-- ============================================================================= -- Copyright (C) 2002-2003 New H3C Tech. Co., Ltd. All rights reserved. -- -- Description:MPLS-BGP-VPN-MIB -- Reference:This MIB was extracted from Draft-ietf-mpls-ldp-mib-01 -- Version: V1.6 -- History: -- VERSION AUTHOR/ Change Description -- OLD/NEW DATE -- -- #/1.1 Lingesh M + Initial create. -- 27/08/99 -- #/1.2 27/09/99 + Replaced the MIB objects -- - hh3cMplsLdpLsrMaxIngressCrlspTnls -- - hh3cMplsLdpLsrMaxInbetwnCrlspTnls -- with hh3cMplsLdpLsrMaxCrlspTnls -- 1.2/1.3 19/10/99 + Added hh3cMplsLdpPeerType in Peer Table. -- 04/10/99 + Added hh3cMplsLdpEntityIfTable. -- 1.3/1.4 23/11/99 + Added MIB object for Hello Hold Time in Entity -- Table, modified Cr-lsp Tnl index of type -- read-create to not-accessible. -- + Removed hh3cMplsLdpSessionRowStatus mib-object. -- -- 1.1 03/01/2k + MPLS Release 1.0.0.0 -- Naren -- -- 1.2 27/01/2k + Modified for MPLS Implementation -- Naren Following objects are added in the Incarnation table -- hh3cMplsLdpLsrMaxVcmCapability -- hh3cMplsLdpLsrVcmPathVecInAllLblMapPresent -- hh3cMplsLdpLsrRequestRetrytimerValue -- hh3cMplsLdpLsrNumOfRequestRetryAttempts -- Following Notifications are added -- hh3cMplsLdpIncarnUpEventFailure -- hh3cMplsLdpIncarnDownEventFailure -- hh3cMplsLdpEntityUpEventFailure -- hh3cMplsLdpEntityDownEventFailure -- -- 1.3 03/04/2k + Changed FS related identification to hh3c -- David related identification. -- 1.4 03/14/2003 add hh3cMplsLdpSessionUpEventFailure and hh3cMplsLdpSessionDownEventFailure -- V1.5 2004-10-12 updated by gaolong -- Change SYNTAX clause value from INTEGER to Unsigned because the value range is (1..4294967295). -- Change MAX-ACCESS clause value of hh3cMplsLdpCrlspTnlIndex to accessible-for-notify -- because this index node is used when sending notification. -- V1.6 2004-11-5 updated by liuxiaolong -- Change DEFVAL clause value of hh3cMplsLdpLsrHopCountLimit to 32. -- ==================================================================================== -- -- Full Copyright Notice of the MIB that was extracted from Draft-ietf-mpls-ldp-mib-01 as follows: -- --Copyright (C) The Internet Society (1999). All Rights Reserved. -- -- -- This document and translations of it may be copied and furnished to -- others, and derivative works that comment on or otherwise explain it -- or assist in its implementation may be prepared, copied, published -- and distributed, in whole or in part, without restriction of any -- kind, provided that the above copyright notice and this paragraph are -- included on all such copies and derivative works. However, this -- document itself may not be modified in any way, such as by removing -- the copyright notice or references to the Internet Society or other -- Internet organizations, except as needed for the purpose of -- developing Internet standards in which case the procedures for -- copyrights defined in the Internet Standards process must be -- followed, or as required to translate it into languages other than -- English. -- -- The limited permissions granted above are perpetual and will not be -- revoked by the Internet Society or its successors or assigns. -- -- This document and the information contained herein is provided on an -- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING -- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING -- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION -- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF -- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- MPLS Label Distribution Protocol MIB Definitions HH3C-MPLS-LDP-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cMpls FROM HH3C-OID-MIB OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32, Counter32, Unsigned32,IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeInterval FROM SNMPv2-TC; hh3cMplsLdp MODULE-IDENTITY LAST-UPDATED "9906301200Z" -- June 30, 1999 at 12:00 GMT ORGANIZATION "New H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085 " DESCRIPTION "All rights reserved" REVISION "9611082155Z" DESCRIPTION "The MIB for MPLS LDP module. This MIB has been derived from the MPLS Working group LDP MIB and MPLS Working group TE MIB ." ::= { hh3cMpls 2 } --******************************************************************** -- MPLS LDP Textual Conventions --******************************************************************** -- DisplayString ::= OCTET STRING -- This data type is used to model textual information taken -- from the NVT ASCII character set. By convention, objects -- with this syntax are declared as having -- (SIZE (0..255)) PhysAddress ::= OCTET STRING -- This data type is used to model media addresses. For many -- types of media, this will be in a binary representation. -- For example, an ethernet address would be represented as -- a string of 6 octets. BitRate ::= INTEGER BurstSize ::= INTEGER MplsLsrIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Label Switch Router (LSR) identifier is the first 4 bytes or the IP Address component of the Label Distribution Protocol (LDP) identifier." SYNTAX OCTET STRING (SIZE (4)) MplsLdpGenAddr ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of an network layer or data link layer address." SYNTAX OCTET STRING (SIZE (0..64)) MplsLdpIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The LDP identifier is a six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR." SYNTAX OCTET STRING (SIZE (6)) AtmVpIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The VPI value for a VPL. The value VPI=0 is not used for a VPL not associated with a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 1 to 255. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB." SYNTAX INTEGER (0..4095) AtmVcIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB." SYNTAX INTEGER (0..65535) AddressFamilyNumbers ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An address family. Values are defined in RFC 1700 - Assigned Numbers. All values may not be relevant in all contexts when used in this MIB, but are included for completeness." REFERENCE "RFC 1700 Assigned Numbers, Reynolds and Postel, Oct. 1994" SYNTAX INTEGER { other(0), ipv4(1), ipv6(2), nsap(3), hdlc(4), bbn1822(5), ieee802(6), e163(7), e164(8), f69(9), x121(10), ipx(11), appleTalk(12), decnetIV(13), banyanVines(14), e164WithNsap(15) } MplsLabel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents an MPLS label. Note that the contents of a label field are interpreted in an interface-type specific fashion. For example, the label carried in the MPLS shim header is 20 bits wide and the top 12 bits must be zero. The frame relay label can be either 10, 17 or 23 bits wide depending on the size of the DLCI field size and the top 22, 15, or 9 bits must be zero, respectively. For an ATM interface, the lowermost 16 bits are interpreted as the VCI, the next 8 bits as the VPI and the remaining bits must be zero. Also note the permissible label values are also a function of the interface type. For example, the value 3 has special semantics in the control plane for an MPLS shim header label and is not a valid label value in the datapath." REFERENCE "1. MPLS Label Stack Encoding, Rosen et al, draft- ietf-mpls-label-encaps-04.txt, April 1999. 2. Use of Label Switching on Frame Relay Networks, Conta et al, draft-ietf-mpls-fr-03.txt, Nov. 1998." SYNTAX INTEGER MplsTunnelIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Index into mplsTunnelTable." SYNTAX INTEGER (0..65535) hh3cMplsLdpObjects OBJECT IDENTIFIER ::= { hh3cMplsLdp 1 } hh3cMplsLdpNotifications OBJECT IDENTIFIER ::= { hh3cMplsLdp 2 } --**************************************************************** -- MPLS LDP Objects --**************************************************************** hh3cMplsLdpLsrObjects OBJECT IDENTIFIER ::= { hh3cMplsLdpObjects 1 } hh3cMplsLdpEntityObjects OBJECT IDENTIFIER ::= { hh3cMplsLdpObjects 2 } hh3cMplsLdpPeerObjects OBJECT IDENTIFIER ::= { hh3cMplsLdpObjects 3 } hh3cMplsLdpSessionObjects OBJECT IDENTIFIER ::= { hh3cMplsLdpObjects 4 } hh3cMplsLdpHelloAdjacencyObjects OBJECT IDENTIFIER ::= { hh3cMplsLdpObjects 5 } hh3cMplsLdpCrlspTnlObjects OBJECT IDENTIFIER ::= { hh3cMplsLdpObjects 6 } -- -- The MPLS Label Distribution Protocol Label Switch Router Objects -- hh3cMplsLdpLsrIncarnTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpLsrIncarnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS provides support for multiple incarnations of the MPLS Stack in a target. The LSR defined in the standard MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation." ::= { hh3cMplsLdpLsrObjects 1 } hh3cMplsLdpLsrIncarnEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpLsrIncarnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an LSR incarnation. All the entries in this table are created initially when the LDP is initiated. The row status of each entry will be in 'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to 'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier." INDEX { hh3cMplsLdpLsrIncarnID } ::= { hh3cMplsLdpLsrIncarnTable 1 } Hh3cMplsLdpLsrIncarnEntry ::= SEQUENCE { hh3cMplsLdpLsrID MplsLsrIdentifier, hh3cMplsLdpLsrLoopDetectionPresent TruthValue, hh3cMplsLdpLsrLoopDetectionAdminStatus INTEGER, hh3cMplsLdpLsrPathVectorLimit INTEGER, hh3cMplsLdpLsrHopCountLimit INTEGER, hh3cMplsLdpLsrLoopPreventionPresent TruthValue, hh3cMplsLdpLsrLoopPreventionAdminStatus INTEGER, hh3cMplsLdpLsrLabelRetentionMode INTEGER, hh3cMplsLdpLsrIncarnID INTEGER, hh3cMplsLdpLsrMaxLdpEntities INTEGER, hh3cMplsLdpLsrMaxLocalPeers INTEGER, hh3cMplsLdpLsrMaxRemotePeers INTEGER, hh3cMplsLdpLsrMaxIfaces INTEGER, hh3cMplsLdpLsrMaxLsps INTEGER, hh3cMplsLdpLsrMaxCrlspTnls INTEGER, hh3cMplsLdpLsrMaxErhopPerCrlspTnl INTEGER, hh3cMplsLdpLsrRowStatus RowStatus, hh3cMplsLdpLsrMaxVcmCapability INTEGER, hh3cMplsLdpLsrVcmPathVecInAllLblMapPresent TruthValue, hh3cMplsLdpLsrRequestRetrytimerValue INTEGER, hh3cMplsLdpLsrNumOfRequestRetryAttempts INTEGER } hh3cMplsLdpLsrID OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "The LSR's Identifier." ::= { hh3cMplsLdpLsrIncarnEntry 1 } hh3cMplsLdpLsrLoopDetectionPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection." DEFVAL { true } ::= { hh3cMplsLdpLsrIncarnEntry 2 } hh3cMplsLdpLsrLoopDetectionAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'." DEFVAL { enabled } ::= { hh3cMplsLdpLsrIncarnEntry 3 } hh3cMplsLdpLsrPathVectorLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop." DEFVAL { 32 } ::= { hh3cMplsLdpLsrIncarnEntry 4 } hh3cMplsLdpLsrHopCountLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it had traversed a loop." DEFVAL { 32 } ::= { hh3cMplsLdpLsrIncarnEntry 5 } hh3cMplsLdpLsrLoopPreventionPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Current release of MPLS does not provide support to assign this MIB object with a value 'true'." DEFVAL { false } ::= { hh3cMplsLdpLsrIncarnEntry 6 } hh3cMplsLdpLsrLoopPreventionAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of MPLS does not provide support to assign this MIB object with a value 'enabled'." DEFVAL { disabled } ::= { hh3cMplsLdpLsrIncarnEntry 7 } hh3cMplsLdpLsrLabelRetentionMode OBJECT-TYPE SYNTAX INTEGER { conservative(1), liberal(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are retained whether they are from a valid next hop or not. Current release of MPLS does not provide support to assign this MIB object with a value 'liberal'." DEFVAL { conservative } ::= { hh3cMplsLdpLsrIncarnEntry 8 } hh3cMplsLdpLsrIncarnID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The incarnation acts as index to all the elements in this table." ::= { hh3cMplsLdpLsrIncarnEntry 9 } hh3cMplsLdpLsrMaxLdpEntities OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of LDP entities that can be supported by this Incarnation." ::= { hh3cMplsLdpLsrIncarnEntry 10 } hh3cMplsLdpLsrMaxLocalPeers OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of Local LDP peers that can be supported by this Incarnation." ::= { hh3cMplsLdpLsrIncarnEntry 11 } hh3cMplsLdpLsrMaxRemotePeers OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of Remote LDP peers that can be supported by this Incarnation." ::= { hh3cMplsLdpLsrIncarnEntry 12 } hh3cMplsLdpLsrMaxIfaces OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of Label enabled Interfaces that can be supported by this Incarnation." ::= { hh3cMplsLdpLsrIncarnEntry 13 } hh3cMplsLdpLsrMaxLsps OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of Label Switched Paths that can be supported by this Incarnation." ::= { hh3cMplsLdpLsrIncarnEntry 14 } hh3cMplsLdpLsrMaxCrlspTnls OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of CRLSPs that can be supported by this Incarnation." ::= { hh3cMplsLdpLsrIncarnEntry 15 } hh3cMplsLdpLsrMaxErhopPerCrlspTnl OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " The maximum number of ER-Hops that can be supported in a CRLSP tunnel." ::= { hh3cMplsLdpLsrIncarnEntry 16 } hh3cMplsLdpLsrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { hh3cMplsLdpLsrIncarnEntry 17 } hh3cMplsLdpLsrMaxVcmCapability OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hh3cMplsLdpLsrIncarnEntry 18 } hh3cMplsLdpLsrVcmPathVecInAllLblMapPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hh3cMplsLdpLsrIncarnEntry 19 } hh3cMplsLdpLsrRequestRetrytimerValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hh3cMplsLdpLsrIncarnEntry 20 } hh3cMplsLdpLsrNumOfRequestRetryAttempts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hh3cMplsLdpLsrIncarnEntry 21 } -- -- The MPLS Label Distribution Protocol Entity Table -- hh3cMplsLdpEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR)." ::= { hh3cMplsLdpEntityObjects 1 } hh3cMplsLdpEntityEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier." INDEX { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityIfIndex } ::= { hh3cMplsLdpEntityTable 1 } Hh3cMplsLdpEntityEntry ::= SEQUENCE { hh3cMplsLdpEntityID MplsLdpIdentifier, hh3cMplsLdpEntityLabelSpaceType INTEGER, hh3cMplsLdpEntityDefVpi AtmVpIdentifier, hh3cMplsLdpEntityDefVci AtmVcIdentifier, hh3cMplsLdpEntityUnlabTrafVpi AtmVpIdentifier, hh3cMplsLdpEntityUnlabTrafVci AtmVcIdentifier, hh3cMplsLdpEntityMergeCapability INTEGER, hh3cMplsLdpEntityVcDirectionality INTEGER, hh3cMplsLdpEntityWellKnownDiscoveryPort INTEGER, hh3cMplsLdpEntityMtu INTEGER, hh3cMplsLdpEntityKeepAliveHoldTimer INTEGER, hh3cMplsLdpEntityFailedInitSessionThreshold INTEGER, hh3cMplsLdpEntityLabelDistributionMethod INTEGER, hh3cMplsLdpEntityLabelAllocationMethod INTEGER, hh3cMplsLdpEntityHelloHoldTimer INTEGER, hh3cMplsLdpEntityRowStatus RowStatus } hh3cMplsLdpEntityID OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR." REFERENCE "LDP Specification, Section on LDP Identifiers." ::= { hh3cMplsLdpEntityEntry 1 } hh3cMplsLdpEntityLabelSpaceType OBJECT-TYPE SYNTAX INTEGER { unknown(1), perInterface(2), perPlatform(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform." REFERENCE "LDP Specification, Section on Label Spaces." ::= { hh3cMplsLdpEntityEntry 2 } hh3cMplsLdpEntityDefVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The Default VPI value used in the label for the default VPI." ::= { hh3cMplsLdpEntityEntry 3 } hh3cMplsLdpEntityDefVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The Default VCI value used in the label for the default VCI." ::= { hh3cMplsLdpEntityEntry 4 } hh3cMplsLdpEntityUnlabTrafVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "VPI value of the VCC supporting unlabeled traffic." DEFVAL { 0 } ::= { hh3cMplsLdpEntityEntry 5 } hh3cMplsLdpEntityUnlabTrafVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "VCI value of the VCC supporting unlabeled traffic." DEFVAL { 32 } ::= { hh3cMplsLdpEntityEntry 6 } hh3cMplsLdpEntityMergeCapability OBJECT-TYPE SYNTAX INTEGER { noMerge(0), vpMerge(1), vcMerge(2), vpVcMerge(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Sets the merge capability for this LDP entity. Current Release of MPLS does not provide support for any kind of Merge." REFERENCE "draft-ietf-mpls-ldp-04.txt, Section 3.5.3" ::= { hh3cMplsLdpEntityEntry 7 } hh3cMplsLdpEntityVcDirectionality OBJECT-TYPE SYNTAX INTEGER { bidirectional(1), unidirectional(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Sets the VC directionality for this LDP entity." REFERENCE "draft-ietf-mpls-ldp-04.txt, Section 3.5.3" ::= { hh3cMplsLdpEntityEntry 8 } hh3cMplsLdpEntityWellKnownDiscoveryPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The well known LDP Discovery Port." ::= { hh3cMplsLdpEntityEntry 9 } hh3cMplsLdpEntityMtu OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum transmission unit (MTU) that was configured for this entity." ::= { hh3cMplsLdpEntityEntry 10 } hh3cMplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The two octet value which is the proposed keep alive hold timer for this LDP Entity." ::= { hh3cMplsLdpEntityEntry 11 } hh3cMplsLdpEntityFailedInitSessionThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero)." ::= { hh3cMplsLdpEntityEntry 12 } hh3cMplsLdpEntityLabelDistributionMethod OBJECT-TYPE SYNTAX INTEGER { downstreamOnDemand(1), downstreamUnsolicited(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "For any given LDP session, the method of label distribution must be specified. Current release of MPLS does not provide support for 'downstreamUnsolicited'." REFERENCE "draft-ietf-mpls-arch-04.txt [20]." ::= { hh3cMplsLdpEntityEntry 13 } hh3cMplsLdpEntityLabelAllocationMethod OBJECT-TYPE SYNTAX INTEGER { ordered(1), independent(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode." DEFVAL { ordered } ::= { hh3cMplsLdpEntityEntry 14 } hh3cMplsLdpEntityHelloHoldTimer OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The two octet value which is the proposed hello hold timer for this LDP Entity." ::= { hh3cMplsLdpEntityEntry 15 } hh3cMplsLdpEntityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { hh3cMplsLdpEntityEntry 16 } -- -- The MPLS LDP Entity Interface Table -- hh3cMplsLdpEntityIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpEntityIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity." ::= { hh3cMplsLdpEntityObjects 2 } hh3cMplsLdpEntityIfEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpEntityIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when the associted LDP Entity row status has the value notInService or notReady." INDEX { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityIfIndex } ::= { hh3cMplsLdpEntityIfTable 1 } Hh3cMplsLdpEntityIfEntry ::= SEQUENCE { hh3cMplsLdpEntityIfIndex Unsigned32, hh3cMplsLdpEntityIfIpv4Address IpAddress, hh3cMplsLdpEntityIfRowStatus RowStatus } hh3cMplsLdpEntityIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II" ::= { hh3cMplsLdpEntityIfEntry 1 } hh3cMplsLdpEntityIfIpv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 address associated with the interface." ::= { hh3cMplsLdpEntityIfEntry 2 } hh3cMplsLdpEntityIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { hh3cMplsLdpEntityIfEntry 3 } -- -- The MPLS LDP Entity Configurable ATM Label Range Table -- hh3cMplsLdpEntityConfAtmLabelRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpEntityConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table." ::= { hh3cMplsLdpEntityObjects 3 } hh3cMplsLdpEntityConfAtmLabelRangeEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpEntityConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table." INDEX { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityIfIndex, hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVPI, hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVCI } ::= { hh3cMplsLdpEntityConfAtmLabelRangeTable 1 } Hh3cMplsLdpEntityConfAtmLabelRangeEntry ::= SEQUENCE { hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVPI AtmVpIdentifier, hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVCI AtmVcIdentifier, hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVPI AtmVpIdentifier, hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVCI AtmVcIdentifier, hh3cMplsLdpEntityConfAtmLabelRangeRowStatus RowStatus } hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VPI number configured for this range." ::= { hh3cMplsLdpEntityConfAtmLabelRangeEntry 1 } hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VCI number configured for this range." ::= { hh3cMplsLdpEntityConfAtmLabelRangeEntry 2 } hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum VPI number configured for this range." ::= { hh3cMplsLdpEntityConfAtmLabelRangeEntry 3 } hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum VCI number configured for this range." ::= { hh3cMplsLdpEntityConfAtmLabelRangeEntry 4 } hh3cMplsLdpEntityConfAtmLabelRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { hh3cMplsLdpEntityConfAtmLabelRangeEntry 5 } -- -- The MPLS LDP Entity Statistics Table -- hh3cMplsLdpEntityStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpEntityStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR." ::= { hh3cMplsLdpEntityObjects 4 } hh3cMplsLdpEntityStatsEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpEntityStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table contains statistical information about an LDP Entity." AUGMENTS { hh3cMplsLdpEntityEntry } ::= { hh3cMplsLdpEntityStatsTable 1 } Hh3cMplsLdpEntityStatsEntry ::= SEQUENCE { hh3cMplsLdpAttemptedSessions Counter32 } hh3cMplsLdpAttemptedSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total attempted sessions for this LDP Entity." ::= { hh3cMplsLdpEntityStatsEntry 1 } -- -- The MPLS LDP Peer Table -- hh3cMplsLdpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent." ::= { hh3cMplsLdpPeerObjects 1 } hh3cMplsLdpPeerEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single Peer." INDEX { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityIfIndex, hh3cMplsLdpPeerIndex } ::= { hh3cMplsLdpPeerTable 1 } Hh3cMplsLdpPeerEntry ::= SEQUENCE { hh3cMplsLdpPeerIndex Unsigned32, hh3cMplsLdpPeerID MplsLdpIdentifier, hh3cMplsLdpPeerInternetworkAddrType AddressFamilyNumbers, hh3cMplsLdpPeerInternetworkAddr MplsLdpGenAddr, hh3cMplsLdpPeerDefaultMtu INTEGER, hh3cMplsLdpPeerKeepAliveHoldTimer INTEGER, hh3cMplsLdpPeerLabelDistributionMethod INTEGER, hh3cMplsLdpPeerType INTEGER, hh3cMplsLdpPeerRowStatus RowStatus } hh3cMplsLdpPeerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An identifier for the LDP peer that is unique within the scope of this agent." ::= { hh3cMplsLdpPeerEntry 1 } hh3cMplsLdpPeerID OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The LDP identifier of this LDP Peer." ::= { hh3cMplsLdpPeerEntry 2 } hh3cMplsLdpPeerInternetworkAddrType OBJECT-TYPE SYNTAX AddressFamilyNumbers MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the internetwork layer address of this LDP peer. This object indicates how the value of hh3cMplsLdpPeerInternetworkAddr is to be interpreted." ::= { hh3cMplsLdpPeerEntry 3 } hh3cMplsLdpPeerInternetworkAddr OBJECT-TYPE SYNTAX MplsLdpGenAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the internetwork layer address of this LDP peer." ::= { hh3cMplsLdpPeerEntry 4 } hh3cMplsLdpPeerDefaultMtu OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The default maximum transmission unit (MTU) of the LDP Peer." DEFVAL { 9180 } ::= { hh3cMplsLdpPeerEntry 5 } hh3cMplsLdpPeerKeepAliveHoldTimer OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval." ::= { hh3cMplsLdpPeerEntry 6 } hh3cMplsLdpPeerLabelDistributionMethod OBJECT-TYPE SYNTAX INTEGER { downstreamOnDemand(1), downstreamUnsolicited(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "For any given LDP session, the method of label distribution must be specified." REFERENCE "draft-ietf-mpls-arch-05.txt [20]." ::= { hh3cMplsLdpPeerEntry 7 } hh3cMplsLdpPeerType OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether a peer is a local peer or a remote peer" ::= { hh3cMplsLdpPeerEntry 8 } hh3cMplsLdpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { hh3cMplsLdpPeerEntry 9 } -- -- The MPLS LDP Peer Configurable ATM Label Range Table -- hh3cMplsLdpPeerConfAtmLabelRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpPeerConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table." ::= { hh3cMplsLdpPeerObjects 2 } hh3cMplsLdpPeerConfAtmLabelRangeEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpPeerConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table." INDEX { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityIfIndex, hh3cMplsLdpPeerIndex, hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVPI, hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVCI } ::= { hh3cMplsLdpPeerConfAtmLabelRangeTable 1 } Hh3cMplsLdpPeerConfAtmLabelRangeEntry ::= SEQUENCE { hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVPI AtmVpIdentifier, hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVCI AtmVcIdentifier, hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVPI AtmVpIdentifier, hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVCI AtmVcIdentifier } hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VPI number configured for this range." ::= { hh3cMplsLdpPeerConfAtmLabelRangeEntry 1 } hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VCI number configured for this range." ::= { hh3cMplsLdpPeerConfAtmLabelRangeEntry 2 } hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VPI number configured for this range." ::= { hh3cMplsLdpPeerConfAtmLabelRangeEntry 3 } hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VCI number configured for this range." ::= { hh3cMplsLdpPeerConfAtmLabelRangeEntry 4 } -- -- The MPLS LDP Sessions Table -- hh3cMplsLdpSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Sessions between the LDP Entities and LDP Peers." ::= { hh3cMplsLdpSessionObjects 1 } hh3cMplsLdpSessionEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents information on a single session between an LDP Entity and LDP Peer." INDEX { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityIfIndex, hh3cMplsLdpPeerIndex, hh3cMplsLdpSessionIndex } ::= { hh3cMplsLdpSessionTable 1 } Hh3cMplsLdpSessionEntry ::= SEQUENCE { hh3cMplsLdpSessionIndex Unsigned32, hh3cMplsLdpSessionID MplsLdpIdentifier, hh3cMplsLdpSessionProtocolVersion INTEGER, hh3cMplsLdpSessionKeepAliveHoldTimeRemaining TimeInterval, hh3cMplsLdpSessionRole INTEGER, hh3cMplsLdpSessionState INTEGER, hh3cMplsLdpSessionAtmLabelRangeLowerBoundVPI AtmVpIdentifier, hh3cMplsLdpSessionAtmLabelRangeLowerBoundVCI AtmVcIdentifier, hh3cMplsLdpSessionAtmLabelRangeUpperBoundVPI AtmVpIdentifier, hh3cMplsLdpSessionAtmLabelRangeUpperBoundVCI AtmVcIdentifier } hh3cMplsLdpSessionIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique identifier for this entry such that it identifies a specific LDP Session." ::= { hh3cMplsLdpSessionEntry 1 } hh3cMplsLdpSessionID OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The LDP Session identifier." ::= { hh3cMplsLdpSessionEntry 2 } hh3cMplsLdpSessionProtocolVersion OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the LDP Protocol which this session is using." ::= { hh3cMplsLdpSessionEntry 3 } hh3cMplsLdpSessionKeepAliveHoldTimeRemaining OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The keep alive hold time remaining for this session." ::= { hh3cMplsLdpSessionEntry 4 } hh3cMplsLdpSessionRole OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role." ::= { hh3cMplsLdpSessionEntry 5 } hh3cMplsLdpSessionState OBJECT-TYPE SYNTAX INTEGER { nonexistent(1), initialized(2), openrec(3), opensent(4), operational(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior." ::= { hh3cMplsLdpSessionEntry 6 } hh3cMplsLdpSessionAtmLabelRangeLowerBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum VPI number for this range." ::= { hh3cMplsLdpSessionEntry 7 } hh3cMplsLdpSessionAtmLabelRangeLowerBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum VCI number for this range." ::= { hh3cMplsLdpSessionEntry 8 } hh3cMplsLdpSessionAtmLabelRangeUpperBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VPI number for this range." ::= { hh3cMplsLdpSessionEntry 9 } hh3cMplsLdpSessionAtmLabelRangeUpperBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VCI number for this range." ::= { hh3cMplsLdpSessionEntry 10 } -- -- The MPLS LDP Hello Adjacency Table -- hh3cMplsLdpHelloAdjacencyTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpHelloAdjacencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Hello Adjacencies for Sessions." ::= { hh3cMplsLdpHelloAdjacencyObjects 1 } hh3cMplsLdpHelloAdjacencyEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpHelloAdjacencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies." INDEX { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityIfIndex, hh3cMplsLdpPeerIndex, hh3cMplsLdpSessionIndex, hh3cMplsLdpHelloAdjacencyIndex } ::= { hh3cMplsLdpHelloAdjacencyTable 1 } Hh3cMplsLdpHelloAdjacencyEntry ::= SEQUENCE { hh3cMplsLdpHelloAdjacencyIndex Unsigned32, hh3cMplsLdpHelloAdjacencyHoldTimeRemaining TimeInterval } hh3cMplsLdpHelloAdjacencyIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An identifier for the adjacency." ::= { hh3cMplsLdpHelloAdjacencyEntry 1 } hh3cMplsLdpHelloAdjacencyHoldTimeRemaining OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining for this Hello Adjacency." ::= { hh3cMplsLdpHelloAdjacencyEntry 2 } -- -- FSMPLS- CRLSP Table -- hh3cMplsLdpCrlspTnlTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpCrlspTnlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hh3cMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the hh3cMplsLdpCrlspErHopTable." ::= { hh3cMplsLdpCrlspTnlObjects 1 } hh3cMplsLdpCrlspTnlEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpCrlspTnlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator." INDEX { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpCrlspTnlIndex } ::= { hh3cMplsLdpCrlspTnlTable 1 } Hh3cMplsLdpCrlspTnlEntry ::= SEQUENCE { hh3cMplsLdpCrlspTnlIndex MplsTunnelIndex, hh3cMplsLdpCrlspTnlName DisplayString, hh3cMplsLdpCrlspTnlDirection INTEGER, hh3cMplsLdpCrlspTnlSignallingProto INTEGER, hh3cMplsLdpCrlspTnlSetupPrio INTEGER, hh3cMplsLdpCrlspTnlHoldingPrio INTEGER, hh3cMplsLdpCrlspTnlPeakDataRate BitRate, hh3cMplsLdpCrlspTnlPeakBurstSize BurstSize, hh3cMplsLdpCrlspTnlCommittedDataRate BitRate, hh3cMplsLdpCrlspTnlCommittedBurstSize BurstSize, hh3cMplsLdpCrlspTnlExcessBurstSize BurstSize, hh3cMplsLdpCrlspTnlIsPinned TruthValue, hh3cMplsLdpCrlspTnlFrequency INTEGER, hh3cMplsLdpCrlspTnlWeight INTEGER, hh3cMplsLdpCrlspTnlRowStatus RowStatus } hh3cMplsLdpCrlspTnlIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Uniquely identifies this row." ::= { hh3cMplsLdpCrlspTnlEntry 1 } hh3cMplsLdpCrlspTnlName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port." ::= { hh3cMplsLdpCrlspTnlEntry 2 } hh3cMplsLdpCrlspTnlDirection OBJECT-TYPE SYNTAX INTEGER { in(1), out(2), inOut(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional." ::= { hh3cMplsLdpCrlspTnlEntry 3 } hh3cMplsLdpCrlspTnlSignallingProto OBJECT-TYPE SYNTAX INTEGER { none(1), ldp(2), rsvp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The signaling protocol, if any, that set up this tunnel." DEFVAL { none } ::= { hh3cMplsLdpCrlspTnlEntry 4 } hh3cMplsLdpCrlspTnlSetupPrio OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The setup priority of this tunnel." REFERENCE "Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft , March 1999., Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , Feb. 1999." ::= { hh3cMplsLdpCrlspTnlEntry 5 } hh3cMplsLdpCrlspTnlHoldingPrio OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The holding priority for this tunnel." REFERENCE " Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft , March 1999., Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , Feb. 1999." ::= { hh3cMplsLdpCrlspTnlEntry 6 } hh3cMplsLdpCrlspTnlPeakDataRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The peak rate - the maximum rate at which traffic will be sent on the CRLSP." REFERENCE "Section 4.3.1.2, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { hh3cMplsLdpCrlspTnlEntry 7 } hh3cMplsLdpCrlspTnlPeakBurstSize OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP." REFERENCE "Section 4.3, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { hh3cMplsLdpCrlspTnlEntry 8 } hh3cMplsLdpCrlspTnlCommittedDataRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The committed rate - the committed rate at which traffic will be sent on the CRLSP." REFERENCE "Section 4.3.1.3, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { hh3cMplsLdpCrlspTnlEntry 9 } hh3cMplsLdpCrlspTnlCommittedBurstSize OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP." REFERENCE "Section 4.3, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { hh3cMplsLdpCrlspTnlEntry 10 } hh3cMplsLdpCrlspTnlExcessBurstSize OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP." REFERENCE "Section 4.3.1.4, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { hh3cMplsLdpCrlspTnlEntry 11 } hh3cMplsLdpCrlspTnlIsPinned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the loose-routed hops of this tunnel are to be pinned." DEFVAL { false } ::= { hh3cMplsLdpCrlspTnlEntry 12 } hh3cMplsLdpCrlspTnlFrequency OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the frequency of usage of the established CRLSP." REFERENCE "Section 4.3.1.1, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." ::= { hh3cMplsLdpCrlspTnlEntry 13 } hh3cMplsLdpCrlspTnlWeight OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the weight that is the established CRLSP." REFERENCE "Section 4.3, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." ::= { hh3cMplsLdpCrlspTnlEntry 14 } hh3cMplsLdpCrlspTnlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hh3cMplsLdpErHopTable, associated with this tunnel." ::= { hh3cMplsLdpCrlspTnlEntry 15 } -- -- Er-Hop Table -- hh3cMplsLdpCrlspErHopTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMplsLdpCrlspErHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hh3cMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hh3cMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hh3cMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel." ::= { hh3cMplsLdpCrlspTnlObjects 2 } hh3cMplsLdpCrlspErHopEntry OBJECT-TYPE SYNTAX Hh3cMplsLdpCrlspErHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP." INDEX { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpCrlspTnlIndex, hh3cMplsLdpCrlspErHopIndex } ::= { hh3cMplsLdpCrlspErHopTable 1 } Hh3cMplsLdpCrlspErHopEntry ::= SEQUENCE { hh3cMplsLdpCrlspErHopIndex INTEGER, hh3cMplsLdpCrlspErHopAddrType INTEGER, hh3cMplsLdpCrlspErHopIpv4Addr IpAddress, hh3cMplsLdpCrlspErHopIpv4PrefixLen INTEGER, hh3cMplsLdpCrlspErHopStrictOrLoose INTEGER, hh3cMplsLdpCrlspErHopRowStatus RowStatus } hh3cMplsLdpCrlspErHopIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying the particular hop." ::= { hh3cMplsLdpCrlspErHopEntry 1 } hh3cMplsLdpCrlspErHopAddrType OBJECT-TYPE SYNTAX INTEGER { ipV4(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Address type of this hop." DEFVAL { ipV4 } ::= { hh3cMplsLdpCrlspErHopEntry 2 } hh3cMplsLdpCrlspErHopIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0." ::= { hh3cMplsLdpCrlspErHopEntry 3 } hh3cMplsLdpCrlspErHopIpv4PrefixLen OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-create STATUS current DESCRIPTION "If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0." ::= { hh3cMplsLdpCrlspErHopEntry 4 } hh3cMplsLdpCrlspErHopStrictOrLoose OBJECT-TYPE SYNTAX INTEGER { strict(1), loose(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this is a strict or loose hop." ::= { hh3cMplsLdpCrlspErHopEntry 5 } hh3cMplsLdpCrlspErHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying and deleting this row." ::= { hh3cMplsLdpCrlspErHopEntry 6 } --- --- Notifications --- hh3cMplsLdpNotificationPrefix OBJECT IDENTIFIER ::= { hh3cMplsLdpNotifications 0 } hh3cMplsLdpFailedInitSessionThresholdExceeded NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityID, hh3cMplsLdpEntityFailedInitSessionThreshold } STATUS current DESCRIPTION "This notification is generated whenever the value of hh3cMplsLdpEntityFailedInitSessionThreshold is exceeded." ::= { hh3cMplsLdpNotificationPrefix 1 } -- OBJECTS { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityID, -- hh3cMplsLdpEntityFailedInitSessionThreshold -- } -- STATUS current -- DESCRIPTION -- "This notification is generated whenever the value -- of hh3cMplsLdpEntityFailedInitSessionThreshold is -- exceeded." -- ::= { hh3cMplsLdpNotificationPrefix 1 } hh3cMplsLdpCrlspTunnelUp NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityID, hh3cMplsLdpCrlspTnlIndex } STATUS current DESCRIPTION "This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel." ::= { hh3cMplsLdpNotificationPrefix 2 } hh3cMplsLdpCrlspTunnelDown NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityID, hh3cMplsLdpCrlspTnlIndex } STATUS current DESCRIPTION "This notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc.," ::= { hh3cMplsLdpNotificationPrefix 3 } hh3cMplsLdpCrlspTunnelSetupFailure NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityID, hh3cMplsLdpCrlspTnlIndex } STATUS current DESCRIPTION "This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc.," ::= { hh3cMplsLdpNotificationPrefix 4 } hh3cMplsLdpIncarnUpEventFailure NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpLsrIncarnID} STATUS current DESCRIPTION "This notification is generated by LDP to notify the Incarnation UP Event failure" ::= { hh3cMplsLdpNotificationPrefix 11 } hh3cMplsLdpIncarnDownEventFailure NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpLsrIncarnID } STATUS current DESCRIPTION "This notification is generated by LDP to notify the Incarnation DOWN Event failure" ::= { hh3cMplsLdpNotificationPrefix 12 } hh3cMplsLdpEntityUpEventFailure NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityID} STATUS current DESCRIPTION "This notification is generated by LDP to notify the ENTITY UP Event failure" ::= { hh3cMplsLdpNotificationPrefix 13 } hh3cMplsLdpEntityDownEventFailure NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpLsrIncarnID, hh3cMplsLdpEntityID } STATUS current DESCRIPTION "This notification is generated by LDP to notify the ENTITY DOWN Event failure" ::= { hh3cMplsLdpNotificationPrefix 14 } hh3cMplsLdpSessionUpEventFailure NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpSessionID, hh3cMplsLdpSessionState } STATUS current DESCRIPTION "Generation of this trap occurs when the value of 'hh3cMplsLdpSessionState' enters the 'operational(5)' state." ::= { hh3cMplsLdpNotificationPrefix 15 } hh3cMplsLdpSessionDownEventFailure NOTIFICATION-TYPE OBJECTS { hh3cMplsLdpSessionID, hh3cMplsLdpSessionState } STATUS current DESCRIPTION "Generation of this trap occurs when the value of 'hh3cMplsLdpSessionState' leaves the 'operational(5)' state." ::= { hh3cMplsLdpNotificationPrefix 16 } -- End of notifications. END