-- ============================================================================ -- Copyright (C) 2003 New H3C Tech. Co., Ltd. All rights reserved. -- -- Description: Internetwork Packet Exchange MIB -- Reference: -- Version: V1.0 -- History: -- V1.0 created by wanglu. -- ============================================================================ HH3C-IPX-MIB DEFINITIONS ::= BEGIN -- ================================================================== -- -- Variables and types be imported -- -- ================================================================== IMPORTS Integer32,MODULE-IDENTITY,OBJECT-TYPE, TimeTicks,Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC hh3cCommon FROM HH3C-OID-MIB; -- ================================================================== -- -- module identity part -- -- ================================================================== hh3cIpx MODULE-IDENTITY LAST-UPDATED "200412241036Z" ORGANIZATION "New H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085 " DESCRIPTION "This MIB defines management information used on products which support ipx protocol. It includes 4 parts: 1.ipx interface configuration group - This group contains configurable management information and statistic information on each interface. 2.rip group - Rip means route information protocol. This group contains configurable management information and route status and route statistic information. 3.sap group - Sap means service access group. This group contains all service information. 4.ipx statistics group - This group includes ipx statistic information on all interfaces." ::= { hh3cCommon 34 } -- ============================================================= -- Textual Conventions -- ============================================================= EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } -- ================================================================== -- -- =====================object definition begin====================== -- -- ================================================================== hh3cIpxConfig OBJECT IDENTIFIER ::= { hh3cIpx 1 } hh3cIpxRip OBJECT IDENTIFIER ::= { hh3cIpx 2 } hh3cIpxSap OBJECT IDENTIFIER ::= { hh3cIpx 3 } hh3cIpxStat OBJECT IDENTIFIER ::= { hh3cIpx 4 } -- hh3cIpxIfConfig contains configurable management information -- on each interface. hh3cIpxStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable ipx globally." DEFVAL { disabled } ::= { hh3cIpxConfig 1 } hh3cIpxIfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIpxIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of configurable management information on each interface." ::= { hh3cIpxConfig 2 } hh3cIpxIfConfigEntry OBJECT-TYPE SYNTAX Hh3cIpxIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing management information about a single interface." INDEX { hh3cIpxIfIndex } ::= { hh3cIpxIfConfigTable 1 } Hh3cIpxIfConfigEntry ::= SEQUENCE { hh3cIpxIfIndex Integer32, hh3cIpxIfNetId OCTET STRING, hh3cIpxIfNodeId OCTET STRING, hh3cIpxIfSplitHorizon EnabledStatus, hh3cIPxIfTick Integer32, hh3cIpxIfUpdateChangeOnly EnabledStatus, hh3cIpxIfRipMtu Integer32, hh3cIpxIfEncapsuleType INTEGER, hh3cIpxIfNetbiosPropagation EnabledStatus, hh3cIpxIfSapStatus EnabledStatus, hh3cIpxIfSapMtu Integer32, hh3cIpxIfGnsReply EnabledStatus, hh3cIpxIfRowStatus RowStatus } -- node definition hh3cIpxIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This variable uniquely identifies the interface to which the configurations are applied." REFERENCE "ifIndex" ::= { hh3cIpxIfConfigEntry 1 } hh3cIpxIfNetId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The network number of the IPX address of this interface." ::= { hh3cIpxIfConfigEntry 2 } hh3cIpxIfNodeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The node number of the IPX address of this interface." ::= { hh3cIpxIfConfigEntry 3 } hh3cIpxIfSplitHorizon OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to set the split horizon status. Its default value is 'enabled'. In this case, the interface which receives a message can't send this message from the same interface. This function can avoid route loop. But it is unused for point to point link. If it is set to 'disabled', split horizon is disable." DEFVAL { enabled } ::= { hh3cIpxIfConfigEntry 4 } hh3cIPxIfTick OBJECT-TYPE SYNTAX Integer32(1..30000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set this interface's delay time. It is counted by ticks which is 1/18 second. By default, the ethernet interface's delay time is 1 tick, asynchronous serial interface's delay time is 30 ticks, WAN interface's delay time is 6 ticks." ::= { hh3cIpxIfConfigEntry 5 } hh3cIpxIfUpdateChangeOnly OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "When this variable is set to 'enabled', updating change is on. And sap and rip will send updating packets periodically to avoid broadcast storm. Whereas updating change is off." DEFVAL { disabled } ::= { hh3cIpxIfConfigEntry 6 } hh3cIpxIfRipMtu OBJECT-TYPE SYNTAX Integer32(432..1500) MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to define the max length of RIP updating packets." DEFVAL { 432 } ::= { hh3cIpxIfConfigEntry 7 } hh3cIpxIfEncapsuleType OBJECT-TYPE SYNTAX INTEGER { dot2(1), dot3(2), ethernet-2(3), snap(4), unkown(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to define the encapsulating form of IPX packets. 'dot2' indicates the form is 802.2, while 'dot3' means 802.3. And 'snap' indicates the form is ethernet-snap. It takes effect only on ethernet interface, and the default value is 'dot3', while 'unkown' for other types of port." DEFVAL { dot3 } ::= { hh3cIpxIfConfigEntry 8 } hh3cIpxIfNetbiosPropagation OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node is used to configure whether the current interface can forward broadcasting packets which IPX type is 20 used for NetBIOS." DEFVAL { disabled } ::= { hh3cIpxIfConfigEntry 9 } hh3cIpxIfSapStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of sap on the current interface. It is enabled when ipx is enabled on this interface." DEFVAL { enabled } ::= { hh3cIpxIfConfigEntry 10 } hh3cIpxIfSapMtu OBJECT-TYPE SYNTAX Integer32(480..1500) MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to define the max length of SAP refreshing packets." DEFVAL { 480 } ::= { hh3cIpxIfConfigEntry 11 } hh3cIpxIfGnsReply OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable or disable the current interface to response the IPX GNS request." DEFVAL { enabled } ::= { hh3cIpxIfConfigEntry 12 } hh3cIpxIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted." ::= { hh3cIpxIfConfigEntry 13 } -- rip group -- basic configurable management information hh3cIpxRouteMultiplier OBJECT-TYPE SYNTAX Integer32(1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This node is used to calculate Rip aging time of route information. The absolute aging time = (hh3cIpxRouteMultiplier * hh3cIpxRouteUpdateTimer)." DEFVAL { 3 } ::= { hh3cIpxRip 1 } hh3cIpxRouteUpdateTimer OBJECT-TYPE SYNTAX Integer32(10..60000) MAX-ACCESS read-write STATUS current DESCRIPTION "This node is used to set rip updating time which is based on seconds" DEFVAL { 60 } ::= { hh3cIpxRip 2 } hh3cIpxRouteImpRouteStatic OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines whether static route can be imported." DEFVAL { disabled } ::= { hh3cIpxRip 3 } hh3cIpxRouteLoadBalancePaths OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the max equivalent paths to the same destination. If the newly defined value is smaller than the current value, the routes out of the new value will be set inactive." DEFVAL { 1 } ::= { hh3cIpxRip 4 } hh3cIpxRouteMaxResPaths OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the max dynamic routes to the same destination. If the newly defined value is smaller than the current value, the routes will not be deleted until they age out or are deleted manually." DEFVAL { 4 } ::= { hh3cIpxRip 5 } -- hh3cIpxRouteTable contains all ipx route information of -- this system. There are all kinds of information in this table -- including direct, rip, inactive, active, etc. hh3cIpxRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIpxRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all dynamic and direct ipx route information of this system. The information of this table is read only." ::= { hh3cIpxRip 6 } hh3cIpxRouteEntry OBJECT-TYPE SYNTAX Hh3cIpxRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry includes a dynamic or direct route." INDEX { hh3cIpxRouteIndex } ::= { hh3cIpxRouteTable 1 } Hh3cIpxRouteEntry ::= SEQUENCE { hh3cIpxRouteIndex Integer32, hh3cIpxRouteDestNetId OCTET STRING, hh3cIpxRouteNextHop OCTET STRING, hh3cIpxRoutePro INTEGER, hh3cIpxRoutePre Integer32, hh3cIpxRouteTicks Integer32, hh3cIpxRouteHops Integer32, hh3cIpxRouteTime Integer32, hh3cIpxRouteOutInterface OCTET STRING } hh3cIpxRouteIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies a route." ::= { hh3cIpxRouteEntry 1 } hh3cIpxRouteDestNetId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination network number of this route information, and its value ranges from 1 to 0xfffffffe." ::= { hh3cIpxRouteEntry 2 } hh3cIpxRouteNextHop OBJECT-TYPE SYNTAX OCTET STRING (SIZE(10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The next hop of this route." ::= { hh3cIpxRouteEntry 3 } hh3cIpxRoutePro OBJECT-TYPE SYNTAX INTEGER{ direct(1), rip(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol type of this route information." ::= { hh3cIpxRouteEntry 4 } hh3cIpxRoutePre OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The preference of this route information. The direct route's preference is 0, and it can't be modified. Dynamic route's default preference is 100." ::= { hh3cIpxRouteEntry 5 } hh3cIpxRouteTicks OBJECT-TYPE SYNTAX Integer32(1..65534) MAX-ACCESS read-only STATUS current DESCRIPTION "The time, in ticks, that the packet takes to reach the destination." ::= { hh3cIpxRouteEntry 6 } hh3cIpxRouteHops OBJECT-TYPE SYNTAX Integer32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the number of hops that the packet must be passed through to reach the destination." ::= { hh3cIpxRouteEntry 7 } hh3cIpxRouteTime OBJECT-TYPE SYNTAX Integer32(0..60000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The aging time of this route information. The aging time of static and interface route information is 0." ::= { hh3cIpxRouteEntry 8 } hh3cIpxRouteOutInterface OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "The out interface of this route information." ::= { hh3cIpxRouteEntry 9 } -- hh3cIpxStaticRouteTable contains all static route -- information hh3cIpxStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIpxStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all static ipx route information of this system." ::= { hh3cIpxRip 7 } hh3cIpxStaticRouteEntry OBJECT-TYPE SYNTAX Hh3cIpxStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry includes one static route information." INDEX { hh3cIpxStaticRouteDestNetId, hh3cIpxStaticRouteNextHop } ::= { hh3cIpxStaticRouteTable 1 } Hh3cIpxStaticRouteEntry ::= SEQUENCE { hh3cIpxStaticRouteDestNetId OCTET STRING, hh3cIpxStaticRouteNextHop OCTET STRING, hh3cIpxStaticRoutePre Integer32, hh3cIpxStaticRouteOutIf OCTET STRING, hh3cIpxStaticRouteTicks Integer32, hh3cIpxStaticRouteHops Integer32, hh3cIpxStaticRouteStatus INTEGER, hh3cIpxStaticRouteRowStatus RowStatus } hh3cIpxStaticRouteDestNetId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of Static Route Table. This object and hh3cIpxStaticRouteNextHop uniquely identify a static route. The destination network number of this static route information,and its value ranges from 1 to 0xfffffffe. Note that the broadcast network number is 0xffffffff and is not allowed in IPX. The network number of 0xfffffffe would be considered to be the network number of default route." ::= { hh3cIpxStaticRouteEntry 1 } hh3cIpxStaticRouteNextHop OBJECT-TYPE SYNTAX OCTET STRING (SIZE(10)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sub-index of Static Route Table. The next hop of this static route information." ::= { hh3cIpxStaticRouteEntry 2 } hh3cIpxStaticRoutePre OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The preference of this route information. Static route's preference is 60, and it can be configured." DEFVAL { 60 } ::= { hh3cIpxStaticRouteEntry 3 } hh3cIpxStaticRouteOutIf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..30)) MAX-ACCESS read-create STATUS current DESCRIPTION "The out interface of this route. This interface can be serial or pos interface. " ::= { hh3cIpxStaticRouteEntry 4 } hh3cIpxStaticRouteTicks OBJECT-TYPE SYNTAX Integer32(1..65534) MAX-ACCESS read-create STATUS current DESCRIPTION "The time, in ticks that the packet takes to reach the destination with the static route." ::= { hh3cIpxStaticRouteEntry 5 } hh3cIpxStaticRouteHops OBJECT-TYPE SYNTAX Integer32(1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates how many hops are needed to arrive at the destination network." DEFVAL { 1 } ::= { hh3cIpxStaticRouteEntry 6 } hh3cIpxStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER{ active(1), inactive(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this static route." ::= { hh3cIpxStaticRouteEntry 7 } hh3cIpxStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted." ::= { hh3cIpxStaticRouteEntry 8 } -- hh3cIpxRouteStatTable includes statistic route information hh3cIpxRouteStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIpxRouteStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table includes all statistic route information." ::= { hh3cIpxRip 8 } hh3cIpxRouteStatEntry OBJECT-TYPE SYNTAX Hh3cIpxRouteStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry records a statistic information of route." INDEX { hh3cIpxRouteStatPro } ::= { hh3cIpxRouteStatTable 1 } Hh3cIpxRouteStatEntry ::= SEQUENCE { hh3cIpxRouteStatPro INTEGER, hh3cIpxRouteStatRoutes Counter32, hh3cIpxRouteStatActives Counter32, hh3cIpxRouteStatAddeds Counter32, hh3cIpxRouteStatDeleteds Counter32, hh3cIpxRouteStatFreeds Counter32 } hh3cIpxRouteStatPro OBJECT-TYPE SYNTAX INTEGER{ direct(1), static(2), rip(3), default(4), total(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol type of the route information. The value of 'total' is the total amount of all kinds of IPX routes." ::= { hh3cIpxRouteStatEntry 1 } hh3cIpxRouteStatRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route amount of the corresponding protocol type." ::= { hh3cIpxRouteStatEntry 2 } hh3cIpxRouteStatActives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The active route amount of the corresponding protocol type." ::= { hh3cIpxRouteStatEntry 3 } hh3cIpxRouteStatAddeds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The added route amount of the corresponding protocol type." ::= { hh3cIpxRouteStatEntry 4 } hh3cIpxRouteStatDeleteds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The deleted but not freed route amount of the corresponding protocol type." ::= { hh3cIpxRouteStatEntry 5 } hh3cIpxRouteStatFreeds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The freed route amount of the corresponding protocol type." ::= { hh3cIpxRouteStatEntry 6 } -- sap group -- basic configurable management information hh3cIpxSapMultiplier OBJECT-TYPE SYNTAX Integer32(1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This node is used to calculate aging time of service information. The absolute aging time = (hh3cIpxSapMultiplier * hh3cIpxSapUpdateTimer)." DEFVAL { 3 } ::= { hh3cIpxSap 1 } hh3cIpxSapUpdateTimer OBJECT-TYPE SYNTAX Integer32(10..60000) MAX-ACCESS read-write STATUS current DESCRIPTION "This node is used to set service packet updating time which is based on seconds." DEFVAL { 60 } ::= { hh3cIpxSap 2 } hh3cIpxSapGnsLoadBalance OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set whether the system will reply to the GNS request with the Round-Robin way. By default, the system will response to the GNS request with the servers known to the device in turn, preventing from the nearest server's over loading. With value of disabled, in this way, the system will response to the request with the nearest server(who has smallest hop in system's service information table)." DEFVAL { enabled } ::= { hh3cIpxSap 3 } hh3cIpxSapMaxResServers OBJECT-TYPE SYNTAX Integer32(1..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure maximum number of servers of a type. If the newly defined value is smaller than the previous value, the information out of the value will not be deleted. If the queue reaches to the maximum number, no new information can be added." DEFVAL { 2048 } ::= { hh3cIpxSap 4 } -- hh3cIpxServiceTable contains the service information hh3cIpxServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIpxServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table inlcudes all dynamic service information. The dynamic service information can be read only." ::= { hh3cIpxSap 5 } hh3cIpxServiceEntry OBJECT-TYPE SYNTAX Hh3cIpxServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry records one service" INDEX { hh3cIpxServiceIndex } ::= { hh3cIpxServiceTable 1 } Hh3cIpxServiceEntry ::= SEQUENCE{ hh3cIpxServiceIndex Integer32, hh3cIpxServiceName OCTET STRING, hh3cIpxServiceType OCTET STRING, hh3cIpxServiceNetId OCTET STRING, hh3cIpxServiceNodeId OCTET STRING, hh3cIpxServiceSocketNo OCTET STRING, hh3cIpxServicePreference Integer32, hh3cIpxServiceHops Integer32, hh3cIpxServiceRecvIf OCTET STRING } -- node definition hh3cIpxServiceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies a service information." ::= { hh3cIpxServiceEntry 1 } hh3cIpxServiceName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..47)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the service." ::= { hh3cIpxServiceEntry 2 } hh3cIpxServiceType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service type." ::= { hh3cIpxServiceEntry 3 } hh3cIpxServiceNetId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPX network number portion of the IPX address of the service." ::= { hh3cIpxServiceEntry 4 } hh3cIpxServiceNodeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPX node number portion of the IPX address of the service." ::= { hh3cIpxServiceEntry 5 } hh3cIpxServiceSocketNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The socket portion of the IPX address of the service" ::= { hh3cIpxServiceEntry 6 } hh3cIpxServicePreference OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The service preference of the service" ::= { hh3cIpxServiceEntry 7 } hh3cIpxServiceHops OBJECT-TYPE SYNTAX Integer32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The hops from the device to the server." ::= { hh3cIpxServiceEntry 8 } hh3cIpxServiceRecvIf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface from which the service is receieved" ::= { hh3cIpxServiceEntry 9 } -- hh3cIpxStaticServiceTable This table contains all static service information hh3cIpxStaticServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIpxStaticServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table inlcudes all static service information. This table supports to creation and deletione of a static service, but not supports to modification" ::= { hh3cIpxSap 6 } hh3cIpxStaticServiceEntry OBJECT-TYPE SYNTAX Hh3cIpxStaticServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry records one service" INDEX { hh3cIpxStaticServiceType, hh3cIpxStaticServiceName, hh3cIpxStaticServiceNetId } ::= { hh3cIpxStaticServiceTable 1 } Hh3cIpxStaticServiceEntry ::= SEQUENCE{ hh3cIpxStaticServiceType OCTET STRING, hh3cIpxStaticServiceName OCTET STRING, hh3cIpxStaticServiceNetId OCTET STRING, hh3cIpxStaticServiceNodeId OCTET STRING, hh3cIpxStatciServiceSocketNo OCTET STRING, hh3cIpxStaticServicePreference Integer32, hh3cIpxStaticServiceHops Integer32, hh3cIpxStaticServiceStatus INTEGER, hh3cIpxStaticServiceRowStatus RowStatus } -- node definition hh3cIpxStaticServiceType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of static service table." ::= { hh3cIpxStaticServiceEntry 1 } hh3cIpxStaticServiceName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..47)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sub-index of static service table. The name of the service." ::= { hh3cIpxStaticServiceEntry 2 } hh3cIpxStaticServiceNetId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sub-index of static service table. The IPX network number portion of the IPX address of the service." ::= { hh3cIpxStaticServiceEntry 3 } hh3cIpxStaticServiceNodeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IPX node number portion of the IPX address of the service." ::= { hh3cIpxStaticServiceEntry 4 } hh3cIpxStatciServiceSocketNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-create STATUS current DESCRIPTION "The socket portion of the IPX address of the service." ::= { hh3cIpxStaticServiceEntry 5 } hh3cIpxStaticServicePreference OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The service preference of the server." DEFVAL { 60 } ::= { hh3cIpxStaticServiceEntry 6 } hh3cIpxStaticServiceHops OBJECT-TYPE SYNTAX Integer32(1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "The hops from the device to the server." ::= { hh3cIpxStaticServiceEntry 7 } hh3cIpxStaticServiceStatus OBJECT-TYPE SYNTAX INTEGER{ active(1), inactive(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the service that you created. The value of this object is determined by system." ::= { hh3cIpxStaticServiceEntry 8 } hh3cIpxStaticServiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted." ::= { hh3cIpxStaticServiceEntry 9 } -- ipx statistics group -- statistic information about packets Input/Output hh3cIpxStatGlobal OBJECT IDENTIFIER ::= { hh3cIpxStat 1 } hh3cIpxStatInterface OBJECT IDENTIFIER ::= { hh3cIpxStat 2 } -- received hh3cIpxStatTotalReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received." ::= { hh3cIpxStatGlobal 1 } hh3cIpxStatPitchs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets filled by device when forwarding or delivering up to upper protocol." ::= { hh3cIpxStatGlobal 2 } hh3cIpxStatLenErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets discarded due to length error." ::= { hh3cIpxStatGlobal 3 } hh3cIpxStatFormatErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets discarded due to format error." ::= { hh3cIpxStatGlobal 4 } hh3cIpxStatBadHops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets which's value of field Hops is greater than 16." ::= { hh3cIpxStatGlobal 5 } hh3cIpxStatHopsDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets of which hops portion is equal to 16." ::= { hh3cIpxStatGlobal 6 } hh3cIpxStatOtherErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets discarded due to other error." ::= { hh3cIpxStatGlobal 7 } hh3cIpxStatLocalDests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets which destination is the local device. Note that this would include the IPX NetBIOS propagation packets and those broadcast packets just to the network on which local device resides." ::= { hh3cIpxStatGlobal 8 } hh3cIpxStatCantDeals OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets with which can't be dealt. One possible reason for discarding such a packet would be receiving a packet of an unknown or unsupported protocol." ::= { hh3cIpxStatGlobal 9 } -- Sent hh3cIpxStatForwards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets to be forwarded in the case that the entity was not their final destination." ::= { hh3cIpxStatGlobal 10 } hh3cIpxStatGenerates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sent packets that the device generated itself." ::= { hh3cIpxStatGlobal 11 } hh3cIpxStatNoRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets discarded due to no route to the destination was found in routing table." ::= { hh3cIpxStatGlobal 12 } hh3cIpxStatOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets to be discarded when sending out. Note that this counter would not include the packet(s) discarded due to no route." ::= { hh3cIpxStatGlobal 13 } -- Rip hh3cIpxStatRipSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP packets sent." ::= { hh3cIpxStatGlobal 14 } hh3cIpxStatRipReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP packets received." ::= { hh3cIpxStatGlobal 15 } hh3cIpxStaRipRspSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP response packets sent. " ::= { hh3cIpxStatGlobal 16 } hh3cIpxStaRipRspReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP response packets received." ::= { hh3cIpxStatGlobal 17 } hh3cIpxStatRipReqReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP request packets received." ::= { hh3cIpxStatGlobal 18 } hh3cIpxStatRipReqDeals OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP request packets dealt with." ::= { hh3cIpxStatGlobal 19 } hh3cIpxStatRipReqSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP request packets sent." ::= { hh3cIpxStatGlobal 20} hh3cIpxStatRipPeriUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of periodic update RIP packets sent." ::= { hh3cIpxStatGlobal 21 } -- Sap hh3cIpxStatSapGenReqReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP general request packets received." ::= { hh3cIpxStatGlobal 22 } hh3cIpxStatSapSpecReqReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP specific request packets received." ::= { hh3cIpxStatGlobal 23 } hh3cIpxStatSapGnsReqReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP GNS request packets received." ::= { hh3cIpxStatGlobal 24 } hh3cIpxStatSapGenRspSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP general response packets sent." ::= { hh3cIpxStatGlobal 25 } hh3cIpxStatSapSpecRspSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP specific response packets sent." ::= { hh3cIpxStatGlobal 26 } hh3cIpxStatSapGnsRspSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP GNS response packets sent." ::= { hh3cIpxStatGlobal 27 } hh3cIpxStatSapPeriUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP periodic update packets sent." ::= { hh3cIpxStatGlobal 28 } hh3cIpxStatSapInPktErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP error packets received." ::= { hh3cIpxStatGlobal 29 } -- hh3cIpxIfStatTable includes all statistic information -- on each interface. hh3cIpxIfStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIpxIfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of the statistic information on each interface." ::= { hh3cIpxStatInterface 1 } hh3cIpxIfStatEntry OBJECT-TYPE SYNTAX Hh3cIpxIfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the statistic table." INDEX { hh3cIpxIfStatIndex } ::= { hh3cIpxIfStatTable 1 } Hh3cIpxIfStatEntry ::= SEQUENCE{ hh3cIpxIfStatIndex Integer32, hh3cIpxIfStatNetId OCTET STRING, hh3cIpxIfStatNodeId OCTET STRING, --ipx hh3cIpxIfStatIpxReceives Counter32, hh3cIpxIfStatIpxSends Counter32, hh3cIpxIfStatIpxRecvBytes Counter32, hh3cIpxIfStatIpxSendBytes Counter32, -- Rip hh3cIpxIfStatRipReceives Counter32, hh3cIpxIfStatRipSends Counter32, hh3cIpxIfStatRipDiscards Counter32, hh3cIpxIfStatRipSpecReqReceives Counter32, hh3cIpxIfStatRipSpecRspSends Counter32, hh3cIpxIfStatRipGenReqReceives Counter32, hh3cIpxIfStatRipGenRspSends Counter32, -- Sap hh3cIpxIfStatSapReceives Counter32, hh3cIpxIfStatSapSends Counter32, hh3cIpxIfStatSapDiscards Counter32, hh3cIpxIfStatSapGnsReqReceives Counter32, hh3cIpxIfStatSapGnsRspSends Counter32 } hh3cIpxIfStatIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the table's entry. According to the interface's index." REFERENCE "ifIndex" ::= { hh3cIpxIfStatEntry 1 } hh3cIpxIfStatNetId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The network number of the IPX address of this interface." ::= { hh3cIpxIfStatEntry 2 } hh3cIpxIfStatNodeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The node number of the IPX address of this interface." ::= { hh3cIpxIfStatEntry 3 } -- IPX hh3cIpxIfStatIpxReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received on the interface." ::= { hh3cIpxIfStatEntry 4 } hh3cIpxIfStatIpxSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets sent on the interface." ::= { hh3cIpxIfStatEntry 5 } hh3cIpxIfStatIpxRecvBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received on the interface." ::= { hh3cIpxIfStatEntry 6 } hh3cIpxIfStatIpxSendBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes sent on the interface." ::= { hh3cIpxIfStatEntry 7 } -- Rip hh3cIpxIfStatRipReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP packets received on the interface." ::= { hh3cIpxIfStatEntry 8 } hh3cIpxIfStatRipSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP packets sent on the interface." ::= { hh3cIpxIfStatEntry 9 } hh3cIpxIfStatRipDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP packets discarded on the interface." ::= { hh3cIpxIfStatEntry 10 } hh3cIpxIfStatRipSpecReqReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP specific request packets received on the interface." ::= { hh3cIpxIfStatEntry 11 } hh3cIpxIfStatRipSpecRspSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP specific response packets sent on the interface." ::= { hh3cIpxIfStatEntry 12 } hh3cIpxIfStatRipGenReqReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP general request packets received on the interface." ::= { hh3cIpxIfStatEntry 13 } hh3cIpxIfStatRipGenRspSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIP general response packets sent on the interface." ::= { hh3cIpxIfStatEntry 14 } -- Sap hh3cIpxIfStatSapReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP packets received on the interface." ::= { hh3cIpxIfStatEntry 15 } hh3cIpxIfStatSapSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP packets sent on the interface." ::= { hh3cIpxIfStatEntry 16 } hh3cIpxIfStatSapDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP packets discarded on the interface." ::= { hh3cIpxIfStatEntry 17 } hh3cIpxIfStatSapGnsReqReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP GNS response packets received on the interface." ::= { hh3cIpxIfStatEntry 18 } hh3cIpxIfStatSapGnsRspSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of SAP GNS response packets sent on the interface." ::= { hh3cIpxIfStatEntry 19 } END