CISCOSB-vlan-MIB DEFINITIONS ::= BEGIN -- Version: 7.46 -- Date: 15 Jan 2007 -- -- 26-Oct-2004 Added -- vlanDynamicVlanSupported -- vlanDynamicVlanTable -- vlanPortModeExtTable -- vlanPrivateSupported -- vlanPrivateTable -- vlanPrivateCommunityTable -- 01-Jul-2005 Added vlanMulticastTvTable -- 14-Jul-2005 Added vlanMacBaseVlan group -- 19-Jul-2005 Added -- vlanPrivateEdgeGroupTable -- vlanPrivateEdgeGroupIfIndexTable -- 14-Jul-2005 Added -- vlanSubnetRangeTable -- vlanSubnetPortTable -- 20-Jul-2005 Added -- vlanSubnetRangeTable -- vlanSubnetPortTable -- 30-Nov-2005 Added -- vlanTriplePlayTable -- vlanTriplePlayMulticastTvTable -- 21-Nov-2006 Added vlanVoice -- 15-Jan-2007 Devided file appolo.txt to a few files -- Renamed file appolo.txt to ralan-mib.mib -- 11-Feb-2007 (VeredK) Added default vlan tagged ports MIBs -- 29-Sep-2008 Added Default VLAN membership enabled ports -- 16-Oct-2008 (ShaharG) Added DIPO Asymmetric vlan MIB -- 13-Oct-2009 (GenadyB) Added trunk port mode vlan list MIB -- 06-Sep-2010 (GenadyB) Added rldot1qPortVlanStaticTable MIB -- 08-Aug-2016 (OctaviaP) Added vlanMappingTunnelEdgePortTable MIB IMPORTS switch001 FROM CISCOSB-MIB DisplayString, TruthValue, RowStatus, MacAddress FROM SNMPv2-TC VlanIndex, dot1qVlanIndex, PortList FROM Q-BRIDGE-MIB VlanList1, VlanList2, VlanList3, VlanList4 FROM CISCOSB-BRIDGEMIBOBJECTS-MIB ifIndex FROM IF-MIB dot1dBasePort FROM BRIDGE-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-IDENTITY, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI InetAddressType FROM INET-ADDRESS-MIB; vlan MODULE-IDENTITY LAST-UPDATED "200602120001Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition for IP Multicast support in CISCOSB devices." REVISION "200602120000Z" DESCRIPTION "Editorial changes to support new MIB compilers." REVISION "200404190000Z" DESCRIPTION "Initial version of this MIB." ::= { switch001 48 } vlanMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version : Version 2: the current VLAN MIB replaced the previous one; Version 3: field vlanPortForbiddenEgressPort was added. Version 4: dot1q and dot1v supported Version 5: Private Edge Vlan vlanPrivateEdgeSupported vlanPrivateEdgeMibVersion vlanPrivateEdgeTable" ::= { vlan 1 } vlanMaxTableNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of VLAN Tables supported by the device." ::= { vlan 2 } vlanNameTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table translates Vlan name to Vlan's tag and ifindex" ::= { vlan 21 } vlanNameEntry OBJECT-TYPE SYNTAX VlanNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table." INDEX { vlanNameName } ::= { vlanNameTable 1 } VlanNameEntry ::= SEQUENCE { vlanNameName DisplayString, vlanNameTag INTEGER, vlanNameIfIndex INTEGER } vlanNameName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Vlan's name" ::= { vlanNameEntry 1 } vlanNameTag OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The Vlan's tag" ::= { vlanNameEntry 2 } vlanNameIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The Vlan's ifindex" ::= { vlanNameEntry 3 } vlanPortModeTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table hold information on port status trunk or access" ::= { vlan 22 } vlanPortModeEntry OBJECT-TYPE SYNTAX VlanPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table." INDEX { ifIndex } ::= { vlanPortModeTable 1 } VlanPortModeEntry ::= SEQUENCE { vlanPortModeState INTEGER } vlanPortModeState OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The port state, 1 is generic cli" ::= { vlanPortModeEntry 1 } vlanSendUnknownToAllPorts OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If a value of the parameter is true a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be sent to all ports of the VLAN. If a value of the parameter is false a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be discarded." DEFVAL { true } ::= { vlan 27 } vlanDefaultSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "supported or not default vlan." ::= { vlan 29 } vlanDot1vSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "802.1v standard for vlan per port and protocol." ::= { vlan 31 } vlanDefaultEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "if supported default vlan , indicate enabled or disabled" ::= { vlan 32 } vlanSpecialTagTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSpecialTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "special vlan tag used for this port" ::= { vlan 33 } vlanSpecialTagEntry OBJECT-TYPE SYNTAX VlanSpecialTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of special tag" INDEX { ifIndex } ::= { vlanSpecialTagTable 1 } VlanSpecialTagEntry ::= SEQUENCE { vlanSpecialTagVID VlanIndex, vlanSpecialTagStatus RowStatus } vlanSpecialTagVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "specify the special vlan tag ." ::= { vlanSpecialTagEntry 1 } vlanSpecialTagStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanSpecialTagEntry 2 } vlanSpecialTagCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSpecialTagCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "special Current vlan tag used for this port" ::= { vlan 34 } vlanSpecialTagCurrentEntry OBJECT-TYPE SYNTAX VlanSpecialTagCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of Current special tag" INDEX { ifIndex } ::= { vlanSpecialTagCurrentTable 1 } VlanSpecialTagCurrentEntry ::= SEQUENCE { vlanSpecialTagCurrentVID VlanIndex, vlanSpecialTagCurrentReserved TruthValue, vlanSpecialTagCurrentActive TruthValue } vlanSpecialTagCurrentVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "specify the special vlan tag ." ::= { vlanSpecialTagCurrentEntry 1 } vlanSpecialTagCurrentReserved OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "specify if the special vlan tag is reserved ." ::= { vlanSpecialTagCurrentEntry 2 } vlanSpecialTagCurrentActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "specify if the special vlan tag is used ." ::= { vlanSpecialTagCurrentEntry 3 } vlanPrivateEdgeSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "is private edge supported." ::= { vlan 35 } vlanPrivateEdgeVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "private edge version." ::= { vlan 36 } vlanPrivateEdgeTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPrivateEdgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table for pve port and uplink" ::= { vlan 37 } vlanPrivateEdgeEntry OBJECT-TYPE SYNTAX VlanPrivateEdgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of pve" INDEX { ifIndex } ::= { vlanPrivateEdgeTable 1 } VlanPrivateEdgeEntry ::= SEQUENCE { vlanPrivateEdgeUplink INTEGER, vlanPrivateEdgeStatus RowStatus } vlanPrivateEdgeUplink OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "specify the uplink port." ::= { vlanPrivateEdgeEntry 1 } vlanPrivateEdgeStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanPrivateEdgeEntry 2 } vlanDynamicVlanSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "is DynamicVlanVlan supported." ::= { vlan 38 } vlanDynamicVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanDynamicVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table for DynamicVlan" ::= { vlan 39 } vlanDynamicVlanEntry OBJECT-TYPE SYNTAX VlanDynamicVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of DynamicVlan" INDEX { vlanDynamicVlanMacAddress } ::= { vlanDynamicVlanTable 1 } VlanDynamicVlanEntry ::= SEQUENCE { vlanDynamicVlanMacAddress MacAddress, vlanDynamicVlanTag VlanIndex, vlanDynamicVlanStatus RowStatus } vlanDynamicVlanMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "mac address " ::= { vlanDynamicVlanEntry 1 } vlanDynamicVlanTag OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "vlan Tag" ::= { vlanDynamicVlanEntry 2 } vlanDynamicVlanStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanDynamicVlanEntry 3 } vlanPortModeExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPortModeExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table hold information on port status trunk or access" ::= { vlan 40 } vlanPortModeExtEntry OBJECT-TYPE SYNTAX VlanPortModeExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table." INDEX { ifIndex } ::= { vlanPortModeExtTable 1 } VlanPortModeExtEntry ::= SEQUENCE { vlanPortModeExtState INTEGER, vlanPortModeExtStatus RowStatus } vlanPortModeExtState OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The ext" ::= { vlanPortModeExtEntry 1 } vlanPortModeExtStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanPortModeExtEntry 2 } vlanPrivateSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "is private vlan supported." ::= { vlan 41 } vlanPrivateTableOld OBJECT-TYPE SYNTAX SEQUENCE OF VlanPrivateEntryOld MAX-ACCESS not-accessible STATUS current DESCRIPTION "table for PrivateVlan" ::= { vlan 42 } vlanPrivateEntryOld OBJECT-TYPE SYNTAX VlanPrivateEntryOld MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of PrivateVlan" INDEX { dot1qVlanIndex } ::= { vlanPrivateTableOld 1 } VlanPrivateEntryOld ::= SEQUENCE { vlanPrivateOldIsolatedVlanTag INTEGER, vlanPrivateOldStatus RowStatus } vlanPrivateOldIsolatedVlanTag OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "vlan Tag" ::= { vlanPrivateEntryOld 1 } vlanPrivateOldStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanPrivateEntryOld 2 } vlanPrivateCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPrivateCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table for PrivateVlan" ::= { vlan 43 } vlanPrivateCommunityEntry OBJECT-TYPE SYNTAX VlanPrivateCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of PrivateVlan" INDEX { dot1qVlanIndex, vlanPrivateCommunityVlanTag } ::= { vlanPrivateCommunityTable 1 } VlanPrivateCommunityEntry ::= SEQUENCE { vlanPrivateCommunityVlanTag VlanIndex, vlanPrivateCommunityStatus RowStatus } vlanPrivateCommunityVlanTag OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "vlan Tag" ::= { vlanPrivateCommunityEntry 1 } vlanPrivateCommunityStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanPrivateCommunityEntry 2 } vlanMulticastTvTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanMulticastTvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " multicast vlan used for this port" ::= { vlan 44 } vlanMulticastTvEntry OBJECT-TYPE SYNTAX VlanMulticastTvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of multicast tag" INDEX { ifIndex } ::= { vlanMulticastTvTable 1 } VlanMulticastTvEntry ::= SEQUENCE { vlanMulticastTvVID VlanIndex, vlanMulticastTvStatus RowStatus } vlanMulticastTvVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "specify the TV vlan tag, vlan must exist ." ::= { vlanMulticastTvEntry 1 } vlanMulticastTvStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanMulticastTvEntry 2 } -- ------------------------------------------------------------- -- vlanMacBaseVlan group -- ------------------------------------------------------------- vlanMacBaseVlanGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanMacBaseVlanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains mappings from Range of MAC addresses to Group Identifiers used for MAC-based VLAN Classification." ::= { vlan 45 } vlanMacBaseVlanGroupEntry OBJECT-TYPE SYNTAX VlanMacBaseVlanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A mapping from a Range of MAC addresses to a Group Identifier." INDEX { vlanMacBaseVlanMacAddress, vlanMacBaseVlanMacMask } ::= { vlanMacBaseVlanGroupTable 1 } VlanMacBaseVlanGroupEntry ::= SEQUENCE { vlanMacBaseVlanMacAddress MacAddress, vlanMacBaseVlanMacMask INTEGER, vlanMacBaseVlanGroupId INTEGER, vlanMacBaseVlanGroupRowStatus RowStatus } vlanMacBaseVlanMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The base MAC address of the range." REFERENCE "IEEE 802.1v clause 8.6.2" ::= { vlanMacBaseVlanGroupEntry 1 } vlanMacBaseVlanMacMask OBJECT-TYPE SYNTAX INTEGER (9..48) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Mask of the range. The mask determains the leading '1' bits of the mask (MSB). 48 means single HOST and 9 means the widest range. The MASK is limited to 9 to avoid entring ranges including multicast addresses. " ::= { vlanMacBaseVlanGroupEntry 2 } vlanMacBaseVlanGroupId OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Represents a group of ranges of MAC addresses that are associated together when assigning a VID to a frame." ::= { vlanMacBaseVlanGroupEntry 3 } vlanMacBaseVlanGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { vlanMacBaseVlanGroupEntry 4 } vlanMacBaseVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanMacBaseVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains VID sets used for MAC-based VLAN Classification." ::= { vlan 46 } vlanMacBaseVlanPortEntry OBJECT-TYPE SYNTAX VlanMacBaseVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VID set for a port and group." INDEX { dot1dBasePort, vlanMacBaseVlanPortGroupId } ::= { vlanMacBaseVlanPortTable 1 } VlanMacBaseVlanPortEntry ::= SEQUENCE { vlanMacBaseVlanPortGroupId INTEGER, vlanMacBaseVlanPortGroupVid VlanIndex, vlanMacBaseVlanPortRowStatus RowStatus } vlanMacBaseVlanPortGroupId OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Designates a group of Ranges in the ranges Group Database." ::= { vlanMacBaseVlanPortEntry 1 } vlanMacBaseVlanPortGroupVid OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The VID associated with a group of range MAC addresses for each port." ::= { vlanMacBaseVlanPortEntry 2 } vlanMacBaseVlanPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { vlanMacBaseVlanPortEntry 3 } vlanPrivateEdgeGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPrivateEdgeGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table for pve port and uplink" ::= { vlan 47 } vlanPrivateEdgeGroupEntry OBJECT-TYPE SYNTAX VlanPrivateEdgeGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of pve" INDEX { vlanPrivateEdgeGroupSource } ::= { vlanPrivateEdgeGroupTable 1 } VlanPrivateEdgeGroupEntry ::= SEQUENCE { vlanPrivateEdgeGroupSource INTEGER, vlanPrivateEdgeGroupUplink INTEGER, vlanPrivateEdgeGroupStatus RowStatus } vlanPrivateEdgeGroupSource OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "specify the uplink group." ::= { vlanPrivateEdgeGroupEntry 1 } vlanPrivateEdgeGroupUplink OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "specify the uplink port." ::= { vlanPrivateEdgeGroupEntry 2 } vlanPrivateEdgeGroupStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanPrivateEdgeGroupEntry 3 } vlanPrivateEdgeGroupIfIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPrivateEdgeGroupIfIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table for pve port and uplink" ::= { vlan 48 } vlanPrivateEdgeGroupIfIndexEntry OBJECT-TYPE SYNTAX VlanPrivateEdgeGroupIfIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of pve" INDEX { ifIndex } ::= { vlanPrivateEdgeGroupIfIndexTable 1 } VlanPrivateEdgeGroupIfIndexEntry ::= SEQUENCE { vlanPrivateEdgeGroupIfIndexID INTEGER, vlanPrivateEdgeGroupIfIndexDomainID INTEGER } vlanPrivateEdgeGroupIfIndexID OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "specify the ifIndex group id." ::= { vlanPrivateEdgeGroupIfIndexEntry 1 } vlanPrivateEdgeGroupIfIndexDomainID OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "specify the ifIndex group id." ::= { vlanPrivateEdgeGroupIfIndexEntry 2 } -- ------------------------------------------------------------- -- vlanSubnetRange group -- ------------------------------------------------------------- vlanSubnetRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSubnetRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains mappings from subnet range to Group Identifiers used for Port-and-subnet-based VLAN Classification." REFERENCE "IEEE 802.1v clause 8.6.4" ::= { vlan 49 } vlanSubnetRangeEntry OBJECT-TYPE SYNTAX VlanSubnetRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A mapping from a subnet to a Group Identifier." INDEX { vlanSubnetRangeAddr, vlanSubnetRangeMask } ::= { vlanSubnetRangeTable 1 } VlanSubnetRangeEntry ::= SEQUENCE { vlanSubnetRangeAddr IpAddress, vlanSubnetRangeMask INTEGER, vlanSubnetRangeGroupId INTEGER, vlanSubnetRangeRowStatus RowStatus } vlanSubnetRangeAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the range " ::= { vlanSubnetRangeEntry 1 } vlanSubnetRangeMask OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The numbers of continuous ones in the mask " ::= { vlanSubnetRangeEntry 2 } vlanSubnetRangeGroupId OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Represents a group of subnets that are associated together when assigning a VID to a frame." ::= { vlanSubnetRangeEntry 3 } vlanSubnetRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { vlanSubnetRangeEntry 4 } -- port bind vlanSubnetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSubnetPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains VID sets used for Port-and-subnet-based VLAN Classification." ::= { vlan 50 } vlanSubnetPortEntry OBJECT-TYPE SYNTAX VlanSubnetPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VID set for a port." INDEX { dot1dBasePort, vlanSubnetPortGroupId } ::= { vlanSubnetPortTable 1 } VlanSubnetPortEntry ::= SEQUENCE { vlanSubnetPortGroupId INTEGER, vlanSubnetPortGroupVid INTEGER, vlanSubnetPortRowStatus RowStatus } vlanSubnetPortGroupId OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Designates a group of subnets in the Group Database." ::= { vlanSubnetPortEntry 1 } vlanSubnetPortGroupVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The VID associated with a group of subnets for each port." ::= { vlanSubnetPortEntry 2 } vlanSubnetPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { vlanSubnetPortEntry 3 } ---------------------- -- Triple Play ---------------------- -- vlanTriplePlayTable table converted to Inet See vlanInetTriplePlayTable vlanTriplePlayTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanTriplePlayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " TriplePlay table, map CPE vlan to multicastTvVlan" ::= { vlan 51} vlanTriplePlayEntry OBJECT-TYPE SYNTAX VlanTriplePlayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of TriplePlay table" INDEX { vlanTriplePlayInnerVID } ::= { vlanTriplePlayTable 1 } VlanTriplePlayEntry ::= SEQUENCE { vlanTriplePlayInnerVID VlanIndex, vlanTriplePlayMulticastTvVID VlanIndex, vlanTriplePlayRowStatus RowStatus } vlanTriplePlayInnerVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Specifies the CPE inner vlan." ::= { vlanTriplePlayEntry 1 } vlanTriplePlayMulticastTvVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies the multicast TV outer vlan." ::= { vlanTriplePlayEntry 2 } vlanTriplePlayRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row creation and removal conventions." ::= { vlanTriplePlayEntry 3 } -- vlanTriplePlayMulticastTvTable table converted to Inet see vlanInetTriplePlayMulticastTvTable vlanTriplePlayMulticastTvTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanTriplePlayMulticatTvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan" ::= { vlan 52} vlanTriplePlayMulticatTvEntry OBJECT-TYPE SYNTAX VlanTriplePlayMulticatTvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of triple play MulticastTv table" INDEX { vlanTriplePlayMulticastTvMulticastTvVID } ::= { vlanTriplePlayMulticastTvTable 1 } VlanTriplePlayMulticatTvEntry ::= SEQUENCE { vlanTriplePlayMulticastTvMulticastTvVID VlanIndex, vlanTriplePlayMulticastTvMulticastTvPortList PortList } vlanTriplePlayMulticastTvMulticastTvVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the multicast TV external vlan." ::= { vlanTriplePlayMulticatTvEntry 1 } vlanTriplePlayMulticastTvMulticastTvPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "the multicast tv port list." ::= { vlanTriplePlayMulticatTvEntry 2} vlanDefaultExtManagment OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "enable disable ext managment on default vlan." ::= { vlan 53 } ------------------------------- -- Voice VLAN MIBs definition ------------------------------- -- deprecated vlanVoice OBJECT IDENTIFIER ::= { vlan 54 } vlanVoiceAgingTimeout OBJECT-TYPE SYNTAX INTEGER (1..43200) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The vlanVoiceAgingTimeout indicates the time (in units of minutes) from when the last OUI MAC was ageout from the FDB the port will be removed from the Voice VLAN. The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours). The value of this object must be restored from non-volatile storage after a re-initialization of the management system." DEFVAL { 1440 } ::= { vlanVoice 1 } -- voice vlan table vlanVoiceTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanVoiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static configuration information for each voice VLAN configured into the device and dynamic port membership. All entries are permanent and will be restored after the device is reset." ::= { vlanVoice 2 } vlanVoiceEntry OBJECT-TYPE SYNTAX VlanVoiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information for a voice VLAN configured into the device by management." INDEX { dot1qVlanIndex } ::= { vlanVoiceTable 1 } VlanVoiceEntry ::= SEQUENCE { vlanVoicePriority INTEGER, vlanVoicePriorityRemark TruthValue, vlanVoiceRowStatus RowStatus } vlanVoicePriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively assigned Priority, which will be used for all traffic on the voice vlan, this gives the packets the requested priority (CoS) within the bridge." DEFVAL{ 6 } ::= { vlanVoiceEntry 1 } vlanVoicePriorityRemark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Remark VPT on tagged frames egress the voice vlan according. to priority true.false" DEFVAL { false } ::= { vlanVoiceEntry 2 } vlanVoiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { vlanVoiceEntry 3 } -- Voice VLAN OUI Table vlanVoiceOUITable OBJECT-TYPE SYNTAX SEQUENCE OF VlanVoiceOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static global configuration information for Voice VLANs OUI MAC Prefixes. All entries are permanent and will be restored after the device is reset." ::= { vlanVoice 3 } vlanVoiceOUIEntry OBJECT-TYPE SYNTAX VlanVoiceOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information for a voice VLANs OUI MAC Prefixes configured into the device by management." INDEX { vlanVoiceOUIPrefix } ::= { vlanVoiceOUITable 1 } VlanVoiceOUIEntry ::= SEQUENCE { vlanVoiceOUIPrefix OCTET STRING, vlanVoiceOUIDescription DisplayString, vlanVoiceOUIEntryRowStatus RowStatus } vlanVoiceOUIPrefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value used to identify the OUI MAC Prefix component associated with this entry. The value of this object is used as an index to the vlanVoiceOUITable. Voice VLANs OUI Prefix is the first 3 most significant octets of the MAC address." ::= { vlanVoiceOUIEntry 1 } vlanVoiceOUIDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "An optional text that describes the OUI." DEFVAL {""} ::= { vlanVoiceOUIEntry 2 } vlanVoiceOUIEntryRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { vlanVoiceOUIEntry 3 } -- Voice VLAN per Port configuration Table vlanVoicePortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanVoicePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static and dynamic per port configuration information for Voice VLAN. All entries are permanent and will be restored after the device is reset." ::= { vlanVoice 4 } vlanVoicePortEntry OBJECT-TYPE SYNTAX VlanVoicePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static and dynamic per port information for a voice VLAN." INDEX { ifIndex } ::= { vlanVoicePortTable 1 } VlanVoicePortEntry ::= SEQUENCE { vlanVoicePortEnable TruthValue, vlanVoicePortVlanIndex VlanIndex, vlanVoicePortSecure TruthValue, vlanVoicePortCurrentMembership INTEGER {active(1),notActive(2)}, vlanVoicePortQosMode INTEGER {src(1),all(2)} } vlanVoicePortEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable this port to be a candidate to be added into the Voice VLAN." DEFVAL{ false } ::= { vlanVoicePortEntry 1 } vlanVoicePortVlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The Voice VLAN-ID the port is a candidate to be in." DEFVAL{ 4095 } ::= { vlanVoicePortEntry 2 } vlanVoicePortSecure OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specify this port to be in Secure Mode when entering the Voice VLAN. In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes are accepted, otherwise dropped." DEFVAL{ false } ::= { vlanVoicePortEntry 3 } vlanVoicePortCurrentMembership OBJECT-TYPE SYNTAX INTEGER { active(1), notActive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Port's current status of membership in Voice VLAN. Port's possible values of membership in Voice VLAN: 'Active(1)' - Port is currently added to a Voice VLAN . 'NotActive(2)' - Specifies either that port is a candidate to be in Voice VLAN or disabled." ::= { vlanVoicePortEntry 4 } vlanVoicePortQosMode OBJECT-TYPE SYNTAX INTEGER { src(1), all(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Port's current QOS mode in Voice VLAN. Possible values: 'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan. 'all(2)' - All traffic through that port received QOS of the Voice Vlan." ::= { vlanVoicePortEntry 5 } vlanVoiceOUISetToDefault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The vlanVoiceOUISetToDefault indicates that vlanVoiceOUITable should be set to it's default values if existed (OUI default prefixes). To do so the vlanVoiceOUITable should be previuosly deleted by usual entries destroying. This object behaviors as write-only than reading this object will always return 'false'." DEFVAL{ false } ::= { vlanVoice 5 } -------------------------------------------------- -- Default VLAN tagged ports - MIBs definition -------------------------------------------------- vlanDefault OBJECT IDENTIFIER ::= { vlan 55 } vlanDefaultTaggedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "list of default valn tagged ports." ::= { vlanDefault 1 } -------------------------------------------------- -- Default VLAN excluded ports - MIBs definition -------------------------------------------------- vlanDefaultEnabledPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "List of default VLAN membership enabled ports." ::= { vlanDefault 2 } -- vlanInetTriplePlayTable (replaced DEPRICATED vlanTriplePlayTable) vlanInetTriplePlayTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanInetTriplePlayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " TriplePlay table, map CPE vlan to multicastTvVlan" ::= { vlan 56} vlanInetTriplePlayEntry OBJECT-TYPE SYNTAX VlanInetTriplePlayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of TriplePlay table" INDEX { vlanInetTriplePlayInetAddressType, vlanTriplePlayInnerVID } ::= { vlanInetTriplePlayTable 1 } VlanInetTriplePlayEntry ::= SEQUENCE { vlanInetTriplePlayInetAddressType InetAddressType, vlanInetTriplePlayInnerVID VlanIndex, vlanInetTriplePlayMulticastTvVID VlanIndex, vlanInetTriplePlayRowStatus RowStatus } vlanInetTriplePlayInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Inet type IPv4/IPv6." ::= { vlanInetTriplePlayEntry 1 } vlanInetTriplePlayInnerVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Specifies the CPE inner vlan." ::= { vlanInetTriplePlayEntry 2 } vlanInetTriplePlayMulticastTvVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies the multicast TV outer vlan." ::= { vlanInetTriplePlayEntry 3 } vlanInetTriplePlayRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row creation and removal conventions." ::= { vlanInetTriplePlayEntry 4 } -- vlanInetTriplePlayMulticastTvTable (replaced DEPRICATED vlanTriplePlayMulticastTvTable) vlanInetTriplePlayMulticastTvTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanInetTriplePlayMulticatTvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan" ::= { vlan 57 } vlanInetTriplePlayMulticatTvEntry OBJECT-TYPE SYNTAX VlanInetTriplePlayMulticatTvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " entry of triple play MulticastTv table" INDEX { vlanTriplePlayMulticastTvMulticastTvVID } ::= { vlanInetTriplePlayMulticastTvTable 1 } VlanInetTriplePlayMulticatTvEntry ::= SEQUENCE { vlanInetTriplePlayMulticastTvMulticastTvVID VlanIndex, vlanInetTriplePlayMulticastTvMulticastTvPortList PortList } vlanInetTriplePlayMulticastTvMulticastTvVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the multicast TV external vlan." ::= { vlanInetTriplePlayMulticatTvEntry 1 } vlanInetTriplePlayMulticastTvMulticastTvPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "the multicast tv port list." ::= { vlanInetTriplePlayMulticatTvEntry 2} vlanAsymmetricEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates enabled or disabled of Asymetric Vlan" ::= { vlan 58 } -------------------------------------------------- -- Private VLAN - MIBs definition -------------------------------------------------- -- vlanPrivateTable vlanPrivateTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPrivateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Private vlan table which contains the private vlan entries." ::= { vlan 59 } vlanPrivateEntry OBJECT-TYPE SYNTAX VlanPrivateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Private vlan entry which contains the private vlan definition." INDEX { vlanPrivateVid } ::= { vlanPrivateTable 1 } VlanPrivateEntry ::= SEQUENCE { vlanPrivateVid VlanIndex, vlanPrivateType INTEGER, vlanPrivatePrimaryVid VlanIndex, vlanPrivateStatus RowStatus } vlanPrivateVid OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The static vlan ID which is set to one of the private vlan types." ::= { vlanPrivateEntry 1 } vlanPrivateType OBJECT-TYPE SYNTAX INTEGER { primary(1), isolated(2), community(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "private vlan types: primary - Carries traffic from promiscuous ports. promiscuous port can communicate with all ports of the same PVLAN, including the isolated and community ports of the same PVLAN. isolated - Carries traffic from isolated ports. isolated ports can communicate only with the promiscuous ports of the same PVLAN. community - Carries traffic from community ports. community ports of the same community can communicate among themselves and with the promiscuous ports of the same PVLAN." DEFVAL { primary } ::= { vlanPrivateEntry 2 } vlanPrivatePrimaryVid OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The primary vlan ID which has defined in VlanPrivateEntry and which is associated with secondary vlan (in vlanPrivateMapTable). vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is primary vlan." ::= { vlanPrivateEntry 3 } vlanPrivateStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanPrivateEntry 4 } -- end of vlanPrivateTable -- vlanPrivateMapTable vlanPrivateMapTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPrivateMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Private vlan mapping table which contains the private vlan mapping entries." ::= { vlan 60 } vlanPrivateMapEntry OBJECT-TYPE SYNTAX VlanPrivateMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Private vlan mapping entry which contains the primary / secondary private vlan association and their ports membership." INDEX { vlanPrivateMapPrimaryVid, vlanPrivateMapSecondaryVid } ::= { vlanPrivateMapTable 1 } VlanPrivateMapEntry ::= SEQUENCE { vlanPrivateMapPrimaryVid VlanIndex, vlanPrivateMapSecondaryVid VlanIndex, vlanPrivateMapPrimaryPorts PortList, vlanPrivateMapSecondaryPorts PortList, vlanPrivateMapPrimaryOperPorts PortList, vlanPrivateMapSecondaryOperPorts PortList, vlanPrivateMapStatus RowStatus } vlanPrivateMapPrimaryVid OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary private vlan ID which is associated with the secondary (isolated or community) vlan (vlanPrivateMapSecondaryVid)." ::= { vlanPrivateMapEntry 1 } vlanPrivateMapSecondaryVid OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The secondary private vlan ID which is associated with the primary vlan (vlanPrivateMapPrimaryVid)." ::= { vlanPrivateMapEntry 2 } vlanPrivateMapPrimaryPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The private vlan promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid." ::= { vlanPrivateMapEntry 3} vlanPrivateMapSecondaryPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The private vlan host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid." ::= { vlanPrivateMapEntry 4} vlanPrivateMapPrimaryOperPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The private vlan active promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid." ::= { vlanPrivateMapEntry 5} vlanPrivateMapSecondaryOperPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The private vlan active host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid." ::= { vlanPrivateMapEntry 6} vlanPrivateMapStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanPrivateMapEntry 7 } -- end of vlanPrivateMapTable -- vlanTrunkModePortTable vlanTrunkPortModeTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanTrunkPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tables contains trunk mode port entries." ::= { vlan 61} vlanTrunkPortModeEntry OBJECT-TYPE SYNTAX VlanTrunkPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry contains port ifIndex,native vlan id and vlan list the port has a membership. The vlan list can contain not created vlans." INDEX { ifIndex } ::= { vlanTrunkPortModeTable 1 } VlanTrunkPortModeEntry::=SEQUENCE{ vlanTrunkPortModeNativeVlanId VlanIndex, vlanTrunkModeList1to1024 VlanList1, vlanTrunkModeList1025to2048 VlanList2, vlanTrunkModeList2049to3072 VlanList3, vlanTrunkModeList3073to4094 VlanList4 } vlanTrunkPortModeNativeVlanId OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated native vlan index.Default value 0" DEFVAL {0} ::= { vlanTrunkPortModeEntry 1 } vlanTrunkModeList1to1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-write STATUS current DESCRIPTION "vlan trunk mode list 1. Default value is {0}" ::= { vlanTrunkPortModeEntry 2 } vlanTrunkModeList1025to2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-write STATUS current DESCRIPTION "vlan trunk mode list 2. Default value is {0}" ::= { vlanTrunkPortModeEntry 3 } vlanTrunkModeList2049to3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-write STATUS current DESCRIPTION "vlan trunk mode list 3. Default value is {0}" ::= { vlanTrunkPortModeEntry 4 } vlanTrunkModeList3073to4094 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-write STATUS current DESCRIPTION "vlan trunk mode list 4. Default value is {0}" ::= { vlanTrunkPortModeEntry 5 } -- vlanAccessModePortTable vlanAccessPortModeTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanAccessPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tables contains access mode port entries." ::= { vlan 62} vlanAccessPortModeEntry OBJECT-TYPE SYNTAX VlanAccessPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry contains port ifIndex,access vlan id and multicast TV vlan id." INDEX { ifIndex } ::= { vlanAccessPortModeTable 1 } VlanAccessPortModeEntry::=SEQUENCE{ vlanAccessPortModeVlanId VlanIndex, vlanAccessPortModeMcstTvVlanId VlanIndex } vlanAccessPortModeVlanId OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated access vlan id.Default value is 0" DEFVAL { 0 } ::= { vlanAccessPortModeEntry 1 } vlanAccessPortModeMcstTvVlanId OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated multicast TV vlan id. " ::= { vlanAccessPortModeEntry 2 } -- vlanCustomerModePortTable vlanCustomerPortModeTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanCustomerPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tables contains customer mode port entries." ::= { vlan 63} vlanCustomerPortModeEntry OBJECT-TYPE SYNTAX VlanCustomerPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id." INDEX { ifIndex } ::= { vlanCustomerPortModeTable 1 } VlanCustomerPortModeEntry::=SEQUENCE{ vlanCustomerPortModeVlanId VlanIndex, vlanCustomerPortModeMtvList1to1024 VlanList1, vlanCustomerPortModeMtvList1025to2048 VlanList2, vlanCustomerPortModeMtvList2049to3072 VlanList3, vlanCustomerPortModeMtvList3073to4094 VlanList4 } vlanCustomerPortModeVlanId OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated customer vlan id.Default value is 0" DEFVAL { 0 } ::= { vlanCustomerPortModeEntry 1 } vlanCustomerPortModeMtvList1to1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-only STATUS current DESCRIPTION "vlan customer port mode multicast TV list 1. Default value is {0}" ::= { vlanCustomerPortModeEntry 2 } vlanCustomerPortModeMtvList1025to2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-only STATUS current DESCRIPTION "vlan customer port mode multicast TV list 2. Default value is {0}" ::= { vlanCustomerPortModeEntry 3 } vlanCustomerPortModeMtvList2049to3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-only STATUS current DESCRIPTION "vlan customer port mode multicast TV list 3. Default value is {0}" ::= { vlanCustomerPortModeEntry 4 } vlanCustomerPortModeMtvList3073to4094 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-only STATUS current DESCRIPTION "vlan customer port mode multicast TV list 4. Default value is {0}" ::= { vlanCustomerPortModeEntry 5 } vlanSwitchPortModeTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSwitchPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines L3/L2 port context." ::= { vlan 64} vlanSwitchPortModeEntry OBJECT-TYPE SYNTAX VlanSwitchPortModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry contains port ifIndex and switch port enable value." INDEX { ifIndex } ::= { vlanSwitchPortModeTable 1 } VlanSwitchPortModeEntry::=SEQUENCE{ vlanSwitchPortModeCategory INTEGER } vlanSwitchPortModeCategory OBJECT-TYPE SYNTAX INTEGER { l2(1), l3(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated if a port is switchport (l2 port) or no switchport (l3 port) 1 - switchport 2 - no switchport. Default is 1" DEFVAL { 1 } ::= { vlanSwitchPortModeEntry 1 } vlanPortModeContextTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPortModeContextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tables contains current port mode context entries." ::= { vlan 65} vlanPortModeContextEntry OBJECT-TYPE SYNTAX VlanPortModeContextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry contains current port mode context." INDEX { ifIndex } ::= { vlanPortModeContextTable 1 } VlanPortModeContextEntry::=SEQUENCE{ vlanPortModeContextValue INTEGER } vlanPortModeContextValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated port context value: 0. Lag 1. Monitor 2. L3 3. RAVA 4. Dot1x 5. Dot1q 6. Access 7. Trunk 8. Customer 9. PV_promisc 10. PV_host 11. VM_tunnel 12. VM_one_to_one" ::= { vlanPortModeContextEntry 1 } -- vlanRsvl MIBs reservation -- vlanRsvlEnable vlanRsvlEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable / Disable Shared Vlans at the device." ::= { vlan 66 } -- vlanRsvlMapTable vlanRsvlMapTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanRsvlMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Shared vlan learning mapping table which contains the SVL mapping entries." ::= { vlan 67 } vlanRsvlMapEntry OBJECT-TYPE SYNTAX VlanRsvlMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SVL mapping entry which contains the primary / secondary SVL association." INDEX { vlanRsvlMapPrimaryVid, vlanRsvlMapSecondaryVid } ::= { vlanRsvlMapTable 1 } VlanRsvlMapEntry ::= SEQUENCE { vlanRsvlMapPrimaryVid VlanIndex, vlanRsvlMapSecondaryVid VlanIndex, vlanRsvlMapStatus RowStatus } vlanRsvlMapPrimaryVid OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary SVL ID which is associated with the secondary shared vlan vlanRsvlMapSecondaryVid." ::= { vlanRsvlMapEntry 1 } vlanRsvlMapSecondaryVid OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The secondary SVL ID which is associated with the primary shared vlan vlanRsvlMapPrimaryVid." ::= { vlanRsvlMapEntry 2 } vlanRsvlMapStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanRsvlMapEntry 3 } rldot1qPortVlanStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF Rldot1qPortVlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static vlan port membership information." ::= { vlan 68 } rldot1qPortVlanStaticEntry OBJECT-TYPE SYNTAX Rldot1qPortVlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static vlan membership information per port" INDEX {ifIndex} ::= { rldot1qPortVlanStaticTable 1 } Rldot1qPortVlanStaticEntry ::=SEQUENCE { rldot1qPortVlanStaticEgressList1to1024 VlanList1, rldot1qPortVlanStaticEgressList1025to2048 VlanList2, rldot1qPortVlanStaticEgressList2049to3072 VlanList3, rldot1qPortVlanStaticEgressList3073to4094 VlanList4, rldot1qPortVlanStaticUntaggedEgressList1to1024 VlanList1, rldot1qPortVlanStaticUntaggedEgressList1025to2048 VlanList2, rldot1qPortVlanStaticUntaggedEgressList2049to3072 VlanList3, rldot1qPortVlanStaticUntaggedEgressList3073to4094 VlanList4, rldot1qPortVlanStaticForbiddenList1to1024 VlanList1, rldot1qPortVlanStaticForbiddenList1025to2048 VlanList2, rldot1qPortVlanStaticForbiddenList2049to3072 VlanList3, rldot1qPortVlanStaticForbiddenList3073to4094 VlanList4 } rldot1qPortVlanStaticEgressList1to1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-write STATUS current DESCRIPTION "The port egress vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 1 } rldot1qPortVlanStaticEgressList1025to2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-write STATUS current DESCRIPTION "The port egress vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 2 } rldot1qPortVlanStaticEgressList2049to3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-write STATUS current DESCRIPTION "The port egress vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 3 } rldot1qPortVlanStaticEgressList3073to4094 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-write STATUS current DESCRIPTION "The port egress vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 4} rldot1qPortVlanStaticUntaggedEgressList1to1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-write STATUS current DESCRIPTION "The port egress untagged vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 5 } rldot1qPortVlanStaticUntaggedEgressList1025to2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-write STATUS current DESCRIPTION "The port egress untagged vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 6 } rldot1qPortVlanStaticUntaggedEgressList2049to3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-write STATUS current DESCRIPTION "The port egress untagged vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 7 } rldot1qPortVlanStaticUntaggedEgressList3073to4094 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-write STATUS current DESCRIPTION "The port egress untagged vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 8} rldot1qPortVlanStaticForbiddenList1to1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-write STATUS current DESCRIPTION "The port forbidden vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 9 } rldot1qPortVlanStaticForbiddenList1025to2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-write STATUS current DESCRIPTION "The port forbidden vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 10 } rldot1qPortVlanStaticForbiddenList2049to3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-write STATUS current DESCRIPTION "The port forbidden vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 11 } rldot1qPortVlanStaticForbiddenList3073to4094 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-write STATUS current DESCRIPTION "The port forbidden vlan static list.Default value is {0}" DEFVAL {'00'H} ::= { rldot1qPortVlanStaticEntry 12} rldot1qVlanStaticListTable OBJECT-TYPE SYNTAX SEQUENCE OF Rldot1qVlanStaticListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains only one entry of a static vlan list." ::= { vlan 69 } rldot1qVlanStaticListEntry OBJECT-TYPE SYNTAX Rldot1qVlanStaticListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Staticly created by local or network management vlan list" INDEX {rldot1qVlanStaticListIndex} ::= { rldot1qVlanStaticListTable 1 } Rldot1qVlanStaticListEntry ::=SEQUENCE { rldot1qVlanStaticListIndex INTEGER, rldot1qVlanStaticList1to1024 VlanList1, rldot1qVlanStaticList1025to2048 VlanList2, rldot1qVlanStaticList2049to3072 VlanList3, rldot1qVlanStaticList3073to4094 VlanList4 } rldot1qVlanStaticListIndex OBJECT-TYPE SYNTAX INTEGER { static(0), dynamicGvrp(1), dynamicRava(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "An index is entrie's sequence. This field substitutes a vlan type. If the vlan was created by user configuration then the type is static. If the vlan was created by GVRP/MVRP protocols then the type is dynamicGvrp. If the vlan was created by Radius server attribute assignment mechanism then the type is dynamicRava. current includes all vlans which are exist in dot1qVlanCurrentTable." ::= { rldot1qVlanStaticListEntry 1} rldot1qVlanStaticList1to1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-write STATUS current DESCRIPTION "A list of staticaly created vlans from 1 to 1024." ::= { rldot1qVlanStaticListEntry 2} rldot1qVlanStaticList1025to2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-write STATUS current DESCRIPTION "A list of according to the type field created vlans from 1025 to 2048." DEFVAL {'00'H} ::= { rldot1qVlanStaticListEntry 3} rldot1qVlanStaticList2049to3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-write STATUS current DESCRIPTION "A list of according to the type field created vlans from 2049 to 3072." DEFVAL {'00'H} ::= { rldot1qVlanStaticListEntry 4} rldot1qVlanStaticList3073to4094 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-write STATUS current DESCRIPTION "A list of according to the type field created vlans from 3073 to 4094." DEFVAL {'00'H} ::= { rldot1qVlanStaticListEntry 5} rldot1qVlanStaticNameTable OBJECT-TYPE SYNTAX SEQUENCE OF Rldot1qVlanStaticNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains created by user vlans names." ::= { vlan 70 } rldot1qVlanStaticNameEntry OBJECT-TYPE SYNTAX Rldot1qVlanStaticNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Staticly created by local or network management vlan list" INDEX {dot1qVlanIndex} ::= { rldot1qVlanStaticNameTable 1 } Rldot1qVlanStaticNameEntry ::=SEQUENCE { rldot1qVlanStaticName SnmpAdminString } rldot1qVlanStaticName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively assigned string,which may be used to identify the VLAN. The VLAN name must be unique or no name." REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1" DEFVAL {""} ::= { rldot1qVlanStaticNameEntry 1} rlPortVlanTriplePlayMulticastTvTable OBJECT-TYPE SYNTAX SEQUENCE OF RlPortVlanTriplePlayMulticastTvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table saves a list of vlans per port/lag." ::= { vlan 71 } rlPortVlanTriplePlayMulticastTvEntry OBJECT-TYPE SYNTAX RlPortVlanTriplePlayMulticastTvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Triple Play Multicast Tv table." INDEX {ifIndex} ::= { rlPortVlanTriplePlayMulticastTvTable 1 } RlPortVlanTriplePlayMulticastTvEntry ::=SEQUENCE { rlPortVlanTriplePlayMulticastTvList1to1024 VlanList1, rlPortVlanTriplePlayMulticastTvList1025to2048 VlanList2, rlPortVlanTriplePlayMulticastTvList2049to3072 VlanList3, rlPortVlanTriplePlayMulticastTvList3073to4094 VlanList4 } rlPortVlanTriplePlayMulticastTvList1to1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-write STATUS current DESCRIPTION "A list of staticaly created Triple Play MTV vlans from 1 to 1024." ::= { rlPortVlanTriplePlayMulticastTvEntry 1} rlPortVlanTriplePlayMulticastTvList1025to2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-write STATUS current DESCRIPTION "A list of staticaly created Triple Play MTV vlans from 1025 to 2048." ::= { rlPortVlanTriplePlayMulticastTvEntry 2} rlPortVlanTriplePlayMulticastTvList2049to3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-write STATUS current DESCRIPTION "A list of staticaly created Triple Play MTV vlans from 2049 to 3072." ::= { rlPortVlanTriplePlayMulticastTvEntry 3} rlPortVlanTriplePlayMulticastTvList3073to4094 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-write STATUS current DESCRIPTION "A list of staticaly created Triple Play MTV vlans from 3073 to 4094." ::= { rlPortVlanTriplePlayMulticastTvEntry 4} rldot1qVlanMembershipTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF Rldot1qVlanMembershipTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains a bitmap of the VLAN owners(applications) that can create the VLAN and/or add a port to the VLAN." ::= { vlan 72 } rldot1qVlanMembershipTypeEntry OBJECT-TYPE SYNTAX Rldot1qVlanMembershipTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Staticly or dynamicly created VLAN ID owner entry" INDEX {dot1qVlanIndex} ::= { rldot1qVlanMembershipTypeTable 1 } Rldot1qVlanMembershipTypeEntry ::=SEQUENCE { rldot1qVlanMembershipTypeBitmap INTEGER } rldot1qVlanMembershipTypeBitmap OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This field contains a bitmap of owners that can creates and/or add a port to the VLAN. There exist three such type of owners : Default VLAN Manual created VLAN Dynamic(RAVA)created VLAN GVRP(MVRP)created VLAN " ::= { rldot1qVlanMembershipTypeEntry 1} rlRspanRemoteVlan OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "1-4094 actual vlan (must exist in dot1qvlan static table)" DEFVAL { 4094 } ::= { vlan 73 } -- vlan mapping vlanMappingEthType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet Type used for VLAN Mapping tunnel" DEFVAL { 33024 } ::= { vlan 74 } --vlanMappingTunnel - definition vlanMappingTunnelEdgePortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanMappingTunnelEdgePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tables contains vlan mapping tunnel mode port configuration entries." ::= { vlan 75} vlanMappingTunnelEdgePortConfigEntry OBJECT-TYPE SYNTAX VlanMappingTunnelEdgePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry contains port ifIndex, ethernet type value and L2protocol behavior for Edge port." INDEX { ifIndex } ::= { vlanMappingTunnelEdgePortConfigTable 1 } VlanMappingTunnelEdgePortConfigEntry::=SEQUENCE{ vlanMappingTunnelEdgePortConfigVlanId VlanIndex, vlanMappingTunnelEdgePortConfigCos INTEGER, vlanMappingTunnelEdgePortConfigDropThreshold INTEGER, vlanMappingTunnelEdgePortConfigShutdownThreshold INTEGER, vlanMappingTunnelEdgePortConfigForwardCDP TruthValue, vlanMappingTunnelEdgePortConfigForwardLLDP TruthValue, vlanMappingTunnelEdgePortConfigForwardSTP TruthValue, vlanMappingTunnelEdgePortConfigForwardVTP TruthValue } vlanMappingTunnelEdgePortConfigVlanId OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies S-VLAN-ID used to encapsulate of forwarded untagged Layer 2 frames." ::= { vlanMappingTunnelEdgePortConfigEntry 1 } vlanMappingTunnelEdgePortConfigCos OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify class of service (CoS) value into S-VLAN tag of forwarded Layer 2 frames." DEFVAL { 8 } ::= { vlanMappingTunnelEdgePortConfigEntry 2 } vlanMappingTunnelEdgePortConfigDropThreshold OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Set a drop threshold for received forwarded L2 protocol frames in kbps resolution." DEFVAL { 32 } ::= { vlanMappingTunnelEdgePortConfigEntry 3 } vlanMappingTunnelEdgePortConfigShutdownThreshold OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "Set a shutdown threshold for received forwarded L2 protocol frames in packets-per-second resolution." ::= { vlanMappingTunnelEdgePortConfigEntry 4 } vlanMappingTunnelEdgePortConfigForwardCDP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure CDP forward over the Provider network untagged Layer 2 frames received." DEFVAL { false } ::= { vlanMappingTunnelEdgePortConfigEntry 5 } vlanMappingTunnelEdgePortConfigForwardLLDP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure LLDP forward over the Provider network untagged Layer 2 frames received." DEFVAL { false } ::= { vlanMappingTunnelEdgePortConfigEntry 6 } vlanMappingTunnelEdgePortConfigForwardSTP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure STP forward over the Provider network untagged Layer 2 frames received." DEFVAL { false } ::= { vlanMappingTunnelEdgePortConfigEntry 7 } vlanMappingTunnelEdgePortConfigForwardVTP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure VTP forward over the Provider network untagged Layer 2 frames received." DEFVAL { false } ::= { vlanMappingTunnelEdgePortConfigEntry 8 } --vlanMappingTunnelNniPortConfigTable vlanMappingTunnelNniPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanMappingTunnelNniPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains vlan mapping tunnel mode port configuration entries." ::= { vlan 76} vlanMappingTunnelNniPortConfigEntry OBJECT-TYPE SYNTAX VlanMappingTunnelNniPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry contains port ifIndex, ethernet type value for NNI port." INDEX { ifIndex } ::= { vlanMappingTunnelNniPortConfigTable 1 } VlanMappingTunnelNniPortConfigEntry::=SEQUENCE{ vlanMappingTunnelNniPortConfigEthTypeValue INTEGER, vlanMappingTunnelNniPortConfigRowStatus RowStatus } vlanMappingTunnelNniPortConfigEthTypeValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated ethernet type. Default is 0x8100. " DEFVAL { 8100 } ::= { vlanMappingTunnelNniPortConfigEntry 1 } vlanMappingTunnelNniPortConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vlanMappingTunnelNniPortConfigEntry 2 } VlanMappingTunnelPortType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "VLAN mapping port type: 1 - edge 2 - NNI." SYNTAX INTEGER { edge(1), nni(2) } VlanMappingTunnelPortMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "VLAN mapping port mode: 1 - QinQ 2 - selective QinQ." SYNTAX INTEGER { qinq(1), selqinq(2) } VlanMappingDefaultConfigMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "VLAN mapping default VLAN configuration: 1 - set 2 - unset." SYNTAX INTEGER { set(1), unset(2) } VlanMappingActionConfigMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "VLAN mapping action for S-VLAN configuration: 1 - forward 2 - drop." SYNTAX INTEGER { forward(1), drop(2) } -- vlanMappingTunnelEdgePortTable vlanMappingTunnelEdgePortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanMappingTunnelEdgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tables contains vlan mapping tunnel mode port." ::= { vlan 77} vlanMappingTunnelEdgePortEntry OBJECT-TYPE SYNTAX VlanMappingTunnelEdgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry contains VLAN mapping configuration for edge port, C-VLAN and S-VLAN." INDEX { ifIndex, vlanMappingTunnelEdgePortCVlanTag} ::= { vlanMappingTunnelEdgePortTable 1 } VlanMappingTunnelEdgePortEntry::=SEQUENCE{ vlanMappingTunnelEdgePortCVlanTag VlanIndex, vlanMappingTunnelEdgePortSVlanTag VlanIndex, vlanMappingTunnelEdgePortDefaultConfig VlanMappingDefaultConfigMode, vlanMappingTunnelEdgePortActionConfig VlanMappingActionConfigMode, vlanMappingTunnelEdgePortIsActiveEdge VlanMappingTunnelPortType, vlanMappingTunnelEdgePortMapMode VlanMappingTunnelPortMode, vlanMappingTunnelEdgePortRowStatus RowStatus } vlanMappingTunnelEdgePortCVlanTag OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "C-VLAN value to be encapsulated." ::= { vlanMappingTunnelEdgePortEntry 1 } vlanMappingTunnelEdgePortSVlanTag OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "S-VLAN value." ::= { vlanMappingTunnelEdgePortEntry 2 } vlanMappingTunnelEdgePortDefaultConfig OBJECT-TYPE SYNTAX VlanMappingDefaultConfigMode MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN mapping default VLAN configuration exists." DEFVAL { 2 } ::= { vlanMappingTunnelEdgePortEntry 3 } vlanMappingTunnelEdgePortActionConfig OBJECT-TYPE SYNTAX VlanMappingActionConfigMode MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN mapping action defined." DEFVAL { 1 } ::= { vlanMappingTunnelEdgePortEntry 4 } vlanMappingTunnelEdgePortIsActiveEdge OBJECT-TYPE SYNTAX VlanMappingTunnelPortType MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN mapping port type - edge or NNI." DEFVAL { 2 } ::= { vlanMappingTunnelEdgePortEntry 5 } vlanMappingTunnelEdgePortMapMode OBJECT-TYPE SYNTAX VlanMappingTunnelPortMode MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN mapping port mode - QinQ or selective QinQ." DEFVAL { 2 } ::= { vlanMappingTunnelEdgePortEntry 6 } vlanMappingTunnelEdgePortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "he row status variable, used according to row installation and removal conventions." ::= { vlanMappingTunnelEdgePortEntry 7 } -- vlanMappingOneToOneEdgePortTable vlanMappingOneToOneEdgePortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanMappingOneToOneEdgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tables contains vlan mapping tunnel mode port." ::= { vlan 78} vlanMappingOneToOneEdgePortEntry OBJECT-TYPE SYNTAX VlanMappingOneToOneEdgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry contains VLAN mapping configuration for Nni port, C-VLAN and S-VLAN." INDEX { ifIndex, vlanMappingOneToOneEdgePortCVlanTag } ::= { vlanMappingOneToOneEdgePortTable 1 } VlanMappingOneToOneEdgePortEntry::=SEQUENCE{ vlanMappingOneToOneEdgePortCVlanTag VlanIndex, vlanMappingOneToOneEdgePortSVlanTag VlanIndex, vlanMappingOneToOneEdgePortIsActiveEdge VlanMappingTunnelPortType, vlanMappingOneToOneEdgePortRowStatus RowStatus } vlanMappingOneToOneEdgePortCVlanTag OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "C-VLAN value to be encapsulated." ::= { vlanMappingOneToOneEdgePortEntry 1 } vlanMappingOneToOneEdgePortSVlanTag OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "S-VLAN value." ::= { vlanMappingOneToOneEdgePortEntry 2 } vlanMappingOneToOneEdgePortIsActiveEdge OBJECT-TYPE SYNTAX VlanMappingTunnelPortType MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN mapping port type - edge or NNI." DEFVAL { 2 } ::= { vlanMappingOneToOneEdgePortEntry 3 } vlanMappingOneToOneEdgePortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "he row status variable, used according to row installation and removal conventions." ::= { vlanMappingOneToOneEdgePortEntry 4 } vlanMappingCosValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Class of service (CoS) value globally into S-VLAN tag of forwarded Layer 2 frames." DEFVAL { 5 } ::= { vlan 79 } -- next free ::= {vlan 80} END