-- -- sle-performancemgmt-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Monday, May 16, 2016 at 16:24:57 -- SLE-PERFORMANCEMGMT-MIB DEFINITIONS ::= BEGIN IMPORTS sleMgmt FROM DASAN-SMI InterfaceIndex FROM IF-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, Integer32, Unsigned32, Gauge32, Counter64, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI; slePerformanceMgmt MODULE-IDENTITY LAST-UPDATED "200412291118Z" -- December 29, 2004 at 11:18 GMT ORGANIZATION "Organization." CONTACT-INFO "Contact-info." DESCRIPTION "Description." ::= { sleMgmt 5 } -- -- Type definitions -- SleControlStatusType ::= INTEGER { idle(1), busy(2), passed(3), failed(4) } SleControlRequestResultType ::= INTEGER { noRequest(1), comExecStarted(5), paramFaulty(11), requestBusy(12), setDataFailed(13), aswTimeout(14), commandFailed(15), commandSuccessed(16) } SleStatisticsClearTableIndexType ::= INTEGER { counter(1), portStatisticsTable(2), dot1xPortStatisticsTable(3), lldpStatisticsTable(4) } -- -- Node definitions -- slePortThreshold OBJECT IDENTIFIER ::= { slePerformanceMgmt 1 } -- 1.3.6.1.4.1.6296.101.5.1.1 -- 1.3.6.1.4.1.6296.101.5.1.1 slePortThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF SlePortThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { slePortThreshold 1 } -- 1.3.6.1.4.1.6296.101.5.1.1.1 -- 1.3.6.1.4.1.6296.101.5.1.1.1 slePortThresholdEntry OBJECT-TYPE SYNTAX SlePortThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleThresholdIndex } ::= { slePortThresholdTable 1 } SlePortThresholdEntry ::= SEQUENCE { sleThresholdIndex INTEGER, slePortThresholdUpLimit Integer32, slePortThresholdUpSamplingInterval INTEGER, slePortThresholdDownLimit Integer32, slePortThresholdDownSamplingInterval INTEGER, slePortThresholdBlockTimer INTEGER, slePortThresholdPpsCurrLimit Integer32, slePortThresholdPpsBlocked Integer32, slePortThresholdPpsLimit Integer32, slePortThresholdPpsInterval INTEGER, slePortThresholdPpsBlockTimer INTEGER, slePortThresholdWarnTxLimit Integer32, slePortThresholdWarnTxInterval INTEGER, slePortThresholdWarnTxDuration INTEGER, slePortThresholdWarnRxLimit Integer32, slePortThresholdWarnRxInterval INTEGER, slePortThresholdWarnRxDuration INTEGER, slePortThresholdAlarmTxLimit Integer32, slePortThresholdAlarmTxInterval INTEGER, slePortThresholdAlarmTxDuration INTEGER, slePortThresholdAlarmRxLimit Integer32, slePortThresholdAlarmRxInterval INTEGER, slePortThresholdAlarmRxDuration INTEGER } -- 1.3.6.1.4.1.6296.101.5.1.1.1.1 sleThresholdIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "port index." ::= { slePortThresholdEntry 1 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.2 slePortThresholdUpLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~" ::= { slePortThresholdEntry 2 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.3 slePortThresholdUpSamplingInterval OBJECT-TYPE SYNTAX INTEGER { clear(0), second5(5), second60(60), second600(600) } MAX-ACCESS read-write STATUS current DESCRIPTION "The sampling interval value in second. " ::= { slePortThresholdEntry 3 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.4 slePortThresholdDownLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~" ::= { slePortThresholdEntry 4 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.5 slePortThresholdDownSamplingInterval OBJECT-TYPE SYNTAX INTEGER { clear(0), second5(5), second60(60), second600(600) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdEntry 5 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.6 slePortThresholdBlockTimer OBJECT-TYPE SYNTAX INTEGER (-1 | 10..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdEntry 6 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.7 slePortThresholdPpsCurrLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdEntry 7 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.8 slePortThresholdPpsBlocked OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdEntry 8 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.9 slePortThresholdPpsLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdEntry 9 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.10 slePortThresholdPpsInterval OBJECT-TYPE SYNTAX INTEGER (0 | 5 | 60 | 600) MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdEntry 10 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.11 slePortThresholdPpsBlockTimer OBJECT-TYPE SYNTAX INTEGER (-1 | 10..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdEntry 11 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.12 slePortThresholdWarnTxLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~" ::= { slePortThresholdEntry 12 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.13 slePortThresholdWarnTxInterval OBJECT-TYPE SYNTAX INTEGER { clear(0), second5(5), second60(60), second600(600) } MAX-ACCESS read-only STATUS current DESCRIPTION "The sampling interval value in second. " ::= { slePortThresholdEntry 13 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.14 slePortThresholdWarnTxDuration OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The sampling duration value in second. Duration-time units by the 5 sec" ::= { slePortThresholdEntry 14 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.15 slePortThresholdWarnRxLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~" ::= { slePortThresholdEntry 15 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.16 slePortThresholdWarnRxInterval OBJECT-TYPE SYNTAX INTEGER { clear(0), second5(5), second60(60), second600(600) } MAX-ACCESS read-only STATUS current DESCRIPTION "The sampling interval value in second. " ::= { slePortThresholdEntry 16 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.17 slePortThresholdWarnRxDuration OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The sampling duration value in second. Duration-time units by the 5 sec" ::= { slePortThresholdEntry 17 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.18 slePortThresholdAlarmTxLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~" ::= { slePortThresholdEntry 18 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.19 slePortThresholdAlarmTxInterval OBJECT-TYPE SYNTAX INTEGER { clear(0), second5(5), second60(60), second600(600) } MAX-ACCESS read-only STATUS current DESCRIPTION "The sampling interval value in second. " ::= { slePortThresholdEntry 19 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.20 slePortThresholdAlarmTxDuration OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The sampling duration value in second. Duration-time units by the 5 sec" ::= { slePortThresholdEntry 20 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.21 slePortThresholdAlarmRxLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~" ::= { slePortThresholdEntry 21 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.22 slePortThresholdAlarmRxInterval OBJECT-TYPE SYNTAX INTEGER { clear(0), second5(5), second60(60), second600(600) } MAX-ACCESS read-only STATUS current DESCRIPTION "The sampling interval value in second. " ::= { slePortThresholdEntry 22 } -- 1.3.6.1.4.1.6296.101.5.1.1.1.23 slePortThresholdAlarmRxDuration OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The sampling duration value in second. Duration-time units by the 5 sec" ::= { slePortThresholdEntry 23 } -- 1.3.6.1.4.1.6296.101.5.1.2 -- 1.3.6.1.4.1.6296.101.5.1.2 slePortThresholdControl OBJECT IDENTIFIER ::= { slePortThreshold 2 } -- 1.3.6.1.4.1.6296.101.5.1.2.1 -- 1.3.6.1.4.1.6296.101.5.1.2.1 slePortThresholdControlRequest OBJECT-TYPE SYNTAX INTEGER { setPortThresholdProfile(1), setPortThresholdBlockProfile(2), setPortThresholdPPSProfile(3), setPortThresholdPPSBlockProfile(4), setPortThresholdWarnTxProfile(5), setPortThresholdWarnRxProfile(6), setPortThresholdAlarmTxProfile(7), setPortThresholdAlarmRxProfile(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 1 } -- 1.3.6.1.4.1.6296.101.5.1.2.2 -- 1.3.6.1.4.1.6296.101.5.1.2.2 slePortThresholdControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 2 } -- 1.3.6.1.4.1.6296.101.5.1.2.3 -- 1.3.6.1.4.1.6296.101.5.1.2.3 slePortThresholdControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 3 } -- 1.3.6.1.4.1.6296.101.5.1.2.4 -- 1.3.6.1.4.1.6296.101.5.1.2.4 slePortThresholdControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 4 } -- 1.3.6.1.4.1.6296.101.5.1.2.5 -- 1.3.6.1.4.1.6296.101.5.1.2.5 slePortThresholdControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 5 } -- 1.3.6.1.4.1.6296.101.5.1.2.6 -- 1.3.6.1.4.1.6296.101.5.1.2.6 slePortThresholdControlIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 6 } -- 1.3.6.1.4.1.6296.101.5.1.2.7 -- 1.3.6.1.4.1.6296.101.5.1.2.7 slePortThresholdControlThresholdUpLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~" ::= { slePortThresholdControl 7 } -- 1.3.6.1.4.1.6296.101.5.1.2.8 -- 1.3.6.1.4.1.6296.101.5.1.2.8 slePortThresholdControlUpSamplingInterval OBJECT-TYPE SYNTAX INTEGER { clear(0), second5(5), second60(60), second600(600) } MAX-ACCESS read-write STATUS current DESCRIPTION "The sampling interval value in second. " ::= { slePortThresholdControl 8 } -- 1.3.6.1.4.1.6296.101.5.1.2.9 -- 1.3.6.1.4.1.6296.101.5.1.2.9 slePortThresholdControlThresholdDownLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~" ::= { slePortThresholdControl 9 } -- 1.3.6.1.4.1.6296.101.5.1.2.10 -- 1.3.6.1.4.1.6296.101.5.1.2.10 slePortThresholdControlDownSamplingInterval OBJECT-TYPE SYNTAX INTEGER { clear(0), second5(5), second60(60), second600(600) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 10 } -- 1.3.6.1.4.1.6296.101.5.1.2.11 -- 1.3.6.1.4.1.6296.101.5.1.2.11 slePortThresholdControlBlockTimer OBJECT-TYPE SYNTAX INTEGER (-1 | 10..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 11 } -- 1.3.6.1.4.1.6296.101.5.1.2.12 -- 1.3.6.1.4.1.6296.101.5.1.2.12 slePortThresholdControlPpsLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 12 } -- 1.3.6.1.4.1.6296.101.5.1.2.13 -- 1.3.6.1.4.1.6296.101.5.1.2.13 slePortThresholdControlPpsInterval OBJECT-TYPE SYNTAX INTEGER (0 | 5 | 60 | 600) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 13 } -- 1.3.6.1.4.1.6296.101.5.1.2.14 -- 1.3.6.1.4.1.6296.101.5.1.2.14 slePortThresholdControlPpsBlockTimer OBJECT-TYPE SYNTAX INTEGER (-1 | 10..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortThresholdControl 14 } -- 1.3.6.1.4.1.6296.101.5.1.2.15 slePortThresholdControlThresholdLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of port bandwidth. Unit: Kbps Validvalues: 1~ ( -1 : delete threshold profile. )" ::= { slePortThresholdControl 15 } -- 1.3.6.1.4.1.6296.101.5.1.2.16 slePortThresholdControlSamplingInterval OBJECT-TYPE SYNTAX INTEGER { clear(0), second5(5), second60(60), second600(600) } MAX-ACCESS read-write STATUS current DESCRIPTION "The sampling interval value in second. " ::= { slePortThresholdControl 16 } -- 1.3.6.1.4.1.6296.101.5.1.2.17 slePortThresholdControlSamplingDuration OBJECT-TYPE SYNTAX INTEGER (5..300) MAX-ACCESS read-write STATUS current DESCRIPTION "The sampling interval value in second. Duration-time units by the 5 sec" ::= { slePortThresholdControl 17 } -- 1.3.6.1.4.1.6296.101.5.1.3 -- 1.3.6.1.4.1.6296.101.5.1.3 slePortThresholdNotification OBJECT IDENTIFIER ::= { slePortThreshold 3 } -- 1.3.6.1.4.1.6296.101.5.1.3.1 -- 1.3.6.1.4.1.6296.101.5.1.3.1 slePortThresholdChanged NOTIFICATION-TYPE OBJECTS { slePortThresholdUpLimit, slePortThresholdUpSamplingInterval, slePortThresholdDownLimit, slePortThresholdDownSamplingInterval, slePortThresholdWarnTxLimit, slePortThresholdWarnTxInterval, slePortThresholdWarnTxDuration, slePortThresholdWarnRxLimit, slePortThresholdWarnRxInterval, slePortThresholdWarnRxDuration, slePortThresholdAlarmTxLimit, slePortThresholdAlarmTxInterval, slePortThresholdAlarmTxDuration, slePortThresholdAlarmRxLimit, slePortThresholdAlarmRxInterval, slePortThresholdAlarmRxDuration, slePortThresholdControlRequest, slePortThresholdControlTimeStamp, slePortThresholdControlReqResult } STATUS current DESCRIPTION "Description." ::= { slePortThresholdNotification 1 } -- 1.3.6.1.4.1.6296.101.5.1.3.2 -- 1.3.6.1.4.1.6296.101.5.1.3.2 slePortThresholdBlockProfileChanged NOTIFICATION-TYPE OBJECTS { slePortThresholdControlRequest, slePortThresholdControlTimeStamp, slePortThresholdControlReqResult, slePortThresholdBlockTimer } STATUS current DESCRIPTION "Description." ::= { slePortThresholdNotification 2 } -- 1.3.6.1.4.1.6296.101.5.1.3.3 -- 1.3.6.1.4.1.6296.101.5.1.3.3 slePortThresholdPPSProfileChanged NOTIFICATION-TYPE OBJECTS { slePortThresholdControlRequest, slePortThresholdControlTimeStamp, slePortThresholdControlReqResult, slePortThresholdUpLimit, slePortThresholdUpSamplingInterval } STATUS current DESCRIPTION "Description." ::= { slePortThresholdNotification 3 } -- 1.3.6.1.4.1.6296.101.5.1.3.4 -- 1.3.6.1.4.1.6296.101.5.1.3.4 slePortThresholdPPSBlockProfileChanged NOTIFICATION-TYPE OBJECTS { slePortThresholdControlRequest, slePortThresholdControlTimeStamp, slePortThresholdControlReqResult, slePortThresholdPpsBlockTimer } STATUS current DESCRIPTION "Description." ::= { slePortThresholdNotification 4 } slePortRate OBJECT IDENTIFIER ::= { slePerformanceMgmt 2 } slePortRateTable OBJECT-TYPE SYNTAX SEQUENCE OF SlePortRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { slePortRate 1 } slePortRateEntry OBJECT-TYPE SYNTAX SlePortRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { slePortRateInterfaceIndex } ::= { slePortRateTable 1 } SlePortRateEntry ::= SEQUENCE { slePortRateInterfaceIndex INTEGER, slePortRateIngressRate Integer32, slePortRateEgressRate Integer32, slePortRateEnhanced INTEGER, slePortRateIngressRateType INTEGER } slePortRateInterfaceIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Index" ::= { slePortRateEntry 1 } slePortRateIngressRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress rate for port. The value is in units fo 64 kbps. For 100MB ports, the valid range is from 0 to 100000. For 1000MB ports, the valid range is from 0 to 1000000." ::= { slePortRateEntry 2 } slePortRateEgressRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress rate for port, The value is in units fo 64 kbps. For 100MB ports, the valid range is from 0 to 100000. For 1000MB ports, the valid range is from 0 to 1000000." ::= { slePortRateEntry 3 } slePortRateEnhanced OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortRateEntry 4 } slePortRateIngressRateType OBJECT-TYPE SYNTAX INTEGER { undefined(-1), drop(1), shape(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The ingress rate type" ::= { slePortRateEntry 5 } slePortRateControl OBJECT IDENTIFIER ::= { slePortRate 2 } slePortRateControlReqest OBJECT-TYPE SYNTAX INTEGER { setPortRateProfile(1), setPortRateEnhanced(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortRateControl 1 } slePortRateControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortRateControl 2 } slePortRateControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortRateControl 3 } slePortRateControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortRateControl 4 } slePortRateControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortRateControl 5 } slePortRateControlInterfaceIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { slePortRateControl 6 } slePortRateControlIngressRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Ingress rate for port. The value is in units fo 64 kbps. For 100MB ports, the valid range is from 0 to 100000. For 1000MB ports, the valid range is from 0 to 1000000." ::= { slePortRateControl 7 } slePortRateControlEgressRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Egress rate for port, The value is in units fo 64 kbps. For 100MB ports, the valid range is from 0 to 100000. For 1000MB ports, the valid range is from 0 to 1000000." ::= { slePortRateControl 8 } slePortRateControlEnhanced OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortRateControl 9 } slePortRateControlIngressRateType OBJECT-TYPE SYNTAX INTEGER { undefined(-1), drop(1), shape(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ingress rate type" ::= { slePortRateControl 10 } slePortRateNotification OBJECT IDENTIFIER ::= { slePortRate 3 } slePortRateProfileChanged NOTIFICATION-TYPE OBJECTS { slePortRateControlReqest, slePortRateControlTimeStamp, slePortRateControlReqResult, slePortRateIngressRate, slePortRateIngressRateType, slePortRateEgressRate } STATUS current DESCRIPTION "Description." ::= { slePortRateNotification 1 } slePortRateEnhancedChanged NOTIFICATION-TYPE OBJECTS { slePortRateControlReqest, slePortRateControlTimeStamp, slePortRateControlReqResult, slePortRateEnhanced } STATUS current DESCRIPTION "Description." ::= { slePortRateNotification 2 } slePortStatistics OBJECT IDENTIFIER ::= { slePerformanceMgmt 3 } slePortStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SlePortStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { slePortStatistics 1 } slePortStatisticsEntry OBJECT-TYPE SYNTAX SlePortStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { slePortStatsIndex, slePortStatsInterval, slePortStatsOrder } ::= { slePortStatisticsTable 1 } SlePortStatisticsEntry ::= SEQUENCE { slePortStatsIndex INTEGER, slePortStatsInterval INTEGER, slePortStatsOrder INTEGER, slePortStatsUpPackets Counter64, slePortStatsUpBytes Counter64, slePortStatsDownPackets Counter64, slePortStatsDownBytes Counter64 } slePortStatsIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Port index of EthernetPort, only valid for physical ports." ::= { slePortStatisticsEntry 1 } slePortStatsInterval OBJECT-TYPE SYNTAX INTEGER { fiveSeconds(5), oneMinute(60), fifteenMinutes(900), oneDay(86400) } MAX-ACCESS read-only STATUS current DESCRIPTION "Interval time of counters (unit: seconds)" ::= { slePortStatisticsEntry 2 } slePortStatsOrder OBJECT-TYPE SYNTAX INTEGER (0..95) MAX-ACCESS read-only STATUS current DESCRIPTION "History sequence of counters (0: current)" ::= { slePortStatisticsEntry 3 } slePortStatsUpPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream traffic utilization during slePortStatsInterval seconds. Unit: Accumulated packets per slePortStatsInterval" ::= { slePortStatisticsEntry 4 } slePortStatsUpBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream traffic utilization during slePortStatsInterval seconds. Unit: Accumulated bytes per slePortStatsInterval" ::= { slePortStatisticsEntry 5 } slePortStatsDownPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream traffic utilization during slePortStatsInterval seconds. Unit: Accumulated packets per slePortStatsInterval" ::= { slePortStatisticsEntry 6 } slePortStatsDownBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream traffic utilization during slePortStatsInterval seconds. Unit: Accumulated bytes per slePortStatsInterval" ::= { slePortStatisticsEntry 7 } slePortStatisticsControl OBJECT IDENTIFIER ::= { slePortStatistics 2 } slePortStatsControlRequest OBJECT-TYPE SYNTAX INTEGER { clearPortStatistics(1), clearPortStatisticsAll(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortStatisticsControl 1 } slePortStatsControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortStatisticsControl 2 } slePortStatsControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortStatisticsControl 3 } slePortStatsControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortStatisticsControl 4 } slePortStatsControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortStatisticsControl 5 } slePortStatsControlIndex OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortStatisticsControl 6 } slePortStatisticsNotification OBJECT IDENTIFIER ::= { slePortStatistics 3 } slePortStatisticsCleared NOTIFICATION-TYPE OBJECTS { slePortStatsControlRequest, slePortStatsControlTimeStamp, slePortStatsControlReqResult, slePortStatsIndex } STATUS current DESCRIPTION "Description." ::= { slePortStatisticsNotification 1 } slePortStatisticsAllCleared NOTIFICATION-TYPE OBJECTS { slePortStatsControlRequest, slePortStatsControlTimeStamp, slePortStatsControlReqResult } STATUS current DESCRIPTION "Description." ::= { slePortStatisticsNotification 2 } slePortStatisticsAverageTable OBJECT-TYPE SYNTAX SEQUENCE OF SlePortStatisticsAverageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { slePortStatistics 4 } slePortStatisticsAverageEntry OBJECT-TYPE SYNTAX SlePortStatisticsAverageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { slePortStatsIndex, slePortStatsAvgInterval } ::= { slePortStatisticsAverageTable 1 } SlePortStatisticsAverageEntry ::= SEQUENCE { slePortStatsAvgInterval INTEGER, slePortStatsAvgTxPackets Counter64, slePortStatsAvgTxBytes Counter64, slePortStatsAvgTxUcastPackets Counter64, slePortStatsAvgTxMcastPackets Counter64, slePortStatsAvgTxBcastPackets Counter64, slePortStatsAvgRxPackets Counter64, slePortStatsAvgRxBytes Counter64, slePortStatsAvgRxUcastPackets Counter64, slePortStatsAvgRxMcastPackets Counter64, slePortStatsAvgRxBcastPackets Counter64 } slePortStatsAvgInterval OBJECT-TYPE SYNTAX INTEGER { fiveSeconds(5), oneMinute(60), tenMinutes(600) } MAX-ACCESS read-only STATUS current DESCRIPTION "Interval time of counters (unit: seconds)" ::= { slePortStatisticsAverageEntry 1 } slePortStatsAvgTxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of upstream traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second " ::= { slePortStatisticsAverageEntry 2 } slePortStatsAvgTxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of upstream traffic calculated during slePortStatsAvgInterval seconds. Unit: bytes per second " ::= { slePortStatisticsAverageEntry 3 } slePortStatsAvgTxUcastPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of upstream unicast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second " ::= { slePortStatisticsAverageEntry 4 } slePortStatsAvgTxMcastPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of upstream multicast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second " ::= { slePortStatisticsAverageEntry 5 } slePortStatsAvgTxBcastPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of upstream broadcast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second " ::= { slePortStatisticsAverageEntry 6 } slePortStatsAvgRxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of downstream traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second " ::= { slePortStatisticsAverageEntry 7 } slePortStatsAvgRxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of downstream traffic calculated during slePortStatsAvgInterval seconds. Unit: bytes per second " ::= { slePortStatisticsAverageEntry 8 } slePortStatsAvgRxUcastPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of downstream unicast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second " ::= { slePortStatisticsAverageEntry 9 } slePortStatsAvgRxMcastPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of downstream multicast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second " ::= { slePortStatisticsAverageEntry 10 } slePortStatsAvgRxBcastPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average statistics of downstream broadcast traffic calculated during slePortStatsAvgInterval seconds. Unit: packets per second " ::= { slePortStatisticsAverageEntry 11 } slePortStatisticsAccTable OBJECT-TYPE SYNTAX SEQUENCE OF SlePortStatisticsAccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { slePortStatistics 5 } slePortStatisticsAccEntry OBJECT-TYPE SYNTAX SlePortStatisticsAccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { slePortStatisticsAccHCIndex } ::= { slePortStatisticsAccTable 1 } SlePortStatisticsAccEntry ::= SEQUENCE { slePortStatisticsAccHCIndex InterfaceIndex, slePortStatisticsAccHCInUnicastPkts Counter64, slePortStatisticsAccHCInMulticastPkts Counter64, slePortStatisticsAccHCInBroadcastPkts Counter64, slePortStatisticsAccHCOutUnicastPkts Counter64, slePortStatisticsAccHCOutMulticastPkts Counter64, slePortStatisticsAccHCOutBroadcastPkts Counter64, slePortStatisticsAccHCInOctets Counter64, slePortStatisticsAccHCOutOctets Counter64, slePortStatisticsAccHCOutVlanTagPkts Counter64, slePortStatisticsAccHCInPauseFrame Counter64, slePortStatisticsAccHCOutPauseFrame Counter64, slePortStatisticsAccHCIpFwDatagrams Counter64, slePortStatisticsAccHCIpInReceives Counter64, slePortStatisticsAccHCInDiscardsPkts Counter64, slePortStatisticsAccHCOutDiscardsPkts Counter64, slePortStatisticsAccHCInErrorsPkts Counter64, slePortStatisticsAccHCOutErrorsPkts Counter64 } slePortStatisticsAccHCIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "ifIndx" ::= { slePortStatisticsAccEntry 1 } slePortStatisticsAccHCInUnicastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx unicast packet counter" ::= { slePortStatisticsAccEntry 2 } slePortStatisticsAccHCInMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx multicast packet counter" ::= { slePortStatisticsAccEntry 3 } slePortStatisticsAccHCInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx broadcast packet counter" ::= { slePortStatisticsAccEntry 4 } slePortStatisticsAccHCOutUnicastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx unicast packet counter" ::= { slePortStatisticsAccEntry 5 } slePortStatisticsAccHCOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx multicast packet counter" ::= { slePortStatisticsAccEntry 6 } slePortStatisticsAccHCOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx broadcast packet counter" ::= { slePortStatisticsAccEntry 7 } slePortStatisticsAccHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx bytes" ::= { slePortStatisticsAccEntry 8 } slePortStatisticsAccHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx bytes" ::= { slePortStatisticsAccEntry 9 } slePortStatisticsAccHCOutVlanTagPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx VLAN tag counter" ::= { slePortStatisticsAccEntry 10 } slePortStatisticsAccHCInPauseFrame OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "IfInPauseFrame " ::= { slePortStatisticsAccEntry 11 } slePortStatisticsAccHCOutPauseFrame OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "IfOutPauseFrame " ::= { slePortStatisticsAccEntry 12 } slePortStatisticsAccHCIpFwDatagrams OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "IpFwDatagrams " ::= { slePortStatisticsAccEntry 13 } slePortStatisticsAccHCIpInReceives OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "IpInReceives " ::= { slePortStatisticsAccEntry 14 } slePortStatisticsAccHCInDiscardsPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx discards packet counter" ::= { slePortStatisticsAccEntry 15 } slePortStatisticsAccHCOutDiscardsPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx discards packet counter" ::= { slePortStatisticsAccEntry 16 } slePortStatisticsAccHCInErrorsPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx errors packet counter" ::= { slePortStatisticsAccEntry 17 } slePortStatisticsAccHCOutErrorsPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx errors packet counter" ::= { slePortStatisticsAccEntry 18 } slePortStatisticsPacketPerQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF SlePortStatisticsPacketPerQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "slePortStatisticsPacketPerQueueTable" ::= { slePortStatistics 6 } slePortStatisticsPacketPerQueueEntry OBJECT-TYPE SYNTAX SlePortStatisticsPacketPerQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: slePortStatisticsPPQPortNum, slePortStatisticsPPQQueueNumber" INDEX { slePortStatisticsPPQPortNum, slePortStatisticsPPQQueueNumber } ::= { slePortStatisticsPacketPerQueueTable 1 } SlePortStatisticsPacketPerQueueEntry ::= SEQUENCE { slePortStatisticsPPQPortNum INTEGER, slePortStatisticsPPQQueueNumber INTEGER, slePortStatisticsPPQPacketPassedCount Counter64, slePortStatisticsPPQOctetPassedCount Counter64, slePortStatisticsPPQPacketDiscards Counter64, slePortStatisticsPPQOctetDiscard Counter64, slePortStatisticsPPQPacketNonUnicastDiscards Counter64, slePortStatisticsPPQOctetNonUnicastDiscards Counter64, slePortStatisticsPPQPacketUnicastDiscards Counter64, slePortStatisticsPPQOctetUnicastDiscards Counter64, slePortStatisticsPPQPktEnqueued Counter64, slePortStatisticsPPQOctEnqueued Counter64 } slePortStatisticsPPQPortNum OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The Physical port index." ::= { slePortStatisticsPacketPerQueueEntry 1 } slePortStatisticsPPQQueueNumber OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The Queue number (0~7)" ::= { slePortStatisticsPacketPerQueueEntry 2 } slePortStatisticsPPQPacketPassedCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Packet Passed count." ::= { slePortStatisticsPacketPerQueueEntry 3 } slePortStatisticsPPQOctetPassedCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Packet Passed count expressed by bytes." ::= { slePortStatisticsPacketPerQueueEntry 4 } slePortStatisticsPPQPacketDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Packet discards count." ::= { slePortStatisticsPacketPerQueueEntry 5 } slePortStatisticsPPQOctetDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Packet discards expressed by bytes." ::= { slePortStatisticsPacketPerQueueEntry 6 } slePortStatisticsPPQPacketNonUnicastDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Statistic of non-unicast packet dropped by queue (Unit: packet)" ::= { slePortStatisticsPacketPerQueueEntry 7 } slePortStatisticsPPQOctetNonUnicastDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Statistic of non-unicast packet dropped by queue (Unit: octet)" ::= { slePortStatisticsPacketPerQueueEntry 8 } slePortStatisticsPPQPacketUnicastDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Statistic of Unicast packet dropped by queue (Unit: packet)" ::= { slePortStatisticsPacketPerQueueEntry 9 } slePortStatisticsPPQOctetUnicastDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Statistic of Unicast packet dropped by queue (Unit: octet)" ::= { slePortStatisticsPacketPerQueueEntry 10 } slePortStatisticsPPQPktEnqueued OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "current queuing packets" ::= { slePortStatisticsPacketPerQueueEntry 11 } slePortStatisticsPPQOctEnqueued OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "current queuing packets" ::= { slePortStatisticsPacketPerQueueEntry 12 } slePortStatisticsPacketPerQueueControl OBJECT IDENTIFIER ::= { slePortStatistics 7 } slePortStatisticsPPQControlReqest OBJECT-TYPE SYNTAX INTEGER { clearPortStatisticsPPQDropCounter(1), clearPPQStatQueue(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command 1. clearPortStatisticsPPQDropCounter" ::= { slePortStatisticsPacketPerQueueControl 1 } slePortStatisticsPPQControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { slePortStatisticsPacketPerQueueControl 2 } slePortStatisticsPPQControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { slePortStatisticsPacketPerQueueControl 3 } slePortStatisticsPPQControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)" ::= { slePortStatisticsPacketPerQueueControl 4 } slePortStatisticsPPQControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { slePortStatisticsPacketPerQueueControl 5 } slePortStatisticsPPQControlPortNum OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number that user wants to clear" ::= { slePortStatisticsPacketPerQueueControl 6 } slePortStatisticsPPQControlQueueNumber OBJECT-TYPE SYNTAX INTEGER { queue0(0), queue1(1), queue2(2), queue3(3), queue4(4), queue5(5), queue6(6), queue7(7), allQueue(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select queue that user wants to clear: 0. Queue 0 1. Queue 1 2. Queue 2 3. Queue 3 4. Queue 4 5. Queue 5 6. Queue 6 7. Queue 7 255. All queue" ::= { slePortStatisticsPacketPerQueueControl 7 } slePortStatisticsPPQControlPacketType OBJECT-TYPE SYNTAX INTEGER { nonUnicast(1), unicast(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Choose type of packet: 1. Non-unicast 2. Unicast" ::= { slePortStatisticsPacketPerQueueControl 8 } sleCpuStatistics OBJECT IDENTIFIER ::= { slePerformanceMgmt 4 } sleCpuIntervalStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SleCpuIntervalStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleCpuStatistics 1 } sleCpuIntervalStatisticsEntry OBJECT-TYPE SYNTAX SleCpuIntervalStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleCpuIntvlStatsPortIndex, sleCpuIntvlStatsInterval, sleCpuIntvlStatsOrder } ::= { sleCpuIntervalStatisticsTable 1 } SleCpuIntervalStatisticsEntry ::= SEQUENCE { sleCpuIntvlStatsPortIndex InterfaceIndex, sleCpuIntvlStatsInterval INTEGER, sleCpuIntvlStatsOrder INTEGER, sleCpuIntvlStatsTxUcastPkts Counter64, sleCpuIntvlStatsTxMcastPkts Counter64, sleCpuIntvlStatsTxBcastPkts Counter64, sleCpuIntvlStatsTxUcastBytes Counter64, sleCpuIntvlStatsTxMcastBytes Counter64, sleCpuIntvlStatsTxBcastBytes Counter64, sleCpuIntvlStatsRxUcastPkts Counter64, sleCpuIntvlStatsRxMcastPkts Counter64, sleCpuIntvlStatsRxBcastPkts Counter64, sleCpuIntvlStatsRxUcastBytes Counter64, sleCpuIntvlStatsRxMcastBytes Counter64, sleCpuIntvlStatsRxBcastBytes Counter64 } sleCpuIntvlStatsPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Port index of EthernetPort, only valid for physical ports." ::= { sleCpuIntervalStatisticsEntry 1 } sleCpuIntvlStatsInterval OBJECT-TYPE SYNTAX INTEGER { fiveSeconds(1), oneMinute(2), tenMinute(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Interval time of counters (unit: seconds)" ::= { sleCpuIntervalStatisticsEntry 2 } sleCpuIntvlStatsOrder OBJECT-TYPE SYNTAX INTEGER (0..95) MAX-ACCESS read-only STATUS current DESCRIPTION "History sequence of counters (0: current) (support only 0) " ::= { sleCpuIntervalStatisticsEntry 3 } sleCpuIntvlStatsTxUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the txUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 4 } sleCpuIntvlStatsTxMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the txMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval" ::= { sleCpuIntervalStatisticsEntry 5 } sleCpuIntvlStatsTxBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the txBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 6 } sleCpuIntvlStatsTxUcastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the txUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 7 } sleCpuIntvlStatsTxMcastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the txMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 8 } sleCpuIntvlStatsTxBcastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the txBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 9 } sleCpuIntvlStatsRxUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the rxUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 10 } sleCpuIntvlStatsRxMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the rxMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 11 } sleCpuIntvlStatsRxBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the rxBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Packets/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 12 } sleCpuIntvlStatsRxUcastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the rxUnicast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 13 } sleCpuIntvlStatsRxMcastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the rxMulticast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 14 } sleCpuIntvlStatsRxBcastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Average value of the rxBroadcast that have been transmitted to CPU during sleCpuIntvlStatsInterval Unit: Bytes/ sleCpuIntvlStatsInterval " ::= { sleCpuIntervalStatisticsEntry 15 } sleCpuStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SleCpuStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleCpuStatistics 2 } sleCpuStatisticsEntry OBJECT-TYPE SYNTAX SleCpuStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleCpuStatsPortIndex } ::= { sleCpuStatisticsTable 1 } SleCpuStatisticsEntry ::= SEQUENCE { sleCpuStatsPortIndex InterfaceIndex, sleCpuStatsTxUcastPkts Counter64, sleCpuStatsTxMcastPkts Counter64, sleCpuStatsTxBcastPkts Counter64, sleCpuStatsTxUcastBytes Counter64, sleCpuStatsTxMcastBytes Counter64, sleCpuStatsTxBcastBytes Counter64, sleCpuStatsRxUcastPkts Counter64, sleCpuStatsRxMcastPkts Counter64, sleCpuStatsRxBcastPkts Counter64, sleCpuStatsRxUcastBytes Counter64, sleCpuStatsRxMcastBytes Counter64, sleCpuStatsRxBcastBytes Counter64 } sleCpuStatsPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Port index of EthernetPort, only valid for physical ports." ::= { sleCpuStatisticsEntry 1 } sleCpuStatsTxUcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the txUnicast that have been transmitted to CPU Unit : Packets " ::= { sleCpuStatisticsEntry 2 } sleCpuStatsTxMcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the txMulticast that have been transmitted to CPU Unit : Packets " ::= { sleCpuStatisticsEntry 3 } sleCpuStatsTxBcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the txBroadcast that have been transmitted to CPU Unit : Packets " ::= { sleCpuStatisticsEntry 4 } sleCpuStatsTxUcastBytes OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the txUnicast that have been transmitted to CPU Unit : Bytes " ::= { sleCpuStatisticsEntry 5 } sleCpuStatsTxMcastBytes OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the txMulticast that have been transmitted to CPU Unit : Bytes " ::= { sleCpuStatisticsEntry 6 } sleCpuStatsTxBcastBytes OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the txBroadcast that have been transmitted to CPU Unit : Bytes " ::= { sleCpuStatisticsEntry 7 } sleCpuStatsRxUcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the rxUnicast that have been transmitted to CPU Unit : Packets " ::= { sleCpuStatisticsEntry 8 } sleCpuStatsRxMcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the rxMulticast that have been transmitted to CPU Unit : Packets " ::= { sleCpuStatisticsEntry 9 } sleCpuStatsRxBcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the rxBroadcast that have been transmitted to CPU Unit : Packets " ::= { sleCpuStatisticsEntry 10 } sleCpuStatsRxUcastBytes OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the rxUnicast that have been transmitted to CPU Unit : Bytes " ::= { sleCpuStatisticsEntry 11 } sleCpuStatsRxMcastBytes OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the rxMulticast that have been transmitted to CPU Unit : Bytes " ::= { sleCpuStatisticsEntry 12 } sleCpuStatsRxBcastBytes OBJECT-TYPE SYNTAX Counter64 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Total value of the trMulticast that have been transmitted to CPU Unit : Bytes " ::= { sleCpuStatisticsEntry 13 } sleCpuStatisticsControl OBJECT IDENTIFIER ::= { sleCpuStatistics 3 } sleCpuStatsControlReqest OBJECT-TYPE SYNTAX INTEGER { clearCpuStatistics(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleCpuStatisticsControl 1 } sleCpuStatsControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleCpuStatisticsControl 2 } sleCpuStatsControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleCpuStatisticsControl 3 } sleCpuStatsControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleCpuStatisticsControl 4 } sleCpuStatsControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleCpuStatisticsControl 5 } sleCpuStatsControlIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleCpuStatisticsControl 6 } sleCpuStatisticsNotification OBJECT IDENTIFIER ::= { sleCpuStatistics 4 } sleCpuStatisticsCleared NOTIFICATION-TYPE OBJECTS { sleCpuStatsControlReqest, sleCpuStatsControlTimeStamp, sleCpuStatsControlReqResult, sleCpuStatsPortIndex } STATUS current DESCRIPTION "Description." ::= { sleCpuStatisticsNotification 1 } slePerformanceBase OBJECT IDENTIFIER ::= { slePerformanceMgmt 5 } slePerformanceBaseInfo OBJECT IDENTIFIER ::= { slePerformanceBase 1 } slePerformanceBaseProtoStatsEnable OBJECT-TYPE SYNTAX BITS { arp(0), ip(1), icmp(2), tcp(3), udp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The admin status of gathering each protocol statistics " ::= { slePerformanceBaseInfo 1 } slePerformanceBaseCpuPpsStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Cpu PPS status." ::= { slePerformanceBaseInfo 2 } slePerformanceBaseCpuPpsThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU PPS threshold." ::= { slePerformanceBaseInfo 3 } slePerformanceBaseCpuPpsAvg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU PPS average." ::= { slePerformanceBaseInfo 4 } slePerformanceBaseControl OBJECT IDENTIFIER ::= { slePerformanceBase 2 } slePerformanceBaseControlRequest OBJECT-TYPE SYNTAX INTEGER { setProtocolStatsEnable(1), setPsetCpuPpsProfile(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePerformanceBaseControl 1 } slePerformanceBaseControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePerformanceBaseControl 2 } slePerformanceBaseControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePerformanceBaseControl 3 } slePerformanceBaseControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePerformanceBaseControl 4 } slePerformanceBaseControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePerformanceBaseControl 5 } slePerformanceBaseControlProtoStatsEnable OBJECT-TYPE SYNTAX BITS { arp(0), ip(1), icmp(2), tcp(3), udp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The admin status of gathering each protocol statistics" ::= { slePerformanceBaseControl 6 } slePerformanceBaseControlCpuPpsStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Cpu PPS status." ::= { slePerformanceBaseControl 7 } slePerformanceBaseControlCpuPpsThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The CPU PPS threshold." ::= { slePerformanceBaseControl 8 } slePerformanceBaseNotification OBJECT IDENTIFIER ::= { slePerformanceBase 3 } slePerformanceBaseProtoStatsChanged NOTIFICATION-TYPE OBJECTS { slePerformanceBaseControlRequest, slePerformanceBaseControlTimeStamp, slePerformanceBaseControlReqResult, slePerformanceBaseControlProtoStatsEnable } STATUS current DESCRIPTION "Description." ::= { slePerformanceBaseNotification 1 } slePerformanceBaseCpuPpsProfileChanged NOTIFICATION-TYPE OBJECTS { slePerformanceBaseControlRequest, slePerformanceBaseControlTimeStamp, slePerformanceBaseControlReqResult, slePerformanceBaseControlCpuPpsStatus, slePerformanceBaseControlCpuPpsThreshold } STATUS current DESCRIPTION "setPsetCpuPpsProfile" ::= { slePerformanceBaseNotification 2 } -- Node definitions -- -- 1.3.6.1.4.1.6296.101.5.6 sleSfpmonThreshold OBJECT IDENTIFIER ::= { slePerformanceMgmt 6 } -- 1.3.6.1.4.1.6296.101.5.6.1 sleSfpmonThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF sleSfpmonThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleSfpmonThreshold 1 } -- 1.3.6.1.4.1.6296.101.5.6.1.1 sleSfpmonThresholdEntry OBJECT-TYPE SYNTAX sleSfpmonThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleSfpmonThresholdIndex } ::= { sleSfpmonThresholdTable 1 } sleSfpmonThresholdEntry ::= SEQUENCE { sleSfpmonThresholdIndex INTEGER, sleSfpmonWarnTxPowerLow Integer32, sleSfpmonWarnTxPowerHigh Integer32, sleSfpmonWarnTxPowerDuration INTEGER, sleSfpmonWarnRxPowerLow Integer32, sleSfpmonWarnRxPowerHigh Integer32, sleSfpmonWarnRxPowerDuration INTEGER, sleSfpmonAlarmTxPowerLow Integer32, sleSfpmonAlarmTxPowerHigh Integer32, sleSfpmonAlarmTxPowerDuration INTEGER, sleSfpmonAlarmRxPowerLow Integer32, sleSfpmonAlarmRxPowerHigh Integer32, sleSfpmonAlarmRxPowerDuration INTEGER, sleSfpmonWarnTxbiasLow Integer32, sleSfpmonWarnTxbiasHigh Integer32, sleSfpmonAlarmTxbiasLow Integer32, sleSfpmonAlarmTxbiasHigh Integer32, sleSfpmonWarnTemperLow Integer32, sleSfpmonWarnTemperHigh Integer32, sleSfpmonAlarmTemperLow Integer32, sleSfpmonAlarmTemperHigh Integer32, sleSfpmonWarnVoltageLow Integer32, sleSfpmonWarnVoltageHigh Integer32, sleSfpmonAlarmVoltageLow Integer32, sleSfpmonAlarmVoltageHigh Integer32, sleSfpmonWarnTxPowerMode INTEGER, sleSfpmonAlarmTxPowerMode INTEGER, sleSfpmonWarnRxPowerMode INTEGER, sleSfpmonAlarmRxPowerMode INTEGER, sleSfpmonWarnTxbiasMode INTEGER, sleSfpmonAlarmTxbiasMode INTEGER, sleSfpmonWarnTemperMode INTEGER, sleSfpmonAlarmTemperMode INTEGER, sleSfpmonWarnVoltageMode INTEGER, sleSfpmonAlarmVoltageMode INTEGER } -- 1.3.6.1.4.1.6296.101.5.6.1.1.1 sleSfpmonThresholdIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "port index." ::= { sleSfpmonThresholdEntry 1 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.2 sleSfpmonWarnTxPowerLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power threshold -40~8,1647 (dBm) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 2 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.3 sleSfpmonWarnTxPowerHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power threshold -40~8,1647 (dBm) It must be devided by 10000." ::= { sleSfpmonThresholdEntry 3 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.4 sleSfpmonWarnTxPowerDuration OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Duration-time units by the 10 sec" ::= { sleSfpmonThresholdEntry 4 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.5 sleSfpmonWarnRxPowerLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power threshold -40~8,1647 (dBm) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 5 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.6 sleSfpmonWarnRxPowerHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power threshold -40~8,1647 (dBm) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 6 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.7 sleSfpmonWarnRxPowerDuration OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Duration-time units by the 10 sec" ::= { sleSfpmonThresholdEntry 7 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.8 sleSfpmonAlarmTxPowerLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power threshold -40~8,1647 (dBm) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 8 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.9 sleSfpmonAlarmTxPowerHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power threshold -40~8,1647 (dBm) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 9 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.10 sleSfpmonAlarmTxPowerDuration OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Duration-time units by the 10 sec" ::= { sleSfpmonThresholdEntry 10 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.11 sleSfpmonAlarmRxPowerLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power threshold -40~8,1647 (dBm) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 11 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.12 sleSfpmonAlarmRxPowerHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Power threshold -40~8,1647 (dBm) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 12 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.13 sleSfpmonAlarmRxPowerDuration OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Duration-time units by the 10 sec" ::= { sleSfpmonThresholdEntry 13 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.13 sleSfpmonWarnTxbiasLow OBJECT-TYPE SYNTAX Integer32 (0..131) MAX-ACCESS read-only STATUS current DESCRIPTION "The Txbias Threshold 0~131(mA) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 14 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.13 sleSfpmonWarnTxbiasHigh OBJECT-TYPE SYNTAX Integer32 (0..131) MAX-ACCESS read-only STATUS current DESCRIPTION "The Txbias Threshold 0~131(mA) It must be devided by 10000." ::= { sleSfpmonThresholdEntry 15 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.13 sleSfpmonAlarmTxbiasLow OBJECT-TYPE SYNTAX Integer32 (0..131) MAX-ACCESS read-only STATUS current DESCRIPTION "The Txbias Threshold 0~131(mA) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 16 } -- 1.3.6.1.4.1.6296.101.5.6.1.1.13 sleSfpmonAlarmTxbiasHigh OBJECT-TYPE SYNTAX Integer32 (0..131) MAX-ACCESS read-only STATUS current DESCRIPTION "The Txbias Threshold 0~131(mA) It must be devided by 10000. " ::= { sleSfpmonThresholdEntry 17 } sleSfpmonWarnTemperLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Temperature threshold -128~127.99(C) It must be devided by 10000." ::= { sleSfpmonThresholdEntry 18 } sleSfpmonWarnTemperHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Temperature threshold -128~127.99(C) It must be devided by 10000." ::= { sleSfpmonThresholdEntry 19 } sleSfpmonAlarmTemperLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Temperature threshold -128~127.99(C) It must be devided by 10000." ::= { sleSfpmonThresholdEntry 20 } sleSfpmonAlarmTemperHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Temperature threshold -128~127.99(C) It must be devided by 10000." ::= { sleSfpmonThresholdEntry 21 } sleSfpmonWarnVoltageLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Voltage threshold 0~6.5535(V) It must be devided by 10000" ::= { sleSfpmonThresholdEntry 22 } sleSfpmonWarnVoltageHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Voltage threshold 0~6.5535(V) It must be devided by 10000" ::= { sleSfpmonThresholdEntry 23 } sleSfpmonAlarmVoltageLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Voltage threshold 0~6.5535(V) It must be devided by 10000" ::= { sleSfpmonThresholdEntry 24 } sleSfpmonAlarmVoltageHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Voltage threshold 0~6.5535(V) It must be devided by 10000" ::= { sleSfpmonThresholdEntry 25 } sleSfpmonWarnTxPowerMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold operational mode (1:on, 0:off)" ::= { sleSfpmonThresholdEntry 26 } sleSfpmonAlarmTxPowerMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold mode 0: default mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdEntry 27 } sleSfpmonWarnRxPowerMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold mode 0: default mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdEntry 28 } sleSfpmonAlarmRxPowerMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold mode 0: default mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdEntry 29 } sleSfpmonWarnTxbiasMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold mode 0: default mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdEntry 30 } sleSfpmonAlarmTxbiasMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold mode 0: default mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdEntry 31 } sleSfpmonWarnTemperMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold mode 0: default mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdEntry 32 } sleSfpmonAlarmTemperMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold mode 0: default mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdEntry 33 } sleSfpmonWarnVoltageMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold mode 0: default mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdEntry 34 } sleSfpmonAlarmVoltageMode OBJECT-TYPE SYNTAX INTEGER { default(0), admin(1), oper(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module threshold mode 0: default mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdEntry 35 } -- 1.3.6.1.4.1.6296.101.5.6.2 sleSfpmonThresholdControl OBJECT IDENTIFIER ::= { sleSfpmonThreshold 2 } -- 1.3.6.1.4.1.6296.101.5.6.2.1 sleSfpmonThresholdControlRequest OBJECT-TYPE SYNTAX INTEGER { setSfpmonThresholdWarnTxPower(1), setSfpmonThresholdWarnRxPower(2), setSfpmonThresholdAlarmTxPower(3), setSfpmonThresholdAlarmRxPower(4), clearSfpmonThresholdWarnTxPower(5), clearSfpmonThresholdWarnRxPower(6), clearSfpmonThresholdAlarmTxPower(7), clearSfpmonThresholdAlarmRxPower(8), setSfpmonThresholdWarnTxbias(9), setSfpmonThresholdAlarmTxbias(10), clearSfpmonThresholdWarnTxbias(11), clearSfpmonThresholdAlarmTxbias(12), setSfpmonThresholdWarnTemper(13), setSfpmonThresholdAlarmTemper(14), clearSfpmonThresholdWarnTemper(15), clearSfpmonThresholdAlarmTemper(16), setSfpmonThresholdWarnVoltage(17), setSfpmonThresholdAlarmVoltage(18), clearSfpmonThresholdWarnVoltage(19), clearSfpmonThresholdAlarmVoltage(20) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleSfpmonThresholdControl 1 } -- 1.3.6.1.4.1.6296.101.5.6.2.2 sleSfpmonThresholdControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleSfpmonThresholdControl 2 } -- 1.3.6.1.4.1.6296.101.5.6.2.3 sleSfpmonThresholdControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleSfpmonThresholdControl 3 } -- 1.3.6.1.4.1.6296.101.5.6.2.4 sleSfpmonThresholdControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleSfpmonThresholdControl 4 } -- 1.3.6.1.4.1.6296.101.5.6.2.5 sleSfpmonThresholdControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleSfpmonThresholdControl 5 } -- 1.3.6.1.4.1.6296.101.5.6.2.6 sleSfpmonThresholdControlIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleSfpmonThresholdControl 6 } -- 1.3.6.1.4.1.6296.101.5.6.2.7 sleSfpmonThresholdControlPowerLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Power threshold in dBm -40 ~ 8.1647 (dBm) It must be multiplied by 10000." ::= { sleSfpmonThresholdControl 7 } -- 1.3.6.1.4.1.6296.101.5.6.2.8 sleSfpmonThresholdControlPowerHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Power threshold in dBm -40 ~ 8.1647 (dBm) It must be multiplied by 10000." ::= { sleSfpmonThresholdControl 8 } -- 1.3.6.1.4.1.6296.101.5.6.2.9 sleSfpmonThresholdControlPowerDuration OBJECT-TYPE SYNTAX INTEGER (5..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Duration-time units by the 10 sec" ::= { sleSfpmonThresholdControl 9 } -- 1.3.6.1.4.1.6296.101.5.6.2.7 sleSfpmonThresholdControlTxbiasLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Txbias 0~131 (mA) It must be multiplied by 10000." ::= { sleSfpmonThresholdControl 10 } -- 1.3.6.1.4.1.6296.101.5.6.2.7 sleSfpmonThresholdControlTxbiasHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Txbias 0~131 (mA) It must be multiplied by 10000." ::= { sleSfpmonThresholdControl 11 } sleSfpmonThresholdControlTemperLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Temperature threshold 0~131 (mA) It must be multiplied by 10000." ::= { sleSfpmonThresholdControl 12 } sleSfpmonThresholdControlTemperHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Temperature threshold 0~131 (mA) It must be multiplied by 10000." ::= { sleSfpmonThresholdControl 13 } sleSfpmonThresholdControlVoltageLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The voltage threshold 0~6.5535 (V) It must be multiplied by 10000." ::= { sleSfpmonThresholdControl 14 } sleSfpmonThresholdControlVoltageHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The voltage threshold 0~6.5535 (V) It must be multiplied by 10000." ::= { sleSfpmonThresholdControl 15 } sleSfpmonThresholdControlMode OBJECT-TYPE SYNTAX INTEGER { admin(1), oper(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The module threshold mode 1: admin mode 2: operational mode" ::= { sleSfpmonThresholdControl 16 } -- 1.3.6.1.4.1.6296.101.5.6.3 sleSfpmonThresholdNotification OBJECT IDENTIFIER ::= { sleSfpmonThreshold 3 } -- 1.3.6.1.4.1.6296.101.5.6.3.1 sleSfpmonThresholdPowerChanged NOTIFICATION-TYPE OBJECTS { sleSfpmonThresholdIndex, sleSfpmonWarnTxPowerLow, sleSfpmonWarnTxPowerHigh, sleSfpmonWarnTxPowerDuration, sleSfpmonWarnRxPowerLow, sleSfpmonWarnRxPowerHigh, sleSfpmonWarnRxPowerDuration, sleSfpmonAlarmTxPowerLow, sleSfpmonAlarmTxPowerHigh, sleSfpmonAlarmTxPowerDuration, sleSfpmonAlarmRxPowerLow, sleSfpmonAlarmRxPowerHigh, sleSfpmonAlarmRxPowerDuration, sleSfpmonThresholdControlRequest, sleSfpmonThresholdControlTimeStamp, sleSfpmonThresholdControlReqResult, sleSfpmonWarnTxPowerMode, sleSfpmonAlarmTxPowerMode, sleSfpmonWarnRxPowerMode, sleSfpmonAlarmRxPowerMode } STATUS current DESCRIPTION "setSfpmonThresholdWarnTxPower setSfpmonThresholdWarnRxPower setSfpmonThresholdAlarmTxPower setSfpmonThresholdAlarmRxPower clearSfpmonThresholdWarnTxPower clearSfpmonThresholdWarnRxPower clearSfpmonThresholdAlarmTxPower clearSfpmonThresholdAlarmRxPower" ::= { sleSfpmonThresholdNotification 1 } sleSfpmonThresholdTxbiasChanged NOTIFICATION-TYPE OBJECTS { sleSfpmonThresholdControlRequest, sleSfpmonThresholdControlTimeStamp, sleSfpmonWarnTxbiasMode, sleSfpmonAlarmTxbiasMode, sleSfpmonThresholdControlReqResult, sleSfpmonThresholdIndex, sleSfpmonWarnTxbiasLow, sleSfpmonWarnTxbiasHigh, sleSfpmonAlarmTxbiasLow, sleSfpmonAlarmTxbiasHigh } STATUS current DESCRIPTION "setSfpmonThresholdWarnTxbias setSfpmonThresholdAlarmTxbias clearSfpmonThresholdWarnTxbias clearSfpmonThresholdAlarmTxbias" ::= { sleSfpmonThresholdNotification 2 } sleSfpmonThresholdTemperChanged NOTIFICATION-TYPE OBJECTS { sleSfpmonThresholdControlRequest, sleSfpmonThresholdControlTimeStamp, sleSfpmonThresholdControlReqResult, sleSfpmonThresholdIndex, sleSfpmonWarnTemperLow, sleSfpmonWarnTemperMode, sleSfpmonAlarmTemperMode, sleSfpmonAlarmTemperLow, sleSfpmonWarnTemperHigh, sleSfpmonAlarmTemperHigh } STATUS current DESCRIPTION "setSfpmonThresholdWarnTemper setSfpmonThresholdAlarmTemper clearSfpmonThresholdWarnTemper clearSfpmonThresholdAlarmTemper" ::= { sleSfpmonThresholdNotification 3 } sleSfpmonThresholdVoltageChanged NOTIFICATION-TYPE OBJECTS { sleSfpmonThresholdControlRequest, sleSfpmonThresholdControlTimeStamp, sleSfpmonThresholdControlReqResult, sleSfpmonThresholdIndex, sleSfpmonThresholdControlVoltageLow, sleSfpmonThresholdControlVoltageHigh, sleSfpmonThresholdControlMode } STATUS current DESCRIPTION "setSfpmonThresholdWarnVoltage setSfpmonThresholdAlarmVoltage clearSfpmonThresholdWarnVoltage clearSfpmonThresholdAlarmVoltage" ::= { sleSfpmonThresholdNotification 4 } sleVlanStatistics OBJECT IDENTIFIER ::= { slePerformanceMgmt 7 } sleVlanStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SleVlanStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleVlanStatistics 1 } sleVlanStatisticsEntry OBJECT-TYPE SYNTAX SleVlanStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleVlanStatisticsIndex } ::= { sleVlanStatisticsTable 1 } SleVlanStatisticsEntry ::= SEQUENCE { sleVlanStatisticsIndex Integer32, sleVlanStatisticsIngressBytes Counter64, sleVlanStatisticsEgressBytes Counter64, sleVlanStatisticsIngressPackets Counter64, sleVlanStatisticsEgressPackets Counter64 } sleVlanStatisticsIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN index." ::= { sleVlanStatisticsEntry 1 } sleVlanStatisticsIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes that ingress on the VLAN" ::= { sleVlanStatisticsEntry 2 } sleVlanStatisticsEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes that egress on the VLAN." ::= { sleVlanStatisticsEntry 3 } sleVlanStatisticsIngressPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets that ingress on the VLAN." ::= { sleVlanStatisticsEntry 4 } sleVlanStatisticsEgressPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets that egress on the VLAN." ::= { sleVlanStatisticsEntry 5 } -- 1.3.6.1.4.1.6296.101.5.6.2 sleVlanStatisticsControl OBJECT IDENTIFIER ::= { sleVlanStatistics 2 } -- 1.3.6.1.4.1.6296.101.5.6.2.1 sleVlanStatisticsControlRequest OBJECT-TYPE SYNTAX INTEGER { clearVlanStatistics(1), clearVlanStatisticsAll(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleVlanStatisticsControl 1 } -- 1.3.6.1.4.1.6296.101.5.6.2.2 sleVlanStatisticsControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleVlanStatisticsControl 2 } -- 1.3.6.1.4.1.6296.101.5.6.2.3 sleVlanStatisticsControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleVlanStatisticsControl 3 } -- 1.3.6.1.4.1.6296.101.5.6.2.4 sleVlanStatisticsControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleVlanStatisticsControl 4 } -- 1.3.6.1.4.1.6296.101.5.6.2.5 sleVlanStatisticsControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleVlanStatisticsControl 5 } -- 1.3.6.1.4.1.6296.101.5.6.2.6 sleVlanStatisticsControlIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleVlanStatisticsControl 6 } sleVlanStatisticsNotification OBJECT IDENTIFIER ::= { sleVlanStatistics 3 } sleVlanStatisticsCleared NOTIFICATION-TYPE OBJECTS { sleVlanStatisticsControlRequest, sleVlanStatisticsControlTimeStamp, sleVlanStatisticsControlReqResult, sleVlanStatisticsControlIndex } STATUS current DESCRIPTION "Clear VLAN statistics" ::= { sleVlanStatisticsNotification 1 } sleVlanStatisticsAllCleared NOTIFICATION-TYPE OBJECTS { sleVlanStatisticsControlRequest, sleVlanStatisticsControlTimeStamp, sleVlanStatisticsControlReqResult } STATUS current DESCRIPTION "Clear all VLANs statistics" ::= { sleVlanStatisticsNotification 2 } slePhyStat OBJECT IDENTIFIER ::= { slePerformanceMgmt 8 } slePhyInternalStatTable OBJECT-TYPE SYNTAX SEQUENCE OF SlePhyInternalStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { slePhyStat 1 } slePhyInternalStatEntry OBJECT-TYPE SYNTAX SlePhyInternalStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleVlanStatisticsIndex } ::= { slePhyInternalStatTable 1 } SlePhyInternalStatEntry ::= SEQUENCE { slePhyInternalStatIndex Integer32 } slePhyInternalStatIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index." ::= { slePhyInternalStatEntry 1 } slePhyExternalStatTable OBJECT-TYPE SYNTAX SEQUENCE OF SlePhyExternalStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { slePhyStat 2 } slePhyExternalStatEntry OBJECT-TYPE SYNTAX SlePhyExternalStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleVlanStatisticsIndex } ::= { slePhyExternalStatTable 1 } SlePhyExternalStatEntry ::= SEQUENCE { slePhyExternalStatIfIndex Integer32, slePhyExternalStatEtherStatsCRCAlignErrors Counter64, slePhyExternalStatRxMacDiscards Counter64, slePhyExternalStatIdleError Counter64 } slePhyExternalStatIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index." ::= { slePhyExternalStatEntry 1 } slePhyExternalStatEtherStatsCRCAlignErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ether Stats CRC Align Errors" ::= { slePhyExternalStatEntry 35 } slePhyExternalStatRxMacDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx Mac Discards" ::= { slePhyExternalStatEntry 49 } slePhyExternalStatIdleError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Idle Error" ::= { slePhyExternalStatEntry 50 } -- 1.3.6.1.4.1.6296.101.5.6.2 slePhyStatControl OBJECT IDENTIFIER ::= { slePhyStat 3 } -- 1.3.6.1.4.1.6296.101.5.6.2.1 slePhyStatControlRequest OBJECT-TYPE SYNTAX INTEGER { clearPhyStats(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePhyStatControl 1 } -- 1.3.6.1.4.1.6296.101.5.6.2.2 slePhyStatControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePhyStatControl 2 } -- 1.3.6.1.4.1.6296.101.5.6.2.3 slePhyStatControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePhyStatControl 3 } -- 1.3.6.1.4.1.6296.101.5.6.2.4 slePhyStatControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePhyStatControl 4 } -- 1.3.6.1.4.1.6296.101.5.6.2.5 slePhyStatControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePhyStatControl 5 } -- 1.3.6.1.4.1.6296.101.5.6.2.6 slePhyStatControlIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The interface index." ::= { slePhyStatControl 6 } slePerformanceMgmtGroup OBJECT-GROUP OBJECTS { sleThresholdIndex, slePortThresholdUpLimit, slePortThresholdUpSamplingInterval, slePortThresholdDownLimit, slePortThresholdDownSamplingInterval, slePortThresholdBlockTimer, slePortThresholdPpsCurrLimit, slePortThresholdPpsBlocked, slePortThresholdPpsLimit, slePortThresholdPpsInterval, slePortThresholdPpsBlockTimer, slePortThresholdControlRequest, slePortThresholdControlStatus, slePortThresholdControlTimer, slePortThresholdControlTimeStamp, slePortThresholdControlReqResult, slePortThresholdControlIndex, slePortThresholdControlThresholdUpLimit, slePortThresholdControlUpSamplingInterval, slePortThresholdControlThresholdDownLimit, slePortThresholdControlDownSamplingInterval, slePortThresholdControlBlockTimer, slePortThresholdControlPpsLimit, slePortThresholdControlPpsInterval, slePortThresholdControlPpsBlockTimer, slePortRateInterfaceIndex, slePortRateIngressRate, slePortRateEgressRate, slePortRateControlReqest, slePortRateControlStatus, slePortRateControlTimer, slePortRateControlTimeStamp, slePortRateControlReqResult, slePortRateControlInterfaceIndex, slePortRateControlIngressRate, slePortRateControlEgressRate, slePortStatsIndex, slePortStatsInterval, slePortStatsOrder, slePortStatsUpPackets, slePortStatsUpBytes, slePortStatsDownPackets, slePortStatsDownBytes, slePortStatsControlRequest, slePortStatsControlStatus, slePortStatsControlTimer, slePortStatsControlTimeStamp, slePortStatsControlReqResult, slePortStatsControlIndex, sleCpuIntvlStatsPortIndex, sleCpuIntvlStatsInterval, sleCpuIntvlStatsOrder, sleCpuIntvlStatsTxUcastPkts, sleCpuIntvlStatsTxMcastPkts, sleCpuIntvlStatsTxBcastPkts, sleCpuIntvlStatsTxUcastBytes, sleCpuIntvlStatsTxMcastBytes, sleCpuIntvlStatsTxBcastBytes, sleCpuIntvlStatsRxUcastPkts, sleCpuIntvlStatsRxMcastPkts, sleCpuIntvlStatsRxBcastPkts, sleCpuIntvlStatsRxUcastBytes, sleCpuIntvlStatsRxMcastBytes, sleCpuIntvlStatsRxBcastBytes, sleCpuStatsPortIndex, sleCpuStatsTxUcastPkts, sleCpuStatsTxMcastPkts, sleCpuStatsTxBcastPkts, sleCpuStatsTxUcastBytes, sleCpuStatsTxMcastBytes, sleCpuStatsTxBcastBytes, sleCpuStatsRxUcastPkts, sleCpuStatsRxMcastPkts, sleCpuStatsRxBcastPkts, sleCpuStatsRxUcastBytes, sleCpuStatsRxMcastBytes, sleCpuStatsRxBcastBytes, sleCpuStatsControlReqest, sleCpuStatsControlStatus, sleCpuStatsControlTimer, sleCpuStatsControlTimeStamp, sleCpuStatsControlReqResult, slePortStatsAvgRxPackets, slePortStatsAvgRxBytes, slePortStatsAvgRxUcastPackets, slePortStatsAvgRxMcastPackets, slePortStatsAvgRxBcastPackets, slePortStatsAvgTxPackets, slePortStatsAvgTxBytes, slePortStatsAvgTxUcastPackets, slePortStatsAvgTxMcastPackets, slePortStatsAvgTxBcastPackets, slePortStatisticsAccHCInUnicastPkts, slePortStatisticsAccHCInMulticastPkts, slePortStatisticsAccHCOutUnicastPkts, slePortStatisticsAccHCOutMulticastPkts, slePortStatisticsAccHCOutBroadcastPkts, slePortStatisticsAccHCInOctets, slePortStatisticsAccHCOutOctets, slePortStatisticsAccHCOutVlanTagPkts, slePortStatisticsPPQPortNum, slePortStatisticsPPQQueueNumber, slePortStatisticsPPQPacketPassedCount, slePortStatisticsPPQOctetPassedCount, slePortStatisticsPPQPacketDiscards, slePortStatisticsPPQOctetDiscard, slePortThresholdWarnTxLimit, slePortThresholdWarnTxInterval, slePortThresholdWarnTxDuration, slePortThresholdWarnRxLimit, slePortThresholdWarnRxInterval, slePortThresholdWarnRxDuration, slePortThresholdAlarmTxLimit, slePortThresholdAlarmTxInterval, slePortThresholdAlarmTxDuration, slePortThresholdAlarmRxLimit, slePortThresholdAlarmRxInterval, slePortThresholdAlarmRxDuration, slePortThresholdControlThresholdLimit, slePortThresholdControlSamplingInterval, slePortThresholdControlSamplingDuration, sleSfpmonThresholdIndex, sleSfpmonWarnTxPowerLow, sleSfpmonWarnTxPowerHigh, sleSfpmonWarnTxPowerDuration, sleSfpmonWarnRxPowerLow, sleSfpmonWarnRxPowerHigh, sleSfpmonWarnRxPowerDuration, sleSfpmonAlarmTxPowerLow, sleSfpmonAlarmTxPowerHigh, sleSfpmonAlarmTxPowerDuration, sleSfpmonAlarmRxPowerLow, sleSfpmonAlarmRxPowerHigh, sleSfpmonAlarmRxPowerDuration, sleSfpmonThresholdControlRequest, sleSfpmonThresholdControlStatus, sleSfpmonThresholdControlTimer, sleSfpmonThresholdControlTimeStamp, sleSfpmonThresholdControlReqResult, sleSfpmonThresholdControlIndex, sleSfpmonThresholdControlPowerLow, sleSfpmonThresholdControlPowerHigh, sleSfpmonThresholdControlPowerDuration, sleSfpmonWarnTxbiasLow, sleSfpmonWarnTxbiasHigh, sleSfpmonAlarmTxbiasLow, sleSfpmonAlarmTxbiasHigh, sleSfpmonWarnTemperLow, sleSfpmonWarnTemperHigh, sleSfpmonAlarmTemperLow, sleSfpmonAlarmTemperHigh, sleSfpmonThresholdControlTxbiasLow, sleSfpmonThresholdControlTxbiasHigh, sleSfpmonThresholdControlTemperLow, sleSfpmonThresholdControlTemperHigh, sleSfpmonThresholdControlVoltageLow, sleSfpmonThresholdControlVoltageHigh, slePerformanceBaseCpuPpsStatus, slePerformanceBaseCpuPpsThreshold, slePerformanceBaseCpuPpsAvg, slePerformanceBaseControlCpuPpsStatus, slePerformanceBaseControlCpuPpsThreshold, sleVlanStatisticsIndex, sleVlanStatisticsIngressBytes, sleVlanStatisticsEgressBytes, sleVlanStatisticsIngressPackets, sleVlanStatisticsEgressPackets, sleVlanStatisticsControlRequest, sleVlanStatisticsControlStatus, sleVlanStatisticsControlTimer, sleVlanStatisticsControlTimeStamp, sleVlanStatisticsControlReqResult, sleVlanStatisticsControlIndex, slePortStatisticsAccHCInPauseFrame, slePortStatisticsAccHCOutPauseFrame, slePortStatisticsAccHCIpFwDatagrams, slePortStatisticsAccHCIpInReceives, slePortStatisticsPPQPacketNonUnicastDiscards, slePortStatisticsPPQOctetNonUnicastDiscards, slePortStatisticsPPQPacketUnicastDiscards, slePortStatisticsPPQOctetUnicastDiscards, slePortStatisticsPPQControlReqest, slePortStatisticsPPQControlStatus, slePortStatisticsPPQControlTimer, slePortStatisticsPPQControlTimeStamp, slePortStatisticsPPQControlReqResult, slePortStatisticsPPQControlPortNum, slePortStatisticsPPQControlQueueNumber, slePortStatisticsPPQControlPacketType, slePortRateIngressRateType, slePortRateControlIngressRateType, slePhyInternalStatIndex, slePhyExternalStatIfIndex, slePhyExternalStatEtherStatsCRCAlignErrors, slePhyExternalStatRxMacDiscards, slePhyExternalStatIdleError, slePhyStatControlRequest, slePhyStatControlStatus, slePhyStatControlTimer, slePhyStatControlTimeStamp, slePhyStatControlReqResult, slePhyStatControlIfIndex, slePortStatisticsAccHCInDiscardsPkts, slePortStatisticsAccHCOutDiscardsPkts, slePortStatisticsAccHCInErrorsPkts, slePortStatisticsAccHCOutErrorsPkts, slePortStatisticsPPQPktEnqueued, slePortStatisticsPPQOctEnqueued, sleCpuStatsControlIndex, slePortRateEnhanced, slePortRateControlEnhanced, slePortStatsAvgInterval, slePortStatisticsAccHCIndex, slePortStatisticsAccHCInBroadcastPkts, slePerformanceBaseProtoStatsEnable, slePerformanceBaseControlRequest, slePerformanceBaseControlStatus, slePerformanceBaseControlTimer, slePerformanceBaseControlTimeStamp, slePerformanceBaseControlReqResult, slePerformanceBaseControlProtoStatsEnable, sleSfpmonWarnVoltageLow, sleSfpmonWarnVoltageHigh, sleSfpmonAlarmVoltageLow, sleSfpmonAlarmVoltageHigh, sleSfpmonWarnTxPowerMode, sleSfpmonAlarmTxPowerMode, sleSfpmonWarnRxPowerMode, sleSfpmonAlarmRxPowerMode, sleSfpmonWarnTxbiasMode, sleSfpmonAlarmTxbiasMode, sleSfpmonWarnTemperMode, sleSfpmonAlarmTemperMode, sleSfpmonWarnVoltageMode, sleSfpmonAlarmVoltageMode, sleSfpmonThresholdControlMode } STATUS current DESCRIPTION "Description." ::= { slePerformanceMgmt 9 } slePerformancdMgmtNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { slePortThresholdChanged, slePortThresholdBlockProfileChanged, slePortThresholdPPSProfileChanged, slePortThresholdPPSBlockProfileChanged, slePortStatisticsCleared, slePerformanceBaseProtoStatsChanged, slePortStatisticsAllCleared, sleCpuStatisticsCleared, sleSfpmonThresholdTxbiasChanged, sleSfpmonThresholdTemperChanged, sleSfpmonThresholdVoltageChanged, slePerformanceBaseCpuPpsProfileChanged, sleVlanStatisticsCleared, sleVlanStatisticsAllCleared, slePortRateEnhancedChanged, slePortRateProfileChanged, sleSfpmonThresholdPowerChanged } STATUS current DESCRIPTION "Description." ::= { slePerformanceMgmt 10 } END -- -- sle-performancemgmt-mib.mib --