CISCOSB-SYSMNG-MIB DEFINITIONS ::= BEGIN

-- Version:    7.50
-- Date:       31 Oct 2010
-- 31-Oct-2010 Added rlSysmngTcamAllocationsTable
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,Counter32,
    Unsigned32                                  FROM SNMPv2-SMI
    TruthValue, RowStatus, RowPointer,
    TEXTUAL-CONVENTION,DisplayString            FROM SNMPv2-TC
    Counter64, OBJECT-TYPE                      FROM SNMPv2-SMI
    Percents,switch001                          FROM CISCOSB-MIB;


rlSysmngMib MODULE-IDENTITY
        LAST-UPDATED "201010310000a"
        ORGANIZATION "Cisco Systems, Inc."

        CONTACT-INFO
        "Postal: 170 West Tasman Drive
        San Jose , CA 95134-1706
        USA

        
        Website:  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

        DESCRIPTION
             "The private MIB module definition for System Manager pool."
        REVISION "201010310000a"
        DESCRIPTION
             "Initial revision."
        ::= { switch001 204 }

SysmngResourceRouteType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Supported router resource types"
    SYNTAX  INTEGER {
        ipv4(1),
        ipv6(2),
        ipmv4(3),
        ipmv6(4),
        nonIp(5),
        ipv4Policy(6),
        ipv6Policy(7),
        vlanMapping(8),
        totalCount(9)
}

SysmngResourceRouteUsageType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Supported router resource usage types"
    SYNTAX  INTEGER {
        ipv4Neighbor(1),
        ipv4Address(2),
        ipv4Route(3),
        ipv6Neighbor(4),
        ipv6Address(5),
        ipv6OnlinkPrefix(6),
        ipv6Route(7),
        ipmv4Route(8),
        ipmv4RouteStarG(9),
        ipmv6Route(10),
        ipmv6RouteStarG(11),
        ipv4PolicyRoute(12),
        ipv6PolicyRoute(13),
        vlanMapping(14)
}

SysmngPoolType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Supported TCAM pools."
    SYNTAX  INTEGER {
        router(1),
        iscsi(2),
        voip(3),
        misc(4)           -- Miscellaneous pool - uses all TCAM entries that
                          --                      previous pools (Router/ISCSI)
                          --                      didn't reserved
}

-- System Manager Tcam Allocations Table

    rlSysmngTcamAllocations OBJECT IDENTIFIER
      ::= { rlSysmngMib 1 }

    rlSysmngTcamAllocationsTable OBJECT-TYPE
      SYNTAX         SEQUENCE OF RlSysmngTcamAllocationsEntry
      MAX-ACCESS     not-accessible
      STATUS         current
      DESCRIPTION
           "A table containing tcam allocations information.
           Each row represents objects for a defined profile."
      ::= { rlSysmngTcamAllocations 1 }

    rlSysmngTcamAllocationsEntry OBJECT-TYPE
      SYNTAX         RlSysmngTcamAllocationsEntry
      MAX-ACCESS     not-accessible
      STATUS         current
      DESCRIPTION
           "A Single entry containing tcam allocations information
            per predefined profile and specific pool."
      INDEX          { rlSysmngTcamAllocProfileName, rlSysmngTcamAllocPoolType }
      ::= { rlSysmngTcamAllocationsTable 1 }

    RlSysmngTcamAllocationsEntry ::= SEQUENCE {
      rlSysmngTcamAllocProfileName                          DisplayString,
      rlSysmngTcamAllocPoolType                             SysmngPoolType,

      rlSysmngTcamAllocMinRequiredEntries                   Unsigned32,
      rlSysmngTcamAllocStaticConfigEntries                  Unsigned32,
      rlSysmngTcamAllocInUseEntries                         Unsigned32,
      rlSysmngTcamAllocPoolSize                             Unsigned32
    }

     rlSysmngTcamAllocProfileName OBJECT-TYPE
      SYNTAX         DisplayString
      MAX-ACCESS     not-accessible
      STATUS         current
      DESCRIPTION
           "The profile name for tcam allocation.
            Must be unique per entry. This is an index into the table.
            'tcam0' profile contains policy tcam counters
            'tcam1' profile contains router tcam counters"
      ::= { rlSysmngTcamAllocationsEntry 1 }

    rlSysmngTcamAllocPoolType OBJECT-TYPE
      SYNTAX         SysmngPoolType
      MAX-ACCESS     not-accessible
      STATUS         current
      DESCRIPTION
           "Pool type.
            Must be unique per entry. This is an index into the table."
      ::= { rlSysmngTcamAllocationsEntry 2 }


   rlSysmngTcamAllocMinRequiredEntries OBJECT-TYPE
      SYNTAX         Unsigned32
      MAX-ACCESS     read-only
      STATUS         current
      DESCRIPTION
           "Number of minimal hardware entries, required by pool to operate."
      DEFVAL { 0 }
      ::= { rlSysmngTcamAllocationsEntry 3 }

    rlSysmngTcamAllocStaticConfigEntries OBJECT-TYPE
      SYNTAX         Unsigned32
      MAX-ACCESS     read-only
      STATUS         current
      DESCRIPTION
           "Number of hardware entries, in use by static configuration of the pool."
      DEFVAL { 0 }
      ::= { rlSysmngTcamAllocationsEntry 4 }

   rlSysmngTcamAllocInUseEntries OBJECT-TYPE
      SYNTAX         Unsigned32
      MAX-ACCESS     read-only
      STATUS         current
      DESCRIPTION
           "Total number of hardware entries, currently in use by the pool.
            This number includes minimum, static and dynamic entries."
      DEFVAL { 0 }
      ::= { rlSysmngTcamAllocationsEntry 5 }

   rlSysmngTcamAllocPoolSize OBJECT-TYPE
      SYNTAX         Unsigned32
      MAX-ACCESS     read-only
      STATUS         current
      DESCRIPTION
           "Total number of hardware entries reserved for the pool."
      DEFVAL { 0 }
      ::= { rlSysmngTcamAllocationsEntry 6 }

-- System Manager Router Resource Table

rlSysmngResource OBJECT IDENTIFIER
    ::= { rlSysmngMib 2 }

-- This is going to be deprecated and instead, rlSysmngResourcePerUnitTable
-- should be used
rlSysmngResourceTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF RlSysmngResourceEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "A read-only table for displaying router resources configuration,
        properties, and usage per resource."
    ::= { rlSysmngResource 1 }

rlSysmngResourceEntry OBJECT-TYPE
    SYNTAX         RlSysmngResourceEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "A Single entry containing specific router resource information."
    INDEX          { rlSysmngResourceRouteType }
    ::= { rlSysmngResourceTable 1 }

RlSysmngResourceEntry ::= SEQUENCE {
    rlSysmngResourceRouteType                       SysmngResourceRouteType,
    rlSysmngResourceCurrentUse                      Unsigned32,
    rlSysmngResourceCurrentUseHw                    Unsigned32,
    rlSysmngResourceCurrentMax                      Unsigned32,
    rlSysmngResourceCurrentMaxHw                    Unsigned32,
    rlSysmngResourceTemporaryMax                    Unsigned32,
    rlSysmngResourceTemporaryMaxHw                  Unsigned32,
    rlSysmngResourceCurrentNexthopMax               Unsigned32,
    rlSysmngResourceCurrentNexthopMaxHw             Unsigned32,
    rlSysmngResourceCurrentNexthopUse               Unsigned32,
    rlSysmngResourceCurrentNexthopUseHw             Unsigned32
}

rlSysmngResourceRouteType OBJECT-TYPE
    SYNTAX         SysmngResourceRouteType
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
       "Router resource type."
    ::= { rlSysmngResourceEntry 1 }

rlSysmngResourceCurrentUse OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "Currently in used number of routes."
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 2 }

rlSysmngResourceCurrentUseHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "Currently in used number of HW FFT entries"
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 3 }

rlSysmngResourceCurrentMax OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The running maximum supported number of routes."
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 4 }

rlSysmngResourceCurrentMaxHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The running maximum supported number of HW FFT entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 5 }

rlSysmngResourceTemporaryMax OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The temporary maximum supported number of routes."
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 6 }

rlSysmngResourceTemporaryMaxHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The temporary maximum supported number of HW FFT entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 7 }

rlSysmngResourceCurrentNexthopMax OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The maximum supported number of nexthop entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 8 }

rlSysmngResourceCurrentNexthopMaxHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The maximum supported number of HW nexthop entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 9 }

rlSysmngResourceCurrentNexthopUse OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The current number of nexthop entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 10 }

rlSysmngResourceCurrentNexthopUseHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The current number of HW nexthop entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourceEntry 11 }

-- System Manager Router Resource Action
rlSysmngRouterResourceAction OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "Router resource action."
    ::=  { rlSysmngMib 3 }

-- System Manager Router Resource Table

rlSysmngResourceUsage OBJECT IDENTIFIER
    ::= { rlSysmngMib 4 }

rlSysmngResourceUsageTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF RlSysmngResourceUsageEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "A read-only table for displaying router resources configuration,
        properties, and usage per resource."
    ::= { rlSysmngResourceUsage 1 }

rlSysmngResourceUsageEntry OBJECT-TYPE
    SYNTAX         RlSysmngResourceUsageEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "A Single entry containing specific router resource information."
    INDEX          { rlSysmngResourceUsageType }
    ::= { rlSysmngResourceUsageTable 1 }

RlSysmngResourceUsageEntry ::= SEQUENCE {
    rlSysmngResourceUsageType                       SysmngResourceRouteUsageType,
    rlSysmngResourceUsageNum                        Unsigned32
}

rlSysmngResourceUsageType OBJECT-TYPE
    SYNTAX         SysmngResourceRouteUsageType
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
       "Router resource type."
    ::= { rlSysmngResourceUsageEntry 1 }

rlSysmngResourceUsageNum OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "Currently in used."
    DEFVAL { 0 }
    ::= { rlSysmngResourceUsageEntry 2 }

rlSysmngResourcePerUnit OBJECT IDENTIFIER
    ::= { rlSysmngMib 5 }

-- This table should be used rlSysmngResourcePerUnitTable instead of
-- rlSysmngResourceTable
rlSysmngResourcePerUnitTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF RlSysmngResourcePerUnitEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "A read-only table for displaying router resources configuration,
        properties, and usage per resource."
    ::= { rlSysmngResourcePerUnit 1 }

rlSysmngResourcePerUnitEntry OBJECT-TYPE
    SYNTAX         RlSysmngResourcePerUnitEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "A Single entry containing specific router resource information."
    INDEX          { rlSysmngResourcePerUnitRouteType,
                     rlSysmngResourcePerUnitUnitId }
    ::= { rlSysmngResourcePerUnitTable 1 }

RlSysmngResourcePerUnitEntry ::= SEQUENCE {
    rlSysmngResourcePerUnitRouteType                    SysmngResourceRouteType,
    rlSysmngResourcePerUnitUnitId                       Unsigned32,
    rlSysmngResourcePerUnitCurrentUse                   Unsigned32,
    rlSysmngResourcePerUnitCurrentUseHw                 Unsigned32,
    rlSysmngResourcePerUnitCurrentMax                   Unsigned32,
    rlSysmngResourcePerUnitCurrentMaxHw                 Unsigned32,
    rlSysmngResourcePerUnitTemporaryMax                 Unsigned32,
    rlSysmngResourcePerUnitTemporaryMaxHw               Unsigned32,
    rlSysmngResourcePerUnitCurrentNexthopMax            Unsigned32,
    rlSysmngResourcePerUnitCurrentNexthopMaxHw          Unsigned32,
    rlSysmngResourcePerUnitCurrentNexthopUse            Unsigned32,
    rlSysmngResourcePerUnitCurrentNexthopUseHw          Unsigned32
}

rlSysmngResourcePerUnitRouteType OBJECT-TYPE
    SYNTAX         SysmngResourceRouteType
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
       "Router resource type."
    ::= { rlSysmngResourcePerUnitEntry 1 }

rlSysmngResourcePerUnitUnitId OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
       "Unit id. Zero value means system totals."
    ::= { rlSysmngResourcePerUnitEntry 2 }

rlSysmngResourcePerUnitCurrentUse OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "Currently in used number of routes."
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 3 }

rlSysmngResourcePerUnitCurrentUseHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "Currently in used number of HW FFT entries"
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 4 }

rlSysmngResourcePerUnitCurrentMax OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The running maximum supported number of routes."
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 5 }

rlSysmngResourcePerUnitCurrentMaxHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The running maximum supported number of HW FFT entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 6 }

rlSysmngResourcePerUnitTemporaryMax OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The temporary maximum supported number of routes."
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 7 }

rlSysmngResourcePerUnitTemporaryMaxHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The temporary maximum supported number of HW FFT entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 8 }

rlSysmngResourcePerUnitCurrentNexthopMax OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The maximum supported number of nexthop entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 9 }

rlSysmngResourcePerUnitCurrentNexthopMaxHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The maximum supported number of HW nexthop entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 10 }

rlSysmngResourcePerUnitCurrentNexthopUse OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The current number of nexthop entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 11 }

rlSysmngResourcePerUnitCurrentNexthopUseHw OBJECT-TYPE
    SYNTAX         Unsigned32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The current number of HW nexthop entries."
    DEFVAL { 0 }
    ::= { rlSysmngResourcePerUnitEntry 12 }

rlRouterHwReactivate  OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Router hardware reactivation action."
    DEFVAL      { 0 }
    ::=  { rlSysmngMib 6 }

rlRouterHwStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                  normal(1),
                  inRecovery(2),
                  suspended(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Router hardware active state."
    DEFVAL      { 1 }
    ::=  { rlSysmngMib 7 }
END