-- ============================================================================= -- Copyright (c) 2004-2015 New H3C Tech. Co., Ltd. All rights reserved. -- -- Description: -- This MIB module is for configuring and monitoring Fibre Channel -- over Ethernet (FCoE) related entities. -- Reference: -- Version: V1.2 -- History: -- V1.0 created by h06247 -- V1.1 Added hh3cFCoEFIPSnoopingTable by zhangchangjun 02876. -- Modified the range of hh3cFCoECfgDATov by wangyuqiang 08530. -- V1.2 Added hh3cFCoEVlanCfgTable by chengzhipeng 04378 2014-05-09 -- Modified the range of hh3cFCoECfgDATov by chengzhipeng 04378. -- Added hh3cFCoEFIPSnoopingFCFTable, hh3cFCoEFIPSnoopingENodeTable, -- hh3cFCoEFIPSnoopingVNTable and hh3cFCoEFIPSnoopingIfCfgTable by -- h06247 2014-11-12 -- ============================================================================= HH3C-FCOE-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cCommon FROM HH3C-OID-MIB MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] RowStatus, TimeStamp, TruthValue, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC -- [RFC2578] SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411] InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB -- [RFC2863] VlanIndex FROM Q-BRIDGE-MIB -- [RFC4363] T11FabricIndex FROM T11-TC-MIB -- [RFC4439] fcmInstanceIndex FROM FC-MGMT-MIB -- [RFC4044] Hh3cFcNameId FROM HH3C-FC-TC-MIB; hh3cFCoE MODULE-IDENTITY LAST-UPDATED "201411120000Z" ORGANIZATION "New H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085" DESCRIPTION "This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines a Virtual FC (VFC) Interface as an object that represents either a VF_Port or a VE_Port on an FCoE Forwarder (FCF). VFC interfaces can be created either statically (by management request) or dynamically (at the time of FIP based FLOGI or ELP request). Other terminologies used in this MIB are defined by the Hh3c FCoE standard, as defined in the FC-BB-5 specification. This MIB also supports configuration of the following objects: - Mapping of FCoE VLAN-ID used to carry traffic for a Fabric - FC-MAP value used by the FCF operating in FPMA mode - FIP snooping related objects" REVISION "201411120000Z" DESCRIPTION "Added hh3cFCoEFIPSnoopingFCFTable, hh3cFCoEFIPSnoopingENodeTable hh3cFCoEFIPSnoopingVNTable and hh3cFCoEFIPSnoopingIfCfgTable." REVISION "201203280000Z" DESCRIPTION "Initial version of this MIB module." ::= { hh3cCommon 120 } hh3cFCoEObjects OBJECT IDENTIFIER ::= { hh3cFCoE 1 } hh3cFCoEConfig OBJECT IDENTIFIER ::= { hh3cFCoEObjects 1 } Hh3cFCoEVfcBindType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines the different methods to identify (or bind to) - the ENode associated with a particular VF_Port VFC - the remote-FCF associated with a particular VE_Port VFC interfaceIndex(1) - This type is used only when an ENode or remote-FCF is directly connected to the local FCF via one of the local Ethernet interfaces, in which case the value contains the ifIndex of said Ethernet interface. macAddress(2) - This type is used when an ENode or remote-FCF is reachable from the local FCF over a (Layer-2) Ethernet network. A FIP frame from an ENode or remote-FCF is associated to a VFC only if the frame's source MAC address is the same as the MAC Address bound on that VFC." SYNTAX INTEGER { interfaceIndex(1), macAddress(2) } -- -- FCoE Globals per Switch in a Fibre Channel Management Instance -- Fibre Channel Management instance is defined in [RFC4044] as a -- separable managed instance of Fibre Channel functionality. -- Fibre Channel functionality may be grouped into Fibre -- Channel management instances in whatever way is most -- convenient for the implementation(s). -- -- RFC4044 also defines the fcmSwitchTable as a table of -- information about Fibre Channel switches which are managed -- by Fibre Channel management instances. Each Fibre Channel -- management instance can manage one or more Fibre Channel -- switches. The Switch Index, fcmSwitchIndex, is -- IMPORTed from the FC-MGMT-MIB as the index value -- to uniquely identify a Fibre Channel switch amongst -- those (one or more) managed by the same Fibre -- Channel management instance. -- In this MIB, the same fcmSwitchIndex is used to -- identify each FCF and to distinguish it from other -- FCFs and from other Fibre Channel switches. -- -- hh3cFCoECfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cFCoECfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table facilitates configuration of FCoE parameters on a per Fibre Channel management instance." ::= { hh3cFCoEConfig 1 } hh3cFCoECfgEntry OBJECT-TYPE SYNTAX Hh3cFCoECfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one entry in this table for each Fibre Channel management instance." INDEX { fcmInstanceIndex } ::= { hh3cFCoECfgTable 1 } Hh3cFCoECfgEntry ::= SEQUENCE { hh3cFCoECfgFcmap OCTET STRING, hh3cFCoECfgDynamicVfcCreation TruthValue, hh3cFCoECfgDefaultFCFPriority Unsigned32, hh3cFCoECfgDATov Unsigned32, hh3cFCoECfgAddressingMode INTEGER } hh3cFCoECfgFcmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the FC-MAP value used by the FCF when operating in FPMA mode. The default value is 0EFC00h, as written in the standard." REFERENCE "Fibre Channel - Backbone - 5 (FC-BB-5), section 7.6 and table 47" DEFVAL { '0EFC00'h } ::= { hh3cFCoECfgEntry 1 } hh3cFCoECfgDynamicVfcCreation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is set to 'true' to enable, or 'false' to disable, the dynamic creation of VFC interfaces on this FCF. When set to 'true', VFC interfaces are dynamically created as and when a FIP-based FLOGI or ELP request is received." DEFVAL { false } ::= { hh3cFCoECfgEntry 2 } hh3cFCoECfgDefaultFCFPriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The FIP priority value advertised by the FCF to ENodes by default. hh3cFCoEStaticVfcFCFPriority configured for a VFC interface overrides this setting for the ENode associated with the VFC." DEFVAL { 128 } ::= { hh3cFCoECfgEntry 3 } hh3cFCoECfgDATov OBJECT-TYPE SYNTAX Unsigned32 (4..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The Discovery_Advertisement_Timeout value configured for the FCF. This is used as the timeout value in seconds by the FCF to send periodic Discovery Advertisements." DEFVAL { 8 } ::= { hh3cFCoECfgEntry 4 } hh3cFCoECfgAddressingMode OBJECT-TYPE SYNTAX INTEGER { fpma(1), spma(2), fpmaAndSpma(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Addressing mode(s) supported by the FCF. Implementations should fail SetRequests for unsupported modes." ::= { hh3cFCoECfgEntry 5 } hh3cFCoEVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cFCoEVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "In fabrics in which VLANs are deployed, this table facilitates configuration of VLAN and Virtual Fabric associations in an FCoE network. In such fabrics, FCoE forwarding for a fabric is over a VLAN in a (Layer-2) Ethernet network. That is, reachability between the ENode/remote-FCF and an FCF for a given fabric is determined by the reachability provided by the Ethernet network on the corresponding VLAN. An active entry in this table indicates which VLAN is used to transport FCoE traffic for a particular Virtual Fabric. If VLANs are not deployed or not enabled, entries in this table are ignored by the bridge. Some implementations may allow traffic from only one Virtual Fabric to be transported over a given VLAN. Such implementations should prevent multiple entries with the same VLAN-ID from being created in this table. Modifying existing VLAN-Virtual Fabric associations is not possible. The specific row must first be deleted and then a new one created." ::= { hh3cFCoEConfig 2 } hh3cFCoEVLANEntry OBJECT-TYPE SYNTAX Hh3cFCoEVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one entry in this table for each VLAN that is designated to transport FCoE traffic for a given Virtual Fabric." INDEX { fcmInstanceIndex, hh3cFCoEVLANIndex, hh3cFCoEFabricIndex } ::= { hh3cFCoEVLANTable 1 } Hh3cFCoEVLANEntry ::= SEQUENCE { hh3cFCoEVLANIndex VlanIndex, hh3cFCoEFabricIndex T11FabricIndex, hh3cFCoEVLANOperState INTEGER, hh3cFCoEVLANRowStatus RowStatus } hh3cFCoEVLANIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the VLAN-ID that the FCoE FCF function is being enabled for." ::= { hh3cFCoEVLANEntry 1 } hh3cFCoEFabricIndex OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the Fabric Index of the Virtual Fabric traffic which is to be transported over the VLAN identified by hh3cFCoEVLANIndex." ::= { hh3cFCoEVLANEntry 2 } hh3cFCoEVLANOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational state of this VLAN-Virtual Fabric association entry. The 'up' state is achieved when both the Virtual Fabric and VLAN are valid." ::= { hh3cFCoEVLANEntry 3 } hh3cFCoEVLANRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The RowStatus becomes active on successful creation of an entry." ::= { hh3cFCoEVLANEntry 4 } hh3cFCoEStaticVfcTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cFCoEStaticVfcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table facilitates the creation and deletion of static VFC interfaces. While VFCs can be dynamically created based on FIP FLOGI/ELP requests, operators may want to associate certain pre-configured policy for a particular ENode or a remote-FCF. In such cases static VFC creation becomes necessary. In addition to being creating, a static VFC also needs to be associated to an ENode or remote-FCF. The VFC binding provides such an association. The binding does not need to be specified when the row for a VFC is created, but may be specified later." ::= { hh3cFCoEConfig 3 } hh3cFCoEStaticVfcEntry OBJECT-TYPE SYNTAX Hh3cFCoEStaticVfcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one entry in this table for each statically created VFC Interface." INDEX { fcmInstanceIndex, hh3cFCoEStaticVfcIndex } ::= { hh3cFCoEStaticVfcTable 1 } Hh3cFCoEStaticVfcEntry ::= SEQUENCE { hh3cFCoEStaticVfcIndex Unsigned32, hh3cFCoEStaticVfcFCFPriority Unsigned32, hh3cFCoEStaticVfcBindType Hh3cFCoEVfcBindType, hh3cFCoEStaticVfcBindIfIndex InterfaceIndexOrZero, hh3cFCoEStaticVfcBindMACAddress MacAddress, hh3cFCoEStaticVfcIfIndex InterfaceIndex, hh3cFCoEStaticVfcCreationTime TimeStamp, hh3cFCoEStaticVfcFailureCause SnmpAdminString, hh3cFCoEStaticVfcRowStatus RowStatus } hh3cFCoEStaticVfcIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index uniquely identifies a static VFC entry in this table." ::= { hh3cFCoEStaticVfcEntry 1 } hh3cFCoEStaticVfcFCFPriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "If this VFC is for a VF_Port this object is used to configure FCF priority to be advertised to the ENode associated with the VFC." DEFVAL { 128 } ::= { hh3cFCoEStaticVfcEntry 2 } hh3cFCoEStaticVfcBindType OBJECT-TYPE SYNTAX Hh3cFCoEVfcBindType MAX-ACCESS read-create STATUS current DESCRIPTION "The mechanism to identify the ENode associated with this VFC if it is of type VF_Port or to identify the remote-FCF associated with this VFC if it is of type VE_Port." ::= { hh3cFCoEStaticVfcEntry 3 } hh3cFCoEStaticVfcBindIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicable only when the local FCF is directly connected to an ENode or remote-FCF over a specific Ethernet interface, in which case this object contains the ifIndex of said Ethernet interface. If the ENode or remote-FCF is not directly connected to the FCF, this value of this object is zero." ::= { hh3cFCoEStaticVfcEntry 4 } hh3cFCoEStaticVfcBindMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicable when the ENode or remote-FCF to which the local FCF is connected is identified by a MAC address. A FIP frame from an ENode or remote-FCF is associated with this VFC only if the source MAC address in the frame is the same as the value of this object." ::= { hh3cFCoEStaticVfcEntry 5 } hh3cFCoEStaticVfcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of this Virtual FC interface." ::= { hh3cFCoEStaticVfcEntry 6 } hh3cFCoEStaticVfcCreationTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of this entry's creation time." ::= { hh3cFCoEStaticVfcEntry 7 } hh3cFCoEStaticVfcFailureCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause of failure for the last bind operation. This object will be zero length if and only if the bind is successful." ::= { hh3cFCoEStaticVfcEntry 8 } hh3cFCoEStaticVfcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The RowStatus becomes active on successful creation of a VFC. The VFC does not need to be bound for the row to be active, but the VFC must be bound before becoming operational." ::= { hh3cFCoEStaticVfcEntry 9 } -- -- FIP Snooping related objects used to configure FIP Snooping -- on a (FIP-aware) Ethernet Bridge -- hh3cFCoEFIPSnoopingTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCoE provides increased flexibility, but with this flexibility new challenges arise in assuring highly robust Fabrics. The FCF does not have the complete control that a Fibre Channel switch has. Ethernet bridges commonly provide a feature called Access Control Lists (ACLs). Properly configured ACLs may emulate a point-to-point link by providing the traffic enforcement previously discussed. Furthermore, the FIP protocol has been designed to enable Ethernet bridges to efficiently monitor FIP frames passing through them. This data facilitates the automatic configuration of these ACLs. In addition, the automatic configuration is possible independent of any other ACLs that may be in use in the network for other applications. And FIP Snooping is to maintain these ACLs." ::= { hh3cFCoEConfig 4 } hh3cFCoEFIPSnoopingEntry OBJECT-TYPE SYNTAX Hh3cFCoEFIPSnoopingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one entry in this table for each VLAN that is designated to ensure that only valid FCoE traffic is allowed." INDEX { fcmInstanceIndex, hh3cFCoEFIPSnoopingVLANIndex } ::= { hh3cFCoEFIPSnoopingTable 1 } Hh3cFCoEFIPSnoopingEntry ::= SEQUENCE { hh3cFCoEFIPSnoopingVLANIndex VlanIndex, hh3cFCoEFIPSnoopingEnable TruthValue, hh3cFCoEFIPSnoopingFcmap OCTET STRING } hh3cFCoEFIPSnoopingVLANIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the VLAN-ID that the FIP Snooping function is being enabled for." ::= { hh3cFCoEFIPSnoopingEntry 1 } hh3cFCoEFIPSnoopingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable FIP Snooping on an Ethernet Bridge." DEFVAL { false } ::= { hh3cFCoEFIPSnoopingEntry 2 } hh3cFCoEFIPSnoopingFcmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the FC-MAP value associated with the FIP snooping Ethernet Bridge." DEFVAL { '0EFC00'h } ::= { hh3cFCoEFIPSnoopingEntry 3 } -- VLAN FCoE Configuration hh3cFCoEVlanCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cFCoEVlanCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains FCoE related configurations and information of VLANs. An entry in this table is created when the corresponding VLAN is created and FCoE is enabled for the VLAN, as well as deleted when the VLAN is deleted or FCoE is disabled for the VLAN. If the switch mode is not FCF-NPV mode, all the operations on any object in this table result in errors." ::= { hh3cFCoEConfig 5 } hh3cFCoEVlanCfgEntry OBJECT-TYPE SYNTAX Hh3cFCoEVlanCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry used for managing the FCoE related configurations of a VLAN." INDEX { hh3cFCoEVLANIndex } ::= { hh3cFCoEVlanCfgTable 1} Hh3cFCoEVlanCfgEntry ::= SEQUENCE { hh3cFCoEVlanCfgFcmap OCTET STRING, hh3cFCoEVlanCfgFCFPriority Unsigned32, hh3cFCoEVlanCfgDATov Unsigned32, hh3cFCoEVlanCfgRowStatus RowStatus } hh3cFCoEVlanCfgFcmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object configures the FC-MAP value used by the FCF in a VLAN when operating in FPMA mode. If this object is not configured, the default value is 0EFC00h." DEFVAL { '0EFC00'h } ::= { hh3cFCoEVlanCfgEntry 1 } hh3cFCoEVlanCfgFCFPriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The FIP priority value advertised by the FCF in a VLAN to ENodes by default. If this object is not configured, the default value is 128." DEFVAL { 128 } ::= { hh3cFCoEVlanCfgEntry 2 } hh3cFCoEVlanCfgDATov OBJECT-TYPE SYNTAX Unsigned32 (4..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The Discovery_Advertisement_Timeout value configured for the FCF in a VLAN. This is used as the timeout value in seconds by the FCF in a VLAN to send periodic Discovery Advertisements. If this object is not configured, the default value is 8." DEFVAL { 8 } ::= { hh3cFCoEVlanCfgEntry 3 } hh3cFCoEVlanCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Now only three states are supported: createAndGo, active, and destroy." ::= { hh3cFCoEVlanCfgEntry 4 } -- FIP Snooping FCF information hh3cFCoEFIPSnoopingFCFTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingFCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains the remote FCF information on device." ::= { hh3cFCoEConfig 6 } hh3cFCoEFIPSnoopingFCFEntry OBJECT-TYPE SYNTAX Hh3cFCoEFIPSnoopingFCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a FCF for a VLAN." INDEX { fcmInstanceIndex, hh3cFCoEFIPSnoopingFCFVLANIndex, hh3cFCoEFIPSnoopingFCFIfIndex, hh3cFCoEFIPSnoopingFCFMAC } ::= { hh3cFCoEFIPSnoopingFCFTable 1 } Hh3cFCoEFIPSnoopingFCFEntry ::= SEQUENCE { hh3cFCoEFIPSnoopingFCFVLANIndex VlanIndex, hh3cFCoEFIPSnoopingFCFIfIndex InterfaceIndex, hh3cFCoEFIPSnoopingFCFMAC MacAddress, hh3cFCoEFIPSnoopingFCFSwitchName Hh3cFcNameId, hh3cFCoEFIPSnoopingFCFFabricName Hh3cFcNameId, hh3cFCoEFIPSnoopingFCFENodeCount Unsigned32 } hh3cFCoEFIPSnoopingFCFVLANIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the VLAN-ID whose FIP Snooping function gets ready on the FCF." ::= { hh3cFCoEFIPSnoopingFCFEntry 1 } hh3cFCoEFIPSnoopingFCFIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index uniquely identifies an Ethernet interface that connects to the FCF." ::= { hh3cFCoEFIPSnoopingFCFEntry 2 } hh3cFCoEFIPSnoopingFCFMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the Ethernet interface on the FCF directly connected to the local device." ::= { hh3cFCoEFIPSnoopingFCFEntry 3 } hh3cFCoEFIPSnoopingFCFSwitchName OBJECT-TYPE SYNTAX Hh3cFcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The switch name of the FCF." ::= { hh3cFCoEFIPSnoopingFCFEntry 4 } hh3cFCoEFIPSnoopingFCFFabricName OBJECT-TYPE SYNTAX Hh3cFcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The fabric name of the FCF." ::= { hh3cFCoEFIPSnoopingFCFEntry 5 } hh3cFCoEFIPSnoopingFCFENodeCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ENodes that log in through this Ethernet port." ::= { hh3cFCoEFIPSnoopingFCFEntry 6 } -- FIP Snooping ENode information hh3cFCoEFIPSnoopingENodeTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingENodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains the ENode information on the local device." ::= { hh3cFCoEConfig 7 } hh3cFCoEFIPSnoopingENodeEntry OBJECT-TYPE SYNTAX Hh3cFCoEFIPSnoopingENodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about an ENode for a VLAN." INDEX { fcmInstanceIndex, hh3cFCoEFIPSnoopingENodeVLANIndex, hh3cFCoEFIPSnoopingENodeIfIndex, hh3cFCoEFIPSnoopingENodeMAC } ::= { hh3cFCoEFIPSnoopingENodeTable 1 } Hh3cFCoEFIPSnoopingENodeEntry ::= SEQUENCE { hh3cFCoEFIPSnoopingENodeVLANIndex VlanIndex, hh3cFCoEFIPSnoopingENodeIfIndex InterfaceIndex, hh3cFCoEFIPSnoopingENodeMAC MacAddress, hh3cFCoEFIPSnoopingENodeName Hh3cFcNameId } hh3cFCoEFIPSnoopingENodeVLANIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the VLAN-ID whose FIP Snooping function gets ready on the ENode." ::= { hh3cFCoEFIPSnoopingENodeEntry 1 } hh3cFCoEFIPSnoopingENodeIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index uniquely identifies an Ethernet interface that connects to the ENode." ::= { hh3cFCoEFIPSnoopingENodeEntry 2 } hh3cFCoEFIPSnoopingENodeMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the ENode." ::= { hh3cFCoEFIPSnoopingENodeEntry 3 } hh3cFCoEFIPSnoopingENodeName OBJECT-TYPE SYNTAX Hh3cFcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The node name of the ENode." ::= { hh3cFCoEFIPSnoopingENodeEntry 4 } -- FIP Snooping VN information hh3cFCoEFIPSnoopingVNTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingVNEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains the virtual N_Port information on the local device." ::= { hh3cFCoEConfig 8 } hh3cFCoEFIPSnoopingVNEntry OBJECT-TYPE SYNTAX Hh3cFCoEFIPSnoopingVNEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a virtual N_Port." INDEX { fcmInstanceIndex, hh3cFCoEFIPSnoopingVNVLANIndex, hh3cFCoEFIPSnoopingVNENodeIfIndex, hh3cFCoEFIPSnoopingVNENodeMAC, hh3cFCoEFIPSnoopingVNFCFMAC, hh3cFCoEFIPSnoopingVNMAC } ::= { hh3cFCoEFIPSnoopingVNTable 1 } Hh3cFCoEFIPSnoopingVNEntry ::= SEQUENCE { hh3cFCoEFIPSnoopingVNVLANIndex VlanIndex, hh3cFCoEFIPSnoopingVNENodeIfIndex InterfaceIndex, hh3cFCoEFIPSnoopingVNENodeMAC MacAddress, hh3cFCoEFIPSnoopingVNFCFMAC MacAddress, hh3cFCoEFIPSnoopingVNMAC MacAddress, hh3cFCoEFIPSnoopingVNName Hh3cFcNameId, hh3cFCoEFIPSnoopingVNFCFIfIndex InterfaceIndex } hh3cFCoEFIPSnoopingVNVLANIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the VLAN-ID through which a virtual N_Port logs in to the FCF." ::= { hh3cFCoEFIPSnoopingVNEntry 1 } hh3cFCoEFIPSnoopingVNENodeIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index uniquely identifies an Ethernet interface that connects to the ENode." ::= { hh3cFCoEFIPSnoopingVNEntry 2 } hh3cFCoEFIPSnoopingVNENodeMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the ENode." ::= { hh3cFCoEFIPSnoopingVNEntry 3 } hh3cFCoEFIPSnoopingVNFCFMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the FCF." ::= { hh3cFCoEFIPSnoopingVNEntry 4 } hh3cFCoEFIPSnoopingVNMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the virtual N_Port." ::= { hh3cFCoEFIPSnoopingVNEntry 5 } hh3cFCoEFIPSnoopingVNName OBJECT-TYPE SYNTAX Hh3cFcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The port name of the virtual N_Port." ::= { hh3cFCoEFIPSnoopingVNEntry 6 } hh3cFCoEFIPSnoopingVNFCFIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This index uniquely identifies an Ethernet interface that connects to the FCF." ::= { hh3cFCoEFIPSnoopingVNEntry 7 } -- FIP Snooping Config type of Ethernet hh3cFCoEFIPSnoopingIfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table is used to configure FIP Snooping working mode of the Ethernet interface on the localdevice." ::= { hh3cFCoEConfig 9 } hh3cFCoEFIPSnoopingIfCfgEntry OBJECT-TYPE SYNTAX Hh3cFCoEFIPSnoopingIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about FIP Snooping working mode of the Ethernet interface." INDEX { fcmInstanceIndex, hh3cFCoEFIPSnoopingIfCfgIfIndex } ::= { hh3cFCoEFIPSnoopingIfCfgTable 1 } Hh3cFCoEFIPSnoopingIfCfgEntry ::= SEQUENCE { hh3cFCoEFIPSnoopingIfCfgIfIndex InterfaceIndex, hh3cFCoEFIPSnoopingIfCfgPortType INTEGER } hh3cFCoEFIPSnoopingIfCfgIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index uniquely identifies an Ethernet interface." ::= { hh3cFCoEFIPSnoopingIfCfgEntry 1 } hh3cFCoEFIPSnoopingIfCfgPortType OBJECT-TYPE SYNTAX INTEGER { fcf(1), enode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The FIP Snooping working mode of an Ethernet interface on the local device. The FCF mode means that the Ethernet interface must connect to an FCF. The ENode mode means that the Ethernet interface must connect to an ENode." ::= { hh3cFCoEFIPSnoopingIfCfgEntry 2 } END