CISCOSB-rndMng DEFINITIONS ::= BEGIN -- Title: CISCOSB Management Private Extension -- Version: 7.45 -- Date: 19 Dec 2006 -- 28-Feb-2005 Added rlCpuUtilEnable -- 28-Feb-2005 Added rlCpuUtilDuringLastSecond -- 28-Feb-2005 Added rlCpuUtilDuringLastMinute -- 28-Feb-2005 Added rlCpuUtilDuringLast5Minutes -- 13-Jun-2006 Added value {none} of rndAction -- 20-Jun-2006 Added rlRebootDelay -- 19-Dec-2006 Added resetToFactoryDefaults -- 04-Apr-2012 Added rlScheduledReload -- 04-Dec-2012 Added rlSysNameTable -- 10-Aug-2018 Added rlDefaultSysName IMPORTS switch001 FROM CISCOSB-MIB Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, TimeTicks FROM SNMPv2-SMI RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB InterfaceIndex FROM IF-MIB; rndMng MODULE-IDENTITY LAST-UPDATED "201212040001Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition for switch001 general management MIB." REVISION "201212040000Z" DESCRIPTION "Added rlSysNameTable object." REVISION "201204040000Z" DESCRIPTION "Added rlScheduledReload object." REVISION "200902240000Z" DESCRIPTION "Added rlRunningCDBequalToStartupCDB object." REVISION "200710240000Z" DESCRIPTION "Added rlGroupManagement branch." REVISION "200606200000Z" DESCRIPTION "Added rlRebootDelay object" REVISION "200406010000Z" DESCRIPTION "Initial version of this MIB." ::= { switch001 1 } rndSysId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of an switch001 device. The device type for each integer clarifies the sysObjectID in MIB - II." ::= { rndMng 1 } rndAction OBJECT-TYPE SYNTAX INTEGER { reset(1), sendNetworkTab(2), deleteNetworkTab(3), sendRoutingTab(4), -- Level II deleteRoutingTab(5), sendLanTab(6), deleteLanTab(7), deleteArpTab(8), sendArpTab(9), deleteRouteTab(10), -- Level III sendRouteTab(11), backupSPFRoutingTab(12), backupIPRoutingTab(13), backupNetworkTab(14), backupLanTab(15), backupArpTab(16), backupIPXRipTab(17), backupIPXSAPTab(18), resetStartupCDB(19), eraseStartupCDB(20), deleteZeroHopRoutingAllocTab(21), slipDisconnect(22), deleteDynamicLanTab(23), eraseRunningCDB(24), copyStartupToRunning(25), none(26), resetToFactoryDefaults(27) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol." ::= { rndMng 2 } rndFileName OBJECT-TYPE SYNTAX OCTET STRING -- SIZE 256 MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the file used internally by switch001 for transferring tables maintained by network devices, using a prorietary File exchange protocol." ::= { rndMng 3 } rlSnmpVersionSupported OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the snmp versions that are supported by this device." ::= { rndMng 4 } rlSnmpMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the snmp support version that is supported by this device." ::= { rndMng 5 } rlCpuUtilEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables measurement of the device CPU utilization. In order to get real values for rlCpuUtilDuringLastSecond, rlCpuUtilDuringLastMinute and rlCpuUtilDuringLast5Minutes, the value of this object must be true." DEFVAL { true } ::= { rndMng 6 } rlCpuUtilDuringLastSecond OBJECT-TYPE SYNTAX INTEGER (0..101) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of the device CPU utilization during last second. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last second)." ::= { rndMng 7 } rlCpuUtilDuringLastMinute OBJECT-TYPE SYNTAX INTEGER (0..101) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of the device CPU utilization during last minute. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last minute)." ::= { rndMng 8 } rlCpuUtilDuringLast5Minutes OBJECT-TYPE SYNTAX INTEGER (0..101) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of the device CPU utilization during the last 5 minutes. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last 5 minutes)." ::= { rndMng 9 } rlRebootDelay OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable will cause the device to reboot rlRebootDelay timeticks from the moment this variable was set. If not set, the variable will return a value of 4294967295. If set to 4294967295, reboot action is cancelled. The maximum delay is set by the host parameter: reboot_delay_max" ::= { rndMng 10 } rlGroupManagement OBJECT IDENTIFIER ::= { rndMng 11 } rlGroupMngQuery OBJECT-TYPE SYNTAX INTEGER {query(1), idle(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting value query will cause the device to query for UPNP devices on the network. The device will always return value idle for GET." ::= { rlGroupManagement 1 } rlGroupMngQueryPeriod OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Sets desired interval between queries for UPNP devices on the network. Setting 0 will result in no such query. Note that the actual query interval might be less than the set value if another application running in the device requested a shorter interval. Likewise setting 0 will not necessarily stop periodic queries if another application is still interested in periodic polling." DEFVAL { 0 } ::= { rlGroupManagement 2 } rlGroupMngLastUpdate OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The last time rlGroupMng MIB was updated." ::= { rlGroupManagement 3 } rlGroupMngDevicesTable OBJECT-TYPE SYNTAX SEQUENCE OF RlGroupMngDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table showing the discovered devices." ::= { rlGroupManagement 4 } rlGroupMngDeviceEntry OBJECT-TYPE SYNTAX RlGroupMngDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The row definition for this table." INDEX { rlGroupMngDeviceIdType, rlGroupMngDeviceId, rlGroupMngSubdevice } ::= { rlGroupMngDevicesTable 1 } RlGroupMngDeviceEntry ::= SEQUENCE { rlGroupMngDeviceIdType InetAddressType, rlGroupMngDeviceId InetAddress, rlGroupMngSubdevice INTEGER, rlGroupMngDeviceDescription DisplayString, rlGroupMngGroupMngEnabled TruthValue, rlGroupMngGroupLLDPDeviceId DisplayString, rlGroupMngDeviceVendor DisplayString, rlGroupMngDeviceAdvertisedCachingTime INTEGER, rlGroupMngDeviceLocationURL DisplayString, rlGroupMngDeviceLastSeen TimeTicks } rlGroupMngDeviceIdType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type of the discovered device " ::= { rlGroupMngDeviceEntry 1 } rlGroupMngDeviceId OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the discovered device " ::= { rlGroupMngDeviceEntry 2 } rlGroupMngSubdevice OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "A subdevice within the rlGroupMngDeviceId. Only subdevices with greatest specifity will be kept (specific UUID device is more specific than basic device which is in turn more specific than root device. " ::= { rlGroupMngDeviceEntry 3 } rlGroupMngDeviceDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The discovery protocol description of the device." ::= { rlGroupMngDeviceEntry 4 } rlGroupMngGroupMngEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the device has Group Management enable." ::= { rlGroupMngDeviceEntry 5 } rlGroupMngGroupLLDPDeviceId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The LLDP device id. If it is empty the device id is not known (either it is a non-MTS device or a non-LLDP supporting MTS device." ::= { rlGroupMngDeviceEntry 6 } rlGroupMngDeviceVendor OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor of the device. If empty the vendor is not known." ::= { rlGroupMngDeviceEntry 7 } rlGroupMngDeviceAdvertisedCachingTime OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The caching time advertised by the device. If no update for this device has been received during this caching time the system will assume that the device has left the network and will therefore remove its entry from the table." ::= { rlGroupMngDeviceEntry 8 } rlGroupMngDeviceLocationURL OBJECT-TYPE SYNTAX DisplayString UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The URL inidicating the location of the XML presenting the details of the device." ::= { rlGroupMngDeviceEntry 9 } rlGroupMngDeviceLastSeen OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the moment of last reception of an update for this device. " ::= { rlGroupMngDeviceEntry 10 } rlPrivateMIBroot OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the object identifier of the private MIB root in this device." ::= { rndMng 12 } rlRunningCDBequalToStartupCDB OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether there are changes in running CDB that were not saved in flash." ::= { rndMng 13 } rlClearMib OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Clear MIB value for scalars or tables: Delete all entries for tables with dynamic entries. Set table entries default values for table with static entries. Set scalar default value." ::= { rndMng 14 } ------------------------------------------------------------------------------- -- Scheduled Reload ------------------------------------------------------------------------------- rlScheduledReload OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Used for requesting a delayed reload of the device in a specific desired time, should be configured in one of the following formats: 'athhmmddMM' , 'inhhhmmm' or '', setting this value to an empty string will result in request for cancellation of a (previously) committed system reload. to complete the request, the 'rlScheduledReloadCommit' must also be set to either TRUE (apply) or FALSE (discard) for completion of the transaction. failing from doing so will result in an indefinite lock of the API" ::= { rndMng 15 } rlScheduledReloadPendingDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the most recently requested scheduled-reload due date in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7). if there is no pending/scheduled reload request, string will be empty" ::= { rndMng 16 } rlScheduledReloadApprovedDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the most recently approved/committed scheduled-reload date in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7). if there is no committed scheduled-reload , string will be empty" ::= { rndMng 17 } rlScheduledReloadCommit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "commits the pending scheduled-reload request, and completes the transaction. when this value is set to TRUE, the system is instructed to perform the requested reload operation at the requested date/time as was given in 'rlScheduledReload'. setting this value to FALSE will discard the request." ::= { rndMng 18 } ------------------------------------------------------------------------------- -- System Name Configuration Table ------------------------------------------------------------------------------- rlSysNameTable OBJECT-TYPE SYNTAX SEQUENCE OF RlSysNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Holds the current system name configuration." ::= { rndMng 19 } rlSysNameEntry OBJECT-TYPE SYNTAX RlSysNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition of this table." INDEX { rlSysNameSource, rlSysNameIfIndex } ::= { rlSysNameTable 1 } RlSysNameEntry ::= SEQUENCE { rlSysNameSource INTEGER, rlSysNameIfIndex InterfaceIndex, rlSysNameName DisplayString (SIZE (0..255)), rlSysNameRowStatus RowStatus } rlSysNameSource OBJECT-TYPE SYNTAX INTEGER { dhcpv6(1), dhcpv4(2), static(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system name source. 'static' if defined by user through CLI, 'dhcpv6' or 'dhcpv4' if received by DHCP network protocol." DEFVAL { static } ::= { rlSysNameEntry 1 } rlSysNameIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IfIndex from which the system-name configuration was received, for static entries, value will always be 1." DEFVAL { 1 } ::= { rlSysNameEntry 2 } rlSysNameName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string." ::= { rlSysNameEntry 3 } rlSysNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { rlSysNameEntry 4 } ------------------------------------------------------------------------------- rlErrdisableLinkFlappingCause OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Link flapping error disable in the switch." ::= { rndMng 20 } ------------------------------------------------------------------------------- rlDefaultSysName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..160)) MAX-ACCESS read-only STATUS current DESCRIPTION "The default value for the administratively-assigned name for this managed node. If the name is unknown, the value is the zero-length string." ::= { rndMng 21 } END