-- ============================================================================ -- Copyright (c) 2004-2013 New H3C Tech. Co., Ltd. All rights reserved. -- -- Description: The purpose of this MIB file is to provide the definition of -- the MAC Information general configuration. -- Reference: -- Version: V1.2 -- History: -- V1.0 2007-12-28 -- Initial version, created by gejianzhuang -- V1.1 2009-08-13 -- Add 'hh3cMACInformationTrapObjectsExt' by gejianzhuang -- V1.2 2013-05-02 -- Add 'hh3cMACInformationMovedTrap' by yangjie -- ============================================================================ HH3C-MAC-INFORMATION-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cCommon FROM HH3C-OID-MIB Unsigned32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC ifIndex FROM IF-MIB; -- Node definitions hh3cMACInformation MODULE-IDENTITY LAST-UPDATED "200712281912Z" -- DEC 28, 2007 at 19:12 GMT ORGANIZATION "New H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085" DESCRIPTION "This MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in remote monitoring device." REVISION "200712281912Z" DESCRIPTION "The initial version of this MIB file." ::= { hh3cCommon 87 } Hh3cMACInfoWorkMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The working mode of the MAC Information feature." SYNTAX INTEGER { trap(1), syslog(2) } hh3cMACInformationObjects OBJECT IDENTIFIER ::= { hh3cMACInformation 1 } hh3cMACInformationMibGlobal OBJECT IDENTIFIER ::= { hh3cMACInformationObjects 1 } hh3cMACInformationMIBTableTroop OBJECT IDENTIFIER ::= { hh3cMACInformationObjects 2 } hh3cMACInformationMibTrap OBJECT IDENTIFIER ::= { hh3cMACInformationObjects 3 } hh3cMACInformationMibTrapExt OBJECT IDENTIFIER ::= { hh3cMACInformationObjects 4 } hh3cMACInformationEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value is a global setting. The feature will not work until the value is set to enabled(1). If the value is set to disabled(2), the feature will stop working even there are interfaces that have been enabled the feature." DEFVAL { disabled } ::= { hh3cMACInformationMibGlobal 1 } hh3cMACInformationcSendInterval OBJECT-TYPE SYNTAX Unsigned32(1..20000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum interval that the device generate syslogs or traps. The unit is second." DEFVAL { 1 } ::= { hh3cMACInformationMibGlobal 2 } hh3cMACInformationLearntMACNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MAC addresses that learnt by the device since the hh3cMACInformationEnabled is set to enabled(1) and hh3cMACLearntEnable is set to enabled(1) at least on one interface. If the hh3cMACInformationEnabled is set to disabled(2), the object will always return 0." ::= { hh3cMACInformationMibGlobal 3 } hh3cMACInformationRemovedMACNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MAC addresses that removed by the device since the hh3cMACInformationEnabled is set to enabled(1) and hh3cMACRemovedEnable is set to enabled(1) at least on one interface. If the hh3cMACInformationEnabled is set to disabled(2), the object will always return 0." ::= { hh3cMACInformationMibGlobal 4 } hh3cMACInformationTrapSendNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of traps that have been generated. This object is valid only when the hh3cMACInfomationWorkMode is set to trap(1). If the hh3cMACInfomationWorkMode is set to syslog(2), the object will always return 0." ::= { hh3cMACInformationMibGlobal 5 } hh3cMACInformationSyslogSendNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of syslogs that have been generated. This object is valid only when the hh3cMACInfomationWorkMode is set to syslog(2). If the hh3cMACInfomationWorkMode is set to trap(1), the object will always return 0." ::= { hh3cMACInformationMibGlobal 6 } hh3cMACInformationCacheLen OBJECT-TYPE SYNTAX Unsigned32(0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum queue lenth used to cache the changed MAC addresses information in the monitored device. If the value is set to 0, syslog or trap will generate as soon as there is a MAC address learnt or removed." DEFVAL { 50 } ::= { hh3cMACInformationMibGlobal 7 } hh3cMACInfomationWorkMode OBJECT-TYPE SYNTAX Hh3cMACInfoWorkMode MAX-ACCESS read-write STATUS current DESCRIPTION "The working mode of MAC Information feature. If the object is set to trap(1), the device will use trap mode to notify the MAC address information and all properties of trap interrelated is valid. If the object is set to syslog(2), the device will use syslog mode to notify the MAC address information and all properties of trap interrelated is invalid." ::= { hh3cMACInformationMibGlobal 8} --hh3cMACInfomationIfTable hh3cMACInfomationIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMACInfomationIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to enable or disable the MAC Information feature on interfaces." ::= { hh3cMACInformationMIBTableTroop 1 } hh3cMACInfomationIfEntry OBJECT-TYPE SYNTAX Hh3cMACInfomationIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cMACInfomationIfTable." INDEX { ifIndex } ::= { hh3cMACInfomationIfTable 1 } Hh3cMACInfomationIfEntry ::= SEQUENCE { hh3cMACLearntEnable INTEGER, hh3cMACRemovedEnable INTEGER } hh3cMACLearntEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the object is set to enabled(1) on interface, the device will cache the MAC address information that learnt on the interface." DEFVAL { disabled } ::= { hh3cMACInfomationIfEntry 1 } hh3cMACRemovedEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the object is set to enable(1) on interface, the device will cache the MAC address information that removed on the interface." DEFVAL { disabled } ::= { hh3cMACInfomationIfEntry 2 } -- hh3cMACNotificationTrap hh3cMACInformationTraps OBJECT IDENTIFIER ::= { hh3cMACInformationMibTrap 0 } hh3cMACInformationChangedTrap NOTIFICATION-TYPE OBJECTS { hh3cMACInfoTrapIndex, hh3cMACInfoTrapCount, hh3cMACInfoTrapMsg } STATUS current DESCRIPTION "When the cached number of MAC address information is reached the value specified by hh3cMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by hh3cMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when hh3cMACInfomationWorkMode is set to trap(1). When the hh3cMACInfomationWorkMode is set to syslog(2), No trap will be generated even hh3cMACInformationEnabled is set to enabled(1) and the feature is enabled on interface." ::= { hh3cMACInformationTraps 1 } hh3cMACInformationTrapObjects OBJECT IDENTIFIER ::= { hh3cMACInformationMibTrap 2 } hh3cMACInfoTrapIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The sequence number of trap information. When it reaches the maximum value, it should be set to 1." ::= { hh3cMACInformationTrapObjects 1 } hh3cMACInfoTrapCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell." ::= { hh3cMACInformationTrapObjects 2 } hh3cMACInfoTrapMsg OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..254)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '...'. Each cell consists of 12 octets in the format of ''. is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. is the MAC address and has size of 6 octets. is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - Reserved is the index of the interface where the MAC address is learnt or removed and has size of 2 octets." ::= { hh3cMACInformationTrapObjects 3 } -- hh3cMACNotificationTrapExt hh3cMACInformationTrapsExt OBJECT IDENTIFIER ::= { hh3cMACInformationMibTrapExt 0 } hh3cMACInformationChangedTrapExt NOTIFICATION-TYPE OBJECTS { hh3cMACInfoTrapVerExt, hh3cMACInfoTrapIndexExt, hh3cMACInfoTrapCountExt, hh3cMACInfoTrapMsgExt } STATUS current DESCRIPTION "When the cached number of MAC address information is reached the value specified by hh3cMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by hh3cMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when hh3cMACInfomationWorkMode is set to trap(1). When the hh3cMACInfomationWorkMode is set to syslog(2), No trap will be generated even hh3cMACInformationEnabled is set to enabled(1) and the feature is enabled on interface." ::= { hh3cMACInformationTrapsExt 1 } hh3cMACInformationMovedTrap NOTIFICATION-TYPE OBJECTS { hh3cMACInfoTrapMsgMovedAddress, hh3cMACInfoTrapMsgMovedVlan, hh3cMACInfoTrapMsgMovedFromIf, hh3cMACInfoTrapMsgMovedToIf, hh3cMACInfoTrapMsgMovedCount } STATUS current DESCRIPTION "When the MAC address has been moved to another interface, trap is generated and is sent to the remote monitoring device." ::= { hh3cMACInformationTrapsExt 2 } hh3cMACInformationTrapObjectsExt OBJECT IDENTIFIER ::= { hh3cMACInformationMibTrapExt 2 } hh3cMACInfoTrapVerExt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The version of trap information." ::= { hh3cMACInformationTrapObjectsExt 1 } hh3cMACInfoTrapIndexExt OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The sequence number of trap information. When it reaches the maximum value, it should be set to 1." ::= { hh3cMACInformationTrapObjectsExt 2 } hh3cMACInfoTrapCountExt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell." ::= { hh3cMACInformationTrapObjectsExt 3 } hh3cMACInfoTrapMsgExt OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..254)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '...'. Each cell consists of 14 octets in the format of ''. is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. is the MAC address and has size of 6 octets. is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - Reserved is the index of the interface where the MAC address is learnt or removed and has size of 4 octets." ::= { hh3cMACInformationTrapObjectsExt 4 } hh3cMACInfoTrapMsgMovedAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The MAC address that is moved between interfaces." ::= { hh3cMACInformationTrapObjectsExt 5 } hh3cMACInfoTrapMsgMovedVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The VLAN number in which the MAC address is moved." ::= { hh3cMACInformationTrapObjectsExt 6} hh3cMACInfoTrapMsgMovedFromIf OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of the interface from which the MAC address is moved." ::= { hh3cMACInformationTrapObjectsExt 7 } hh3cMACInfoTrapMsgMovedToIf OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of the interface to which the MAC address is moved." ::= { hh3cMACInformationTrapObjectsExt 8 } hh3cMACInfoTrapMsgMovedCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The times for which the MAC address has been moved between the interfaces." ::= { hh3cMACInformationTrapObjectsExt 9 } END