-- =========================================================================================================== -- Copyright (c) 2004-2014 New H3C Tech. Co., Ltd. All rights reserved. -- -- Description: Mdc MIB -- Reference: -- Version: V1.1 -- History: -- revision 1.0 2013-03-05 created by c08124 -- revision 1.1 2014-03-12 Modified hh3cMDCAllocateGroupIndex -- from (1..2147483647) to (-2147483648..2147483647) -- by j08116 -- -- ============================================================================================================ HH3C-MDC-MIB DEFINITIONS ::= BEGIN IMPORTS entPhysicalIndex FROM ENTITY-MIB hh3cCommon FROM HH3C-OID-MIB Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC; hh3cMDC MODULE-IDENTITY LAST-UPDATED "201303051448Z" ORGANIZATION "New H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085" DESCRIPTION "This MIB contains objects to manage MDC (Multitenant Device Context) operations. Such as: 1. Configure MDCs for a device and display MDCs and their status. 2. Assign CPU, storage space, and memory space resources to the MDC, and display their status. 3. Authorize the MDC to use the interface cards, and assign physical interfaces to an MDC. Default MDC: A device supporting MDCs is an MDC itself, and it is called the default MDC. From the default MDC, administrators can manage the entire physical device, create and delete non-default MDCs, and assign interfaces, CPU resources, storage space, and memory space to non-default MDCs. Non-default MDC: No MDCs can be created on a non-default MDC. Administrators of non-default MDCs can only manage and maintain their respective MDCs. A non-default MDC can use only the resources assigned to it." REVISION "201303051448Z" DESCRIPTION "The initial revision of this MIB module." ::= { hh3cCommon 136 } -- Scalar MIB objects, which are considered as global variables -- Global Level Configuration Hh3cMdcActionValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "start: start the MDC stop: stop the MDC" SYNTAX INTEGER { start(1), stop(2) } Hh3cMdcRunStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Status of the MDC: inactive: The MDC is stopped or not started yet. starting: The device is executing the mdc start command to start the MDC. active: The MDC is operating properly. stopping: The device is executing the undo mdc start command to stop the MDC. updating: The device is executing the location command to authorize the MDC to use an interface card." SYNTAX INTEGER { inactive(1), starting(2), active(3), stopping(4), updating(5) } -- Node definitions hh3cMDCScalarObjects OBJECT IDENTIFIER ::= { hh3cMDC 1 } hh3cMDCMaxMDCNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of MDCs which the system supported to create." ::= { hh3cMDCScalarObjects 1 } hh3cMDCCurrentMDCNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of MDCs which the system has created." ::= { hh3cMDCScalarObjects 2 } hh3cMDCTables OBJECT IDENTIFIER ::= { hh3cMDC 2 } -- The operation and information for MDC. hh3cMDCControl OBJECT IDENTIFIER ::= { hh3cMDCTables 1 } hh3cMDCControlTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMDCControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure MDCs for a device and show MDC's status." ::= { hh3cMDCControl 1 } hh3cMDCControlEntry OBJECT-TYPE SYNTAX Hh3cMDCControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hh3cMDCControlTable, every entry is corresponding with an MDC." INDEX { hh3cMDCIndex } ::= { hh3cMDCControlTable 1 } Hh3cMDCControlEntry ::= SEQUENCE { hh3cMDCIndex Integer32, hh3cMDCName DisplayString, hh3cMDCAction Hh3cMdcActionValue, hh3cMDCStatus Hh3cMdcRunStatus, hh3cMDCRowStatus RowStatus } hh3cMDCIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MDC ID is used as MDCIndex, the value range of MDC ID depends on the device model. MDCIndex cannot be modified after creation." ::= { hh3cMDCControlEntry 1 } hh3cMDCName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the MDC name, a case-sensitive string of 1 to 15 characters. The MDC name cannot be modified after creation." ::= { hh3cMDCControlEntry 2 } hh3cMDCAction OBJECT-TYPE SYNTAX Hh3cMdcActionValue MAX-ACCESS read-write STATUS current DESCRIPTION "State of MDC action: start/stop. After an MDC is started, administrators of the MDC can log in to the MDC for MDC configuration and maintenance. Stopping an MDC interrupts all services on the MDC and logs out all users of the MDC. Non-default MDC cannot operate." DEFVAL { stop } ::= { hh3cMDCControlEntry 3 } hh3cMDCStatus OBJECT-TYPE SYNTAX Hh3cMdcRunStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of MDCs." ::= { hh3cMDCControlEntry 4 } hh3cMDCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. Only support active, createAndGo and destroy." ::= { hh3cMDCControlEntry 5 } hh3cMDCResource OBJECT IDENTIFIER ::= { hh3cMDCTables 2 } hh3cMDCDISKResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMDCDISKResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for disk resource management: Specify a disk space percentage for an MDC and display the disk space usage. Default: All MDCs share the disk space in the system, and an MDC can use all free disk space in the system. Non-default MDC can only query the disk space usage." ::= { hh3cMDCResource 1 } hh3cMDCDISKResourceEntry OBJECT-TYPE SYNTAX Hh3cMDCDISKResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hh3cMDCDISKResourceTable, every entry is corresponding to disk resource of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." INDEX { entPhysicalIndex, hh3cMDCIndex, hh3cMDCDISKResourceInstance } ::= { hh3cMDCDISKResourceTable 1 } Hh3cMDCDISKResourceEntry ::= SEQUENCE { hh3cMDCDISKResourceInstance Integer32, hh3cMDCDISKResourceInstanceName DisplayString, hh3cMDCDISKResourceMinLimit Integer32, hh3cMDCDISKResourceMaxLimit Integer32, hh3cMDCDISKResourceReserve Unsigned32, hh3cMDCDISKResourceQuota Unsigned32, hh3cMDCDISKResourceUsage Unsigned32, hh3cMDCDISKResourceAvailable Unsigned32 } hh3cMDCDISKResourceInstance OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Instance index of disk resource. Different instances for disk: Flash, CF cards." ::= { hh3cMDCDISKResourceEntry 1 } hh3cMDCDISKResourceInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name of disk resource. Such as: Flash, CF cards." ::= { hh3cMDCDISKResourceEntry 2 } hh3cMDCDISKResourceMinLimit OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Limit minimum (reserve resources, must be all 0)." ::= { hh3cMDCDISKResourceEntry 3 } hh3cMDCDISKResourceMaxLimit OBJECT-TYPE SYNTAX Integer32 (1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum of available resources of disk. Make sure the disk space amount assigned to an MDC is greater than the disk space amount the MDC is using. Non-default MDC cannot set" ::= { hh3cMDCDISKResourceEntry 4 } hh3cMDCDISKResourceReserve OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The reserve limit resources of disk." ::= { hh3cMDCDISKResourceEntry 5 } hh3cMDCDISKResourceQuota OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total limit resources of disk according to hh3cMDCDiskResourceMaxLimit." ::= { hh3cMDCDISKResourceEntry 6 } hh3cMDCDISKResourceUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current usage of disk resources." ::= { hh3cMDCDISKResourceEntry 7 } hh3cMDCDISKResourceAvailable OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current available resources of disk." ::= { hh3cMDCDISKResourceEntry 8 } hh3cMDCMemoryResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMDCMemoryResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for memory resource management: Specify a memory space percentage for an MDC and display the memory space usage. Default: All MDCs share the memory space in the system, and an MDC can use all free memory. Non-default MDC can only query resource message of memory." ::= { hh3cMDCResource 2 } hh3cMDCMemoryResourceEntry OBJECT-TYPE SYNTAX Hh3cMDCMemoryResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hh3cMDCMemoryResourceTable, every entry is corresponding with memory resource of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." INDEX { entPhysicalIndex, hh3cMDCIndex } ::= { hh3cMDCMemoryResourceTable 1 } Hh3cMDCMemoryResourceEntry ::= SEQUENCE { hh3cMDCMemoryResourceMinLimit Integer32, hh3cMDCMemoryResourceMaxLimit Integer32, hh3cMDCMemoryResourceReserve Unsigned32, hh3cMDCMemoryResourceQuota Unsigned32, hh3cMDCMemoryResourceUsage Unsigned32, hh3cMDCMemoryResourceAvailable Unsigned32 } hh3cMDCMemoryResourceMinLimit OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Limit minimum(reserve resources, must be all 0). Non-default MDC cannot set." ::= { hh3cMDCMemoryResourceEntry 1 } hh3cMDCMemoryResourceMaxLimit OBJECT-TYPE SYNTAX Integer32 (1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum of available resources of memory, it specifies the ratio of the memory space that an MDC can use. Make sure this amount is sufficient for the MDC to operate properly. Non-default MDC cannot set." ::= { hh3cMDCMemoryResourceEntry 2 } hh3cMDCMemoryResourceReserve OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The reserve limit resources of memory." ::= { hh3cMDCMemoryResourceEntry 3 } hh3cMDCMemoryResourceQuota OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total limit resources of memory." ::= { hh3cMDCMemoryResourceEntry 4 } hh3cMDCMemoryResourceUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current usage of memory resources." ::= { hh3cMDCMemoryResourceEntry 5 } hh3cMDCMemoryResourceAvailable OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current available value of memory resources." ::= { hh3cMDCMemoryResourceEntry 6 } hh3cMDCCPUResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMDCCPUResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for CPU resource management: Specify a CPU weight for an MDC and display the CPU usage. The amount of CPU resources an MDC can use depends on the CPU weight settings for all MDCs that share the same CPU. Non-default MDC can only query CPU resources." ::= { hh3cMDCResource 3 } hh3cMDCCPUResourceEntry OBJECT-TYPE SYNTAX Hh3cMDCCPUResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hh3cMDCCPUResourceTable, every entry is corresponding with CPU resources of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." INDEX {entPhysicalIndex, hh3cMDCIndex } ::= { hh3cMDCCPUResourceTable 1 } Hh3cMDCCPUResourceEntry ::= SEQUENCE { hh3cMDCCPUResourceLimit Integer32, hh3cMDCCPUResourceUsage Integer32 } hh3cMDCCPUResourceLimit OBJECT-TYPE SYNTAX Integer32 (1..10) UNITS "weight" MAX-ACCESS read-write STATUS current DESCRIPTION "CPU weight-maximum of available resources of CPU, this number specifies a CPU weight for an MDC. Non-default MDC cannot set." ::= { hh3cMDCCPUResourceEntry 1 } hh3cMDCCPUResourceUsage OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "the CPU usage" ::= { hh3cMDCCPUResourceEntry 2 } -- The MDC location status. hh3cMDCLocation OBJECT IDENTIFIER ::= { hh3cMDCTables 3 } hh3cMDCLocationTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMDCLocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for location management: Authorize an MDC to use an interface card and query state of location. To assign physical interfaces to an MDC, administrators must authorize the MDC to use the interface cards to which the physical interfaces belong. Default: All interface cards of the device belong to the default MDC, and a non-default MDC cannot use any interface card. Non-default MDC can only query location state." ::= { hh3cMDCLocation 1 } hh3cMDCLocationEntry OBJECT-TYPE SYNTAX Hh3cMDCLocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hh3cMDCLocationTable, every entry is the status whether an MDC has been Authorized to use the interface cards. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." INDEX { entPhysicalIndex, hh3cMDCIndex } ::= { hh3cMDCLocationTable 1 } Hh3cMDCLocationEntry ::= SEQUENCE { hh3cMDCLocationStatus TruthValue } hh3cMDCLocationStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To authorize the MDC to use the interface cards, set the value of this object to 'true (1)'. To cancel the authorization, set this value to 'false (2)'. Note that the return noError means the command is being executed. For the execution result, check hh3cMDCLocationStatus." ::= { hh3cMDCLocationEntry 1 } -- The interfaces allocate information. hh3cMDCAllocate OBJECT IDENTIFIER ::= { hh3cMDCTables 4 } hh3cMDCGroupIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMDCGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indication of relation between interfaces and groups, which helps to realize the allocation, together with hh3cMDCAllocateTable. Non-default MDC cannot operate." ::= { hh3cMDCAllocate 1 } hh3cMDCGroupIfEntry OBJECT-TYPE SYNTAX Hh3cMDCGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hh3cMDCGroupIfTable, every entry is the relationship between interfaces and groups. Due to hardware restrictions, the interfaces on some interface cards are grouped. The interfaces in a group must be assigned to the same MDC at the same time or removed from an MDC at the same time. Interface grouping depends on the device model. This table is used for hh3cMDCAllocateTable to show interfae group lists. Note that only entPhysicalIndex values that represent physical ports (i.e., associated entPhysicalClass value is 'port(10)') are permitted to exist in this table." INDEX { entPhysicalIndex } ::= { hh3cMDCGroupIfTable 1 } Hh3cMDCGroupIfEntry ::= SEQUENCE { hh3cMDCGroupIdentity Integer32 } hh3cMDCGroupIdentity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface group ID. There are two parts for this id depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + group index + + ( bit 8..31 ) ( bit 0..7 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit7 (one byte), it is interfaces group index. From bit8 to bit31 (three bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." ::= { hh3cMDCGroupIfEntry 2 } hh3cMDCAllocateTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMDCAllocateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to assigning a physical interface to an MDC. It is allowed that allocate interfaces to a non-default MDC from the default MDC, and allocate interfaces back to the default MDC from a non-default MDC. All physical interfaces on the device belong to the default MDC, and a non-default MDC has no physical interfaces to use. Multiple physical interfaces can be assigned to a non-default MDC. A physical interface must meet the following conditions to be assigned to a non-default MDC: 1. Belongs to the default MDC. 2. Not the console or AUX port. 3. Not the management Ethernet interface. 4. Not in an interface group with an interface assigned to another MDC. 5. The default MDC uses only the physical interfaces that are not assigned to a non-default MDC. Non-default MDC cannot set this table." ::= { hh3cMDCAllocate 2 } hh3cMDCAllocateEntry OBJECT-TYPE SYNTAX Hh3cMDCAllocateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hh3cMDCAllocateTable, every entry is the status whether physical interfaces have been assigned to an MDC." INDEX { hh3cMDCAllocateGroupIndex } ::= { hh3cMDCAllocateTable 1 } Hh3cMDCAllocateEntry ::= SEQUENCE { hh3cMDCAllocateGroupIndex Integer32, hh3cMDCAllocateGroupDescription DisplayString, hh3cMDCAllocateMDCId Integer32 } hh3cMDCAllocateGroupIndex OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface group ID, the same as hh3cMDCGroupIdentity. There are two parts for this id. depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + group index + + ( bit 8..31 ) ( bit 0..7 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit7 (one byte), it is interfaces group index. From bit8 to bit31 (three bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." ::= { hh3cMDCAllocateEntry 1 } hh3cMDCAllocateGroupDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interfaces list Such as: GigabitEthernet4/5/0/1 to GigabitEthernet4/5/0/24, GigabitEthernet4/5/0/48" ::= { hh3cMDCAllocateEntry 2 } hh3cMDCAllocateMDCId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "MDC ID is used as hh3cMDCAllocateMDCId. Default MDC: It is allowed that allocate interfaces to non-default MDC from the default MDC, and allocate interfaces back to the default MDC from a non-default MDC. Non-default MDC cannot set allocation, can only query grouping of own MDC." ::= { hh3cMDCAllocateEntry 3 } hh3cMDCNotification OBJECT IDENTIFIER ::= { hh3cMDC 3 } hh3cMDCNotificationObjects OBJECT IDENTIFIER ::= { hh3cMDCNotification 0 } hh3cMDCStateChangeToActive NOTIFICATION-TYPE OBJECTS {hh3cMDCIndex, hh3cMDCName} STATUS current DESCRIPTION "The hh3cMDCStateChangeToActive trap indicates that the MDC status has changed to active." ::= { hh3cMDCNotificationObjects 1 } hh3cMDCStateChangeToInactive NOTIFICATION-TYPE OBJECTS {hh3cMDCIndex, hh3cMDCName} STATUS current DESCRIPTION "The hh3cMDCStateChangeToInactive trap indicates that the MDC status has changed to inactive." ::= { hh3cMDCNotificationObjects 2 } END