CISCOSB-SNMP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    switch001                                   FROM CISCOSB-MIB
    OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Integer32     FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, DisplayString, AutonomousType      FROM SNMPv2-TC
    RowStatus, TruthValue, TimeInterval                    FROM SNMPv2-TC
    InetAddressType, InetAddress                FROM INET-ADDRESS-MIB
    snmpTargetAddrExtEntry                      FROM SNMP-COMMUNITY-MIB
    SnmpEngineID, SnmpAdminString                          FROM SNMP-FRAMEWORK-MIB
    usmUserEntry                                FROM SNMP-USER-BASED-SM-MIB;

rlSNMP MODULE-IDENTITY
          LAST-UPDATED "202105190000Z"
          ORGANIZATION "Cisco Systems, Inc."

          CONTACT-INFO
          "Postal: 170 West Tasman Drive
          San Jose , CA 95134-1706
          USA

          
          Website:  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

          DESCRIPTION
                  "Private MIB module for SNMP support in CISCOSB devices."
          REVISION "202105190000Z"
          DESCRIPTION
                  "Added support in usmUserTable augment for authentication and
                   privacy passwords saving."
          REVISION "201002150000Z"
          DESCRIPTION
                  "1. Changed SYNTAX of rlSnmpEngineID from
                      OCTET STRING (SIZE(5..32))to SnmpEngineID.
                   2. Added rlInet2EngineIdTable."
          REVISION "200709100000Z"
          DESCRIPTION
                  "Added rlEvents MIB."
          REVISION "200606060000Z"
          DESCRIPTION
                  "Added rlSNMPenable object."
          REVISION "0410200000Z"
          DESCRIPTION
                  "Initial version of this MIB."
          ::= { switch001 98 }

rlSNMPv3 OBJECT IDENTIFIER ::= { rlSNMP 1 }

rlTargetParamsTestingLevel OBJECT-TYPE
    SYNTAX  INTEGER  {
        low(1),
        high(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The level of the tests done when configuring an entry in the snmpTargetParamsTable."
    ::= { rlSNMPv3 1 }

rlNotifyFilterTestingLevel OBJECT-TYPE
    SYNTAX  INTEGER  {
        low(1),
        high(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The level of the tests done when configuring an entry in the snmpNotifyFilterTable."
    ::= { rlSNMPv3 2 }

rlSnmpEngineID OBJECT-TYPE
    SYNTAX  SnmpEngineID
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "A variable for setting the router's local engineID value.
         Setting this variable will effect the value of snmpEngineID. Setting this
         variable to the value '00 00 00 00 00'H will cause snmpEngineID to get
         an automatically created value based on the device basic MAC address.
         This method of setting the agent's engineID is recommended for stand-alone
         systems. Setting this variable to any other (valid) value will set snmpEngineID
         to this value. Setting this variable to all 'ff'H or all zeros is not
         allowed, with the exception of the value '00 00 00 00 00'H.
         The last method is recommended for stackable system, in order for the
         engineID to be unique within an administrative domain.
         Setting this value (to a value different then the default value)
         is required before configuring users data in usmUserTable and
         vacmSecurityToGroupTable.
         Changing the value of this variable has 2 side-effects:
         - All user data will be deleted, including: all usmUserTable configured entries and
           vacmSecurityToGroupTable entries  where vacmSecurityModel = 3.
         - All snmpCommunityTable entries with snmpCommunityContextEngineID value
           equal to old rlSnmpEngineID value, will be updated with the new
           rlSnmpEngineID value."
    DEFVAL      { '0000000001'H }
    ::= { rlSNMPv3 3 }

rlSNMPv3IpAddrToIndexTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlSNMPv3IpAddrToIndexEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "This table maps ip addresses to indices. The output index
     is used as a component in some SNMPv3 tables fields (for example:
     snmpTargetAddrName). Ipv4 addresses are not supported by this table.
     Note: in getNext operations on this table, only mappings which are in use
     in snmpTargetAddrTable (using rlTargetAddrMagicUsedInIndex) will be retreived.
     The mapped index does not include delimiters which are forbidden
     in SNMPv3 tag values (and thus can be used in tag fields). "
     ::= { rlSNMPv3 4 }

rlSNMPv3IpAddrToIndexEntry  OBJECT-TYPE
   SYNTAX RlSNMPv3IpAddrToIndexEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
       " The row definition for this table."
   INDEX { rlSNMPv3IpAddrToIndexAddrType,
           rlSNMPv3IpAddrToIndexAddr }
   ::= { rlSNMPv3IpAddrToIndexTable 1 }

RlSNMPv3IpAddrToIndexEntry ::= SEQUENCE {
       rlSNMPv3IpAddrToIndexAddrType        InetAddressType,
       rlSNMPv3IpAddrToIndexAddr            InetAddress,
       rlSNMPv3IpAddrToIndexMappedIndex     OCTET STRING
}

rlSNMPv3IpAddrToIndexAddrType OBJECT-TYPE
   SYNTAX InetAddressType
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "Type of NMS IP address."
     ::=  { rlSNMPv3IpAddrToIndexEntry 1 }

rlSNMPv3IpAddrToIndexAddr OBJECT-TYPE
   SYNTAX InetAddress
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "NMS IP address."
     ::=  { rlSNMPv3IpAddrToIndexEntry 2 }

rlSNMPv3IpAddrToIndexMappedIndex OBJECT-TYPE
   SYNTAX OCTET STRING (SIZE(4))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
    "The index mapped for this row ip address."
     ::=  { rlSNMPv3IpAddrToIndexEntry 3 }

rlTargetAddrExtTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlTargetAddrExtEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "This table extends rlTargetAddrExtEntry.  "
     ::= { rlSNMPv3 5 }

rlTargetAddrExtEntry  OBJECT-TYPE
   SYNTAX RlTargetAddrExtEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
       " The row definition for this table."
   AUGMENTS       { snmpTargetAddrExtEntry }
   ::= { rlTargetAddrExtTable 1 }

RlTargetAddrExtEntry ::= SEQUENCE {
       rlTargetAddrMagicUsedInIndex         OCTET STRING
}

rlTargetAddrMagicUsedInIndex OBJECT-TYPE
   SYNTAX OCTET STRING  (SIZE (0 | 4))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "Setting this field to a 4 octets length value means that ip mapping (using rlSNMPv3IpAddrToIndexTable)
     is used for this row. If such a mapping is not used, a 0-length octet string
     value should be used for this field (this is also the default).
     This field value is determined only once, upon creation of an entry in the
     snmpTargetAddrTable. A change in its value while updating an existing entry
     is ignored.
     Prior to creating a snmpTargetAddrTable entry with a 4 octets length value for
     this field, the rlSNMPv3IpAddrToIndexTable must be used in order to retrieve
     this value."
   DEFVAL  { "" }
     ::=  { rlTargetAddrExtEntry 1 }

rlInet2EngineIdTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlInet2EngineIdEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "This table maps inet addresses to SNMPv3 engine identifiers.  "
     ::= { rlSNMPv3 6 }

rlInet2EngineIdEntry  OBJECT-TYPE
   SYNTAX RlInet2EngineIdEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
       " The row definition for this table."
   INDEX       { rlInet2EngineIdAddressType,  rlInet2EngineIdAddress}
   ::= { rlInet2EngineIdTable 1 }

RlInet2EngineIdEntry ::= SEQUENCE {
       rlInet2EngineIdAddressType         InetAddressType,
       rlInet2EngineIdAddress             InetAddress,
       rlInet2EngineIdEngineId            SnmpEngineID,
       rlInet2EngineIdStatus              RowStatus
}

rlInet2EngineIdAddressType OBJECT-TYPE
   SYNTAX InetAddressType
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "Inet address type of the mapped inet address."
     ::=  { rlInet2EngineIdEntry 1 }

rlInet2EngineIdAddress OBJECT-TYPE
   SYNTAX InetAddress
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "Mapped inet address."
     ::=  { rlInet2EngineIdEntry 2 }

rlInet2EngineIdEngineId OBJECT-TYPE
   SYNTAX SnmpEngineID
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "The SNMPv3 engine id to which the address denoted by rlInet2EngineIdAddressType and rlInet2EngineIdAddress is mapped."
     ::=  { rlInet2EngineIdEntry 3 }

rlInet2EngineIdStatus  OBJECT-TYPE
   SYNTAX RowStatus
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "The management control for this table."
   DEFVAL      { createAndGo }
     ::=  { rlInet2EngineIdEntry 4 }


rlSNMPDomains OBJECT IDENTIFIER ::= { rlSNMP 2 }

rlSnmpUDPMridDomain  OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The SNMPv2 over UDP transport domain, used when Multi-Instance Router
             is supported (more than one MIR instance exist).
             The corresponding transport address is of type RlSnmpUDPMridAddress."
    ::= { rlSNMPDomains 1 }

RlSnmpUDPMridAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1d.1d.1d.1d/2d/2d"
    STATUS       current
    DESCRIPTION
            "Represents the UDP address of NMS and the MRID through which it is
             connected in order to access the agent:
               octets   contents        encoding
                1-4     IP-address      network-byte order
                5-6     UDP-port        network-byte order
                7-8     MRID            network-byte order
            "
    SYNTAX       OCTET STRING (SIZE (8))

rlSnmpUdpIpv6MridDomain OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
        "The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router
         is supported (more than one MIR instance exist).
         The corresponding transport address is of type RlSnmpUDPIpv6MridAddress
         for global IPv6 addresses."
    ::= { rlSNMPDomains 2 }

RlSnmpUDPIpv6MridAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x]0a:2d:2d"
    STATUS       current
    DESCRIPTION
            "Represents the UDP address of NMS and the MRID through which it is
             connected in order to access the agent:
               octets   contents        encoding
                1-16    IPv6 address    network-byte order
                17-18   UDP-port        network-byte order
                19-20   MRID            network-byte order      "
    SYNTAX       OCTET STRING (SIZE (20))

rlSnmpUdpIpv6zMridDomain OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
        "The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router
         is supported (more than one MIR instance exist).
         The corresponding transport address is of type RlSnmpUDPIpv6zMridAddress
         for scoped IPv6 addresses with a zone index."
    ::= { rlSNMPDomains 3 }

RlSnmpUDPIpv6zMridAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x%4d]0a:2d"
    STATUS      current
    DESCRIPTION
        "Represents the UDP address of NMS (consisting of an IPv6 address,
         a zone index and a port number) and the MRID through which it is
         connected in order to access the agent:
          octets       contents         encoding
           1-16        IPv6 address     network-byte order
          17-20        zone index       network-byte order
          21-22        UDP-port         network-byte order
          23-24        MRID             network-byte order        "
    SYNTAX      OCTET STRING (SIZE (24))


rlSnmpRequestMridTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlSnmpRequestMridEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "A table for determining the Mrid for the current SNMP request."
     ::= { rlSNMP 3 }

rlSnmpRequestMridEntry  OBJECT-TYPE
   SYNTAX RlSnmpRequestMridEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
       " The row definition for this table."
   INDEX { rlSnmpRequestManagedMrid }
   ::= { rlSnmpRequestMridTable 1 }

RlSnmpRequestMridEntry ::= SEQUENCE {
       rlSnmpRequestManagedMrid  INTEGER,
       rlSnmpRequestMridStatus   INTEGER                                  }

rlSnmpRequestManagedMrid OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
    "The router instance the NMS wants to manage in the current SNMP request.
     The value of this object, when attaching a variable instance of the
     rlSnmpRequestManagedMridTable to an SNMP request, will determine the
     managed Mrid for this request.
     It is important to mention that the variable insance must be attached
     as the first variable in the PDU in order to influence all variables."
     ::=  { rlSnmpRequestMridEntry 1 }

rlSnmpRequestMridStatus OBJECT-TYPE
   SYNTAX INTEGER {
    enable(1)
     }
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
    "The status of this entry."
    ::= { rlSnmpRequestMridEntry 2 }

rlSNMPenable OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enables or disables SNMP."
    DEFVAL      { enable }
    ::= { rlSNMP 4 }

rndCommunityInetTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RndCommunityInetEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "The community table of the agent"
     ::= { rlSNMP 5 }

rndCommunityInetEntry  OBJECT-TYPE
   SYNTAX RndCommunityInetEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
       " The row definition for this table."
   INDEX { rndCommunityInetMngStationAddrType, rndCommunityInetMngStationAddr,
           IMPLIED rndCommunityInetString }
   ::= { rndCommunityInetTable 1 }

RndCommunityInetEntry ::= SEQUENCE {
  rndCommunityInetMngStationAddrType InetAddressType,
  rndCommunityInetMngStationAddr     InetAddress,
  rndCommunityInetString             DisplayString,
  rndCommunityInetAccess             INTEGER,
  rndCommunityInetTrapsEnable        INTEGER,
  rndCommunityInetStatus             INTEGER,
  rndCommunityInetPortSecurity       INTEGER,
  rndCommunityInetOwner              DisplayString,
  rndCommunityInetTrapDestPort       INTEGER,
  rndCommunityInetAltAddrType        InetAddressType,
  rndCommunityInetAltAddr            InetAddress

}

rndCommunityInetMngStationAddrType OBJECT-TYPE
   SYNTAX InetAddressType
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "Address type of the management station that will be allowed to
    communicate with the agent IP address"
     ::=  { rndCommunityInetEntry 1 }


rndCommunityInetMngStationAddr OBJECT-TYPE
   SYNTAX InetAddress
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "Address of the management station that will be allowed to
    communicate with the agent IP address"
     ::=  { rndCommunityInetEntry 2 }

rndCommunityInetString OBJECT-TYPE
   SYNTAX DisplayString (SIZE(1..20))
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "The community string with which the management
     station will communicate with the agent"
     ::= { rndCommunityInetEntry 3 }

rndCommunityInetAccess OBJECT-TYPE
   SYNTAX INTEGER {
    readOnly(1),
    readWrite(2),
    super(3)
      }
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "The allowed access to this management station"
     ::= { rndCommunityInetEntry 4}

rndCommunityInetTrapsEnable OBJECT-TYPE
   SYNTAX INTEGER {
        snmpV1(1),
        snmpV2(2),
        snmpV3(3),
        trapsDisable(4)
   }
   MAX-ACCESS   read-create
   STATUS current
   DESCRIPTION
    "Should the agent send traps to the management station,
     and what version is required"
      ::= { rndCommunityInetEntry 5 }

rndCommunityInetStatus OBJECT-TYPE
   SYNTAX INTEGER {
    enable(1),
    invalid(2)
     }
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "The status of this entry. If the status is invalid the
    community entry will be deleted"
    ::= { rndCommunityInetEntry 6 }

rndCommunityInetPortSecurity OBJECT-TYPE
   SYNTAX INTEGER {
    enabled(1),
    disabled(2)
   }
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "If enabled the device will only receive SNMP messages from the port,
     through which this NMS is reachable from the device."
   DEFVAL { disabled }
   ::= { rndCommunityInetEntry 7 }

rndCommunityInetOwner OBJECT-TYPE
   SYNTAX DisplayString (SIZE(1..32))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "The owner of this community"
     ::= { rndCommunityInetEntry 8 }

rndCommunityInetTrapDestPort OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "The transport protocol (usually UDP) port to which traps to the
    management station represebted by this entry will be sent. The default
    is the well-known IANA assigned port number for SNMP traps.
    This object is relevant only if rndCommunityInetTrapsEnable has a value
    different from trapsDisable."
   DEFVAL { 162 }
   ::= { rndCommunityInetEntry 9 }

rndCommunityInetAltAddrType OBJECT-TYPE
   SYNTAX InetAddressType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "For testing purposes"
     ::=  { rndCommunityInetEntry 10 }


rndCommunityInetAltAddr OBJECT-TYPE
   SYNTAX InetAddress
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "For testing purposes"
     ::=  { rndCommunityInetEntry 11 }

rlMridInetTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlMridInetEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "The MRID related configurations table of the agent"
     ::= { rlSNMP 6 }

rlMridInetEntry  OBJECT-TYPE
   SYNTAX RlMridInetEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       " The row definition for this table."
   INDEX { rndCommunityInetMngStationAddrType, rndCommunityInetMngStationAddr,
           IMPLIED rndCommunityInetString }
   ::= { rlMridInetTable 1 }

RlMridInetEntry ::= SEQUENCE {
       rlMridInetConnection    INTEGER,
       rlInetManagedMrid       INTEGER
}

rlMridInetConnection OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
    "The router instance connecting the NMS who accessed the agent
     through the community table entry corresponding to the keys of this entry."
     ::=  { rlMridInetEntry 1 }

rlInetManagedMrid OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
    "The router instance currently managed by the NMS who accessed the agent
     through the community table entry corresponding to the keys of this entry "
     ::=  { rlMridInetEntry 2 }

rlEvents OBJECT IDENTIFIER ::= { rlSNMP 7 }

rlEventsPollerId OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
    " The rlEventsPollerId is the 1st key in all the rlEvents tables. Each poller must first GET from this
      object his Id. The agent will ensure uniqueness."
     ::=  { rlEvents 1 }

rlEventsDefaultPollingInterval OBJECT-TYPE
   SYNTAX TimeTicks
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
     "The default polling time. Will be used to detrermined whether the events configured by a poller in
      rlEventsTable can be destroyed, in absence of an entry for this poller in the rlEventsPollingControlTable."
::=  { rlEvents 2 }


rlEventsDeleteEvents OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
    " SETting a id of an active poller will cause all the rows of this poller in the rlEventsTable
      to be destroyed. This is equivalent to SETting rlEventsStatus of each row of this poller to 'destroy'.
      GET operation on this variable is meaningless, and the value 0 will be returned in this case (actual
      pollers start from 1)."
     ::=  { rlEvents 3 }


rlEventsMaskTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlEventsMaskEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "The table showing the events mask for each client."
     ::= { rlEvents 4 }

rlEventsMaskEntry  OBJECT-TYPE
   SYNTAX RlEventsMaskEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       " The row definition for this table."
   INDEX {  rlEventsMaskPollerId }
   ::= { rlEventsMaskTable 1 }


RlEventsMaskEntry ::= SEQUENCE {
       rlEventsMaskPollerId  INTEGER,
       rlEventsMaskMask      OCTET STRING
}

rlEventsMaskPollerId OBJECT-TYPE
   SYNTAX     INTEGER
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "The poller id whose events are shown in this table  "
     ::=  { rlEventsMaskEntry 1 }


rlEventsMaskMask OBJECT-TYPE
   SYNTAX OCTET STRING
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
    "The semantics of the rlEventsMask is an array of timestamps (each 4 octets
     containing one time stamp). Each timestamp is in TimeTicks units encoded in network order.
     Thus the mask can contain up to 40 timestamps. If a place in the array is empty it will contain
     0.
     Each timestamp shows the time of the last occurrence of the event whose
     rlEventIndexKey in the rlEventsTable for this client id is the same as its index in the array.
     Each for bytes of the rlEventsMask will contain the timestamp in TimeTicks
     units encoded in network order of the last time the event "
     ::=  { rlEventsMaskEntry 2 }

rlEventsTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlEventsEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "The table relating the events recorded to the indices in the rlEventsMask."
     ::= { rlEvents 5 }

rlEventsEntry  OBJECT-TYPE
   SYNTAX RlEventsEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       " The row definition for this table."
   INDEX { rlEventsPoller, IMPLIED rlEventId }
   ::= { rlEventsTable 1 }


RlEventsEntry ::= SEQUENCE {
       rlEventsPoller    INTEGER,
       rlEventId           OBJECT IDENTIFIER,
       rlEventIndexInMask  INTEGER,
       rlEventsStatus      RowStatus
}

rlEventsPoller OBJECT-TYPE
   SYNTAX     INTEGER
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "The poller id whose event definitions are shown in this table."
    ::= { rlEventsEntry 1 }

rlEventId OBJECT-TYPE
   SYNTAX     OBJECT IDENTIFIER
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "The event id of the polled event. This is the notification object identifier (in case of a
     SNMPV2 notification) or the translation to SNMPv2 notation of an SNMPv1 trap according to the RFC 3584
     (SNMP versions coexistence)."
     ::=  { rlEventsEntry 2 }

rlEventIndexInMask OBJECT-TYPE
   SYNTAX     INTEGER
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
    "Index in the rlEventsMaskMask of this poller id that has been allocated for this event by the device."
     ::=  { rlEventsEntry 3 }

rlEventsStatus OBJECT-TYPE
   SYNTAX     RowStatus
   MAX-ACCESS read-create
   STATUS     current
   DESCRIPTION
    "RowStatus for this table. Note that the device may refuse for resource shortage reasons to honour a create request
     for this poller even if apparently there still is room in his rlEventsMaskMask (i.e. the poller has requested
     monitoring of less than 40 events). "
     ::=  { rlEventsEntry 4 }


rlEventsPollingControlTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlEventsPollingControlEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "The polling control table for a poller. Currently contain only the polling interval."
     ::= { rlEvents 6 }

rlEventsPollingControlEntry  OBJECT-TYPE
   SYNTAX RlEventsPollingControlEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       " The row definition for this table."
   INDEX { rlEventsPollingControlPollerId }
   ::= { rlEventsPollingControlTable 1 }


RlEventsPollingControlEntry ::= SEQUENCE {
       rlEventsPollingControlPollerId            INTEGER,
       rlEventsPollingControlPollingInterval     TimeTicks
}

rlEventsPollingControlPollerId  OBJECT-TYPE
   SYNTAX     INTEGER
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "The poller id whose polling controls are shown in this table."
    ::= { rlEventsPollingControlEntry 1 }


rlEventsPollingControlPollingInterval OBJECT-TYPE
   SYNTAX     TimeTicks
   MAX-ACCESS read-create
   STATUS     current
   DESCRIPTION
    "The desired polling interval for this poller. If the device has determined that the poller has not
     polled the device for 3 times this polling interval it may destroy all the data related to this poller
     in the rlevents database "
     ::=  { rlEventsPollingControlEntry 2 }


rlUsmUserExtTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlUsmUserExtEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "This table extends usmUserEntry.  "
     ::= { rlSNMPv3 8 }

rlUsmUserExtEntry  OBJECT-TYPE
   SYNTAX RlUsmUserExtEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
       " The row definition for this table."
   AUGMENTS       { usmUserEntry }
   ::= { rlUsmUserExtTable 1 }

RlUsmUserExtEntry ::= SEQUENCE {
       rlUsmUserAuthPassword      DisplayString,
       rlUsmUserPrivPassword      DisplayString
}

rlUsmUserAuthPassword OBJECT-TYPE
   SYNTAX DisplayString  (SIZE (0..32))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "Authentication password.
     Setting the field to a non zero-length value will convert the given password
     to a localized authentication key, appropriate to the corresponding
     usmUserAuthProtocol field. The key is localized using the appropriate
     usmUserEngineID field, according to the algorithm specified in RFC 2574.
     This field may be set to a non zero-length value if the following conditions hold:
     1) This is the creation of the entry.
     2) The value of the corresponding usmUserCloneFrom field is zeroDotZero.
     Setting the field in any other case will cause no effect."
   DEFVAL  { "" }
     ::=  { rlUsmUserExtEntry 1 }


rlUsmUserPrivPassword OBJECT-TYPE
   SYNTAX DisplayString  (SIZE (0..32))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "Privacy password.
     Setting the field to a non zero-length value will convert the given password
     to a localized privacy key, appropriate to the corresponding
     usmUserAuthProtocol field. The key is localized using the appropriate
     usmUserEngineID field, according to the algorithm specified in RFC 2574.
     This field may be set to a non zero-length value if the following conditions hold:
     1) This is the creation of the entry.
     2) The value of the corresponding usmUserCloneFrom field is zeroDotZero.
     Setting the field in any other case will cause no effect."
   DEFVAL  { "" }
     ::=  { rlUsmUserExtEntry 2 }


rlSnmpClient OBJECT IDENTIFIER ::= { rlSNMP 8 }

rlSnmpClientAgentsTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlSnmpClientAgentsEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
    "This table maintains the user agents to which the SNMP client will send requests"
     ::= { rlSnmpClient 1 }

rlSnmpClientAgentsEntry  OBJECT-TYPE
   SYNTAX RlSnmpClientAgentsEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
       " The row definition for this table."
   INDEX { rlSnmpClientAgentsAddressType, rlSnmpClientAgentsAddress }
   ::= { rlSnmpClientAgentsTable 1 }

RlSnmpClientAgentsEntry ::= SEQUENCE {      
       rlSnmpClientAgentsAddressType   InetAddressType,
       rlSnmpClientAgentsAddress       InetAddress,
       rlSnmpClientAgentsCommunity     OCTET STRING,
       rlSnmpClientAgentsUsername      SnmpAdminString,
       rlSnmpClientAgentsAuthProtocol  AutonomousType,
       rlSnmpClientAgentsPrivProtocol  AutonomousType,
       rlSnmpClientAgentsAuthKey       OCTET STRING, 
       rlSnmpClientAgentsPrivKey       OCTET STRING, 
       rlSnmpClientAgentsTimeout       TimeInterval,
       rlSnmpClientAgentsRetries       Integer32,
       rlSnmpClientAgentsStatus        RowStatus
}

rlSnmpClientAgentsAddressType OBJECT-TYPE
   SYNTAX InetAddressType
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "Type of Remote Agent IP address."
     ::=  { rlSnmpClientAgentsEntry 1 }

rlSnmpClientAgentsAddress OBJECT-TYPE
   SYNTAX InetAddress
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "Remote Agent IP address."
     ::=  { rlSnmpClientAgentsEntry 2 }

rlSnmpClientAgentsCommunity OBJECT-TYPE
   SYNTAX OCTET STRING
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "Remote Agent SNMPv1/v2 community string. Either this field or rlSnmpClientAgentsUsername
     must be configured to a non-empty string."
   DEFVAL  { "" }
     ::=  { rlSnmpClientAgentsEntry 3 }

rlSnmpClientAgentsUsername OBJECT-TYPE
   SYNTAX SnmpAdminString (SIZE(0..32)) 
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "Remote Agent SNMPv3 username string."
   DEFVAL  { "" }
     ::=  { rlSnmpClientAgentsEntry 4 }

rlSnmpClientAgentsAuthProtocol OBJECT-TYPE
   SYNTAX AutonomousType  
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "Remote Agent SNMPv3 authentication protocol."
   DEFVAL      { usmNoAuthProtocol } 
     ::=  { rlSnmpClientAgentsEntry 5 }

rlSnmpClientAgentsPrivProtocol OBJECT-TYPE
   SYNTAX AutonomousType 
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "Remote Agent SNMPv3 privacy protocol."
   DEFVAL      { usmNoPrivProtocol } 
     ::=  { rlSnmpClientAgentsEntry 6 }

rlSnmpClientAgentsAuthKey OBJECT-TYPE
   SYNTAX OCTET STRING 
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "Remote Agent SNMPv3 authentication key. The key size should be consistent 
     with the chosen authentication protocol."
   DEFVAL  { "" }
     ::=  { rlSnmpClientAgentsEntry 7 }

rlSnmpClientAgentsPrivKey OBJECT-TYPE
   SYNTAX OCTET STRING 
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "Remote Agent SNMPv3 privacy key. The key size should be consistent 
     with the chosen privacy protocol." 
   DEFVAL  { "" }
     ::=  { rlSnmpClientAgentsEntry 8 }

rlSnmpClientAgentsTimeout OBJECT-TYPE
   SYNTAX TimeInterval 
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "The default timeout between 2 successive retries of sending SNMP requests to
     the agent. An application using the SNMP client may provide its own timeout
     value." 
   DEFVAL  { 1500 }
     ::=  { rlSnmpClientAgentsEntry 9 }

rlSnmpClientAgentsRetries OBJECT-TYPE
   SYNTAX Integer32 (0..255)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "The default number of retries the SNMP client should preform, in case no
     response is received from the agent. An application using the SNMP client
     may provide its own retries value. " 
   DEFVAL  { 3 }
     ::=  { rlSnmpClientAgentsEntry 10 }

rlSnmpClientAgentsStatus OBJECT-TYPE
   SYNTAX RowStatus 
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
    "The management control for this table."
   DEFVAL  { createAndGo }
     ::=  { rlSnmpClientAgentsEntry 11 }


END