-- =========================================================== -- Copyright (C) 2007 New H3C Tech. Co., Ltd. All rights reserved. -- Description: The MIB is designed to manage the snap of storage device. -- Reference: -- Version: V1.0 -- History: -- V1.0 2007-09-14 created by yangqi -- ================================================================= HH3C-STORAGE-SNAP-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, DateAndTime, RowStatus FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB entPhysicalIndex FROM ENTITY-MIB Hh3cStorageOnlineState, Hh3cStorageEnableState, Hh3cStorageActionType, Hh3cLvIDType, Hh3cRaidIDType, Hh3cExtendSelectPolicy, hh3cStorageRef FROM HH3C-STORAGE-REF-MIB; hh3cStorageSnap MODULE-IDENTITY LAST-UPDATED "200709141452Z" ORGANIZATION "New H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.h3c.com Zip:100085" DESCRIPTION "This MIB describes the general information about snap of storage device." ::= { hh3cStorageRef 2 } hh3cSnapMibObjects OBJECT IDENTIFIER ::= { hh3cStorageSnap 1 } hh3cGlobalSnapSettingsObject OBJECT IDENTIFIER ::= { hh3cSnapMibObjects 1 } hh3cAddtionalSpaceMaxSize OBJECT-TYPE SYNTAX Integer32 UNITS "TB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource ." ::= { hh3cGlobalSnapSettingsObject 1 } -- Snap Resource Config Table -- This table described how to config a snap on a special logic volume. hh3cSnapConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cSnapConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config the snapshot resources for special logic volumes." ::= { hh3cSnapMibObjects 2 } hh3cSnapConfigEntry OBJECT-TYPE SYNTAX Hh3cSnapConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing configuration about the snapshot resource." INDEX { hh3cSnapLvIndex } ::= { hh3cSnapConfigTable 1 } Hh3cSnapConfigEntry ::= SEQUENCE { hh3cSnapLvIndex Hh3cLvIDType, hh3cSnapAreaId Hh3cLvIDType, hh3cSnapAreaAutoExpand Hh3cStorageEnableState, hh3cSnapAreaThreshold Integer32, hh3cSnapAreaIncSize Integer32, hh3cSnapAreaMaxSize Integer32, hh3cSnapAreaFullDeleteTM INTEGER, hh3cSnapAreaNotify Hh3cStorageEnableState, hh3cSnapAreaStatus Hh3cStorageOnlineState, hh3cSnapRaidUuid Hh3cRaidIDType, hh3cSnapRaidSize Integer32, hh3cSnapRaidSelectPolicy Hh3cExtendSelectPolicy, hh3cSnapAreaTotalSize Integer32, hh3cSnapAreaFreeSize Integer32, hh3cSnapExtendTimes Integer32, hh3cSnapRowStatus RowStatus } hh3cSnapLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the index of hh3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of hh3cLvIndex." ::= { hh3cSnapConfigEntry 1 } hh3cSnapAreaId OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the snapshot resource of the logic volume." ::= { hh3cSnapConfigEntry 2 } hh3cSnapAreaAutoExpand OBJECT-TYPE SYNTAX Hh3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes if the space of snapshot resource can be expanded automatically." DEFVAL { disable } ::= { hh3cSnapConfigEntry 3 } hh3cSnapAreaThreshold OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaThreshold' means the threshold of the snapshot resource." ::= { hh3cSnapConfigEntry 4 } hh3cSnapAreaIncSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the amount of space to be allocated for each expansion." ::= { hh3cSnapConfigEntry 5 } hh3cSnapAreaMaxSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the max size of snapshot resource." ::= { hh3cSnapConfigEntry 6 } hh3cSnapAreaFullDeleteTM OBJECT-TYPE SYNTAX INTEGER { rotative(1), none(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not." DEFVAL { none } ::= { hh3cSnapConfigEntry 7 } hh3cSnapAreaNotify OBJECT-TYPE SYNTAX Hh3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes if a snapshot notification should be send to the client when the system create a timemark." ::= { hh3cSnapConfigEntry 8 } hh3cSnapAreaStatus OBJECT-TYPE SYNTAX Hh3cStorageOnlineState MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the state of the snapshot resource." ::= { hh3cSnapConfigEntry 9 } hh3cSnapRaidUuid OBJECT-TYPE SYNTAX Hh3cRaidIDType MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the raid where the snapshot resource is created." ::= { hh3cSnapConfigEntry 10 } hh3cSnapRaidSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the size designated when the snapshot resource is created." ::= { hh3cSnapConfigEntry 11 } hh3cSnapRaidSelectPolicy OBJECT-TYPE SYNTAX Hh3cExtendSelectPolicy MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated hh3cSnapRaidUuid object is equal to null." DEFVAL { none } ::= { hh3cSnapConfigEntry 12 } hh3cSnapAreaTotalSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the current total size of the snapshot resource." ::= { hh3cSnapConfigEntry 13 } hh3cSnapAreaFreeSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the free size of the snapshot resource." ::= { hh3cSnapConfigEntry 14 } hh3cSnapExtendTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the times the snapshot resource extended." ::= { hh3cSnapConfigEntry 15 } hh3cSnapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled." ::= { hh3cSnapConfigEntry 16 } -- Snap Resource Expand Table -- This table described how to expand a snapshot resource. hh3cSnapExpandTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cSnapExpandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to expand a snapshot resource." ::= { hh3cSnapMibObjects 3 } hh3cSnapExpandEntry OBJECT-TYPE SYNTAX Hh3cSnapExpandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing expand information applicable to the snapshot resource." INDEX { hh3cSnapLvIndex, hh3cSAExpRaidUuid } ::= { hh3cSnapExpandTable 1 } Hh3cSnapExpandEntry ::= SEQUENCE { hh3cSAExpRaidUuid Hh3cRaidIDType, hh3cSAExpSize Integer32, hh3cSAExpRaidSize Integer32, hh3cSnapAreaExpRowStatus RowStatus } hh3cSAExpRaidUuid OBJECT-TYPE SYNTAX Hh3cRaidIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to hh3cRaidUuid in HH3C-RAID-MIB." ::= { hh3cSnapExpandEntry 1 } hh3cSAExpSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read." ::= { hh3cSnapExpandEntry 2 } hh3cSAExpRaidSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read." ::= { hh3cSnapExpandEntry 3 } hh3cSnapAreaExpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the actions to expand the size for snap." ::= { hh3cSnapExpandEntry 4 } -- Snap Resource Copy Table -- This table described how to take a snapshot copy. hh3cSnapCopyTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cSnapCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity about snapshot copy." ::= { hh3cSnapMibObjects 4 } hh3cSnapCopyEntry OBJECT-TYPE SYNTAX Hh3cSnapCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing snapshot copy information applicable." INDEX { hh3cSnapLvIndex } ::= { hh3cSnapCopyTable 1 } Hh3cSnapCopyEntry ::= SEQUENCE { hh3cSnapCopyLvIndex Hh3cLvIDType, hh3cSnapCopyPercentage Integer32, hh3cSnapCopyStartTime DateAndTime, hh3cSnapCopySwitch INTEGER } hh3cSnapCopyLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the index of destination logic volume for snapshot copy." ::= { hh3cSnapCopyEntry 1 } hh3cSnapCopyPercentage OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'." ::= { hh3cSnapCopyEntry 2 } hh3cSnapCopyStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the time to start the snapshot copy." ::= { hh3cSnapCopyEntry 3 } hh3cSnapCopySwitch OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent." ::= { hh3cSnapCopyEntry 4 } -- TimeMark Resource Config Table -- This table described how to config a TimeMark resource on a special logic -- volume. hh3cTimeMarkConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTimeMarkConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config a TimeMark on a special logic volume." ::= { hh3cSnapMibObjects 5 } hh3cTimeMarkConfigEntry OBJECT-TYPE SYNTAX Hh3cTimeMarkConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to the TimeMark." INDEX { hh3cSnapLvIndex } ::= { hh3cTimeMarkConfigTable 1 } Hh3cTimeMarkConfigEntry ::= SEQUENCE { hh3cTimeMarkCounts Integer32, hh3cTimeMarkInitializeTime DateAndTime, hh3cTimeMarkInterval Integer32, hh3cTimeMarkLastTime DateAndTime, hh3cTimeMarkTotal Integer32, hh3cTimeMarkSwitch Hh3cStorageEnableState } hh3cTimeMarkCounts OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the max num of TimeMark which can be configed." ::= { hh3cTimeMarkConfigEntry 1 } hh3cTimeMarkInitializeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the date and time when the first TimeMark is created on the logic volume." ::= { hh3cTimeMarkConfigEntry 2 } hh3cTimeMarkInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds." ::= { hh3cTimeMarkConfigEntry 3 } hh3cTimeMarkLastTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the date and time when the latest TimeMark is created on the logic volume." ::= { hh3cTimeMarkConfigEntry 4 } hh3cTimeMarkTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the current num of TimeMark." ::= { hh3cTimeMarkConfigEntry 5 } hh3cTimeMarkSwitch OBJECT-TYPE SYNTAX Hh3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes enable or disable TimeMark." ::= { hh3cTimeMarkConfigEntry 6 } -- TimeMark Resource Create Table -- This table described how to create a TimeMark on a special logic -- volume. hh3cTimeMarkCreateTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTimeMarkCreateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to create a TimeMark on a special logic volume." ::= { hh3cSnapMibObjects 6 } hh3cTimeMarkCreateEntry OBJECT-TYPE SYNTAX Hh3cTimeMarkCreateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing create information applicable to the TimeMark." INDEX { hh3cSnapLvIndex, hh3cTimeMarkStamp } ::= { hh3cTimeMarkCreateTable 1 } Hh3cTimeMarkCreateEntry ::= SEQUENCE { hh3cTimeMarkStamp DateAndTime, hh3cTimeMarkComment OCTET STRING, hh3cTimeMarkSize Integer32, hh3cTimeMarkRowStatus RowStatus } hh3cTimeMarkStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the date and time the TimeMark is created." ::= { hh3cTimeMarkCreateEntry 1 } hh3cTimeMarkComment OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the comment of the TimeMark." ::= { hh3cTimeMarkCreateEntry 2 } hh3cTimeMarkSize OBJECT-TYPE SYNTAX Integer32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the current size of the TimeMark." ::= { hh3cTimeMarkCreateEntry 3 } hh3cTimeMarkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using." ::= { hh3cTimeMarkCreateEntry 4 } -- TimeMark Copy Table -- This table described how to do a TimeMark copy. hh3cTimeMarkCopyTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTimeMarkCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity about a TimeMark copy." ::= { hh3cSnapMibObjects 7 } hh3cTimeMarkCopyEntry OBJECT-TYPE SYNTAX Hh3cTimeMarkCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to the TimeMark copy." INDEX { hh3cSnapLvIndex, hh3cTimeMarkStamp } ::= { hh3cTimeMarkCopyTable 1 } Hh3cTimeMarkCopyEntry ::= SEQUENCE { hh3cTMCopyDestLvId Hh3cLvIDType, hh3cTMCopyPercentage Integer32, hh3cTMCopyStartTime DateAndTime, hh3cTMCopySwitch INTEGER } hh3cTMCopyDestLvId OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the index of destination logic volume for TimeMark copy." ::= { hh3cTimeMarkCopyEntry 1 } hh3cTMCopyPercentage OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'." ::= { hh3cTimeMarkCopyEntry 2 } hh3cTMCopyStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the time to start the TimeMark copy." ::= { hh3cTimeMarkCopyEntry 3 } hh3cTMCopySwitch OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get." ::= { hh3cTimeMarkCopyEntry 4 } -- TimeMark Rollback Table -- This table described how to use a TimeMark to rollback the logic volume. hh3cTimeMarkRollbackTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTimeMarkRollbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to use a TimeMark to rollback the logic volume." ::= { hh3cSnapMibObjects 8 } hh3cTimeMarkRollbackEntry OBJECT-TYPE SYNTAX Hh3cTimeMarkRollbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to use a TimeMark to rollback the logic volume." INDEX { hh3cSnapLvIndex, hh3cTimeMarkStamp } ::= { hh3cTimeMarkRollbackTable 1 } Hh3cTimeMarkRollbackEntry ::= SEQUENCE { hh3cTMRollbackPercentage Integer32, hh3cTMRollbackStartTime DateAndTime, hh3cTMRollbackSwitch Hh3cStorageActionType } hh3cTMRollbackPercentage OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the percentage of rollback." ::= { hh3cTimeMarkRollbackEntry 1 } hh3cTMRollbackStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the time to start the rollback." ::= { hh3cTimeMarkRollbackEntry 2 } hh3cTMRollbackSwitch OBJECT-TYPE SYNTAX Hh3cStorageActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted." ::= { hh3cTimeMarkRollbackEntry 3 } -- Time View Table -- This table described how to config TimeView on a special TimeMark -- mark. hh3cTimeViewTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTimeViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config a TimeView on a special TimeMark." ::= { hh3cSnapMibObjects 9 } hh3cTimeViewEntry OBJECT-TYPE SYNTAX Hh3cTimeViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to the TimeView." INDEX { hh3cSnapLvIndex, hh3cTimeViewStamp } ::= { hh3cTimeViewTable 1 } Hh3cTimeViewEntry ::= SEQUENCE { hh3cTimeViewStamp DateAndTime, hh3cTimeViewID Hh3cLvIDType, hh3cTimeViewName OCTET STRING, hh3cTimeViewRowStatus RowStatus } hh3cTimeViewStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of hh3cTimeMarkStamp." ::= { hh3cTimeViewEntry 1 } hh3cTimeViewID OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the TimeView. " ::= { hh3cTimeViewEntry 2 } hh3cTimeViewName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the name of the TimeView." ::= { hh3cTimeViewEntry 3 } hh3cTimeViewRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the actions to create or delete the TimeView." ::= { hh3cTimeViewEntry 4 } -- Logic Volume Replica Config Table -- This table described how to config logic volume replica. hh3cReplicaConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cReplicaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config replication for a logic volume." ::= { hh3cSnapMibObjects 10 } hh3cReplicaConfigEntry OBJECT-TYPE SYNTAX Hh3cReplicaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to the replication for a logic volume." INDEX { hh3cRepLocalLvIndex } ::= { hh3cReplicaConfigTable 1 } Hh3cReplicaConfigEntry ::= SEQUENCE { hh3cRepLocalLvIndex Hh3cLvIDType, hh3cLvRepLocalWay INTEGER, hh3cRepLocalServerIP InetAddress, hh3cRepLocalServerIPType InetAddressType, hh3cRepLocalServerName OCTET STRING, hh3cRepLocalServerUsername OCTET STRING, hh3cRepLocalServerPassword OCTET STRING, hh3cRepRemoteServerIP InetAddress, hh3cRepRemoteServerIPType InetAddressType, hh3cRepRemoteServerName OCTET STRING, hh3cRepRemoteServerUsername OCTET STRING, hh3cRepRemoteServerPassword OCTET STRING, hh3cRepRemoteLvIndex Hh3cLvIDType, hh3cReplicaMode INTEGER, hh3cReplicaWatermark Integer32, hh3cReplicaWatermarkRetry Integer32, hh3cReplicaInitializeTime DateAndTime, hh3cReplicaInterval Integer32, hh3cReplicaEncrypt Hh3cStorageEnableState, hh3cReplicaCompress Hh3cStorageEnableState, hh3cReplicaUseExistTM Hh3cStorageEnableState, hh3cReplicaProtocol INTEGER, hh3cReplicaScanDiff TruthValue, hh3cReplicaStatSwitch INTEGER, hh3cReplicaRowStatus RowStatus } hh3cRepLocalLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of hh3cSnapLvIndex." ::= { hh3cReplicaConfigEntry 1 } hh3cLvRepLocalWay OBJECT-TYPE SYNTAX INTEGER { outgoing(1), incoming(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of 'outgoing' means the hh3cRepLocalLvIndex is the primary logic volume of replication, and the hh3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the hh3cRepLocalLvIndex is the replica logic volume of replication. , and the hh3cRepRemoteLvIndex is the primary logic volume." ::= { hh3cReplicaConfigEntry 2 } hh3cRepLocalServerIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the ip address of local server." ::= { hh3cReplicaConfigEntry 3 } hh3cRepLocalServerIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the ip address type of local server." ::= { hh3cReplicaConfigEntry 4 } hh3cRepLocalServerName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the name of local server." ::= { hh3cReplicaConfigEntry 5 } hh3cRepLocalServerUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the username of local server." ::= { hh3cReplicaConfigEntry 6 } hh3cRepLocalServerPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the password of local server." ::= { hh3cReplicaConfigEntry 7 } hh3cRepRemoteServerIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the ip address of remote server." ::= { hh3cReplicaConfigEntry 8 } hh3cRepRemoteServerIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the ip address type of remote server." ::= { hh3cReplicaConfigEntry 9 } hh3cRepRemoteServerName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the name of remote server." ::= { hh3cReplicaConfigEntry 10 } hh3cRepRemoteServerUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the username of remote server." ::= { hh3cReplicaConfigEntry 11 } hh3cRepRemoteServerPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the password of remote server." ::= { hh3cReplicaConfigEntry 12 } hh3cRepRemoteLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the logic volume of remote server." ::= { hh3cReplicaConfigEntry 13 } hh3cReplicaMode OBJECT-TYPE SYNTAX INTEGER { adaptive(1), remote(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'." ::= { hh3cReplicaConfigEntry 14 } hh3cReplicaWatermark OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the size of watermark which means a replication is scheduled." ::= { hh3cReplicaConfigEntry 15 } hh3cReplicaWatermarkRetry OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "If the 'hh3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute." ::= { hh3cReplicaConfigEntry 16 } hh3cReplicaInitializeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the time to start an initial replication." ::= { hh3cReplicaConfigEntry 17 } hh3cReplicaInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies how often the replication should be repeated after initial replication. The units is minute." ::= { hh3cReplicaConfigEntry 18 } hh3cReplicaEncrypt OBJECT-TYPE SYNTAX Hh3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the encrypt option is enable or diable." DEFVAL { disable } ::= { hh3cReplicaConfigEntry 19 } hh3cReplicaCompress OBJECT-TYPE SYNTAX Hh3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the compress option is enable or diable." DEFVAL { disable } ::= { hh3cReplicaConfigEntry 20 } hh3cReplicaUseExistTM OBJECT-TYPE SYNTAX Hh3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies if using the exist TimeMark to replicate or not." DEFVAL { disable } ::= { hh3cReplicaConfigEntry 21 } hh3cReplicaProtocol OBJECT-TYPE SYNTAX INTEGER { tcp(1), rudp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol." ::= { hh3cReplicaConfigEntry 22 } hh3cReplicaScanDiff OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized." ::= { hh3cReplicaConfigEntry 23 } hh3cReplicaStatSwitch OBJECT-TYPE SYNTAX INTEGER { promte(1), sync(2), scan(3), reversal(4), stop(5), suspend(6), resume(7), none(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource." ::= { hh3cReplicaConfigEntry 24 } hh3cReplicaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to enable or disable the replication." ::= { hh3cReplicaConfigEntry 25 } -- Logic Volume Replication State Table -- This table described the replication state. hh3cReplicaStateTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cReplicaStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to show replication state." ::= { hh3cSnapMibObjects 11 } hh3cReplicaStateEntry OBJECT-TYPE SYNTAX Hh3cReplicaStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing show information applicable to the replication state." INDEX { hh3cRepLocalLvIndex } ::= { hh3cReplicaStateTable 1 } Hh3cReplicaStateEntry ::= SEQUENCE { hh3cReplicaDelta Integer32, hh3cReplicaLastSyncTime DateAndTime, hh3cReplicaNextSyncTime DateAndTime, hh3cReplicaSyncTotalSize Integer32, hh3cReplicaSyncCurPercentage Integer32, hh3cReplicaSyncPerformance Integer32, hh3cReplicaRunStatus INTEGER } hh3cReplicaDelta OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the size of delta data after last sync." ::= { hh3cReplicaStateEntry 1 } hh3cReplicaLastSyncTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the date and time when last sync is taken." ::= { hh3cReplicaStateEntry 2 } hh3cReplicaNextSyncTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the date and time when next sync will be taken." ::= { hh3cReplicaStateEntry 3 } hh3cReplicaSyncTotalSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies how much data need to be synchronized to the replica resource for current replication." ::= { hh3cReplicaStateEntry 4 } hh3cReplicaSyncCurPercentage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies how much data has been synchronized to the replica resource for current replication." ::= { hh3cReplicaStateEntry 5 } hh3cReplicaSyncPerformance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the performance of the synchronize. The unit is MB/s." ::= { hh3cReplicaStateEntry 6 } hh3cReplicaRunStatus OBJECT-TYPE SYNTAX INTEGER { suspend(1), idle(2), stop(3), sync(4), scan(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the state of the replica." ::= { hh3cReplicaStateEntry 7 } -- Continued replication Resource Config Table -- This table described how to config Continuous Replication Resource for a adaptive replication. hh3cCDRConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cCDRConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config Continuous Replication Resource." ::= { hh3cSnapMibObjects 12 } hh3cCDRConfigEntry OBJECT-TYPE SYNTAX Hh3cCDRConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to Continuous Replication Resource of the logic volume." INDEX { hh3cCDRLvIndex } ::= { hh3cCDRConfigTable 1 } Hh3cCDRConfigEntry ::= SEQUENCE { hh3cCDRLvIndex Hh3cLvIDType, hh3cCDRID Integer32, hh3cCDRStatus Hh3cStorageOnlineState, hh3cCDRTotalSize Integer32, hh3cCDRFreeSize Integer32, hh3cCDRSelectPolicy Hh3cExtendSelectPolicy, hh3cCDRRowStatus RowStatus } hh3cCDRLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of hh3cRepLocalLvIndex. Note that an entry of hh3cCDRConfigTable can be created only when the associated hh3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cCDRDistributeTable objects should be deleted automatically." ::= { hh3cCDRConfigEntry 1 } hh3cCDRID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the Continuous Replication Resource." ::= { hh3cCDRConfigEntry 2 } hh3cCDRStatus OBJECT-TYPE SYNTAX Hh3cStorageOnlineState MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the state of the Continuous Replication Resource." ::= { hh3cCDRConfigEntry 3 } hh3cCDRTotalSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the total size of the Continuous Replication Resource." ::= { hh3cCDRConfigEntry 4 } hh3cCDRFreeSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the free size of the Continuous Replication Resource." ::= { hh3cCDRConfigEntry 5 } hh3cCDRSelectPolicy OBJECT-TYPE SYNTAX Hh3cExtendSelectPolicy MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the policy about allocating the space for Continuous Replication Resource." DEFVAL { none } ::= { hh3cCDRConfigEntry 6 } hh3cCDRRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the Continuous Replication Resource." ::= { hh3cCDRConfigEntry 7 } -- Continuous Replication Resource Distributing Table -- This table described how to config the distribution of Continuous Replication Resource. hh3cCDRDistributeTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cCDRDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config the distribution of Continuous Replication Resource." ::= { hh3cSnapMibObjects 13 } hh3cCDRDistributeEntry OBJECT-TYPE SYNTAX Hh3cCDRDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to the distribution of Continuous Replication Resource." INDEX { hh3cCDRDistLvIndex, hh3cCDRRaidUuid } ::= { hh3cCDRDistributeTable 1 } Hh3cCDRDistributeEntry ::= SEQUENCE { hh3cCDRDistLvIndex Hh3cLvIDType, hh3cCDRRaidUuid Hh3cRaidIDType, hh3cCDRRaidSize Integer32, hh3cCDRExtRowStatus RowStatus } hh3cCDRDistLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB." ::= { hh3cCDRDistributeEntry 1 } hh3cCDRRaidUuid OBJECT-TYPE SYNTAX Hh3cRaidIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to hh3cRaidUuid in HH3C-RAID-MIB." ::= { hh3cCDRDistributeEntry 2 } hh3cCDRRaidSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the size on the special raid distributed for the Continuous Replication Resource." ::= { hh3cCDRDistributeEntry 3 } hh3cCDRExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create the distribution for the Continuous Replication Resource." ::= { hh3cCDRDistributeEntry 4 } -- SafeCache Config Table -- This table described how to config SafeCache of logic volume. hh3cSafeCacheConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cSafeCacheConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config SafeCache." ::= { hh3cSnapMibObjects 14 } hh3cSafeCacheConfigEntry OBJECT-TYPE SYNTAX Hh3cSafeCacheConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to SafeCache of the logic volume." INDEX { hh3cSafeCacheLvIndex } ::= { hh3cSafeCacheConfigTable 1 } Hh3cSafeCacheConfigEntry ::= SEQUENCE { hh3cSafeCacheLvIndex Hh3cLvIDType, hh3cSafeCacheID Integer32, hh3cSafeCacheStatus Hh3cStorageOnlineState, hh3cSafeCacheTotalSize Integer32, hh3cSafeCacheFreeSize Integer32, hh3cSafeCacheSelectPolicy Hh3cExtendSelectPolicy, hh3cSafeCacheThreshold Integer32, hh3cSafeCacheFlushTime Integer32, hh3cSafeCacheFlushCommand Integer32, hh3cSafeCacheSkipDupWrite INTEGER, hh3cSafeCacheRunStatus INTEGER, hh3cSafeCacheSwitch INTEGER, hh3cSafeCacheRowStatus RowStatus } hh3cSafeCacheLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cSafeCacheConfigTable can be created only when the associated hh3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cSafeCacheDistributeTable objects should be deleted automatically." ::= { hh3cSafeCacheConfigEntry 1 } hh3cSafeCacheID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies a SafeCache." ::= { hh3cSafeCacheConfigEntry 2 } hh3cSafeCacheStatus OBJECT-TYPE SYNTAX Hh3cStorageOnlineState MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the state of the SafeCache." ::= { hh3cSafeCacheConfigEntry 3 } hh3cSafeCacheTotalSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the total size of the SafeCache. The units is million bytes." ::= { hh3cSafeCacheConfigEntry 4 } hh3cSafeCacheFreeSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the free size of the SafeCache. The units is million bytes." ::= { hh3cSafeCacheConfigEntry 5 } hh3cSafeCacheSelectPolicy OBJECT-TYPE SYNTAX Hh3cExtendSelectPolicy MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the policy about allocating the space for SafeCache." DEFVAL { none } ::= { hh3cSafeCacheConfigEntry 6 } hh3cSafeCacheThreshold OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the maximal percentage of date changed before data flushing." ::= { hh3cSafeCacheConfigEntry 7 } hh3cSafeCacheFlushTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the period during which the date can stay in cache before data flushing. The units is second." ::= { hh3cSafeCacheConfigEntry 8 } hh3cSafeCacheFlushCommand OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the number of commands when data flushing." ::= { hh3cSafeCacheConfigEntry 9 } hh3cSafeCacheSkipDupWrite OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies skip duplicate write commands or not." ::= { hh3cSafeCacheConfigEntry 10 } hh3cSafeCacheRunStatus OBJECT-TYPE SYNTAX INTEGER { run(1), suspend(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the run state of the SafeCache." ::= { hh3cSafeCacheConfigEntry 11 } hh3cSafeCacheSwitch OBJECT-TYPE SYNTAX INTEGER { suspend(1), resume(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache." ::= { hh3cSafeCacheConfigEntry 12 } hh3cSafeCacheRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the SafeCache." ::= { hh3cSafeCacheConfigEntry 13 } -- SafeCache Resource Distributing Table -- This table described how to config SafeCache resource of logic volume. hh3cSafeCacheDistributeTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cSafeCacheDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config the SafeCache resource." ::= { hh3cSnapMibObjects 15 } hh3cSafeCacheDistributeEntry OBJECT-TYPE SYNTAX Hh3cSafeCacheDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to SafeCache resource of the logic volume." INDEX { hh3cSafeCacheDistLvIndex, hh3cSafeCacheRaidUuid } ::= { hh3cSafeCacheDistributeTable 1 } Hh3cSafeCacheDistributeEntry ::= SEQUENCE { hh3cSafeCacheDistLvIndex Hh3cLvIDType, hh3cSafeCacheRaidUuid Hh3cRaidIDType, hh3cSafeCacheRaidSize Integer32, hh3cSafeCacheExtRowStatus RowStatus } hh3cSafeCacheDistLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB." ::= { hh3cSafeCacheDistributeEntry 1 } hh3cSafeCacheRaidUuid OBJECT-TYPE SYNTAX Hh3cRaidIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to hh3cRaidUuid in HH3C-RAID-MIB." ::= { hh3cSafeCacheDistributeEntry 2 } hh3cSafeCacheRaidSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the size on the special raid distributed for the SafeCache resource." ::= { hh3cSafeCacheDistributeEntry 3 } hh3cSafeCacheExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create the distribution for the SafeCache resource." ::= { hh3cSafeCacheDistributeEntry 4 } -- Logic Volume Mirror Config Table -- This table described how to config mirror for a logic volume. hh3cMirrorConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMirrorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config mirror." ::= { hh3cSnapMibObjects 16 } hh3cMirrorConfigEntry OBJECT-TYPE SYNTAX Hh3cMirrorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to mirror for the logic volume." INDEX { hh3cMirrorLvIndex } ::= { hh3cMirrorConfigTable 1 } Hh3cMirrorConfigEntry ::= SEQUENCE { hh3cMirrorLvIndex Hh3cLvIDType, hh3cMirrorType INTEGER, hh3cMirrorStatus Hh3cStorageOnlineState, hh3cMirrorName OCTET STRING, hh3cMirrorSyncPercentage Integer32, hh3cMirrorSyncPerformance Integer32, hh3cMirrorDelta Integer32, hh3cMirrorRaidType INTEGER, hh3cMirrorSelectPolicy Hh3cExtendSelectPolicy, hh3cMirrorSwitch INTEGER, hh3cMirrorExtendRaidUuid Hh3cRaidIDType, hh3cMirrorRowStatus RowStatus } hh3cMirrorLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cMirrorConfigTable can be created only when the associated hh3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cMirrorDistributeTable objects should be deleted automatically." ::= { hh3cMirrorConfigEntry 1 } hh3cMirrorType OBJECT-TYPE SYNTAX INTEGER { sync(1), async(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the type of the mirror." ::= { hh3cMirrorConfigEntry 2 } hh3cMirrorStatus OBJECT-TYPE SYNTAX Hh3cStorageOnlineState MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the state of the mirror resource." ::= { hh3cMirrorConfigEntry 3 } hh3cMirrorName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the name of the mirror resource. it is used when promote mirror resource." ::= { hh3cMirrorConfigEntry 4 } hh3cMirrorSyncPercentage OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the percentage of the mirror sync." ::= { hh3cMirrorConfigEntry 5 } hh3cMirrorSyncPerformance OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the performance of the mirror sync. The unit is MB/S" ::= { hh3cMirrorConfigEntry 6 } hh3cMirrorDelta OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies size of delta data after the last mirror sync." ::= { hh3cMirrorConfigEntry 7 } hh3cMirrorRaidType OBJECT-TYPE SYNTAX INTEGER { virtual(1), serviceEnable(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the raid type of the mirror resource." ::= { hh3cMirrorConfigEntry 8 } hh3cMirrorSelectPolicy OBJECT-TYPE SYNTAX Hh3cExtendSelectPolicy MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the policy about allocating the space for mirror resource." DEFVAL { none } ::= { hh3cMirrorConfigEntry 9 } hh3cMirrorSwitch OBJECT-TYPE SYNTAX INTEGER { sync(1), swap(2), promote(3), none(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically." ::= { hh3cMirrorConfigEntry 10 } hh3cMirrorExtendRaidUuid OBJECT-TYPE SYNTAX Hh3cRaidIDType MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the raid of the mirror resource when the primary logic volume resource is extended." ::= { hh3cMirrorConfigEntry 11 } hh3cMirrorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the mirror resource." ::= { hh3cMirrorConfigEntry 12 } -- Logic Volume Mirror Resource Distributing Table -- This table described how to config mirror resource for logic volume. hh3cMirrorDistributeTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMirrorDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config the mirror resource." ::= { hh3cSnapMibObjects 17 } hh3cMirrorDistributeEntry OBJECT-TYPE SYNTAX Hh3cMirrorDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to mirror resource for the logic volume." INDEX { hh3cMirrorDistLvIndex, hh3cMirrorRaidUuid } ::= { hh3cMirrorDistributeTable 1 } Hh3cMirrorDistributeEntry ::= SEQUENCE { hh3cMirrorDistLvIndex Hh3cLvIDType, hh3cMirrorRaidUuid Hh3cRaidIDType, hh3cMirrorRaidSize Integer32, hh3cMirrorExtRowStatus RowStatus } hh3cMirrorDistLvIndex OBJECT-TYPE SYNTAX Hh3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB." ::= { hh3cMirrorDistributeEntry 1 } hh3cMirrorRaidUuid OBJECT-TYPE SYNTAX Hh3cRaidIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to hh3cRaidUuid in HH3C-RAID-MIB." ::= { hh3cMirrorDistributeEntry 2 } hh3cMirrorRaidSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the size on the special raid distributed for the mirror resource." ::= { hh3cMirrorDistributeEntry 3 } hh3cMirrorExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the distribution for the mirror resource." ::= { hh3cMirrorDistributeEntry 4 } END