WIPIPE-MIB DEFINITIONS ::= BEGIN -- WiPipe MIB Release 1.13 -- Copyright 2008-2016 by CradlePoint, Inc. All rights reserved -- This Specification is supplied "AS IS", CradlePoint makes no warranty, -- either expressed or implied, as to the use, operation, condition, -- or performance of the Specification. IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- =============================================================================================== -- textual conventions DisplayString ::= OCTET STRING -- This data type is used to model textual information taken -- from the NVT ASCII character set. By convention, objects -- with this syntax are declared as having -- -- SIZE (0..255) PhysAddress ::= OCTET STRING -- This data type is used to model media addresses. For many -- types of media, this will be in a binary representation. -- For example, an ethernet address would be represented as -- a string of 6 octets. -- groups in WIPIPE wipipe OBJECT IDENTIFIER ::= { enterprises 20992 } wipipeMgmt OBJECT IDENTIFIER ::= { wipipe 1 } wipipeProd OBJECT IDENTIFIER ::= { wipipe 2 } mbr1000 OBJECT IDENTIFIER ::= { wipipeProd 1 } ctr500 OBJECT IDENTIFIER ::= { wipipeProd 2 } mbr800 OBJECT IDENTIFIER ::= { wipipeProd 3 } mbr1100 OBJECT IDENTIFIER ::= { wipipeProd 4 } mbr1200 OBJECT IDENTIFIER ::= { wipipeProd 5 } mbr900 OBJECT IDENTIFIER ::= { wipipeProd 6 } cba250 OBJECT IDENTIFIER ::= { wipipeProd 7 } cba750 OBJECT IDENTIFIER ::= { wipipeProd 8 } cx111 OBJECT IDENTIFIER ::= { wipipeProd 9 } mbr1400 OBJECT IDENTIFIER ::= { wipipeProd 10 } mbr1200b OBJECT IDENTIFIER ::= { wipipeProd 11 } cbr400 OBJECT IDENTIFIER ::= { wipipeProd 12 } cbr450 OBJECT IDENTIFIER ::= { wipipeProd 13 } ibr600 OBJECT IDENTIFIER ::= { wipipeProd 14 } ibr650 OBJECT IDENTIFIER ::= { wipipeProd 15 } mbr1400v2 OBJECT IDENTIFIER ::= { wipipeProd 16 } cba750b OBJECT IDENTIFIER ::= { wipipeProd 17 } aer2100 OBJECT IDENTIFIER ::= { wipipeProd 18 } ibr1150 OBJECT IDENTIFIER ::= { wipipeProd 19 } ibr1100 OBJECT IDENTIFIER ::= { wipipeProd 20 } cba850 OBJECT IDENTIFIER ::= { wipipeProd 21 } ibr350 OBJECT IDENTIFIER ::= { wipipeProd 22 } aer3100 OBJECT IDENTIFIER ::= { wipipeProd 23 } aer1600 OBJECT IDENTIFIER ::= { wipipeProd 24 } ibr650b OBJECT IDENTIFIER ::= { wipipeProd 25 } aer3150 OBJECT IDENTIFIER ::= { wipipeProd 26 } aer1650 OBJECT IDENTIFIER ::= { wipipeProd 27 } aer2150 OBJECT IDENTIFIER ::= { wipipeProd 28 } ibr600b OBJECT IDENTIFIER ::= { wipipeProd 29 } ibr950 OBJECT IDENTIFIER ::= { wipipeProd 30 } ibr900 OBJECT IDENTIFIER ::= { wipipeProd 31 } wipipeDevice OBJECT IDENTIFIER ::= { wipipeMgmt 1 } wipipeCellMdm OBJECT IDENTIFIER ::= { wipipeMgmt 2 } -- the WiPipe Device Management group devFWVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual description providing the firmware version currently running on the device. It is mandatory that this only contain printable ASCII characters. @GET-FUNC=snmp_get_devFWVersion" ::= { wipipeDevice 1 } devFWUpgrade OBJECT-TYPE SYNTAX INTEGER { none (1), auto (2), manual (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Initiate a FW upgrade on the device. none - No upgrade is being performed or initiated. auto - If no other upgrade is begin performed, when this value is written then an automatic upgrade will be performed. When an automatic upgrade is done then the device will pull the most current FW image from the Wipipe server and install it. If this value is read then the router is performing an automatic upgrade and the devFWUpgradeStatus object should be read for further information. manual - If no other upgrade is begin performed, when this value is written then a manual upgrade will be performed. When an manual upgrade is done it will use the URL set in the devFWUpgradeURL object as the place to get the firmware image and install. If the devFWUpgradeURL object is not set then no upgrade will be performed. If this value is read then the router is performing an manual upgrade and the devFWUpgradeStatus object should be read for further information. - @SET-FUNC=snmp_set_devFWUpgrade @GET-FUNC=snmp_get_devFWUpgrade" ::= { wipipeDevice 2 } devFWUpgradeURL OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Set the URL that points to the firmware image that will be used when doing a manual firmware upgrade. @SET-FUNC=snmp_set_devFWUpgradeURL @GET-FUNC=snmp_get_devFWUpgradeURL" ::= { wipipeDevice 3 } devFWUpgradeStatus OBJECT-TYPE SYNTAX INTEGER { idle (1), upgrading (2), uptodate (3), updateAvail (4), failure (5) } ACCESS read-only STATUS mandatory DESCRIPTION "Show the result of the FW upgrade command. idle = there is no upgrade in process. upgrading = the new FW is being downloaded and written to flash. uptodate = the device is already at the latest FW. Nothing to upgrade. updateAvail - the device has an automatic update available. failure = some sort of failure occurred during the upgrade. The FW will not be upgraded. NOTE - while the FW image is being written to flash interrupts are disabled so no status will be returned at this time. User should get the FW version string in order to determine if the unit has been updated successfully. @GET-FUNC=snmp_get_devFWUpgradeStatus" ::= { wipipeDevice 4 } devGpioConfigInput OBJECT-TYPE SYNTAX INTEGER { none (1), input (2), reboot (3), ignitionSensing (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Set the Input GPIO config on the connector. none - ignore input value. input - read the input value. reboot - if the input is held low for 10 seconds, reboot the router. ignition_sensing - if the input is held low for 300 seconds, power off the router. IBR11x0 series feature. @SET-FUNC=snmp_set_devGpioConfigInput @GET-FUNC=snmp_get_devGpioConfigInput" ::= { wipipeDevice 5 } devGpioReadInput OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Read the Input GPIO value on the connector. 0 - low. 1 - high. @SET-FUNC=snmp_set_devGpioReadInput @GET-FUNC=snmp_get_devGpioReadInput" ::= { wipipeDevice 6 } devGpioConfigOutput OBJECT-TYPE SYNTAX INTEGER { low (1), high (2), routerRunning (3), modemConnected (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Set the output GPIO config on the connector. low - Default low output value. high - high output value. routerRunning - high output value once the router completes its boot process. modemConnected - high output value when the modem completes a data connection @SET-FUNC=snmp_set_devGpioConfigOutput @GET-FUNC=snmp_get_devGpioConfigOutput" ::= { wipipeDevice 7 } devGpioReadOutput OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Read the Output GPIO value on the connector. 0 - low. 1 - high. @SET-FUNC=snmp_set_devGpioReadOutput @GET-FUNC=snmp_get_devGpioReadOutput" ::= { wipipeDevice 8 } -- The WiPipe Cellular Modem Management Group mdmNumber OBJECT-TYPE SYNTAX INTEGER (0..10) ACCESS read-only STATUS mandatory DESCRIPTION "The number of Cellular Modems (regardless of their current state) present on this system. @GET-FUNC=snmp_get_mdmNumber" ::= { wipipeCellMdm 1 } mdmTable OBJECT-TYPE SYNTAX SEQUENCE OF MdmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Modem entries. The number of entries is given by the value of ifNumber." ::= { wipipeCellMdm 2 } mdmEntry OBJECT-TYPE SYNTAX MdmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing management information applicable to a particular modem. @ROW-FUNC=snmp_get_mdmTable_row" INDEX { mdmIndex }::= { mdmTable 1 } MdmEntry ::= SEQUENCE { mdmIndex INTEGER, mdmDescr DisplayString, mdmPort DisplayString, mdmSignalStrength INTEGER, mdmStatus INTEGER, mdmECIO INTEGER, mdmSerialNumber DisplayString, mdmFirmwareVersion DisplayString, mdmMDN DisplayString, mdmSERDIS DisplayString, mdmPROF DisplayString, mdmCINR INTEGER, mdmSINR INTEGER, mdmRSRP INTEGER, mdmRSRQ INTEGER, mdmROAM INTEGER, mdmRFBAND DisplayString, mdmHOMECARRIER DisplayString, mdmIMSI DisplayString, mdmIMEI DisplayString, mdmAPN DisplayString, mdmRFCHANNEL DisplayString } mdmIndex OBJECT-TYPE SYNTAX INTEGER (0..10) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value, greater than zero, for each cellular modem. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization." ::= { mdmEntry 1 } mdmDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing information about the modem." ::= { mdmEntry 2 } mdmPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing information about what port the modem is installed in." ::= { mdmEntry 3 } mdmSignalStrength OBJECT-TYPE SYNTAX INTEGER (-120..-30) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems signal strength, given in dBm's." ::= { mdmEntry 4 } mdmStatus OBJECT-TYPE SYNTAX INTEGER { established (1), establishing (2), ready (3), error (4), disconnected (5), disconnecting (6), suspended (7), empty (8), notconfigured (9), userstopped (10) } ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing infomation of the state of the modem." ::= { mdmEntry 5 } mdmECIO OBJECT-TYPE SYNTAX INTEGER (-120..0) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems Ec/Io ratio given in dBm's." ::= { mdmEntry 6 } mdmSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string representing the unique serial number of the device." ::= { mdmEntry 7 } mdmFirmwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string representing the current firmware version of the modem. Not all modems report this value." ::= { mdmEntry 8 } mdmMDN OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string representing the unique Mobile Directory Number of the device." ::= { mdmEntry 9 } mdmSERDIS OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string representing the Service Display of the device." ::= { mdmEntry 10 } mdmPROF OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string representing the Profile of the device." ::= { mdmEntry 11 } mdmCINR OBJECT-TYPE SYNTAX INTEGER (-120..0) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems CINR ratio given in dBm's." ::= { mdmEntry 12 } mdmSINR OBJECT-TYPE SYNTAX INTEGER (-20..40) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems SINR ratio given in dBm's." ::= { mdmEntry 13 } mdmRSRP OBJECT-TYPE SYNTAX INTEGER (-120..100) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems RSRP given in dBm's." ::= { mdmEntry 14 } mdmRSRQ OBJECT-TYPE SYNTAX INTEGER (-120..50) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems RSRQ given in dBm's." ::= { mdmEntry 15 } mdmROAM OBJECT-TYPE SYNTAX INTEGER (0..2) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems Roaming Status." ::= { mdmEntry 16 } mdmRFBAND OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems RF band." ::= { mdmEntry 17 } mdmHOMECARRIER OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems Home Carrier." ::= { mdmEntry 18 } mdmIMSI OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems IMSI." ::= { mdmEntry 19 } mdmIMEI OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems IMEI." ::= { mdmEntry 20 } mdmAPN OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems APN." ::= { mdmEntry 21 } mdmRFCHANNEL OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The cellular modems RF Channel." ::= { mdmEntry 22 } END