-- =============================================================================
-- Copyright (c) 2004-2012 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description:
--   The file defines a MIB to provide spectrum analysis information.
-- Reference:
-- Version: V1.0
-- History:
--   V1.0 Created by Wang Lu
--     Initial version 2011-08-05
-- =============================================================================
HH3C-DOT11-SA-MIB DEFINITIONS ::= BEGIN

IMPORTS
        TruthValue,
        DateAndTime
    FROM SNMPv2-TC
        MODULE-IDENTITY,
        Integer32, Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE
    FROM SNMPv2-SMI
        hh3cDot11,
        Hh3cDot11ChannelScopeType,
        Hh3cDot11ObjectIDType,
        Hh3cDot11RadioScopeType,
        Hh3cDot11SaIntfDevType
    FROM HH3C-DOT11-REF-MIB;

hh3cDot11Sa MODULE-IDENTITY
    LAST-UPDATED "201108262000Z"        -- Aug 26, 2011 at 20:00 GMT
    ORGANIZATION
        "New H3C Tech. Co., Ltd."
    CONTACT-INFO
        "Platform Team New H3C Tech. Co., Ltd.
        Hai-Dian District Beijing P.R. China
        http://www.h3c.com
        Zip:100085
        "
    DESCRIPTION
        "This MIB module provides spectrum analysis information.
        The initial revision of this MIB module.

        The spectrum analysis module on APs is able to examine the radio
        frequency (RF) environment in which the Wi-Fi network is operating,
        identify interference and classify its sources. An analysis of the
        results can then be used to quickly isolate issues with packet
        transmission, channel quality, and traffic congestion caused by
        contention with other devices operating in the same band or channel."
    REVISION "201108262000Z"
    DESCRIPTION
        "The initial revision of this MIB module."
    ::= { hh3cDot11 13 }

-- *****************************************************************************
-- *  Major sections
-- *****************************************************************************

hh3cDot11SaCfgGroup OBJECT IDENTIFIER  ::= { hh3cDot11Sa 1 }
hh3cDot11SaStatusGroup OBJECT IDENTIFIER  ::= { hh3cDot11Sa 2 }
hh3cDot11SaNotifyGroup OBJECT IDENTIFIER  ::= { hh3cDot11Sa 3 }

-- cfg table
hh3cDot11SaCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cDot11SaCfgEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table is used to configure spectrum analysis."
    ::= { hh3cDot11SaCfgGroup 1 }

hh3cDot11SaCfgEntry OBJECT-TYPE
    SYNTAX Hh3cDot11SaCfgEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This entry contains the spectrum analysis configuration."
    INDEX { hh3cDot11SaCfgRadioType }
    ::= { hh3cDot11SaCfgTable 1 }

Hh3cDot11SaCfgEntry ::= SEQUENCE
    {
        hh3cDot11SaCfgRadioType       INTEGER,
        hh3cDot11SaEnable             TruthValue,
        hh3cDot11SaRptDevType         BITS,
        hh3cDot11SaTrapDevEnable      TruthValue,
        hh3cDot11SaTrapDevType        BITS,
        hh3cDot11SaTrapAQEnable       TruthValue,
        hh3cDot11SaTrapAQThreshold    Integer32,
        hh3cDot11SaDrivenRRMEnable    TruthValue,
        hh3cDot11SaDrivenRRMSnt       INTEGER
    }

hh3cDot11SaCfgRadioType OBJECT-TYPE
    SYNTAX INTEGER
    {
        dot11bg(1),
        dot11a(2)
    }
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Represents the radio type of the configuration."
    ::= { hh3cDot11SaCfgEntry 1 }

hh3cDot11SaEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Represents whether spectrum analysis is enabled globally."
    ::= { hh3cDot11SaCfgEntry 2 }

hh3cDot11SaRptDevType OBJECT-TYPE
    SYNTAX BITS
        {
            microwave(0),
            microwaveInverter(1),
            bluetooth(2),
            fixedFreqOthers(3),
            fixedFreqCordlessPhone(4),
            fixedFreqVideo(5),
            fixedFreqAudio(6),
            freqHopperOthers(7),
            freqHopperCordlessBase(8),
            freqHopperCordlessNetwork(9),
            freqHopperXbox(10),
            genericInterferer(11)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Represents which types of interference devices should be reported."
    ::= { hh3cDot11SaCfgEntry 3 }

hh3cDot11SaTrapDevEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Represents whether the interference device trap is enabled."
    ::= { hh3cDot11SaCfgEntry 4 }

hh3cDot11SaTrapDevType OBJECT-TYPE
    SYNTAX BITS
        {
            microwave(0),
            microwaveInverter(1),
            bluetooth(2),
            fixedFreqOthers(3),
            fixedFreqCordlessPhone(4),
            fixedFreqVideo(5),
            fixedFreqAudio(6),
            freqHopperOthers(7),
            freqHopperCordlessBase(8),
            freqHopperCordlessNetwork(9),
            freqHopperXbox(10),
            genericInterferer(11)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Represents which types of interference device will send traps
         when the interference device trap is enabled."
    ::= { hh3cDot11SaCfgEntry 5 }

hh3cDot11SaTrapAQEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Represents whether the air quality trap is enabled."
    ::= { hh3cDot11SaCfgEntry 6 }

hh3cDot11SaTrapAQThreshold OBJECT-TYPE
    SYNTAX Integer32(1..100)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Represents the air quality trap threshold.  When the air quality
        is below this value, the air quality trap will be sent."
    ::= { hh3cDot11SaCfgEntry 7 }

hh3cDot11SaDrivenRRMEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Configure whether to trigger RRM to run when an access point detects
         a certain level of interference."
    ::= { hh3cDot11SaCfgEntry 8 }

hh3cDot11SaDrivenRRMSnt OBJECT-TYPE
    SYNTAX INTEGER
    {
        low(1),
        medium(2),
        high(3)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Configure the threshold at which RRM will be triggered.  When the
         interference level for the access point rises above the threshold
         level, RRM initiates a local dynamic channel assignment (DCA) run
         and changes the channel of the affected access point radio if
         possible to improve network performance.  Low represents a decreased
         sensitivity to changes in the environment while high represents an
         increased sensitivity."
    ::= { hh3cDot11SaCfgEntry 9 }

-- fft table
hh3cDot11SaRtFFTDataTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cDot11SaRtFFTDataEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains the real-time FFT data for spectrum analysis."
    ::= { hh3cDot11SaStatusGroup 1 }

hh3cDot11SaRtFFTDataEntry OBJECT-TYPE
    SYNTAX Hh3cDot11SaRtFFTDataEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This entry contains the real-time FFT data for spectrum analysis."
    INDEX
        {
            hh3cDot11SaAPID,
            hh3cDot11SaRadioID,
            hh3cDot11SaRtDataGroupID,
            hh3cDot11SaFrequency
        }
    ::= { hh3cDot11SaRtFFTDataTable 1 }

Hh3cDot11SaRtFFTDataEntry ::= SEQUENCE
    {
        hh3cDot11SaAPID               Hh3cDot11ObjectIDType,
        hh3cDot11SaRadioID            Hh3cDot11RadioScopeType,
        hh3cDot11SaRtDataGroupID      Integer32,
        hh3cDot11SaFrequency          Integer32,
        hh3cDot11SaRtFreqPower        Integer32,
        hh3cDot11SaRtFreqMaxPower     Integer32,
        hh3cDot11SaRtFreqDutyCycle    Integer32,
        hh3cDot11SaRtFreqDataSeqNo    Unsigned32
    }

hh3cDot11SaAPID OBJECT-TYPE
    SYNTAX Hh3cDot11ObjectIDType
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Represents the serial ID of the AP."
    ::= { hh3cDot11SaRtFFTDataEntry 1 }

hh3cDot11SaRadioID OBJECT-TYPE
    SYNTAX Hh3cDot11RadioScopeType
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Represents the ID of the radio."
    ::= { hh3cDot11SaRtFFTDataEntry 2 }

hh3cDot11SaRtDataGroupID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Represents group ID of the collected data.  Maybe the device collects
         multiple groups of data at the collected interval."
    ::= { hh3cDot11SaRtFFTDataEntry 3 }

hh3cDot11SaFrequency OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Represents the frequency number in 100 Hz."
    ::= { hh3cDot11SaRtFFTDataEntry 4 }

hh3cDot11SaRtFreqPower OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents the power of the frequency point."
    ::= { hh3cDot11SaRtFFTDataEntry 5 }

hh3cDot11SaRtFreqMaxPower OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents the max power of the frequency point."
    ::= { hh3cDot11SaRtFFTDataEntry 6 }

hh3cDot11SaRtFreqDutyCycle OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents the duty cycle of the frequency point."
    ::= { hh3cDot11SaRtFFTDataEntry 7 }

hh3cDot11SaRtFreqDataSeqNo OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents the sequence number of the data."
    ::= { hh3cDot11SaRtFFTDataEntry 8 }

-- interfering device table
hh3cDot11SaIntfDevTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cDot11SaIntfDevEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains the information of the interfering devices."
    ::= { hh3cDot11SaStatusGroup 2 }

hh3cDot11SaIntfDevEntry OBJECT-TYPE
    SYNTAX Hh3cDot11SaIntfDevEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This entry contains the information of the interfering devices."
    INDEX
        {
            hh3cDot11SaAPID,
            hh3cDot11SaRadioID,
            hh3cDot11SaDevID
        }
    ::= { hh3cDot11SaIntfDevTable 1 }

Hh3cDot11SaIntfDevEntry ::= SEQUENCE
    {
        hh3cDot11SaDevID              Integer32,
        hh3cDot11SaDevType            Hh3cDot11SaIntfDevType,
        hh3cDot11SaDevSI              Integer32,
        hh3cDot11SaDevRSSI            Integer32,
        hh3cDot11SaDevDutyCycle       Integer32,
        hh3cDot11SaDevAffectedChls    OCTET STRING,
        hh3cDot11SaDevDetectedTime    DateAndTime
    }

hh3cDot11SaDevID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Represents the device identification number that uniquely
         identified the interfering device."
    ::= { hh3cDot11SaIntfDevEntry 1 }

hh3cDot11SaDevType OBJECT-TYPE
    SYNTAX Hh3cDot11SaIntfDevType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents type of the interferer."
    ::= { hh3cDot11SaIntfDevEntry 2 }

hh3cDot11SaDevSI OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents severity index of the interfering device.  Severity index
         is calculated, a positive integer between 0 and 100(with 100 being the
         most severe)."
    ::= { hh3cDot11SaIntfDevEntry 3 }

hh3cDot11SaDevRSSI OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents receive signal strength indicator (RSSI) of interfering
         device."
    ::= { hh3cDot11SaIntfDevEntry 4 }

hh3cDot11SaDevDutyCycle OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents proportion of time in percentage during which the
         interfering device was active."
    ::= { hh3cDot11SaIntfDevEntry 5 }

hh3cDot11SaDevAffectedChls OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents channels that the interfering device affects."
    ::= { hh3cDot11SaIntfDevEntry 6 }

hh3cDot11SaDevDetectedTime OBJECT-TYPE
    SYNTAX DateAndTime
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents time at which the interference was detected."
    ::= { hh3cDot11SaIntfDevEntry 7 }

-- air quality table
hh3cDot11SaAirQualityTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cDot11SaAirQualityEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains the air quality of the channels."
    ::= { hh3cDot11SaStatusGroup 3 }

hh3cDot11SaAirQualityEntry OBJECT-TYPE
    SYNTAX Hh3cDot11SaAirQualityEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This entry contains the air quality of the channels."
    INDEX
        {
            hh3cDot11SaAPID,
            hh3cDot11SaRadioID,
            hh3cDot11SaChlNum
        }
    ::= { hh3cDot11SaAirQualityTable 1 }

Hh3cDot11SaAirQualityEntry ::= SEQUENCE
    {
        hh3cDot11SaChlNum             Hh3cDot11ChannelScopeType,
        hh3cDot11SaAvgQuality         Integer32,
        hh3cDot11SaMinQuality         Integer32,
        hh3cDot11SaIntfDevNum         Integer32,
        hh3cDot11SaWiFiUtil           Integer32,
        hh3cDot11SaNonWiFiUtil        Integer32,
        hh3cDot11SaNoiseFloor         Integer32
    }

hh3cDot11SaChlNum OBJECT-TYPE
    SYNTAX Hh3cDot11ChannelScopeType
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Represents the radio channel where the air quality is monitored."
    ::= { hh3cDot11SaAirQualityEntry 1 }

hh3cDot11SaAvgQuality OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents the average air quality for this radio channel."
    ::= { hh3cDot11SaAirQualityEntry 2 }

hh3cDot11SaMinQuality OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents the minimum air quality for this radio channel."
    ::= { hh3cDot11SaAirQualityEntry 3 }

hh3cDot11SaIntfDevNum OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents the number of interferers detected by the radios
         on the 802.11a/n or 802.11b/g/n radio band."
    ::= { hh3cDot11SaAirQualityEntry 4 }

hh3cDot11SaWiFiUtil OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents the percentage of the channel currently being
         used by Wi-Fi devices."
    ::= { hh3cDot11SaAirQualityEntry 5 }

hh3cDot11SaNonWiFiUtil OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents the percentage of the channel currently being
         used by non-Wi-Fi interference."
    ::= { hh3cDot11SaAirQualityEntry 6 }

hh3cDot11SaNoiseFloor OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Represents current noise floor recorded on the channel."
    ::= { hh3cDot11SaAirQualityEntry 7 }

--Notify Group
hh3cDot11SaTraps OBJECT IDENTIFIER  ::= { hh3cDot11SaNotifyGroup 0 }
hh3cDot11SaIntfDevDetected NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cDot11SaTrapAPID,
            hh3cDot11SaTrapRadioID,
            hh3cDot11SaTrapDevID,
            hh3cDot11SaTrapIntfDevType,
            hh3cDot11APTrapDevSI,
            hh3cDot11SaTrapDevRSSI,
            hh3cDot11APTrapDevDC,
            hh3cDot11APTrapDevChls,
            hh3cDot11APTrapDevDctTime
        }
    STATUS current
    DESCRIPTION
        "Interfering device is detected."
    ::= { hh3cDot11SaTraps 1 }

hh3cDot11SaIntfDevDisappear NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cDot11SaTrapAPID,
            hh3cDot11SaTrapRadioID,
            hh3cDot11SaTrapDevID,
            hh3cDot11SaTrapIntfDevType
        }
    STATUS current
    DESCRIPTION
        "Interfering device disappeared."
    ::= { hh3cDot11SaTraps 2 }

hh3cDot11SaChlQltLow NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cDot11SaTrapAPID,
            hh3cDot11SaTrapRadioID,
            hh3cDot11SaTrapChlNum,
            hh3cDot11SaTrapChlQlt,
            hh3cDot11SaTrapChlIntfNum
        }
    STATUS current
    DESCRIPTION
        "The quality of the channel is below the specified threshold."
    ::= { hh3cDot11SaTraps 3 }

hh3cDot11SaChlQltRecover NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cDot11SaTrapAPID,
            hh3cDot11SaTrapRadioID,
            hh3cDot11SaTrapChlNum,
            hh3cDot11SaTrapChlQlt,
            hh3cDot11SaTrapChlIntfNum
        }
    STATUS current
    DESCRIPTION
        "The quality of the channel recovered from low status."
    ::= { hh3cDot11SaTraps 4 }

hh3cDot11SaTrapVars OBJECT IDENTIFIER  ::= { hh3cDot11SaNotifyGroup 1 }

hh3cDot11SaTrapAPID OBJECT-TYPE
    SYNTAX      Hh3cDot11ObjectIDType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Represents the identifier of the AP."
    ::= { hh3cDot11SaTrapVars 1 }

hh3cDot11SaTrapRadioID OBJECT-TYPE
    SYNTAX      Hh3cDot11RadioScopeType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Represents the identifier of the radio."
    ::= { hh3cDot11SaTrapVars 2 }

hh3cDot11SaTrapDevID OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents the device identification number that uniquely
         identified the interfering device."
    ::= { hh3cDot11SaTrapVars 3 }

hh3cDot11SaTrapIntfDevType OBJECT-TYPE
    SYNTAX Hh3cDot11SaIntfDevType
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents type of the interferer."
    ::= { hh3cDot11SaTrapVars 4 }

hh3cDot11APTrapDevSI OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents severity index of the interfering device.  Severity index
         is calculated, a positive integer between 0 and 100(with 100 being the
         most severe)."
    ::= { hh3cDot11SaTrapVars 5 }

hh3cDot11SaTrapDevRSSI OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents receive signal strength indicator (RSSI) of interfering
         device."
    ::= { hh3cDot11SaTrapVars 6 }

hh3cDot11APTrapDevDC OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents proportion of time in percentage during which the
         interfering device was active."
    ::= { hh3cDot11SaTrapVars 7 }

hh3cDot11APTrapDevChls OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents channels that the interfering device affects."
    ::= { hh3cDot11SaTrapVars 8 }

hh3cDot11APTrapDevDctTime OBJECT-TYPE
    SYNTAX DateAndTime
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents time at which the interference was detected."
    ::= { hh3cDot11SaTrapVars 9 }

hh3cDot11SaTrapChlNum OBJECT-TYPE
    SYNTAX Hh3cDot11ChannelScopeType
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents the radio channel where the air quality is monitored."
    ::= { hh3cDot11SaTrapVars 10 }

hh3cDot11SaTrapChlQlt OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents the quality for this radio channel."
    ::= { hh3cDot11SaTrapVars 11 }

hh3cDot11SaTrapChlIntfNum OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Represents the number of interferers detected by the radios
         on the 802.11a/n or 802.11b/g/n radio band."
    ::= { hh3cDot11SaTrapVars 12 }
END