-- -- slev2-security-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Tuesday, July 28, 2015 at 14:14:00 -- SLEV2-Security-MIB DEFINITIONS ::= BEGIN IMPORTS sleV2Mgmt FROM DASAN-SMI InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB SleControlStatusType, SleControlRequestResultType FROM SLE-TC-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Gauge32, Counter32, Counter64, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TimeStamp, TEXTUAL-CONVENTION FROM SNMPv2-TC; -- 1.3.6.1.4.1.6296.102.7 sleV2Security MODULE-IDENTITY LAST-UPDATED "200605051406Z" -- May 05, 2006 at 14:06 GMT ORGANIZATION "Organization." CONTACT-INFO "Contact-info." DESCRIPTION "slev2 security" ::= { sleV2Mgmt 7 } -- -- Type definitions -- IntFlowIndex ::= INTEGER (1..1024) IntClassIndex ::= INTEGER (1..1024) IntPolicyIndex ::= INTEGER (1..1024) OctetName ::= OCTET STRING (SIZE (1..64)) IntIpAddrMask ::= INTEGER (0..32) IntProtocolType ::= INTEGER (-1 | 0..255) IntL4Port ::= INTEGER (-1 | 0..65535) IntIcmpType ::= INTEGER (-1 | 0..255) IntIcmpCode ::= INTEGER (-1 | 0..255) IntInternetProtocolFlag ::= INTEGER { nothing(-1), tcp(1), ucp(2), icmp(3) } IntRulePriority ::= INTEGER { nothing(-1), low(1), medium(2), high(3), highest(4) } IntFlowClass ::= INTEGER { nothing(-1), flow(1), class(2), both(4) } IntInterfaceIndex ::= INTEGER (-1 | 1..512) IntFlowOrClass ::= INTEGER { flow(1), class(2) } IntPermit ::= INTEGER { deny(1), permit(2), none(3) } -- -- Textual conventions -- MacAddressMask ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents Mac address Mask. " SYNTAX OCTET STRING (SIZE (6)) -- -- Node definitions -- -- 1.3.6.1.4.1.6296.102.7.1 sleV2SecurityBase OBJECT IDENTIFIER ::= { sleV2Security 1 } -- 1.3.6.1.4.1.6296.102.7.2 sleVSecurity4 OBJECT IDENTIFIER ::= { sleV2Security 2 } -- 1.3.6.1.4.1.6296.102.7.2.5 sleV2SecurityACL OBJECT IDENTIFIER ::= { sleVSecurity4 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.1 sleV2Security4ACLBase OBJECT IDENTIFIER ::= { sleV2SecurityACL 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2 sleV2Security4ACLFlow OBJECT IDENTIFIER ::= { sleV2SecurityACL 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1 sleV2Security4ACLFlowInfo OBJECT IDENTIFIER ::= { sleV2Security4ACLFlow 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1 sleV2Security4ACLFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2Security4ACLFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL flow table." ::= { sleV2Security4ACLFlowInfo 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1 sleV2Security4ACLFlowEntry OBJECT-TYPE SYNTAX SleV2Security4ACLFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2Security4ACLFlowIndex" INDEX { sleV2Security4ACLFlowIndex } ::= { sleV2Security4ACLFlowTable 1 } SleV2Security4ACLFlowEntry ::= SEQUENCE { sleV2Security4ACLFlowIndex INTEGER, sleV2Security4ACLFlowName OctetName, sleV2Security4ACLFlowSrcIpAddr IpAddress, sleV2Security4ACLFlowSrcIpAddrMask IntIpAddrMask, sleV2Security4ACLFlowDstIpAddr IpAddress, sleV2Security4ACLFlowDstIpAddrMask IntIpAddrMask, sleV2Security4ACLFlowProtocolType IntProtocolType, sleV2Security4ACLFlowTcpSrcStartPort IntL4Port, sleV2Security4ACLFlowTcpSrcEndPort IntL4Port, sleV2Security4ACLFlowTcpDstStartPort IntL4Port, sleV2Security4ACLFlowTcpDstEndPort IntL4Port, sleV2Security4ACLFlowTcpFlag BITS, sleV2Security4ACLFlowUdpSrcStartPort IntL4Port, sleV2Security4ACLFlowUdpSrcEndPort IntL4Port, sleV2Security4ACLFlowUdpDstStartPort IntL4Port, sleV2Security4ACLFlowUdpDstEndPort IntL4Port, sleV2Security4ACLFlowIcmpType IntIcmpType, sleV2Security4ACLFlowIcmpCode IntIcmpCode, sleV2Security4ACLFlowHdrlen INTEGER, sleV2Security4ACLFlowIpFlag INTEGER, sleV2SecurityACLFlowInetAddrType InetAddressType, sleV2SecurityACLFlowSrcInetAddr InetAddress, sleV2SecurityACLFlowDstInetAddr InetAddress, sleV2SecurityACLFlowSrcInetAddrLen InetAddressPrefixLength, sleV2SecurityACLFlowDstInetAddrLen InetAddressPrefixLength } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.1 sleV2Security4ACLFlowIndex OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of flow" ::= { sleV2Security4ACLFlowEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.2 sleV2Security4ACLFlowName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of flow" ::= { sleV2Security4ACLFlowEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.3 sleV2Security4ACLFlowSrcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set) " ::= { sleV2Security4ACLFlowEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.4 sleV2Security4ACLFlowSrcIpAddrMask OBJECT-TYPE SYNTAX IntIpAddrMask MAX-ACCESS read-only STATUS current DESCRIPTION "The mask of source IP address The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.5 sleV2Security4ACLFlowDstIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set) " ::= { sleV2Security4ACLFlowEntry 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.6 sleV2Security4ACLFlowDstIpAddrMask OBJECT-TYPE SYNTAX IntIpAddrMask MAX-ACCESS read-only STATUS current DESCRIPTION "The mask of destination IP address The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowEntry 6 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.7 sleV2Security4ACLFlowProtocolType OBJECT-TYPE SYNTAX IntProtocolType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowTcpFlag value is available If the value is użĄ(17), From sleV2QoS4FlowUdpSrcStartPort to sleV2QoS4FlowUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowIcmpType and sleV2QoS4FlowIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode value is not available The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowEntry 7 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.8 sleV2Security4ACLFlowTcpSrcStartPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The start source port in range of source port in TCP packet The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowEntry 8 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.9 sleV2Security4ACLFlowTcpSrcEndPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The end source port in range of source port in TCP packet The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowEntry 9 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.10 sleV2Security4ACLFlowTcpDstStartPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The start destination port in range of source port in TCP packet. The value of -1 means any(not set)" ::= { sleV2Security4ACLFlowEntry 10 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.11 sleV2Security4ACLFlowTcpDstEndPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)" ::= { sleV2Security4ACLFlowEntry 11 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.12 sleV2Security4ACLFlowTcpFlag OBJECT-TYPE SYNTAX BITS { reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The flag in TCP packet" ::= { sleV2Security4ACLFlowEntry 12 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.13 sleV2Security4ACLFlowUdpSrcStartPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The start source port in range of source port in UDP packet The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowEntry 13 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.14 sleV2Security4ACLFlowUdpSrcEndPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The end source port in range of source port in UDP packet The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowEntry 14 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.15 sleV2Security4ACLFlowUdpDstStartPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)" ::= { sleV2Security4ACLFlowEntry 15 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.16 sleV2Security4ACLFlowUdpDstEndPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)" ::= { sleV2Security4ACLFlowEntry 16 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.17 sleV2Security4ACLFlowIcmpType OBJECT-TYPE SYNTAX IntIcmpType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of ICMP message The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowEntry 17 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.18 sleV2Security4ACLFlowIcmpCode OBJECT-TYPE SYNTAX IntIcmpCode MAX-ACCESS read-only STATUS current DESCRIPTION "The code of ICMP message The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowEntry 18 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.19 sleV2Security4ACLFlowHdrlen OBJECT-TYPE SYNTAX INTEGER (0 | 1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP header length. The value of 0 means any(not set)" ::= { sleV2Security4ACLFlowEntry 19 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.20 sleV2Security4ACLFlowIpFlag OBJECT-TYPE SYNTAX INTEGER { none(0), srcAny(1), dstAny(2), srcDstAny(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The any flag of IP address." ::= { sleV2Security4ACLFlowEntry 20 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.21 sleV2SecurityACLFlowInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "IP address type" ::= { sleV2Security4ACLFlowEntry 21 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.22 sleV2SecurityACLFlowSrcInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to match against the packetĄŻs source IP address." ::= { sleV2Security4ACLFlowEntry 22 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.23 sleV2SecurityACLFlowDstInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to match against the packetĄŻs destination IP address." ::= { sleV2Security4ACLFlowEntry 23 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.24 sleV2SecurityACLFlowSrcInetAddrLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length of source IP address " ::= { sleV2Security4ACLFlowEntry 24 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.25 sleV2SecurityACLFlowDstInetAddrLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length of destination IP address" ::= { sleV2Security4ACLFlowEntry 25 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2 sleV2Security4ACLFlowControl OBJECT IDENTIFIER ::= { sleV2Security4ACLFlowInfo 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.1 sleV2Security4ACLFlowControlRequest OBJECT-TYPE SYNTAX INTEGER { createFlow(1), modifyFlow(2), destroyFlow(3), destroyAllFlow(4), createFlowEx(5), setFlowEx(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2Security4ACLFlowControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.2 sleV2Security4ACLFlowControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2Security4ACLFlowControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.3 sleV2Security4ACLFlowControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2Security4ACLFlowControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.4 sleV2Security4ACLFlowControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2Security4ACLFlowControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.5 sleV2Security4ACLFlowControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2Security4ACLFlowControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.6 sleV2Security4ACLFlowControlIndex OBJECT-TYPE SYNTAX IntFlowIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of flow" ::= { sleV2Security4ACLFlowControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.7 sleV2Security4ACLFlowControlName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-write STATUS current DESCRIPTION "The name of flow" ::= { sleV2Security4ACLFlowControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.8 sleV2Security4ACLFlowControlSrcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set) " ::= { sleV2Security4ACLFlowControl 8 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.9 sleV2Security4ACLFlowControlSrcIpAddrMask OBJECT-TYPE SYNTAX IntIpAddrMask MAX-ACCESS read-write STATUS current DESCRIPTION "The mask of source IP address The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowControl 9 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.10 sleV2Security4ACLFlowControlDstIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set) " ::= { sleV2Security4ACLFlowControl 10 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.11 sleV2Security4ACLFlowControlDstIpAddrMask OBJECT-TYPE SYNTAX IntIpAddrMask MAX-ACCESS read-write STATUS current DESCRIPTION "The mask of destination IP address The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowControl 11 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.12 sleV2Security4ACLFlowControlProtocolType OBJECT-TYPE SYNTAX IntProtocolType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlTcpFlag value is available If the value is użĄ(17), From sleV2QoS4FlowControlUdpSrcStartPort to sleV2QoS4FlowControlUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowControlIcmpType and sleV2QoS4FlowControlIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlIcmpCode value is not available The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowControl 12 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.13 sleV2Security4ACLFlowControlTcpSrcStartPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The start source port in range of source port in TCP packet The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowControl 13 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.14 sleV2Security4ACLFlowControlTcpSrcEndPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The end source port in range of source port in TCP packet The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowControl 14 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.15 sleV2Security4ACLFlowControlTcpDstStartPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The start destination port in range of source port in TCP packet. The value of -1 means any(not set)" ::= { sleV2Security4ACLFlowControl 15 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.16 sleV2Security4ACLFlowControlTcpDstEndPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)" ::= { sleV2Security4ACLFlowControl 16 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.17 sleV2Security4ACLFlowControlTcpFlag OBJECT-TYPE SYNTAX BITS { reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The flag in TCP packet" ::= { sleV2Security4ACLFlowControl 17 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.18 sleV2Security4ACLFlowControlUdpSrcStartPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The start source port in range of source port in UDP packet The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowControl 18 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.19 sleV2Security4ACLFlowControlUdpSrcEndPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The end source port in range of source port in UDP packet The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowControl 19 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.20 sleV2Security4ACLFlowControlUdpDstStartPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)" ::= { sleV2Security4ACLFlowControl 20 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.21 sleV2Security4ACLFlowControlUdpDstEndPort OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)" ::= { sleV2Security4ACLFlowControl 21 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.22 sleV2Security4ACLFlowControlIcmpType OBJECT-TYPE SYNTAX IntIcmpType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of ICMP message The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowControl 22 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.23 sleV2Security4ACLFlowControlIcmpCode OBJECT-TYPE SYNTAX IntIcmpCode MAX-ACCESS read-write STATUS current DESCRIPTION "The code of ICMP message The value of -1 means any(not set) " ::= { sleV2Security4ACLFlowControl 23 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.24 sleV2Security4ACLFlowControlHdrlen OBJECT-TYPE SYNTAX INTEGER (0 | 1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP header length The value of 0 means any(not set)" ::= { sleV2Security4ACLFlowControl 24 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.25 sleV2Security4ACLFlowControlIpFlag OBJECT-TYPE SYNTAX INTEGER { none(0), srcAny(1), dstAny(2), srcDstAny(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The any flag of IP address." ::= { sleV2Security4ACLFlowControl 25 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.26 sleV2SecurityACLFlowControlInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "IP address type" ::= { sleV2Security4ACLFlowControl 26 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.27 sleV2SecurityACLFlowControlSrcInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to match against the packetĄŻs source IP address." ::= { sleV2Security4ACLFlowControl 27 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.28 sleV2SecurityACLFlowControlDstInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to match against the packetĄŻs destination IP address." ::= { sleV2Security4ACLFlowControl 28 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.29 sleV2SecurityACLFlowControlSrcInetAddrLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-write STATUS current DESCRIPTION "The prefix length of source IP address" ::= { sleV2Security4ACLFlowControl 29 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.30 sleV2SecurityACLFlowControlDstInetAddrLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-write STATUS current DESCRIPTION "The prefix length of destination IP address" ::= { sleV2Security4ACLFlowControl 30 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.3 sleV2Security4ACLFlowNotification OBJECT IDENTIFIER ::= { sleV2Security4ACLFlowInfo 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.1 sleACLFlowCreated NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLFlowControlRequest, sleV2Security4ACLFlowControlTimeStamp, sleV2Security4ACLFlowIpFlag, sleV2Security4ACLFlowControlIpFlag, sleV2Security4ACLFlowControlReqResult, sleV2Security4ACLFlowName, sleV2Security4ACLFlowSrcIpAddr, sleV2Security4ACLFlowSrcIpAddrMask, sleV2Security4ACLFlowDstIpAddr, sleV2Security4ACLFlowDstIpAddrMask, sleV2Security4ACLFlowProtocolType, sleV2Security4ACLFlowTcpSrcStartPort, sleV2Security4ACLFlowTcpSrcEndPort, sleV2Security4ACLFlowTcpDstStartPort, sleV2Security4ACLFlowTcpDstEndPort, sleV2Security4ACLFlowTcpFlag, sleV2Security4ACLFlowUdpSrcStartPort, sleV2Security4ACLFlowUdpSrcEndPort, sleV2Security4ACLFlowUdpDstStartPort, sleV2Security4ACLFlowUdpDstEndPort, sleV2Security4ACLFlowIcmpType, sleV2Security4ACLFlowIcmpCode, sleV2Security4ACLFlowHdrlen } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLFlowNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.2 sleACLFlowChanged NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLFlowControlRequest, sleV2Security4ACLFlowControlTimeStamp, sleV2Security4ACLFlowControlReqResult, sleV2Security4ACLFlowIpFlag, sleV2Security4ACLFlowControlIpFlag, sleV2Security4ACLFlowControlIndex, sleV2Security4ACLFlowSrcIpAddr, sleV2Security4ACLFlowSrcIpAddrMask, sleV2Security4ACLFlowDstIpAddr, sleV2Security4ACLFlowDstIpAddrMask, sleV2Security4ACLFlowProtocolType, sleV2Security4ACLFlowTcpSrcStartPort, sleV2Security4ACLFlowTcpSrcEndPort, sleV2Security4ACLFlowTcpDstStartPort, sleV2Security4ACLFlowTcpDstEndPort, sleV2Security4ACLFlowTcpFlag, sleV2Security4ACLFlowUdpSrcStartPort, sleV2Security4ACLFlowUdpSrcEndPort, sleV2Security4ACLFlowUdpDstStartPort, sleV2Security4ACLFlowUdpDstEndPort, sleV2Security4ACLFlowIcmpType, sleV2Security4ACLFlowIcmpCode, sleV2Security4ACLFlowHdrlen } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLFlowNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.3 sleACLFlowDestroyed NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLFlowControlRequest, sleV2Security4ACLFlowControlTimeStamp, sleV2Security4ACLFlowControlReqResult, sleV2Security4ACLFlowControlIndex } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLFlowNotification 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.4 sleACLFlowAllDestroyed NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLFlowControlRequest, sleV2Security4ACLFlowControlTimeStamp, sleV2Security4ACLFlowControlReqResult } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLFlowNotification 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.5 sleACLFlowExCreated NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLFlowControlRequest, sleV2Security4ACLFlowControlTimeStamp, sleV2Security4ACLFlowControlReqResult, sleV2Security4ACLFlowName, sleV2SecurityACLFlowInetAddrType, sleV2SecurityACLFlowSrcInetAddr, sleV2SecurityACLFlowDstInetAddr, sleV2SecurityACLFlowSrcInetAddrLen, sleV2SecurityACLFlowDstInetAddrLen, sleV2Security4ACLFlowProtocolType, sleV2Security4ACLFlowTcpSrcStartPort, sleV2Security4ACLFlowTcpSrcEndPort, sleV2Security4ACLFlowTcpDstStartPort, sleV2Security4ACLFlowTcpDstEndPort, sleV2Security4ACLFlowTcpFlag, sleV2Security4ACLFlowUdpSrcStartPort, sleV2Security4ACLFlowUdpSrcEndPort, sleV2Security4ACLFlowUdpDstStartPort, sleV2Security4ACLFlowUdpDstEndPort, sleV2Security4ACLFlowIcmpType, sleV2Security4ACLFlowIcmpCode, sleV2Security4ACLFlowHdrlen, sleV2Security4ACLFlowIpFlag } STATUS current DESCRIPTION "createACLFlowEx" ::= { sleV2Security4ACLFlowNotification 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.6 sleACLFlowExChanged NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLFlowControlRequest, sleV2Security4ACLFlowControlTimeStamp, sleV2Security4ACLFlowControlReqResult, sleV2Security4ACLFlowIndex, sleV2SecurityACLFlowInetAddrType, sleV2SecurityACLFlowSrcInetAddr, sleV2SecurityACLFlowDstInetAddr, sleV2SecurityACLFlowSrcInetAddrLen, sleV2SecurityACLFlowDstInetAddrLen, sleV2Security4ACLFlowProtocolType, sleV2Security4ACLFlowTcpSrcStartPort, sleV2Security4ACLFlowTcpSrcEndPort, sleV2Security4ACLFlowTcpDstStartPort, sleV2Security4ACLFlowTcpDstEndPort, sleV2Security4ACLFlowTcpFlag, sleV2Security4ACLFlowUdpSrcStartPort, sleV2Security4ACLFlowUdpSrcEndPort, sleV2Security4ACLFlowUdpDstStartPort, sleV2Security4ACLFlowUdpDstEndPort, sleV2Security4ACLFlowIcmpType, sleV2Security4ACLFlowIcmpCode, sleV2Security4ACLFlowHdrlen, sleV2Security4ACLFlowIpFlag } STATUS current DESCRIPTION "setACLFlowEx" ::= { sleV2Security4ACLFlowNotification 6 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.2 sleV2Security4ACLFlowClass OBJECT IDENTIFIER ::= { sleV2Security4ACLFlow 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.2.1 sleV2Security4ACLFlowClassTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2Security4ACLFlowClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL flow class table." ::= { sleV2Security4ACLFlowClass 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1 sleV2Security4ACLFlowClassEntry OBJECT-TYPE SYNTAX SleV2Security4ACLFlowClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowClassIndex" INDEX { sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowClassIndex } ::= { sleV2Security4ACLFlowClassTable 1 } SleV2Security4ACLFlowClassEntry ::= SEQUENCE { sleV2Security4ACLFlowClassIndex IntClassIndex, sleV2Security4ACLFlowClassID IntClassIndex, sleV2Security4ACLFlowClassName OctetName } -- 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.1 sleV2Security4ACLFlowClassIndex OBJECT-TYPE SYNTAX IntClassIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the class for the flow" ::= { sleV2Security4ACLFlowClassEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.2 sleV2Security4ACLFlowClassID OBJECT-TYPE SYNTAX IntClassIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the class" ::= { sleV2Security4ACLFlowClassEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.3 sleV2Security4ACLFlowClassName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the class" ::= { sleV2Security4ACLFlowClassEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.3 sleV2Security4ACLFlowPolicy OBJECT IDENTIFIER ::= { sleV2Security4ACLFlow 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.3.1 sleV2QoS4ACLFlowPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2QoS4ACLFlowPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL flow policy table." ::= { sleV2Security4ACLFlowPolicy 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1 sleV2QoS4ACLFlowPolicyEntry OBJECT-TYPE SYNTAX SleV2QoS4ACLFlowPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowPolicyIndex" INDEX { sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowPolicyIndex } ::= { sleV2QoS4ACLFlowPolicyTable 1 } SleV2QoS4ACLFlowPolicyEntry ::= SEQUENCE { sleV2Security4ACLFlowPolicyIndex IntPolicyIndex, sleV2Security4ACLFlowPolicyID IntPolicyIndex, sleV2Security4ACLFlowPolicyName OctetName } -- 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.1 sleV2Security4ACLFlowPolicyIndex OBJECT-TYPE SYNTAX IntPolicyIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the policy for the flow" ::= { sleV2QoS4ACLFlowPolicyEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.2 sleV2Security4ACLFlowPolicyID OBJECT-TYPE SYNTAX IntPolicyIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the policy" ::= { sleV2QoS4ACLFlowPolicyEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.3 sleV2Security4ACLFlowPolicyName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the policy" ::= { sleV2QoS4ACLFlowPolicyEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3 sleV2Security4ACLClass OBJECT IDENTIFIER ::= { sleV2SecurityACL 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1 sleV2Security4ACLClassInfo OBJECT IDENTIFIER ::= { sleV2Security4ACLClass 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.1 sleV2Security4ACLClassTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2Security4ACLClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL class table." ::= { sleV2Security4ACLClassInfo 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1 sleV2Security4ACLClassEntry OBJECT-TYPE SYNTAX SleV2Security4ACLClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2Security4ACLClassIndex" INDEX { sleV2Security4ACLClassIndex } ::= { sleV2Security4ACLClassTable 1 } SleV2Security4ACLClassEntry ::= SEQUENCE { sleV2Security4ACLClassIndex IntClassIndex, sleV2Security4ACLClassName OctetName, sleV2Security4ACLClassFlowCnt Counter32 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.1 sleV2Security4ACLClassIndex OBJECT-TYPE SYNTAX IntClassIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of class" ::= { sleV2Security4ACLClassEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.2 sleV2Security4ACLClassName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of class" ::= { sleV2Security4ACLClassEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.3 sleV2Security4ACLClassFlowCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of flow in class" ::= { sleV2Security4ACLClassEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.2 sleV2Security4ACLClassControl OBJECT IDENTIFIER ::= { sleV2Security4ACLClassInfo 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.1 sleV2Security4ACLClassControlRequest OBJECT-TYPE SYNTAX INTEGER { createClass(1), destroyClass(2), destroyAllClass(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2Security4ACLClassControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.2 sleV2Security4ACLClassControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2Security4ACLClassControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.3 sleV2Security4ACLClassControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2Security4ACLClassControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.4 sleV2Security4ACLClassControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2Security4ACLClassControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.5 sleV2Security4ACLClassControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2Security4ACLClassControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.6 sleV2Security4ACLClassControlIndex OBJECT-TYPE SYNTAX IntClassIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of class" ::= { sleV2Security4ACLClassControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.7 sleV2Security4ACLClassControlName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-write STATUS current DESCRIPTION "The name of class" ::= { sleV2Security4ACLClassControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.3 sleV2Security4ACLClassNotification OBJECT IDENTIFIER ::= { sleV2Security4ACLClassInfo 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.1 sleACLClassCreated NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLClassControlRequest, sleV2Security4ACLClassControlTimeStamp, sleV2Security4ACLClassControlReqResult, sleV2Security4ACLFlowClassName } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLClassNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.2 sleACLClassDestroyed NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLClassControlRequest, sleV2Security4ACLClassControlTimeStamp, sleV2Security4ACLClassControlReqResult, sleV2Security4ACLClassControlIndex } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLClassNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.3 sleACLClassAllDestroyed NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLClassControlRequest, sleV2Security4ACLClassControlTimeStamp, sleV2Security4ACLClassControlReqResult } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLClassNotification 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2 sleV2Security4ACLClassFlow OBJECT IDENTIFIER ::= { sleV2Security4ACLClass 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.1 sleV2Security4ACLClassFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2Security4ACLClassFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLClassFlow 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1 sleV2Security4ACLClassFlowEntry OBJECT-TYPE SYNTAX SleV2Security4ACLClassFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleV2Security4ACLClassIndex, sleV2Security4ACLClassFlowIndex } ::= { sleV2Security4ACLClassFlowTable 1 } SleV2Security4ACLClassFlowEntry ::= SEQUENCE { sleV2Security4ACLClassFlowIndex IntFlowIndex, sleV2Security4ACLClassFlowID IntFlowIndex, sleV2Security4ACLClassFlowName OctetName, sleV2Security4ACLClassFlowClassName OctetName } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.1 sleV2Security4ACLClassFlowIndex OBJECT-TYPE SYNTAX IntFlowIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of flow in class" ::= { sleV2Security4ACLClassFlowEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.2 sleV2Security4ACLClassFlowID OBJECT-TYPE SYNTAX IntFlowIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of flow" ::= { sleV2Security4ACLClassFlowEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.3 sleV2Security4ACLClassFlowName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the flow" ::= { sleV2Security4ACLClassFlowEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.4 sleV2Security4ACLClassFlowClassName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "The class name of the Classflow" ::= { sleV2Security4ACLClassFlowEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2 sleV2Security4ACLClassFlowControl OBJECT IDENTIFIER ::= { sleV2Security4ACLClassFlow 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.1 sleV2Security4ACLClassFlowControlRequest OBJECT-TYPE SYNTAX INTEGER { addFlow(1), deleteFlow(2), deleteAllFlow(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2Security4ACLClassFlowControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.2 sleV2Security4ACLClassFlowControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2Security4ACLClassFlowControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.3 sleV2Security4ACLClassFlowControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2Security4ACLClassFlowControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.4 sleV2Security4ACLClassFlowControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2Security4ACLClassFlowControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.5 sleV2Security4ACLClassFlowControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2Security4ACLClassFlowControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.6 sleV2Security4ACLClassFlowControlClassIndex OBJECT-TYPE SYNTAX IntClassIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of class" ::= { sleV2Security4ACLClassFlowControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.7 sleV2Security4ACLClassFlowControlFlowIndex OBJECT-TYPE SYNTAX IntFlowIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of flow in this class" ::= { sleV2Security4ACLClassFlowControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.8 sleV2Security4ACLClassFlowControlFlowID OBJECT-TYPE SYNTAX IntFlowIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of flow Refer to sleV2QoS4FlowIndex " ::= { sleV2Security4ACLClassFlowControl 8 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.9 sleV2Security4ACLClassFlowControlClassName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The class name of classFlow" ::= { sleV2Security4ACLClassFlowControl 9 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.3 sleV2Security4ACLClassFlowNotification OBJECT IDENTIFIER ::= { sleV2Security4ACLClassFlow 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.1 sleACLClassFlowAdded NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLClassFlowControlRequest, sleV2Security4ACLClassFlowControlTimeStamp, sleV2Security4ACLClassFlowControlReqResult, sleV2Security4ACLClassFlowControlClassName, sleV2Security4ACLClassFlowControlClassIndex, sleV2Security4ACLClassFlowID } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLClassFlowNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.2 sleACLClassFlowDeleted NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLClassFlowControlRequest, sleV2Security4ACLClassFlowControlTimeStamp, sleV2Security4ACLClassFlowControlReqResult, sleV2Security4ACLClassFlowControlClassIndex, sleV2Security4ACLClassFlowControlFlowIndex, sleV2Security4ACLClassFlowControlClassName } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLClassFlowNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.3 sleACLClassFlowAllDeleted NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLClassFlowControlRequest, sleV2Security4ACLClassFlowControlTimeStamp, sleV2Security4ACLClassFlowControlReqResult, sleV2Security4ACLClassFlowControlClassIndex } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLClassFlowNotification 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.3 sleV2Security4ACLClassPolicy OBJECT IDENTIFIER ::= { sleV2Security4ACLClass 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.3.1 sleV2Security4ACLClassPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2Security4ACLClassPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLClassPolicy 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1 sleV2Security4ACLClassPolicyEntry OBJECT-TYPE SYNTAX SleV2Security4ACLClassPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleV2Security4ACLClassIndex, sleV2Security4ACLClassPolicyIndex } ::= { sleV2Security4ACLClassPolicyTable 1 } SleV2Security4ACLClassPolicyEntry ::= SEQUENCE { sleV2Security4ACLClassPolicyIndex IntPolicyIndex, sleV2Security4ACLClassPolicyID IntPolicyIndex, sleV2Security4ACLClassPolicyName OctetName } -- 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.1 sleV2Security4ACLClassPolicyIndex OBJECT-TYPE SYNTAX IntPolicyIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the policy for the class" ::= { sleV2Security4ACLClassPolicyEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.2 sleV2Security4ACLClassPolicyID OBJECT-TYPE SYNTAX IntPolicyIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the policy" ::= { sleV2Security4ACLClassPolicyEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.3 sleV2Security4ACLClassPolicyName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the policy" ::= { sleV2Security4ACLClassPolicyEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.4 sleV2Security4ACLPolicy OBJECT IDENTIFIER ::= { sleV2SecurityACL 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1 sleV2Security4ACLPolicyInfo OBJECT IDENTIFIER ::= { sleV2Security4ACLPolicy 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.1 sleV2Security4ACLPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2Security4ACLPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL policy table." ::= { sleV2Security4ACLPolicyInfo 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1 sleV2Security4ACLPolicyEntry OBJECT-TYPE SYNTAX SleV2Security4ACLPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2Security4ACLPolicyIndex" INDEX { sleV2Security4ACLPolicyIndex } ::= { sleV2Security4ACLPolicyTable 1 } SleV2Security4ACLPolicyEntry ::= SEQUENCE { sleV2Security4ACLPolicyIndex IntPolicyIndex, sleV2Security4ACLPolicyName OctetName, sleV2Security4ACLPolicyFlowCnt Integer32, sleV2Security4ACLPolicyClassCnt Integer32, sleV2Security4ACLPolicyPriority INTEGER, sleV2Security4ACLPolicyMatchFlag IntPermit, sleV2Security4ACLPolicyNomatchFlag IntPermit } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.1 sleV2Security4ACLPolicyIndex OBJECT-TYPE SYNTAX IntPolicyIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of policy" ::= { sleV2Security4ACLPolicyEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.2 sleV2Security4ACLPolicyName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of policy" ::= { sleV2Security4ACLPolicyEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.3 sleV2Security4ACLPolicyFlowCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of flow that was included to policy" ::= { sleV2Security4ACLPolicyEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.4 sleV2Security4ACLPolicyClassCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of class that was included to policy" ::= { sleV2Security4ACLPolicyEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.5 sleV2Security4ACLPolicyPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), highest(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the policy low : default value " ::= { sleV2Security4ACLPolicyEntry 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.6 sleV2Security4ACLPolicyMatchFlag OBJECT-TYPE SYNTAX IntPermit MAX-ACCESS read-only STATUS current DESCRIPTION "The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow " ::= { sleV2Security4ACLPolicyEntry 6 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.7 sleV2Security4ACLPolicyNomatchFlag OBJECT-TYPE SYNTAX IntPermit MAX-ACCESS read-only STATUS current DESCRIPTION "The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow " ::= { sleV2Security4ACLPolicyEntry 7 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2 sleV2Security4ACLPolicyControl OBJECT IDENTIFIER ::= { sleV2Security4ACLPolicyInfo 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.1 sleV2Security4ACLPolicyControlRequest OBJECT-TYPE SYNTAX INTEGER { createPolicy(1), setPolicyInfo(2), setMatchAction(3), setNomatchAction(4), destroyPolicy(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2Security4ACLPolicyControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.2 sleV2Security4ACLPolicyControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2Security4ACLPolicyControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.3 sleV2Security4ACLPolicyControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2Security4ACLPolicyControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.4 sleV2Security4ACLPolicyControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2Security4ACLPolicyControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.5 sleV2Security4ACLPolicyControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2Security4ACLPolicyControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.6 sleV2Security4ACLPolicyControlIndex OBJECT-TYPE SYNTAX IntPolicyIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of policy" ::= { sleV2Security4ACLPolicyControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.7 sleV2Security4ACLPolicyControlName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-write STATUS current DESCRIPTION "The name of policy" ::= { sleV2Security4ACLPolicyControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.8 sleV2Security4ACLPolicyControlPriority OBJECT-TYPE SYNTAX IntRulePriority MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of the policy low : default " ::= { sleV2Security4ACLPolicyControl 8 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.9 sleV2Security4ACLPolicyControlMatchFlag OBJECT-TYPE SYNTAX IntPermit MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow " ::= { sleV2Security4ACLPolicyControl 9 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.10 sleV2Security4ACLPolicyControlNomatchFlag OBJECT-TYPE SYNTAX IntPermit MAX-ACCESS read-write STATUS current DESCRIPTION "The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow " ::= { sleV2Security4ACLPolicyControl 10 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.11 sleV2Security4ACLPolicyControlFlowID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index of flow" ::= { sleV2Security4ACLPolicyControl 11 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.12 sleV2Security4ACLPolicyControlClassID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index of class" ::= { sleV2Security4ACLPolicyControl 12 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.3 sleV2Security4ACLPolicyNotification OBJECT IDENTIFIER ::= { sleV2Security4ACLPolicyInfo 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.1 sleACLPolicyCreated NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyControlRequest, sleV2Security4ACLPolicyControlTimeStamp, sleV2Security4ACLPolicyControlReqResult, sleV2Security4ACLClassPolicyName, sleV2Security4ACLPolicyPriority, sleV2Security4ACLPolicyMatchFlag, sleV2Security4ACLPolicyNomatchFlag } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.2 sleACLPolicyInfoChanged NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyControlRequest, sleV2Security4ACLPolicyControlTimeStamp, sleV2Security4ACLPolicyControlReqResult, sleV2Security4ACLPolicyPriority } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.3 sleACLPolicyMatchActionChanged NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyControlRequest, sleV2Security4ACLPolicyControlTimeStamp, sleV2Security4ACLPolicyControlReqResult, sleV2Security4ACLPolicyMatchFlag } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyNotification 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.4 sleACLPolicyNomatchActionChanged NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyControlRequest, sleV2Security4ACLPolicyControlTimeStamp, sleV2Security4ACLPolicyControlReqResult, sleV2Security4ACLPolicyNomatchFlag } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyNotification 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.5 sleACLPolicyDestroyed NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyControlRequest, sleV2Security4ACLPolicyControlTimeStamp, sleV2Security4ACLPolicyControlReqResult, sleV2Security4ACLPolicyControlIndex } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyNotification 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2 sleV2Security4ACLPolicyFlowClass OBJECT IDENTIFIER ::= { sleV2Security4ACLPolicy 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.1 sleV2Security4ACLPolicyFlowClassTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2Security4ACLPolicyFlowClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL policy flow class table." ::= { sleV2Security4ACLPolicyFlowClass 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1 sleV2Security4ACLPolicyFlowClassEntry OBJECT-TYPE SYNTAX SleV2Security4ACLPolicyFlowClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2Security4ACLPolicyIndex, sleV2Security4ACLPolicyFlowClassIndex" INDEX { sleV2Security4ACLPolicyIndex, sleV2Security4ACLPolicyFlowClassIndex } ::= { sleV2Security4ACLPolicyFlowClassTable 1 } SleV2Security4ACLPolicyFlowClassEntry ::= SEQUENCE { sleV2Security4ACLPolicyFlowClassIndex IntFlowIndex, sleV2Security4ACLPolicyFlowClassType IntFlowOrClass, sleV2Security4ACLPolicyFlowClassID IntFlowIndex, sleV2Security4ACLPolicyFlowClassName OctetName } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.1 sleV2Security4ACLPolicyFlowClassIndex OBJECT-TYPE SYNTAX IntFlowIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of flow or class in policy" ::= { sleV2Security4ACLPolicyFlowClassEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.2 sleV2Security4ACLPolicyFlowClassType OBJECT-TYPE SYNTAX IntFlowOrClass MAX-ACCESS read-only STATUS current DESCRIPTION "The flag about flow or class" ::= { sleV2Security4ACLPolicyFlowClassEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.3 sleV2Security4ACLPolicyFlowClassID OBJECT-TYPE SYNTAX IntFlowIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of class or flow" ::= { sleV2Security4ACLPolicyFlowClassEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.4 sleV2Security4ACLPolicyFlowClassName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of class or flow" ::= { sleV2Security4ACLPolicyFlowClassEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2 sleV2Security4ACLPolicyFlowClassControl OBJECT IDENTIFIER ::= { sleV2Security4ACLPolicyFlowClass 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.1 sleV2Security4ACLPolicyFlowClassControlRequest OBJECT-TYPE SYNTAX INTEGER { addFlowClass(1), deleteFlowClass(2), deleteAllFlow(3), deleteAllClass(4), deleteAllFlowClass(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2Security4ACLPolicyFlowClassControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.2 sleV2Security4ACLPolicyFlowClassControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-write STATUS current DESCRIPTION "The status of user command" ::= { sleV2Security4ACLPolicyFlowClassControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.3 sleV2Security4ACLPolicyFlowClassControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2Security4ACLPolicyFlowClassControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.4 sleV2Security4ACLPolicyFlowClassControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2Security4ACLPolicyFlowClassControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.5 sleV2Security4ACLPolicyFlowClassControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-write STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2Security4ACLPolicyFlowClassControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.6 sleV2Security4ACLPolicyFlowClassControlPolicyIndex OBJECT-TYPE SYNTAX IntPolicyIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of Policy" ::= { sleV2Security4ACLPolicyFlowClassControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.7 sleV2Security4ACLPolicyFlowClassControlIndex OBJECT-TYPE SYNTAX IntFlowIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of flow or class in this policy" ::= { sleV2Security4ACLPolicyFlowClassControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.8 sleV2Security4ACLPolicyFlowClassControlType OBJECT-TYPE SYNTAX IntFlowOrClass MAX-ACCESS read-write STATUS current DESCRIPTION "The type of flow or class" ::= { sleV2Security4ACLPolicyFlowClassControl 8 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.9 sleV2Security4ACLPolicyFlowClassControlFlowID OBJECT-TYPE SYNTAX IntFlowIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of flow Available according to sleV2QoS4PolicyFlowClassControlType. " ::= { sleV2Security4ACLPolicyFlowClassControl 9 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.10 sleV2Security4ACLPolicyFlowClassControlClassID OBJECT-TYPE SYNTAX IntClassIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of class Available according to sleV2QoS4PolicyFlowClassControlType. " ::= { sleV2Security4ACLPolicyFlowClassControl 10 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.3 sleV2Security4ACLPolicyFlowClassNotification OBJECT IDENTIFIER ::= { sleV2Security4ACLPolicyFlowClass 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.1 sleACLPolicyFlowAdded NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyFlowClassControlRequest, sleV2Security4ACLPolicyFlowClassControlTimeStamp, sleV2Security4ACLPolicyFlowClassControlReqResult, sleV2Security4ACLPolicyFlowClassType, sleV2Security4ACLPolicyFlowClassID } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyFlowClassNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.2 sleACLPolicyFlowDeleted NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyFlowClassControlRequest, sleV2Security4ACLPolicyFlowClassControlTimeStamp, sleV2Security4ACLPolicyFlowClassControlReqResult, sleV2Security4ACLPolicyFlowClassControlPolicyIndex, sleV2Security4ACLPolicyFlowClassControlIndex } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyFlowClassNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.3 sleACLPolicyAllFlowDeleted NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyFlowClassControlRequest, sleV2Security4ACLPolicyFlowClassControlTimeStamp, sleV2Security4ACLPolicyFlowClassControlReqResult, sleV2Security4ACLPolicyFlowClassControlPolicyIndex } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyFlowClassNotification 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.4 sleACLPolicyAllClassDeleted NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyFlowClassControlRequest, sleV2Security4ACLPolicyFlowClassControlTimeStamp, sleV2Security4ACLPolicyFlowClassControlReqResult, sleV2Security4ACLPolicyFlowClassControlPolicyIndex } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyFlowClassNotification 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.5 sleACLPolicyAllFlowClassDeleted NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLPolicyFlowClassControlRequest, sleV2Security4ACLPolicyFlowClassControlTimeStamp, sleV2Security4ACLPolicyFlowClassControlReqResult, sleV2Security4ACLPolicyFlowClassControlPolicyIndex } STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLPolicyFlowClassNotification 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.5 sleV2Security4ACLGroup OBJECT IDENTIFIER ::= { sleV2SecurityACL 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1 sleV2Security4ACLGroupIf OBJECT IDENTIFIER ::= { sleV2Security4ACLGroup 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.1 sleV2Security4ACLGroupIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2Security4ACLGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleV2Security4ACLGroupIf 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1 sleV2Security4ACLGroupIfEntry OBJECT-TYPE SYNTAX SleV2Security4ACLGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleV2Security4ACLGroupIfindex, sleV2Security4ACLGroupIfType } ::= { sleV2Security4ACLGroupIfTable 1 } SleV2Security4ACLGroupIfEntry ::= SEQUENCE { sleV2Security4ACLGroupIfindex Integer32, sleV2Security4ACLGroupIfType INTEGER, sleV2Security4ACLGroupIfName OCTET STRING, sleV2Security4ACLGroupIfPriority INTEGER } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.1 sleV2Security4ACLGroupIfindex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "interface index" ::= { sleV2Security4ACLGroupIfEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.2 sleV2Security4ACLGroupIfType OBJECT-TYPE SYNTAX INTEGER { ip(3), mac(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The access-list type" ::= { sleV2Security4ACLGroupIfEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.3 sleV2Security4ACLGroupIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The access-list name" ::= { sleV2Security4ACLGroupIfEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.4 sleV2Security4ACLGroupIfPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), highest(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The policy priority" ::= { sleV2Security4ACLGroupIfEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2 sleV2Security4ACLGroupIfControl OBJECT IDENTIFIER ::= { sleV2Security4ACLGroupIf 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.1 sleV2Security4ACLGroupIfControlRequest OBJECT-TYPE SYNTAX INTEGER { setSecurityAclGroupIfProfile(1), delSecurityAclGroupIfProfile(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2Security4ACLGroupIfControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.2 sleV2Security4ACLGroupIfControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-write STATUS current DESCRIPTION "The status of user command" ::= { sleV2Security4ACLGroupIfControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.3 sleV2Security4ACLGroupIfControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2Security4ACLGroupIfControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.4 sleV2Security4ACLGroupIfControlReqResult OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2Security4ACLGroupIfControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.5 sleV2Security4ACLGroupIfControlTimeStamp OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-write STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2Security4ACLGroupIfControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.6 sleV2Security4ACLGroupIfConrolIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "interface index" ::= { sleV2Security4ACLGroupIfControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.7 sleV2Security4ACLGroupIfControlType OBJECT-TYPE SYNTAX INTEGER { ip(3), mac(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The access-list type" ::= { sleV2Security4ACLGroupIfControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.8 sleV2Security4ACLGroupIfControlName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The access-list name" ::= { sleV2Security4ACLGroupIfControl 8 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.9 sleV2Security4ACLGroupIfControlPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), highest(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Integer 1: low(1) 2: medium(2) 3: high(3) 4: highest(4) The policy priority " ::= { sleV2Security4ACLGroupIfControl 9 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.3 sleV2SecurityACLGroupIfNotification OBJECT IDENTIFIER ::= { sleV2Security4ACLGroupIf 3 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.1 sleV2Security4ACLGroupIfProfileAdd NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLGroupIfControlRequest, sleV2Security4ACLGroupIfControlReqResult, sleV2Security4ACLGroupIfControlTimeStamp, sleV2Security4ACLGroupIfControlName } STATUS current DESCRIPTION "setSecurityACLGroupIfProfile" ::= { sleV2SecurityACLGroupIfNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.2 sleV2Security4ACLGroupIfProfileDelete NOTIFICATION-TYPE OBJECTS { sleV2Security4ACLGroupIfControlRequest, sleV2Security4ACLGroupIfControlReqResult, sleV2Security4ACLGroupIfControlTimeStamp, sleV2Security4ACLGroupIfConrolIndex, sleV2Security4ACLGroupIfControlType } STATUS current DESCRIPTION "delSecurityACLGroupIfProfile" ::= { sleV2SecurityACLGroupIfNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.6 sleV2SecuritySACL OBJECT IDENTIFIER ::= { sleVSecurity4 6 } -- 1.3.6.1.4.1.6296.102.7.2.6.1 sleV2SecuritySACLTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2SecuritySACLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL table." ::= { sleV2SecuritySACL 1 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1 sleV2SecuritySACLEntry OBJECT-TYPE SYNTAX SleV2SecuritySACLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2SecuritySACLName" INDEX { sleV2SecuritySACLName } ::= { sleV2SecuritySACLTable 1 } SleV2SecuritySACLEntry ::= SEQUENCE { sleV2SecuritySACLName OctetName, sleV2SecuritySACLSrcIpaddr IpAddress, sleV2SecuritySACLSrcPrefixLength Integer32, sleV2SecuritySACLDstIpAddr IpAddress, sleV2SecuritySACLDstPrefixLength Integer32, sleV2SecuritySACLProtocolType IntProtocolType, sleV2SecuritySACLTcpflag BITS, sleV2SecuritySACLSrcL4Port IntL4Port, sleV2SecuritySACLDstL4Port IntL4Port, sleV2SecuritySACLIcmpType IntProtocolType, sleV2SecuritySACLIcmpCode IntProtocolType, sleV2SecuritySACLPriority INTEGER, sleV2SecuritySACLMatchAction INTEGER, sleV2SecuritySACLNomatchAction INTEGER } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.1 sleV2SecuritySACLName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-only STATUS current DESCRIPTION "Name of this ACL rule" ::= { sleV2SecuritySACLEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.2 sleV2SecuritySACLSrcIpaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to match against the packetĄŻs source IP address" ::= { sleV2SecuritySACLEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.3 sleV2SecuritySACLSrcPrefixLength OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Subnet mask." ::= { sleV2SecuritySACLEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.4 sleV2SecuritySACLDstIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to match against the packetĄŻs destination IP address" ::= { sleV2SecuritySACLEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.5 sleV2SecuritySACLDstPrefixLength OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Subnet mask." ::= { sleV2SecuritySACLEntry 5 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.6 sleV2SecuritySACLProtocolType OBJECT-TYPE SYNTAX IntProtocolType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP protocol The flat internet protocol is from sleV2SecuritySACLTcpflag to sleV2SecuritySACLIcmpCode If the value is tcp(6) or udp(17), From sleV2SecuritySACLTcpflag to sleV2SecuritySACLDstL4Port value is available If the value is icmp(1), The value of sleV2SecuritySACLIcmpType and sleV2SecuritySACLIcmpCode is available The value of -1 means any(not set) " ::= { sleV2SecuritySACLEntry 6 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.7 sleV2SecuritySACLTcpflag OBJECT-TYPE SYNTAX BITS { reserv(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "TCP flag" ::= { sleV2SecuritySACLEntry 7 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.8 sleV2SecuritySACLSrcL4Port OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The source service port number (only valid for TCP or UDP packet).." ::= { sleV2SecuritySACLEntry 8 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.9 sleV2SecuritySACLDstL4Port OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-only STATUS current DESCRIPTION "The destination service port number (only valid for TCP or UDP packet). " ::= { sleV2SecuritySACLEntry 9 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.10 sleV2SecuritySACLIcmpType OBJECT-TYPE SYNTAX IntProtocolType MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of ICMP message The value of -1 means any(not set)" ::= { sleV2SecuritySACLEntry 10 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.11 sleV2SecuritySACLIcmpCode OBJECT-TYPE SYNTAX IntProtocolType MAX-ACCESS read-only STATUS current DESCRIPTION "The code of ICMP message The value of -1 means any(not set)" ::= { sleV2SecuritySACLEntry 11 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.12 sleV2SecuritySACLPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), highest(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of ICMP message The value of -1 means any(not set) " ::= { sleV2SecuritySACLEntry 12 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.13 sleV2SecuritySACLMatchAction OBJECT-TYPE SYNTAX INTEGER { none(0), permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Action for packets that match against this ACL rule." ::= { sleV2SecuritySACLEntry 13 } -- 1.3.6.1.4.1.6296.102.7.2.6.1.1.14 sleV2SecuritySACLNomatchAction OBJECT-TYPE SYNTAX INTEGER { none(0), permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Action for packets that donĄŻt match against this ACL rule." ::= { sleV2SecuritySACLEntry 14 } -- 1.3.6.1.4.1.6296.102.7.2.6.2 sleV2SecuritySACLControl OBJECT IDENTIFIER ::= { sleV2SecuritySACL 2 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.1 sleV2SecuritySACLControlRequest OBJECT-TYPE SYNTAX INTEGER { createSAclRule(1), destroySAclRule(2), destroyAllSAclRule(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2SecuritySACLControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.2 sleV2SecuritySACLControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2SecuritySACLControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.3 sleV2SecuritySACLControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2SecuritySACLControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.4 sleV2SecuritySACLControlTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2SecuritySACLControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.5 sleV2SecuritySACLControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2SecuritySACLControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.6 sleV2SecuritySACLControlName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-write STATUS current DESCRIPTION "Name of this ACL rule" ::= { sleV2SecuritySACLControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.7 sleV2SecuritySACLControlSrcIpaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to match against the packetĄŻs source IP address" ::= { sleV2SecuritySACLControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.8 sleV2SecuritySACLControlSrcPrefixLength OBJECT-TYPE SYNTAX IntIpAddrMask MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask." ::= { sleV2SecuritySACLControl 8 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.9 sleV2SecuritySACLControlDstIpaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to match against the packetĄŻs destination IP address" ::= { sleV2SecuritySACLControl 9 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.10 sleV2SecuritySACLControlDstPrefixLength OBJECT-TYPE SYNTAX IntIpAddrMask MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask." ::= { sleV2SecuritySACLControl 10 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.11 sleV2SecuritySACLControlProtocolType OBJECT-TYPE SYNTAX IntProtocolType MAX-ACCESS read-write STATUS current DESCRIPTION "The IP protocol type value" ::= { sleV2SecuritySACLControl 11 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.12 sleV2SecuritySACLControlTcpflag OBJECT-TYPE SYNTAX BITS { reserv(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "TCP flag" ::= { sleV2SecuritySACLControl 12 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.13 sleV2SecuritySACLControlSrcL4Port OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The source service port number (only valid for TCP or UDP packet).." ::= { sleV2SecuritySACLControl 13 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.14 sleV2SecuritySACLControlDstL4Port OBJECT-TYPE SYNTAX IntL4Port MAX-ACCESS read-write STATUS current DESCRIPTION "The destination service port number (only valid for TCP or UDP packet). " ::= { sleV2SecuritySACLControl 14 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.15 sleV2SecuritySACLControlIcmpType OBJECT-TYPE SYNTAX IntProtocolType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of ICMP message The value of -1 means any(not set) " ::= { sleV2SecuritySACLControl 15 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.16 sleV2SecuritySACLControlIcmpCode OBJECT-TYPE SYNTAX IntProtocolType MAX-ACCESS read-write STATUS current DESCRIPTION "The code of ICMP message The value of -1 means any(not set) " ::= { sleV2SecuritySACLControl 16 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.17 sleV2SecuritySACLControlPriority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), highest(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority of this ACL rule)" ::= { sleV2SecuritySACLControl 17 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.18 sleV2SecuritySACLControlMatchAction OBJECT-TYPE SYNTAX INTEGER { none(0), permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Action for packets that match against this ACL rule." ::= { sleV2SecuritySACLControl 18 } -- 1.3.6.1.4.1.6296.102.7.2.6.2.19 sleV2SecuritySACLControlNomatchAction OBJECT-TYPE SYNTAX INTEGER { none(0), permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Action for packets that donĄŻt match against this ACL rule." ::= { sleV2SecuritySACLControl 19 } -- 1.3.6.1.4.1.6296.102.7.2.6.3 sleV2SecuritySACLNotification OBJECT IDENTIFIER ::= { sleV2SecuritySACL 3 } -- 1.3.6.1.4.1.6296.102.7.2.6.3.1 sleSACLCreated NOTIFICATION-TYPE OBJECTS { sleV2SecuritySACLControlRequest, sleV2SecuritySACLControlTimeStamp, sleV2SecuritySACLControlReqResult, sleV2SecuritySACLSrcIpaddr, sleV2SecuritySACLSrcPrefixLength, sleV2SecuritySACLDstIpAddr, sleV2SecuritySACLDstPrefixLength, sleV2SecuritySACLProtocolType, sleV2SecuritySACLTcpflag, sleV2SecuritySACLIcmpType, sleV2SecuritySACLIcmpCode, sleV2SecuritySACLPriority, sleV2SecuritySACLMatchAction, sleV2SecuritySACLNomatchAction, sleV2SecuritySACLSrcL4Port, sleV2SecuritySACLDstL4Port } STATUS current DESCRIPTION "Description." ::= { sleV2SecuritySACLNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.6.3.2 sleSACLDestroyed NOTIFICATION-TYPE OBJECTS { sleV2SecuritySACLControlRequest, sleV2SecuritySACLControlTimeStamp, sleV2SecuritySACLControlName, sleV2SecuritySACLControlReqResult } STATUS current DESCRIPTION "Description." ::= { sleV2SecuritySACLNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.6.3.3 sleSACLAllDestroyed NOTIFICATION-TYPE OBJECTS { sleV2SecuritySACLControlRequest, sleV2SecuritySACLControlTimeStamp, sleV2SecuritySACLControlReqResult } STATUS current DESCRIPTION "Description." ::= { sleV2SecuritySACLNotification 3 } -- 1.3.6.1.4.1.6296.102.7.2.7 sleV2SecurityACLStatistics OBJECT IDENTIFIER ::= { sleVSecurity4 7 } -- 1.3.6.1.4.1.6296.102.7.2.7.1 sleV2SecurityACLStatisticsBase OBJECT IDENTIFIER ::= { sleV2SecurityACLStatistics 1 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.1 sleV2SecurityACLStatisticsBaseInfo OBJECT IDENTIFIER ::= { sleV2SecurityACLStatisticsBase 1 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.1.1 sleV2SecurityACLStatisticsSyslogStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ACL statistics syslog status" ::= { sleV2SecurityACLStatisticsBaseInfo 1 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.2 sleV2SecurityACLStatisticsBaseControl OBJECT IDENTIFIER ::= { sleV2SecurityACLStatisticsBase 2 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.2.1 sleV2SecurityACLStatisticsBaseControlRequest OBJECT-TYPE SYNTAX INTEGER { aclSyslogModeChange(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2SecurityACLStatisticsBaseControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.2.2 sleV2SecurityACLStatisticsBaseControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2SecurityACLStatisticsBaseControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.2.3 sleV2SecurityACLStatisticsBaseControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2SecurityACLStatisticsBaseControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.2.4 sleV2SecurityACLStatisticsBaseControlTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2SecurityACLStatisticsBaseControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.2.5 sleV2SecurityACLStatisticsBaseControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2SecurityACLStatisticsBaseControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.2.6 sleV2SecurityACLStatisticsBaseControlSyslogMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL statistics syslog mode" ::= { sleV2SecurityACLStatisticsBaseControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.3 sleV2SecurityACLStatisticsBaseNotification OBJECT IDENTIFIER ::= { sleV2SecurityACLStatisticsBase 3 } -- 1.3.6.1.4.1.6296.102.7.2.7.1.3.1 sleV2SecurityACLStatisticsSyslogModeChanged NOTIFICATION-TYPE OBJECTS { sleV2SecurityACLStatisticsBaseControlRequest, sleV2SecurityACLStatisticsBaseControlTimeStamp, sleV2SecurityACLStatisticsBaseControlReqResult, sleV2SecurityACLStatisticsBaseControlSyslogMode } STATUS current DESCRIPTION "Description." ::= { sleV2SecurityACLStatisticsBaseNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.7.2 sleV2SecurityACLStatisticsPacketHistory OBJECT IDENTIFIER ::= { sleV2SecurityACLStatistics 2 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.1 sleV2SecurityACLPacketCountTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2SecurityACLPacketCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL packet count table." ::= { sleV2SecurityACLStatisticsPacketHistory 1 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.1.1 sleV2SecurityACLPacketCountEntry OBJECT-TYPE SYNTAX SleV2SecurityACLPacketCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2SecuritySACLName" INDEX { sleV2SecuritySACLName } ::= { sleV2SecurityACLPacketCountTable 1 } SleV2SecurityACLPacketCountEntry ::= SEQUENCE { sleV2SecurityACLTotalPacket Counter64 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.1.1.1 sleV2SecurityACLTotalPacket OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "ACL total packet" ::= { sleV2SecurityACLPacketCountEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.2 sleV2SecurityACLSrcHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2SecurityACLSrcHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL source history table." ::= { sleV2SecurityACLStatisticsPacketHistory 2 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.2.1 sleV2SecurityACLSrcHistoryEntry OBJECT-TYPE SYNTAX SleV2SecurityACLSrcHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2SecuritySACLName, sleV2SecurityACLSrcHistoryIndex" INDEX { sleV2SecuritySACLName, sleV2SecurityACLSrcHistoryIndex } ::= { sleV2SecurityACLSrcHistoryTable 1 } SleV2SecurityACLSrcHistoryEntry ::= SEQUENCE { sleV2SecurityACLSrcHistoryIndex Integer32, sleV2SecurityACLSrcHistoryIpAddr IpAddress } -- 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.1 sleV2SecurityACLSrcHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "The ACL index." ::= { sleV2SecurityACLSrcHistoryEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.2 sleV2SecurityACLSrcHistoryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The ACl IP address" ::= { sleV2SecurityACLSrcHistoryEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.3 sleV2SecurityACLStatisticsControl OBJECT IDENTIFIER ::= { sleV2SecurityACLStatisticsPacketHistory 3 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.3.1 sleV2SecurityACLStatisticsControlRequest OBJECT-TYPE SYNTAX INTEGER { clearAruleStatus(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2SecurityACLStatisticsControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.3.2 sleV2SecurityACLStatisticsControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2SecurityACLStatisticsControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.3.3 sleV2SecurityACLStatisticsControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2SecurityACLStatisticsControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.3.4 sleV2SecurityACLStatisticsControlTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2SecurityACLStatisticsControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.3.5 sleV2SecurityACLStatisticsControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2SecurityACLStatisticsControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.3.6 sleV2SecurityACLStatisticsControlName OBJECT-TYPE SYNTAX OctetName MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL statistics name" ::= { sleV2SecurityACLStatisticsControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.4 sleV2SecurityACLStatisticsNotification OBJECT IDENTIFIER ::= { sleV2SecurityACLStatisticsPacketHistory 4 } -- 1.3.6.1.4.1.6296.102.7.2.7.2.4.1 sleV2SecurityACLStatisticsCleared NOTIFICATION-TYPE OBJECTS { sleV2SecurityACLStatisticsControlRequest, sleV2SecurityACLStatisticsControlTimeStamp, sleV2SecurityACLStatisticsControlReqResult, sleV2SecurityACLStatisticsControlName } STATUS current DESCRIPTION "Description." ::= { sleV2SecurityACLStatisticsNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.8 sleV2CpuPacketFilter OBJECT IDENTIFIER ::= { sleVSecurity4 8 } -- 1.3.6.1.4.1.6296.102.7.2.8.1 sleV2CpuPacketFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2CpuPacketFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "cpu packet filter table." ::= { sleV2CpuPacketFilter 1 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1 sleV2CpuPacketFilterEntry OBJECT-TYPE SYNTAX SleV2CpuPacketFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2CpuPacketFilterIndex" INDEX { sleV2CpuPacketFilterIndex } ::= { sleV2CpuPacketFilterTable 1 } SleV2CpuPacketFilterEntry ::= SEQUENCE { sleV2CpuPacketFilterIndex Integer32, sleV2CpuPacketFilterName OCTET STRING, sleV2CpuPacketFilterCreationTime Counter32, sleV2CpuPacketFilterElapsedtimeAfterClear Counter32, sleV2CpuPacketFilterStage INTEGER, sleV2CpuPacketFilterPriority Integer32, sleV2CpuPacketFilterAction INTEGER, sleV2CpuPacketFilterActionRateLimit Integer32, sleV2CpuPacketFilterActionBurstSize Integer32, sleV2CpuPacketFilterActionTpid Integer32, sleV2CpuPacketFilterActionPcp Integer32, sleV2CpuPacketFilterActionVid Integer32, sleV2CpuPacketFilterActionTagPosition Integer32 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.1 sleV2CpuPacketFilterIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of cpu packet filter" ::= { sleV2CpuPacketFilterEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.2 sleV2CpuPacketFilterName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The name of cpu packet filter" ::= { sleV2CpuPacketFilterEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.3 sleV2CpuPacketFilterCreationTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The creation time. (unit : sec)" ::= { sleV2CpuPacketFilterEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.4 sleV2CpuPacketFilterElapsedtimeAfterClear OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time after clear (unit : sec)" ::= { sleV2CpuPacketFilterEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.5 sleV2CpuPacketFilterStage OBJECT-TYPE SYNTAX INTEGER { cpuingress(1), cpuegress(2), portrx(3), porttx(4), vlanAssigned(5), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The stage of cpu packet filter." ::= { sleV2CpuPacketFilterEntry 5 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.6 sleV2CpuPacketFilterPriority OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of cpu packet filter." ::= { sleV2CpuPacketFilterEntry 6 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.7 sleV2CpuPacketFilterAction OBJECT-TYPE SYNTAX INTEGER { drop(1), permit(2), rateLimit(3), pass(4), dot1q(5), dot1qAttach(6), dot1qDetach(7), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove" ::= { sleV2CpuPacketFilterEntry 7 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.8 sleV2CpuPacketFilterActionRateLimit OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The allowed-packet count per second." ::= { sleV2CpuPacketFilterEntry 8 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.9 sleV2CpuPacketFilterActionBurstSize OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The burst-allowed-packet count." ::= { sleV2CpuPacketFilterEntry 9 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.10 sleV2CpuPacketFilterActionTpid OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Action TPID The value 65535(0xffff) means any." ::= { sleV2CpuPacketFilterEntry 10 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.11 sleV2CpuPacketFilterActionPcp OBJECT-TYPE SYNTAX Integer32 (0..7 | 255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Action PCP. The value 255(0xff) means any." ::= { sleV2CpuPacketFilterEntry 11 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.12 sleV2CpuPacketFilterActionVid OBJECT-TYPE SYNTAX Integer32 (0 | 1..4094 | 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Action VID The value 65535(0xffff) means any." ::= { sleV2CpuPacketFilterEntry 12 } -- 1.3.6.1.4.1.6296.102.7.2.8.1.1.13 sleV2CpuPacketFilterActionTagPosition OBJECT-TYPE SYNTAX Integer32 (0 | 1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The Action tag position. 1 s-vlan 2 c-vlan" ::= { sleV2CpuPacketFilterEntry 13 } -- 1.3.6.1.4.1.6296.102.7.2.8.2 sleV2CpuPacketFilterMatchTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2CpuPacketFilterMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "cpu packet filter match table." ::= { sleV2CpuPacketFilter 2 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1 sleV2CpuPacketFilterMatchEntry OBJECT-TYPE SYNTAX SleV2CpuPacketFilterMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "key: sleV2CpuPacketFilterIndex, sleV2CpuPacketFilterMatchIndex" INDEX { sleV2CpuPacketFilterIndex, sleV2CpuPacketFilterMatchIndex } ::= { sleV2CpuPacketFilterMatchTable 1 } SleV2CpuPacketFilterMatchEntry ::= SEQUENCE { sleV2CpuPacketFilterMatchIndex Integer32, sleV2CpuPacketFilterMatchType BITS, sleV2CpuPacketFilterMatchCos OCTET STRING, sleV2CpuPacketFilterMatchPort OCTET STRING, sleV2CpuPacketFilterMatchVidmap OCTET STRING, sleV2CpuPacketFilterMatchTagPosition Integer32, sleV2CpuPacketFilterMatchTpid Integer32, sleV2CpuPacketFilterMatchPcp Integer32, sleV2CpuPacketFilterMatchVid Integer32, sleV2CpuPacketFilterMatchOffset Integer32, sleV2CpuPacketFilterMatchLength Integer32, sleV2CpuPacketFilterMatchData OCTET STRING, sleV2CpuPacketFilterMatchMask OCTET STRING, sleV2CpuPacketFilterMatchDesc OCTET STRING } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.1 sleV2CpuPacketFilterMatchIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The match entry Index" ::= { sleV2CpuPacketFilterMatchEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.2 sleV2CpuPacketFilterMatchType OBJECT-TYPE SYNTAX BITS { vid(0), cos(1), port(2), offset(3), dot1q(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The match classifiter type." ::= { sleV2CpuPacketFilterMatchEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.3 sleV2CpuPacketFilterMatchCos OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The matched CoS Queue." ::= { sleV2CpuPacketFilterMatchEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.4 sleV2CpuPacketFilterMatchPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The matched port index." ::= { sleV2CpuPacketFilterMatchEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.5 sleV2CpuPacketFilterMatchVidmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The matched VID." ::= { sleV2CpuPacketFilterMatchEntry 5 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.6 sleV2CpuPacketFilterMatchTagPosition OBJECT-TYPE SYNTAX Integer32 (0 | 1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The matched tag position." ::= { sleV2CpuPacketFilterMatchEntry 6 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.7 sleV2CpuPacketFilterMatchTpid OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The matched TPID." ::= { sleV2CpuPacketFilterMatchEntry 7 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.8 sleV2CpuPacketFilterMatchPcp OBJECT-TYPE SYNTAX Integer32 (0..7 | 255) MAX-ACCESS read-only STATUS current DESCRIPTION "The matched PCP" ::= { sleV2CpuPacketFilterMatchEntry 8 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.9 sleV2CpuPacketFilterMatchVid OBJECT-TYPE SYNTAX Integer32 (0 | 1..4094 | 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The matched VID" ::= { sleV2CpuPacketFilterMatchEntry 9 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.10 sleV2CpuPacketFilterMatchOffset OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The matched offset" ::= { sleV2CpuPacketFilterMatchEntry 10 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.11 sleV2CpuPacketFilterMatchLength OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The matched Length" ::= { sleV2CpuPacketFilterMatchEntry 11 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.12 sleV2CpuPacketFilterMatchData OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The matched data. (HEX string)" ::= { sleV2CpuPacketFilterMatchEntry 12 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.13 sleV2CpuPacketFilterMatchMask OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The matched mask. (HEX string)" ::= { sleV2CpuPacketFilterMatchEntry 13 } -- 1.3.6.1.4.1.6296.102.7.2.8.2.1.14 sleV2CpuPacketFilterMatchDesc OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The matched Description" ::= { sleV2CpuPacketFilterMatchEntry 14 } -- 1.3.6.1.4.1.6296.102.7.2.8.3 sleV2CpuPacketFilterControl OBJECT IDENTIFIER ::= { sleV2CpuPacketFilter 3 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.1 sleV2CpuPacketFilterControlRequest OBJECT-TYPE SYNTAX INTEGER { addCpuPktFilter(1), delCpuPktfilter(2), setAction(3), addMatch(4), delMatch(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2CpuPacketFilterControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.2 sleV2CpuPacketFilterControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2CpuPacketFilterControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.3 sleV2CpuPacketFilterControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2CpuPacketFilterControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.4 sleV2CpuPacketFilterControlTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2CpuPacketFilterControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.5 sleV2CpuPacketFilterControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2CpuPacketFilterControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.6 sleV2CpuPacketFilterControlIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The match entry Index" ::= { sleV2CpuPacketFilterControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.7 sleV2CpuPacketFilterControlName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Cpu packet filter name." ::= { sleV2CpuPacketFilterControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.8 sleV2CpuPacketFilterControlStage OBJECT-TYPE SYNTAX INTEGER { cpuingress(1), cpuegress(2), portrx(3), porttx(4), vlanAssigned(5), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The stage of cpu packet filter." ::= { sleV2CpuPacketFilterControl 8 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.9 sleV2CpuPacketFilterControlPriority OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of cpu packet filter." ::= { sleV2CpuPacketFilterControl 9 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.10 sleV2CpuPacketFilterControlAction OBJECT-TYPE SYNTAX INTEGER { drop(1), permit(2), rateLimit(3), pass(4), dot1q(5), dot1qAttach(6), dot1qDetach(7), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove" ::= { sleV2CpuPacketFilterControl 10 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.11 sleV2CpuPacketFilterControlActionRateLimit OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The allowed-packet count per second." ::= { sleV2CpuPacketFilterControl 11 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.12 sleV2CpuPacketFilterControlActionBurstSize OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The burst-allowed-packet count." ::= { sleV2CpuPacketFilterControl 12 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.13 sleV2CpuPacketFilterControlActionTpid OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The Action TPID The value 65535(0xffff) means any. " ::= { sleV2CpuPacketFilterControl 13 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.14 sleV2CpuPacketFilterControlActionPcp OBJECT-TYPE SYNTAX Integer32 (0..7 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Action PCP. The value 255(0xff) means any. " ::= { sleV2CpuPacketFilterControl 14 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.15 sleV2CpuPacketFilterControlActionVid OBJECT-TYPE SYNTAX Integer32 (0 | 1..4094 | 65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The Action VID The value 65535(0xffff) means any. " ::= { sleV2CpuPacketFilterControl 15 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.16 sleV2CpuPacketFilterControlActionTagPosition OBJECT-TYPE SYNTAX Integer32 (0 | 1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The Action tag position. 1: S-vlan 2: C-vlan M2200 uses only 1 and 2. " ::= { sleV2CpuPacketFilterControl 16 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.17 sleV2CpuPacketFilterControlMatchType OBJECT-TYPE SYNTAX BITS { vid(0), cos(1), port(2), offset(3), dot1q(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The match classifiter type." ::= { sleV2CpuPacketFilterControl 17 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.18 sleV2CpuPacketFilterControlMatchCos OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The matched CoS Queue. M2200 doesn't use " ::= { sleV2CpuPacketFilterControl 18 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.19 sleV2CpuPacketFilterControlMatchPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The matched port index." ::= { sleV2CpuPacketFilterControl 19 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.20 sleV2CpuPacketFilterControlMatchVidmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The matched VID M2200 doesn't use " ::= { sleV2CpuPacketFilterControl 20 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.21 sleV2CpuPacketFilterControlMatchTagPosition OBJECT-TYPE SYNTAX Integer32 (0 | 1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The matched tag position M2200 doesn't use " ::= { sleV2CpuPacketFilterControl 21 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.22 sleV2CpuPacketFilterControlMatchTpid OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The matched TPID." ::= { sleV2CpuPacketFilterControl 22 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.23 sleV2CpuPacketFilterControlMatchPcp OBJECT-TYPE SYNTAX Integer32 (0..7 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "The matched PCP" ::= { sleV2CpuPacketFilterControl 23 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.24 sleV2CpuPacketFilterControlMatchVid OBJECT-TYPE SYNTAX Integer32 (0 | 1..4094 | 65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The matched VID" ::= { sleV2CpuPacketFilterControl 24 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.25 sleV2CpuPacketFilterControlMatchOffset OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "The matched offset" ::= { sleV2CpuPacketFilterControl 25 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.26 sleV2CpuPacketFilterControlMatchLength OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The matched Length" ::= { sleV2CpuPacketFilterControl 26 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.27 sleV2CpuPacketFilterControlMatchData OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "he matched data. (HEX string)" ::= { sleV2CpuPacketFilterControl 27 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.28 sleV2CpuPacketFilterControlMatchMask OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The matched mask. (HEX string)" ::= { sleV2CpuPacketFilterControl 28 } -- 1.3.6.1.4.1.6296.102.7.2.8.3.29 sleV2CpuPacketFilterControlMatchDesc OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The matched Description" ::= { sleV2CpuPacketFilterControl 29 } -- 1.3.6.1.4.1.6296.102.7.2.8.4 sleV2CpuPacketFilterNotification OBJECT IDENTIFIER ::= { sleV2CpuPacketFilter 4 } -- 1.3.6.1.4.1.6296.102.7.2.8.4.1 sleV2CpuPacketFilterAdded NOTIFICATION-TYPE OBJECTS { sleV2CpuPacketFilterControlRequest, sleV2CpuPacketFilterControlName, sleV2CpuPacketFilterControlStage, sleV2CpuPacketFilterControlPriority, sleV2CpuPacketFilterControlAction, sleV2CpuPacketFilterControlActionRateLimit, sleV2CpuPacketFilterControlActionBurstSize, sleV2CpuPacketFilterControlActionTpid, sleV2CpuPacketFilterControlActionPcp, sleV2CpuPacketFilterControlActionVid, sleV2CpuPacketFilterControlActionTagPosition, sleV2CpuPacketFilterControlMatchType, sleV2CpuPacketFilterControlMatchCos, sleV2CpuPacketFilterControlMatchPort, sleV2CpuPacketFilterControlMatchVid, sleV2CpuPacketFilterControlMatchTagPosition, sleV2CpuPacketFilterControlMatchOffset, sleV2CpuPacketFilterControlMatchLength, sleV2CpuPacketFilterControlMatchData, sleV2CpuPacketFilterControlMatchMask, sleV2CpuPacketFilterControlStatus, sleV2CpuPacketFilterControlTimer, sleV2CpuPacketFilterControlMatchVidmap, sleV2CpuPacketFilterControlMatchTpid, sleV2CpuPacketFilterControlMatchPcp, sleV2CpuPacketFilterControlMatchDesc, sleV2CpuPacketFilterControlTimeStamp, sleV2CpuPacketFilterControlReqResult } STATUS current DESCRIPTION "Description." ::= { sleV2CpuPacketFilterNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.8.4.2 sleV2CpuPacketFilterDeleted NOTIFICATION-TYPE OBJECTS { sleV2CpuPacketFilterControlRequest, sleV2CpuPacketFilterControlTimeStamp, sleV2CpuPacketFilterControlReqResult, sleV2CpuPacketFilterControlIndex } STATUS current DESCRIPTION "Description." ::= { sleV2CpuPacketFilterNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.8.4.3 sleV2CpuPacketFilterActionChanged NOTIFICATION-TYPE OBJECTS { sleV2CpuPacketFilterControlRequest, sleV2CpuPacketFilterControlTimeStamp, sleV2CpuPacketFilterControlReqResult, sleV2CpuPacketFilterControlIndex, sleV2CpuPacketFilterControlAction, sleV2CpuPacketFilterControlActionRateLimit, sleV2CpuPacketFilterControlActionBurstSize, sleV2CpuPacketFilterControlActionTpid, sleV2CpuPacketFilterControlActionPcp, sleV2CpuPacketFilterControlActionVid, sleV2CpuPacketFilterControlActionTagPosition, sleV2CpuPacketFilterControlMatchType } STATUS current DESCRIPTION "Description." ::= { sleV2CpuPacketFilterNotification 3 } -- 1.3.6.1.4.1.6296.102.7.2.8.4.4 sleV2CpuPacketFilterMatchChanged NOTIFICATION-TYPE OBJECTS { sleV2CpuPacketFilterControlRequest, sleV2CpuPacketFilterControlTimeStamp, sleV2CpuPacketFilterControlReqResult, sleV2CpuPacketFilterControlIndex, sleV2CpuPacketFilterControlMatchType, sleV2CpuPacketFilterControlMatchCos, sleV2CpuPacketFilterControlMatchPort, sleV2CpuPacketFilterControlMatchVidmap, sleV2CpuPacketFilterControlMatchTagPosition, sleV2CpuPacketFilterControlMatchTpid, sleV2CpuPacketFilterControlMatchPcp, sleV2CpuPacketFilterControlMatchVid, sleV2CpuPacketFilterControlMatchOffset, sleV2CpuPacketFilterControlMatchLength, sleV2CpuPacketFilterControlMatchData, sleV2CpuPacketFilterControlMatchMask, sleV2CpuPacketFilterControlMatchDesc } STATUS current DESCRIPTION "Description." ::= { sleV2CpuPacketFilterNotification 4 } -- 1.3.6.1.4.1.6296.102.7.2.9 sleV2VlanOperation OBJECT IDENTIFIER ::= { sleVSecurity4 9 } -- 1.3.6.1.4.1.6296.102.7.2.9.1 sleV2VlanOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2VlanOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleV2VlanOperation 1 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1 sleV2VlanOperationEntry OBJECT-TYPE SYNTAX SleV2VlanOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleV2VlanOperationIndex, sleV2VlanOperationName } ::= { sleV2VlanOperationTable 1 } SleV2VlanOperationEntry ::= SEQUENCE { sleV2VlanOperationIndex Integer32, sleV2VlanOperationName OCTET STRING, sleV2VlanOperationStage INTEGER, sleV2VlanOperationProiroty Integer32, sleV2VlanOperationPort OCTET STRING, sleV2VlanOperationOuterVlan OCTET STRING, sleV2VlanOperationInnerVlan OCTET STRING, sleV2VlanOperationEtherType Integer32, sleV2VlanOperationIpProtocol Integer32, sleV2VlanOperationArpSip OCTET STRING, sleV2VlanOperationArpSipPfxLen Integer32, sleV2VlanOperationSip OCTET STRING, sleV2VlanOperationSipPfxLen Integer32, sleV2VlanOperationDip OCTET STRING, sleV2VlanOperationDipPfxLen Integer32, sleV2VlanOperationAction INTEGER, sleV2VlanOperationActionVid Integer32 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.1 sleV2VlanOperationIndex OBJECT-TYPE SYNTAX Integer32 (1..65565) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation index." ::= { sleV2VlanOperationEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.2 sleV2VlanOperationName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation name" ::= { sleV2VlanOperationEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.3 sleV2VlanOperationStage OBJECT-TYPE SYNTAX INTEGER { ingressSlowPath(1), egressSlowPath(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation stage." ::= { sleV2VlanOperationEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.4 sleV2VlanOperationProiroty OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation priority." ::= { sleV2VlanOperationEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.5 sleV2VlanOperationPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation ports" ::= { sleV2VlanOperationEntry 5 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.6 sleV2VlanOperationOuterVlan OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Outer vlan." ::= { sleV2VlanOperationEntry 6 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.7 sleV2VlanOperationInnerVlan OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The inner Vlan." ::= { sleV2VlanOperationEntry 7 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.8 sleV2VlanOperationEtherType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation ether-type." ::= { sleV2VlanOperationEntry 8 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.9 sleV2VlanOperationIpProtocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation IP Protocol" ::= { sleV2VlanOperationEntry 9 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.10 sleV2VlanOperationArpSip OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation source-IPaddress." ::= { sleV2VlanOperationEntry 10 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.11 sleV2VlanOperationArpSipPfxLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation source-IPAddress prefix-length." ::= { sleV2VlanOperationEntry 11 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.12 sleV2VlanOperationSip OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation Source-IPaddress." ::= { sleV2VlanOperationEntry 12 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.13 sleV2VlanOperationSipPfxLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation Source-IPAddress prefix-length." ::= { sleV2VlanOperationEntry 13 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.14 sleV2VlanOperationDip OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation Destination-IPaddress." ::= { sleV2VlanOperationEntry 14 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.15 sleV2VlanOperationDipPfxLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation Destination-IPAddress prefix-length." ::= { sleV2VlanOperationEntry 15 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.16 sleV2VlanOperationAction OBJECT-TYPE SYNTAX INTEGER { addServiceVlanTag(1), replaceServiceVlanID(2), removeServiceVlanTag(3), addCustomerVlanTag(4), replaceCustomerVlanID(5), removeCustomerVlanTag(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan-operation action types." ::= { sleV2VlanOperationEntry 16 } -- 1.3.6.1.4.1.6296.102.7.2.9.1.1.17 sleV2VlanOperationActionVid OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan operation action-vid." ::= { sleV2VlanOperationEntry 17 } -- 1.3.6.1.4.1.6296.102.7.2.9.2 sleV2VlanOperationControl OBJECT IDENTIFIER ::= { sleV2VlanOperation 2 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.1 sleV2VlanOperationControlRequest OBJECT-TYPE SYNTAX INTEGER { addVlanOperation(1), delVlanOperation(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2VlanOperationControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.2 sleV2VlanOperationControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2VlanOperationControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.3 sleV2VlanOperationControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2VlanOperationControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.4 sleV2VlanOperationControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2VlanOperationControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.5 sleV2VlanOperationControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2VlanOperationControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.6 sleV2VlanOperationControlIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation index." ::= { sleV2VlanOperationControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.7 sleV2VlanOperationControlName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation name" ::= { sleV2VlanOperationControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.8 sleV2VlanOperationControlStage OBJECT-TYPE SYNTAX INTEGER { ingressSlowPath(1), egressSlowPath(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation stage." ::= { sleV2VlanOperationControl 8 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.9 sleV2VlanOperationControlProiroty OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation priority." ::= { sleV2VlanOperationControl 9 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.10 sleV2VlanOperationControlPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation ports" ::= { sleV2VlanOperationControl 10 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.11 sleV2VlanOperationControlOuterVlan OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Outer vlan." ::= { sleV2VlanOperationControl 11 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.12 sleV2VlanOperationControlInnerVlan OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Inner vlan." ::= { sleV2VlanOperationControl 12 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.13 sleV2VlanOperationControlEtherType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation ether-type." ::= { sleV2VlanOperationControl 13 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.14 sleV2VlanOperationControlIpProtocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation IP Protocol" ::= { sleV2VlanOperationControl 14 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.15 sleV2VlanOperationControlArpSip OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation source-IPaddress." ::= { sleV2VlanOperationControl 15 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.16 sleV2VlanOperationControlArpSipPfxLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation source-IPAddress prefix-length." ::= { sleV2VlanOperationControl 16 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.17 sleV2VlanOperationControlSip OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation Source-IPaddress." ::= { sleV2VlanOperationControl 17 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.18 sleV2VlanOperationControlSipPfxLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation Source-IPAddress prefix-length." ::= { sleV2VlanOperationControl 18 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.19 sleV2VlanOperationControlDip OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation Destination-IPaddress." ::= { sleV2VlanOperationControl 19 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.20 sleV2VlanOperationControlDipPfxLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation Destination-IPAddress prefix-length." ::= { sleV2VlanOperationControl 20 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.21 sleV2VlanOperationControlAction OBJECT-TYPE SYNTAX INTEGER { addServiceVlanTag(1), replaceServiceVlanID(2), removeServiceVlanTag(3), addCustomerVlanTag(4), replaceCustomerVlanID(5), removeCustomerVlanTag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan-operation action types." ::= { sleV2VlanOperationControl 21 } -- 1.3.6.1.4.1.6296.102.7.2.9.2.22 sleV2VlanOperationControlActionVid OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan operation action-vid." ::= { sleV2VlanOperationControl 22 } -- 1.3.6.1.4.1.6296.102.7.2.9.3 sleV2VlanOperationNotification OBJECT IDENTIFIER ::= { sleV2VlanOperation 3 } -- 1.3.6.1.4.1.6296.102.7.2.9.3.1 sleV2VlanOperationCreated NOTIFICATION-TYPE OBJECTS { sleV2VlanOperationControlRequest, sleV2VlanOperationControlTimeStamp, sleV2VlanOperationControlReqResult, sleV2VlanOperationControlName, sleV2VlanOperationControlStage, sleV2VlanOperationControlProiroty, sleV2VlanOperationControlPort, sleV2VlanOperationControlOuterVlan, sleV2VlanOperationControlInnerVlan, sleV2VlanOperationControlEtherType, sleV2VlanOperationControlIpProtocol, sleV2VlanOperationControlArpSip, sleV2VlanOperationControlArpSipPfxLen, sleV2VlanOperationControlSip, sleV2VlanOperationControlSipPfxLen, sleV2VlanOperationControlDip, sleV2VlanOperationControlDipPfxLen, sleV2VlanOperationControlAction, sleV2VlanOperationControlActionVid } STATUS current DESCRIPTION "addVlanOperation" ::= { sleV2VlanOperationNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.9.3.2 sleV2VlanOperationDeleted NOTIFICATION-TYPE OBJECTS { sleV2VlanOperationControlRequest, sleV2VlanOperationControlTimeStamp, sleV2VlanOperationControlReqResult, sleV2VlanOperationControlName } STATUS current DESCRIPTION "delVlanOperation" ::= { sleV2VlanOperationNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.10 sleV2EthernetService OBJECT IDENTIFIER ::= { sleVSecurity4 10 } -- 1.3.6.1.4.1.6296.102.7.2.10.1 sleV2EthernetServiceBase OBJECT IDENTIFIER ::= { sleV2EthernetService 1 } -- 1.3.6.1.4.1.6296.102.7.2.10.1.1 sleV2EthernetServiceEnableStatus OBJECT-TYPE SYNTAX INTEGER { none(0), rt(1), cot(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The ethernet service mode status." ::= { sleV2EthernetServiceBase 1 } -- 1.3.6.1.4.1.6296.102.7.2.10.1.2 sleV2EthernetServiceEnableManagement OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The global management access status ( only in RT mode )" ::= { sleV2EthernetServiceBase 2 } -- 1.3.6.1.4.1.6296.102.7.2.10.1.3 sleV2EthernetServiceHealthCheckPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The health check port of uplink. ( only in COT mode )" ::= { sleV2EthernetServiceBase 3 } -- 1.3.6.1.4.1.6296.102.7.2.10.1.4 sleV2EthernetServiceHealthCheckVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The health check vid of uplink. ( only in COT mode )" ::= { sleV2EthernetServiceBase 4 } -- 1.3.6.1.4.1.6296.102.7.2.10.2 sleV2EthernetServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF SleV2EthernetServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sleV2EthernetService 2 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1 sleV2EthernetServiceEntry OBJECT-TYPE SYNTAX SleV2EthernetServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { sleV2EthernetServiceSid } ::= { sleV2EthernetServiceTable 1 } SleV2EthernetServiceEntry ::= SEQUENCE { sleV2EthernetServiceSid INTEGER, sleV2EthernetServiceType INTEGER, sleV2EthernetServiceRtCustomerPort OCTET STRING, sleV2EthernetServiceRtCustomerVid OCTET STRING, sleV2EthernetServiceRtNetworkPort OCTET STRING, sleV2EthernetServiceRtNetworkVid OCTET STRING, sleV2EthernetServiceRtEnableManagement INTEGER, sleV2EthernetServiceCotExternalPort OCTET STRING, sleV2EthernetServiceCotExternalVid OCTET STRING, sleV2EthernetServiceCotInternalPort OCTET STRING, sleV2EthernetServiceCotInternalVid OCTET STRING } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.1 sleV2EthernetServiceSid OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique number is given by service identifier." ::= { sleV2EthernetServiceEntry 1 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.2 sleV2EthernetServiceType OBJECT-TYPE SYNTAX INTEGER { unicast(1), multicast(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The ethernet service type 1: unicast 2: multicast" ::= { sleV2EthernetServiceEntry 2 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.3 sleV2EthernetServiceRtCustomerPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Configuring service's customer port for RT mode." ::= { sleV2EthernetServiceEntry 3 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.4 sleV2EthernetServiceRtCustomerVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Configuring service's customer vid for RT mode." ::= { sleV2EthernetServiceEntry 4 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.5 sleV2EthernetServiceRtNetworkPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Configuring service's network port for RT mode." ::= { sleV2EthernetServiceEntry 5 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.6 sleV2EthernetServiceRtNetworkVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Configuring service's network vid for RT mode." ::= { sleV2EthernetServiceEntry 6 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.7 sleV2EthernetServiceRtEnableManagement OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { sleV2EthernetServiceEntry 7 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.8 sleV2EthernetServiceCotExternalPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Configuring service's external port for COT mode." ::= { sleV2EthernetServiceEntry 8 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.9 sleV2EthernetServiceCotExternalVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Configuring service's external vid for COT mode." ::= { sleV2EthernetServiceEntry 9 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.10 sleV2EthernetServiceCotInternalPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Configuring service's internal port for COT mode." ::= { sleV2EthernetServiceEntry 10 } -- 1.3.6.1.4.1.6296.102.7.2.10.2.1.11 sleV2EthernetServiceCotInternalVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Configuring service's internal vid for COT mode." ::= { sleV2EthernetServiceEntry 11 } -- 1.3.6.1.4.1.6296.102.7.2.10.3 sleV2EthernetServiceControl OBJECT IDENTIFIER ::= { sleV2EthernetService 3 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.1 sleV2EthernetServiceControlRequest OBJECT-TYPE SYNTAX INTEGER { setEnableStatus(1), setEnableManagement(2), setHealthCheck(3), delHealthCheck(4), setSidForRT(5), setSidForCOT(6), delService(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The request of a user command" ::= { sleV2EthernetServiceControl 1 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.2 sleV2EthernetServiceControlStatus OBJECT-TYPE SYNTAX SleControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of user command" ::= { sleV2EthernetServiceControl 2 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.3 sleV2EthernetServiceControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time for the manager for a long running user command" ::= { sleV2EthernetServiceControl 3 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.4 sleV2EthernetServiceControlTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command(end of command)" ::= { sleV2EthernetServiceControl 4 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.5 sleV2EthernetServiceControlReqResult OBJECT-TYPE SYNTAX SleControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sleV2EthernetServiceControl 5 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.6 sleV2EthernetServiceControlEnableStatus OBJECT-TYPE SYNTAX INTEGER { none(0), rt(1), cot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ethernet service mode status." ::= { sleV2EthernetServiceControl 6 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.7 sleV2EthernetServiceControlEnableManagement OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The local management access status ( only in RT mode )" ::= { sleV2EthernetServiceControl 7 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.8 sleV2EthernetServiceControlHealthCheckPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The health check port of uplink. ( only in COT mode )" ::= { sleV2EthernetServiceControl 8 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.9 sleV2EthernetServiceControlHealthCheckVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The health check vid of uplink. ( only in COT mode )" ::= { sleV2EthernetServiceControl 9 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.10 sleV2EthernetServiceControlSid OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The unique number is given by service identifier." ::= { sleV2EthernetServiceControl 10 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.11 sleV2EthernetServiceControlType OBJECT-TYPE SYNTAX INTEGER { unicast(1), multicast(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ethernet service type 1: unicast 2: multicast" ::= { sleV2EthernetServiceControl 11 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.12 sleV2EthernetServiceControlRtCustomerPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Configuring service's customer port for RT mode." ::= { sleV2EthernetServiceControl 12 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.13 sleV2EthernetServiceControlRtCustomerVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Configuring service's customer vid for RT mode." ::= { sleV2EthernetServiceControl 13 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.14 sleV2EthernetServiceControlRtNetworkPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Configuring service's network port for RT mode." ::= { sleV2EthernetServiceControl 14 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.15 sleV2EthernetServiceControlRtNetworkVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Configuring service's network vid for RT mode." ::= { sleV2EthernetServiceControl 15 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.16 sleV2EthernetServiceControlRtEnableManagement OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sleV2EthernetServiceControl 16 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.17 sleV2EthernetServiceControlCotExternalPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Configuring service's external port for COT mode." ::= { sleV2EthernetServiceControl 17 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.18 sleV2EthernetServiceControlCotExternalVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Configuring service's external vid for COT mode." ::= { sleV2EthernetServiceControl 18 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.19 sleV2EthernetServiceControlCotInternalPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Configuring service's internal port for COT mode." ::= { sleV2EthernetServiceControl 19 } -- 1.3.6.1.4.1.6296.102.7.2.10.3.20 sleV2EthernetServiceControlCotInternalVid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Configuring service's internal vid for COT mode." ::= { sleV2EthernetServiceControl 20 } -- 1.3.6.1.4.1.6296.102.7.2.10.4 sleV2EthernetServiceNotification OBJECT IDENTIFIER ::= { sleV2EthernetService 4 } -- 1.3.6.1.4.1.6296.102.7.2.10.4.1 sleV2EthernetServiceEnableStatusChanged NOTIFICATION-TYPE OBJECTS { sleV2EthernetServiceControlRequest, sleV2EthernetServiceControlTimeStamp, sleV2EthernetServiceControlReqResult, sleV2EthernetServiceControlEnableStatus } STATUS current DESCRIPTION "setEnableStatus" ::= { sleV2EthernetServiceNotification 1 } -- 1.3.6.1.4.1.6296.102.7.2.10.4.2 sleV2EthernetServiceEnableManagementChanged NOTIFICATION-TYPE OBJECTS { sleV2EthernetServiceControlRequest, sleV2EthernetServiceControlTimeStamp, sleV2EthernetServiceControlReqResult, sleV2EthernetServiceControlEnableManagement } STATUS current DESCRIPTION "setEnableManagement" ::= { sleV2EthernetServiceNotification 2 } -- 1.3.6.1.4.1.6296.102.7.2.10.4.3 sleV2EthernetServiceHealthCheckChanged NOTIFICATION-TYPE OBJECTS { sleV2EthernetServiceControlRequest, sleV2EthernetServiceControlTimeStamp, sleV2EthernetServiceControlReqResult, sleV2EthernetServiceControlHealthCheckPort, sleV2EthernetServiceControlHealthCheckVid } STATUS current DESCRIPTION "setHealthCheck" ::= { sleV2EthernetServiceNotification 3 } -- 1.3.6.1.4.1.6296.102.7.2.10.4.4 sleV2EthernetServiceHealthCheckDeleted NOTIFICATION-TYPE OBJECTS { sleV2EthernetServiceControlRequest, sleV2EthernetServiceControlTimeStamp, sleV2EthernetServiceControlReqResult } STATUS current DESCRIPTION "delHealthCheck" ::= { sleV2EthernetServiceNotification 4 } -- 1.3.6.1.4.1.6296.102.7.2.10.4.5 sleV2EthernetServiceSidForRtModeCreated NOTIFICATION-TYPE OBJECTS { sleV2EthernetServiceControlRequest, sleV2EthernetServiceControlTimeStamp, sleV2EthernetServiceControlReqResult, sleV2EthernetServiceControlSid, sleV2EthernetServiceControlType, sleV2EthernetServiceControlRtCustomerPort, sleV2EthernetServiceControlRtCustomerVid, sleV2EthernetServiceControlRtNetworkPort, sleV2EthernetServiceControlRtNetworkVid, sleV2EthernetServiceControlRtEnableManagement } STATUS current DESCRIPTION "setSidForRT" ::= { sleV2EthernetServiceNotification 5 } -- 1.3.6.1.4.1.6296.102.7.2.10.4.6 sleV2EthernetServiceSidForCotModeCreated NOTIFICATION-TYPE OBJECTS { sleV2EthernetServiceControlRequest, sleV2EthernetServiceControlTimeStamp, sleV2EthernetServiceControlReqResult, sleV2EthernetServiceControlSid, sleV2EthernetServiceControlType, sleV2EthernetServiceControlCotExternalPort, sleV2EthernetServiceControlCotExternalVid, sleV2EthernetServiceControlCotInternalPort, sleV2EthernetServiceControlCotInternalVid } STATUS current DESCRIPTION "setSidForCOT" ::= { sleV2EthernetServiceNotification 6 } -- 1.3.6.1.4.1.6296.102.7.2.10.4.7 sleV2EthernetServiceSidDeleted NOTIFICATION-TYPE OBJECTS { sleV2EthernetServiceControlRequest, sleV2EthernetServiceControlTimeStamp, sleV2EthernetServiceControlReqResult, sleV2EthernetServiceControlSid } STATUS current DESCRIPTION "delService" ::= { sleV2EthernetServiceNotification 7 } -- 1.3.6.1.4.1.6296.102.7.3 sleV2Security6 OBJECT IDENTIFIER ::= { sleV2Security 3 } -- 1.3.6.1.4.1.6296.102.7.4 sleV2SecurityGroup OBJECT-GROUP OBJECTS { sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowName, sleV2Security4ACLFlowSrcIpAddr, sleV2Security4ACLFlowSrcIpAddrMask, sleV2Security4ACLFlowDstIpAddr, sleV2Security4ACLFlowDstIpAddrMask, sleV2Security4ACLFlowProtocolType, sleV2Security4ACLFlowTcpSrcStartPort, sleV2Security4ACLFlowTcpSrcEndPort, sleV2Security4ACLFlowTcpDstStartPort, sleV2Security4ACLFlowTcpDstEndPort, sleV2Security4ACLFlowTcpFlag, sleV2Security4ACLFlowUdpSrcStartPort, sleV2Security4ACLFlowUdpSrcEndPort, sleV2Security4ACLFlowUdpDstStartPort, sleV2Security4ACLFlowUdpDstEndPort, sleV2Security4ACLFlowIcmpType, sleV2Security4ACLFlowIcmpCode, sleV2Security4ACLFlowControlTcpFlag, sleV2Security4ACLFlowClassIndex, sleV2Security4ACLFlowClassID, sleV2Security4ACLFlowClassName, sleV2Security4ACLFlowPolicyIndex, sleV2Security4ACLFlowPolicyID, sleV2Security4ACLFlowPolicyName, sleV2Security4ACLClassIndex, sleV2Security4ACLClassName, sleV2Security4ACLClassFlowCnt, sleV2Security4ACLClassFlowIndex, sleV2Security4ACLClassFlowID, sleV2Security4ACLClassFlowName, sleV2Security4ACLClassPolicyIndex, sleV2Security4ACLClassPolicyID, sleV2Security4ACLClassPolicyName, sleV2Security4ACLPolicyIndex, sleV2Security4ACLPolicyName, sleV2Security4ACLPolicyFlowCnt, sleV2Security4ACLPolicyClassCnt, sleV2Security4ACLPolicyPriority, sleV2Security4ACLPolicyMatchFlag, sleV2Security4ACLPolicyNomatchFlag, sleV2Security4ACLPolicyFlowClassIndex, sleV2Security4ACLPolicyFlowClassType, sleV2Security4ACLPolicyFlowClassID, sleV2Security4ACLFlowControlRequest, sleV2Security4ACLFlowControlStatus, sleV2Security4ACLFlowControlTimer, sleV2Security4ACLFlowControlTimeStamp, sleV2Security4ACLFlowControlReqResult, sleV2Security4ACLFlowControlIndex, sleV2Security4ACLFlowControlName, sleV2Security4ACLFlowControlSrcIpAddr, sleV2Security4ACLFlowControlSrcIpAddrMask, sleV2Security4ACLFlowControlDstIpAddr, sleV2Security4ACLFlowControlDstIpAddrMask, sleV2Security4ACLFlowControlProtocolType, sleV2Security4ACLFlowControlTcpSrcStartPort, sleV2Security4ACLFlowControlTcpSrcEndPort, sleV2Security4ACLFlowControlTcpDstStartPort, sleV2Security4ACLFlowControlTcpDstEndPort, sleV2Security4ACLFlowControlUdpSrcStartPort, sleV2Security4ACLFlowControlUdpSrcEndPort, sleV2Security4ACLFlowControlUdpDstStartPort, sleV2Security4ACLFlowControlUdpDstEndPort, sleV2Security4ACLFlowControlIcmpType, sleV2Security4ACLFlowControlIcmpCode, sleV2Security4ACLFlowControlHdrlen, sleV2Security4ACLClassControlRequest, sleV2Security4ACLClassControlStatus, sleV2Security4ACLClassControlTimer, sleV2Security4ACLClassControlTimeStamp, sleV2Security4ACLClassControlReqResult, sleV2Security4ACLClassControlIndex, sleV2Security4ACLClassControlName, sleV2Security4ACLClassFlowControlRequest, sleV2Security4ACLClassFlowControlStatus, sleV2Security4ACLClassFlowControlTimer, sleV2Security4ACLClassFlowControlTimeStamp, sleV2Security4ACLClassFlowControlReqResult, sleV2Security4ACLClassFlowControlClassIndex, sleV2Security4ACLClassFlowControlFlowIndex, sleV2Security4ACLClassFlowControlFlowID, sleV2Security4ACLPolicyControlRequest, sleV2Security4ACLPolicyControlStatus, sleV2Security4ACLPolicyControlTimer, sleV2Security4ACLPolicyControlTimeStamp, sleV2Security4ACLPolicyControlReqResult, sleV2Security4ACLPolicyControlIndex, sleV2Security4ACLPolicyControlName, sleV2Security4ACLPolicyControlPriority, sleV2Security4ACLPolicyControlMatchFlag, sleV2Security4ACLPolicyControlNomatchFlag, sleV2Security4ACLPolicyFlowClassControlRequest, sleV2Security4ACLPolicyFlowClassControlStatus, sleV2Security4ACLPolicyFlowClassControlTimer, sleV2Security4ACLPolicyFlowClassControlTimeStamp, sleV2Security4ACLPolicyFlowClassControlReqResult, sleV2Security4ACLPolicyFlowClassControlPolicyIndex, sleV2Security4ACLPolicyFlowClassControlIndex, sleV2Security4ACLPolicyFlowClassControlType, sleV2Security4ACLPolicyFlowClassControlFlowID, sleV2Security4ACLPolicyFlowClassControlClassID, sleV2SecuritySACLName, sleV2SecuritySACLSrcIpaddr, sleV2SecuritySACLSrcPrefixLength, sleV2SecuritySACLDstIpAddr, sleV2SecuritySACLDstPrefixLength, sleV2SecuritySACLProtocolType, sleV2SecuritySACLTcpflag, sleV2SecuritySACLIcmpType, sleV2SecuritySACLIcmpCode, sleV2SecuritySACLPriority, sleV2SecuritySACLMatchAction, sleV2SecuritySACLNomatchAction, sleV2SecuritySACLControlRequest, sleV2SecuritySACLControlStatus, sleV2SecuritySACLControlTimer, sleV2SecuritySACLControlTimeStamp, sleV2SecuritySACLControlReqResult, sleV2SecuritySACLControlName, sleV2SecuritySACLControlSrcIpaddr, sleV2SecuritySACLControlSrcPrefixLength, sleV2SecuritySACLControlDstIpaddr, sleV2SecuritySACLControlDstPrefixLength, sleV2SecuritySACLControlProtocolType, sleV2SecuritySACLControlTcpflag, sleV2SecuritySACLControlIcmpType, sleV2SecuritySACLControlIcmpCode, sleV2SecuritySACLControlPriority, sleV2SecuritySACLControlMatchAction, sleV2SecuritySACLControlNomatchAction, sleV2Security4ACLPolicyFlowClassName, sleV2Security4ACLFlowHdrlen, sleV2SecuritySACLDstL4Port, sleV2SecuritySACLSrcL4Port, sleV2SecuritySACLControlSrcL4Port, sleV2SecuritySACLControlDstL4Port, sleV2SecurityACLTotalPacket, sleV2SecurityACLSrcHistoryIpAddr, sleV2SecurityACLStatisticsControlRequest, sleV2SecurityACLStatisticsControlStatus, sleV2SecurityACLStatisticsControlTimer, sleV2SecurityACLStatisticsControlTimeStamp, sleV2SecurityACLStatisticsControlReqResult, sleV2SecurityACLStatisticsBaseControlTimer, sleV2SecurityACLStatisticsBaseControlStatus, sleV2SecurityACLStatisticsBaseControlRequest, sleV2SecurityACLStatisticsControlName, sleV2SecurityACLSrcHistoryIndex, sleV2SecurityACLStatisticsBaseControlTimeStamp, sleV2SecurityACLStatisticsBaseControlReqResult, sleV2CpuPacketFilterIndex, sleV2CpuPacketFilterName, sleV2CpuPacketFilterCreationTime, sleV2CpuPacketFilterElapsedtimeAfterClear, sleV2CpuPacketFilterStage, sleV2CpuPacketFilterPriority, sleV2CpuPacketFilterAction, sleV2CpuPacketFilterActionRateLimit, sleV2CpuPacketFilterActionBurstSize, sleV2CpuPacketFilterActionTpid, sleV2CpuPacketFilterActionPcp, sleV2CpuPacketFilterActionVid, sleV2CpuPacketFilterActionTagPosition, sleV2CpuPacketFilterMatchType, sleV2CpuPacketFilterMatchCos, sleV2CpuPacketFilterMatchPort, sleV2CpuPacketFilterMatchVid, sleV2CpuPacketFilterMatchTagPosition, sleV2CpuPacketFilterMatchOffset, sleV2CpuPacketFilterMatchLength, sleV2CpuPacketFilterMatchData, sleV2CpuPacketFilterMatchMask, sleV2CpuPacketFilterMatchDesc, sleV2CpuPacketFilterControlRequest, sleV2CpuPacketFilterControlStatus, sleV2CpuPacketFilterControlTimer, sleV2CpuPacketFilterControlTimeStamp, sleV2CpuPacketFilterControlReqResult, sleV2CpuPacketFilterControlIndex, sleV2CpuPacketFilterControlName, sleV2CpuPacketFilterControlStage, sleV2CpuPacketFilterControlPriority, sleV2CpuPacketFilterControlAction, sleV2CpuPacketFilterControlActionRateLimit, sleV2CpuPacketFilterControlActionBurstSize, sleV2CpuPacketFilterControlActionTpid, sleV2CpuPacketFilterControlActionPcp, sleV2CpuPacketFilterControlActionVid, sleV2CpuPacketFilterControlActionTagPosition, sleV2CpuPacketFilterControlMatchType, sleV2CpuPacketFilterControlMatchCos, sleV2CpuPacketFilterControlMatchPort, sleV2CpuPacketFilterControlMatchVid, sleV2CpuPacketFilterControlMatchTagPosition, sleV2CpuPacketFilterControlMatchOffset, sleV2CpuPacketFilterControlMatchLength, sleV2CpuPacketFilterControlMatchData, sleV2CpuPacketFilterControlMatchMask, sleV2CpuPacketFilterControlMatchDesc, sleV2CpuPacketFilterMatchIndex, sleV2CpuPacketFilterMatchVidmap, sleV2CpuPacketFilterMatchTpid, sleV2CpuPacketFilterMatchPcp, sleV2CpuPacketFilterControlMatchVidmap, sleV2CpuPacketFilterControlMatchTpid, sleV2CpuPacketFilterControlMatchPcp, sleV2Security4ACLFlowIpFlag, sleV2Security4ACLFlowControlIpFlag, sleV2VlanOperationIndex, sleV2VlanOperationName, sleV2VlanOperationStage, sleV2VlanOperationPort, sleV2VlanOperationEtherType, sleV2VlanOperationIpProtocol, sleV2VlanOperationArpSip, sleV2VlanOperationArpSipPfxLen, sleV2VlanOperationDip, sleV2VlanOperationDipPfxLen, sleV2VlanOperationAction, sleV2VlanOperationActionVid, sleV2VlanOperationProiroty, sleV2VlanOperationControlIndex, sleV2VlanOperationControlName, sleV2VlanOperationControlStage, sleV2VlanOperationControlProiroty, sleV2VlanOperationControlPort, sleV2VlanOperationControlEtherType, sleV2VlanOperationControlIpProtocol, sleV2VlanOperationControlArpSip, sleV2VlanOperationControlArpSipPfxLen, sleV2VlanOperationControlDip, sleV2VlanOperationControlDipPfxLen, sleV2VlanOperationControlAction, sleV2VlanOperationControlActionVid, sleV2VlanOperationSip, sleV2VlanOperationSipPfxLen, sleV2VlanOperationControlSip, sleV2VlanOperationControlSipPfxLen, sleV2VlanOperationOuterVlan, sleV2VlanOperationInnerVlan, sleV2VlanOperationControlOuterVlan, sleV2VlanOperationControlInnerVlan, sleV2EthernetServiceEnableStatus, sleV2EthernetServiceEnableManagement, sleV2EthernetServiceHealthCheckPort, sleV2EthernetServiceHealthCheckVid, sleV2EthernetServiceSid, sleV2EthernetServiceType, sleV2EthernetServiceRtCustomerPort, sleV2EthernetServiceRtCustomerVid, sleV2EthernetServiceRtNetworkPort, sleV2EthernetServiceRtNetworkVid, sleV2EthernetServiceRtEnableManagement, sleV2EthernetServiceCotExternalPort, sleV2EthernetServiceCotExternalVid, sleV2EthernetServiceCotInternalPort, sleV2EthernetServiceCotInternalVid, sleV2EthernetServiceControlRequest, sleV2EthernetServiceControlStatus, sleV2EthernetServiceControlTimer, sleV2EthernetServiceControlTimeStamp, sleV2EthernetServiceControlReqResult, sleV2EthernetServiceControlEnableStatus, sleV2EthernetServiceControlEnableManagement, sleV2EthernetServiceControlHealthCheckPort, sleV2EthernetServiceControlHealthCheckVid, sleV2EthernetServiceControlSid, sleV2EthernetServiceControlType, sleV2EthernetServiceControlRtCustomerPort, sleV2EthernetServiceControlRtCustomerVid, sleV2EthernetServiceControlRtNetworkPort, sleV2EthernetServiceControlRtNetworkVid, sleV2EthernetServiceControlRtEnableManagement, sleV2EthernetServiceControlCotExternalPort, sleV2EthernetServiceControlCotExternalVid, sleV2EthernetServiceControlCotInternalPort, sleV2EthernetServiceControlCotInternalVid, sleV2Security4ACLClassFlowClassName, sleV2Security4ACLClassFlowControlClassName, sleV2Security4ACLPolicyControlFlowID, sleV2Security4ACLPolicyControlClassID, sleV2SecurityACLFlowInetAddrType, sleV2SecurityACLFlowSrcInetAddr, sleV2SecurityACLFlowDstInetAddr, sleV2SecurityACLFlowSrcInetAddrLen, sleV2SecurityACLFlowDstInetAddrLen, sleV2SecurityACLFlowControlInetAddrType, sleV2SecurityACLFlowControlSrcInetAddr, sleV2SecurityACLFlowControlDstInetAddr, sleV2SecurityACLFlowControlSrcInetAddrLen, sleV2SecurityACLFlowControlDstInetAddrLen, sleV2Security4ACLGroupIfindex, sleV2Security4ACLGroupIfType, sleV2Security4ACLGroupIfName, sleV2Security4ACLGroupIfPriority, sleV2Security4ACLGroupIfControlRequest, sleV2Security4ACLGroupIfControlStatus, sleV2Security4ACLGroupIfControlTimer, sleV2Security4ACLGroupIfControlReqResult, sleV2Security4ACLGroupIfControlTimeStamp, sleV2Security4ACLGroupIfConrolIndex, sleV2Security4ACLGroupIfControlType, sleV2Security4ACLGroupIfControlName, sleV2Security4ACLGroupIfControlPriority, sleV2SecurityACLStatisticsBaseControlSyslogMode, sleV2SecurityACLStatisticsSyslogStatus, sleV2VlanOperationControlRequest, sleV2VlanOperationControlStatus, sleV2VlanOperationControlTimer, sleV2VlanOperationControlTimeStamp, sleV2VlanOperationControlReqResult } STATUS current DESCRIPTION "Description." ::= { sleV2Security 4 } -- 1.3.6.1.4.1.6296.102.7.5 sleV2SecurityNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sleACLFlowCreated, sleACLFlowChanged, sleACLFlowDestroyed, sleACLFlowAllDestroyed, sleACLClassCreated, sleACLClassDestroyed, sleACLClassAllDestroyed, sleACLClassFlowAdded, sleACLClassFlowDeleted, sleACLClassFlowAllDeleted, sleACLPolicyCreated, sleACLPolicyInfoChanged, sleACLPolicyMatchActionChanged, sleACLPolicyNomatchActionChanged, sleACLPolicyDestroyed, sleACLPolicyFlowAdded, sleACLPolicyFlowDeleted, sleACLPolicyAllFlowDeleted, sleACLPolicyAllClassDeleted, sleACLPolicyAllFlowClassDeleted, sleSACLCreated, sleSACLDestroyed, sleSACLAllDestroyed, sleV2SecurityACLStatisticsSyslogModeChanged, sleV2SecurityACLStatisticsCleared, sleV2CpuPacketFilterAdded, sleV2CpuPacketFilterDeleted, sleV2CpuPacketFilterActionChanged, sleV2CpuPacketFilterMatchChanged, sleV2VlanOperationCreated, sleV2VlanOperationDeleted, sleV2EthernetServiceEnableStatusChanged, sleV2EthernetServiceEnableManagementChanged, sleV2EthernetServiceHealthCheckChanged, sleV2EthernetServiceHealthCheckDeleted, sleV2EthernetServiceSidForRtModeCreated, sleV2EthernetServiceSidForCotModeCreated, sleV2EthernetServiceSidDeleted, sleACLFlowExCreated, sleACLFlowExChanged, sleV2Security4ACLGroupIfProfileAdd, sleV2Security4ACLGroupIfProfileDelete } STATUS current DESCRIPTION "Description." ::= { sleV2Security 5 } END -- -- slev2-security-mib.mib --