CISCOSB-rlFft DEFINITIONS ::= BEGIN -- Title: CISCOSB FFT Private Extension -- Version: 7.37.00.00 -- Date: 17 May 2004 IMPORTS switch001 FROM CISCOSB-MIB Unsigned32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI RowStatus, TruthValue, PhysAddress, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC InetAddress, InetAddressType, InetAddressPrefixLength FROM INET-ADDRESS-MIB; Percents ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies percents." SYNTAX INTEGER (0..100) NetNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies the network identification." SYNTAX OCTET STRING (SIZE(4)) --- --- rlIpFFT --- rlFFT MODULE-IDENTITY LAST-UPDATED "200406010000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition for switch001 Fast Forwarding Tables." REVISION "200406010000Z" DESCRIPTION "Initial version of this MIB." ::= { switch001 47 } rlIpFFT OBJECT IDENTIFIER ::= { rlFFT 1 } rlIpFftMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version, the current version is 1." ::= { rlIpFFT 1 } rlInetMaxFftNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of IP FFTs." ::= { rlIpFFT 2 } rlInetFftDynamicSupported OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether dynamic IP FFTs are supported." ::= { rlIpFFT 3 } rlInetFftSubnetSupported OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether subtable per IP subnet is supported." ::= { rlIpFFT 4 } rlIpFftUnknownAddrMsgUsed OBJECT-TYPE SYNTAX INTEGER { used (1), unused (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether the 3SW uses the unknown address message." ::= { rlIpFFT 5 } rlInetFftAgingTimeSupported OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether aging time is supported." ::= { rlIpFFT 6 } rlIpFftSrcAddrSupported OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether an IP subtable per station contains source IP address." ::= { rlIpFFT 7 } rlInetFftAgingTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The aging timeout in seconds." ::= { rlIpFFT 8 } rlIpFftRedBoundary OBJECT-TYPE SYNTAX Percents MAX-ACCESS read-write STATUS current DESCRIPTION "The red boundary in percents." ::= { rlIpFFT 9 } rlIpFftYellowBoundary OBJECT-TYPE SYNTAX Percents MAX-ACCESS read-write STATUS current DESCRIPTION "The yellow boundary in percents." ::= { rlIpFFT 10 } --rlIpFftPollingInterval OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The polling interval for dynamic IP FFTs support in seconds." -- ::= { rlIpFFT 11 } -- -- The IP FFT Number Routers Table -- rlInetFftNumTable OBJECT-TYPE SYNTAX SEQUENCE OF RlInetFftNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing routes' numbers of the IP SFFTs and IP NFFTs. " ::= { rlIpFFT 12 } rlInetFftNumEntry OBJECT-TYPE SYNTAX RlInetFftNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the containing routes' numbers of IP SFFT and IP NFFT " INDEX { rlInetFftNumIndex, rlInetFftNumAddressType } ::= { rlInetFftNumTable 1 } RlInetFftNumEntry ::= SEQUENCE { rlInetFftNumIndex INTEGER, rlInetFftNumAddressType InetAddressType, rlInetFftNumStnRoutesNumber INTEGER, rlInetFftNumSubRoutesNumber INTEGER, rlInetFftNumInetTomeRoutesNumber INTEGER } rlInetFftNumIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IP FFT. " ::= { rlInetFftNumEntry 1 } rlInetFftNumAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The inet address type that are contained in the IP SFFT. " ::= { rlInetFftNumEntry 2 } rlInetFftNumStnRoutesNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes that are contained in the IP SFFT. " ::= { rlInetFftNumEntry 3 } rlInetFftNumSubRoutesNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes that are contained in the IP NFFT. " ::= { rlInetFftNumEntry 4 } rlInetFftNumInetTomeRoutesNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes that are Inet To Me. " ::= { rlInetFftNumEntry 5 } -- -- The IP Fast Forwarding Table per station -- rlInetFftStnTable OBJECT-TYPE SYNTAX SEQUENCE OF RlInetFftStnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table contains IP Fast Forwarding information per station for IP datagrams. " ::= { rlIpFFT 13 } rlInetFftStnEntry OBJECT-TYPE SYNTAX RlInetFftStnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) contains the IP fast forwarding information for IP datagrams from a particular source and destination addresses." INDEX { rlInetFftStnIndex, rlInetFftStnMrid, rlInetFftStnDstInetAddressType, rlInetFftStnDstInetAddress } ::= { rlInetFftStnTable 1 } RlInetFftStnEntry ::= SEQUENCE { rlInetFftStnIndex INTEGER, rlInetFftStnMrid INTEGER, rlInetFftStnDstInetAddressType InetAddressType, rlInetFftStnDstInetAddress InetAddress, rlInetFftStnDstRouteInetPrefix InetAddressPrefixLength, rlInetFftStnDstInetAddrType INTEGER, rlInetFftStnDstMacAddress PhysAddress, rlInetFftStnSrcMacAddress PhysAddress, rlInetFftStnOutIfIndex INTEGER, rlInetFftStnVid INTEGER, rlInetFftStnTaggedMode INTEGER, rlInetFftStnAge INTEGER } rlInetFftStnIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IP FFT. " ::= { rlInetFftStnEntry 1 } rlInetFftStnMrid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The router's Instance Identifier in the SFFT. " ::= { rlInetFftStnEntry 2 } rlInetFftStnDstInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The Ip destination type for which this entry contains IP forwarding information." ::= { rlInetFftStnEntry 3 } rlInetFftStnDstInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP destination address for which this entry contains IP forwarding information." ::= { rlInetFftStnEntry 4 } rlInetFftStnDstRouteInetPrefix OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The IP destination prefix for which this entry contains IP forwarding information." ::= { rlInetFftStnEntry 5 } rlInetFftStnDstInetAddrType OBJECT-TYPE SYNTAX INTEGER { local (1), remote (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP destination address type. " ::= { rlInetFftStnEntry 6 } rlInetFftStnDstMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC destination address." ::= { rlInetFftStnEntry 7} rlInetFftStnSrcMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC source address." ::= { rlInetFftStnEntry 8 } rlInetFftStnOutIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex of output physical port." ::= { rlInetFftStnEntry 9 } rlInetFftStnVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The vid of the output port." ::= { rlInetFftStnEntry 10 } rlInetFftStnTaggedMode OBJECT-TYPE SYNTAX INTEGER { untagged (1), tagged (2), basedPortConfig (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value " ::= { rlInetFftStnEntry 11 } rlInetFftStnAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The age of the entry in seconds from the inserting." ::= { rlInetFftStnEntry 12 } -- -- The IP Fast Forwarding Table per subnet -- rlInetFftSubTable OBJECT-TYPE SYNTAX SEQUENCE OF RlInetFftSubEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing IP Fast Forwarding information per subnet for IP datagrams. " ::= { rlIpFFT 14 } rlInetFftSubEntry OBJECT-TYPE SYNTAX RlInetFftSubEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses." INDEX { rlInetFftSubMrid , rlInetFftSubDstInetSubnetType, rlInetFftSubDstInetSubnet, rlInetFftSubDstInetPrefix } ::= { rlInetFftSubTable 1 } RlInetFftSubEntry ::= SEQUENCE { rlInetFftSubMrid INTEGER, rlInetFftSubDstInetSubnetType InetAddressType, rlInetFftSubDstInetSubnet InetAddress, rlInetFftSubDstInetPrefix InetAddressPrefixLength, rlInetFftSubNextHopSetRefCount INTEGER, rlInetFftSubNextHopCount INTEGER, rlInetFftSubNextHopIfindex1 INTEGER, rlInetFftSubNextHopInetAddr1Type InetAddressType, rlInetFftSubNextHopInetAddr1 InetAddress, rlInetFftSubNextHopIfindex2 INTEGER, rlInetFftSubNextHopInetAddr2Type InetAddressType, rlInetFftSubNextHopInetAddr2 InetAddress, rlInetFftSubNextHopIfindex3 INTEGER, rlInetFftSubNextHopInetAddr3Type InetAddressType, rlInetFftSubNextHopInetAddr3 InetAddress, rlInetFftSubNextHopIfindex4 INTEGER, rlInetFftSubNextHopInetAddr4Type InetAddressType, rlInetFftSubNextHopInetAddr4 InetAddress, rlInetFftSubNextHopIfindex5 INTEGER, rlInetFftSubNextHopInetAddr5Type InetAddressType, rlInetFftSubNextHopInetAddr5 InetAddress, rlInetFftSubNextHopIfindex6 INTEGER, rlInetFftSubNextHopInetAddr6Type InetAddressType, rlInetFftSubNextHopInetAddr6 InetAddress, rlInetFftSubNextHopIfindex7 INTEGER, rlInetFftSubNextHopInetAddr7Type InetAddressType, rlInetFftSubNextHopInetAddr7 InetAddress, rlInetFftSubNextHopIfindex8 INTEGER, rlInetFftSubNextHopInetAddr8Type InetAddressType, rlInetFftSubNextHopInetAddr8 InetAddress, rlInetFftSubAge INTEGER } rlInetFftSubMrid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The router's Instance Identifier in the NFFT. " ::= { rlInetFftSubEntry 1 } rlInetFftSubDstInetSubnetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IP destination subnet type for which this entry contains IP forwarding information." ::= { rlInetFftSubEntry 2 } rlInetFftSubDstInetSubnet OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP destination subnet for which this entry contains IP forwarding information." ::= { rlInetFftSubEntry 3 } rlInetFftSubDstInetPrefix OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The IP destination prefix for which this entry contains IP forwarding information." ::= { rlInetFftSubEntry 4 } rlInetFftSubNextHopSetRefCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of NFFT entries that used the given NextHop set (ECMP path). " ::= { rlInetFftSubEntry 5 } rlInetFftSubNextHopCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 6 } rlInetFftSubNextHopIfindex1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 7 } rlInetFftSubNextHopInetAddr1Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 8 } rlInetFftSubNextHopInetAddr1 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 9 } rlInetFftSubNextHopIfindex2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 10 } rlInetFftSubNextHopInetAddr2Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 11 } rlInetFftSubNextHopInetAddr2 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 12 } rlInetFftSubNextHopIfindex3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 13 } rlInetFftSubNextHopInetAddr3Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 14 } rlInetFftSubNextHopInetAddr3 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 15 } rlInetFftSubNextHopIfindex4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 16 } rlInetFftSubNextHopInetAddr4Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 17 } rlInetFftSubNextHopInetAddr4 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 18 } rlInetFftSubNextHopIfindex5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 19 } rlInetFftSubNextHopInetAddr5Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 20 } rlInetFftSubNextHopInetAddr5 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 21 } rlInetFftSubNextHopIfindex6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 22 } rlInetFftSubNextHopInetAddr6Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 23 } rlInetFftSubNextHopInetAddr6 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 24 } rlInetFftSubNextHopIfindex7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 25 } rlInetFftSubNextHopInetAddr7Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 26 } rlInetFftSubNextHopInetAddr7 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 27 } rlInetFftSubNextHopIfindex8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 28 } rlInetFftSubNextHopInetAddr8Type OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 29 } rlInetFftSubNextHopInetAddr8 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. " ::= { rlInetFftSubEntry 30 } rlInetFftSubAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The age of the entry in seconds from the inserting." ::= { rlInetFftSubEntry 31 } -- -- The IP FFT Counters Table -- rlInetFftCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF RlInetFftCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing IP Counters information per one IP FFT." ::= { rlIpFFT 15 } rlInetFftCountersEntry OBJECT-TYPE SYNTAX RlInetFftCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the IP Counters information containing amount of IP datagrams passed by certain IP FFT." INDEX { rlInetFftCountersIndex } ::= { rlInetFftCountersTable 1 } RlInetFftCountersEntry ::= SEQUENCE { rlInetFftCountersIndex INTEGER, rlInetFftInReceives INTEGER, rlInetFftForwDatagrams INTEGER, rlInetFftInDiscards INTEGER } rlInetFftCountersIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IP FFT." ::= { rlInetFftCountersEntry 1 } rlInetFftInReceives OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of received IP datagrams " ::= { rlInetFftCountersEntry 2 } rlInetFftForwDatagrams OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of forwarded IP datagrams " ::= { rlInetFftCountersEntry 3 } rlInetFftInDiscards OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of discarded IP datagrams " ::= { rlInetFftCountersEntry 4 } -- -- The IP NextHop Table (used by NFFT and Remote SFFT) -- rlInetFftNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF RlInetFftNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table contains NextHop information used for routing IP datagrams. " ::= { rlIpFFT 16 } rlInetFftNextHopEntry OBJECT-TYPE SYNTAX RlInetFftNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) contains the NextHop info information for routing IP datagrams." INDEX { rlInetFftNextHopifindex, rlInetFftNextHopInetAddressType, rlInetFftNextHopInetAddress} ::= { rlInetFftNextHopTable 1 } RlInetFftNextHopEntry ::= SEQUENCE { rlInetFftNextHopifindex INTEGER, rlInetFftNextHopInetAddressType InetAddressType, rlInetFftNextHopInetAddress InetAddress, rlInetFftNextHopValid INTEGER, rlInetFftNextHopType INTEGER, rlInetFftNextHopReferenceCount INTEGER, rlInetFftNextHopNetAddress PhysAddress, rlInetFftNextHopVid INTEGER, rlInetFftNextHopMacAddress PhysAddress, rlInetFftNextHopOutIfIndex INTEGER } rlInetFftNextHopifindex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the IP Interface index of the NextHop. " ::= { rlInetFftNextHopEntry 1 } rlInetFftNextHopInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address type of a NextHop for which an entry contains IP forwarding information. " ::= { rlInetFftNextHopEntry 2 } rlInetFftNextHopInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a NextHop for which an entry contains IP forwarding information. " ::= { rlInetFftNextHopEntry 3 } rlInetFftNextHopValid OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The NextHop Valid bit. When L2 info is missing, a NextHop has Invalid value. " ::= { rlInetFftNextHopEntry 4 } rlInetFftNextHopType OBJECT-TYPE SYNTAX INTEGER { local (1), remote (2), reject (3), drop (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The NextHop type. " ::= { rlInetFftNextHopEntry 5 } rlInetFftNextHopReferenceCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "IF LPM is supported: If ecmp supported: the field NextHop_ref_count used to save number of NextHop SETs that use the NextHop. Otherwise, NextHop_ref_count used to save number of NFFT entries that use the NextHop. IF LPM is NOT supported: NextHop_ref_count used to save number of Remote SFFT entries that use the NextHop. " ::= { rlInetFftNextHopEntry 6 } rlInetFftNextHopNetAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The NextHop Physical Address." ::= { rlInetFftNextHopEntry 7 } rlInetFftNextHopVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The vid of the output port." ::= { rlInetFftNextHopEntry 8 } rlInetFftNextHopMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC destination address." ::= { rlInetFftNextHopEntry 9} rlInetFftNextHopOutIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex of output physical port." ::= { rlInetFftNextHopEntry 10 } -- -- The L2 info Table (used by NextHop and Direct SFFT) -- rlInetFftL2InfoTable OBJECT-TYPE SYNTAX SEQUENCE OF RlInetFftL2InfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table contains L2 information used for routing IP datagrams. " ::= { rlIpFFT 17 } rlInetFftL2InfoEntry OBJECT-TYPE SYNTAX RlInetFftL2InfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) contains the L2 info information for routing IP datagrams." INDEX { rlInetFftL2InfoIfindex, rlInetFftL2InfoDstMacAddress } ::= { rlInetFftL2InfoTable 1 } RlInetFftL2InfoEntry ::= SEQUENCE { rlInetFftL2InfoIfindex INTEGER, rlInetFftL2InfoDstMacAddress PhysAddress, rlInetFftL2InfoValid INTEGER, rlInetFftL2InfoType INTEGER, rlInetFftL2InfoReferenceCount INTEGER, rlInetFftL2InfoVid INTEGER, rlInetFftL2InfoSrcMacAddress PhysAddress, rlInetFftL2InfoOutIfIndex INTEGER, rlInetFftL2InfoTaggedMode INTEGER } rlInetFftL2InfoIfindex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN Ifindex of the destination port. " ::= { rlInetFftL2InfoEntry 1 } rlInetFftL2InfoDstMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC destination address." ::= { rlInetFftL2InfoEntry 2} rlInetFftL2InfoValid OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The L2 info entry valid bit. When L2 info is missing some information, an L2 info has Invalid value. " ::= { rlInetFftL2InfoEntry 3 } rlInetFftL2InfoType OBJECT-TYPE SYNTAX INTEGER { other (1), vlan (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The L2 info type. With Enthernet media l2 info type is vlan. WIth Tunneling feature, l2 info type will be expanded. " ::= { rlInetFftL2InfoEntry 4 } rlInetFftL2InfoReferenceCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The reference count contains a number of NextHop entries that use this L2 info." ::= { rlInetFftL2InfoEntry 5 } rlInetFftL2InfoVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The vid of the destination port. " ::= { rlInetFftL2InfoEntry 6 } rlInetFftL2InfoSrcMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC source address placed to Ehernet Header of IP forwarded packet." ::= { rlInetFftL2InfoEntry 7} rlInetFftL2InfoOutIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex of output physical port the packet is forwarded through." ::= { rlInetFftL2InfoEntry 8 } rlInetFftL2InfoTaggedMode OBJECT-TYPE SYNTAX INTEGER { untagged (1), tagged (2), basedPortConfig (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field get the BasedPortConfig value." ::= { rlInetFftL2InfoEntry 9 } rlIpv6FftRedBoundary OBJECT-TYPE SYNTAX Percents MAX-ACCESS read-write STATUS current DESCRIPTION "The red boundary in percents." ::= { rlIpFFT 18 } rlIpv6FftYellowBoundary OBJECT-TYPE SYNTAX Percents MAX-ACCESS read-write STATUS current DESCRIPTION "The yellow boundary in percents." ::= { rlIpFFT 19 } --- --- rlIpxFFT --- rlIpxFFT OBJECT IDENTIFIER ::= { rlFFT 2 } rlIpxFftMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version, the current version is 1." ::= { rlIpxFFT 1 } rlIpxMaxFftNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximun number of IPX FFTs. An IPX FFT gets a number from 1 until rlIpxMaxFftSetNumber." ::= { rlIpxFFT 2 } rlIpxFftDynamicSupported OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether dynamic IPX FFTs are supported." ::= { rlIpxFFT 3 } rlIpxFftNetworkSupported OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether subtable per IPX network is supported." ::= { rlIpxFFT 4 } rlIpxFftUnknownAddrMsgUsed OBJECT-TYPE SYNTAX INTEGER { used (1), unused (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether the 3SW uses the unknown address message." ::= { rlIpxFFT 5 } rlIpxFftAgingTimeSupported OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether aging time is supported for subtable per station." ::= { rlIpxFFT 6 } rlIpxFftSrcAddrSupported OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether an IPX subtable per station contains source IPX address." ::= { rlIpxFFT 7 } rlIpxFftAgingTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The aging timeout in seconds." ::= { rlIpxFFT 8 } rlIpxFftRedBoundary OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The red boundary in percents." ::= { rlIpxFFT 9 } rlIpxFftYellowBoundary OBJECT-TYPE SYNTAX Percents MAX-ACCESS read-write STATUS current DESCRIPTION "The yellow boundary in percents." ::= { rlIpxFFT 10 } --rlIpxFftPollingInterval OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The polling interval for dynamic IPX FFTs support in seconds." -- ::= { rlIpxFFT 11 } -- -- The IPX FFT Number Routers Table -- rlIpxFftNumTable OBJECT-TYPE SYNTAX SEQUENCE OF RlIpxFftNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing number routes of the IPX Fast Forwarding Table. " ::= { rlIpxFFT 12 } rlIpxFftNumEntry OBJECT-TYPE SYNTAX RlIpxFftNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the containing number routes of of IPX SFFT and IPX NFFT " INDEX { rlIpxFftNumIndex } ::= { rlIpxFftNumTable 1 } RlIpxFftNumEntry ::= SEQUENCE { rlIpxFftNumIndex INTEGER, rlIpxFftNumStnRoutesNumber INTEGER, rlIpxFftNumSubRoutesNumber INTEGER } rlIpxFftNumIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IPX FFT. " ::= { rlIpxFftNumEntry 1 } rlIpxFftNumStnRoutesNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes containing in the IPX SFFT. " ::= { rlIpxFftNumEntry 2 } rlIpxFftNumSubRoutesNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes containing in the IPX NFFT. " ::= { rlIpxFftNumEntry 3 } -- -- The IPX Fast Forwarding Table per station -- rlIpxFftStnTable OBJECT-TYPE SYNTAX SEQUENCE OF RlIpxFftStnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing IPX Fast Forwarding information per station for IPX. " ::= { rlIpxFFT 13 } rlIpxFftStnEntry OBJECT-TYPE SYNTAX RlIpxFftStnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses." INDEX { rlIpxFftStnIndex, rlIpxFftStnDstNetid, rlIpxFftStnDstNode, rlIpxFftStnSrcNetid, rlIpxFftStnSrcNode } ::= { rlIpxFftStnTable 1 } RlIpxFftStnEntry ::= SEQUENCE { rlIpxFftStnIndex INTEGER, rlIpxFftStnDstNetid NetNumber, rlIpxFftStnDstNode PhysAddress, rlIpxFftStnSrcNetid NetNumber, rlIpxFftStnSrcNode PhysAddress, rlIpxFftStnDstIpxAddrType INTEGER, rlIpxFftStnEncapsulation INTEGER, rlIpxFftStnDstMacAddress PhysAddress, rlIpxFftStnSrcMacAddress PhysAddress, rlIpxFftStnOutIfIndex INTEGER, rlIpxFftStnTci INTEGER, rlIpxFftStnFacsIndex INTEGER, rlIpxFftStnAge INTEGER } rlIpxFftStnIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IPX FFT. " ::= { rlIpxFftStnEntry 1 } rlIpxFftStnDstNetid OBJECT-TYPE SYNTAX NetNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The destination network for which this entry contains IPX forwarding information." ::= { rlIpxFftStnEntry 2 } rlIpxFftStnDstNode OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination node for which this entry contains IPX forwarding information." ::= { rlIpxFftStnEntry 3 } rlIpxFftStnSrcNetid OBJECT-TYPE SYNTAX NetNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The source network for which this entry contains IPX forwarding information." ::= { rlIpxFftStnEntry 4 } rlIpxFftStnSrcNode OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination node for which this entry contains IPX forwarding information." ::= { rlIpxFftStnEntry 5 } rlIpxFftStnDstIpxAddrType OBJECT-TYPE SYNTAX INTEGER { local (1), remote (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address type. " ::= { rlIpxFftStnEntry 6 } rlIpxFftStnEncapsulation OBJECT-TYPE SYNTAX INTEGER { novell(1), ethernet(2), llc(3), snap(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The encapsulation method associated with this route." ::= { rlIpxFftStnEntry 7 } rlIpxFftStnDstMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC destination address." ::= { rlIpxFftStnEntry 8 } rlIpxFftStnSrcMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC source address." ::= { rlIpxFftStnEntry 9 } rlIpxFftStnOutIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex of output physical port." ::= { rlIpxFftStnEntry 10 } rlIpxFftStnTci OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of TCI or 0." ::= { rlIpxFftStnEntry 11 } rlIpxFftStnFacsIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of index of the FACS Table." ::= { rlIpxFftStnEntry 12 } rlIpxFftStnAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The age of the entry in seconds." ::= { rlIpxFftStnEntry 13 } -- -- The IPX Fast Forwarding Table per network -- rlIpxFftSubTable OBJECT-TYPE SYNTAX SEQUENCE OF RlIpxFftSubEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing IPX Fast Forwarding information per network for IPX . " ::= { rlIpxFFT 14 } rlIpxFftSubEntry OBJECT-TYPE SYNTAX RlIpxFftSubEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses." INDEX { rlIpxFftSubIndex, rlIpxFftSubDstNetid } ::= { rlIpxFftSubTable 1 } RlIpxFftSubEntry ::= SEQUENCE { rlIpxFftSubIndex INTEGER, rlIpxFftSubDstNetid NetNumber, rlIpxFftSubEncapsulation INTEGER, rlIpxFftSubDstMacAddress PhysAddress, rlIpxFftSubSrcMacAddress PhysAddress, rlIpxFftSubOutIfIndex INTEGER, rlIpxFftSubTci INTEGER, rlIpxFftSubFacsIndex INTEGER, rlIpxFftSubAge INTEGER } rlIpxFftSubIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IPX FFT. " ::= { rlIpxFftSubEntry 1 } rlIpxFftSubDstNetid OBJECT-TYPE SYNTAX NetNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The destination network for which this entry contains IPX forwarding information." ::= { rlIpxFftSubEntry 2 } rlIpxFftSubEncapsulation OBJECT-TYPE SYNTAX INTEGER { novell(1), ethernet(2), llc(3), snap(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The encapsulation method associated with this route." ::= { rlIpxFftSubEntry 3 } rlIpxFftSubDstMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC destination address." ::= { rlIpxFftSubEntry 4 } rlIpxFftSubSrcMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC source address." ::= { rlIpxFftSubEntry 5 } rlIpxFftSubOutIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex of output physical port." ::= { rlIpxFftSubEntry 6 } rlIpxFftSubTci OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of TCI or 0." ::= { rlIpxFftSubEntry 7 } rlIpxFftSubFacsIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of index of the FACS Table." ::= { rlIpxFftSubEntry 8 } rlIpxFftSubAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The age of the entry in seconds." ::= { rlIpxFftSubEntry 9 } -- -- The IPX FFT Counters Table -- rlIpxFftCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF RlIpxFftCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing IPX Counters information per one IPX FFT." ::= { rlIpxFFT 15 } rlIpxFftCountersEntry OBJECT-TYPE SYNTAX RlIpxFftCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the IP Counters information containing amount of IPX datagrams passed by certain IPX FFT." INDEX { rlIpxFftCountersIndex } ::= { rlIpxFftCountersTable 1 } RlIpxFftCountersEntry ::= SEQUENCE { rlIpxFftCountersIndex INTEGER, rlIpxFftInReceives INTEGER, rlIpxFftForwDatagrams INTEGER, rlIpxFftInDiscards INTEGER } rlIpxFftCountersIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IPX FFT." ::= { rlIpxFftCountersEntry 1 } rlIpxFftInReceives OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of received IPX datagrams " ::= { rlIpxFftCountersEntry 2 } rlIpxFftForwDatagrams OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of forwarded IPX datagrams " ::= { rlIpxFftCountersEntry 3 } rlIpxFftInDiscards OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of discarded IPX datagrams " ::= { rlIpxFftCountersEntry 4 } --- --- rlIpmFFT --- rlIpmFFT OBJECT IDENTIFIER ::= { rlFFT 3 } rlIpmFftMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version, the current version is 1." ::= { rlIpmFFT 1 } rlIpmMaxFftNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximun number of IPM FFTs. NT_IPM gets a number from Host Parameters" ::= { rlIpmFFT 2 } rlIpmFftDynamicSupported OBJECT-TYPE SYNTAX INTEGER { supported (1), unsupported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether dynamic IPM FFTs are supported. An NT_IPM gets a number from Host Parameters" ::= { rlIpmFFT 3 } rlIpmFftUnknownAddrMsgUsed OBJECT-TYPE SYNTAX INTEGER { used (1), unused (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether the 3SW uses the unknown address message. An NT_IPM gets a number from Host Parameters" ::= { rlIpmFFT 4 } rlIpmFftUserAgingTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The aging timeout in seconds. SNMP user writes. There is a default value of aging timeout." ::= { rlIpmFFT 5 } rlIpmFftRouterAgingTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The aging timeout in seconds. NT_IPM keeps value that Router level gave. This is high priority value for aging timeout." ::= { rlIpmFFT 6 } --rlIpmFftPollingInterval OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The polling interval for dynamic IPM FFT's support in seconds." -- ::= { rlIpmFFT 7 } -- -- The IPM FFT Number Routers Table -- rlIpmFftNumTable OBJECT-TYPE SYNTAX SEQUENCE OF RlIpmFftNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing number routes of the IPM Fast Forwarding Table. " ::= { rlIpmFFT 8 } rlIpmFftNumEntry OBJECT-TYPE SYNTAX RlIpmFftNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the containing number routes of an IPM FFT." INDEX { rlIpmFftNumIndex } ::= { rlIpmFftNumTable 1 } RlIpmFftNumEntry ::= SEQUENCE { rlIpmFftNumIndex INTEGER, rlIpmFftNumRoutesNumber INTEGER } rlIpmFftNumIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IPM FFT." ::= { rlIpmFftNumEntry 1 } rlIpmFftNumRoutesNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes containing in the IPM FFT." ::= { rlIpmFftNumEntry 2 } -- -- The IPM Fast Forwarding Table -- rlIpmFftTable OBJECT-TYPE SYNTAX SEQUENCE OF RlIpmFftEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing IPM Fast Forwarding information for IPM datagrams." ::= { rlIpmFFT 9 } rlIpmFftEntry OBJECT-TYPE SYNTAX RlIpmFftEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the IPM fast forwarding information for IP datagrams from a particular source and destination addresses." INDEX { rlIpmFftIndex, rlIpmFftSrcIpAddress, rlIpmFftDstIpAddress } ::= { rlIpmFftTable 1 } RlIpmFftEntry ::= SEQUENCE { rlIpmFftIndex INTEGER, rlIpmFftSrcIpAddress IpAddress, rlIpmFftDstIpAddress IpAddress, rlIpmFftSrcIpMask IpAddress, rlIpmFftInputIfIndex INTEGER, rlIpmFftInputVlanTag INTEGER, rlIpmFftForwardAction INTEGER, rlIpmFftInportAction INTEGER, rlIpmFftAge INTEGER } rlIpmFftIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IPM FFT. " ::= { rlIpmFftEntry 1 } rlIpmFftSrcIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP source address for which this entry contains IPM forwarding information." ::= { rlIpmFftEntry 2 } rlIpmFftDstIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPM destination address for which this entry contains IPM forwarding information." ::= { rlIpmFftEntry 3 } rlIpmFftSrcIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP source mask for which this entry contains IP forwarding information." ::= { rlIpmFftEntry 4 } rlIpmFftInputIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The input ifIndex for which this entry contains IPM forwarding information." ::= { rlIpmFftEntry 5 } rlIpmFftInputVlanTag OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The input Vlan tag together with input ifIndex defines pair (ifIndex, tag)" ::= { rlIpmFftEntry 6 } rlIpmFftForwardAction OBJECT-TYPE SYNTAX INTEGER { forward(1), discard (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IPM forward action." ::= { rlIpmFftEntry 7 } rlIpmFftInportAction OBJECT-TYPE SYNTAX INTEGER { sentToCPU(1), discard (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IPM illegal input port action." ::= { rlIpmFftEntry 8 } rlIpmFftAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The age of the entry in seconds from the moment of inserting. " ::= { rlIpmFftEntry 9 } -- -- The IPM FFT Output Port and Tag Table -- rlIpmFftPortTagTable OBJECT-TYPE SYNTAX SEQUENCE OF RlIpmFftPortTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing IPM FFT output port tag information for IPM datagrams." ::= { rlIpmFFT 10 } rlIpmFftPortTagEntry OBJECT-TYPE SYNTAX RlIpmFftPortTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the IPM FFT output port tag information for IP datagrams from a particular source and destination addresses." INDEX { rlIpmFftPortIndex, rlIpmFftPortSrcIpAddress, rlIpmFftPortDstIpAddress, rlIpmFftPortOutputifIndex, rlIpmFftPortOutputTag } ::= { rlIpmFftPortTagTable 1 } RlIpmFftPortTagEntry ::= SEQUENCE { rlIpmFftPortIndex INTEGER, rlIpmFftPortSrcIpAddress IpAddress, rlIpmFftPortDstIpAddress IpAddress, rlIpmFftPortOutputifIndex INTEGER, rlIpmFftPortOutputTag INTEGER } rlIpmFftPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IPM FFT. " ::= { rlIpmFftPortTagEntry 1 } rlIpmFftPortSrcIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP source address for which this entry contains IPM output port tag information." ::= { rlIpmFftPortTagEntry 2 } rlIpmFftPortDstIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPM destination address for which this entry contains IPM port tag information." ::= { rlIpmFftPortTagEntry 3 } rlIpmFftPortOutputifIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The output ifIndex " ::= { rlIpmFftPortTagEntry 4 } rlIpmFftPortOutputTag OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The output Vlan tag together with output ifIndex defines pair (ifIndex, tag)" ::= { rlIpmFftPortTagEntry 5 } -- -- The IPM FFT Counters Table -- rlIpmFftCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF RlIpmFftCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing IPM Counters information per FFT number. " ::= { rlIpmFFT 11 } rlIpmFftCountersEntry OBJECT-TYPE SYNTAX RlIpmFftCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the IPM Counters information containing amount of IPM datagrams passed by certain FFT." INDEX { rlIpmFftCountersIndex } ::= { rlIpmFftCountersTable 1 } RlIpmFftCountersEntry ::= SEQUENCE { rlIpmFftCountersIndex INTEGER, rlIpmFftInReceives INTEGER, rlIpmFftForwDatagrams INTEGER, rlIpmFftInDiscards INTEGER } rlIpmFftCountersIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the index of the IPM FFT. " ::= { rlIpmFftCountersEntry 1 } rlIpmFftInReceives OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of received IPM datagrams " ::= { rlIpmFftCountersEntry 2 } rlIpmFftForwDatagrams OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of forwarded IPM datagrams " ::= { rlIpmFftCountersEntry 3 } rlIpmFftInDiscards OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of discarded IPM datagrams " ::= { rlIpmFftCountersEntry 4 } END