-- ***************************************************************** -- OLD-CISCO-SYS-MIB.my: Cisco System MIB file -- -- July 1994, Jeffrey T. Johnson -- -- Copyright (c) 1994-1996 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- -- Prior to 10.2, Cisco's lsystem mib group contained a curious -- assortment of mib objects. For 10.2, in order to allow similar -- objects to be compiled separately with the mib compiler, the -- lsystem group was separated into an envmon group (lenv), a cpu -- group (lcpu), a memory group (lmem), and a system group (lsystem). -- In order to preserve the OBJECT IDENTIFIERS from release 10.1 to -- 10.2, however, all four groups are still based at { local 1 }. -- This is fine from the mib compiler point-of-view, but causes -- problems for some test tools which don't like the fact that -- lsystem, lenv, lmem, and lcpu all have the same OBJECT IDENTIFIER. -- In order to work around this problem, this file exists which -- is a combination of the four 10.2 "system" mibs, with everything -- falling under the lsystem group (as it did in 10.1). -- -- This mib should only be used as a replacement for the four separate -- system mibs (OLD-CISCO-CPU.my, OLD-CISCO-ENVMON-MIB.my, -- OLD-CISCO-MEMORY-MIB.my, OLD-CISCO-SYSTEM-MIB.my) in test tool -- environments. The aforementioned mibs should always be used in -- code generation OLD-CISCO-SYS-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB local FROM CISCO-SMI; lsystem OBJECT IDENTIFIER ::= { local 1 } -- Local Variable Section -- This section describes the local variables within the cisco -- product line. Groups may or may not be present depending -- on the software options present in the managed device. -- Local System Group -- This group is present in all products. romId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains a printable octet string which contains the System Bootstrap description and version identification." ::= { lsystem 1 } whyReload OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains a printable octet string which contains the reason why the system was last restarted." ::= { lsystem 2 } hostName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the name of the host in printable ascii characters." ::= { lsystem 3 } domainName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable is the domain portion of the domain name of the host." ::= { lsystem 4 } authAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the last SNMP authorization failure IP address." ::= { lsystem 5 } bootHost OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Contains the IP address of the host that supplied the currently running software." ::= { lsystem 6 } ping OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "The ping mib object is obsolete as of IOS 10.2 It has been superseded by the Cisco Ping MIB" ::= { lsystem 7 } freeMem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "The freeMem mib object is obsolete as of IOS 11.1 It has been replaced with the cisco memory pool mib" ::= { lsystem 8 } bufferElFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free buffer elements." ::= { lsystem 9 } bufferElMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of buffer elements." ::= { lsystem 10 } bufferElHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of buffer element hits." ::= { lsystem 11 } bufferElMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of buffer element misses." ::= { lsystem 12 } bufferElCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of buffer element creates." ::= { lsystem 13 } bufferSmSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the size of small buffers." ::= { lsystem 14 } bufferSmTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of small buffers." ::= { lsystem 15 } bufferSmFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free small buffers." ::= { lsystem 16 } bufferSmMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of small buffers." ::= { lsystem 17 } bufferSmHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of small buffer hits." ::= { lsystem 18 } bufferSmMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of small buffer misses." ::= { lsystem 19 } bufferSmTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of small buffer trims." ::= { lsystem 20 } bufferSmCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of small buffer creates." ::= { lsystem 21 } bufferMdSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the size of medium buffers." ::= { lsystem 22 } bufferMdTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of medium buffers." ::= { lsystem 23 } bufferMdFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free medium buffers." ::= { lsystem 24 } bufferMdMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of medium buffers." ::= { lsystem 25 } bufferMdHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of medium buffer hits." ::= { lsystem 26 } bufferMdMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of medium buffer misses." ::= { lsystem 27 } bufferMdTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of medium buffer trims." ::= { lsystem 28 } bufferMdCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of medium buffer creates." ::= { lsystem 29 } bufferBgSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the size of big buffers." ::= { lsystem 30 } bufferBgTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of big buffers." ::= { lsystem 31 } bufferBgFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free big buffers." ::= { lsystem 32 } bufferBgMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of big buffers." ::= { lsystem 33 } bufferBgHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of big buffer hits." ::= { lsystem 34 } bufferBgMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of big buffer misses." ::= { lsystem 35 } bufferBgTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of big buffer trims." ::= { lsystem 36 } bufferBgCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of big buffer creates." ::= { lsystem 37 } bufferLgSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the size of large buffers." ::= { lsystem 38 } bufferLgTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of large buffers." ::= { lsystem 39 } bufferLgFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free large buffers." ::= { lsystem 40 } bufferLgMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of large buffers." ::= { lsystem 41 } bufferLgHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of large buffer hits." ::= { lsystem 42 } bufferLgMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of large buffer misses." ::= { lsystem 43 } bufferLgTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of large buffer trims." ::= { lsystem 44 } bufferLgCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of large buffer creates." ::= { lsystem 45 } bufferFail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of buffer allocation failures." ::= { lsystem 46 } bufferNoMem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of buffer create failures due to no free memory." ::= { lsystem 47 } netConfigAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Holds the address of the host that supplied the network-confg file." ::= { lsystem 48 } netConfigName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Holds the name of the network configuration file." ::= { lsystem 49 } netConfigSet OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Cause the loading of a new network-confg file using TFTP." ::= { lsystem 50 } hostConfigAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS obsolete DESCRIPTION "Contains the address of the host that provided the host-config file." ::= { lsystem 51 } hostConfigName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "Contains the name of the last configured host-confg file." ::= { lsystem 52 } hostConfigSet OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS obsolete DESCRIPTION "Cause the loading of a new host-confg file using TFTP." ::= { lsystem 53 } writeMem OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "Write configuration into non-volatile memory / erase config memory if 0." ::= { lsystem 54 } writeNet OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Write configuration to host using TFTP." ::= { lsystem 55 } busyPer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CPU busy percentage in the last 5 second period. Not the last 5 realtime seconds but the last 5 second period in the scheduler." ::= { lsystem 56 } avgBusy1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "1 minute exponentially-decayed moving average of the CPU busy percentage." ::= { lsystem 57 } avgBusy5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "5 minute exponentially-decayed moving average of the CPU busy percentage." ::= { lsystem 58 } idleCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "cisco internal variable. not to be used" ::= { lsystem 59 } idleWired OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "cisco internal variable. not to be used" ::= { lsystem 60 } ciscoContactInfo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "cisco's name and address" ::= { lsystem 61 } bufferHgSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the size of huge buffers." ::= { lsystem 62 } bufferHgTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of huge buffers." ::= { lsystem 63 } bufferHgFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free huge buffers." ::= { lsystem 64 } bufferHgMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of huge buffers." ::= { lsystem 65 } bufferHgHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of huge buffer hits." ::= { lsystem 66 } bufferHgMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of huge buffer misses." ::= { lsystem 67 } bufferHgTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of huge buffer trims." ::= { lsystem 68 } bufferHgCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of huge buffer creates." ::= { lsystem 69 } netConfigProto OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Holds the protocol that supplied the network-confg file." ::= { lsystem 70 } hostConfigProto OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Holds the protocol that supplied the host- confg file." ::= { lsystem 71 } sysConfigAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Holds the address of the host that supplied the system boot image." ::= { lsystem 72 } sysConfigName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Holds the name of the system boot image." ::= { lsystem 73 } sysConfigProto OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Holds the protocol that supplied the system boot image." ::= { lsystem 74 } sysClearARP OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "Perform a clearing of the entire ARP cache and invalidation of route caches." ::= { lsystem 75 } sysClearInt OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "Clear interface given IfIndex as value." ::= { lsystem 76 } envPresent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Is there an environmental monitor card in this box?, 0 - No, 1-AGS card present, wrong firmware, 2-AGS CARD present, firmware ok, 3-7000 support" ::= { lsystem 77 } envTestPt1Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 1. Typically ambient air or the temperature of air entering the router" ::= { lsystem 78 } envTestPt1Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 1. Typically a temperature in centigrade." ::= { lsystem 79 } envTestPt2Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 2. Typically airflow or the temperature of air leaving the router" ::= { lsystem 80 } envTestPt2Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 2. Typically a temperature in centigrade." ::= { lsystem 81 } envTestPt3Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 3. Typically +5 volt" ::= { lsystem 82 } envTestPt3Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 3. Typically the value in millivolts of the +5v supply" ::= { lsystem 83 } envTestPt4Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 4. Typically +12 volt" ::= { lsystem 84 } envTestPt4Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 4. Typically the value in millivolts of the +12v supply" ::= { lsystem 85 } envTestPt5Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 5. Typically -12 volt" ::= { lsystem 86 } envTestPt5Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 5. Typically the value in millivolts of the -12v supply" ::= { lsystem 87 } envTestPt6Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 6. Typically -5 volt" ::= { lsystem 88 } envTestPt6Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 6. Typically the value in millivolts of the -5v supply" ::= { lsystem 89 } envTestPt1MarginVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value at which the router will shutdown. Typically the ambient air temperature that will shut the router down. (e.g. 43)" ::= { lsystem 90 } envTestPt2MarginVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value at which the router will shutdown. Typically the airflow air temperature that will shut the router down. (e.g. 58)" ::= { lsystem 91 } envTestPt3MarginPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "+/- Percentage that will shut the router down, (e.g. 10%) typically +5 volt" ::= { lsystem 92 } envTestPt4MarginPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "+/- Percentage that will shut the router down, (e.g. 15%) typically +12 volt" ::= { lsystem 93 } envTestPt5MarginPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "+/- Percentage that will shut the router down, (e.g. 15%) typically -12 volt" ::= { lsystem 94 } envTestPt6MarginPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "+/- Percentage that will shut the router down, (e.g. 10%) typically -5 volt" ::= { lsystem 95 } envTestPt1last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt1 when last shutdown occurred." ::= { lsystem 96 } envTestPt2last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt2 when last shutdown occurred." ::= { lsystem 97 } envTestPt3last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt3 when last shutdown occurred." ::= { lsystem 98 } envTestPt4last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt4 when last shutdown occurred." ::= { lsystem 99 } envTestPt5last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt5 when last shutdown occurred." ::= { lsystem 100 } envTestPt6last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt6 when last shutdown occurred." ::= { lsystem 101 } envTestPt1warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lsystem 102 } envTestPt2warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lsystem 103 } envTestPt3warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lsystem 104 } envTestPt4warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lsystem 105 } envTestPt5warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lsystem 106 } envTestPt6warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lsystem 107 } envFirmVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of Environmental Card firmware" ::= { lsystem 108 } envTechnicianID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Technician ID" ::= { lsystem 109 } envType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The type of environmental card" ::= { lsystem 110 } envBurnDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The calibration / burn in date" ::= { lsystem 111 } envSerialNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Serial Number of environmental monitor card" ::= { lsystem 112 } END