPolicyPortCfgPortShaperStatus TruthValue, rlPolicyPortCfgCirPortShaper INTEGER, rlPolicyPortCfgCbsPortShaper INTEGER, rlPolicyPortCfgPortRateLimitStatus TruthValue, rlPolicyPortCfgCirPortRateLimit INTEGER, rlPolicyPortCfgCbsPortRateLimit INTEGER } rlPolicyPortCfgIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index." ::= { rlPolicyPortCfgEntry 1 } rlPolicyPortCfgMinimalBandwidth OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "The list of objects contain parameters at Precents type for the minimal bandwidth to this port/service class at WWR . The OID length is based on the number of the service class number, every OID define parameter of service class." ::= { rlPolicyPortCfgEntry 2 } rlPolicyPortCfgMaximalBandwidth OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "The list of objects contain parameters at Precents type for the maximal bandwidth to this port/service class at SP . The OID length is based on the number of the service class number, every OID define parameter of service class." ::= { rlPolicyPortCfgEntry 3 } rlPolicyPortCfgStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Status of this entry." ::= { rlPolicyPortCfgEntry 4 } rlpolicyDropProfilePointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "pointing to drop algorithem profile. the profile describs the drop algorithem (tail, red)and params" ::= { rlPolicyPortCfgEntry 5 } rlPolicyPortCfgQueueShaperStatus OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "If there is shaper on the Queue" ::= { rlPolicyPortCfgEntry 6 } rlPolicyPortCfgCirQueueShaper OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "The CIR for the Queue shaper. N/A when the shper is disabled UNITS bps bits per second" ::= { rlPolicyPortCfgEntry 7 } rlPolicyPortCfgCbsQueueShaper OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "The CBS for the Queue shaper. N/A when the shper is disabled. UNITS bytes" ::= { rlPolicyPortCfgEntry 8 } rlPolicyPortCfgPortShaperStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If there is shaper on the port" ::= { rlPolicyPortCfgEntry 9 } rlPolicyPortCfgCirPortShaper OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The CIR for the port shaper. N/A when the shper is disabled UNITS bps bits per second" ::= { rlPolicyPortCfgEntry 10 } rlPolicyPortCfgCbsPortShaper OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The CBS for the port shaper. N/A when the shper is disabled. UNITS bytes" ::= { rlPolicyPortCfgEntry 11 } rlPolicyPortCfgPortRateLimitStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If there is Rate Limit on the port" DEFVAL { false } ::= { rlPolicyPortCfgEntry 12 } rlPolicyPortCfgCirPortRateLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The CIR for the port Rate limit. N/A when the Rate limit is disabled UNITS bps bits per second" DEFVAL { 0 } ::= { rlPolicyPortCfgEntry 13 } rlPolicyPortCfgCbsPortRateLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The CBS for the port Rate Limit. N/A when the Rate Limit is disabled. UNITS bytes" DEFVAL { 0 } ::= { rlPolicyPortCfgEntry 14 } -- -- drop profile table. -- rlPolicyDropProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyDropProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " this table defines drop profile which describ the queue's drop algorithems" ::= { rlPolicyServiceClass 7 } rlPolicyDropProfileEntry OBJECT-TYPE SYNTAX RlPolicyDropProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for each port/service class." INDEX { rlPolicyDropProfileIndex,rlPolicyDropProfileQueueNumber} ::= { rlPolicyDropProfileTable 1 } RlPolicyDropProfileEntry ::= SEQUENCE { rlPolicyDropProfileIndex INTEGER, rlPolicyDropProfileQueueNumber INTEGER, rlPolicyDropProfileTdThersholdDp0 INTEGER, rlPolicyDropProfileTdThersholdDp1 INTEGER, rlPolicyDropProfileTdThersholdDp2 INTEGER, rlPolicyDropProfileRedMinDp0 INTEGER, rlPolicyDropProfileRedMaxDp0 INTEGER, rlPolicyDropProfileRedProbDp0 INTEGER, rlPolicyDropProfileRedMinDp1 INTEGER, rlPolicyDropProfileRedMaxDp1 INTEGER, rlPolicyDropProfileRedProbDp1 INTEGER, rlPolicyDropProfileRedMinDp2 INTEGER, rlPolicyDropProfileRedMaxDp2 INTEGER, rlPolicyDropProfileRedProbDp2 INTEGER, rlPolicyDropProfileRedQweight INTEGER, rlPolicyDropProfileStatus RowStatus } rlPolicyDropProfileIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index." ::= { rlPolicyDropProfileEntry 1 } rlPolicyDropProfileQueueNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Queue number." ::= { rlPolicyDropProfileEntry 2 } rlPolicyDropProfileTdThersholdDp0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 0. UNITS percent 0-100" ::= { rlPolicyDropProfileEntry 3 } rlPolicyDropProfileTdThersholdDp1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 1. UNITS percent 0-100" ::= { rlPolicyDropProfileEntry 4 } rlPolicyDropProfileTdThersholdDp2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 2. UNITS percent 0-100" ::= { rlPolicyDropProfileEntry 5 } rlPolicyDropProfileRedMinDp0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 0. UNITS percent 0-100" ::= { rlPolicyDropProfileEntry 6 } rlPolicyDropProfileRedMaxDp0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 0. UNITS percent 0-100 0-100" ::= { rlPolicyDropProfileEntry 7 } rlPolicyDropProfileRedProbDp0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED probability for Drop Precedence 0." ::= { rlPolicyDropProfileEntry 8 } rlPolicyDropProfileRedMinDp1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 1. UNITS percent 0-100" ::= { rlPolicyDropProfileEntry 9 } rlPolicyDropProfileRedMaxDp1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 1. UNITS percent 0-100" ::= { rlPolicyDropProfileEntry 10 } rlPolicyDropProfileRedProbDp1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED probability for Drop Precedence 1." ::= { rlPolicyDropProfileEntry 11 } rlPolicyDropProfileRedMinDp2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 2. UNITS percent 0-100" ::= { rlPolicyDropProfileEntry 12 } rlPolicyDropProfileRedMaxDp2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 2. UNITS percent 0-100" ::= { rlPolicyDropProfileEntry 13 } rlPolicyDropProfileRedProbDp2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "WRED probability for Drop Precedence 2." ::= { rlPolicyDropProfileEntry 14 } rlPolicyDropProfileRedQweight OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "additional parameter for the WRED algorithem supporting the Queue weight exponentail factor" ::= { rlPolicyDropProfileEntry 15 } rlPolicyDropProfileStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Status of this entry." ::= { rlPolicyDropProfileEntry 16 } -- -- Vlan Configuration table. -- rlPolicyVlanConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyVlanCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table enables the network administrator to fine-tune the rate limit given to each vlan. The values in this table will thus override those of the rlQosIfPolicyTable (THIS TABLE IS MANAGED FROM 3SW). " ::= { rlPolicyServiceClass 8 } rlPolicyVlanCfgEntry OBJECT-TYPE SYNTAX RlPolicyVlanCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for each vlan." INDEX { rlPolicyVlanCfgVlanId } ::= { rlPolicyVlanConfigurationTable 1 } RlPolicyVlanCfgEntry ::= SEQUENCE { rlPolicyVlanCfgVlanId VlanId, rlPolicyVlanCfgPortRateLimitStatus TruthValue, rlPolicyVlanCfgCirPortRateLimit INTEGER, rlPolicyVlanCfgCbsPortRateLimit INTEGER, rlPolicyVlanCfgStatus RowStatus } rlPolicyVlanCfgVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index." ::= { rlPolicyVlanCfgEntry 1 } rlPolicyVlanCfgPortRateLimitStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If there is Rate Limit on the vlan" DEFVAL { false } ::= { rlPolicyVlanCfgEntry 2 } rlPolicyVlanCfgCirPortRateLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The CIR for the port Rate limit. N/A when the Rate limit is disabled UNITS bps bits per second" ::= { rlPolicyVlanCfgEntry 3 } rlPolicyVlanCfgCbsPortRateLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The CBS for the port Rate Limit. N/A when the Rate Limit is disabled. UNITS bytes" ::= { rlPolicyVlanCfgEntry 4 } rlPolicyVlanCfgStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Status of this entry." ::= { rlPolicyVlanCfgEntry 5 } ------------ -- DiffServ --- rlPolicyDiffServ OBJECT IDENTIFIER ::= { rlPolicy 7 } rlPolicyDiffServPlatDependParams OBJECT IDENTIFIER ::= { rlPolicyDiffServ 1 } rlDiffservModeSupported OBJECT-TYPE SYNTAX INTEGER { supported(1), notSupported(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates whether Diffserv mode is supported on the platform." ::= { rlPolicyDiffServPlatDependParams 1 } rlDiffservModeEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Diffserv mode is currently enabled." ::= { rlPolicyDiffServ 2 } -- -- Diffserv Boundary / Interior port table for DiffServ mode -- rlDiffservBoundaryTable OBJECT-TYPE SYNTAX SEQUENCE OF RlDiffservBoundaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates whether a port is considered a boundary or an interior node of the Diffserv domain" ::= { rlPolicyDiffServ 3 } rlDiffservBoundaryEntry OBJECT-TYPE SYNTAX RlDiffservBoundaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each boundary/interior ports table entry consists of the following parameters" INDEX { rlDiffservBoundaryIfIndex } ::= { rlDiffservBoundaryTable 1 } RlDiffservBoundaryEntry ::= SEQUENCE { rlDiffservBoundaryIfIndex INTEGER, rlDiffservBoundaryPortType INTEGER, rlDiffservBoundaryStatus RowStatus } rlDiffservBoundaryIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The Interface index whose type is being defined" ::= { rlDiffservBoundaryEntry 1 } rlDiffservBoundaryPortType OBJECT-TYPE SYNTAX INTEGER { boundary(1), interior(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The boundary status of the port." DEFVAL { boundary } ::= { rlDiffservBoundaryEntry 2 } rlDiffservBoundaryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Status of this entry." ::= { rlDiffservBoundaryEntry 3 } -- -- Global Params -- rlPolicyGlobalParams OBJECT IDENTIFIER ::= { rlPolicy 9 } rlPolicyGlobalOperationEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Policy is currently enabled." DEFVAL{ disabled } ::= { rlPolicyGlobalParams 1 } rlPolicyGlobalDefaultForwarding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether or not the unmach traffic is forwarded or blocked." ::= { rlPolicyGlobalParams 2 } rlPolicyGlobalAdminTrapfrequency OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "define the the min number of seconds between successive traps. 0 means no traps will be sent, uints in Sec" DEFVAL { 0 } ::= { rlPolicyGlobalParams 3 } rlPolicyGlobalOperTrapElapsedTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "show the time out elaps from the last trap sent uints in Sec." ::= { rlPolicyGlobalParams 4 } rlPolicyGlobalQosMode OBJECT-TYPE SYNTAX RlPolicyQosMode MAX-ACCESS read-write STATUS deprecated DESCRIPTION "V750 DEPRECATED - replaced with rlPolicyGlobalQosMode field in rlPolicyQosModeGlobalCfg table. user can set the system to operate either in the Basic mode or in the Advanced mode" ::= { rlPolicyGlobalParams 5 } rlPolicyGlobalTrustMode OBJECT-TYPE SYNTAX RlPolicyTrustTypes MAX-ACCESS read-write STATUS deprecated DESCRIPTION "V750 DEPRECATED - replaced with rlPolicyGlobalTrustMode field in rlPolicyQosModeGlobalCfg table. Global Trust state. the value refered to Basic mode and specify the trust mode the device is support. all phisical ports are trusted " ::= { rlPolicyGlobalParams 6 } -- -- Global Params for Qos mib -- rlPolicyGlobalDeviceQosOperationTypes OBJECT-TYPE SYNTAX INTEGER { disable(1), basic(2), advanced(3), all(4), notSupported(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the system support basic or advanced mode or Both basic and Advanced" ::= { rlPolicyGlobalParams 7 } rlPolicyGlobalDscpMutationSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "mutation over the ingress packet dscp field supported for the device." ::= { rlPolicyGlobalParams 8 } rlPolicyGlobalClassifyIpPrecedenceSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates if the system support classification according ip precedence most significant 3 bits in the TOS byte" ::= { rlPolicyGlobalParams 9 } rlPolicyGlobalDeviceShapingTypeSupported OBJECT-TYPE SYNTAX INTEGER { portShaper(1), queueShaper(2), portAndQueueShaper(3), notSupported(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the shaper shaper type supported for the device" ::= { rlPolicyGlobalParams 10 } rlPolicyGlobalDscpRemarkingSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if dscp remarking supported for the device" ::= { rlPolicyGlobalParams 11 } rlPolicyGlobalqueueSchedulerPerDeviceOrPort OBJECT-TYPE SYNTAX INTEGER { device(1), port(2)} MAX-ACCESS read-only STATUS obsolete DESCRIPTION "indicates if the system support scheduling configuration per port or per device. device (1 ) or port (2)" ::= { rlPolicyGlobalParams 12 } --- --- policy mapping --- rlPolicyMapping OBJECT IDENTIFIER ::= { rlPolicy 10 } --- Policy DSCP to ServiceClass mapping rlPolicyDscpServiceClassTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyDscpServiceClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The DSCP to ServiceClass map table" ::= { rlPolicyMapping 1 } rlPolicyDscpServiceClassEntry OBJECT-TYPE SYNTAX RlPolicyDscpServiceClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes The ServiceClass assigned to a Dscp value. The index is DSCP represent by rlPolicyDscpIndex" INDEX { rlPolicyDscpIndex } ::= { rlPolicyDscpServiceClassTable 1 } RlPolicyDscpServiceClassEntry::= SEQUENCE { rlPolicyDscpIndex INTEGER, rlPolicyServiceClassValue INTEGER, rlPolicyDscpServiceClassStatus RowStatus } rlPolicyDscpIndex OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "DSCP value." ::= { rlPolicyDscpServiceClassEntry 1 } rlPolicyServiceClassValue OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "ServiceClass value." ::= { rlPolicyDscpServiceClassEntry 2 } rlPolicyDscpServiceClassStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlPolicyDscpServiceClassEntry 3 } -- Policy TCP-UDP port to Service Class map rlPolicyTcpUdpPortServiceClassTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyTcpUdpPortServiceClassEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This table specifies TCP/UDP Port to ServiceClass map table" ::= { rlPolicyMapping 2 } rlPolicyTcpUdpPortServiceClassEntry OBJECT-TYPE SYNTAX RlPolicyTcpUdpPortServiceClassEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each entry in this table describes The ServiceClass Value. The index is TCP/UDP port represent by rlPolicyTcpUdpPort" INDEX { rlPolicyProtocolType , rlPolicyTcpUdpPort } ::= { rlPolicyTcpUdpPortServiceClassTable 1 } RlPolicyTcpUdpPortServiceClassEntry::= SEQUENCE { rlPolicyProtocolType L4ProtType, rlPolicyTcpUdpPort INTEGER, rlPolicyMappedServiceClass INTEGER, rlPolicyTcpUdpPortServiceClassStatus RowStatus } rlPolicyProtocolType OBJECT-TYPE SYNTAX L4ProtType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "TCP/UDP port type. " ::= { rlPolicyTcpUdpPortServiceClassEntry 1 } rlPolicyTcpUdpPort OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "TCP/UDP port number. " ::= { rlPolicyTcpUdpPortServiceClassEntry 2 } rlPolicyMappedServiceClass OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS obsolete DESCRIPTION "ServiceClass value." ::= { rlPolicyTcpUdpPortServiceClassEntry 3 } rlPolicyTcpUdpPortServiceClassStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlPolicyTcpUdpPortServiceClassEntry 4 } -- Policy ServiceClass Remark mapping rlPolicyDscpRemarkTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyDscpRemarkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The DSCP Remark table" ::= { rlPolicyMapping 3 } rlPolicyDscpRemarkEntry OBJECT-TYPE SYNTAX RlPolicyDscpRemarkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlPolicyOldDscp" INDEX { rlPolicyRmOldDscp } ::= { rlPolicyDscpRemarkTable 1 } RlPolicyDscpRemarkEntry::= SEQUENCE { rlPolicyRmOldDscp INTEGER, rlPolicyRmNewDscp INTEGER, rlPolicyDscpRemarkStatus RowStatus, rlPolicyRmNewExceedDscp INTEGER } rlPolicyRmOldDscp OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "Old DSCP." ::= { rlPolicyDscpRemarkEntry 1 } rlPolicyRmNewDscp OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "New DSCP for the violation action." ::= { rlPolicyDscpRemarkEntry 2 } rlPolicyDscpRemarkStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlPolicyDscpRemarkEntry 3 } rlPolicyRmNewExceedDscp OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "New DSCP for the exceed action." ::= { rlPolicyDscpRemarkEntry 4 } -- Policy DSCP Mutation Table rlPolicyDscpMutationTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyDscpMutationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The DSCP Mutation table" ::= { rlPolicyMapping 4 } rlPolicyDscpMutationEntry OBJECT-TYPE SYNTAX RlPolicyDscpMutationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlPolicyOldDscp" INDEX { rlPolicyOldDscp } ::= { rlPolicyDscpMutationTable 1 } RlPolicyDscpMutationEntry::= SEQUENCE { rlPolicyOldDscp INTEGER, rlPolicyNewDscp INTEGER, rlPolicyDscpMutationStatus RowStatus } rlPolicyOldDscp OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "Old DSCP." ::= { rlPolicyDscpMutationEntry 1 } rlPolicyNewDscp OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "New DSCP." ::= { rlPolicyDscpMutationEntry 2 } rlPolicyDscpMutationStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlPolicyDscpMutationEntry 3 } -- Policy Port set per trust mode table rlPolicyTrustModeTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyTrustModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the port state for the trusted basic mode" ::= { rlPolicyMapping 5 } rlPolicyTrustModeEntry OBJECT-TYPE SYNTAX RlPolicyTrustModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "describes the ports status that belongs to the global trusted state " INDEX { rlPolicyTrustModePortNumber } ::= { rlPolicyTrustModeTable 1 } RlPolicyTrustModeEntry::= SEQUENCE { rlPolicyTrustModePortNumber INTEGER, rlPolicyTrustModePortState INTEGER } rlPolicyTrustModePortNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "phisical port number ." ::= { rlPolicyTrustModeEntry 1 } rlPolicyTrustModePortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "the port state for the trusted mode. the port can be enabled or disabled for the basic trust mode " ::= { rlPolicyTrustModeEntry 2 } --- Policy DSCP to VPT mapping rlPolicyDscpVptTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyDscpVptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The DSCP to VPT map table" ::= { rlPolicyMapping 6 } rlPolicyDscpVptEntry OBJECT-TYPE SYNTAX RlPolicyDscpVptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes The VPT assigned to a Dscp value. The index is DSCP represent by rlPolicyDscpValue." INDEX { rlPolicyDscpValue } ::= { rlPolicyDscpVptTable 1 } RlPolicyDscpVptEntry::= SEQUENCE { rlPolicyDscpValue INTEGER, rlPolicyVptValue INTEGER, rlPolicyDscpVptStatus RowStatus } rlPolicyDscpValue OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "DSCP value." ::= { rlPolicyDscpVptEntry 1 } rlPolicyVptValue OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VPT value." ::= { rlPolicyDscpVptEntry 2 } rlPolicyDscpVptStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlPolicyDscpVptEntry 3 } -- Policy DSCP to DP Table rlPolicyDscpToDpTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyDscpToDpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The DSCP To Dp table" ::= { rlPolicyMapping 7 } rlPolicyDscpToDpEntry OBJECT-TYPE SYNTAX RlPolicyDscpToDpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the new DP for the packet. The index is DSCP represent by rlPolicyDscp" INDEX { rlPolicyDscp } ::= { rlPolicyDscpToDpTable 1 } RlPolicyDscpToDpEntry::= SEQUENCE { rlPolicyDscp INTEGER, rlPolicyDp INTEGER, rlPolicyDscpToDpStatus RowStatus } rlPolicyDscp OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "Packet DSCP." ::= { rlPolicyDscpToDpEntry 1 } rlPolicyDp OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "New DP." ::= { rlPolicyDscpToDpEntry 2 } rlPolicyDscpToDpStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlPolicyDscpToDpEntry 3 } -- Policy Default Forwarding Table rlPolicyDefaultForwardingTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyDefaultForwardingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The default forwarding values : permit or deny for list of specific ports , vlans" ::= { rlPolicy 11 } rlPolicyDefaultForwardingEntry OBJECT-TYPE SYNTAX RlPolicyDefaultForwardingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Since the table is search to find match according to first match Entries with specific protocol should be set before entries for entire layer." INDEX { rlPolicyDefaultForwardingIndex } ::= { rlPolicyDefaultForwardingTable 1 } RlPolicyDefaultForwardingEntry::= SEQUENCE { rlPolicyDefaultForwardingIndex INTEGER, rlPolicyDefaultForwardingPortList PortList, rlPolicyDefaultForwardingVlanId1To1024 VlanList1, rlPolicyDefaultForwardingVlanId1025To2048 VlanList2, rlPolicyDefaultForwardingVlanId2049To3072 VlanList3, rlPolicyDefaultForwardingVlanId3073To4096 VlanList4, rlPolicyDefaultForwardingLayer INTEGER, rlPolicyDefaultForwardingAction INTEGER, rlPolicyDefaultForwardingStatus RowStatus, rlPolicyDefaultForwardingProtocol INTEGER } rlPolicyDefaultForwardingIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Default Forwarding Index." ::= { rlPolicyDefaultForwardingEntry 1 } rlPolicyDefaultForwardingPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Default Forwarding Port List." ::= { rlPolicyDefaultForwardingEntry 2 } rlPolicyDefaultForwardingVlanId1To1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-write STATUS current DESCRIPTION "Default Forwarding VlanId List 1." ::= { rlPolicyDefaultForwardingEntry 3 } rlPolicyDefaultForwardingVlanId1025To2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-write STATUS current DESCRIPTION "Default Forwarding VlanId List 2." ::= { rlPolicyDefaultForwardingEntry 4 } rlPolicyDefaultForwardingVlanId2049To3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-write STATUS current DESCRIPTION "Default Forwarding VlanId List 3." ::= { rlPolicyDefaultForwardingEntry 5 } rlPolicyDefaultForwardingVlanId3073To4096 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-write STATUS current DESCRIPTION "Default Forwarding VlanId List 4." ::= { rlPolicyDefaultForwardingEntry 6 } rlPolicyDefaultForwardingLayer OBJECT-TYPE SYNTAX INTEGER { l2(1), l3(2), l3-ipv6(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Default Forwarding Action specify layer l2 l3 l3-ipv6" ::= { rlPolicyDefaultForwardingEntry 7 } rlPolicyDefaultForwardingAction OBJECT-TYPE SYNTAX INTEGER{ permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Default Forwarding Action specify permit or deny " ::= { rlPolicyDefaultForwardingEntry 8 } rlPolicyDefaultForwardingStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlPolicyDefaultForwardingEntry 9 } rlPolicyDefaultForwardingProtocol OBJECT-TYPE SYNTAX INTEGER { bpdu(1), icmpv6(2), none(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol type to be applied with the default action." DEFVAL{255} ::= { rlPolicyDefaultForwardingEntry 10 } rlPolicyStatistics OBJECT IDENTIFIER ::= { rlPolicy 12 } rlPolicyPortPolicyStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyPortPolicyStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies statistics counter for policies with specific actions" ::= { rlPolicyStatistics 1} rlPolicyPortPolicyStatisticsEntry OBJECT-TYPE SYNTAX RlPolicyPortPolicyStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whether it's enabled. " INDEX { rlPolicyPortPolicyStatisticsIfIndex,rlPolicyPortPolicyStatisticsCntrType } ::= { rlPolicyPortPolicyStatisticsTable 1 } RlPolicyPortPolicyStatisticsEntry::= SEQUENCE { rlPolicyPortPolicyStatisticsIfIndex INTEGER, rlPolicyPortPolicyStatisticsCntrType StatisticsCntrType, rlPolicyPolicyStatisticsCntrSize StatisticsCntrNumOfBitsType, rlPolicyPolicyStatisticsEnableCounting TruthValue, rlPolicyPolicyStatisticsCounterValue Counter64 } rlPolicyPortPolicyStatisticsIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index." ::= { rlPolicyPortPolicyStatisticsEntry 1 } rlPolicyPortPolicyStatisticsCntrType OBJECT-TYPE SYNTAX StatisticsCntrType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter type." ::= { rlPolicyPortPolicyStatisticsEntry 2 } rlPolicyPolicyStatisticsCntrSize OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits." ::= { rlPolicyPortPolicyStatisticsEntry 3 } rlPolicyPolicyStatisticsEnableCounting OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication whether the counter is enabled." DEFVAL { false } ::= { rlPolicyPortPolicyStatisticsEntry 4 } rlPolicyPolicyStatisticsCounterValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Counter value. " ::= { rlPolicyPortPolicyStatisticsEntry 5 } rlPolicyOutQueueStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyOutQueueStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence . Each of the above can a group off 'All'. The index is port represent by rlPolicyOutQueueStatisticsCountrID. In each entry there are fields representing whether the counter is enabled and counters value. " ::= { rlPolicyStatistics 2 } rlPolicyOutQueueStatisticsEntry OBJECT-TYPE SYNTAX RlPolicyOutQueueStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry includes port, vlan, queue, drop precedence and counter value." INDEX { rlPolicyOutQueueStatisticsCountrID } ::= { rlPolicyOutQueueStatisticsTable 1 } RlPolicyOutQueueStatisticsEntry::= SEQUENCE { rlPolicyOutQueueStatisticsCountrID INTEGER, rlPolicyOutQueueStatisticsIfIndexList PortList, rlPolicyOutQueueStatisticsPortAll TruthValue, rlPolicyOutQueueStatisticsVlan INTEGER, rlPolicyOutQueueStatisticsVlanAll TruthValue, rlPolicyOutQueueStatisticsQueue INTEGER, rlPolicyOutQueueStatisticsQueueAll TruthValue, rlPolicyOutQueueStatisticsDP StatisticsDPType, rlPolicyOutQueueStatisticsDPAll TruthValue, rlPolicyOutQueueStatisticsCounterTailDropValue Counter64, rlPolicyOutQueueStatisticsCounterAllValue Counter64, rlPolicyOutQueueStatisticsCntrNumOfBits StatisticsCntrNumOfBitsType, rlPolicyOutQueueStatisticsStatus RowStatus } rlPolicyOutQueueStatisticsCountrID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Counter id, the key of the table." ::= { rlPolicyOutQueueStatisticsEntry 1 } rlPolicyOutQueueStatisticsIfIndexList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Port for which the flow is counted." ::= { rlPolicyOutQueueStatisticsEntry 2 } rlPolicyOutQueueStatisticsPortAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication for whether the port is configured as range of all the ports" DEFVAL { false } ::= { rlPolicyOutQueueStatisticsEntry 3} rlPolicyOutQueueStatisticsVlan OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN for which the flow is counted." ::= { rlPolicyOutQueueStatisticsEntry 4 } rlPolicyOutQueueStatisticsVlanAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication for whether the Vlan is configured as range of all the Vlans" DEFVAL { false } ::= { rlPolicyOutQueueStatisticsEntry 5} rlPolicyOutQueueStatisticsQueue OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Queue for which the flow is counted." ::= { rlPolicyOutQueueStatisticsEntry 6 } rlPolicyOutQueueStatisticsQueueAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication for whether the Queue is configured as range of all the Queues" DEFVAL { false } ::= { rlPolicyOutQueueStatisticsEntry 7} rlPolicyOutQueueStatisticsDP OBJECT-TYPE SYNTAX StatisticsDPType MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Precedence for which the flow is counted." ::= { rlPolicyOutQueueStatisticsEntry 8 } rlPolicyOutQueueStatisticsDPAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication for whether the DP is configured as range of all the DPs" DEFVAL { false } ::= { rlPolicyOutQueueStatisticsEntry 9} rlPolicyOutQueueStatisticsCounterTailDropValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter for tail dropped value." ::= { rlPolicyOutQueueStatisticsEntry 10 } rlPolicyOutQueueStatisticsCounterAllValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter for all traffic value." ::= { rlPolicyOutQueueStatisticsEntry 11 } rlPolicyOutQueueStatisticsCntrNumOfBits OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits for the counter." ::= { rlPolicyOutQueueStatisticsEntry 12 } rlPolicyOutQueueStatisticsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlPolicyOutQueueStatisticsEntry 13 } -- Global Counter for statistics rlPolicyGlobalStatisticsCntrsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyGlobalStatisticsCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies statistics global counters for specific rules for all ports that they are connected to " ::= { rlPolicyStatistics 3 } rlPolicyGlobalStatisticsCntrsEntry OBJECT-TYPE SYNTAX RlPolicyGlobalStatisticsCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents global counter." INDEX {rlPolicyGlobalStatisticsCntrsType} ::= { rlPolicyGlobalStatisticsCntrsTable 1 } RlPolicyGlobalStatisticsCntrsEntry::= SEQUENCE { rlPolicyGlobalStatisticsCntrsType StatisticsCntrType, rlPolicyGlobalStatisticsCntrsNumOfBits StatisticsCntrNumOfBitsType, rlPolicyGlobalStatisticsCntrsCounterValue Counter64, rlPolicyGlobalStatisticsStatus RowStatus } rlPolicyGlobalStatisticsCntrsType OBJECT-TYPE SYNTAX StatisticsCntrType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter type." ::= { rlPolicyGlobalStatisticsCntrsEntry 1 } rlPolicyGlobalStatisticsCntrsNumOfBits OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits." ::= { rlPolicyGlobalStatisticsCntrsEntry 2 } rlPolicyGlobalStatisticsCntrsCounterValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter value." ::= { rlPolicyGlobalStatisticsCntrsEntry 3 } rlPolicyGlobalStatisticsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlPolicyGlobalStatisticsCntrsEntry 4 } -- clear scalar rlPolicyClearCounters OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This scalar indicates to clear all the counters." ::= { rlPolicyStatistics 4 } -- ******************** -- Classifier Utilization Table -- ******************** rlPolicyClassifierUtilization OBJECT IDENTIFIER ::= { rlPolicy 13 } rlPolicyClassifierUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyClassifierUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system." ::= { rlPolicyClassifierUtilization 1 } rlPolicyClassifierUtilizationEntry OBJECT-TYPE SYNTAX RlPolicyClassifierUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Single entry containing Classifier utilization information." INDEX { rlPolicyClassifierUtilizationUnitId } ::= { rlPolicyClassifierUtilizationTable 1 } RlPolicyClassifierUtilizationEntry ::= SEQUENCE { rlPolicyClassifierUtilizationUnitId Unsigned32, rlPolicyClassifierUtilizationPercent Unsigned32, rlPolicyClassifierUtilizationRulesNumber Unsigned32 } rlPolicyClassifierUtilizationUnitId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Unit ID of this Classifier. must be unique per entry. This is an index into the table." ::= { rlPolicyClassifierUtilizationEntry 1 } rlPolicyClassifierUtilizationPercent OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The classifier utilization percentage. " DEFVAL { 0 } ::= { rlPolicyClassifierUtilizationEntry 2 } rlPolicyClassifierUtilizationRulesNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The classifier utilization number of used rules, in short rules resolution." DEFVAL { 0 } ::= { rlPolicyClassifierUtilizationEntry 3 } -- reserved tcs scalar rlPolicyIsTCAvailable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This scalar indicates the number of currently reserved amount of traffic conditioners." ::= { rlPolicy 14 } rlPolicyCPUSafeGuardEnable OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This scalar enables/disables CPU Safeguard." ::= { rlPolicy 15 } rlPolicyQosModeGlobalCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPolicyQosModeGlobalCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode." ::= { rlPolicy 16 } rlPolicyQosModeGlobalCfgEntry OBJECT-TYPE SYNTAX RlPolicyQosModeGlobalCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current implemnetaion assumes only one entry exist." INDEX { rlPolicyGlobalIndex} ::= { rlPolicyQosModeGlobalCfgTable 1 } RlPolicyQosModeGlobalCfgEntry ::= SEQUENCE { rlPolicyGlobalIndex INTEGER, rlPolicyGlobalQoSMode RlPolicyQosMode, rlPolicyBasicGlobalTrustMode RlPolicyTrustTypes, rlPolicyAdvcGlobalTrustMode RlPolicyTrustTypes, rlPolicyPortTrustAdvancedMode TruthValue, rlPolicyDscpMutationEnable TruthValue, rlPolicyModeGlobalCfgStatus RowStatus } rlPolicyGlobalIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry index - currenly only one entry can exist, indexes hard coded with value '1'." ::= { rlPolicyQosModeGlobalCfgEntry 1 } rlPolicyGlobalQoSMode OBJECT-TYPE SYNTAX RlPolicyQosMode MAX-ACCESS read-write STATUS current DESCRIPTION "This field replaces deprecated scalar rlPolicyCliQosMode. Defines the global qos operation mode: disable, basic or advnaced. " ::= { rlPolicyQosModeGlobalCfgEntry 2 } rlPolicyBasicGlobalTrustMode OBJECT-TYPE SYNTAX RlPolicyTrustTypes MAX-ACCESS read-write STATUS current DESCRIPTION "This field replaces deprecated scalar rlPolicyCliBasicModeCfg. Defines the global qos trust operation mode when qos mode is basic. " ::= { rlPolicyQosModeGlobalCfgEntry 3 } rlPolicyAdvcGlobalTrustMode OBJECT-TYPE SYNTAX RlPolicyTrustTypes MAX-ACCESS read-write STATUS current DESCRIPTION "This field replaces deprecated scalar rlPolicyCliBasicModeCfg. Defines the global qos trust operation mode when qos mode is advanced. " ::= { rlPolicyQosModeGlobalCfgEntry 4 } rlPolicyPortTrustAdvancedMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode." DEFVAL{ false } ::= { rlPolicyQosModeGlobalCfgEntry 5 } rlPolicyDscpMutationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced) 2.if rlQosGlobalQoSMode is advanced then rlQoSPortTrustAdvancedMode must be set to true." DEFVAL{ false } ::= { rlPolicyQosModeGlobalCfgEntry 6} rlPolicyModeGlobalCfgStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable." ::= { rlPolicyQosModeGlobalCfgEntry 7 } END