-- ***************************************************************************** -- draft-ietf-idr-bgp4-mibv2-05.txt -- -- Copyright (c) 2005 The Internet Society. -- Copyright (c) 2007 Force10 Networks, Inc. -- -- All rights reserved. -- ***************************************************************************** FORCE10-BGP4-V2-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Gauge32, mib-2, Unsigned32, Integer32, TimeTicks FROM SNMPv2-SMI InetAddressType, InetAddress, InetPortNumber, InetAutonomousSystemNumber, InetAddressPrefixLength FROM INET-ADDRESS-MIB TEXTUAL-CONVENTION, TruthValue, RowPointer, StorageType, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB f10Experiment FROM FORCE10-SMI; f10BgpM2 MODULE-IDENTITY LAST-UPDATED "200704271200Z" -- April 27, 2007 12:00:00 EDT ORGANIZATION "IETF IDR Working Group" CONTACT-INFO "E-mail: idr@merit.net Jeffrey Haas (Editor) 825 Victors Way, Suite 100 Ann Arbor, MI 48108 Tel: +1 734 222-1600 Fax: +1 734 222-1602 E-mail: jhaas@nexthop.com" DESCRIPTION "This MIB module defines management objects for the Border Gateway Protocol, Version 4." REVISION "200704271200Z" -- April 27, 2007 12:00:00 EDT DESCRIPTION "This is a Force10 proprietary vesrion of the draft-ietf-idr-bgp4-mibv2-05.txt MIB as proposed by the IETF Inter-Domain Routing Working Group. This mib will be obsolete when IANA-number is assigned. The following objects are added by Force10. - Added to BgpM2PeerCounterstable f10BgpM2PeerInKeepalives, f10BgpM2PeerOutKeepalives, f10BgpM2PeerInOpen, f10BgpM2PeerOutOpen, f10BgpM2PeerInRteRefresh, f10BgpM2PeerOutRteRefresh - Added to BgpM2PrefixCountersTable f10BgpM2PrefixWdrawnByPeer, f10BgpM2PrefixWdrawnFromPeer" -- ::= { mib-2 XXX } ::= { f10Experiment 1 } F10BgpM2Identifier ::= TEXTUAL-CONVENTION DISPLAY-HINT "1d." STATUS current DESCRIPTION "The representation of a BGP Identifier. The BGP Identifier should be represented in the OCTET STRING as with the first OCTET of the string containing the first OCTET of the BGP Identifier received or sent in the OPEN packet and so on. Even though the BGP Identifier is trending away from an IP address it is still displayed as if it was one, even when it would be an illegal IP address." SYNTAX OCTET STRING(SIZE (4)) F10BgpM2Afi ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The representation of a BGP AFI" SYNTAX Unsigned32(0..65535) F10BgpM2Safi ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The representation of a BGP SAFI" SYNTAX Unsigned32(0..255) F10BgpM2Community ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d:" STATUS current DESCRIPTION "The representation of a BGP Community." SYNTAX OCTET STRING(SIZE(4)) F10BgpM2ExtendedCommunity ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x:" STATUS current DESCRIPTION "The representation of a BGP Extended Community." SYNTAX OCTET STRING(SIZE(8)) f10BgpM2BaseScalars OBJECT IDENTIFIER ::= { f10BgpM2 1 } -- -- Notifications -- f10BgpM2BaseNotifications OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 0 } f10BgpM2Established NOTIFICATION-TYPE OBJECTS { f10BgpM2PeerLocalAddrType, f10BgpM2PeerLocalAddr, f10BgpM2PeerRemoteAddrType, f10BgpM2PeerRemoteAddr, f10BgpM2PeerLastErrorReceived, f10BgpM2PeerState } STATUS current DESCRIPTION "The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state." ::= { f10BgpM2BaseNotifications 1 } f10BgpM2BackwardTransition NOTIFICATION-TYPE OBJECTS { f10BgpM2PeerLocalAddrType, f10BgpM2PeerLocalAddr, f10BgpM2PeerRemoteAddrType, f10BgpM2PeerRemoteAddr, f10BgpM2PeerLastErrorReceived, f10BgpM2PeerLastErrorReceivedText, f10BgpM2PeerState } STATUS current DESCRIPTION "The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state." ::= { f10BgpM2BaseNotifications 2 } -- -- BGP Supported Version Table -- f10BgpM2Version OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 1 } f10BgpM2VersionTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2VersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of supported BGP versions." ::= { f10BgpM2Version 1 } f10BgpM2VersionEntry OBJECT-TYPE SYNTAX F10BgpM2VersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a given supported version of the Border Gateway Protocol and the level of support provided. It is expected that any agent implementation supporting this MIB module will report support for Version 4 of the Border Gateway Protocol at the very minimum." INDEX { f10BgpM2VersionIndex } ::= { f10BgpM2VersionTable 1 } F10BgpM2VersionEntry ::= SEQUENCE { f10BgpM2VersionIndex Unsigned32, f10BgpM2VersionSupported TruthValue } f10BgpM2VersionIndex OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the BGP Protocol." ::= { f10BgpM2VersionEntry 1 } f10BgpM2VersionSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if this version of the BGP protocol identified in 'f10BgpM2VersionIndex' is supported. The absence of a row for a particular f10BgpM2VersionIndex indicates that that f10BgpM2VersionIndex protocol version number is not supported." ::= { f10BgpM2VersionEntry 2 } -- -- Supported BGP Capabilities -- f10BgpM2SupportedCapabilities OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 2 } f10BgpM2CapabilitySupportAvailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if capability support is available and is enabled." ::= { f10BgpM2SupportedCapabilities 1 } f10BgpM2SupportedCapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2SupportedCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of supported BGP-4 capabilities." ::= { f10BgpM2SupportedCapabilities 2 } f10BgpM2SupportedCapabilitiesEntry OBJECT-TYPE SYNTAX F10BgpM2SupportedCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about supported capabilities indexed by capability number." INDEX { f10BgpM2SupportedCapabilityCode } ::= { f10BgpM2SupportedCapabilitiesTable 1 } F10BgpM2SupportedCapabilityEntry ::= SEQUENCE { f10BgpM2SupportedCapabilityCode Unsigned32, f10BgpM2SupportedCapability TruthValue } f10BgpM2SupportedCapabilityCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of supported capability. The index directly corresponds with the BGP-4 Capability Advertisement Capability Code." ::= { f10BgpM2SupportedCapabilitiesEntry 1 } f10BgpM2SupportedCapability OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is True if this capability is supported, False otherwise." ::= { f10BgpM2SupportedCapabilitiesEntry 2 } -- -- Base Scalars -- f10BgpM2AsSize OBJECT-TYPE SYNTAX INTEGER { twoOctet(1), fourOctet(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the AS value in this implementation. The semantics of this are determined as per the as-4bytes draft." REFERENCE "draft-ietf-idr-as4bytes-04" ::= { f10BgpM2BaseScalars 4 } f10BgpM2LocalAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The local autonomous system number. If the f10BgpM2AsSize is twoOctet, then the range is constrained to be 0-65535." ::= { f10BgpM2BaseScalars 5 } f10BgpM2LocalIdentifier OBJECT-TYPE SYNTAX F10BgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier." ::= { f10BgpM2BaseScalars 6 } -- -- Base Scalar Extensions -- f10BgpM2BaseScalarExtensions OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 7 } f10BgpM2BaseScalarNonCapExts OBJECT IDENTIFIER ::= { f10BgpM2BaseScalarExtensions 1 } f10BgpM2BaseScalarCapExts OBJECT IDENTIFIER ::= { f10BgpM2BaseScalarExtensions 2 } -- -- Base Scalar Route Reflection Extensions -- f10BgpM2BaseScalarRouteReflectExts OBJECT IDENTIFIER ::= { f10BgpM2BaseScalarNonCapExts 2796 } f10BgpM2RouteReflector OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if this implementation supports the BGP Route Reflection Extension and is enabled as a route reflector. If the BGP Route Reflection extension is not supported this value must be FALSE." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { f10BgpM2BaseScalarRouteReflectExts 1 } f10BgpM2ClusterId OBJECT-TYPE SYNTAX F10BgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's F10BgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { f10BgpM2BaseScalarRouteReflectExts 2 } -- -- Base Scalar AS Confederation Extensions -- f10BgpM2BaseScalarASConfedExts OBJECT IDENTIFIER ::= { f10BgpM2BaseScalarNonCapExts 3065 } f10BgpM2ConfederationRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if this implementation supports the BGP AS Confederations Extension and this router is configured to be in a confederation." REFERENCE "RFC 3065 - Autonomous System Confederations for BGP" ::= { f10BgpM2BaseScalarASConfedExts 1 } f10BgpM2ConfederationId OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router." REFERENCE "RFC 3065 - Autonomous System Confederations for BGP" ::= { f10BgpM2BaseScalarASConfedExts 2 } -- -- Base Configuration Objects -- f10BgpM2BaseScalarConfiguration OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 8 } f10BgpM2CfgBaseScalarStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the intended storage type for all configurable base scalars." ::= { f10BgpM2BaseScalarConfiguration 1 } f10BgpM2CfgLocalAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-write STATUS current DESCRIPTION "The local autonomous system number. If the f10BgpM2AsSize is twoOctet, then the range is constrained to be 0-65535." ::= { f10BgpM2BaseScalarConfiguration 2 } f10BgpM2CfgLocalIdentifier OBJECT-TYPE SYNTAX F10BgpM2Identifier MAX-ACCESS read-write STATUS current DESCRIPTION "The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier." ::= { f10BgpM2BaseScalarConfiguration 3 } -- -- Base Scalar Extensions -- f10BgpM2CfgBaseScalarExtensions OBJECT IDENTIFIER ::= { f10BgpM2BaseScalarConfiguration 4 } f10BgpM2CfgBaseScalarNonCapExts OBJECT IDENTIFIER ::= { f10BgpM2CfgBaseScalarExtensions 1 } f10BgpM2CfgBaseScalarCapExts OBJECT IDENTIFIER ::= { f10BgpM2CfgBaseScalarExtensions 2 } -- -- Base Scalar Route Reflection Extensions -- f10BgpM2CfgBaseScalarReflectorExts OBJECT IDENTIFIER ::= { f10BgpM2CfgBaseScalarNonCapExts 2796 } f10BgpM2CfgRouteReflector OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This value is set to true if this implementation will be supporting route reflection." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { f10BgpM2CfgBaseScalarReflectorExts 1 } f10BgpM2CfgClusterId OBJECT-TYPE SYNTAX F10BgpM2Identifier MAX-ACCESS read-write STATUS current DESCRIPTION "The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's F10BgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { f10BgpM2CfgBaseScalarReflectorExts 2 } -- -- Base Scalar AS Confederation Extensions -- f10BgpM2CfgBaseScalarASConfedExts OBJECT IDENTIFIER ::= { f10BgpM2CfgBaseScalarNonCapExts 3065 } f10BgpM2CfgConfederationRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This value is set to true if this implementation will be supporting BGP AS Confederations." REFERENCE "RFC 3065 - Autonomous System Confederations for BGP" ::= { f10BgpM2CfgBaseScalarASConfedExts 1 } f10BgpM2CfgConfederationId OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-write STATUS current DESCRIPTION "The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router." REFERENCE "RFC 3065 - Autonomous System Confederations for BGP" ::= { f10BgpM2CfgBaseScalarASConfedExts 2 } -- -- BGP Peer Data -- f10BgpM2Peer OBJECT IDENTIFIER ::= { f10BgpM2 2 } f10BgpM2PeerData OBJECT IDENTIFIER ::= { f10BgpM2Peer 1 } f10BgpM2PeerTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP peer table. This table contains, one entry per remote BGP peer, any information about the connections with the remote BGP peers." ::= { f10BgpM2PeerData 1 } f10BgpM2PeerEntry OBJECT-TYPE SYNTAX F10BgpM2PeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the connection with a remote BGP peer." INDEX { f10BgpM2PeerInstance, f10BgpM2PeerLocalAddrType, f10BgpM2PeerLocalAddr, f10BgpM2PeerRemoteAddrType, f10BgpM2PeerRemoteAddr } ::= { f10BgpM2PeerTable 1 } F10BgpM2PeerEntry ::= SEQUENCE { f10BgpM2PeerInstance Unsigned32, f10BgpM2PeerIdentifier F10BgpM2Identifier, f10BgpM2PeerState INTEGER, f10BgpM2PeerStatus INTEGER, f10BgpM2PeerConfiguredVersion Unsigned32, f10BgpM2PeerNegotiatedVersion Unsigned32, f10BgpM2PeerLocalAddrType InetAddressType, f10BgpM2PeerLocalAddr InetAddress, f10BgpM2PeerLocalPort InetPortNumber, f10BgpM2PeerLocalAs InetAutonomousSystemNumber, f10BgpM2PeerRemoteAddrType InetAddressType, f10BgpM2PeerRemoteAddr InetAddress, f10BgpM2PeerRemotePort InetPortNumber, f10BgpM2PeerRemoteAs InetAutonomousSystemNumber, f10BgpM2PeerIndex Unsigned32 } f10BgpM2PeerInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes RFC 2547 PE-CE routers. Implementations that do not support multiple routing instances should return 1 for this object. XXX TODO - We need to provide a way to configure these in the peer configuration table." ::= { f10BgpM2PeerEntry 1 } f10BgpM2PeerIdentifier OBJECT-TYPE SYNTAX F10BgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the f10BgpM2PeerState is in the OpenConfirm or the Established state." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 4.2" ::= { f10BgpM2PeerEntry 2 } f10BgpM2PeerState OBJECT-TYPE SYNTAX INTEGER { idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The remote BGP peer's FSM state." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 8" ::= { f10BgpM2PeerEntry 3 } f10BgpM2PeerStatus OBJECT-TYPE SYNTAX INTEGER { halted(1), running(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The f10BgpM2PeerState will generally be in the idle state when the FSM is halted, although some extensions such as Graceful Restart will leave the peer in the Idle state but with the FSM running." ::= { f10BgpM2PeerEntry 4 } f10BgpM2PeerConfiguredVersion OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol." ::= { f10BgpM2PeerEntry 5 } f10BgpM2PeerNegotiatedVersion OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated version of BGP running between the two peers." ::= { f10BgpM2PeerEntry 6 } f10BgpM2PeerLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address family of the local end of the peering session." ::= { f10BgpM2PeerEntry 7 } f10BgpM2PeerLocalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the local end of the peering session." ::= { f10BgpM2PeerEntry 8 } f10BgpM2PeerLocalPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The local port for the TCP connection between the BGP peers." ::= { f10BgpM2PeerEntry 9 } f10BgpM2PeerLocalAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Some implementations of BGP can represent themselves as multiple ASs. This is the AS that this peering session is representing itself as to the remote peer." ::= { f10BgpM2PeerEntry 10 } f10BgpM2PeerRemoteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address family of the remote end of the peering session." ::= { f10BgpM2PeerEntry 11 } f10BgpM2PeerRemoteAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the remote end of the peering session." ::= { f10BgpM2PeerEntry 12 } f10BgpM2PeerRemotePort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The remote port for the TCP connection between the BGP peers. In the case of a transport for which the notion of 'port' is irrelevant, an instance value of -1 should be returned by the agent for this object. Note that the objects f10BgpM2PeerLocalAddr, f10BgpM2PeerLocalPort, f10BgpM2PeerRemoteAddr and f10BgpM2PeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. or even the ipv6 TCP MIB as in rfc2452." REFERENCE "RFC 2012 - SNMPv2 Management Information Base for the Transmission Control Protocol using SMIv2. RFC 2542 - IP Version 6 Management Information Base for the Transmission Control Protocol." ::= { f10BgpM2PeerEntry 13 } f10BgpM2PeerRemoteAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The remote autonomous system number." ::= { f10BgpM2PeerEntry 14 } f10BgpM2PeerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value is a unique index for the remote peer entry in the f10BgpM2PeerTable. It is assigned by the agent at the point of creation of the f10BgpM2PeerTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2PeerIndex row instance values across rows of the f10BgpM2PeerTable. It is used to provide an index structure for other tables whose data is logically per-peer. For explicitly configured peers, this value will remain consistent until this row is deleted by deleting the configured peers. Unconfigured peers will generate a monotonically increasing number when a BGP FSM is built to process the peering session. Values in the f10BgpM2PeerTable and other tables utilizing f10BgpM2PeerIndex are expected to remain in existence for an arbitrary time after the unconfigured peer has been deleted in order to allow management applications to extract useful management information for those peers. Thus, an unconfigured peer using the same indices as the f10BgpM2PeerTable that comes up while this row still exists will re-utilize the same row." ::= { f10BgpM2PeerEntry 15 } -- -- Errors -- f10BgpM2PeerErrors OBJECT IDENTIFIER ::= { f10BgpM2Peer 2 } f10BgpM2PeerErrorsTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PeerErrorsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "On a per peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer, by its f10BgpM2PeerIndex, exists in this table, then no such errors have been observed, reported, and recorded on the session." ::= { f10BgpM2PeerErrors 1 } f10BgpM2PeerErrorsEntry OBJECT-TYPE SYNTAX F10BgpM2PeerErrorsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about errors sent and received for a particular BGP peer." AUGMENTS { f10BgpM2PeerEntry } ::= { f10BgpM2PeerErrorsTable 1 } F10BgpM2PeerErrorsEntry ::= SEQUENCE { f10BgpM2PeerLastErrorReceived OCTET STRING, f10BgpM2PeerLastErrorSent OCTET STRING, f10BgpM2PeerLastErrorReceivedTime TimeTicks, f10BgpM2PeerLastErrorSentTime TimeTicks, f10BgpM2PeerLastErrorReceivedText SnmpAdminString, f10BgpM2PeerLastErrorSentText SnmpAdminString, f10BgpM2PeerLastErrorReceivedData OCTET STRING, f10BgpM2PeerLastErrorSentData OCTET STRING } f10BgpM2PeerLastErrorReceived OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code and subcode received by this BGP Speaker via a NOTIFICATION message for this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { f10BgpM2PeerErrorsEntry 1 } f10BgpM2PeerLastErrorSent OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code and subcode sent by this BGP Speaker via a NOTIFICATION message to this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { f10BgpM2PeerErrorsEntry 2 } f10BgpM2PeerLastErrorReceivedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp that the last NOTIFICATION was received from this peer." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { f10BgpM2PeerErrorsEntry 3 } f10BgpM2PeerLastErrorSentTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp that the last NOTIFICATION was sent to this peer." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { f10BgpM2PeerErrorsEntry 4 } f10BgpM2PeerLastErrorReceivedText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an implementation specific explanation of the error that was reported." ::= { f10BgpM2PeerErrorsEntry 5 } f10BgpM2PeerLastErrorSentText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an implementation specific explanation of the error that is being reported." ::= { f10BgpM2PeerErrorsEntry 6 } f10BgpM2PeerLastErrorReceivedData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4075)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code's data seen by this peer." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { f10BgpM2PeerErrorsEntry 7 } f10BgpM2PeerLastErrorSentData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4075)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code's data sent to this peer." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { f10BgpM2PeerErrorsEntry 8 } -- -- Peer Event Times -- f10BgpM2PeerTimers OBJECT IDENTIFIER ::= { f10BgpM2Peer 3 } f10BgpM2PeerEventTimesTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PeerEventTimesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the Established state." ::= { f10BgpM2PeerTimers 1 } f10BgpM2PeerEventTimesEntry OBJECT-TYPE SYNTAX F10BgpM2PeerEventTimesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains a set of statistics about time spent and events encountered in the peer session Established state." AUGMENTS { f10BgpM2PeerEntry } ::= { f10BgpM2PeerEventTimesTable 1 } F10BgpM2PeerEventTimesEntry ::= SEQUENCE { f10BgpM2PeerFsmEstablishedTime Gauge32, f10BgpM2PeerInUpdatesElapsedTime Gauge32 } f10BgpM2PeerFsmEstablishedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted." ::= { f10BgpM2PeerEventTimesEntry 1 } f10BgpM2PeerInUpdatesElapsedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time f10BgpM2PeerInUpdates is incremented, the value of this object is set to zero (0). This value shall also be zero (0) when the peer is not in the Established state" ::= { f10BgpM2PeerEventTimesEntry 2 } -- -- Peer Configured Timers -- f10BgpM2PeerConfiguredTimersTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PeerConfiguredTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Per peer management data on BGP session timers." ::= { f10BgpM2PeerTimers 2 } f10BgpM2PeerConfiguredTimersEntry OBJECT-TYPE SYNTAX F10BgpM2PeerConfiguredTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to the current state of BGP timers on a given peering session." AUGMENTS { f10BgpM2PeerEntry } ::= { f10BgpM2PeerConfiguredTimersTable 1 } F10BgpM2PeerConfiguredTimersEntry ::= SEQUENCE { f10BgpM2PeerConnectRetryInterval Unsigned32, f10BgpM2PeerHoldTimeConfigured Unsigned32, f10BgpM2PeerKeepAliveConfigured Unsigned32, f10BgpM2PeerMinASOrigInterval Unsigned32, f10BgpM2PeerMinRouteAdverInterval Unsigned32 } f10BgpM2PeerConnectRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds." ::= { f10BgpM2PeerConfiguredTimersEntry 1 } f10BgpM2PeerHoldTimeConfigured OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 3..65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (f10BgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds." REFERENCE "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" ::= { f10BgpM2PeerConfiguredTimersEntry 2 } f10BgpM2PeerKeepAliveConfigured OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 1..21845 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in f10BgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by f10BgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of f10BgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds." REFERENCE "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" ::= { f10BgpM2PeerConfiguredTimersEntry 3 } f10BgpM2PeerMinASOrigInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds." ::= { f10BgpM2PeerConfiguredTimersEntry 4 } f10BgpM2PeerMinRouteAdverInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds." ::= { f10BgpM2PeerConfiguredTimersEntry 5 } -- -- Peer Negotiated Timers -- f10BgpM2PeerNegotiatedTimersTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PeerNegotiatedTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current values of per-peer timers which can be dynamically set in the f10BgpM2PeerConfiguredTimersTable. Values reflected in this table are the current operational values, after negotiation from values derived from initial configuration or last set from f10BgpM2PeerConfiguredTimersTable row instances." ::= { f10BgpM2PeerTimers 3 } f10BgpM2PeerNegotiatedTimersEntry OBJECT-TYPE SYNTAX F10BgpM2PeerNegotiatedTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry reflects a value of the currently operational, negotiated timers as reflected in the F10BgpM2PeerNegotiatedTimersEntry." AUGMENTS { f10BgpM2PeerEntry } ::= { f10BgpM2PeerNegotiatedTimersTable 1 } F10BgpM2PeerNegotiatedTimersEntry ::= SEQUENCE { f10BgpM2PeerHoldTime Unsigned32, f10BgpM2PeerKeepAlive Unsigned32 } f10BgpM2PeerHoldTime OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 3..65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages are sent and the Hold Timer is not set. At least three (3). This value is the smaller of the value sent by this peer in the OPEN message and f10BgpM2PeerHoldTimeConfigured for this peer. This value is only defined when the peering session is in the Established state." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 4.2" ::= { f10BgpM2PeerNegotiatedTimersEntry 1 } f10BgpM2PeerKeepAlive OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 1..21845 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with f10BgpM2PeerHoldTime, it has the same proportion as what f10BgpM2PeerKeepAliveConfigured has when compared with f10BgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of f10BgpM2PeerKeepAliveConfigured is zero (0). This value is only defined when the peering session is in the Established state." REFERENCE "draft-ietf-idr-bgp4-17, Sec. 4.4" ::= { f10BgpM2PeerNegotiatedTimersEntry 2 } -- -- Peer Capabilities -- f10BgpM2PeerCapabilities OBJECT IDENTIFIER ::= { f10BgpM2Peer 4 } -- -- Announced Capabilities -- f10BgpM2PeerCapsAnnouncedTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PeerCapsAnnouncedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the capabilities that are supported for a given peer." ::= { f10BgpM2PeerCapabilities 1 } f10BgpM2PeerCapsAnnouncedEntry OBJECT-TYPE SYNTAX F10BgpM2PeerCapsAnnouncedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code" INDEX { f10BgpM2PeerIndex, f10BgpM2PeerCapAnnouncedCode, f10BgpM2PeerCapAnnouncedIndex } ::= { f10BgpM2PeerCapsAnnouncedTable 1 } F10BgpM2PeerCapsAnnouncedEntry ::= SEQUENCE { f10BgpM2PeerCapAnnouncedCode Unsigned32, f10BgpM2PeerCapAnnouncedIndex Unsigned32, f10BgpM2PeerCapAnnouncedValue OCTET STRING } f10BgpM2PeerCapAnnouncedCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Capability Advertisement Capability Code." ::= { f10BgpM2PeerCapsAnnouncedEntry 1 } f10BgpM2PeerCapAnnouncedIndex OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them." ::= { f10BgpM2PeerCapsAnnouncedEntry 2 } f10BgpM2PeerCapAnnouncedValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the announced capability." ::= { f10BgpM2PeerCapsAnnouncedEntry 3 } -- -- Received Capabilities -- f10BgpM2PeerCapsReceivedTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM24PeerCapsReceivedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the capabilities that are supported for a given peer." ::= { f10BgpM2PeerCapabilities 2 } f10BgpM2PeerCapsReceivedEntry OBJECT-TYPE SYNTAX F10BgpM24PeerCapsReceivedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code" INDEX { f10BgpM2PeerIndex, f10BgpM2PeerCapReceivedCode, f10BgpM2PeerCapReceivedIndex } ::= { f10BgpM2PeerCapsReceivedTable 1 } F10BgpM24PeerCapsReceivedEntry ::= SEQUENCE { f10BgpM2PeerCapReceivedCode Unsigned32, f10BgpM2PeerCapReceivedIndex Unsigned32, f10BgpM2PeerCapReceivedValue OCTET STRING } f10BgpM2PeerCapReceivedCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Capability Advertisement Capability Code." ::= { f10BgpM2PeerCapsReceivedEntry 1 } f10BgpM2PeerCapReceivedIndex OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them." ::= { f10BgpM2PeerCapsReceivedEntry 2 } f10BgpM2PeerCapReceivedValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the announced capability." ::= { f10BgpM2PeerCapsReceivedEntry 3 } -- -- Per-peer counters -- f10BgpM2PeerCounters OBJECT IDENTIFIER ::= { f10BgpM2Peer 6 } f10BgpM2PeerCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PeerCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The counters associated with a BGP Peer." ::= { f10BgpM2PeerCounters 1 } f10BgpM2PeerCountersEntry OBJECT-TYPE SYNTAX F10BgpM2PeerCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session." AUGMENTS { f10BgpM2PeerEntry } ::= { f10BgpM2PeerCountersTable 1 } F10BgpM2PeerCountersEntry ::= SEQUENCE { f10BgpM2PeerInUpdates Counter32, f10BgpM2PeerOutUpdates Counter32, f10BgpM2PeerInTotalMessages Counter32, f10BgpM2PeerOutTotalMessages Counter32, f10BgpM2PeerFsmEstablishedTrans Counter32, f10BgpM2PeerInKeepalives Counter32, f10BgpM2PeerOutKeepalives Counter32, f10BgpM2PeerInOpen Counter32, f10BgpM2PeerOutOpen Counter32, f10BgpM2PeerInRteRefresh Counter32, f10BgpM2PeerOutRteRefresh Counter32 } -- +++wayne need to describe what happens if connection is broken -- and then reestablished. Does the prior counter value accumulate? f10BgpM2PeerInUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established." ::= { f10BgpM2PeerCountersEntry 1 } f10BgpM2PeerOutUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established." ::= { f10BgpM2PeerCountersEntry 2 } f10BgpM2PeerInTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established." ::= { f10BgpM2PeerCountersEntry 3 } f10BgpM2PeerOutTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established." ::= { f10BgpM2PeerCountersEntry 4 } f10BgpM2PeerFsmEstablishedTrans OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the BGP FSM transitioned into the established state for this peer." ::= { f10BgpM2PeerCountersEntry 5 } f10BgpM2PeerInKeepalives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Keepalive messages received from a peer.Implemented by Force10." ::= { f10BgpM2PeerCountersEntry 6 } f10BgpM2PeerOutKeepalives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Keepalive messages sent to a peer. Implemented by Force10." ::= { f10BgpM2PeerCountersEntry 7 } f10BgpM2PeerInOpen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Open messages received from a peer. Implemented by Force10." ::= { f10BgpM2PeerCountersEntry 8 } f10BgpM2PeerOutOpen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Open messages sent to a peer. Implemented by Force10." ::= { f10BgpM2PeerCountersEntry 9 } f10BgpM2PeerInRteRefresh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Route Refresh messages received from a peer. Implemented by Force10." ::= { f10BgpM2PeerCountersEntry 10 } f10BgpM2PeerOutRteRefresh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Route Refresh messages sent to a peer. Implemented by Force10." ::= { f10BgpM2PeerCountersEntry 11 } -- -- Per-Peer Prefix Counters -- f10BgpM2PrefixCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PrefixCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional per-peer, per AFI SAFI counters for prefixes" ::= { f10BgpM2PeerCounters 2 } f10BgpM2PrefixCountersEntry OBJECT-TYPE SYNTAX F10BgpM2PrefixCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about a bgp-peers prefix counters." INDEX { f10BgpM2PeerIndex, f10BgpM2PrefixCountersAfi, f10BgpM2PrefixCountersSafi } ::= { f10BgpM2PrefixCountersTable 1 } F10BgpM2PrefixCountersEntry ::= SEQUENCE { f10BgpM2PrefixCountersAfi F10BgpM2Afi, f10BgpM2PrefixCountersSafi F10BgpM2Safi, f10BgpM2PrefixInPrefixes Gauge32, f10BgpM2PrefixInPrefixesAccepted Gauge32, f10BgpM2PrefixInPrefixesRejected Gauge32, f10BgpM2PrefixOutPrefixes Gauge32, f10BgpM2PrefixWdrawnByPeer Gauge32, f10BgpM2PrefixWdrawnFromPeer Gauge32 } f10BgpM2PrefixCountersAfi OBJECT-TYPE SYNTAX F10BgpM2Afi MAX-ACCESS read-only STATUS current DESCRIPTION "The AFI index of the per-peer, per prefix counters" ::= { f10BgpM2PrefixCountersEntry 1 } f10BgpM2PrefixCountersSafi OBJECT-TYPE SYNTAX F10BgpM2Safi MAX-ACCESS read-only STATUS current DESCRIPTION "The SAFI index of the per-peer, per prefix counters" ::= { f10BgpM2PrefixCountersEntry 2 } f10BgpM2PrefixInPrefixes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer." -- jmh - note that we are allowing stuff to be discarded ::= { f10BgpM2PrefixCountersEntry 7 } f10BgpM2PrefixInPrefixesAccepted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib." ::= { f10BgpM2PrefixCountersEntry 8 } f10BgpM2PrefixInPrefixesRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes for a peer that are installed in the Adj-Ribs-In and are NOT eligible to become active in the Loc-Rib." ::= { f10BgpM2PrefixCountersEntry 9 } f10BgpM2PrefixOutPrefixes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes for a peer that are installed in that peers Adj-Ribs-Out." ::= { f10BgpM2PrefixCountersEntry 10 } f10BgpM2PrefixWdrawnByPeer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes withdrawn by a peer. Implemened by Force10." ::= { f10BgpM2PrefixCountersEntry 11 } f10BgpM2PrefixWdrawnFromPeer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes withdrawn from a peer. Implemened by Force10." ::= { f10BgpM2PrefixCountersEntry 12 } f10BgpM2PeerExtensions OBJECT IDENTIFIER ::= { f10BgpM2Peer 7 } f10BgpM2PeerNonCapExts OBJECT IDENTIFIER ::= { f10BgpM2PeerExtensions 1 } f10BgpM2PeerCapExts OBJECT IDENTIFIER ::= { f10BgpM2PeerExtensions 2 } -- -- Peer Route Reflection Extensions -- f10BgpM2PeerRouteReflectionExts OBJECT IDENTIFIER ::= { f10BgpM2PeerNonCapExts 2796 } f10BgpM2PeerReflectorClientTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PeerReflectorClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of route reflection client settings on a per-peer basis." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { f10BgpM2PeerRouteReflectionExts 1 } f10BgpM2PeerReflectorClientEntry OBJECT-TYPE SYNTAX F10BgpM2PeerReflectorClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client." REFERENCE "RFC 2796 - BGP Route Reflection" AUGMENTS { f10BgpM2PeerEntry } ::= { f10BgpM2PeerReflectorClientTable 1 } F10BgpM2PeerReflectorClientEntry ::= SEQUENCE { f10BgpM2PeerReflectorClient INTEGER } f10BgpM2PeerReflectorClient OBJECT-TYPE SYNTAX INTEGER { nonClient(0), client(1), meshedClient(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { f10BgpM2PeerReflectorClientEntry 1 } -- -- Peer AS Confederations Extensions -- f10BgpM2PeerASConfederationExts OBJECT IDENTIFIER ::= { f10BgpM2PeerNonCapExts 3065 } f10BgpM2PeerConfedMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PeerConfedMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of confederation member settings on a per-peer basis." REFERENCE "RFC 3065 - BGP Confederations" ::= { f10BgpM2PeerASConfederationExts 1 } f10BgpM2PeerConfedMemberEntry OBJECT-TYPE SYNTAX F10BgpM2PeerConfedMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member." REFERENCE "RFC 3065 - BGP Confederations" AUGMENTS { f10BgpM2PeerEntry } ::= { f10BgpM2PeerConfedMemberTable 1 } F10BgpM2PeerConfedMemberEntry ::= SEQUENCE { f10BgpM2PeerConfedMember TruthValue } f10BgpM2PeerConfedMember OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates whether the given peer is in our confederation or not." REFERENCE "RFC 3065 - BGP Confederations" ::= { f10BgpM2PeerConfedMemberEntry 1 } -- -- Peer configuration objects -- f10BgpM2PeerConfiguration OBJECT IDENTIFIER ::= { f10BgpM2Peer 8 } -- -- Administering activated peering sessions -- f10BgpM2CfgPeerAdminStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2CfgPeerAdminStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing rows for administratively starting and stopping peering sessions." ::= { f10BgpM2PeerConfiguration 1 } f10BgpM2CfgPeerAdminStatusEntry OBJECT-TYPE SYNTAX F10BgpM2CfgPeerAdminStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing row for administratively starting and stopping peers." INDEX { f10BgpM2PeerIndex } ::= { f10BgpM2CfgPeerAdminStatusTable 1 } F10BgpM2CfgPeerAdminStatusEntry ::= SEQUENCE { f10BgpM2CfgPeerAdminStatus INTEGER } f10BgpM2CfgPeerAdminStatus OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the Manual Stop and Manual Start events to be sent to an activated peering session." ::= { f10BgpM2CfgPeerAdminStatusEntry 1 } -- -- Peer Configuration -- f10BgpM2CfgPeerNextIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the next appropriate value to use as an index for creation of a row instance in in the f10BgpM2CfgPeerTable. If the number of available entries in the f10BgpM2CfgPeerTable is exhausted, a retrieval value of this object instance will return 0. A value of 0 may also be returned if the agent is otherwise incapable of f10BgpM2CfgPeerTable row creation at the time of f10BgpM2CfgPeerNextIndex retrieval." ::= { f10BgpM2PeerConfiguration 2 } f10BgpM2CfgPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2CfgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP configuration peer table. This table allows the configuration of the parameters for a session with a BGP peer. +++wayne provide description of how config should be done for a peer per table." ::= { f10BgpM2PeerConfiguration 3 } f10BgpM2CfgPeerEntry OBJECT-TYPE SYNTAX F10BgpM2CfgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information set up by a management entity to configure a connection with a BGP peer." INDEX { f10BgpM2CfgPeerIndex } ::= { f10BgpM2CfgPeerTable 1 } F10BgpM2CfgPeerEntry ::= SEQUENCE { f10BgpM2CfgPeerConfiguredVersion Unsigned32, f10BgpM2CfgAllowVersionNegotiation TruthValue, f10BgpM2CfgPeerLocalAddrType InetAddressType, f10BgpM2CfgPeerLocalAddr InetAddress, f10BgpM2CfgPeerLocalAs InetAutonomousSystemNumber, f10BgpM2CfgPeerRemoteAddrType InetAddressType, f10BgpM2CfgPeerRemoteAddr InetAddress, f10BgpM2CfgPeerRemoteAs InetAutonomousSystemNumber, f10BgpM2CfgPeerEntryStorageType StorageType, f10BgpM2CfgPeerError INTEGER, f10BgpM2CfgPeerBgpPeerEntry RowPointer, f10BgpM2CfgPeerRowEntryStatus RowStatus, f10BgpM2CfgPeerIndex Integer32, f10BgpM2CfgPeerStatus INTEGER } f10BgpM2CfgPeerConfiguredVersion OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The configured version to originally start with this peer. The BGP speaker may permit negotiation to a lower version number of the protocol depending on the set value of f10BgpM2CfgAllowVersionNegotiation." DEFVAL { 4 } ::= { f10BgpM2CfgPeerEntry 1 } f10BgpM2CfgAllowVersionNegotiation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If set to true, during session establishment with this peer, negotiation to a version lower than that specified in f10BgpM2CfgPeerConfiguredVersion will be allowed." DEFVAL { false } ::= { f10BgpM2CfgPeerEntry 2 } f10BgpM2CfgPeerLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The address family of the speakers of this BGP session." ::= { f10BgpM2CfgPeerEntry 3 } f10BgpM2CfgPeerLocalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the local end of the peering session." ::= { f10BgpM2CfgPeerEntry 4 } f10BgpM2CfgPeerLocalAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Autonomous system represented to peer on peering session initialization. Some implementations of BGP can represent themselves as multiple ASes. These implementations can set this to an alternate autonomous system. If this object is set to zero (0) at the point this row instance is set to active, then the implementation will initialize this session representing itself as the value of f10BgpM2CfgLocalAs." DEFVAL { 0 } ::= { f10BgpM2CfgPeerEntry 5 } f10BgpM2CfgPeerRemoteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The address family of the speakers of the remote BGP session." ::= { f10BgpM2CfgPeerEntry 6 } f10BgpM2CfgPeerRemoteAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the remote end (destination address of peer) for peering session." ::= { f10BgpM2CfgPeerEntry 7 } f10BgpM2CfgPeerRemoteAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Autonomous system number of the remote peer." ::= { f10BgpM2CfgPeerEntry 8 } f10BgpM2CfgPeerEntryStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object type specifies the intended storage type for the f10BgpM2CfgPeerEntry row instance." ::= { f10BgpM2CfgPeerEntry 9 } f10BgpM2CfgPeerError OBJECT-TYPE SYNTAX INTEGER { unknown(0), notActivated (1), errDuplicatePeeringSession (2), activated (3) -- +++wayne more to follow } MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the current error status of the row denoting the configured error status. If this row is still under creation (has not been activated f10BgpM2CfgPeerRowEntryStatus), then this instance will be set to not-activated (1). At the point that the row is activated, f10BgpM2CfgPeerError will reflect the error status of the row data itself. If there is another session already activated with the same local and remote addresses as denoted by {f10BgpM2CfgPeerLocalAddrType, f10BgpM2CfgPeerLocalAddr, f10BgpM2CfgPeerRemoteAddr}, then the value of this will be set to err-duplicate-peering-session (2). If this row is associated with a peer session whose initialization has been attempted, the value will be set to activated (3) (and, f10BgpM2PeerCfgPeerEntry will be set to the row instance of the entry in the f10BgpM2PeerTable which reflects the state of the peering session). Note that this object only reflects the error as a function of the attempted activation of this row as containing data for a bgp peering session. The actual state of the session at the point of any protocol exchange or session state machine initiation is reflected in the f10BgpM2PeerTable row instance (as reflected through f10BgpM2CfgPeerPeerEntry) associated with this row instance." ::= { f10BgpM2CfgPeerEntry 10 } f10BgpM2CfgPeerBgpPeerEntry OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "Upon activation of the session data contained in this row instance, this object points to an instance of a row within the f10BgpM2PeerTable reflecting the session in its initializing or operational state. Retrieval of this column instance will always yield a value of {0.0} unless the session has successfully been activated (via f10BgpM2CfgPeerRowEntryStatus). Such row instances will always have a value of f10BgpM2CfgPeerError which is activated (3)." ::= { f10BgpM2CfgPeerEntry 11 } f10BgpM2CfgPeerRowEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object type is used to control creation, activation, and deletion of this row instance." -- +++wayne need better directions for agent auto-removal -- of row instances which have moved to active or error -- state ::= { f10BgpM2CfgPeerEntry 12 } f10BgpM2CfgPeerIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Uniquely identifies an instance of a peer row, as an element of configuration." ::= { f10BgpM2CfgPeerEntry 13 } f10BgpM2CfgPeerStatus OBJECT-TYPE SYNTAX INTEGER { halted(1), running(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the state of the peering session upon activation. If disabled, the FSM is in the halted state and no Automatic Start events are generated. If enabled, the FSM is in the running state and Automatic Start events may be generated." ::= { f10BgpM2CfgPeerEntry 14 } -- -- Per-peer timers table -- f10BgpM2CfgPeerTimersTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2CfgPeerTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for configuration of per-peer timers." ::= { f10BgpM2PeerConfiguration 4 } f10BgpM2CfgPeerTimersEntry OBJECT-TYPE SYNTAX F10BgpM2CfgPeerTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing per-peer timer configuration." AUGMENTS { f10BgpM2CfgPeerEntry } ::= { f10BgpM2CfgPeerTimersTable 1 } F10BgpM2CfgPeerTimersEntry ::= SEQUENCE { f10BgpM2CfgPeerConnectRetryInterval Unsigned32, f10BgpM2CfgPeerHoldTimeConfigured Unsigned32, f10BgpM2CfgPeerKeepAliveConfigured Unsigned32, f10BgpM2CfgPeerMinASOrigInterval Unsigned32, f10BgpM2CfgPeerMinRouteAdverInter Unsigned32 } f10BgpM2CfgPeerConnectRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds." DEFVAL { 120 } ::= { f10BgpM2CfgPeerTimersEntry 1 } f10BgpM2CfgPeerHoldTimeConfigured OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 3..65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (f10BgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds." REFERENCE "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" DEFVAL { 90 } ::= { f10BgpM2CfgPeerTimersEntry 2 } f10BgpM2CfgPeerKeepAliveConfigured OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 1..21845 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in f10BgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by f10BgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of f10BgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds." REFERENCE "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" DEFVAL { 30 } ::= { f10BgpM2CfgPeerTimersEntry 3 } f10BgpM2CfgPeerMinASOrigInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds." DEFVAL { 15 } ::= { f10BgpM2CfgPeerTimersEntry 4 } f10BgpM2CfgPeerMinRouteAdverInter OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds." DEFVAL { 30 } ::= { f10BgpM2CfgPeerTimersEntry 5 } -- -- Per-peer configuration extensions -- f10BgpM2CfgPeerExtensions OBJECT IDENTIFIER ::= { f10BgpM2PeerConfiguration 5 } f10BgpM2CfgPeerNonCapExts OBJECT IDENTIFIER ::= { f10BgpM2CfgPeerExtensions 1 } f10BgpM2CfgPeerCapExts OBJECT IDENTIFIER ::= { f10BgpM2CfgPeerExtensions 2 } -- -- Peer route reflection configuration -- f10BgpM2CfgPeerRouteReflectionExts OBJECT IDENTIFIER ::= { f10BgpM2CfgPeerNonCapExts 2796 } f10BgpM2CfgPeerReflectorClientTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2CfgPeerReflectorClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of route reflection client settings on a per-peer basis." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { f10BgpM2CfgPeerRouteReflectionExts 1 } f10BgpM2CfgPeerReflectorClientEntry OBJECT-TYPE SYNTAX F10BgpM2CfgPeerReflectorClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client." REFERENCE "RFC 2796 - BGP Route Reflection" AUGMENTS { f10BgpM2CfgPeerEntry } ::= { f10BgpM2CfgPeerReflectorClientTable 1 } F10BgpM2CfgPeerReflectorClientEntry ::= SEQUENCE { f10BgpM2CfgPeerReflectorClient INTEGER } f10BgpM2CfgPeerReflectorClient OBJECT-TYPE SYNTAX INTEGER { nonClient(0), client(1), meshedClient(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { f10BgpM2CfgPeerReflectorClientEntry 1 } -- -- Peer AS Confederations Extensions -- f10BgpM2CfgPeerASConfederationExts OBJECT IDENTIFIER ::= { f10BgpM2CfgPeerNonCapExts 3065 } f10BgpM2CfgPeerConfedMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2CfgPeerConfedMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of confederation member settings on a per-peer basis." REFERENCE "RFC 3065 - BGP Confederations" ::= { f10BgpM2CfgPeerASConfederationExts 1 } f10BgpM2CfgPeerConfedMemberEntry OBJECT-TYPE SYNTAX F10BgpM2CfgPeerConfedMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member." REFERENCE "RFC 3065 - BGP Confederations" AUGMENTS { f10BgpM2PeerEntry } ::= { f10BgpM2CfgPeerConfedMemberTable 1 } F10BgpM2CfgPeerConfedMemberEntry ::= SEQUENCE { f10BgpM2CfgPeerConfedMember TruthValue } f10BgpM2CfgPeerConfedMember OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This value indicates whether the given peer is in our confederation or not." REFERENCE "RFC 3065 - BGP Confederations" ::= { f10BgpM2CfgPeerConfedMemberEntry 1 } -- -- BGP NLRI Data -- f10BgpM2Rib OBJECT IDENTIFIER ::= { f10BgpM2 3 } -- -- NLRI Table -- f10BgpM2NlriTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2NlriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents the Adj-Ribs-In. The route where f10BgpM2NlriBest is TRUE represents, for this NLRI, the route that is installed in the LocRib from the Adj-Ribs-In." ::= { f10BgpM2Rib 1 } f10BgpM2NlriEntry OBJECT-TYPE SYNTAX F10BgpM2NlriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a path to a network." INDEX { f10BgpM2PeerIndex, f10BgpM2NlriAfi, f10BgpM2NlriSafi, f10BgpM2NlriPrefix, f10BgpM2NlriPrefixLen, f10BgpM2NlriIndex } ::= { f10BgpM2NlriTable 1 } F10BgpM2NlriEntry ::= SEQUENCE { f10BgpM2NlriIndex Unsigned32, f10BgpM2NlriAfi F10BgpM2Afi, f10BgpM2NlriSafi F10BgpM2Safi, f10BgpM2NlriPrefixType InetAddressType, f10BgpM2NlriPrefix InetAddress, f10BgpM2NlriPrefixLen InetAddressPrefixLength, f10BgpM2NlriBest TruthValue, f10BgpM2NlriCalcLocalPref Unsigned32, f10BgpM2PathAttrIndex Unsigned32, f10BgpM2NlriOpaqueType INTEGER, f10BgpM2NlriOpaquePointer RowPointer } f10BgpM2NlriIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This index allows for multiple instances of a base prefix for a certain AFI SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single route instance. 2. Allow for extensions which extend the NLRI field to send the same prefix while utilizing other extension specific information. An example of this is RFC 3107 - Carrying MPLS labels in BGP." REFERENCE "RFC 3107 - Carrying Label Information in BGP-4" ::= { f10BgpM2NlriEntry 1 } f10BgpM2NlriAfi OBJECT-TYPE SYNTAX F10BgpM2Afi MAX-ACCESS read-only STATUS current DESCRIPTION "The address family of the prefix for this NLRI." ::= { f10BgpM2NlriEntry 2 } f10BgpM2NlriSafi OBJECT-TYPE SYNTAX F10BgpM2Safi MAX-ACCESS read-only STATUS current DESCRIPTION "The subsequent address family of the prefix for this NLRI" REFERENCE "RFC 2858 - Multiprotocol Extensions for BGP-4" ::= { f10BgpM2NlriEntry 3 } f10BgpM2NlriPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the f10BgpM2NlriAfi field. Where an appropriate InetAddressType is not available, the value of the object must be unknown(0). XXX TODO - This seems like a hack." ::= { f10BgpM2NlriEntry 4 } f10BgpM2NlriPrefix OBJECT-TYPE SYNTAX InetAddress (SIZE (4..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by f10BgpM2PathAttrAddrPrefixLen. Any bits beyond the length specified by f10BgpM2PathAttrAddrPrefixLen are zeroed." ::= { f10BgpM2NlriEntry 5 } f10BgpM2NlriPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "Length in bits of the address prefix in the Network Layer Reachability Information field." ::= { f10BgpM2NlriEntry 6 } f10BgpM2NlriBest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether or not this route was chosen as the best BGP4 route." ::= { f10BgpM2NlriEntry 7 } f10BgpM2NlriCalcLocalPref OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The degree of preference calculated by the receiving BGP4 speaker for an advertised route." ::= { f10BgpM2NlriEntry 8 } f10BgpM2PathAttrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value is a unique index for the per-NLRI entry in the f10BgpM2PathAttrTable. It is assigned by the agent at the point of creation of the f10BgpM2PathAttrTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2PathAttrIndex row instance values across rows of the f10BgpM2PeerAttrTable. It is used to provide an index structure for other tables whose data is logically per-peer, per-NLRI." ::= { f10BgpM2NlriEntry 9 } f10BgpM2NlriOpaqueType OBJECT-TYPE SYNTAX INTEGER { none(0), bgpMplsLabelStack(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object enumerates the type of the row that is pointed to in the table row f10BgpM2NlriOpaquePointer instance, if f10BgpM2NlriOpaquePointer is in fact not a zero length. f10BgpM2NlriOpaqueType is necessary since the data referenced by f10BgpM2NlriOpaquePointer is opaque to BGP. For example, in the case of RFC 3107, the label stack that is pointed to may occur in the mplsLabelStackTable from the MPLS-LSR-MIB, and the instance value of f10BgpM2NlriOpaqueType would be bgpMplsLabelStack(1)." REFERENCE "RFC 3107 - Carrying Label Information in BGP-4 draft-ietf-mpls-lsr-mib-08.txt" ::= { f10BgpM2NlriEntry 10 } f10BgpM2NlriOpaquePointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "Pointer to a row that decomposes the data that is opaque to the BGP MIB but is sent in the NLRI. This RowPointer has zero (0) length data instance if f10BgpM2NlriOpaqueType is none." ::= { f10BgpM2NlriEntry 11 } -- -- Adj-Ribs-Out Table -- f10BgpM2AdjRibsOutTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2AdjRibsOutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains on a per-peer basis one or more routes from the f10BgpM2NlriTable that have been placed in this peer's Adj-Ribs-Out." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 3.2" ::= { f10BgpM2Rib 2 } f10BgpM2AdjRibsOutEntry OBJECT-TYPE SYNTAX F10BgpM2AdjRibsOutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of BGP routes that have been placed into a peer's Adj-Ribs-Out." INDEX { f10BgpM2PeerIndex, f10BgpM2NlriAfi, f10BgpM2NlriSafi, f10BgpM2NlriPrefix, f10BgpM2NlriPrefixLen, f10BgpM2AdjRibsOutIndex } ::= { f10BgpM2AdjRibsOutTable 1 } F10BgpM2AdjRibsOutEntry ::= SEQUENCE { f10BgpM2AdjRibsOutIndex Unsigned32, f10BgpM2AdjRibsOutRoute RowPointer } f10BgpM2AdjRibsOutIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them." ::= { f10BgpM2AdjRibsOutEntry 1 } f10BgpM2AdjRibsOutRoute OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object points to the route in the f10BgpM2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 9.2" ::= { f10BgpM2AdjRibsOutEntry 2 } -- -- BGP Rib Path Attributes Table -- -- -- Path Attribute Counter -- f10BgpM2PathAttrCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the f10BgpM2PathAttrTable." ::= { f10BgpM2Rib 3 } -- -- Path Attributes Table -- f10BgpM2PathAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PathAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides per advertised network-prefix attribute data, as advertised over a peering session." ::= { f10BgpM2Rib 4 } f10BgpM2PathAttrEntry OBJECT-TYPE SYNTAX F10BgpM2PathAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains data about a given network prefix, per-prefix and per-advertising peer." INDEX { f10BgpM2PathAttrIndex } ::= { f10BgpM2PathAttrTable 1 } F10BgpM2PathAttrEntry ::= SEQUENCE { f10BgpM2PathAttrOrigin INTEGER, f10BgpM2PathAttrNextHopAddrType InetAddressType, f10BgpM2PathAttrNextHop InetAddress, f10BgpM2PathAttrMedPresent TruthValue, f10BgpM2PathAttrMed Unsigned32, f10BgpM2PathAttrLocalPrefPresent TruthValue, f10BgpM2PathAttrLocalPref Unsigned32, f10BgpM2PathAttrAtomicAggregate INTEGER, f10BgpM2PathAttrAggregatorAS InetAutonomousSystemNumber, f10BgpM2PathAttrAggregatorAddr F10BgpM2Identifier, f10BgpM2AsPathCalcLength Unsigned32, f10BgpM2AsPathString SnmpAdminString, f10BgpM2AsPathIndex Unsigned32 } f10BgpM2PathAttrOrigin OBJECT-TYPE SYNTAX INTEGER { igp(1),-- networks are interior egp(2),-- networks learned via the EGP protocol incomplete(3) -- undetermined } MAX-ACCESS read-only STATUS current DESCRIPTION "The ultimate origin of the path information." ::= { f10BgpM2PathAttrEntry 1 } f10BgpM2PathAttrNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address family of the address for the border router that should be used to access the destination network." ::= { f10BgpM2PathAttrEntry 2 } f10BgpM2PathAttrNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(4..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of the prefix in this row. Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. f10BgpM2LinkLocalNextHopTable will contain the linklocal scope nexthop. In the case that the mechanism documented in draft-kato-bgp-ipv6-link-local-00.txt is used and only a link local nexthop has been sent, , f10BgpM2LinkLocalNextHopPresent will be false and f10BgpM2PathAttrNextHop will contain the link local nexthop." ::= { f10BgpM2PathAttrEntry 3 } f10BgpM2PathAttrMedPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether or not the MED value is present. If it is not present, the f10BgpM2PathAttrMed object has no useful value and should be set to 0." ::= { f10BgpM2PathAttrEntry 4 } f10BgpM2PathAttrMed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This metric is used to discriminate between multiple exit points to an adjacent autonomous system." ::= { f10BgpM2PathAttrEntry 5 } f10BgpM2PathAttrLocalPrefPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether or not the LocalPref value is present. If it is not present, the f10BgpM2PathAttrLocalPref object has no useful value and should be set to 0." ::= { f10BgpM2PathAttrEntry 6 } f10BgpM2PathAttrLocalPref OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The originating BGP4 speakers degree of preference for an advertised route." ::= { f10BgpM2PathAttrEntry 7 } f10BgpM2PathAttrAtomicAggregate OBJECT-TYPE SYNTAX INTEGER { atomicAggregatePresent(1), atomicAggregateMissing(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific." ::= { f10BgpM2PathAttrEntry 8 } f10BgpM2PathAttrAggregatorAS OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet." ::= { f10BgpM2PathAttrEntry 9 } f10BgpM2PathAttrAggregatorAddr OBJECT-TYPE SYNTAX F10BgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute." ::= { f10BgpM2PathAttrEntry 10 } f10BgpM2AsPathCalcLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a" ::= { f10BgpM2PathAttrEntry 11 } f10BgpM2AsPathString OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability." ::= { f10BgpM2PathAttrEntry 12 } f10BgpM2AsPathIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value is a unique index for the decomposed AS Path in the f10BgpM2AsPathTable. It is assigned by the agent at the point of creation of the f10BgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2AsPathIndex row instance values across rows of the f10BgpM2AsPathTable." ::= { f10BgpM2PathAttrEntry 13 } -- -- As-4 byte AS_PATH -- f10BgpM2AsPath4byteTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2AsPath4byteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is present for BGP speakers that support the AS 4byte specification and are functioning as a router between 2-byte and 4-byte AS space." REFERENCE "draft-ietf-idr-as4bytes-04.txt - BGP support for four-octet AS number space" ::= { f10BgpM2Rib 5 } f10BgpM2AsPath4byteEntry OBJECT-TYPE SYNTAX F10BgpM2AsPath4byteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains the information for the AS 4-byte extension's NEW_AS_PATH and NEW_AGGREGATOR attributes." AUGMENTS { f10BgpM2PathAttrEntry } ::= { f10BgpM2AsPath4byteTable 1 } F10BgpM2AsPath4byteEntry ::= SEQUENCE { f10BgpM2AsPath4bytePathPresent TruthValue, f10BgpM2AsPath4byteAggregatorAS InetAutonomousSystemNumber, f10BgpM2AsPath4byteCalcLength Unsigned32, f10BgpM2AsPath4byteString SnmpAdminString, f10BgpM2AsPath4byteIndex Unsigned32 } f10BgpM2AsPath4bytePathPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value may only be true if this BGP Speaker is functioning as a router between ASs that are in 2-byte and 4-byte AS space. If this value is true, then the NEW_AS_PATH attributes are present and the 4-byte versions of the appropriate path attributes are in this row. If this value is false, then the following values will be present in the row: f10BgpM2PathAttrAggregatorAS - zero (0). f10BgpM2AsPathCalcLength - zero (0). f10BgpM2AsPathString - zero (0) length string. f10BgpM2AsPathIndex - zero (0)." ::= { f10BgpM2AsPath4byteEntry 1 } f10BgpM2AsPath4byteAggregatorAS OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The NEW_AGGREGATOR AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet." ::= { f10BgpM2AsPath4byteEntry 2 } f10BgpM2AsPath4byteCalcLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the calculated length of the NEW_AS_PATH according to the rules of the BGP specification. This value is used in route selection." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a" ::= { f10BgpM2AsPath4byteEntry 3 } f10BgpM2AsPath4byteString OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability." ::= { f10BgpM2AsPath4byteEntry 4 } f10BgpM2AsPath4byteIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value is a unique index for the decomposed AS Path in the f10BgpM2AsPathTable. It is assigned by the agent at the point of creation of the f10BgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2AsPathIndex row instance values across rows of the f10BgpM2AsPathTable. " ::= { f10BgpM2AsPath4byteEntry 5 } -- BGP 4 Path attribute AS Path Table. There is one row in -- this table for each AS which is advertised for a given -- route as provided from a peer. -- JMH -- We need one of these for the NewAsPath for the 4byte draft f10BgpM2AsPathTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2AsPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute AS Path Table contains the per network path (NLRI) AS PATH data received from the advertising BGP peer." ::= { f10BgpM2Rib 6 } f10BgpM2AsPathTableEntry OBJECT-TYPE SYNTAX F10BgpM2AsPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an AS path provided with a path to a network." INDEX { f10BgpM2PathAttrIndex, f10BgpM2AsPathSegmentIndex, f10BgpM2AsPathElementIndex } ::= { f10BgpM2AsPathTable 1 } F10BgpM2AsPathEntry ::= SEQUENCE { f10BgpM2AsPathSegmentIndex Unsigned32, f10BgpM2AsPathElementIndex Unsigned32, f10BgpM2AsPathType INTEGER, f10BgpM2AsPathElementValue InetAutonomousSystemNumber } f10BgpM2AsPathSegmentIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A per-AS path segment index. This will index a set of autonomous systems in an AS path which are part of the same sequence or set (as determined by the row value of f10BgpM2AsPathType, which should be the same value for each f10BgpM2AsPathTable entry indexed by the same (f10BgpM2PathAttrIndex, f10BgpM2AsPathIndex) pair)." ::= { f10BgpM2AsPathTableEntry 1 } f10BgpM2AsPathElementIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A per-AS element index. This will index a particular AS within a sequence or set of autonomous systems in an AS path." ::= { f10BgpM2AsPathTableEntry 2 } f10BgpM2AsPathType OBJECT-TYPE SYNTAX INTEGER { asSet(1), asSequence(2), confedSequence(3), confedSet(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of sequence in which this asPath was advertised as an attribute. Note that all asPath row instances for a given (f10BgpM2PathAttrIndex, f10BgpM2AsPathIndex) index pair will have their f10BgpM2AsPathType set to the same value. The values for f10BgpM2AsPathType are interpreted as defined in the base BGP document and the BGP AS Confederations document." REFERENCE "draft-ietf-idr-bgp4-16 RFC 3065 - BGP AS Confederations" ::= { f10BgpM2AsPathTableEntry 3 } f10BgpM2AsPathElementValue OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "An AS value for an AS the related NLRI traversed in the propagation of its advertisement. This value is to be interpreted in the context of the sequence implied by f10BgpM2AsPathIndex and f10BgpM2AsPathType (and, in sequence of the other table rows with the same value of f10BgpM2PathAttrIndex and f10BgpM2AsPathIndex)." ::= { f10BgpM2AsPathTableEntry 4 } -- BGP 4 Path unknown attribute. There is one row in -- this table for each attribute not known by this BGP -- implementation (or agent instrumentation), but provided -- from a peer. f10BgpM2PathAttrUnknownTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PathAttrUnknownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local BGP implementation or not otherwise capable of being returned from this agent. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of such unknown attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable)." ::= { f10BgpM2Rib 7 } f10BgpM2PathAttrUnknownEntry OBJECT-TYPE SYNTAX F10BgpM2PathAttrUnknownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an unknown attribute provided with a path to a network." INDEX { f10BgpM2PathAttrIndex, f10BgpM2PathAttrUnknownIndex } ::= { f10BgpM2PathAttrUnknownTable 1 } F10BgpM2PathAttrUnknownEntry ::= SEQUENCE { f10BgpM2PathAttrUnknownIndex Unsigned32, f10BgpM2PathAttrUnknownType Unsigned32, f10BgpM2PathAttrUnknownValue OCTET STRING } f10BgpM2PathAttrUnknownIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index for a row in this table." ::= { f10BgpM2PathAttrUnknownEntry 1 } f10BgpM2PathAttrUnknownType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The attribute type advertised with this unknown attribute by the peer." ::= { f10BgpM2PathAttrUnknownEntry 2 } -- Maximum size of the following is derived as -- 4096 max message size -- - 16 BGP message marker bytes -- - 2 BGP message size -- - 1 BGP message type (UPDATE with unknown attr) -- - 2 UPDATE routes length (even assuming no routes) -- - 2 UPDATE path attributes length -- - 1 path attribute flag octet -- - 2 unknown path attr type (in f10BgpM2PathAttrUnknownType) -- --------- -- 4070 bytes maximum per-message attribute value data f10BgpM2PathAttrUnknownValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4070)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of path attribute not understood by the base BGP-4 document. Octets beyond the maximum size, if any, are not recorded by this row object. " ::= { f10BgpM2PathAttrUnknownEntry 3 } -- -- Path Attribute Extensions -- f10BgpM2PathAttrExtensions OBJECT IDENTIFIER ::= { f10BgpM2Rib 8 } f10BgpM2PathAttrNonCapExts OBJECT IDENTIFIER ::= { f10BgpM2PathAttrExtensions 1 } f10BgpM2PathAttrCapExts OBJECT IDENTIFIER ::= { f10BgpM2PathAttrExtensions 2 } -- -- Path Attribute Route Reflection Extensions -- -- -- Originator ID Table -- f10BgpM2PathAttrRouteReflectionExts OBJECT IDENTIFIER ::= { f10BgpM2PathAttrNonCapExts 2796 } f10BgpM2PathAttrOriginatorIdTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PathAttrOriginatorIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Per prefix data pertinent to advertisement of a network prefix through an originator." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { f10BgpM2PathAttrRouteReflectionExts 1 } f10BgpM2PathAttrOriginatorIdEntry OBJECT-TYPE SYNTAX F10BgpM2PathAttrOriginatorIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains data pertinent to a network prefix as received through its originating BGP route reflector." REFERENCE "RFC 2796 - BGP Route Reflection" INDEX { f10BgpM2PathAttrIndex } ::= { f10BgpM2PathAttrOriginatorIdTable 1 } F10BgpM2PathAttrOriginatorIdEntry ::= SEQUENCE { f10BgpM2PathAttrOriginatorId F10BgpM2Identifier } f10BgpM2PathAttrOriginatorId OBJECT-TYPE SYNTAX F10BgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute." REFERENCE "This attribute is defined in [RFC2796]." ::= { f10BgpM2PathAttrOriginatorIdEntry 1 } -- -- Cluster table -- f10BgpM2PathAttrClusterTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PathAttrClusterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable)." ::= { f10BgpM2PathAttrRouteReflectionExts 2 } f10BgpM2PathAttrClusterEntry OBJECT-TYPE SYNTAX F10BgpM2PathAttrClusterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a cluster traversal provided with a path to a network." INDEX { f10BgpM2PathAttrIndex, f10BgpM2PathAttrClusterIndex } ::= { f10BgpM2PathAttrClusterTable 1 } F10BgpM2PathAttrClusterEntry ::= SEQUENCE { f10BgpM2PathAttrClusterIndex Unsigned32, f10BgpM2PathAttrClusterValue F10BgpM2Identifier } f10BgpM2PathAttrClusterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integral index for a row in this table." ::= { f10BgpM2PathAttrClusterEntry 1 } f10BgpM2PathAttrClusterValue OBJECT-TYPE SYNTAX F10BgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as received in the route advertisement will be preserved in the sequence of f10BgpM2PathAttrClusterTable rows (and the f10BgpM2PathAttrClusterValues in each row) as returned for a given f10BgpM2PathAttrIndex value, and the monotonically increasing sequence of f10BgpM2PathAttrClusterIndex values for that f10BgpM2PathAttrIndex." REFERENCE "This attribute is defined in [RFC2796]." ::= { f10BgpM2PathAttrClusterEntry 2 } -- -- BGP Communities -- f10BgpM2PathAttrCommunityExts OBJECT IDENTIFIER ::= { f10BgpM2PathAttrNonCapExts 1997 } f10BgpM2PathAttrCommTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PathAttrCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable)." ::= { f10BgpM2PathAttrCommunityExts 1 } f10BgpM2PathAttrCommEntry OBJECT-TYPE SYNTAX F10BgpM2PathAttrCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a community association provided with a path to a network." INDEX { f10BgpM2PathAttrIndex, f10BgpM2PathAttrCommIndex } ::= { f10BgpM2PathAttrCommTable 1 } F10BgpM2PathAttrCommEntry ::= SEQUENCE { f10BgpM2PathAttrCommIndex Unsigned32, f10BgpM2PathAttrCommValue F10BgpM2Community } f10BgpM2PathAttrCommIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index for a row in this table." ::= { f10BgpM2PathAttrCommEntry 1 } f10BgpM2PathAttrCommValue OBJECT-TYPE SYNTAX F10BgpM2Community MAX-ACCESS read-only STATUS current DESCRIPTION "A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics." REFERENCE "RFC 1997 - BGP Communities Attribute" ::= { f10BgpM2PathAttrCommEntry 2 } -- -- BGP Extended Communities -- f10BgpM2PathAttrExtCommTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2PathAttrExtCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable). XXX JMH - can not assign the OID until an RFC is published." ::= { f10BgpM2PathAttrNonCapExts 3501 } -- FORCE10 f10BgpM2PathAttrExtCommEntry OBJECT-TYPE SYNTAX F10BgpM2PathAttrExtCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an extended community association provided with a path to a network." INDEX { f10BgpM2PathAttrIndex, f10BgpM2PathAttrExtCommIndex } ::= { f10BgpM2PathAttrExtCommTable 1 } F10BgpM2PathAttrExtCommEntry ::= SEQUENCE { f10BgpM2PathAttrExtCommIndex Unsigned32, f10BgpM2PathAttrExtCommValue F10BgpM2ExtendedCommunity } f10BgpM2PathAttrExtCommIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integral index for a row in this table." ::= { f10BgpM2PathAttrExtCommEntry 1 } f10BgpM2PathAttrExtCommValue OBJECT-TYPE SYNTAX F10BgpM2ExtendedCommunity MAX-ACCESS read-only STATUS current DESCRIPTION "A value representing an extended community which was received with the route implied by the f10BgpM2PathAttr Index value of this row data. There are certain 8-octet long values which could be returned in this columnar row data that carry additional semantics." REFERENCE "BGP-EXTCOMM - BGP Extended Communities Attribute" ::= { f10BgpM2PathAttrExtCommEntry 2 } -- -- RFC 2545 link local nexthop -- f10BgpM2LinkLocalNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF F10BgpM2LinkLocalNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of link local nexthops as sent by RFC 2545 for IPv6 BGP Speakers." REFERENCE "RFC 2545 - Use of BGP-4 Multiprotocol Extensions for IPv6 Inter-Domain Routing" ::= { f10BgpM2PathAttrNonCapExts 2545 } f10BgpM2LinkLocalNextHopEntry OBJECT-TYPE SYNTAX F10BgpM2LinkLocalNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing the link-local nexthops as sent by a BGP speaker running RFC 2545 extensions for double-nexthops." INDEX { f10BgpM2PathAttrIndex } ::= { f10BgpM2LinkLocalNextHopTable 1 } F10BgpM2LinkLocalNextHopEntry ::= SEQUENCE { f10BgpM2LinkLocalNextHopPresent TruthValue, f10BgpM2LinkLocalNextHop InetAddress } f10BgpM2LinkLocalNextHopPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if and only if the BGP speaker is receiving IPv6 NLRI using the RFC 2545 double nexthop convention and it has received a link local scope nexthop in addition to the global scope nexthop." ::= { f10BgpM2LinkLocalNextHopEntry 1 } f10BgpM2LinkLocalNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This value contains an IPv6 link local address of InetAddressType of type ipv6z. This value is only present if f10BgpM2LinkLocalNextHopPresent is true." ::= { f10BgpM2LinkLocalNextHopEntry 2 } -- -- Conformance Information -- f10BgpM2Conformance OBJECT IDENTIFIER ::= { f10BgpM2 4 } f10BgpM2MIBCompliances OBJECT IDENTIFIER ::= { f10BgpM2Conformance 1 } f10BgpM2MIBGroups OBJECT IDENTIFIER ::= { f10BgpM2Conformance 2 } f10BgpM2MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the BGP4 mib." MODULE -- this module MANDATORY-GROUPS { f10BgpM2TimersGroup, f10BgpM2CountersGroup, f10BgpM2AsPathGroup, f10BgpM2As4byteGroup, f10BgpM2BaseGroup, f10BgpM2ErrorsGroup, f10BgpM2PeerGroup, f10BgpM2PathAttributesGroup } GROUP f10BgpM2MIBNotificationsGroup DESCRIPTION "The notifications group is completely optional, but highly recommended." GROUP f10BgpM2CommunitiesGroup DESCRIPTION "The communities group is mandatory only for those which support the BGP community attribute." GROUP f10BgpM2ExtCommunitiesGroup DESCRIPTION "The communities group is mandatory only for those which support the BGP extended community attribute." GROUP f10BgpM2RouteReflectionGroup DESCRIPTION "The communities group is mandatory only for those which support the BGP route reflection relationships." GROUP f10BgpM2AsConfederationGroup DESCRIPTION "The communities group is mandatory only for those which support the BGP confederation membership." GROUP f10BgpM2TimersGroup DESCRIPTION "This group is mandatory for all agent implementations." GROUP f10BgpM2CountersGroup DESCRIPTION "This group is mandatory for all agent implementations." GROUP f10BgpM2CapabilitiesGroup DESCRIPTION "This group is mandatory for all agent implementations." GROUP f10BgpM2AsPathGroup DESCRIPTION "This group is mandatory for all agent implementations." GROUP f10BgpM2As4byteGroup DESCRIPTION "This group is mandatory for all agent implementations." GROUP f10BgpM2BaseGroup DESCRIPTION "This group is mandatory for all agent implementations." GROUP f10BgpM2ErrorsGroup DESCRIPTION "This group is mandatory for all agent implementations." GROUP f10BgpM2PeerGroup DESCRIPTION "This group is mandatory for all agent implementations." GROUP f10BgpM2PathAttributesGroup DESCRIPTION "This group is mandatory for all agent implementations." GROUP f10BgpM2PeerConfigurationGroup DESCRIPTION "This group is optional for implementations that wish to support configuration via SNMP." GROUP f10BgpM2PeerRouteReflectorCfgGroup DESCRIPTION "This group is optional for implementations that wish to support configuration of route reflection via SNMP. Implementation of this feature requires support of the f10BgpM2PeerConfigurationGroup." GROUP f10BgpM2PeerAsConfederationCfgGroup DESCRIPTION "This group is optional for implementations that wish to support configuration of BGP AS Confederations via SNMP. Implementation of this feature requires support of the f10BgpM2PeerConfigurationGroup." GROUP f10BgpM2Rfc2545Group DESCRIPTION "This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545." ::= { f10BgpM2MIBCompliances 1 } f10BgpM2CommunitiesGroup OBJECT-GROUP OBJECTS { f10BgpM2PathAttrCommIndex, f10BgpM2PathAttrCommValue } STATUS current DESCRIPTION "Objects associated with BGP communities." ::= { f10BgpM2MIBGroups 1 } f10BgpM2ExtCommunitiesGroup OBJECT-GROUP OBJECTS { f10BgpM2PathAttrExtCommIndex, f10BgpM2PathAttrExtCommValue } STATUS current DESCRIPTION "Objects associated with BGP extended communities." ::= { f10BgpM2MIBGroups 2 } f10BgpM2RouteReflectionGroup OBJECT-GROUP OBJECTS { f10BgpM2RouteReflector, f10BgpM2ClusterId, f10BgpM2PeerReflectorClient, f10BgpM2PathAttrOriginatorId, f10BgpM2PathAttrClusterIndex, f10BgpM2PathAttrClusterValue } STATUS current DESCRIPTION "Objects associated with BGP route reflection." ::= { f10BgpM2MIBGroups 3 } f10BgpM2AsConfederationGroup OBJECT-GROUP OBJECTS { f10BgpM2ConfederationRouter, f10BgpM2ConfederationId, f10BgpM2PeerConfedMember } STATUS current DESCRIPTION "Objects associated with BGP confederation membership." ::= { f10BgpM2MIBGroups 4 } f10BgpM2TimersGroup OBJECT-GROUP OBJECTS { f10BgpM2PeerFsmEstablishedTime, f10BgpM2PeerInUpdatesElapsedTime, f10BgpM2PeerConnectRetryInterval, f10BgpM2PeerHoldTimeConfigured, f10BgpM2PeerKeepAliveConfigured, f10BgpM2PeerMinASOrigInterval, f10BgpM2PeerMinRouteAdverInterval, f10BgpM2PeerHoldTime, f10BgpM2PeerKeepAlive } STATUS current DESCRIPTION "Objects associated with BGP peering timers." ::= { f10BgpM2MIBGroups 5 } f10BgpM2CountersGroup OBJECT-GROUP OBJECTS { f10BgpM2PeerInUpdates, f10BgpM2PeerOutUpdates, f10BgpM2PeerInTotalMessages, f10BgpM2PeerOutTotalMessages, f10BgpM2PeerFsmEstablishedTrans, f10BgpM2PeerInKeepalives, f10BgpM2PeerOutKeepalives, f10BgpM2PeerInOpen, f10BgpM2PeerOutOpen, f10BgpM2PeerInRteRefresh, f10BgpM2PeerOutRteRefresh, f10BgpM2PrefixCountersAfi, f10BgpM2PrefixCountersSafi, f10BgpM2PrefixInPrefixes, f10BgpM2PrefixInPrefixesAccepted, f10BgpM2PrefixInPrefixesRejected, f10BgpM2PrefixOutPrefixes, f10BgpM2PrefixWdrawnByPeer, f10BgpM2PrefixWdrawnFromPeer } STATUS current DESCRIPTION "Objects to count discrete events and exchanges on BGP sessions." ::= { f10BgpM2MIBGroups 6 } f10BgpM2CapabilitiesGroup OBJECT-GROUP OBJECTS { f10BgpM2CapabilitySupportAvailable, f10BgpM2SupportedCapabilityCode, f10BgpM2SupportedCapability, f10BgpM2PeerCapAnnouncedCode, f10BgpM2PeerCapAnnouncedIndex, f10BgpM2PeerCapAnnouncedValue, f10BgpM2PeerCapReceivedCode, f10BgpM2PeerCapReceivedIndex, f10BgpM2PeerCapReceivedValue } STATUS current DESCRIPTION "Objects to report capabilities as received on BGP sessions." ::= { f10BgpM2MIBGroups 7 } f10BgpM2AsPathGroup OBJECT-GROUP OBJECTS { f10BgpM2AsPathSegmentIndex, f10BgpM2AsPathElementIndex, f10BgpM2AsPathType, f10BgpM2AsPathElementValue } STATUS current DESCRIPTION "Objects to report AS paths received on BGP NLRIs." ::= { f10BgpM2MIBGroups 8 } f10BgpM2As4byteGroup OBJECT-GROUP OBJECTS { f10BgpM2AsSize, f10BgpM2AsPath4bytePathPresent, f10BgpM2AsPath4byteAggregatorAS, f10BgpM2AsPath4byteCalcLength, f10BgpM2AsPath4byteString, f10BgpM2AsPath4byteIndex } STATUS current DESCRIPTION "AS Size objects." ::= { f10BgpM2MIBGroups 9 } f10BgpM2BaseGroup OBJECT-GROUP OBJECTS { f10BgpM2LocalAs, f10BgpM2LocalIdentifier, f10BgpM2VersionIndex, f10BgpM2VersionSupported } STATUS current DESCRIPTION "Basic objects in local BGP implementation." ::= { f10BgpM2MIBGroups 10 } f10BgpM2ErrorsGroup OBJECT-GROUP OBJECTS { f10BgpM2PeerLastErrorReceived, f10BgpM2PeerLastErrorReceivedData, f10BgpM2PeerLastErrorReceivedTime, f10BgpM2PeerLastErrorReceivedText, f10BgpM2PeerLastErrorSent, f10BgpM2PeerLastErrorSentData, f10BgpM2PeerLastErrorSentTime, f10BgpM2PeerLastErrorSentText } STATUS current DESCRIPTION "Errors received on BGP peering sessions." ::= { f10BgpM2MIBGroups 11 } f10BgpM2PeerGroup OBJECT-GROUP OBJECTS { f10BgpM2PeerInstance, f10BgpM2PeerIdentifier, f10BgpM2PeerState, f10BgpM2PeerStatus, f10BgpM2PeerConfiguredVersion, f10BgpM2PeerNegotiatedVersion, f10BgpM2PeerLocalAddrType, f10BgpM2PeerLocalAddr, f10BgpM2PeerLocalPort, f10BgpM2PeerLocalAs, f10BgpM2PeerRemoteAddrType, f10BgpM2PeerRemoteAddr, f10BgpM2PeerRemotePort, f10BgpM2PeerRemoteAs, f10BgpM2PeerIndex } STATUS current DESCRIPTION "Core object types on BGP peering sessions." ::= { f10BgpM2MIBGroups 12 } f10BgpM2PathAttributesGroup OBJECT-GROUP OBJECTS { f10BgpM2PathAttrCount, f10BgpM2AsPathCalcLength, f10BgpM2AsPathElementValue, f10BgpM2AsPathIndex, f10BgpM2AsPathString, f10BgpM2AsPathType, f10BgpM2NlriAfi, f10BgpM2NlriBest, f10BgpM2NlriPrefixType, f10BgpM2NlriPrefix, f10BgpM2NlriPrefixLen, f10BgpM2NlriSafi, f10BgpM2NlriOpaqueType, f10BgpM2NlriOpaquePointer, f10BgpM2NlriIndex, f10BgpM2NlriCalcLocalPref, f10BgpM2AdjRibsOutIndex, f10BgpM2AdjRibsOutRoute, f10BgpM2PathAttrAggregatorAS, f10BgpM2PathAttrAggregatorAddr, f10BgpM2PathAttrAtomicAggregate, f10BgpM2PathAttrIndex, f10BgpM2PathAttrLocalPref, f10BgpM2PathAttrLocalPrefPresent, f10BgpM2PathAttrMed, f10BgpM2PathAttrMedPresent, f10BgpM2PathAttrNextHop, f10BgpM2PathAttrNextHopAddrType, f10BgpM2PathAttrOrigin, f10BgpM2PathAttrUnknownIndex, f10BgpM2PathAttrUnknownType, f10BgpM2PathAttrUnknownValue } STATUS current DESCRIPTION "Attributes received on BGP peering sessions." ::= { f10BgpM2MIBGroups 13 } f10BgpM2PeerConfigurationGroup OBJECT-GROUP OBJECTS { f10BgpM2CfgBaseScalarStorageType, f10BgpM2CfgLocalAs, f10BgpM2CfgLocalIdentifier, f10BgpM2CfgPeerAdminStatus, f10BgpM2CfgPeerNextIndex, f10BgpM2CfgPeerConfiguredVersion, f10BgpM2CfgAllowVersionNegotiation, f10BgpM2CfgPeerLocalAddrType, f10BgpM2CfgPeerLocalAddr, f10BgpM2CfgPeerLocalAs, f10BgpM2CfgPeerRemoteAddrType, f10BgpM2CfgPeerRemoteAddr, f10BgpM2CfgPeerRemoteAs, f10BgpM2CfgPeerEntryStorageType, f10BgpM2CfgPeerError, f10BgpM2CfgPeerBgpPeerEntry, f10BgpM2CfgPeerRowEntryStatus, f10BgpM2CfgPeerIndex, f10BgpM2CfgPeerStatus, f10BgpM2CfgPeerConnectRetryInterval, f10BgpM2CfgPeerHoldTimeConfigured, f10BgpM2CfgPeerKeepAliveConfigured, f10BgpM2CfgPeerMinASOrigInterval, f10BgpM2CfgPeerMinRouteAdverInter } STATUS current DESCRIPTION "Configuration objects for BGP peers." ::= { f10BgpM2MIBGroups 14 } f10BgpM2PeerRouteReflectorCfgGroup OBJECT-GROUP OBJECTS { f10BgpM2CfgRouteReflector, f10BgpM2CfgClusterId, f10BgpM2CfgPeerReflectorClient } STATUS current DESCRIPTION "Configuration objects for BGP peers that support route reflection." ::= { f10BgpM2MIBGroups 15 } f10BgpM2PeerAsConfederationCfgGroup OBJECT-GROUP OBJECTS { f10BgpM2CfgConfederationRouter, f10BgpM2CfgConfederationId, f10BgpM2CfgPeerConfedMember } STATUS current DESCRIPTION "Configuration objects for BGP peers that support BGP confederations." ::= { f10BgpM2MIBGroups 16 } f10BgpM2MIBNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { f10BgpM2Established, f10BgpM2BackwardTransition } STATUS current DESCRIPTION "This group contains objects for notifications supported by this mib module." ::= { f10BgpM2MIBGroups 17 } f10BgpM2Rfc2545Group OBJECT-GROUP OBJECTS { f10BgpM2LinkLocalNextHopPresent, f10BgpM2LinkLocalNextHop } STATUS current DESCRIPTION "This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545." ::= { f10BgpM2MIBGroups 18 } END