CISCOSB-TUNNEL-MIB DEFINITIONS ::= BEGIN IMPORTS switch001 FROM CISCOSB-MIB OBJECT-TYPE,Unsigned32, IpAddress, MODULE-IDENTITY FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC IANAtunnelType FROM IANAifType-MIB DnsName FROM DNS-SERVER-MIB tunnelIfEntry FROM TUNNEL-MIB ifIndex FROM IF-MIB; rlTunnel MODULE-IDENTITY LAST-UPDATED "201109120000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition for Tunneling." REVISION "201205210000Z" DESCRIPTION "Initial revision." ::= { switch001 122 } --- Deprecated implementation of ISATAP --- Deprecated implementation of ISATAP --- Deprecated implementation of ISATAP rlTunnelIsatapStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ISATAP status." DEFVAL { disable } ::= { rlTunnel 1 } rlTunnelIsatapRobustness OBJECT-TYPE SYNTAX Unsigned32 (1 .. 20) -- UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "specifies how many DNS Querys and Router Solicitations should be sent to get the corresponding reply." DEFVAL { 3 } ::= { rlTunnel 2 } rlTunnelIsatapDnsHostName OBJECT-TYPE SYNTAX DnsName MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The domain name for ISATAP." ::= { rlTunnel 3 } rlTunnelIsatapQueryInterval OBJECT-TYPE SYNTAX Unsigned32 (10 .. 3600) -- UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "specifies the time interval between sending of DNS Queries before receiving the first reply from the DNS Server." DEFVAL { 10 } ::= { rlTunnel 4 } rlTunnelIsatapRSInterval OBJECT-TYPE SYNTAX Unsigned32 (10 .. 3600) -- UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "specifies the time interval between sending of Router Solicitations before receiving the first reply from the ISATAP Router." DEFVAL { 10 } ::= { rlTunnel 5 } rlTunnelIsatapMinQueryInterval OBJECT-TYPE SYNTAX Unsigned32 (0 .. 3600) -- UNITS "seconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "specifies the minimum time interval between between successive queries of same advertising ISATAP interface." DEFVAL { 0 } ::= { rlTunnel 6 } rlTunnelIsatapMinRSInterval OBJECT-TYPE SYNTAX Unsigned32 (0 .. 3600) -- UNITS "seconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "specifies the minimum time between successive solicitations of the same advertising ISATAP interface." DEFVAL { 0 } ::= { rlTunnel 7 } rlTunnelIsatapRouterAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "specifies the IPv4 address of ISATAP Router." DEFVAL { 0 } ::= { rlTunnel 8 } rlTunnelIsatapLocalIPv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "specifies the IPv4 address currently used as IPv4 source address for ISATAP Tunnel." DEFVAL { 0 } ::= { rlTunnel 9 } --- End of deprecated implementation of ISATAP --- End of deprecated implementation of ISATAP --- End of deprecated implementation of ISATAP --- rlTunnelGeneral & rlTunnelTypeSpecific rlTunnelGeneral OBJECT IDENTIFIER ::= { rlTunnel 11 } --- tunnelIfTable augmentation rlTunnelIfTable OBJECT-TYPE SYNTAX SEQUENCE OF RlTunnelIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is parallel to tunnelIfTable, and is used to add/delete tunnel entries to/from that table. In addition it contains private objects." ::= { rlTunnelGeneral 1 } rlTunnelIfEntry OBJECT-TYPE SYNTAX RlTunnelIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional configuration parameters for a tunnel interface." AUGMENTS { tunnelIfEntry } ::= { rlTunnelIfTable 1 } RlTunnelIfEntry ::= SEQUENCE { rlTunnelIfEncapsMethod IANAtunnelType, rlTunnelIfLocalAddressSource INTEGER, rlTunnelIfLocalAddressInterfaceId Unsigned32, rlTunnelIfLocalIPv4Address IpAddress, rlTunnelIfStatus RowStatus } rlTunnelIfEncapsMethod OBJECT-TYPE SYNTAX IANAtunnelType MAX-ACCESS read-write STATUS current DESCRIPTION "The encapsulation method used by the tunnel. This field added since it is read-only in standard MIB." ::= { rlTunnelIfEntry 1 } rlTunnelIfLocalAddressSource OBJECT-TYPE SYNTAX INTEGER { configured(1), auto(2), interface(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the method of obtaining Local address for the tunnel interface. Configured - configured by user. Automatic - minimum IP address of the device. Interface - minimum IP address on user specified interface." DEFVAL { configured } ::= { rlTunnelIfEntry 2 } rlTunnelIfLocalAddressInterfaceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interface ID, used to determine Local address for tunnel interface if rlTunnelIfLocalAddressSource set to interface." DEFVAL { 0 } ::= { rlTunnelIfEntry 3 } rlTunnelIfLocalIPv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the IPv4 address currently used as IPv4 Local address for IPv6 over IPv4 Tunnel." DEFVAL { 0 } ::= { rlTunnelIfEntry 4 } rlTunnelIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { rlTunnelIfEntry 5 } --- End of --- rlTunnelTypeSpecific rlTunnelTypeSpecific OBJECT IDENTIFIER ::= { rlTunnel 12 } --- rlTunnelIsatap rlTunnelIsatap OBJECT IDENTIFIER ::= { rlTunnelTypeSpecific 1 } --- rlTunnelIsatapConfTable rlTunnelIsatapConfTable OBJECT-TYPE SYNTAX SEQUENCE OF RlTunnelIsatapConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ISATAP-specific configuration." ::= { rlTunnelIsatap 1 } rlTunnelIsatapConfEntry OBJECT-TYPE SYNTAX RlTunnelIsatapConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional configuration parameters for a tunnel interface." INDEX { ifIndex } ::= { rlTunnelIsatapConfTable 1 } RlTunnelIsatapConfEntry ::= SEQUENCE { rlTunnelIsatapConfDnsName OCTET STRING, rlTunnelIsatapConfRowStatus RowStatus } rlTunnelIsatapConfDnsName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "DNS name." DEFVAL { "ISATAP" } ::= { rlTunnelIsatapConfEntry 1 } rlTunnelIsatapConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { rlTunnelIsatapConfEntry 2 } --- End of --- rlTunnelIsatapPrlTable rlTunnelIsatapPrlTable OBJECT-TYPE SYNTAX SEQUENCE OF RlTunnelIsatapPrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ISATAP-specific configuration." ::= { rlTunnelIsatap 2 } rlTunnelIsatapPrlEntry OBJECT-TYPE SYNTAX RlTunnelIsatapPrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional configuration parameters for a tunnel interface." INDEX { rlTunnelIsatapPrlIfIndex, rlTunnelIsatapPrlPriority } ::= { rlTunnelIsatapPrlTable 1 } RlTunnelIsatapPrlEntry ::= SEQUENCE { rlTunnelIsatapPrlIfIndex Unsigned32, rlTunnelIsatapPrlPriority Unsigned32, rlTunnelIsatapPrlAddress IpAddress, rlTunnelIsatapPrlIsActive INTEGER } rlTunnelIsatapPrlIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the interface to which this PRL entry belongs." ::= { rlTunnelIsatapPrlEntry 1 } rlTunnelIsatapPrlPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the entry. Lower value - higher priority." ::= { rlTunnelIsatapPrlEntry 2 } rlTunnelIsatapPrlAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 address of the potential router." ::= { rlTunnelIsatapPrlEntry 3 } rlTunnelIsatapPrlIsActive OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the PRL entry is active (meaning it has an up to date RA)." ::= { rlTunnelIsatapPrlEntry 4 } --- End of rlTunnelIsatapPrlTable rlTunnelIsatapConfRSInterval OBJECT-TYPE SYNTAX Unsigned32 (10 .. 3600) -- UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the time interval between Router Solicitations prior to receiving the first reply from the ISATAP router." DEFVAL { 10 } ::= { rlTunnelIsatap 11 } rlTunnelIsatapConfRobustness OBJECT-TYPE SYNTAX Unsigned32 (1 .. 20) MAX-ACCESS read-write STATUS current DESCRIPTION "After a Router Advertisement was received, Router Solicitation messages are sent every Lifetime / (1 + Robustness) seconds, where Lifetime is the Lifetime advertised in the RA." DEFVAL { 3 } ::= { rlTunnelIsatap 12 } rlTunnelIPv6EndConfig OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate end of snmp configuration for IPv6. Can be removed, if mechanism for indicating end config per mib is added to SNMP." DEFVAL { 1 } ::= { rlTunnelTypeSpecific 2 } END