-- ==================================================================
-- Copyright (C) 2003 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: 802.1Q-in-Q and BPDU Tunnel MIB
-- Reference:
-- Version: V1.1
-- History:
-- V1.0 2006-03-10 Initial version Created by Baiping Chen
-- V1.1 2007/10/15 modified by wangjinwang
--   Add hh3cQinQServiceTPIDValue and hh3cQinQCustomerTPIDValue
--   to hh3cQinQGlobalConfigGroup.
--   Add hh3cQinQIfServiceTPIDValue hh3cQinQIfCustomerTPIDValue
--   hh3cQinQIfUplinkSwitch and hh3cQinQIfDownlinkSwitch
--   to hh3cQinQIfConfigTable.
-- ==================================================================
HH3C-QINQ-MIB DEFINITIONS ::= BEGIN
    IMPORTS
        RowStatus, TEXTUAL-CONVENTION
            FROM SNMPv2-TC
        MODULE-IDENTITY, OBJECT-TYPE, Integer32
            FROM SNMPv2-SMI
        ifIndex
            FROM RFC1213-MIB
        hh3cCommon
            FROM HH3C-OID-MIB;

-- ==================================================================
--
-- module identity part
--
-- ==================================================================
    hh3cQINQ MODULE-IDENTITY
        LAST-UPDATED
            "200603100000Z"
        ORGANIZATION
            "New H3C Tech. Co., Ltd."
        CONTACT-INFO
            "Platform Team New H3C Tech. Co., Ltd.
            Hai-Dian District Beijing P.R. China
            http://www.h3c.com
            Zip:100085
            "
        DESCRIPTION
            "802.1Q-in-Q MIB"
        REVISION
            "200603100000Z"
        DESCRIPTION
            "The initial version of this MIB."
        ::= { hh3cCommon 69 }


-- ==================================================================
--
-- Textual Conventions
--
-- ==================================================================
        Hh3cQinQSwitchState ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION
            "An enumerated value which indicates the state of
            switch."
        SYNTAX  INTEGER
        {
            enabled(1),
            disabled(2)
        }


-- ==================================================================
--
-- =====================object definition begin======================
--
-- ==================================================================
    hh3cQinQMibObject      OBJECT IDENTIFIER ::= { hh3cQINQ 1 }

    hh3cQinQGlobalConfigGroup OBJECT IDENTIFIER ::= { hh3cQinQMibObject 1 }

    hh3cQinQBpduTunnelSwitch  OBJECT-TYPE
        SYNTAX Hh3cQinQSwitchState
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The global configuration switch of BPDU 802.1q tunnel.
            If global configuration is disabled, BPDU tunnel function
            will be disabled despite of the corresponding configuration
            of interface. BPDU tunnel function of a certain interface
            would work only if the global and interface's switch are
            both enabled."
        DEFVAL { enabled }
        ::= { hh3cQinQGlobalConfigGroup 1 }

    hh3cQinQEthernetTypeValue  OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Ethernet protocol type configuring for a global value.
            The ethernet protocol type is also the TPID(Tag Protocol
            Identity) field of a VLAN tag described in 802.1q
            document. This value can be also configured for an
            individual interface or VLAN. The node that configure
            this value for a single interface is hh3cQinQIfEthernetType,
            whose priority is higher than hh3cQinQEthernetTypeValue.
            That means, if the value configured for a interface is
            different from the global value, the switch will select
            the configuration of the interface and ignore the global
            configuration. The ethernet protocol type of node
            hh3cQinQVidEthernetType that configured for a VLAN has
            the highest priority."
        DEFVAL { 33024 }
        ::= { hh3cQinQGlobalConfigGroup 2 }

    hh3cQinQServiceTPIDValue  OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Ethernet protocol type configured for service VLAN tags
            globally.  The ethernet protocol type is also the TPID(Tag
            Protocol Identity) field of a VLAN tag described in 802.1q
            document.  This value can be also configured for an
            individual interface.  The node that configure this
            value for a single interface is hh3cQinQIfServiceTPIDValue,
            whose priority is higher than hh3cQinQServiceTPIDValue.
            That means, if the value configured for a interface is
            different from the global value, the switch will select
            the configuration of the interface and ignore the global
            configuration."
        ::= { hh3cQinQGlobalConfigGroup 3 }

    hh3cQinQCustomerTPIDValue  OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Ethernet protocol type configured for customer VLAN tags
            globally.  The ethernet protocol type is also the TPID(Tag
            Protocol Identity) field of a VLAN tag described in 802.1q
            document.  This value can be also configured for an
            individual interface.  The node that configure this
            value for a single interface is hh3cQinQIfCustomerTPIDValue,
            whose priority is higher than hh3cQinQCustomerTPIDValue.
            That means, if the value configured for a interface is
            different from the global value, the switch will select
            the configuration of the interface and ignore the global
            configuration."
        ::= { hh3cQinQGlobalConfigGroup 4 }

    hh3cQinQBpduTunnelTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF Hh3cQinQBpduTunnelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table for configuring 802.1q BPDU tunnel function
            for interfaces."
        ::= { hh3cQinQMibObject 2 }

    hh3cQinQBpduTunnelEntry  OBJECT-TYPE
        SYNTAX      Hh3cQinQBpduTunnelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry for configuring 802.1q BPDU tunnel function
            for interfaces."
        INDEX
        {
            ifIndex,
            hh3cQinQProtocolIndex
        }
        ::= { hh3cQinQBpduTunnelTable 1 }

    Hh3cQinQBpduTunnelEntry ::=
        SEQUENCE
        {
            hh3cQinQProtocolIndex INTEGER,
            hh3cQinQBpduRowStatus RowStatus
        }

    hh3cQinQProtocolIndex  OBJECT-TYPE
        SYNTAX      INTEGER
        {
            bpdu(1),
            stp(2),
            gmosaic(3),
            igmp(4)
        }
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The index of protocol on which the BPDU tunnel state
            will be set. 'bpdu' represents status of BPDU tunnel.
            'stp' represents STP tunnel. 'gmosaic' represents GMOSAIC
            tunnel. 'igmp' represents IGMP tunnel. STP/GMOSAIC/IGMP
            tunnel will start to work only if BPDU tunnel and
            STP/GMOSAIC/IGMP tunnel are both enabled."
        ::= { hh3cQinQBpduTunnelEntry 1 }

    hh3cQinQBpduRowStatus     OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Operation status of this table entry."
        ::= { hh3cQinQBpduTunnelEntry 2 }


    hh3cQinQPriorityRemarkTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF Hh3cQinQPriorityRemarkEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table for configuring priority field in 802.1Q-in-Q
            outer VLAN tag for interfaces. This feature uses the
            priority of an inner VLAN tag to remark the priority
            of an outer VLAN tag."
        ::= { hh3cQinQMibObject 3 }

    hh3cQinQPriorityRemarkEntry  OBJECT-TYPE
        SYNTAX      Hh3cQinQPriorityRemarkEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry for configuring priority remark function for
            interfaces."
        INDEX
        {
            ifIndex,
            hh3cQinQPriorityValue
        }
        ::= { hh3cQinQPriorityRemarkTable 1 }

    Hh3cQinQPriorityRemarkEntry ::=
        SEQUENCE
        {
            hh3cQinQPriorityValue Integer32,
            hh3cQinQPriorityRemarkValue Integer32,
            hh3cQinQPriorityRowStatus RowStatus
        }

    hh3cQinQPriorityValue  OBJECT-TYPE
        SYNTAX      Integer32 (1..8)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The priority value in inner VLAN tag. Since the priority
            range is from 0 to 7, yet the index range is from 1 to 8.
            Thus, the actual priority value equals to the value that
            subtracts 1 from corresponding index value."
        ::= { hh3cQinQPriorityRemarkEntry 1 }

    hh3cQinQPriorityRemarkValue  OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The new priority value used to fill outer tag."
        ::= { hh3cQinQPriorityRemarkEntry 2 }

    hh3cQinQPriorityRowStatus     OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Operation status of this table entry."
        ::= { hh3cQinQPriorityRemarkEntry 3 }


    hh3cQinQVidTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF Hh3cQinQVidEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table for configuring VLAN ID of the 802.1Q-in-Q
            interfaces."
        ::= { hh3cQinQMibObject 4 }

    hh3cQinQVidEntry  OBJECT-TYPE
        SYNTAX      Hh3cQinQVidEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry for configuring VLAN ID of the 802.1Q-in-Q
            interfaces."
        INDEX
        {
            ifIndex,
            hh3cQinQVlanID
        }
        ::= { hh3cQinQVidTable 1 }

    Hh3cQinQVidEntry ::=
        SEQUENCE
        {
            hh3cQinQVlanID Integer32,
            hh3cQinQInboundVidListLow OCTET STRING,
            hh3cQinQInboundVidListHigh OCTET STRING,
            hh3cQinQVidEthernetType Integer32,
            hh3cQinQVidRowStatus RowStatus
        }

    hh3cQinQVlanID    OBJECT-TYPE
        SYNTAX      Integer32 (1..4094)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "VLAN ID"
        ::= { hh3cQinQVidEntry 1 }

    hh3cQinQInboundVidListLow    OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(256))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The inbound VLAN IDs which need 802.1Q-in-Q processing.
            The VLAN ID range, described by bitmap, is from 1 to
            2048. The length of bitmap is 256 in bytes. Each octet
            within this value specifies a set of eight VLANs, with
            the first octet specifying VLANs 1 through 8, the second
            octet specifying VLANs 9 through 16, etc. Within each
            octet, the most significant bit represents the highest
            numbered VLAN, and the least significant bit represents
            the lowest numbered VLAN."
        ::= { hh3cQinQVidEntry 2 }

    hh3cQinQInboundVidListHigh    OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(256))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The inbound VLAN IDs which need 802.1Q-in-Q processing.
            The VLAN ID range, described by bitmap, is from 2049 to
            4094. The length of bitmap is 256 in bytes. Each octet
            within this value specifies a set of eight VLANs, with
            the first octet specifying VLANs 2049 through 2056, the
            second octet specifying VLANs 2057 through 2064, etc.
            Within each octet, the most significant bit represents
            the highest numbered VLAN, and the least significant bit
            represents the lowest numbered VLAN."
        ::= { hh3cQinQVidEntry 3 }

    hh3cQinQVidEthernetType   OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Ethernet protocol type configuring for a VLAN."
        DEFVAL { 33024 }
        ::= { hh3cQinQVidEntry 4 }

    hh3cQinQVidRowStatus  OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Operation status of this table entry."
        ::= { hh3cQinQVidEntry 5 }


    hh3cQinQVidSwapTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF Hh3cQinQVidSwapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table for configuring 802.1Q-in-Q inner VLAN ID
            swapping function for interfaces."
        ::= { hh3cQinQMibObject 5 }

    hh3cQinQVidSwapEntry  OBJECT-TYPE
        SYNTAX      Hh3cQinQVidSwapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry for configuring 802.1Q-in-Q inner VLAN ID
            swapping function for interfaces."
        INDEX
        {
            ifIndex,
            hh3cQinQVlanID,
            hh3cQinQVidSwapOld
        }
        ::= { hh3cQinQVidSwapTable 1 }

    Hh3cQinQVidSwapEntry ::=
        SEQUENCE
        {
            hh3cQinQVidSwapOld Integer32,
            hh3cQinQVidSwapNew Integer32,
            hh3cQinQVidSwapRowStatus RowStatus
        }

    hh3cQinQVidSwapOld    OBJECT-TYPE
        SYNTAX      Integer32 (1..4094)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The old VLAN ID of original 802.1Q packets."
        ::= { hh3cQinQVidSwapEntry 1 }

    hh3cQinQVidSwapNew    OBJECT-TYPE
        SYNTAX      Integer32 (1..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The new VLAN ID of original 802.1Q packets."
        ::= { hh3cQinQVidSwapEntry 2 }

    hh3cQinQVidSwapRowStatus     OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Operation status of this table entry."
        ::= { hh3cQinQVidSwapEntry 3 }


    hh3cQinQPrioritySwapTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF Hh3cQinQPrioritySwapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table for configuring 802.1Q-in-Q inner VLAN priority
            swapping function for interfaces. Using this function,
            the priority of inner VLAN tag can be modified."
        ::= { hh3cQinQMibObject 6 }

    hh3cQinQPrioritySwapEntry  OBJECT-TYPE
        SYNTAX      Hh3cQinQPrioritySwapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry for configuring 802.1Q-in-Q inner VLAN
            priority swapping function for interfaces."
        INDEX
        {
            ifIndex,
            hh3cQinQVlanID,
            hh3cQinQPrioritySwapOld
        }
        ::= { hh3cQinQPrioritySwapTable 1 }

    Hh3cQinQPrioritySwapEntry ::=
        SEQUENCE
        {
            hh3cQinQPrioritySwapOld Integer32,
            hh3cQinQPrioritySwapNew Integer32,
            hh3cQinQPrioritySwapRowStatus RowStatus
        }

    hh3cQinQPrioritySwapOld    OBJECT-TYPE
        SYNTAX      Integer32 (1..8)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The old priority of original 802.1Q packets. It is the
            priority of inner VLAN tag. Since the VLAN priority range
            is from 0 to 7, yet the index range is from 1 to 8. Thus,
            the actual priority value equals to the value that
            subtracts 1 from corresponding index value."
        ::= { hh3cQinQPrioritySwapEntry 1 }

    hh3cQinQPrioritySwapNew    OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The new priority of original 802.1Q packets. It is the
            priority of inner VLAN tag after swapped."
        ::= { hh3cQinQPrioritySwapEntry 2 }

    hh3cQinQPrioritySwapRowStatus     OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Operation status of this table entry."
        ::= { hh3cQinQPrioritySwapEntry 3 }


    hh3cQinQIfConfigTable  OBJECT-TYPE
        SYNTAX      SEQUENCE OF Hh3cQinQIfConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table for configuring 802.1Q-in-Q functions for
            interfaces."
        ::= { hh3cQinQMibObject 7 }

    hh3cQinQIfConfigEntry  OBJECT-TYPE
        SYNTAX      Hh3cQinQIfConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry for configuring 802.1Q-in-Q functions for
            interfaces."
        INDEX
        {
            ifIndex
        }
        ::= { hh3cQinQIfConfigTable 1 }

    Hh3cQinQIfConfigEntry ::=
        SEQUENCE
        {
            hh3cQinQIfEthernetType Integer32,
            hh3cQinQIfSwitch Hh3cQinQSwitchState,
            hh3cQinQIfRowStatus RowStatus,
            hh3cQinQIfServiceTPIDValue Integer32,
            hh3cQinQIfCustomerTPIDValue Integer32,
            hh3cQinQIfUplinkSwitch Hh3cQinQSwitchState,
            hh3cQinQIfDownlinkSwitch Hh3cQinQSwitchState
        }

    hh3cQinQIfEthernetType    OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Ethernet protocol type configuring for an interface."
        DEFVAL { 33024 }
        ::= { hh3cQinQIfConfigEntry 1 }

    hh3cQinQIfSwitch    OBJECT-TYPE
        SYNTAX      Hh3cQinQSwitchState
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Switch of 802.1Q-in-Q functions configuring for an
            interface."
        DEFVAL { disabled }
        ::= { hh3cQinQIfConfigEntry 2 }

    hh3cQinQIfRowStatus    OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Operation status of this table entry."
        ::= { hh3cQinQIfConfigEntry 3 }

    hh3cQinQIfServiceTPIDValue    OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Service TPID value configured for an interface."
        ::= { hh3cQinQIfConfigEntry 4 }

    hh3cQinQIfCustomerTPIDValue    OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Customer TPID value configured for an interface."
        ::= { hh3cQinQIfConfigEntry 5 }

    hh3cQinQIfUplinkSwitch    OBJECT-TYPE
        SYNTAX      Hh3cQinQSwitchState
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Switch of the uplink 802.1Q-in-Q function
            for an interface."
        DEFVAL { disabled }
        ::= { hh3cQinQIfConfigEntry 6 }

    hh3cQinQIfDownlinkSwitch    OBJECT-TYPE
        SYNTAX      Hh3cQinQSwitchState
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Switch of the downlink 802.1Q-in-Q function
            for an interface."
        DEFVAL { disabled }
        ::= { hh3cQinQIfConfigEntry 7 }

END