-- -- sle-qos-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Monday, April 18, 2011 at 12:24:04 -- SLE-QOS-MIB DEFINITIONS ::= BEGIN IMPORTS sleMgmt FROM DASAN-SMI SleControlRequestResultType, SleControlStatusType FROM SLE-TC-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Unsigned32, Gauge32, Counter32, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI; -- 2 -- December 09, 2004 at 17:33 GMT -- 1.3.6.1.4.1.6296.101.10 sleQoS MODULE-IDENTITY LAST-UPDATED "200412091733Z" -- December 09, 2004 at 17:33 GMT ORGANIZATION "Hanasoft." CONTACT-INFO "Contact-info." DESCRIPTION "Description." ::= { sleMgmt 10 } -- -- Type definitions -- -- Type definitions -- SleTrafficProfileControlRequestType ::= INTEGER { setTrafficProfile(1) } SleUserFlowMatchType ::= BITS { ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufDscp(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16) } SleUserFlowActionType ::= BITS { ufActPermit(0), ufActCopyCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4) } SleBooleanType ::= INTEGER { disable(0), enable(1) } SlePortScheduleControlRequestType ::= INTEGER { setPortScheduleMode(1) } SleQueueControlRequestType ::= INTEGER { setQueueProfile(1) } SleUserFlowControlRequestType ::= INTEGER { createUserFlow(1), destroyUserFlow(2), setUserFlowClassifierProfile(3), setUserFlowMatchActionProfile(4), setUserFlowNomatchActionProfile(5) } -- -- Node definitions -- -- Node definitions -- -- 2.2 -- 1.3.6.1.4.1.6296.101.10.1 sleQoSBase OBJECT IDENTIFIER ::= { sleQoS 1 } -- 1.3.6.1.4.1.6296.101.10.1.1 sleQoSBaseInfo OBJECT IDENTIFIER ::= { sleQoSBase 1 } -- 2.2.1 -- 1.3.6.1.4.1.6296.101.10.1.1.1 sleQosUserFlowNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQoSBaseInfo 1 } -- 2.2.2 -- 1.3.6.1.4.1.6296.101.10.1.1.2 sleQosTrafficProfileNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQoSBaseInfo 2 } -- 1.3.6.1.4.1.6296.101.10.1.1.3 sleQosCounterNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQoSBaseInfo 3 } -- 2.2.4 -- 1.3.6.1.4.1.6296.101.10.1.1.4 sleQosQueueNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQoSBaseInfo 4 } -- 1.3.6.1.4.1.6296.101.10.1.1.5 sleQosColorMarkingProfileNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQoSBaseInfo 5 } -- 1.3.6.1.4.1.6296.101.10.1.1.6 sleQosRuleMode OBJECT-TYPE SYNTAX INTEGER { default(0), extension(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQoSBaseInfo 6 } -- 1.3.6.1.4.1.6296.101.10.1.2 sleQoSBaseControl OBJECT IDENTIFIER ::= { sleQoSBase 2 } -- 1.3.6.1.4.1.6296.101.10.1.2.1 sleQoSBaseControlRequest OBJECT-TYPE SYNTAX INTEGER { setQoSBaseRuleMode(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleQoSBaseControl 1 } -- 1.3.6.1.4.1.6296.101.10.1.2.2 sleQoSBaseControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQoSBaseControl 2 } -- 1.3.6.1.4.1.6296.101.10.1.2.3 sleQoSBaseControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleQoSBaseControl 3 } -- 1.3.6.1.4.1.6296.101.10.1.2.4 sleQoSBaseControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQoSBaseControl 4 } -- 1.3.6.1.4.1.6296.101.10.1.2.5 sleQoSBaseControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQoSBaseControl 5 } -- 1.3.6.1.4.1.6296.101.10.1.2.6 sleQoSBaseControlRuleMode OBJECT-TYPE SYNTAX INTEGER { default(0), extension(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleQoSBaseControl 6 } -- 1.3.6.1.4.1.6296.101.10.1.3 sleQoSBaseNotification OBJECT IDENTIFIER ::= { sleQoSBase 3 } -- 1.3.6.1.4.1.6296.101.10.1.3.1 sleQoSBaseRuleModeChanged NOTIFICATION-TYPE OBJECTS { sleQoSBaseControlRequest, sleQoSBaseControlTimeStamp, sleQoSBaseControlReqResult, sleQosRuleMode } STATUS current DESCRIPTION "Description." ::= { sleQoSBaseNotification 1 } -- 2.4 -- 1.3.6.1.4.1.6296.101.10.2 sleTrafficProfile OBJECT IDENTIFIER ::= { sleQoS 2 } -- 2.4.1 -- 1.3.6.1.4.1.6296.101.10.2.1 sleTrafficProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SleTrafficProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleTrafficProfile 1 } -- 2.4.1.1 -- 1.3.6.1.4.1.6296.101.10.2.1.1 sleTrafficProfileEntry OBJECT-TYPE SYNTAX SleTrafficProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleTrafficProfileIndex } ::= { sleTrafficProfileTable 1 } SleTrafficProfileEntry ::= SEQUENCE { sleTrafficProfileIndex Unsigned32, sleTrafficProfileMinBandwidth Integer32, sleTrafficProfileMaxBandwidth Integer32, sleTrafficProfileMaxBurstSize Integer32, sleTrafficProfileUseCount Integer32 } -- 2.4.1.1.1 -- 1.3.6.1.4.1.6296.101.10.2.1.1.1 sleTrafficProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "meter Index" ::= { sleTrafficProfileEntry 1 } -- 2.4.1.1.2 -- 1.3.6.1.4.1.6296.101.10.2.1.1.2 sleTrafficProfileMinBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value is in unit for 64 kbps" ::= { sleTrafficProfileEntry 2 } -- 2.4.1.1.3 -- 1.3.6.1.4.1.6296.101.10.2.1.1.3 sleTrafficProfileMaxBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value is in unit for 64 kbps" ::= { sleTrafficProfileEntry 3 } -- 2.4.1.1.4 -- 1.3.6.1.4.1.6296.101.10.2.1.1.4 sleTrafficProfileMaxBurstSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the bucket used for metering" ::= { sleTrafficProfileEntry 4 } -- 1.3.6.1.4.1.6296.101.10.2.1.1.5 sleTrafficProfileUseCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleTrafficProfileEntry 5 } -- 2.4.2 -- 1.3.6.1.4.1.6296.101.10.2.2 sleTrafficProfileControl OBJECT IDENTIFIER ::= { sleTrafficProfile 2 } -- 2.4.2.1 -- 1.3.6.1.4.1.6296.101.10.2.2.1 sleTrafficProfileControlRequest OBJECT-TYPE SYNTAX SleTrafficProfileControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleTrafficProfileControl 1 } -- 2.4.2.2 -- 1.3.6.1.4.1.6296.101.10.2.2.2 sleTrafficProfileControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleTrafficProfileControl 2 } -- 2.4.2.3 -- 1.3.6.1.4.1.6296.101.10.2.2.3 sleTrafficProfileControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleTrafficProfileControl 3 } -- 2.4.2.4 -- 1.3.6.1.4.1.6296.101.10.2.2.4 sleTrafficProfileControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleTrafficProfileControl 4 } -- 2.4.2.5 -- 1.3.6.1.4.1.6296.101.10.2.2.5 sleTrafficProfileControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of last command" ::= { sleTrafficProfileControl 5 } -- 2.4.2.6 -- 1.3.6.1.4.1.6296.101.10.2.2.6 sleTrafficProfileControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "meter Index" ::= { sleTrafficProfileControl 6 } -- 2.4.2.7 -- 1.3.6.1.4.1.6296.101.10.2.2.7 sleTrafficProfileControlMinBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value is in unit for 64 kbps" ::= { sleTrafficProfileControl 7 } -- 2.4.2.8 -- 1.3.6.1.4.1.6296.101.10.2.2.8 sleTrafficProfileControlMaxBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value is in unit for 64 kbps" ::= { sleTrafficProfileControl 8 } -- 2.4.2.9 -- 1.3.6.1.4.1.6296.101.10.2.2.9 sleTrafficProfileControlMaxBurstSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The size of the bucket used for metering" ::= { sleTrafficProfileControl 9 } -- 2.4.3 -- 1.3.6.1.4.1.6296.101.10.2.3 sleTrafficProfileNotification OBJECT IDENTIFIER ::= { sleTrafficProfile 3 } -- 2.4.3.1 -- 1.3.6.1.4.1.6296.101.10.2.3.1 sleTrafficProfileChanged NOTIFICATION-TYPE OBJECTS { sleTrafficProfileMinBandwidth, sleTrafficProfileControlTimeStamp, sleTrafficProfileControlReqResult, sleTrafficProfileControlRequest, sleTrafficProfileMaxBurstSize, sleTrafficProfileMaxBandwidth } STATUS current DESCRIPTION "Description." ::= { sleTrafficProfileNotification 1 } -- 2.5 -- 1.3.6.1.4.1.6296.101.10.3 sleUserFlow OBJECT IDENTIFIER ::= { sleQoS 3 } -- 2.5.1 -- 1.3.6.1.4.1.6296.101.10.3.1 sleUserFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF SleUserFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleUserFlow 1 } -- 2.5.1.1 -- 1.3.6.1.4.1.6296.101.10.3.1.1 sleUserFlowEntry OBJECT-TYPE SYNTAX SleUserFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleUserFlowName } ::= { sleUserFlowTable 1 } SleUserFlowEntry ::= SEQUENCE { sleUserFlowName OCTET STRING, sleUserFlowIngressPorts OCTET STRING, sleUserFlowEgressPorts OCTET STRING, sleUserFlowEthernetType Integer32, sleUserFlowSrcMacAddr OCTET STRING, sleUserFlowDstMacAddr OCTET STRING, sleUserFlowVlan Integer32, sleUserFlow8021p Integer32, sleUserFlowSrcIpAddr IpAddress, sleUserFlowSrcPrefixLength Integer32, sleUserFlowDstIpAddr IpAddress, sleUserFlowDstPrefixLength Integer32, sleUserFlowIpPktPriorityType INTEGER, sleUserFlowIpPktPriority Integer32, sleUserFlowProtocolType Integer32, sleUserFlowTcpFlag BITS, sleUserFlowSrcL4Port Integer32, sleUserFlowDstL4Port Integer32, sleUserFlowPktLen Integer32, sleUserFlowValidFlags BITS, sleUserFlowMatchFlags BITS, sleUserFlowPriority INTEGER, sleUserFlowMatchCounterId Integer32, sleUserFlowMatchTrafficProfileId Integer32, sleUserFlowMatchQueue Integer32, sleUserFlowMatchIpPktPriorityType INTEGER, sleUserFlowMatchIpPktPriority Integer32, sleUserFlowMatchRedirPort Integer32, sleUserFlowMatchVid Integer32, sleUserFlowMatchDstMac OCTET STRING, sleUserFlowMatchPortMap OCTET STRING, sleUserFlowMatchEgressType INTEGER, sleUserFlowMatchAction BITS, sleUserFlowNomatchCounterId Integer32, sleUserFlowNomatchTrafficProfileId Integer32, sleUserFlowNomatchQueue Integer32, sleUserFlowNomatchIpPktPriorityType INTEGER, sleUserFlowNomatchIpPktPriority Integer32, sleUserFlowNomatchRedirPort Integer32, sleUserFlowNomatchVid Integer32, sleUserFlowNomatchAction BITS, sleUserFlowMatchColorMarkingId Integer32, sleUserFlowNomatchColorMarkingId Integer32, sleUserFlowInnerVlan Integer32, sleUserFlowInner8021p Integer32, sleUserFlowMatchRoutePrimary IpAddress, sleUserFlowMatchRouteSecondary IpAddress } -- 2.5.1.1.1 -- 1.3.6.1.4.1.6296.101.10.3.1.1.1 sleUserFlowName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of this user flow." ::= { sleUserFlowEntry 1 } -- 2.5.1.1.2 -- 1.3.6.1.4.1.6296.101.10.3.1.1.2 sleUserFlowIngressPorts OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress port number" ::= { sleUserFlowEntry 2 } -- 2.5.1.1.4 -- 1.3.6.1.4.1.6296.101.10.3.1.1.3 sleUserFlowEgressPorts OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Port Number" ::= { sleUserFlowEntry 3 } -- 2.5.1.1.6 -- 1.3.6.1.4.1.6296.101.10.3.1.1.4 sleUserFlowEthernetType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The ethernet type value in incoming frames" ::= { sleUserFlowEntry 4 } -- 2.5.1.1.8 -- 1.3.6.1.4.1.6296.101.10.3.1.1.5 sleUserFlowSrcMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "Source MAC address" ::= { sleUserFlowEntry 5 } -- 2.5.1.1.10 -- 1.3.6.1.4.1.6296.101.10.3.1.1.6 sleUserFlowDstMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "Destination MAC address" ::= { sleUserFlowEntry 6 } -- 2.5.1.1.12 -- 1.3.6.1.4.1.6296.101.10.3.1.1.7 sleUserFlowVlan OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID" ::= { sleUserFlowEntry 7 } -- 2.5.1.1.14 -- 1.3.6.1.4.1.6296.101.10.3.1.1.8 sleUserFlow8021p OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the IEEE802.1p priority in the packet" ::= { sleUserFlowEntry 8 } -- 2.5.1.1.16 -- 1.3.6.1.4.1.6296.101.10.3.1.1.9 sleUserFlowSrcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to match against the packet's source IP address." ::= { sleUserFlowEntry 9 } -- 2.5.1.1.18 -- 1.3.6.1.4.1.6296.101.10.3.1.1.10 sleUserFlowSrcPrefixLength OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "Subnet mask. The length of 0 indicates a match of any address" ::= { sleUserFlowEntry 10 } -- 2.5.1.1.20 -- 1.3.6.1.4.1.6296.101.10.3.1.1.11 sleUserFlowDstIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to match against the packet's destination IP address." ::= { sleUserFlowEntry 11 } -- 2.5.1.1.22 -- 1.3.6.1.4.1.6296.101.10.3.1.1.12 sleUserFlowDstPrefixLength OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Subnet mask. The length of 0 indicates a match of any address" ::= { sleUserFlowEntry 12 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.13 sleUserFlowIpPktPriorityType OBJECT-TYPE SYNTAX INTEGER { ipPrecedence(1), diffServ(2), ipToS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleUserFlowEntry 13 } -- 2.5.1.1.24 -- 1.3.6.1.4.1.6296.101.10.3.1.1.14 sleUserFlowIpPktPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The Priority value in incoming IP packet. If sleUserFlowIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowIpPktPriorityType is 3, this value's range is 0-255. " ::= { sleUserFlowEntry 14 } -- 2.5.1.1.26 -- 1.3.6.1.4.1.6296.101.10.3.1.1.15 sleUserFlowProtocolType OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP protocol type value" ::= { sleUserFlowEntry 15 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.16 sleUserFlowTcpFlag OBJECT-TYPE SYNTAX BITS { reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "TCP Flags" ::= { sleUserFlowEntry 16 } -- 2.5.1.1.30 -- 1.3.6.1.4.1.6296.101.10.3.1.1.17 sleUserFlowSrcL4Port OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The source L4 port number, only valid for TCP or UDP packets." ::= { sleUserFlowEntry 17 } -- 2.5.1.1.32 -- 1.3.6.1.4.1.6296.101.10.3.1.1.18 sleUserFlowDstL4Port OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination L4 port number, only valid for TCP or UDP packets." ::= { sleUserFlowEntry 18 } -- 2.5.1.1.28 -- 1.3.6.1.4.1.6296.101.10.3.1.1.19 sleUserFlowPktLen OBJECT-TYPE SYNTAX Integer32 (21..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The packet length of the incoming packet" ::= { sleUserFlowEntry 19 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.20 sleUserFlowValidFlags OBJECT-TYPE SYNTAX BITS { ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17), ufInnerVlanId(18), ufInner8021p(19) } MAX-ACCESS read-only STATUS current DESCRIPTION "User Flow Valid Flags" ::= { sleUserFlowEntry 20 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.21 sleUserFlowMatchFlags OBJECT-TYPE SYNTAX BITS { ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "User Flow Matching Flags" ::= { sleUserFlowEntry 21 } -- 2.5.1.1.38 -- 1.3.6.1.4.1.6296.101.10.3.1.1.22 sleUserFlowPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), highest(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of this user flow" ::= { sleUserFlowEntry 22 } -- 2.5.1.1.39 -- 1.3.6.1.4.1.6296.101.10.3.1.1.23 sleUserFlowMatchCounterId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter index to be apply for the matched packets." ::= { sleUserFlowEntry 23 } -- 2.5.1.1.40 -- 1.3.6.1.4.1.6296.101.10.3.1.1.24 sleUserFlowMatchTrafficProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic profile index to be apply for the matched packets." ::= { sleUserFlowEntry 24 } -- 2.5.1.1.45 -- 1.3.6.1.4.1.6296.101.10.3.1.1.25 sleUserFlowMatchQueue OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "TThe CoS value to be assign for the nomatched packets" ::= { sleUserFlowEntry 25 } -- 2.5.1.1.43 -- 1.3.6.1.4.1.6296.101.10.3.1.1.26 sleUserFlowMatchIpPktPriorityType OBJECT-TYPE SYNTAX INTEGER { ipPrecedence(1), diffServ(2), ipToS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Priority type to be applied to incoming IP packet." ::= { sleUserFlowEntry 26 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.27 sleUserFlowMatchIpPktPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Priority value in incoming IP packet. If sleUserFlowMatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowMatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowMatchIpPktPriorityType is 3, then this value's range is 0-255. " DEFVAL { -1 } ::= { sleUserFlowEntry 27 } -- 2.5.1.1.46 -- 1.3.6.1.4.1.6296.101.10.3.1.1.28 sleUserFlowMatchRedirPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port to redirect to a matched packet." ::= { sleUserFlowEntry 28 } -- 2.5.1.1.50 -- 1.3.6.1.4.1.6296.101.10.3.1.1.29 sleUserFlowMatchVid OBJECT-TYPE SYNTAX Integer32 (1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan id to be assigned for the matched packets" ::= { sleUserFlowEntry 29 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.30 sleUserFlowMatchDstMac OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleUserFlowEntry 30 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.31 sleUserFlowMatchPortMap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleUserFlowEntry 31 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.32 sleUserFlowMatchEgressType OBJECT-TYPE SYNTAX INTEGER { dmac(0), egressPorts(1), filterPorts(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleUserFlowEntry 32 } -- 2.5.1.1.41 -- 1.3.6.1.4.1.6296.101.10.3.1.1.33 sleUserFlowMatchAction OBJECT-TYPE SYNTAX BITS { ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12), ufActColorMarking(13), ufActRoute(14), ufActRouteReachability(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "The action to be apply for matched packets." ::= { sleUserFlowEntry 33 } -- 2.5.1.1.51 -- 1.3.6.1.4.1.6296.101.10.3.1.1.34 sleUserFlowNomatchCounterId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter index to be apply for the nomatched packets." ::= { sleUserFlowEntry 34 } -- 2.5.1.1.40 -- 1.3.6.1.4.1.6296.101.10.3.1.1.35 sleUserFlowNomatchTrafficProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic profile index to be apply for the nomatched packets." ::= { sleUserFlowEntry 35 } -- 2.5.1.1.43 -- 1.3.6.1.4.1.6296.101.10.3.1.1.36 sleUserFlowNomatchQueue OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The CoS value to be assign for the nomatched packets" ::= { sleUserFlowEntry 36 } -- 2.5.1.1.45 -- 1.3.6.1.4.1.6296.101.10.3.1.1.37 sleUserFlowNomatchIpPktPriorityType OBJECT-TYPE SYNTAX INTEGER { ipPrecedence(1), diffServ(2), ipToS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Priority type to be applied to incoming IP packet, in case nomatched." ::= { sleUserFlowEntry 37 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.38 sleUserFlowNomatchIpPktPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Priority value in incoming IP packet. If sleUserFlowNomatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowNomatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowNomatchIpPktPriorityType is 3, then this value's range is 0-255. " DEFVAL { -1 } ::= { sleUserFlowEntry 38 } -- 2.5.1.1.46 -- 1.3.6.1.4.1.6296.101.10.3.1.1.39 sleUserFlowNomatchRedirPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port to redirect to nomatched packet." ::= { sleUserFlowEntry 39 } -- 2.5.1.1.50 -- 1.3.6.1.4.1.6296.101.10.3.1.1.40 sleUserFlowNomatchVid OBJECT-TYPE SYNTAX Integer32 (0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan id to be assigned for the nomatched packets" ::= { sleUserFlowEntry 40 } -- 2.5.1.1.41 -- 1.3.6.1.4.1.6296.101.10.3.1.1.41 sleUserFlowNomatchAction OBJECT-TYPE SYNTAX BITS { ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "The action to be apply for nomatched packets." ::= { sleUserFlowEntry 41 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.42 sleUserFlowMatchColorMarkingId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The colormarking profile index to be apply for the matched packet." ::= { sleUserFlowEntry 42 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.43 sleUserFlowNomatchColorMarkingId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The colormarking profile index to be apply for the unmatched packet. (not supported)" ::= { sleUserFlowEntry 43 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.44 sleUserFlowInnerVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Inner VLAN ID in QinQ" ::= { sleUserFlowEntry 44 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.45 sleUserFlowInner8021p OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the inner IEEE802.1p priority in the packet" ::= { sleUserFlowEntry 45 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.46 sleUserFlowMatchRoutePrimary OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The policy-based-routing primary route" ::= { sleUserFlowEntry 46 } -- 1.3.6.1.4.1.6296.101.10.3.1.1.47 sleUserFlowMatchRouteSecondary OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The policy-based-routing secondary route" ::= { sleUserFlowEntry 47 } -- 2.5.2 -- 1.3.6.1.4.1.6296.101.10.3.2 sleUserFlowControl OBJECT IDENTIFIER ::= { sleUserFlow 2 } -- 1.3.6.1.4.1.6296.101.10.3.2.1 sleUserFlowControlReqest OBJECT-TYPE SYNTAX SleUserFlowControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 1 } -- 1.3.6.1.4.1.6296.101.10.3.2.2 sleUserFlowControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 2 } -- 1.3.6.1.4.1.6296.101.10.3.2.3 sleUserFlowControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 3 } -- 1.3.6.1.4.1.6296.101.10.3.2.4 sleUserFlowControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 4 } -- 1.3.6.1.4.1.6296.101.10.3.2.5 sleUserFlowControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 5 } -- 1.3.6.1.4.1.6296.101.10.3.2.6 sleUserFlowControlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 6 } -- 1.3.6.1.4.1.6296.101.10.3.2.7 sleUserFlowControlIngressPorts OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Ingress port" ::= { sleUserFlowControl 7 } -- 1.3.6.1.4.1.6296.101.10.3.2.8 sleUserFlowControlEgressPorts OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Egress port" ::= { sleUserFlowControl 8 } -- 1.3.6.1.4.1.6296.101.10.3.2.9 sleUserFlowControlEthernetType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 9 } -- 1.3.6.1.4.1.6296.101.10.3.2.10 sleUserFlowControlSrcMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Source MAC address" ::= { sleUserFlowControl 10 } -- 1.3.6.1.4.1.6296.101.10.3.2.11 sleUserFlowControlDstMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Destination MAC address" ::= { sleUserFlowControl 11 } -- 1.3.6.1.4.1.6296.101.10.3.2.12 sleUserFlowControlVlan OBJECT-TYPE SYNTAX Integer32 (1..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan ID" ::= { sleUserFlowControl 12 } -- 1.3.6.1.4.1.6296.101.10.3.2.13 sleUserFlowControl8021p OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the IEEE802.1p priority in the packet" ::= { sleUserFlowControl 13 } -- 1.3.6.1.4.1.6296.101.10.3.2.14 sleUserFlowControlSrcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to match against the packet's source IP address." ::= { sleUserFlowControl 14 } -- 1.3.6.1.4.1.6296.101.10.3.2.15 sleUserFlowControlSrcPrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask. The length of 0 indicates a match of any address" ::= { sleUserFlowControl 15 } -- 1.3.6.1.4.1.6296.101.10.3.2.16 sleUserFlowControlDstIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to match against the packet's destination IP address." ::= { sleUserFlowControl 16 } -- 1.3.6.1.4.1.6296.101.10.3.2.17 sleUserFlowControlDstPrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask. The length of 0 indicates a match of any address" ::= { sleUserFlowControl 17 } -- 1.3.6.1.4.1.6296.101.10.3.2.18 sleUserFlowControlIpPktPriorityType OBJECT-TYPE SYNTAX INTEGER { ipPrecedence(1), diffServ(2), ipToS(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 18 } -- 1.3.6.1.4.1.6296.101.10.3.2.19 sleUserFlowControlIpPktPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority value in incoming IP packet. If sleUserFlowControlIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowControlIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowControlIpPktPriorityType is 3, this value's range is 0-255. " ::= { sleUserFlowControl 19 } -- 1.3.6.1.4.1.6296.101.10.3.2.20 sleUserFlowControlProtocolType OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP protocol type value" ::= { sleUserFlowControl 20 } -- 1.3.6.1.4.1.6296.101.10.3.2.21 sleUserFlowControlTcpFlag OBJECT-TYPE SYNTAX BITS { reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 21 } -- 1.3.6.1.4.1.6296.101.10.3.2.22 sleUserFlowControlSrcL4Port OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The source L4 port number, only valid for TCP or UDP packets." ::= { sleUserFlowControl 22 } -- 1.3.6.1.4.1.6296.101.10.3.2.23 sleUserFlowControlDstL4Port OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination L4 port number, only valid for TCP or UDP packets." ::= { sleUserFlowControl 23 } -- 1.3.6.1.4.1.6296.101.10.3.2.24 sleUserFlowControlPktLen OBJECT-TYPE SYNTAX Integer32 (21..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The packet length of the incoming packet" ::= { sleUserFlowControl 24 } -- 1.3.6.1.4.1.6296.101.10.3.2.25 sleUserFlowControlValidFlag OBJECT-TYPE SYNTAX BITS { ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17), ufInnerVlanId(18), ufInner8021p(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ICMP type, only valid for ICMP packets." ::= { sleUserFlowControl 25 } -- 1.3.6.1.4.1.6296.101.10.3.2.26 sleUserFlowControlMatchFlag OBJECT-TYPE SYNTAX BITS { ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ICMP code, only valid for ICMP packets." ::= { sleUserFlowControl 26 } -- 1.3.6.1.4.1.6296.101.10.3.2.27 sleUserFlowControlPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), highest(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of this user flow" ::= { sleUserFlowControl 27 } -- 1.3.6.1.4.1.6296.101.10.3.2.28 sleUserFlowControlMatchCounterId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The counter index to be apply for the matched packets." ::= { sleUserFlowControl 28 } -- 1.3.6.1.4.1.6296.101.10.3.2.29 sleUserFlowControlMatchTrafficProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The traffic profile index to be apply for the matched packets." ::= { sleUserFlowControl 29 } -- 1.3.6.1.4.1.6296.101.10.3.2.30 sleUserFlowControlMatchQueue OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The CoS value to be assign for the matched packets" ::= { sleUserFlowControl 30 } -- 1.3.6.1.4.1.6296.101.10.3.2.31 sleUserFlowControlMatchIpPktPriorityType OBJECT-TYPE SYNTAX INTEGER { ipPrecedence(1), diffServ(2), ipToS(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 31 } -- 1.3.6.1.4.1.6296.101.10.3.2.32 sleUserFlowControlMatchIpPktPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255. " DEFVAL { -1 } ::= { sleUserFlowControl 32 } -- 1.3.6.1.4.1.6296.101.10.3.2.33 sleUserFlowControlMatchRedirPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The port to redirect to a matched packet." ::= { sleUserFlowControl 33 } -- 1.3.6.1.4.1.6296.101.10.3.2.34 sleUserFlowControlMatchVid OBJECT-TYPE SYNTAX Integer32 (1..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan id to be assigned for the matched packets" ::= { sleUserFlowControl 34 } -- 1.3.6.1.4.1.6296.101.10.3.2.35 sleUserFlowControlMatchDstMac OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 35 } -- 1.3.6.1.4.1.6296.101.10.3.2.36 sleUserFlowControlMatchPortMap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 36 } -- 1.3.6.1.4.1.6296.101.10.3.2.37 sleUserFlowControlMatchEgressType OBJECT-TYPE SYNTAX INTEGER { dmac(0), egressPorts(1), filterPorts(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 37 } -- 1.3.6.1.4.1.6296.101.10.3.2.38 sleUserFlowControlMatchAction OBJECT-TYPE SYNTAX BITS { ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12), ufActColorMarking(13), ufActRoute(14), ufActRouteReachability(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be apply for matched packets." ::= { sleUserFlowControl 38 } -- 1.3.6.1.4.1.6296.101.10.3.2.39 sleUserFlowControlNomatchCounterId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The counter index to be apply for the unmatched packets." ::= { sleUserFlowControl 39 } -- 1.3.6.1.4.1.6296.101.10.3.2.40 sleUserFlowControlNomatchTrafficProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The traffic profile index to be apply for the unmatched packets." ::= { sleUserFlowControl 40 } -- 1.3.6.1.4.1.6296.101.10.3.2.41 sleUserFlowControlNomatchQueue OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The CoS value to be assign for the unmatched packets" ::= { sleUserFlowControl 41 } -- 1.3.6.1.4.1.6296.101.10.3.2.42 sleUserFlowControlNomatchIpPktPriorityType OBJECT-TYPE SYNTAX INTEGER { ipPrecedence(1), diffServ(2), ipToS(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 42 } -- 1.3.6.1.4.1.6296.101.10.3.2.43 sleUserFlowControlNomatchIpPktPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255. " DEFVAL { -1 } ::= { sleUserFlowControl 43 } -- 1.3.6.1.4.1.6296.101.10.3.2.44 sleUserFlowControlNomatchRedirPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The port to redirect a unmatched packet." ::= { sleUserFlowControl 44 } -- 1.3.6.1.4.1.6296.101.10.3.2.45 sleUserFlowControlNomatchVid OBJECT-TYPE SYNTAX Integer32 (0..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan id to be assigned for the unmatched packets" ::= { sleUserFlowControl 45 } -- 1.3.6.1.4.1.6296.101.10.3.2.46 sleUserFlowControlNomatchAction OBJECT-TYPE SYNTAX BITS { ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be apply for unmatched packets." ::= { sleUserFlowControl 46 } -- 1.3.6.1.4.1.6296.101.10.3.2.47 sleUserFlowControlMatchColorMarkingId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The color marking profile index to be apply for the matched packet." ::= { sleUserFlowControl 47 } -- 1.3.6.1.4.1.6296.101.10.3.2.48 sleUserFlowControlNomatchColorMarkingId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The color marking profile index to be apply for the nomatched packet." ::= { sleUserFlowControl 48 } -- 1.3.6.1.4.1.6296.101.10.3.2.49 sleUserFlowControlInnerVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Inner VLAN ID" ::= { sleUserFlowControl 49 } -- 1.3.6.1.4.1.6296.101.10.3.2.50 sleUserFlowControlInner8021p OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the Inner IEEE802.1p priority in the packet" ::= { sleUserFlowControl 50 } -- 1.3.6.1.4.1.6296.101.10.3.2.51 sleUserFlowControlMatchRoutePrimary OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 51 } -- 1.3.6.1.4.1.6296.101.10.3.2.52 sleUserFlowControlMatchRouteSecondary OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleUserFlowControl 52 } -- 1.3.6.1.4.1.6296.101.10.3.3 sleUserFlowNotification OBJECT IDENTIFIER ::= { sleUserFlow 3 } -- 1.3.6.1.4.1.6296.101.10.3.3.1 sleUserFlowCreated NOTIFICATION-TYPE OBJECTS { sleUserFlowControlReqest, sleUserFlowControlTimeStamp, sleUserFlowControlReqResult, sleUserFlowControlName } STATUS current DESCRIPTION "Description." ::= { sleUserFlowNotification 1 } -- 1.3.6.1.4.1.6296.101.10.3.3.2 sleUserFlowDestroyed NOTIFICATION-TYPE OBJECTS { sleUserFlowControlReqest, sleUserFlowControlTimeStamp, sleUserFlowControlReqResult, sleUserFlowControlName } STATUS current DESCRIPTION "Description." ::= { sleUserFlowNotification 2 } -- 1.3.6.1.4.1.6296.101.10.3.3.3 sleUserFlowClassifierProfileChanged NOTIFICATION-TYPE OBJECTS { sleUserFlowControlReqest, sleUserFlowControlTimeStamp, sleUserFlowControlReqResult, sleUserFlowControlName } STATUS current DESCRIPTION "Description." ::= { sleUserFlowNotification 3 } -- 1.3.6.1.4.1.6296.101.10.3.3.4 sleUserFlowMatchActionProfileChanged NOTIFICATION-TYPE OBJECTS { sleUserFlowControlReqest, sleUserFlowControlTimeStamp, sleUserFlowControlReqResult, sleUserFlowControlName } STATUS current DESCRIPTION "Description." ::= { sleUserFlowNotification 4 } -- 1.3.6.1.4.1.6296.101.10.3.3.5 sleUserFlowNomatchActionProfileChanged NOTIFICATION-TYPE OBJECTS { sleUserFlowControlReqest, sleUserFlowControlTimeStamp, sleUserFlowControlReqResult, sleUserFlowControlName } STATUS current DESCRIPTION "Description." ::= { sleUserFlowNotification 5 } -- 2.6 -- 1.3.6.1.4.1.6296.101.10.4 slePortSchedule OBJECT IDENTIFIER ::= { sleQoS 4 } -- 1.3.6.1.4.1.6296.101.10.4.1 slePortSchedultTable OBJECT-TYPE SYNTAX SEQUENCE OF SlePortSchedultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { slePortSchedule 1 } -- 1.3.6.1.4.1.6296.101.10.4.1.1 slePortSchedultEntry OBJECT-TYPE SYNTAX SlePortSchedultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { slePortSchedulInterfaceIndex } ::= { slePortSchedultTable 1 } SlePortSchedultEntry ::= SEQUENCE { slePortSchedulInterfaceIndex Integer32, slePortScheduleMode INTEGER } -- 1.3.6.1.4.1.6296.101.10.4.1.1.1 slePortSchedulInterfaceIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Index" ::= { slePortSchedultEntry 1 } -- 1.3.6.1.4.1.6296.101.10.4.1.1.2 slePortScheduleMode OBJECT-TYPE SYNTAX INTEGER { strictqueueing(1), wrr(2), wfq(3), rr(4), drr(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The scheduling mode of port" ::= { slePortSchedultEntry 2 } -- 1.3.6.1.4.1.6296.101.10.4.2 slePortScheduleControl OBJECT IDENTIFIER ::= { slePortSchedule 2 } -- 1.3.6.1.4.1.6296.101.10.4.2.1 slePortScheduleControlRequest OBJECT-TYPE SYNTAX SlePortScheduleControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortScheduleControl 1 } -- 1.3.6.1.4.1.6296.101.10.4.2.2 sleScheduleControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortScheduleControl 2 } -- 1.3.6.1.4.1.6296.101.10.4.2.3 slePortScheduleControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { slePortScheduleControl 3 } -- 1.3.6.1.4.1.6296.101.10.4.2.4 slePortScheduleControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortScheduleControl 4 } -- 1.3.6.1.4.1.6296.101.10.4.2.5 slePortScheduleControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { slePortScheduleControl 5 } -- 1.3.6.1.4.1.6296.101.10.4.2.6 slePortScheduleControlInterfaceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interface Index" ::= { slePortScheduleControl 6 } -- 1.3.6.1.4.1.6296.101.10.4.2.7 slePortScheduleControlMode OBJECT-TYPE SYNTAX INTEGER { strictqueueing(1), wrr(2), wfq(3), rr(4), drr(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The scheduling mode of port" ::= { slePortScheduleControl 7 } -- 1.3.6.1.4.1.6296.101.10.4.3 slePortScheduleNotification OBJECT IDENTIFIER ::= { slePortSchedule 3 } -- 1.3.6.1.4.1.6296.101.10.4.3.1 slePortScheduleModeChanged NOTIFICATION-TYPE OBJECTS { slePortScheduleMode, slePortScheduleControlRequest, slePortScheduleControlTimeStamp, slePortScheduleControlReqResult } STATUS current DESCRIPTION "Description." ::= { slePortScheduleNotification 1 } -- 2.7 -- 1.3.6.1.4.1.6296.101.10.5 sleQueue OBJECT IDENTIFIER ::= { sleQoS 5 } -- 1.3.6.1.4.1.6296.101.10.5.1 sleQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF SleQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleQueue 1 } -- 1.3.6.1.4.1.6296.101.10.5.1.1 sleQueueEntry OBJECT-TYPE SYNTAX SleQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { slePortSchedulInterfaceIndex, sleQueueId } ::= { sleQueueTable 1 } SleQueueEntry ::= SEQUENCE { sleQueueId Integer32, sleQueueREDEnable INTEGER, sleQueueMappedCoS BITS, sleQueueWREDMinThreshold Integer32, sleQueueWREDMaxThreshold Integer32, sleQueueWREDProbMax Integer32, sleQueueMinBandwidth Integer32, sleQueueMaxBandwidth Integer32, sleQueueWeight Integer32, sleQueueMaxLatency Integer32, sleQueueMaxPackets Integer32, sleQueueQuantum INTEGER, sleQueueUsedPkts Counter32, sleQueueUsedBytes Counter32 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.1 sleQueueId OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "queue index" ::= { sleQueueEntry 1 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.2 sleQueueREDEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." DEFVAL { disable } ::= { sleQueueEntry 2 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.3 sleQueueMappedCoS OBJECT-TYPE SYNTAX BITS { cos0(0), cos1(1), cos2(2), cos3(3), cos4(4), cos5(5), cos6(6), cos7(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQueueEntry 3 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.4 sleQueueWREDMinThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets where WRED can start" ::= { sleQueueEntry 4 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.5 sleQueueWREDMaxThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Above max threshold, queue drops all ingress" ::= { sleQueueEntry 5 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.6 sleQueueWREDProbMax OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The worst case random drop probability" ::= { sleQueueEntry 6 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.7 sleQueueMinBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value is unit of 64kbps" ::= { sleQueueEntry 7 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.8 sleQueueMaxBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value is unit of 64 kbps." ::= { sleQueueEntry 8 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.9 sleQueueWeight OBJECT-TYPE SYNTAX Integer32 (-1 | 1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The weight of this queue. The value of -1 is unlimited" ::= { sleQueueEntry 9 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.10 sleQueueMaxLatency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQueueEntry 10 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.11 sleQueueMaxPackets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQueueEntry 11 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.12 sleQueueQuantum OBJECT-TYPE SYNTAX INTEGER (-1 | 1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The DRR quantum value." ::= { sleQueueEntry 12 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.13 sleQueueUsedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The used packets of port/queue." ::= { sleQueueEntry 13 } -- 1.3.6.1.4.1.6296.101.10.5.1.1.14 sleQueueUsedBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The used bytes of port/queue." ::= { sleQueueEntry 14 } -- 1.3.6.1.4.1.6296.101.10.5.2 sleQueueControl OBJECT IDENTIFIER ::= { sleQueue 2 } -- 1.3.6.1.4.1.6296.101.10.5.2.1 sleQueueControlRequest OBJECT-TYPE SYNTAX INTEGER { setQueueProfile(1), setQuantum(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleQueueControl 1 } -- 1.3.6.1.4.1.6296.101.10.5.2.2 sleQueueControlStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQueueControl 2 } -- 1.3.6.1.4.1.6296.101.10.5.2.3 sleQueueControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleQueueControl 3 } -- 1.3.6.1.4.1.6296.101.10.5.2.4 sleQueueControlTimeStamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQueueControl 4 } -- 1.3.6.1.4.1.6296.101.10.5.2.5 sleQueueControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleQueueControl 5 } -- 1.3.6.1.4.1.6296.101.10.5.2.6 sleQueueControlInterfaceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interface Index" ::= { sleQueueControl 6 } -- 1.3.6.1.4.1.6296.101.10.5.2.7 sleQueueControlId OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Queue index" ::= { sleQueueControl 7 } -- 1.3.6.1.4.1.6296.101.10.5.2.8 sleQueueControlREDEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." DEFVAL { disable } ::= { sleQueueControl 8 } -- 1.3.6.1.4.1.6296.101.10.5.2.9 sleQueueControlMappedCoS OBJECT-TYPE SYNTAX BITS { cos0(0), cos1(1), cos2(2), cos3(3), cos4(4), cos5(5), cos6(6), cos7(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleQueueControl 9 } -- 1.3.6.1.4.1.6296.101.10.5.2.10 sleQueueControlWREDMinThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of packets where WRED can start" ::= { sleQueueControl 10 } -- 1.3.6.1.4.1.6296.101.10.5.2.11 sleQueueControlWREDMaxThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Above max threshold, queue drops all ingress" ::= { sleQueueControl 11 } -- 1.3.6.1.4.1.6296.101.10.5.2.12 sleQueueControlWREDProbMax OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The worst case random drop probability" ::= { sleQueueControl 12 } -- 1.3.6.1.4.1.6296.101.10.5.2.13 sleQueueControlMinBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value is unit of 64kbps" ::= { sleQueueControl 13 } -- 1.3.6.1.4.1.6296.101.10.5.2.14 sleQueueControlMaxBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value is unit of 64kbps" ::= { sleQueueControl 14 } -- 1.3.6.1.4.1.6296.101.10.5.2.15 sleQueueControlWeight OBJECT-TYPE SYNTAX Integer32 (-1 | 1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The weight of this queue. The value of -1 is unlimited" ::= { sleQueueControl 15 } -- 1.3.6.1.4.1.6296.101.10.5.2.16 sleQueueControlMaxLatency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleQueueControl 16 } -- 1.3.6.1.4.1.6296.101.10.5.2.17 sleQueueControlMaxPackets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleQueueControl 17 } -- 1.3.6.1.4.1.6296.101.10.5.2.18 sleQueueControlQuantum OBJECT-TYPE SYNTAX INTEGER (-1 | 1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "The DRR quantum value." ::= { sleQueueControl 18 } -- 1.3.6.1.4.1.6296.101.10.5.3 sleQueueNotification OBJECT IDENTIFIER ::= { sleQueue 3 } -- 1.3.6.1.4.1.6296.101.10.5.3.1 sleQueueProfileChanged NOTIFICATION-TYPE OBJECTS { sleQueueWREDMinThreshold, sleQueueWREDMaxThreshold, sleQueueWREDProbMax, sleQueueMinBandwidth, sleQueueMaxBandwidth, sleQueueControlTimeStamp, sleQueueControlReqResult, sleQueueControlRequest, sleQueueWeight, sleQueueREDEnable, sleQueueMappedCoS } STATUS current DESCRIPTION "Description." ::= { sleQueueNotification 1 } -- 1.3.6.1.4.1.6296.101.10.5.3.2 sleQueueQuantumChanged NOTIFICATION-TYPE OBJECTS { sleQueueControlRequest, sleQueueControlTimeStamp, sleQueueControlReqResult, sleQueueControlQuantum } STATUS current DESCRIPTION "Description." ::= { sleQueueNotification 2 } -- 1.3.6.1.4.1.6296.101.10.6 sleCounter OBJECT IDENTIFIER ::= { sleQoS 6 } -- 1.3.6.1.4.1.6296.101.10.6.1 sleCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF SleCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleCounter 1 } -- 1.3.6.1.4.1.6296.101.10.6.1.1 sleCounterEntry OBJECT-TYPE SYNTAX SleCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleCounterIndex } ::= { sleCounterTable 1 } SleCounterEntry ::= SEQUENCE { sleCounterIndex INTEGER, sleCounterPackets Unsigned32 } -- 1.3.6.1.4.1.6296.101.10.6.1.1.1 sleCounterIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Counter Index" ::= { sleCounterEntry 1 } -- 1.3.6.1.4.1.6296.101.10.6.1.1.2 sleCounterPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets" ::= { sleCounterEntry 2 } -- 1.3.6.1.4.1.6296.101.10.6.2 sleCounterControl OBJECT IDENTIFIER ::= { sleCounter 2 } -- 1.3.6.1.4.1.6296.101.10.6.2.1 sleCounterControlRequest OBJECT-TYPE SYNTAX INTEGER { clearCounter(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleCounterControl 1 } -- 1.3.6.1.4.1.6296.101.10.6.2.2 sleCounterControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleCounterControl 2 } -- 1.3.6.1.4.1.6296.101.10.6.2.3 sleCounterControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleCounterControl 3 } -- 1.3.6.1.4.1.6296.101.10.6.2.4 sleCounterControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleCounterControl 4 } -- 1.3.6.1.4.1.6296.101.10.6.2.5 sleCounterControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleCounterControl 5 } -- 1.3.6.1.4.1.6296.101.10.6.2.6 sleCounterControlIndex OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleCounterControl 6 } -- 1.3.6.1.4.1.6296.101.10.6.3 sleCounterNotification OBJECT IDENTIFIER ::= { sleCounter 3 } -- 1.3.6.1.4.1.6296.101.10.6.3.1 sleCounterCleared NOTIFICATION-TYPE OBJECTS { sleCounterControlRequest, sleCounterControlTimeStamp, sleCounterControlReqResult, sleCounterControlIndex } STATUS current DESCRIPTION "Description." ::= { sleCounterNotification 1 } -- 1.3.6.1.4.1.6296.101.10.7 sleColorMarking OBJECT IDENTIFIER ::= { sleQoS 7 } -- 1.3.6.1.4.1.6296.101.10.7.1 sleColorMarkingTable OBJECT-TYPE SYNTAX SEQUENCE OF SleColorMarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleColorMarking 1 } -- 1.3.6.1.4.1.6296.101.10.7.1.1 sleColorMarkingEntry OBJECT-TYPE SYNTAX SleColorMarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleColorMarkingIndex } ::= { sleColorMarkingTable 1 } SleColorMarkingEntry ::= SEQUENCE { sleColorMarkingIndex INTEGER, sleColorMarkingType INTEGER, sleColorMarkingMode INTEGER, sleColorMarkingAwareMode INTEGER, sleColorMarkingCIR Integer32, sleColorMarkingCBS Integer32, sleColorMarkingPIR Integer32, sleColorMarkingPBS Integer32, sleColorMarkingEBS Integer32, sleColorMarkingRedAction BITS, sleColorMarkingYellowAction BITS, sleColorMarkingGreenAction BITS, sleColorMarkingRedDscp Integer32, sleColorMarkingYellowDscp Integer32, sleColorMarkingGreenDscp Integer32, sleColorMarkingUseCount Integer32 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.1 sleColorMarkingIndex OBJECT-TYPE SYNTAX INTEGER (1..2048) MAX-ACCESS read-only STATUS current DESCRIPTION "Color marking table index." ::= { sleColorMarkingEntry 1 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.2 sleColorMarkingType OBJECT-TYPE SYNTAX INTEGER { srTCM(0), trTCM(1) } UNITS "Enum" MAX-ACCESS read-only STATUS current DESCRIPTION "Color marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking. " DEFVAL { 0 } ::= { sleColorMarkingEntry 2 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.3 sleColorMarkingMode OBJECT-TYPE SYNTAX INTEGER { blind(0), aware(1) } UNITS "Enum" MAX-ACCESS read-only STATUS current DESCRIPTION "Color marking mode." DEFVAL { 0 } ::= { sleColorMarkingEntry 3 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.4 sleColorMarkingAwareMode OBJECT-TYPE SYNTAX INTEGER { unprotected(1), protected(2) } UNITS "Enum" MAX-ACCESS read-only STATUS current DESCRIPTION "Color marking aware mode. Used only when sleColorMarkingMode is aware." DEFVAL { 1 } ::= { sleColorMarkingEntry 4 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.5 sleColorMarkingCIR OBJECT-TYPE SYNTAX Integer32 (1..1000000) UNITS "Integer" MAX-ACCESS read-only STATUS current DESCRIPTION "Committed Information Rate. The value is in unit for 64 kbps. " DEFVAL { 0 } ::= { sleColorMarkingEntry 5 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.6 sleColorMarkingCBS OBJECT-TYPE SYNTAX Integer32 (1..4000) UNITS "Integer" MAX-ACCESS read-only STATUS current DESCRIPTION "Committed Burst Size. The value is in unit for square of 2 bits. " DEFVAL { 0 } ::= { sleColorMarkingEntry 6 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.7 sleColorMarkingPIR OBJECT-TYPE SYNTAX Integer32 (1..1000000) UNITS "Integer " MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps. ." DEFVAL { 0 } ::= { sleColorMarkingEntry 7 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.8 sleColorMarkingPBS OBJECT-TYPE SYNTAX Integer32 (1..4000) UNITS "Integer " MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits. " DEFVAL { 0 } ::= { sleColorMarkingEntry 8 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.9 sleColorMarkingEBS OBJECT-TYPE SYNTAX Integer32 (1..4000) UNITS "Integer " MAX-ACCESS read-only STATUS current DESCRIPTION "Excess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits. " DEFVAL { 0 } ::= { sleColorMarkingEntry 9 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.10 sleColorMarkingRedAction OBJECT-TYPE SYNTAX BITS { reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10) } UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The action to be apply when incoming packet is colored in red." DEFVAL { { 0 } } ::= { sleColorMarkingEntry 10 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.11 sleColorMarkingYellowAction OBJECT-TYPE SYNTAX BITS { reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10) } UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The action to be apply when incoming packet is colored in yellow." DEFVAL { { 0 } } ::= { sleColorMarkingEntry 11 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.12 sleColorMarkingGreenAction OBJECT-TYPE SYNTAX BITS { reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10) } UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The action to be apply when incoming packet is colored in green. (not supported)" DEFVAL { { 6 } } ::= { sleColorMarkingEntry 12 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.13 sleColorMarkingRedDscp OBJECT-TYPE SYNTAX Integer32 (0..63) UNITS "Integer " MAX-ACCESS read-only STATUS current DESCRIPTION "The dscp value to be apply when incoming packet is colored in red." DEFVAL { 30 } ::= { sleColorMarkingEntry 13 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.14 sleColorMarkingYellowDscp OBJECT-TYPE SYNTAX Integer32 (0..63) UNITS "Integer " MAX-ACCESS read-only STATUS current DESCRIPTION "The dscp value to be apply when incoming packet is colored in yellow." DEFVAL { 28 } ::= { sleColorMarkingEntry 14 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.15 sleColorMarkingGreenDscp OBJECT-TYPE SYNTAX Integer32 (0..63) UNITS "Integer " MAX-ACCESS read-only STATUS current DESCRIPTION "The dscp value to be apply when incoming packet is colored in green. (not supported)" DEFVAL { 26 } ::= { sleColorMarkingEntry 15 } -- 1.3.6.1.4.1.6296.101.10.7.1.1.16 sleColorMarkingUseCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of rules used this color marking profile." DEFVAL { 0 } ::= { sleColorMarkingEntry 16 } -- 1.3.6.1.4.1.6296.101.10.7.2 sleColorMarkingControl OBJECT IDENTIFIER ::= { sleColorMarking 2 } -- 1.3.6.1.4.1.6296.101.10.7.2.1 sleColorMarkingControlReqest OBJECT-TYPE SYNTAX INTEGER { setColorMarkingProfile(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleColorMarkingControl 1 } -- 1.3.6.1.4.1.6296.101.10.7.2.2 sleColorMarkingControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleColorMarkingControl 2 } -- 1.3.6.1.4.1.6296.101.10.7.2.3 sleColorMarkingControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleColorMarkingControl 3 } -- 1.3.6.1.4.1.6296.101.10.7.2.4 sleColorMarkingControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleColorMarkingControl 4 } -- 1.3.6.1.4.1.6296.101.10.7.2.5 sleColorMarkingControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleColorMarkingControl 5 } -- 1.3.6.1.4.1.6296.101.10.7.2.6 sleColorMarkingControlIndex OBJECT-TYPE SYNTAX Integer32 (1..2048) UNITS "index" MAX-ACCESS read-write STATUS current DESCRIPTION "Color marking table index" DEFVAL { 1 } ::= { sleColorMarkingControl 6 } -- 1.3.6.1.4.1.6296.101.10.7.2.7 sleColorMarkingControlType OBJECT-TYPE SYNTAX INTEGER { srTCM(0), trTCM(1) } UNITS "enum" MAX-ACCESS read-write STATUS current DESCRIPTION "Color marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking. " DEFVAL { 0 } ::= { sleColorMarkingControl 7 } -- 1.3.6.1.4.1.6296.101.10.7.2.8 sleColorMarkingControlMode OBJECT-TYPE SYNTAX INTEGER { blind(0), aware(1) } UNITS "enum" MAX-ACCESS read-write STATUS current DESCRIPTION "Color marking mode" DEFVAL { 0 } ::= { sleColorMarkingControl 8 } -- 1.3.6.1.4.1.6296.101.10.7.2.9 sleColorMarkingControlAwareMode OBJECT-TYPE SYNTAX INTEGER { unprotected(1), protected(2) } UNITS "enum" MAX-ACCESS read-write STATUS current DESCRIPTION "Color marking aware mode. Used only when sleColorMarkingControlMode is aware." DEFVAL { 1 } ::= { sleColorMarkingControl 9 } -- 1.3.6.1.4.1.6296.101.10.7.2.10 sleColorMarkingControlCIR OBJECT-TYPE SYNTAX Integer32 (1..1000000) UNITS "Integer" MAX-ACCESS read-write STATUS current DESCRIPTION "Committed Information Rate. The value is in unit for 64 kbps " DEFVAL { 0 } ::= { sleColorMarkingControl 10 } -- 1.3.6.1.4.1.6296.101.10.7.2.11 sleColorMarkingControlCBS OBJECT-TYPE SYNTAX Integer32 (1..4000) UNITS "Integer " MAX-ACCESS read-write STATUS current DESCRIPTION "Committed Burst Size. The value is in unit for square of 2 bits. " DEFVAL { 0 } ::= { sleColorMarkingControl 11 } -- 1.3.6.1.4.1.6296.101.10.7.2.12 sleColorMarkingControlPIR OBJECT-TYPE SYNTAX Integer32 (1..1000000) UNITS "Integer " MAX-ACCESS read-write STATUS current DESCRIPTION "Peak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps. " DEFVAL { 0 } ::= { sleColorMarkingControl 12 } -- 1.3.6.1.4.1.6296.101.10.7.2.13 sleColorMarkingControlPBS OBJECT-TYPE SYNTAX Integer32 (1..4000) UNITS "Integer " MAX-ACCESS read-write STATUS current DESCRIPTION "Peak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits. " DEFVAL { 0 } ::= { sleColorMarkingControl 13 } -- 1.3.6.1.4.1.6296.101.10.7.2.14 sleColorMarkingControlEBS OBJECT-TYPE SYNTAX Integer32 (1..4000) UNITS "Integer " MAX-ACCESS read-write STATUS current DESCRIPTION "Excess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits. " DEFVAL { 0 } ::= { sleColorMarkingControl 14 } -- 1.3.6.1.4.1.6296.101.10.7.2.15 sleColorMarkingControlRedAction OBJECT-TYPE SYNTAX BITS { reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10) } UNITS "bits" MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be apply when incoming packet is colored in red." DEFVAL { { 0 } } ::= { sleColorMarkingControl 15 } -- 1.3.6.1.4.1.6296.101.10.7.2.16 sleColorMarkingControlYellowAction OBJECT-TYPE SYNTAX BITS { reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10) } UNITS "bits" MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be apply when incoming packet is colored in yellow." DEFVAL { { 0 } } ::= { sleColorMarkingControl 16 } -- 1.3.6.1.4.1.6296.101.10.7.2.17 sleColorMarkingControlGreenAction OBJECT-TYPE SYNTAX BITS { reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10) } UNITS "bits" MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be apply when incoming packet is colored in green. (not supported)" DEFVAL { { 6 } } ::= { sleColorMarkingControl 17 } -- 1.3.6.1.4.1.6296.101.10.7.2.18 sleColorMarkingControlRedDscp OBJECT-TYPE SYNTAX Integer32 (0..63) UNITS "Integer" MAX-ACCESS read-write STATUS current DESCRIPTION "The dscp value to be apply when incoming packet is colored in red." DEFVAL { 30 } ::= { sleColorMarkingControl 18 } -- 1.3.6.1.4.1.6296.101.10.7.2.19 sleColorMarkingControlYellowDscp OBJECT-TYPE SYNTAX Integer32 (0..63) UNITS "Integer " MAX-ACCESS read-write STATUS current DESCRIPTION "The dscp value to be apply when incoming packet is colored in yellow." DEFVAL { 28 } ::= { sleColorMarkingControl 19 } -- 1.3.6.1.4.1.6296.101.10.7.2.20 sleColorMarkingControlGreenDscp OBJECT-TYPE SYNTAX Integer32 (0..63) UNITS "Integer " MAX-ACCESS read-write STATUS current DESCRIPTION "The dscp value to be apply when incoming packet is colored in green. (not supported)" DEFVAL { 26 } ::= { sleColorMarkingControl 20 } -- 1.3.6.1.4.1.6296.101.10.7.3 sleColorMarkingNotification OBJECT IDENTIFIER ::= { sleColorMarking 3 } -- 1.3.6.1.4.1.6296.101.10.7.3.1 sleColorMarkingProfileChanged NOTIFICATION-TYPE OBJECTS { sleColorMarkingControlReqest, sleColorMarkingControlReqResult, sleColorMarkingControlTimeStamp, sleColorMarkingType, sleColorMarkingMode, sleColorMarkingAwareMode, sleColorMarkingCIR, sleColorMarkingCBS, sleColorMarkingPIR, sleColorMarkingPBS, sleColorMarkingEBS, sleColorMarkingRedAction, sleColorMarkingYellowAction, sleColorMarkingGreenAction, sleColorMarkingRedDscp, sleColorMarkingYellowDscp, sleColorMarkingGreenDscp } STATUS current DESCRIPTION "Description." ::= { sleColorMarkingNotification 1 } -- 1.3.6.1.4.1.6296.101.10.8 sleQoSGroup OBJECT-GROUP OBJECTS { sleQosUserFlowNum, sleQosTrafficProfileNum, sleQosCounterNum, sleQosQueueNum, sleTrafficProfileIndex, sleTrafficProfileMinBandwidth, sleTrafficProfileMaxBandwidth, sleTrafficProfileMaxBurstSize, sleTrafficProfileUseCount, sleUserFlowName, sleUserFlowIngressPorts, sleUserFlowEgressPorts, sleUserFlowEthernetType, sleUserFlowSrcMacAddr, sleUserFlowDstMacAddr, sleUserFlowVlan, sleUserFlow8021p, sleUserFlowSrcIpAddr, sleUserFlowSrcPrefixLength, sleUserFlowDstIpAddr, sleUserFlowDstPrefixLength, sleUserFlowIpPktPriorityType, sleUserFlowIpPktPriority, sleUserFlowProtocolType, sleUserFlowTcpFlag, sleUserFlowSrcL4Port, sleUserFlowDstL4Port, sleUserFlowPktLen, sleUserFlowValidFlags, sleUserFlowMatchFlags, sleUserFlowPriority, sleUserFlowMatchCounterId, sleUserFlowMatchTrafficProfileId, sleUserFlowMatchQueue, sleUserFlowMatchIpPktPriorityType, sleUserFlowMatchIpPktPriority, sleUserFlowMatchRedirPort, sleUserFlowMatchVid, sleUserFlowMatchDstMac, sleUserFlowMatchPortMap, sleUserFlowMatchEgressType, sleUserFlowMatchAction, sleUserFlowNomatchCounterId, sleUserFlowNomatchTrafficProfileId, sleUserFlowNomatchQueue, sleUserFlowNomatchIpPktPriorityType, sleUserFlowNomatchIpPktPriority, sleUserFlowNomatchRedirPort, sleUserFlowNomatchVid, sleUserFlowNomatchAction, sleUserFlowMatchColorMarkingId, sleUserFlowNomatchColorMarkingId, slePortSchedulInterfaceIndex, slePortScheduleMode, sleQueueId, sleQueueREDEnable, sleQueueMappedCoS, sleQueueWREDMinThreshold, sleQueueWREDMaxThreshold, sleQueueWREDProbMax, sleQueueMinBandwidth, sleQueueMaxBandwidth, sleQueueWeight, sleQueueMaxLatency, sleQueueMaxPackets, sleCounterIndex, sleCounterPackets, sleColorMarkingIndex, sleColorMarkingType, sleColorMarkingMode, sleColorMarkingAwareMode, sleColorMarkingCIR, sleColorMarkingCBS, sleColorMarkingPIR, sleColorMarkingPBS, sleColorMarkingEBS, sleColorMarkingRedAction, sleColorMarkingYellowAction, sleColorMarkingGreenAction, sleColorMarkingRedDscp, sleColorMarkingYellowDscp, sleColorMarkingGreenDscp, sleQosRuleMode, sleQoSBaseControlRequest, sleQoSBaseControlStatus, sleQoSBaseControlTimer, sleQoSBaseControlTimeStamp, sleQoSBaseControlReqResult, sleQoSBaseControlRuleMode, sleTrafficProfileControlRequest, sleTrafficProfileControlStatus, sleTrafficProfileControlTimer, sleTrafficProfileControlTimeStamp, sleTrafficProfileControlReqResult, sleTrafficProfileControlIndex, sleTrafficProfileControlMinBandwidth, sleTrafficProfileControlMaxBandwidth, sleTrafficProfileControlMaxBurstSize, sleUserFlowMatchRoutePrimary, sleUserFlowMatchRouteSecondary, sleUserFlowControlReqest, sleUserFlowControlStatus, sleUserFlowControlTimer, sleUserFlowControlTimeStamp, sleUserFlowControlReqResult, sleUserFlowControlName, sleUserFlowControlIngressPorts, sleUserFlowControlEgressPorts, sleUserFlowControlEthernetType, sleUserFlowControlSrcMacAddr, sleUserFlowControlDstMacAddr, sleUserFlowControlVlan, sleUserFlowControl8021p, sleUserFlowControlSrcIpAddr, sleUserFlowControlSrcPrefixLength, sleUserFlowControlDstIpAddr, sleUserFlowControlDstPrefixLength, sleUserFlowControlIpPktPriorityType, sleUserFlowControlIpPktPriority, sleUserFlowControlProtocolType, sleUserFlowControlTcpFlag, sleUserFlowControlSrcL4Port, sleUserFlowControlDstL4Port, sleUserFlowControlPktLen, sleUserFlowControlValidFlag, sleUserFlowControlMatchFlag, sleUserFlowControlPriority, sleUserFlowControlMatchCounterId, sleUserFlowControlMatchTrafficProfileId, sleUserFlowControlMatchQueue, sleUserFlowControlMatchIpPktPriorityType, sleUserFlowControlMatchIpPktPriority, sleUserFlowControlMatchRedirPort, sleUserFlowControlMatchVid, sleUserFlowControlMatchDstMac, sleUserFlowControlMatchPortMap, sleUserFlowControlMatchEgressType, sleUserFlowControlMatchAction, sleUserFlowControlNomatchCounterId, sleUserFlowControlNomatchTrafficProfileId, sleUserFlowControlNomatchQueue, sleUserFlowControlNomatchIpPktPriorityType, sleUserFlowControlNomatchIpPktPriority, sleUserFlowControlNomatchRedirPort, sleUserFlowControlNomatchVid, sleUserFlowControlNomatchAction, sleUserFlowControlMatchColorMarkingId, sleUserFlowControlNomatchColorMarkingId, sleUserFlowControlInnerVlan, sleUserFlowControlInner8021p, sleUserFlowControlMatchRoutePrimary, sleUserFlowControlMatchRouteSecondary, slePortScheduleControlRequest, sleScheduleControlStatus, slePortScheduleControlTimer, slePortScheduleControlTimeStamp, slePortScheduleControlReqResult, slePortScheduleControlInterfaceIndex, slePortScheduleControlMode, sleQueueQuantum, sleQueueControlRequest, sleQueueControlStatus, sleQueueControlTimer, sleQueueControlTimeStamp, sleQueueControlReqResult, sleQueueControlInterfaceIndex, sleQueueControlId, sleQueueControlREDEnable, sleQueueControlMappedCoS, sleQueueControlWREDMinThreshold, sleQueueControlWREDMaxThreshold, sleQueueControlWREDProbMax, sleQueueControlMinBandwidth, sleQueueControlMaxBandwidth, sleQueueControlWeight, sleQueueControlMaxLatency, sleQueueControlMaxPackets, sleQueueControlQuantum, sleCounterControlRequest, sleCounterControlStatus, sleCounterControlTimer, sleCounterControlTimeStamp, sleCounterControlReqResult, sleCounterControlIndex, sleColorMarkingControlReqest, sleColorMarkingControlStatus, sleColorMarkingControlTimer, sleColorMarkingControlTimeStamp, sleColorMarkingControlReqResult, sleColorMarkingControlIndex, sleColorMarkingControlType, sleColorMarkingControlMode, sleColorMarkingControlAwareMode, sleColorMarkingControlCIR, sleColorMarkingControlCBS, sleColorMarkingControlPIR, sleColorMarkingControlPBS, sleColorMarkingControlEBS, sleColorMarkingControlRedAction, sleColorMarkingControlYellowAction, sleColorMarkingControlGreenAction, sleColorMarkingControlRedDscp, sleColorMarkingControlYellowDscp, sleColorMarkingControlGreenDscp, sleQueueUsedPkts, sleQueueUsedBytes, sleColorMarkingUseCount, sleQosColorMarkingProfileNum, sleUserFlowInnerVlan, sleUserFlowInner8021p } STATUS current DESCRIPTION "Description." ::= { sleQoS 8 } -- 1.3.6.1.4.1.6296.101.10.9 sleQoSControlGroup OBJECT-GROUP OBJECTS { sleTrafficProfileControlRequest, sleTrafficProfileControlStatus, sleTrafficProfileControlTimer, sleTrafficProfileControlTimeStamp, sleTrafficProfileControlReqResult, sleTrafficProfileControlIndex, sleTrafficProfileControlMinBandwidth, sleTrafficProfileControlMaxBandwidth, sleTrafficProfileControlMaxBurstSize, sleUserFlowControlReqest, sleUserFlowControlStatus, sleUserFlowControlTimer, sleUserFlowControlTimeStamp, sleUserFlowControlReqResult, sleUserFlowControlName, sleUserFlowControlIngressPorts, sleUserFlowControlEgressPorts, sleUserFlowControlEthernetType, sleUserFlowControlSrcMacAddr, sleUserFlowControlDstMacAddr, sleUserFlowControlVlan, sleUserFlowControl8021p, sleUserFlowControlSrcIpAddr, sleUserFlowControlSrcPrefixLength, sleUserFlowControlDstIpAddr, sleUserFlowControlDstPrefixLength, sleUserFlowControlIpPktPriorityType, sleUserFlowControlIpPktPriority, sleUserFlowControlProtocolType, sleUserFlowControlTcpFlag, sleUserFlowControlSrcL4Port, sleUserFlowControlDstL4Port, sleUserFlowControlPktLen, sleUserFlowControlValidFlag, sleUserFlowControlMatchFlag, sleUserFlowControlPriority, sleUserFlowControlMatchCounterId, sleUserFlowControlMatchTrafficProfileId, sleUserFlowControlMatchQueue, sleUserFlowControlMatchIpPktPriorityType, sleUserFlowControlMatchIpPktPriority, sleUserFlowControlMatchRedirPort, sleUserFlowControlMatchVid, sleUserFlowControlMatchDstMac, sleUserFlowControlMatchPortMap, sleUserFlowControlMatchEgressType, sleUserFlowControlMatchAction, sleUserFlowControlNomatchCounterId, sleUserFlowControlNomatchTrafficProfileId, sleUserFlowControlNomatchQueue, sleUserFlowControlNomatchIpPktPriorityType, sleUserFlowControlNomatchIpPktPriority, sleUserFlowControlNomatchRedirPort, sleUserFlowControlNomatchVid, sleUserFlowControlNomatchAction, sleUserFlowControlMatchColorMarkingId, sleUserFlowControlNomatchColorMarkingId, sleQueueControlRequest, sleQueueControlStatus, sleQueueControlTimer, sleQueueControlTimeStamp, sleQueueControlReqResult, sleQueueControlInterfaceIndex, sleQueueControlId, sleQueueControlREDEnable, sleQueueControlMappedCoS, sleQueueControlWREDMinThreshold, sleQueueControlWREDMaxThreshold, sleQueueControlWREDProbMax, sleQueueControlMinBandwidth, sleQueueControlMaxBandwidth, sleQueueControlWeight, sleQueueControlMaxLatency, sleUserFlowControlInnerVlan, sleUserFlowControlInner8021p, sleQosUserFlowNum, sleQosTrafficProfileNum, sleQosCounterNum, sleQosQueueNum, sleQosColorMarkingProfileNum, sleQosRuleMode, sleQoSBaseControlRequest, sleQoSBaseControlStatus, sleQoSBaseControlTimer, sleQoSBaseControlTimeStamp, sleQoSBaseControlReqResult, sleQoSBaseControlRuleMode, sleTrafficProfileIndex, sleTrafficProfileMinBandwidth, sleTrafficProfileMaxBandwidth, sleTrafficProfileMaxBurstSize, sleTrafficProfileUseCount, sleUserFlowName, sleUserFlowIngressPorts, sleUserFlowEgressPorts, sleUserFlowEthernetType, sleUserFlowSrcMacAddr, sleUserFlowDstMacAddr, sleUserFlowVlan, sleUserFlow8021p, sleUserFlowSrcIpAddr, sleUserFlowSrcPrefixLength, sleUserFlowDstIpAddr, sleUserFlowDstPrefixLength, sleUserFlowIpPktPriorityType, sleUserFlowIpPktPriority, sleUserFlowProtocolType, sleUserFlowTcpFlag, sleUserFlowSrcL4Port, sleUserFlowDstL4Port, sleUserFlowPktLen, sleUserFlowValidFlags, sleUserFlowMatchFlags, sleUserFlowPriority, sleUserFlowMatchCounterId, sleUserFlowMatchTrafficProfileId, sleUserFlowMatchQueue, sleUserFlowMatchIpPktPriorityType, sleUserFlowMatchIpPktPriority, sleUserFlowMatchRedirPort, sleUserFlowMatchVid, sleUserFlowMatchDstMac, sleUserFlowMatchPortMap, sleUserFlowMatchEgressType, sleUserFlowMatchAction, sleUserFlowNomatchCounterId, sleUserFlowNomatchTrafficProfileId, sleUserFlowNomatchQueue, sleUserFlowNomatchIpPktPriorityType, sleUserFlowNomatchIpPktPriority, sleUserFlowNomatchRedirPort, sleUserFlowNomatchVid, sleUserFlowNomatchAction, sleUserFlowMatchColorMarkingId, sleUserFlowNomatchColorMarkingId, sleUserFlowInnerVlan, sleUserFlowInner8021p, sleUserFlowMatchRoutePrimary, sleUserFlowMatchRouteSecondary, sleUserFlowControlMatchRoutePrimary, sleUserFlowControlMatchRouteSecondary, slePortSchedulInterfaceIndex, slePortScheduleMode, sleQueueId, sleQueueREDEnable, sleQueueMappedCoS, sleQueueWREDMinThreshold, sleQueueWREDMaxThreshold, sleQueueWREDProbMax, sleQueueMinBandwidth, sleQueueMaxBandwidth, sleQueueWeight, sleQueueMaxLatency, sleQueueMaxPackets, sleQueueQuantum, sleQueueControlQuantum, sleCounterIndex, sleCounterPackets, sleColorMarkingIndex, sleColorMarkingType, sleColorMarkingMode, sleColorMarkingAwareMode, sleColorMarkingCIR, sleColorMarkingCBS, sleColorMarkingPIR, sleColorMarkingPBS, sleColorMarkingEBS, sleColorMarkingRedAction, sleColorMarkingYellowAction, sleColorMarkingGreenAction, sleColorMarkingRedDscp, sleColorMarkingYellowDscp, sleColorMarkingGreenDscp, sleColorMarkingUseCount, sleQueueControlMaxPackets, slePortScheduleControlRequest, sleScheduleControlStatus, slePortScheduleControlTimer, slePortScheduleControlTimeStamp, slePortScheduleControlReqResult, slePortScheduleControlInterfaceIndex, slePortScheduleControlMode, sleCounterControlRequest, sleCounterControlStatus, sleCounterControlTimer, sleCounterControlTimeStamp, sleCounterControlReqResult, sleCounterControlIndex, sleColorMarkingControlReqest, sleColorMarkingControlStatus, sleColorMarkingControlTimer, sleColorMarkingControlTimeStamp, sleColorMarkingControlReqResult, sleColorMarkingControlIndex, sleColorMarkingControlType, sleColorMarkingControlMode, sleColorMarkingControlAwareMode, sleColorMarkingControlCIR, sleColorMarkingControlCBS, sleColorMarkingControlPIR, sleColorMarkingControlPBS, sleColorMarkingControlEBS, sleColorMarkingControlRedAction, sleColorMarkingControlYellowAction, sleColorMarkingControlGreenAction, sleColorMarkingControlRedDscp, sleColorMarkingControlYellowDscp, sleColorMarkingControlGreenDscp } STATUS current DESCRIPTION "Description." ::= { sleQoS 9 } -- 1.3.6.1.4.1.6296.101.10.11 sleQoSNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sleTrafficProfileChanged, sleUserFlowCreated, sleUserFlowDestroyed, sleUserFlowClassifierProfileChanged, sleUserFlowMatchActionProfileChanged, sleUserFlowNomatchActionProfileChanged, slePortScheduleModeChanged, sleQueueProfileChanged, sleCounterCleared, sleColorMarkingProfileChanged, sleQoSBaseRuleModeChanged, sleQueueQuantumChanged } STATUS current DESCRIPTION "Description." ::= { sleQoS 11 } END -- -- sle-qos-mib.mib --