-- *****************************************************************
-- DELL-NETWORKING-TRAP-ALRM-MIB
--
--
-- Copyright (c) 2003-2014 by Dell Inc. All Rights Reserved.
-- All rights reserved.
-- *****************************************************************
--

DELL-NETWORKING-TRAP-EVENT-MIB DEFINITIONS ::= BEGIN

IMPORTS

        MODULE-IDENTITY, OBJECT-TYPE,
        Integer32, TimeTicks
            FROM SNMPv2-SMI
        DateAndTime, DisplayString, RowPointer
            FROM SNMPv2-TC
        dellNetMgmt
            FROM DELL-NETWORKING-SMI
        ;
 
dellNetTrapEventMib   MODULE-IDENTITY
        LAST-UPDATED    "201202210000Z"
        ORGANIZATION    "Dell Inc"
        CONTACT-INFO
            "http://www.dell.com/support"

        DESCRIPTION
            "Dell Networking OS Trap Alarm MIB.
            Dell Networking OS Trap Event MIB allows users to track or to view 
            the trap events logged by the system.  There are two types
            of trap event tables, hostory trap event table and active
            trap event table.

            All the traps sent by the system are logged to history trap
            event table. The trap that need action will logged to active
            trap event table; 'Card down' trap event will go to the active
            trap event table, and the trap will be cleared as soon as
            'Card Up' event is issued. 
            "
        REVISION        "201202210000Z" -- Feb 21, 2012
        DESCRIPTION
            "Add historyTrapEventPort to dellNetHistoryTrapEventTable and
             activeTrapEventPort to dellNetActiveTrapEventTable.
            "
        REVISION        "200510050000Z"
        DESCRIPTION
            "The initial reversion.
            "
        ::= { dellNetMgmt 6 }   


dellNetTrapEventObjects  OBJECT IDENTIFIER ::= { dellNetTrapEventMib 1 }
dellNetHistoryTrapEvent  OBJECT IDENTIFIER ::= { dellNetTrapEventObjects 1 } 
dellNetActiveTrapEvent   OBJECT IDENTIFIER ::= { dellNetTrapEventObjects 2 } 
dellNetTrapVarbindEvent  OBJECT IDENTIFIER ::= { dellNetTrapEventObjects 3 } 

-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr


dellNetChassisBootupTime OBJECT-TYPE
    SYNTAX        DateAndTime
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The dellNetChassisBootupTime used the timestamp to uniquely
         identify the system between system reboots.
          
         Each time an NMS connects to a chassis, it should verify
         its dellNetChassisBootupTime. If the time is different, it should
         refresh its history and active tables. 

         But, if the dellNetChassisBootupTime is the same, then it should
         query the dellNetLastTrapEventSeqId and update its history and active
         tables  from its own dellNetLastTrapEventSeqId to the chassis
         dellNetLastTrapEventSeqId.
        "
    ::= { dellNetHistoryTrapEvent 1 }

dellNetLastTrapEventSeqId OBJECT-TYPE
    SYNTAX        Integer32 (1..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "
         dellNetLastTrapEventSeqId is a sequential ID indicated the number of 
         traps sent by the syatem since chassis is loaded.  The same id can
         also be used as the index to the history and active tables.
            
         Anytime, if an NMS dropped its connection with a chassis, it should
         sync up its history tables from its own dellNetLastTrapEventSeqId to
         the chassis dellNetLastTrapEventSeqId.
        "
    ::= { dellNetHistoryTrapEvent 2 }

dellNetMaxHistoryTableSize OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "
         dellNetMaxHistoryTableSize is the maximum rows in history table.
         This also limits the active/varbind tables.
         Whenever there is a chance of overflow, the oldest entry 
         will be deleted form the history table.
         Respective entry from active table also will be deleted 
         and the corresponding varbind entries will be deleted 
         from varbind table.
        "
    ::= { dellNetHistoryTrapEvent 3 }

dellNetHistoryTrapEventTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DellNetHistoryTrapEventEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of history trap event table."
    ::= { dellNetHistoryTrapEvent 4 }

dellNetHistoryTrapEventEntry OBJECT-TYPE
    SYNTAX DellNetHistoryTrapEventEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of history trap event table.
	"

    INDEX { historyTrapEventSeqId }
    ::= { dellNetHistoryTrapEventTable 1 }


DellNetHistoryTrapEventEntry ::= SEQUENCE {
    historyTrapEventSeqId 	Integer32,
    historyTrapEventSeverity 	Integer32,
    historyTrapEventType 	Integer32,
    historyTrapEventMsg 	DisplayString,
    historyTrapEventOid 	RowPointer,
    historyTrapEventSlot 	Integer32,
    historyTrapEventTimeStamp 	TimeTicks,
    historyTrapEventPort 	Integer32

    }

historyTrapEventSeqId OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "
         historyTrapEventSeqId is a sequential ID and the index to
         history trap table.
        "
    ::= { dellNetHistoryTrapEventEntry 1 }

historyTrapEventSeverity OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap severity level. 
        "
    ::= { dellNetHistoryTrapEventEntry 2 }

historyTrapEventType OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap category type.  
        "
    ::= { dellNetHistoryTrapEventEntry 3 }

historyTrapEventMsg OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The message or the description of the trap.
        "
    ::= { dellNetHistoryTrapEventEntry 4 }

historyTrapEventOid OBJECT-TYPE
    SYNTAX RowPointer
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The OID of this trap.
        "
    ::= { dellNetHistoryTrapEventEntry 5 }

historyTrapEventSlot OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         Corresponsding to chAlarmVarSlot in trap definition.
         For example if card is down, this field will have the
         card slot number.
         The value of -1 is used for non-applicable case.
        "
    ::= { dellNetHistoryTrapEventEntry 6 }

historyTrapEventTimeStamp OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The timestamp when the trap is sent.
        "
    ::= { dellNetHistoryTrapEventEntry 7 }

historyTrapEventPort OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         Corresponsding to chAlarmVarPort in trap definition.
         This field may be used for other instance depending on
         the trap type, for example, tray number in case of fan
         or power supply trap.
         The value of -1 is used for non-applicable case.
        "
    ::= { dellNetHistoryTrapEventEntry 8 }

-- End of dellNetHistoryTrapEventTable


-- Active Trap Event table.

dellNetActiveTrapEventTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DellNetActiveTrapEventEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of active trap event table."
    ::= { dellNetActiveTrapEvent 1 }

dellNetActiveTrapEventEntry OBJECT-TYPE
    SYNTAX DellNetActiveTrapEventEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of active trap event table.
	"

    INDEX { activeTrapEventSeqId }
    ::= { dellNetActiveTrapEventTable 1 }


DellNetActiveTrapEventEntry ::= SEQUENCE {
    activeTrapEventSeqId 	Integer32,
    activeTrapEventSeverity 	Integer32,
    activeTrapEventType 	Integer32,
    activeTrapEventMsg 		DisplayString,
    activeTrapEventOid 		RowPointer,
    activeTrapEventSlot     	Integer32,
    activeTrapEventTimeStamp 	TimeTicks,
    activeTrapEventPort 	Integer32

    }

activeTrapEventSeqId OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "
         activeTrapEventSeqId is a sequential ID and the index to
         active trap table.
        "
    ::= { dellNetActiveTrapEventEntry 1 }

activeTrapEventSeverity OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap severity level.
        "
    ::= { dellNetActiveTrapEventEntry 2 }

activeTrapEventType OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap category type.
        "
    ::= { dellNetActiveTrapEventEntry 3 }

activeTrapEventMsg OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The message or the description of the trap.
        "
    ::= { dellNetActiveTrapEventEntry 4 }

activeTrapEventOid OBJECT-TYPE
    SYNTAX RowPointer
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The OID of this trap.
        "
    ::= { dellNetActiveTrapEventEntry 5 }

activeTrapEventSlot OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         Corresponsding to chAlarmVarSlot in trap definition.
         For example if card is down, this field will have the
         card slot number.
         The value of -1 is used for non-applicable case.
        "
    ::= { dellNetActiveTrapEventEntry 6 }

activeTrapEventTimeStamp OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The timestamp when the trap is sent.
        "
    ::= { dellNetActiveTrapEventEntry 7 }

activeTrapEventPort OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         Corresponsding to chAlarmVarPort in trap definition.
         This field may be used for other instance depending on
         the trap type, for example, tray number in case of fan
         or power supply trap.
         The value of -1 is used for non-applicable case.
        "
    ::= { dellNetActiveTrapEventEntry 8 }

-- End of dellNetActiveTrapEventTable

-- Trap Event varbind table.

dellNetTrapEventVarbindTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DellNetTrapEventVarbindEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of trap event varbind table."
    ::= { dellNetTrapVarbindEvent 1 }

dellNetTrapEventVarbindEntry OBJECT-TYPE
    SYNTAX DellNetTrapEventVarbindEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of trap event varbind table.
	"
    INDEX { trapEventVarbindSeqId, trapEventVarbindId }
    ::= { dellNetTrapEventVarbindTable 1 }


DellNetTrapEventVarbindEntry ::= SEQUENCE {
    trapEventVarbindSeqId 	Integer32,
    trapEventVarbindId 		Integer32,
    trapEventVarbindOid		OBJECT IDENTIFIER,
    trapEventVarbindType 	Integer32,
    trapEventVarbindValue 	DisplayString
    }

trapEventVarbindSeqId OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "
         trapEventVarbindSeqId is a sequential ID and the index to
         varbind trap table.
        "
    ::= { dellNetTrapEventVarbindEntry 1 }

trapEventVarbindId OBJECT-TYPE
    SYNTAX Integer32 (1..32)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "
         trapEventVarbindId is the ID and the index to
         history trap table.
        "
    ::= { dellNetTrapEventVarbindEntry 2 }

trapEventVarbindOid OBJECT-TYPE
    SYNTAX OBJECT IDENTIFIER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The OID of this trap.
        "
    ::= { dellNetTrapEventVarbindEntry 3 }

trapEventVarbindType OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap category type.
        "
    ::= { dellNetTrapEventVarbindEntry 4 }

trapEventVarbindValue OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         This is the result or data in this trap.
        "
    ::= { dellNetTrapEventVarbindEntry 5 }

END